Database Info

CTT mod improve performance eliminate lag updated 7/6

I've converted my CTT mod for the lg g3 to work with the nexus 7 this is now the official version as I've just been using it on a stock ROM with elementalx kernel and no problems so far so good should work with most ROMs.
Instructions,- Make a backup of your ROM and move your thermal files to a safe place. Then delete the originals Then boot into recovery flash mod and wipe caches reboot and enjoy
Right now these have only been tested on stock based ROMs but should work with any ROM
thermal mod 75 for stock kernel-
https://www.androidfilehost.com/?fid=24052804347769758
thermal mod 75 for elementalx kernel OC'd to 1.62 -
https://www.androidfilehost.com/?fid=24052804347769759
thermal mod 75 for elementalx kernel OC'd to 1.94 -
https://www.androidfilehost.com/?fid=24052804347769760
Please let me know what you think the more feedback the more improvement I can make
Thank Rob
Also here's the link to the original mod for the lg g3 to read up on what it does
http://forum.xda-developers.com/lg-g3/development/thermal-mod-t2907363?nocache=1

I want to try this with the new clean rom when it's released. I use your 75 mod on my g3. Can't wait.

What does the one for elementalX does?
I have elementalx's kernel but I just OC one step
Also, thanks for this mod, I have a G3 and have been following your mod since almost the start, and its been awsome, and also the fps unlock mod.
So glad your working on N7 too

Papote3 said:
What does the one for elementalX does?
I have elementalx's kernel but I just OC one step
Also, thanks for this mod, I have a G3 and have been following your mod since almost the start, and its been awsome, and also the fps unlock mod.
So glad your working on N7 too
Click to expand...
Click to collapse
there you go I made one for elemental x oc'd to 1.62 which should suit you in the op

Robshr said:
there you go I made one for elemental x oc'd to 1.62 which should suit you in the op
Click to expand...
Click to collapse
Thanks, will try and let you know

Robshr said:
there you go I made one for elemental x oc'd to 1.62 which should suit you in the op
Click to expand...
Click to collapse
Working great so far... What app do you use for displaying cpu frequency and temp on status bar?

Papote3 said:
Working great so far... What app do you use for displaying cpu frequency and temp on status bar?
Click to expand...
Click to collapse
I just use CPU temperature it has an overlay to display CPU in the status bar but only that I think I just open the app to see both the cpu temps and frequency as well as the battery temps

Is it necessary to clear Dalvik Cache after flashing this mode? It takes ages to complete that process, so I tend to avoid it as much as possible.
Also, isn't copy & pasting your modified thermal.conf file (after deleting the stock file) & then rebooting the device would be just fine?

Diljinder said:
Is it necessary to clear Dalvik Cache after flashing this mode? It takes ages to complete that process, so I tend to avoid it as much as possible.
Also, isn't copy & pasting your modified thermal.conf file (after deleting the stock file) & then rebooting the device would be just fine?
Click to expand...
Click to collapse
No it's not necessary and yes copying and pasting then rebooting would work
I just like to clear everything for good measure just to make sure there's nothing hanging around that would cause the mod not to work properly

Is it possible to unlock fps in this device?

I'm facing some weird unexpected issues with this mod.
I, first, copied & pasted the modified thermal file manually & rebooted the device. The device booted up normally but i experienced severe lag while using it. Normal operation like swiping through home screens etc seemed like at 5fps.
Thankfully, I had backed up before, so I restored it after proper clean up. Device worked normally. But I thought of giving it another chance, this time by following proper guide.
So I flashed the zip file, wiped Dalvik Cache/cache. But I experienced same issue as before. The device just got bogged down to crawl.
What exactly is causing this behaviour? Just to let you know, I use xposed on this device. Device is running Stock ROM with Stock Kernel & I used zip for Stock Kernel.

Just checked out the thermals in marshmallow and they have changed them to almost the same as my mod

Robshr said:
Just checked out the thermals in marshmallow and they have changed them to almost the same as my mod
Click to expand...
Click to collapse
Wow...if it was me, I wouldn't know if I'd be pleased or pissed off.........?

