Related
with very little activity lately for the LGV20, especially with the unlocked US996 variant, I created a TWRP flashable package for the recent US99610k release. this zip flash every partition included in the latest KDZ package with the exception of recovery to keep TWRP. standard disclaimer applies, you do all of this at YOUR OWN risk! because I have not tested this yet, I can't verify whether 10k is rootable or not or if there's Anti-RollBack (ARB), so you need to be root'd before flashing this! failure to do so will probably cause you to lose root and/or lose TWRP! if 10k does have ARB you won't be able to downgrade. stay tuned on this.
NOTE1: you can find the partitions that will be flashed in the updater-script. to be extra cautious you can back up all of the partitions that will be overwritten with the following: dd if=/dev/block/bootdevice/by-name/{partition} of=/external_sd/backup/{partition}.img.
NOTE2: boot partition has been modified only to remove rctd, nothing else so I consider this to still be stock
Instructions:
download US99610.zip file listed below and put on microSD card
download your choice of root and put on microSD card, choose from either Magisk or SuperSU *Note: v12.0 of Magisk does not work with the LGV20 device in general and v14.0 is recommended.
backup any data from internal "SD card"
boot into TWRP (requires TWRP recovery to already be installed)
create a TWRP backup of the device
flash zip from microSD card by using "Install"
FLASH YOUR CHOICE OF ROOT - Flashing root is VERY IMPORTANT BEFORE REBOOTING!
reboot
profit!
Download:
US99610k.zip md5sum: 26da82660579673e5486e0361ff8c6e6
US99610l.zip md5sum: 01423ade5ba4977e1e8ae6d5bc244ecf
US99610n.zip* md5sum: bbde6e972305918712b3c51f03a1be10
US99610o.zip md5sum: 6019e92c6e0b3691689820b43b2b0c5d
US99610p.zip md5sum: 9875e4da163168c84ce479509bf7e19d
US99620f.zip* md5sum: 3AEBED11462D0F4A18D3FB9A4FDE95EB
* - unlocked non-US Cellular
for 20f (Oreo) please see this comment about updating TWRP and /data encryption https://www.reddit.com/r/lgv20/comm...s99610k10l10n10o10p20f_stock_rom_twrp/ed5olp6
Flashing Process (what flashing this zip does):
flash necessary partition images with the exception of recovery (to keep TWRP) from the KDZ
rename /system/recovery-from-boot.p to /system/recovery-from-boot.bak to prevent stock recovery from being installed on boot
wipes dalvik-cache and cache
BIG thanks to @McNutnut on guidance, as well as his script to put all of this together!
also thanks to @bullghost for the KDZ extractor (https://forum.xda-developers.com/showthread.php?t=2600575)
@Tilde88 for the original updater-script template w/root (https://forum.xda-developers.com/v20/development/us996-nrd90m-modded-notsostock-rom-v5-1-t3526542)
On your instructions portion it says h91810q.
storm68 said:
On your instructions portion it says h91810q.
Click to expand...
Click to collapse
haha, thank you for helping me correct that!
Hmmmm. Not tested you say.... Nervous I am. Have time to fix using computer I do not.
I've been running 10k for almost a week now and haven't seen any issues. I can't necessarily speak for this ZIP, though. Taking a glance at it things look good.
One thing I'd like to point out is an issue I saw reported by another user. They stated that after they flashed US Cellar US996 updates their Unlocked US996 device was being picked up as the US Cellular device when attempting to use the LG website bootloader unlock. This is most likely due to the US Cellular bootloader being flashed and the device reporting a US Cellular device ID. This hasn't caused any issues when your device has already been bootloader-unlocked but I would not suggest that users re-lock their bootloader when running this US Cellular firmware as you may risk running into problems unlocking. The same user had also reported that they just flashed the 10f kdz with LGUP to correct the problem but not a risk I'd like to see anyone take. Just a word of caution.
McNutnut said:
....
Click to expand...
Click to collapse
Thanks for the heads up.
Can you confirm what security patch 10k is up to on the 996? Any other documented updates/fixes?
nickthaskater said:
Thanks for the heads up.
