Hi.
I own a 3.1 rooted wifi only Xoom running BRD's 1.4.3 Tiamat kernel.
I finished completing these steps from this thread to try and enable marketenabler. Unfortunately, I'm stuck in this constant reboot now after the Moto logo.
I tried pressed volume up as soon as the Moto logo appeared, and the 'starting fastboot......' shows up but just hangs there. Has it anything to do with changing my build.prop?
This is the thread and the steps followed....
http://forum.xda-developers.com/showthread.php?t=1065698
**Ok, first of all, xoom must be rooted
Download verizon 3G build.prop from here http://dl.dropbox.com/u/6763988/build.prop.zip
Make a backup system/build.prop
Use, root explorer or adb to replace build.prop in system/
go to settings/application and clear data for market
Install marketenabler
Restart Xoom
Now open marketenabler, set to t-mobile us, start market end voila**
Would anyone be kind enough to help me?
I tried pushing my original backup file from my pc into the the directory of the new file I installed hoping to fix the problem with adb, when I reboot, my pc won't even recognise my xoom anymore.
It does connect now.
Any Help?
I figured I could still use Clockwork Recovery.
If I stuff up my system folder in my xoom, is there somekind of back up to replace it?
I've re-flashed my boot image and tiamat 1.4.3 to see if that would work. Did everything as it should, except, I'm still stuck in a boot loop.
???
sounds like youve messed something up bad, I would search the forums for the instructions on how to set it back to stock, read them carefully of course as doing this wrong could totally brick your device as with any modifications. Once youre back to Stock then you can carefully Root/Patch up to the version you want to..
tonyb15re said:
sounds like youve messed something up bad, I would search the forums for the instructions on how to set it back to stock, read them carefully of course as doing this wrong could totally brick your device as with any modifications. Once youre back to Stock then you can carefully Root/Patch up to the version you want to..
Click to expand...
Click to collapse
I think that's the way to go. Thanks anyway.
Hello, and hope this is the right place to post this.
So, without any knowledge about all this smatphone/android stuff, I finally got one by a really good price. An ot-983.
Some friends conviced me to root it. I found a way to do it and noticing all the bloatware from it's original carrier (this phone was carrier unlocked when bought) I decided to clean up a bit.
I ended up cleaning a lot of stuff that I simply didn't use from a \custapp\ folder in there.
Thing is, a day latter I got a notification of a firmware update and I just said yes.
The said update failed, complaining it seems about the lack of some of the deleted bloatware.
Now, here's when the lack of thinking shows.
Wondering about it, I decided to look around options and found the factory reset.
Being a new and mostly empty phone, I did it (wiped clean the sd too),
And there, it went all into hell!
After reboot, it can't get my wireless anymore (have to use a static ip workaround for it...)
Root Checker says it's not properly rooted (using the same rooting technique as the first time doesn't fix it)
superuser still seems to be working, altho it crashes now and then with some errors about permissions.
also, can't get BusyBox working because it says there's no su binary and I can't download an update for it.
In short, I guess I need to get this phone to it's basics, if possible unbranded.
I don't really know what I need for that, but here I am, reaching at you that might help
I guess I need a stock rom and a way to flash it.
I'd appreciate a lot any help on getting whatever it is needed.
*cheers
root alcatel ot 983
ahkronn said:
Hello, and hope this is the right place to post this.
So, without any knowledge about all this smatphone/android stuff, I finally got one by a really good price. An ot-983.
Some friends conviced me to root it. I found a way to do it and noticing all the bloatware from it's original carrier (this phone was carrier unlocked when bought) I decided to clean up a bit.
I ended up cleaning a lot of stuff that I simply didn't use from a \custapp\ folder in there.
Thing is, a day latter I got a notification of a firmware update and I just said yes.
The said update failed, complaining it seems about the lack of some of the deleted bloatware.
Now, here's when the lack of thinking shows.
Wondering about it, I decided to look around options and found the factory reset.
Being a new and mostly empty phone, I did it (wiped clean the sd too),
And there, it went all into hell!
After reboot, it can't get my wireless anymore (have to use a static ip workaround for it...)
Root Checker says it's not properly rooted (using the same rooting technique as the first time doesn't fix it)
superuser still seems to be working, altho it crashes now and then with some errors about permissions.
also, can't get BusyBox working because it says there's no su binary and I can't download an update for it.