[MOD] MI4C Charged

Hello ladies and gentlemen,
After a lot of hours of work I present to you the complete suite for supercharging your Mi4C !
This flashable zip contains:
1) New icons from multirom.me (in my opinion better than miui.eu)
2) Thermal configuration from LG G4 (same SoC with Mi4C) to eliminate thermal throttling and overheating
3) Core management to improve battery life (like mpdecision)
4) Vulkan API for Adreno 418 (Increased GPU performance)
5) Interactive Governor - I/O scheduler - GPU tweaks for smoothness and better battery life
How to apply:
1) Download zip
2) Flash Mi-Globe rom (complete installation then reboot to recovery to flash the mod)
3) Flash Supercharged zip
4) Reboot and leave the screen on for 10 seconds
5) Re-apply MIUI default theme
6) Enjoy!
Warnings:
To enjoy the full Supercharged experience:
- DO NOT use GovTuner, LSpeed or other tweaks for CPU,GPU and generally kernel stuff !!! (leave GovTuner disabled in the Rom Builder)
- This is only for Mi-Globe ROM
- PLEASE LEAVE FEEDBACK. I have put a lot of time and effort into this so please do me a favor and comment on this. What is working, what isn't working, your experience, battery life, bugs, etc.
Comments like: "It works" / "Thanks a lot" / "Better battery life" do not help me make this better or fix things. Please be a little more specific (screenshots or describing your problem/experience helps a lot). THANKS IN ADVANCE FOR YOUR SUPPORT !!!
Updated Links:​In the new zip section you will find flashable zips for Nougat Developer ROM only!!!​Works with miui.eu , mi-globe and multirom.me​
This flashable zip contains:
1) Icons from multirom.me (in my opinion better than miui.eu)
2) Thermal configuration (cooler than old zips but lags a bit more while heavy gaming)
3) Core management to improve battery life (like mpdecision)
4) Vulkan API for Adreno 418 (Increased GPU performance)
5) Interactive Governor - I/O scheduler - GPU tweaks for smoothness and better battery life
Debloater:
Will remove a lot of system apps while applying the above tweaks, to delete xiaomi's environment apps and stuff the spy/sync stuff on your phone with xiaomi servers. I kept what I thought was necessary to keep maximum possible functionality
Debloater Alt:
Same as debloater, just different CPU settings. (People claim that this is more battery efficient than Debloater)
Debloater Light:
Deletes only a handful of system apps to keep the rom fully functional and full of features
Optimiser:
Just the above tweaks. Does not remove anything.
I cannot guarantee that this will work for every MIUI dev update but it should work
How to apply:
1) Download zip
2) Flash your rom
3) Flash zip
4) Reboot and re-apply MIUI default theme
5) Enjoy!
Download Link :
https://www.androidfilehost.com/?w=files&flid=172337
Hosts file for blocking Xiaomi and other domains from communicating with your phone:
(import with AdAway app)
1) Open menu in Adaway app
2) Hosts Sources
3) Press the "+" sign and enter http://t-ryder.de/hosts.txt
4) Go back to main screen and press download and apply to finish
MIUI De-Xiaomi Project (Work in progress / Testing ):
Alright so here it goes:
Credits to @Gyovany96 for the original work on Xiaomi Redmi Note 2
This is a somewhat risky flashable zip as it can make a lot of things break if not applied right. So if you don't know your way around, please make backups before trying anything. I'm not responsible for anything that happens to your phone.
If you are going to use this, it is required to have a nougat miui rom.
1) Firstly, you must do a clean install of xiaomi.eu rom (mi-globe and multirom.me will be fine as well, I think...) ( Wipe: System , Data , Dalvik Data , Cache ) ( tested on version 7.4.6 )
2) Flash DX MOD
3) Flash latest SuperSU (don't let twrp install supersu)
4) The first time you open your phone skip every setup (wifi, google account, etc)
-If you get force close of Provision.apk at google account setup skip, press the power button to bring the power menu, activate airplane mode and it should work after that)
5) After you get to launcher you can setup your wifi and google account (go into play store and it will resume the login procedure)
6) Install Link2SD and freeze Xiaomi Service Framework and com.miui.home.launcher.assistant
7) You are good to go
What you get with these zip?
1) Even more debloating work than debloater zips
2) New Power Saving CPU Tweak
3) Default thermal config (runs good in my opinion)
4) 3 way reboot menu for xiaomi.eu
5) New icons from @t-ryder
6) Latest MiXplorer and Adaway as system apps
7) Vulkan API GPU drivers
Credits:
@[B]t-ryder[/B] ( for providing and hosting the hosts file / go check his other projects ---> www.t-ryder.de )
@[B]a5m[/B] ( from 4pda.ru forums that provided a very good template for cpu tweaks to work on and give to you )

For those who need benchmarks I'm attaching a screenshot of cold run Antutu using stock Mi-Globe rom 7.2.23 and only this mod. The temperature rose up to 40C and fell to 35C very quickly

Will try if i find time this weekend. Sounds nice thought congrats for the effort
Στάλθηκε από το Mi 4c μου χρησιμοποιώντας Tapatalk

Hi. I get an error 6 while flashing this on TWRP. Using the TWRP for Nougat.

can the aicp flash it?