Can you confirm what security patch 10k is up to on the 996? Any other documented updates/fixes?
Click to expand...
Click to collapse
September 1st
No documented changes that I've seen.
No issues flashing for me... didn't wipe data, works well.. not sure what the changes are though, looks like the same
leonzwrx said:
No issues flashing for me... didn't wipe data, works well.. not sure what the changes are though, looks like the same
Click to expand...
Click to collapse
If it's just a security update there won't be any visual differences.
I just installed and everything is as it was on 10h, save for the security date.
Thank you.
I flashed from US99610h to US99610k with no issues. I did not flash supersu or magistick after flashing the firmware because I need to use uverse app. So far 24 hours with no issue or crash.
I extracted this modem (actually I just removed everything else from the zip and modified the script file) because I wanted to see if the newer modem fixed some streaming issues I had. I'm on Lineage, but it looks like the modem keeps crashing. It works fine for a few minutes while streaming music but then crashes and takes the WiFi and LTE with it for a few seconds.
Shouldn't this updated modem work with 7.1?
Doug
Hello, my phone stuck in Logo LG. But before I was in the red triangle and I thought that installing this would work well. But now the bootloader has been blocked and I can no longer enter recovery. And I have happened to install by fastboot the recovery stock but I can not find that file anywhere.
Somebody can help me please?
Edit. The LGUP detect the phone but with unknow model. I put the dll in common and doesnt work. I dont know how to unbrick my phone
Edit 2: I think the OEM is blocked, because I tried the "fastboot oem lock" command and it says it was already blocked, then try to unlock it "fastboot oem unlock" and says: FAILED (remote: unknown command). I think it's because the box was unchecked in Settings> General> Development, but the problem is that I can not boot to activate it.
10l has been released for the US Cellular 996: https://lg-firmwares.com/lg-us996-firmwares/
I confirmed with a US Cellular rep that 10l includes:
KRACK Wi-Fi vulnerability fix
BlueBorne fix (for SPLs September 1 or later)
Anyone with enough brains and heart to put together a .zip for the plebs?
nickthaskater said:
10l has been released for the US Cellular 996: https://lg-firmwares.com/lg-us996-firmwares/
I confirmed with a US Cellular rep that 10l includes:
KRACK Wi-Fi vulnerability fix
BlueBorne fix (for SPLs September 1 or later)
Anyone with enough brains and heart to put together a .zip for the plebs?
Click to expand...
Click to collapse
thanks for the update... I've updated the first post to reflect a 10l TWRP ZIP that works just like 10k that you can flash... tested working on my own US996
dimm0k said:
thanks for the update... I've updated the first post to reflect a 10l TWRP ZIP that works just like 10k that you can flash... tested working on my own US996
Click to expand...
Click to collapse
Thank you very much!
Hey, I'm still on Dec 2016 stock using us996 us cellular. I can flash and keep root? That's what it sounds like but just confirming. If I do a clean flash, Magisk 14 works fine? Thx
strifej said:
Hey, I'm still on Dec 2016 stock using us996 us cellular. I can flash and keep root? That's what it sounds like but just confirming. If I do a clean flash, Magisk 14 works fine? Thx
Click to expand...
Click to collapse
Just follow the instructions in the OP. You need to reflash the Magisk 14 image immediately after flashing the 10L zip.
Anyone know if the radio in either one of these is improved? - I have an unlocked US996 (from B&H photo, not US cellular) and regardless if I am using Verizon or AT&T, my current ROM's (US99610f) radio is very weak in weak signal areas - much crappier phones get much better signal in weak areas. I am hoping a new radio has solved this. It is the only thing I dislike about the V20
Also, with my standard unlocked US996 (already bootloader unlocked via LG developer website) am I better off with 10k or 10l ?
WTF? said:
Anyone know if the radio in either one of these is improved? - I have an unlocked US996 (from B&H photo, not US cellular) and regardless if I am using Verizon or AT&T, my current ROM's (US99610f) radio is very weak in weak signal areas - much crappier phones get much better signal in weak areas. I am hoping a new radio has solved this. It is the only thing I dislike about the V20
Also, with my standard unlocked US996 (already bootloader unlocked via LG developer website) am I better off with 10k or 10l ?