@solis_f this mod is for mi-Globe base Nougat rom only or this also can be use with mi-Globe base Lollypop (Miui8 v8.2.1)?
Sent from Libra Mi-4c

buzenm said:
can the aicp flash it?
Click to expand...
Click to collapse
I will make different version for aicp/rr. Give me some time tomorrow
mendro said:
@solis_f this mod is for mi-Globe base Nougat rom only or this also can be use with mi-Globe base Lollypop (Miui8 v8.2.1)?
Sent from Libra Mi-4c
Click to expand...
Click to collapse
Yes you can
I'm aware of an error 6. It's a typo, I will reupload tomorrow
Edit: Do aicp and RR support init.d ?

solis_f said:
I will make different version for aicp/rr. Give me some time tomorrow
Click to expand...
Click to collapse
thanks,i had tried this
https://forum.xda-developers.com/mi-4c/general/guide-advanced-interactive-governor-t3482740/page17
i feel it is used

solis_f said:
Yes you can
I'm aware of an error 6. It's a typo, I will reupload tomorrow
Edit: Do aicp and RR support init.d ?
Click to expand...
Click to collapse
@solis_f
Any chance to get the fix today mate?
Already flashed the mi-Globe v8.2.1 till i saw the error 6 from ur zip file & the post bout the error here
Sent from Libra Mi-4c

Link updated !
If someone can confirm that RR and AICP support init.d I will make a flashable zip for AICP/RR roms !

AICP init.d
solis_f said:
Link updated !
If someone can confirm that RR and AICP support init.d I will make a flashable zip for AICP/RR roms !
Click to expand...
Click to collapse
/system/etc/init.d directory exists on AICP. Does it mean it supports init.d?

LG*L70 said:
/system/etc/init.d directory exists on AICP. Does it mean it supports init.d?
Click to expand...
Click to collapse
I guess! If you put a runnable script in there does it automatically get executed on boot? If yes then it's fully functional.

solis_f said:
I guess! If you put a runnable script in there does it automatically get executed on boot? If yes then it's fully functional.
Click to expand...
Click to collapse
@cozmy13 
 @csolanol
Does it?

@solis_f
wow thats really great. Thank you.
Does the temperatures are more or less stable like in AndopaX Roms after running 3 tests+ ?

Danny94 said:
@solis_f
wow thats really great. Thank you.
Does the temperatures are more or less stable like in AndopaX Roms after running 3 tests+ ?
Click to expand...
Click to collapse
Didn't stress test this... You can find out yourself and post it here !

@solis_f
Im not on nougat bootloader, so i can`t atm ;D. But if you will release it for AICP i will try it with joy.
Edit: It looks like AICP doesn't execute inid.d files. Does someone can confirm that ? I tried to create logfile (maybe i did wrong ;D).
Maybe the Kernel doesn't support it atm?

Danny94 said:
@solis_f
Im not on nougat bootloader, so i can`t atm ;D. But if you will release it for AICP i will try it with joy.
Edit: It looks like AICP doesn't execute inid.d files. Does someone can confirm that ? I tried to create logfile (maybe i did wrong ;D).
Maybe the Kernel doesn't support it atm?
Click to expand...
Click to collapse
As far as I remember the folder was there but not supported. I will try to utilise supersu, I think it can execute scripts. Don't worry I will make one for AICP / RR . I will find a way

@solis_f
that's great, thank you. Maybe Magisk can execute it too (is now very common and inbuild root for AICP // i need for pogo ;D) ? As i remember RR should support init.d.