Click to expand...
Click to collapse
Be careful, when I flashed this to my unlocked US996 on Verizon I lost all data, and furthermore could not restore stock without uppercut. I think it's bound to US cellular, these firmwares.
R-T-B said:
Be careful, when I flashed this to my unlocked US996 on Verizon I lost all data, and furthermore could not restore stock without uppercut. I think it's bound to US cellular, these firmwares.
Click to expand...
Click to collapse
I'm not sure what you did, no, you shouldn't have lost your data nor is it bound to US Cellular devices. I have the 10L zip running on my unlocked 996 without any issue. I flashed it via TWRP from 10K and didn't lose anything.
Hi. I received the security patch update for dec 2108 today. It was about 585 Mb file but it is not the lateat update. When we wil get android pie?
See pics.
notroid said:
Hi. I received the security patch update for dec 2108 today. It was about 585 Mb file but it is not the lateat update. When we wil get android pie?
See pics.
Click to expand...
Click to collapse
What G7 do you have?
G710EM
European model.
at least we get updates
+1
All European models (G710EM) should be updated to December update? Mine is on November update V10p-222-01 and no updates appears with OTA neither LG Bridge. Should I be worried? Maybe is better to install other ROM?
Dimas_sc said:
All European models (G710EM) should be updated to December update? Mine is on November update V10p-222-01 and no updates appears with OTA neither LG Bridge. Should I be worried? Maybe is better to install other ROM?
Click to expand...
Click to collapse
Got it yeasturday.
Runnig unlocked rooted.
(had to flash unpatched Boot for it to update)
maydayind said:
Got it yeasturday.
Runnig unlocked rooted.
(had to flash unpatched Boot for it to update)
Click to expand...
Click to collapse
yep received it too in Germany.
I removed root via magisk app, after that i got a "no command" boot loop. (thought my unpatched image was gone, found it later (nooooo).
if anyone faces this problem, just hit the power button fast and several times, phone shuts down, push and hold volume up until u see download mode.
now obtain your kdz file i used the new full rom.
my version before flash v10p, after flash v10q.
important is to select upgrade @Lgflash, to keep your stuff.
phone reboots and upgrade will be done after boot!
Actually I put a warning in the Magisk tred about that.
U can't uninstall root with magisk.. It will always do that. U have to manually flash unpached
I have lg g6 tmobile version i have 1/1/2019 sec. Update !
maydayind said:
Actually I put a warning in the Magisk tred about that.
U can't uninstall root with magisk.. It will always do that. U have to manually flash unpached
Click to expand...
Click to collapse
root is gone, update / upgrade worked so u can do it this way - didn't said it was easy
i don't make anyone responsible
HI
can anyone extract system apps from lg g7 ?
KarimAssiakh said:
HI
can anyone extract system apps from lg g7 ?
Click to expand...
Click to collapse
All?
maydayind said:
All?
Click to expand...
Click to collapse
Possible as you can ?☺
If you are free ofcurs ?
Me too. I thought it was Pie coming
Even Samsung manage to push every month a security update. This is sad.
I installed the G710EM10p_00_OPEN_EU_OP_1203.kdz (German region with November patch) but not I'm not receiving the OTA for the December patch update. If I manually install the G710EM10q_00_OPEN_EU_OP_1219.kdz with the LGUP tool can I mantain all the data/programs (like an OTA)?
Dimas_sc said:
I installed the G710EM10p_00_OPEN_EU_OP_1203.kdz (German region with November patch) but not I'm not receiving the OTA for the December patch update. If I manually install the G710EM10q_00_OPEN_EU_OP_1219.kdz with the LGUP tool can I mantain all the data/programs (like an OTA)?
Click to expand...
Click to collapse
If you do not receive ota it mean you flashed other region to you original firmware. You can update with LG UP as long you update with the same region (german for you). Any other region would wipe all data like factory reset.
Sent from my LM-G710 using XDA Labs
Dimas_sc said:
I installed the G710EM10p_00_OPEN_EU_OP_1203.kdz (German region with November patch) but not I'm not receiving the OTA for the December patch update. If I manually install the G710EM10q_00_OPEN_EU_OP_1219.kdz with the LGUP tool can I mantain all the data/programs (like an OTA)?
Click to expand...
Click to collapse
I did this procedure with version 10p and also version 10q after that. I stopped receiving OTA and LG Bridge updates (Bridge tries to download them but fails to actually install them), so now I just update via LGUP whenever there is a new patch. All my data/apps are fine, no need to restore from backups. My guess is that since my phone was originally branded, my imei is still tied to that, so now I can't use automatic updates any more. Not a huge problem, the LGUP procedure is easy and fast.
Anything new on 10q? Or just security patch?
fress said:
Anything new on 10q? Or just security patch?
Click to expand...
Click to collapse
Change LG keyboard
Enviado desde mi LM-G710 mediante Tapatalk
Im still on the Dec 1 security update.. Version PPO29.80-27
Has anyone got a newer update?
I received the January security update today
I am on Dezember,too.
kazushiyuuki said:
I received the January security update today
Click to expand...
Click to collapse
Please, can you boot into fastboot, run
Code:
fastboot getvar all
and from the output of that, provide the values of ro.product.model, ro.carrier and ro.build.version.full? (Note: ro.build.version.full is two lines)
Makes it easier to check for OTA URLs.
Im not receiving an update either, still on december patch, have had the phone for a week now
December patch.
Tesco UK
what is going on, why no update is coming ? im still on december patch and no 5Ghz Wifi support
Two days ago I received an update with the March 2019 security patch. I haven't noticed any other changes.
Phil122789 said:
Two days ago I received an update with the March 2019 security patch. I haven't noticed any other changes.
Click to expand...
Click to collapse
Software Channel?
EmiAndroid said:
Software Channel?
Click to expand...
Click to collapse
Retail US
I'm still stuck on the December 2018 patch for my G7 power xt1955-2. No update... I keep checking everyday. Anybody else here stuck on December 2018 besides me?
Sent from my moto g(7) power using Tapatalk
Still no update for reteu. What a disgrace.
Had a t-mobile sim in US Retail Software Channel (RETUS). Still no updates. Change to an AT&T sim and the software update (march 2019) popped right up. Strange.
alphahere said:
Had a t-mobile sim in US Retail Software Channel (RETUS). Still no updates. Change to an AT&T sim and the software update (march 2019) popped right up. Strange.
Click to expand...
Click to collapse
Its there an update after March?
carnivalrejectq said:
Its there an update after March?
Click to expand...
Click to collapse
Nope
mtlvince said:
I'm still stuck on the December 2018 patch for my G7 power xt1955-2. No update... I keep checking everyday. Anybody else here stuck on December 2018 besides me?
Sent from my moto g(7) power using Tapatalk
Click to expand...
Click to collapse
Same here. I'm in the RETAR channel.
I'm on March 1 security patch update XT1955-5 Running on Verizon Network. but by choice because May 1 Security Patch update firmware for the XT1955-5 "RETUS" channel is available at least in lolinet repository. And I'm here because tosetinf some stuff like why after flashing latest May 1 SPU brakes the modem while downgrading. So far "1st Bootloader updated" main reason modem breaks while going back. So far I just leave alone these May 1 Security Patch Update bins. When flashing back/downgrading just don't execute this commands to keep modem/baseband/radio working. If you happen to run the commands you will lose baseband and all and won't have a working network.
Code:
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
I created a thread with instructions on how to update your phone using your computer. I too wasn't receiving timely updates.
https://forum.xda-developers.com/g7-power/how-to/update-retail-moto-g7-power-manually-to-t3946233
So I did the manual update to the May security patch about three weeks ago.
Today I received a notification that the June security update was available. I click yes to down load and install and everything is fine.
Interestingly, my wife has the same phone, without the manual update to May and her phone still shows no updates available.