Danny94 said:
@solis_f
that's great, thank you. Maybe Magisk can execute it too (is now very common and inbuild root for AICP // i need for pogo ;D) ? As i remember RR should support init.d.
Click to expand...
Click to collapse
I know Magisk I'll find a way just give me some time. Senior computer engineering students don't have much free time and I'm new to developing for Android so please bear with me :fingers-crossed:

HI mate, dirty flashed the fixed one already on mi-Globe v8.2.1 but got stuck at Mi logo..
Anyway thx for ur effort
Sent from Libra Mi-4c

[MOD][All Variants ~ G93xx][6.0 - 8.0] Bett3r Battery and Performance with Kernel Twe

Hola Amigos!
Gonna do some Spanglish here... Well just that. Anyways; Welcome to the thread!​
The goal of this is to give you better performance and battery, and now supports ALL S7s!!!
Instructions -
1.) Download .zip
2.) Flash with FlashFire
3.) Enjoy​
A very in-depth explanation of what everything does can be found here
Downloads - ​
Qualcomm V1.7 -
Download
MD5: e4a12cdae58062b956d18d72bdd1f8be
Exynos V1.7 -
Download
MD5: 273f7e01c3ddc49cbb8d205fd4d9133d
If you're rooted with Magisk, make sure to copy the file "44tweaks" from /system/su.d into the service.d directory and give it full permissions (0777)
(/magisk/.core/service.d)
Thanks -​ @kevp75 - The usual, him being great
@king3opobn - Exynos info and testing

sweet.
will test next time I flash

Hi can i install this in G9350?i tried to flash but there is an error...
thanks

krisjuls said:
Hi can i install this in G9350?i tried to flash but there is an error...
thanks
Click to expand...
Click to collapse
What type of error? Make sure to mount /system on FlashFire

Craz Basics said:
What type of error? Make sure to mount /system on FlashFire
Click to expand...
Click to collapse
i use twrp and the error is: updater process ended with error: 7
error installing zip file 'external-sd/download/
craz_s7_Tweaks_v1.2.zip'
Thanks

krisjuls said:
i use twrp and the error is: updater process ended with error: 7
error installing zip file 'external-sd/download/
craz_s7_Tweaks_v1.2.zip'
Thanks
Click to expand...
Click to collapse
Try FlashFire and/or move to internal storage?
If still no cigar, I'll take a look tomorrow. For now if you'd like to use it you can extract it and in "system" take the file and put it in /system/su.d
If you do not have the folder su.d, create it and give it full permissions "0777" and then also give the script fill permissions inside the su.d folder "0777". Then reboot
Thanks

Craz Basics said:
Try FlashFire and/or move to internal storage?
If still no cigar, I'll take a look tomorrow. For now if you'd like to use it you can extract it and in "system" take the file and put it in /system/su.d
If you do not have the folder su.d, create it and give it full permissions "0777" and then also give the script fill permissions inside the su.d folder "0777". Then reboot
Thanks
Click to expand...
Click to collapse
I use flashfire and its done....'ll test the battery life & performance....Many Thanks

If I root and flash this in flashfire and then unroot, will the kernel tweaks still be working or no?

Illyakulinych said:
If I root and flash this in flashfire and then unroot, will the kernel tweaks still be working or no?
Click to expand...
Click to collapse
No, su daemon is needed for su.d to work.

krisjuls said:
I use flashfire and its done....'ll test the battery life & performance....Many Thanks
Click to expand...
Click to collapse
Can you ensure that it is running on boot please (go to /data and you'll see a log file at the bottom).
Then make sure the tweaks are taking... Go into kernel adiutor and go to the CPU tab (it's an app) and then make sure the governor is set to "interactive" and then select governor tunables on the little governor (second governor tunables button, closer to the bottom) and tell me what the first box says.
Thanks

Craz Basics said:
- I have also changed the scaling_max_freq so the CPUs can reach their full freq. (1593 mhz for little and 2150 mhz for big)​
Click to expand...
Click to collapse
Arent full frequency speeds different speeds ? like 2600Mhz on the big core for instance ?​

whitelightning76 said:
Arent full frequency speeds different speeds ? like 2600Mhz on the big core for instance ?
Click to expand...
Click to collapse
Yes, I've set 2160 mhz for big, and 1593 mhz for litte... the max.
Not sure if I understood your question fully, hopefully I answered it.

Here are some results with version 1.2 (brightness is just under half) -
I'm still working on making it better
* Those of you on non US qualcomm variants will probably get better than this!

I know, I know... Three posts in a row... Deal with it ;p
Version 1.3 is up! Check out changes in OP!

i want to install with TWRP how can i do u could convert for it

montafede said:
i want to install with TWRP how can i do u could convert for it
Click to expand...
Click to collapse
Should be able to
*unrelated to above*
I will be taking a break, not sure when ill be back. Ill still be active in threads but no updates until Im back.

Craz Basics said:
Should be able to
*unrelated to above*
I will be taking a break, not sure when ill be back. Ill still be active in threads but no updates until Im back.
Click to expand...
Click to collapse
tank u but no work with TWRP i used flashfire great work bro
best reguards take care

montafede said:
tank u but no work with TWRP i used flashfire great work bro
best reguards take care
Click to expand...
Click to collapse
TWRP still didn't work? And thanks!