Looks like it might require a manual update for the phone to then receive update notices.
Sent from my moto g(7) power using Tapatalk
Just got June security patch. Yesterday.
If you want to repost this internal OTA to other websites (other than XDA itself), please ask me for permission, thanks.
Click to expand...
Click to collapse
WARNING!
This is early internal test build, so LATER OTA UPDATES CAN'T BE GUARANTEED!
If you don't have unlocked bootloader, you'll unable to roll back to stable build!
Please be careful when testing!
Click to expand...
Click to collapse
To users who have installed this internal build, please share your experience report here if you're willing to, thanks.
UPDATE: Thanks everyone. To fix microphone bug, please disable the microphone permission of the "Google" app.
You'll lose "OK Google" ability, but you can make telephone call properly.
Click to expand...
Click to collapse
Now I think it's time to bring you back to canary labs faster than beta labs.
Internal build version: PL2-4040-0-00WW-B01
It will be updated from: PL2-354N-0-00WW-B01, which is released October 2019 Security Update
As I've warned before - having an unlocked bootloader is strongly recommended.
So recent builds removed handy 874 dialing codes, we have to install them under recovery or Nokia Extensions.
Let me tell you how to verify:
1. Dial *#*#227#*#* to check current Version. If older than PL2-354N-0-00WW-B01, update to 354N before proceed.
FYI, 354N is October 2019 Security Update.
Alternately, you can use command "fastboot oem getversions" under fastboot mode / Download mode to check current firmware version.
2. Install PL2-4040-0-00WW-B01-354N-0-00WW-B01-update.zip with Nokia Extensions OTA Update module or adb sideload under recovery.
3. Reboot your phone.
That's it.
If minor fixes released, I will upload them as well, then use the same method to install it.
To root the phone, you may want to use Magisk 20 released October 12th, 2019 or newer.
Download link:
https://www.androidfilehost.com/?w=files&flid=300345
reserved
Installed it on my TA-1043.
OS installed fine over adb sideload, everything seems to be working, and it shows "5" next to my wifi icon - guess it's cause it's 5GHz, also the mobile data icon is still not AOSP and some custom thing. Menus kinda feel stutter-ish. Screenshots were broken on first boot.
alternate download links like google drive?
The update wont install
version no. L2-354O-0-00WW-B01
Update: "Photo" mode in stock camera is broken, says "Action not support: 708". Pro mode works fine
how to use magisk?
i tryed to patch boot on magisk and boot from ADB, but phone going n bootloop and doesn't want up
Hi @hikari_calyx I'm currently on the DRG-354N-0-00WW-B01 stock build version with an unlocked bootloader. But the version on the post has PLC. Also, if after sideloading this rom I decide to go back to the October PIE update how hard will that be. Thanks.
solozeeh said:
Hi @hikari_calyx I'm currently on the DRG-354N-0-00WW-B01 stock build version with an unlocked bootloader. But the version on the post has PLC. Also, if after sideloading this rom I decide to go back to the October PIE update how hard will that be. Thanks.
Click to expand...
Click to collapse
Hi. DRG is Nokia 6.1 Plus. This thread is for Nokia 6.1 (2018) which is PL2.
Getting error when the camera app is set to save photo to sd card.
---------- Post added at 03:24 PM ---------- Previous post was at 02:58 PM ----------
So right now for me on the Internal Stock... I cannot boot any TWRP of any kind or boot any patched magisk boot img. Has anyone been able to boot either TWRP or boot a patched boot img from magisk?
May I ask, can Nokia 6.1 plus use this rom?
joshclaudio said:
Hi. DRG is Nokia 6.1 Plus. This thread is for Nokia 6.1 (2018) which is PL2.
Click to expand...
Click to collapse
The confusion is caused by the fact that the Nokia 6.1 Plus (DRG) forum on XDA was recently deleted and now redirects here.
Apparently XDA is working to restore the DRG forum but it will take some time. Until that is done you can expect to see a lot of confused DRG users here on the PL2 forum. Please help them out if you can.
kazekiri said:
The confusion is caused by the fact that the Nokia 6.1 Plus (DRG) forum on XDA was recently deleted and now redirects here.
Apparently XDA is working to restore the DRG forum but it will take some time. Until that is done you can expect to see a lot of confused DRG users here on the PL2 forum. Please help them out if you can.
Click to expand...
Click to collapse
Yeah, noticed that, too. I've been experiencing redirect problems since yesterday. Anyway, I installed Android 10 leaked internal build on my Nokia 6.1 Plus with a locked bootloader :silly: . Been using it for more than 48 hours and I have not faced any major issue, except for the not working microphone during calls (plugging in earphones can suffice, though).
solozeeh said:
Hi @hikari_calyx I'm currently on the DRG-354N-0-00WW-B01 stock build version with an unlocked bootloader. But the version on the post has PLC. Also, if after sideloading this rom I decide to go back to the October PIE update how hard will that be. Thanks.
Click to expand...
Click to collapse
Here's the link for the DRG version for anyone who needs it. (Since the DRG forum is currently down.)
Only install this if you are using a Nokia 6.1 Plus or X6 (DRG). DO NOT try to install on Nokia 6.1 2018 (PL2).
https://androidfilehost.com/?w=files&flid=300344
Hi hikari calyx! Please help me downgrade my Nokia 6.1 to Android 9. Bootloader locked
kaktyys71 said:
Hi hikari calyx! Please help me downgrade my Nokia 6.1 to Android 9. Bootloader locked
Click to expand...
Click to collapse
"If you don't have unlocked bootloader, you'll unable to roll back to stable build!"
Literally on top of the OP post. As every downgrade/restoration method needs an unlocked bootloader, you can either unlock yours (paid external service), or wait for an eventual OTA zip (not guaranteed, as stated by the OP) that will bring you back on Android 10 official Beta/Release in a couple of weeks.
Solannae said:
"If you don't have unlocked bootloader, you'll unable to roll back to stable build!"
Literally on top of the OP post. As every downgrade/restoration method needs an unlocked bootloader, you can either unlock yours (paid external service), or wait for an eventual OTA zip (not guaranteed, as stated by the OP) that will bring you back on Android 10 official Beta/Release in a couple of weeks.
Click to expand...
Click to collapse
Project Treble A/B? B slot don't help me?
I guess it ils worth a try. Reboot to bootloader, then "fastboot getvar all" to get active slot and "fastboot --set-active=[a/b, your inactive slot]
The thing is, with official OTA updates, once the update is over and everything went well, the previous slot is not necessarily in a bootable/usable state anymore. It is not the case with most custom roms/gsi as you either update directly on the current slot or on the other without modifying the active one, so you can switch between slots without issues.
kaktyys71 said:
Project Treble A/B? B slot don't help me?
Click to expand...
Click to collapse
If you switch inactive slot to active slot and reboot... it will ask to do a factory reset. Perform the factory reset and you should be back to the Pie version. Use the fastboot commands Solannae posted above.
---------- Post added at 11:58 PM ---------- Previous post was at 11:36 PM ----------
Battery draining fast on Internal Android 10.
The battery drain was due to the Adguard app. Everything is working normal again.
My Pixel 3 G013A doesn't get Volte Update it stucks on October 2021 update... Whats the problem and how to get update officially?
Mine Hashu said:
My Pixel 3 G013A doesn't get Volte Update it stucks on October 2021 update... Whats the problem and how to get update officially?
Click to expand...
Click to collapse
Don't know what caused your problem, but if you can unlock your bootloader you can download the latest image at https://developers.google.com/android/images, or use the flash tool at that URL. Read the installation instructions at that URL.
dcarvil said:
Don't know what caused your problem, but if you can unlock your bootloader you can download the latest image at https://developers.google.com/android/images, or use the flash tool at that URL. Read the installation instructions at that URL.
Click to expand...
Click to collapse
Is there no any solution without unlocking bootloader?
Mine Hashu said:
Is there no any solution without unlocking bootloader?
Click to expand...
Click to collapse
I do not know any other solution.