Phone heating up, battery drain , performance gud
Sac23 s8 port / TGP kernel . / stock config.

hardik190 said:
Phone heating up, battery drain , performance gud
Sac23 s8 port / TGP kernel . / stock config.
Click to expand...
Click to collapse
With tweaks?

[MAGISK][mido]White Torch Light with Dual Flash for Camera and More

This is my personal MAGISK mod that I use. It's quite versatile as one can change it depending on what one needs. It's just a matter of uncommenting/commenting out the related lines, beginning with 'write /sys/....'
You'll find them in the common folder in services.sh and post-fs-data.sh.
Currently it has been set up to change the yellow torch light in custom ROMs to white while retaining the camera's dual flash.
You do not need to change anything if you just need the above functionality, just download and load the mod in Magisk.
However, if you wish to try out the other tweaks included then you'll need to unzip it, change the wanted values and zip them again to be able to flash it in Magisk; I use ZArchiver.
All these tweaks were cherry picked from the sample.sh script so generously provided by @DarthJabba9 in his thread.
If your looking for more cool tweaks and tweaks for devices without Magisk, you should check out his thread.
Tweaks available in this MOD:
-white flash light and/or torch (depending on what you change)
-limit max CPU scaling frequency (for more battery life)
-set idle GPU to 133 Mhz (for more battery life)
-correct screen retention for Tianma displays
-change the read ahead value for external storage
Read the codes in the services.sh and post-fs-data.sh to find out more.
This has been tested on Oreo but should work for Nougats as well
Enjoy!!
Download
CREDITS:
@DarthJabba9
WORD OF CAUTION:
Apart from using the values provided in the scripts by un-commenting them, do not try to change the values or lines on your own if you're not aware of what it does/will do. It can seriously damage your device and anyone including me shall not be held responsible for it.

'''Update:'''
'''07/10/2018'''
using only
write /sys/class/leds/led:torch_1/max_brightness 0

Thanks man.. ??

Will this work in lineageOS 15.1 (build 2018-06-18) on mido?
Will i have to unpack and repack it if i just want white light from notifications panel or just installing from magisk will be sufficient?
Sorry , I am a noob.

Yes
Yes, just use as is
OP updated for more clarity, thanks

This module of your magisk could have bad effect in custom kernel sir?

jhun3xx said:
This module of your magisk could have bad effect in custom kernel sir?
Click to expand...
Click to collapse
In which way?

thapaavijeet said:
In which way?
Click to expand...
Click to collapse
In speed and batt life sir.. Im using overclock kernel

jhun3xx said:
In speed and batt life sir.. Im using overclock kernel
Click to expand...
Click to collapse
If your just using the mod as is, without changing anything in it, then it does not do anything else other than change the torch light colour.

jhun3xx said:
In speed and batt life sir.. Im using overclock kernel
Click to expand...
Click to collapse
If your just using the mod as is, without changing anything in it, then it does not do anything else other than change the torch light colour.

Noob here!
I want this tweak:correct screen retention for Tianma display.
What to do in service.sh?Should i remove the"#"sign from that line or what?
Sent from my Redmi Note 4 using XDA Labs

arvarobert said:
Noob here!
I want this tweak:correct screen retention for Tianma display.
What to do in service.sh?Should i remove the"#"sign from that line or what?
Click to expand...
Click to collapse
Yeah, remove, zip and then load in Magisk.
However, I'm not sure that it will work coz I guess it has got something to do with the kernel too.
You may try and let me know, would be great!

thapaavijeet said:
Yeah, remove, zip and then load in Magisk.
However, I'm not sure that it will work coz I guess it has got something to do with the kernel too.
You may try and let me know, would be great!
Click to expand...
Click to collapse
Ok i will inform you, but how to know if it's working?
Sent from my Redmi Note 4 using XDA Labs

arvarobert said:
Ok i will inform you, but how to know if it's working?
Click to expand...
Click to collapse
I was trying this for sometime now and it appears that this only works with kernels that have support for KCal control.
However, I might be completely wrong considering that I'm a bigger noob than what you yourself claim to be....
I was trying to take screenshots of screen retention... :laugh: :silly:

thapaavijeet said:
Yeah, remove, zip and then load in Magisk.
However, I'm not sure that it will work coz I guess it has got something to do with the kernel too.
You may try and let me know, would be great!
Click to expand...
Click to collapse
Hey man, this module does not seem to work in RR unofficial by endless. This rom has XiaomiParts included in it wherein you can adjust the white/yellow led brightness. I only want white led in torch but dual led in camera flash.
Sorry for quoting this. Just needed to get your attention

chickentuna said:
Hey man, this module does not seem to work in RR unofficial by endless. This rom has XiaomiParts included in it wherein you can adjust the white/yellow led brightness. I only want white led in torch but dual led in camera flash.
Sorry for quoting this. Just needed to get your attention
Click to expand...
Click to collapse
could you get the output of these three commands from a terminal emulator or adb. You would require root privileges to run them
Code:
cat /sys/class/leds/led:flash_1/max_brightness
cat /sys/class/leds/led:torch_1/max_brightness
cat /sys/class/leds/torch-light1/max_brightness

thapaavijeet said:
could you get the output of these three commands from a terminal emulator or adb. You would require root privileges to run them
Click to expand...
Click to collapse
All done using default led settings
Edit: This is with the magisk module enabled

chickentuna said:
All done using default led settings
Click to expand...
Click to collapse
unpack the mod zip and remove the comment in the below line in service.sh
Code:
#write /sys/devices/soc/qpnp-flash-led-25/leds/led:torch_1/max_brightness 0
to
Code:
write /sys/devices/soc/qpnp-flash-led-25/leds/led:torch_1/max_brightness 0
zip all the files again and load it in Magisk.
Check if that works

So currently I'm running on these settings and this gives me super bright while torch along with dual flash as long as I focus and click.
Can someone out there please guide us on what the appropriate values should be before one of us ends up blowing our leds.
I could only figure out that one of them should be always set to zero for the white torch
Code:
write /sys/devices/soc/qpnp-flash-led-25/leds/led:torch_1/max_brightness 2000
write /sys/class/leds/led:flash_1/max_brightness 1000
write /sys/class/leds/led:torch_1/max_brightness 0
write /sys/class/leds/torch-light1/max_brightness 1000
changed the values again in hopes for moderation

thapaavijeet said:
unpack the mod zip and remove the comment in the below line in service.sh
to
zip all the files again and load it in Magisk.
Check if that works
Click to expand...
Click to collapse
Tried. Didn't work

Themes / Apps / Mods Update Your GPU Driver for more Performance!

Before starting you must understand what driver will be good for you
Best Battery Backup: 530 (Stock)
Balanced Battery Backup and Performance: 682
Maximum Performance: 707
FAQ:
Q) Some app is not working after using the drivers what to do?
A) Add that app to magisk hide and it will work since it's gonna use stock (530) drivers now
Q) Battery Backup is not good on drivers
A) ofcourse battery backup will be reduced and phone temperatures will be increased since you're squeezing out as much performance as possible from your phone
Q) So and So person is having better performance than me, why is that?
A) Every SOC (Processor) is built different (silicon lottery) so it is quite normal for some people to perform better than others
Q) My games have started stuttering after using the drivers what should I do?
A) This is because the driver wipes shader cache when installing to prevent unnecessary errors, just run your games for 10-15mins and you should be fine
Steps to Use:
First and foremost!
PLEASE flash Bootloop Protector in magisk and select Patch my boot image and then Reboot
Now choose the file you like and then go to magisk and flash it then reboot and you're done!
Performance Uplifts provided:
682: Provides 10-12% Performance Uplift over stock 530 drivers in GPU based scenarios
707: Provides 15% and above Performance Uplift over stock 530 drivers in GPU based scenarios
Whatever you do you're doing at your own risk so I won't take responsibility even if thermonuclear war breaks out or your mom throws you out of your house
Credits to the Developers are already included in the modules
Tested on Miui
(p.s some user said it's not stable on Awaken OS so watch out)

Current Bugs: Lawnchair is broken

BR4UTAL said:
Current Bugs: Lawnchair is broken
Click to expand...
Click to collapse
is this joke or should i worried before installing?
is this kernel modification?
will it work on Evolution X?

meihaco said:
is this joke or should i worried before installing?
is this kernel modification?
Click to expand...
Click to collapse
Lawnchair is a launcher.
https://lawnchair.app/

Can you please add stock drivers to flash if it wouldn't work on my firmware?

meihaco said:
Can you please add stock drivers to flash if it wouldn't work on my firmware?
Click to expand...
Click to collapse
To return to stock drivers you just need to remove the module from magisk and reboot