I think you should be able to install the missing factory OTAs one after another using adb sideload without unlocking the bootloader. See https://developers.google.com/android/ota
yeswap said:
I think you should be able to install the missing factory OTAs one after another using adb sideload without unlocking the bootloader. See https://developers.google.com/android/ota
Click to expand...
Click to collapse
I done this, i downloaded latest OTA image, installed it successfully, but! There is no change nor resolved, still same...
Mine Hashu said:
I done this, i downloaded latest OTA image, installed it successfully, but! There is no change nor resolved, still same...
Click to expand...
Click to collapse
What exactly did you download?
Mine Hashu said:
I done this, i downloaded latest OTA image, installed it successfully, but! There is no change nor resolved, still same...
Click to expand...
Click to collapse
What did you expect to see change? AFAIK the only visible changes with the the three updates after October, 2021 are the build number and build date. The Android Security date does NOT update with these post-EOL updates, it stays at Oct, 2021.
yeswap said:
What did you expect to see change? AFAIK the only visible changes with the the three updates after October, 2021 are the build number and build date. The Android Security date does NOT update with these post-EOL updates, it stays at Oct, 2021.
Click to expand...
Click to collapse
The change is VOLTE I'm still on LTE which is very slowthere is no option to enable VOLTE
dcarvil said:
What exactly did you download?
Click to expand...
Click to collapse
I downloaded this one, with Feb 2022 Security Update Level which VOLTE supported too, but after installation there is no change, I'm still on Oct 2021 Security Update Level and there is no option to enable VOLTE
Mine Hashu said:
View attachment 5690985
I downloaded this one, with Feb 2022 Security Update Level which VOLTE supported too, but after installation there is no change, I'm still on Oct 2021 Security Update Level and there is no option to enable VOLTE
Click to expand...
Click to collapse
VoLTE Roaming Support is in the June 2022 update, not the Feb. update. I don't know what VoLTE support, if any, is in the Feb. update. Also, as @yeswap mentioned above, the security update level is not what you should be checking - it is frozen on Oct. 5 2021. Go to Settings, About Phone, Android Version and check the build number and build date to see what version you are actually running.
dcarvil said:
VoLTE Roaming Support is in the June 2022 update, not the Feb. update. I don't know what VoLTE support, if any, is in the Feb. update. Also, as @yeswap mentioned above, the security update level is not what you should be checking - it is frozen on Oct. 5 2021. Go to Settings, About Phone, Android Version and check the build number and build date to see what version you are actually running.
Click to expand...
Click to collapse
Oh yes! You are right VOLTE is in June update, by the way there is no June update for my build number may be thats the reason i didn't get VOLTE Update
Mine Hashu said:
The change is VOLTE I'm still on LTE which is very slowthere is no option to enable VOLTE
Click to expand...
Click to collapse
VoLTE is Voice over LTE, it has nothing to do with data speed.
There's no VoLTE toggle in Android settings with Android 12 on the Pixel 3. VoLTE is enabled by the carrier and not all carriers support it. Contact you carrier and ask them if they support VoLTE and if it's provisioned on your line.
You can see.if VoLTE is provisioned by dialing *#*#INFO#*#*. You can test if VoLTE is working by making a phone call. If your phone stays on LTE during the call VoLTE is working, if the phone switches to 3G during the call VoLTE is not working.
yeswap said:
VoLTE is Voice over LTE, it has nothing to do with data speed.
There's no VoLTE toggle in Android settings with Android 12 on the Pixel 3. VoLTE is enabled by the carrier and not all carriers support it. Contact you carrier and ask them if they support VoLTE and if it's provisioned on your line.
You can see.if VoLTE is provisioned by dialing *#*#INFO#*#*. You can test if VoLTE is working by making a phone call. If your phone stays on LTE during the call VoLTE is working, if the phone switches to 3G during the call VoLTE is not working.
Click to expand...
Click to collapse
Ok master! So why this sign in red?
I already told you, the post EOL updates do not change the Security date it stays at October.
yeswap said:
I already told you, the post EOL updates do not change the Security date it stays at October.
Click to expand...
Click to collapse
Ok