In short, I guess I need to get this phone to it's basics, if possible unbranded.
I don't really know what I need for that, but here I am, reaching at you that might help
I guess I need a stock rom and a way to flash it.
I'd appreciate a lot any help on getting whatever it is needed.
*cheers
Click to expand...
Click to collapse
pls i need you to explain to me carefully , step by step how you rooted the alcatel ot 983 , pls i have searching for the past weeks on google without results , pls help me , pls explain carefully , thanks in advance , i will be so happy if you help , thanks again in advance
mohamm said:
pls i need you to explain to me carefully , step by step how you rooted the alcatel ot 983 , pls i have searching for the past weeks on google without results , pls help me , pls explain carefully , thanks in advance , i will be so happy if you help , thanks again in advance
Click to expand...
Click to collapse
I simply downloaded the drivers from alcatel website
and then used the root package from here: <can't post outside links. it's a thread on error-soft dot net
Followed the instructions on the .txt included and it worked.
After that I think I had to install Superuser app (from live store)
be careful. My problems came from deleting some stock apps included and then doing a firmware update.
so, don't delete stuff around if you're thinking in doing the upgrade.
I need original stock alcatel ot 983 rom
hi guys
I bricked my ot 983 after flashing with different alcatel models rom
can some one please give me a copy of original stock rom for alcatel one touch 983
please
my email [email protected]
maybe your handheld is a brand new and nobody mod it yet
be patient bro and keep searching in google with any keyword
help me make tutorial on youtube
ahkronn said:
I simply downloaded the drivers from alcatel website
and then used the root package from here: <can't post outside links. it's a thread on error-soft dot net
Followed the instructions on the .txt included and it worked.
After that I think I had to install Superuser app (from live store)
be careful. My problems came from deleting some stock apps included and then doing a firmware update.
so, don't delete stuff around if you're thinking in doing the upgrade.
Click to expand...
Click to collapse
bro i dont know much about android stuff , but pls can you make a tutorial on youtube like this you can help me and millions out there for rooting the phone , ps help and thanks so much in advance
ahkronn said:
I simply downloaded the drivers from alcatel website
and then used the root package from here: <can't post outside links. it's a thread on error-soft dot net
Followed the instructions on the .txt included and it worked.
After that I think I had to install Superuser app (from live store)
be careful. My problems came from deleting some stock apps included and then doing a firmware update.
so, don't delete stuff around if you're thinking in doing the upgrade.
Click to expand...
Click to collapse
Where did you get the upgrade from ?
My story is like this: rooted, uninstalled some bloat from system and after a factory reset I'm stuck in the initial setup wizard (after completing almost all stages from setup it crashes at the end, after connecting at the google account - tryed to ignore that step but either way it crashes). Fastboot works but adb don't.
I do have another identical phone Alcatel One Touch OT-983 but with no root, with no modifications. Is there a way to backup the original/stock image and flash it over the malfunctioning one and restore it??
I tried with the proprietary upgrade tool from Alcatel but no succes as it close saying I don't need an upgrade because it's the last version of software installed in my phone. I thought even to broke intentionally the rom but I'm afraid that the upgrade utility from Alcatel will let me down, as I read that another users didn't managed to complete successfully the upgrading process. Is there a way to trick the system that has a previous version of Android?
Thank you for taking your time to read this and hope someone has an idea to solve our problem.
Have a nice day guys, you can contact me at puiocku at gmail dot com.
Have someone this stock rom (for Alcatel One Touch 983 (Valencia)) ???
Here is a Alcatel OT-983 rom, not sure which country it is from: https://www.dropbox.com/s/g2ljtrpqru3uihm/rom 983.zip?m
Here is my o2 uk backup rom: http://www.mirrorcreator.com/files/C4VEKHEI/OT-983_backup_uk.rar_links
this .zip file contains the boot.img, system.img and recovery.img
Someone needs to create a clockwork mod recovery for our phones now.
here is the sourcecode for this phone: http://www.mirrorcreator.com/files/85KDRTYP/OT_983_20130103.7z_links
Can't get to recovery
I have a bricked rooted OT 983, by error i installed a ZTE Blade's CM9 ROM and now i can't get my phone to recovery by using ADB that is the only way, i have downloaded the stock ROM but i don't know how to install it. :crying: PLEASE HELP!!!!!!!!!!!!!!!!!!!!
i done the same
Please help!! my phone is stuck on
jrdsetupwizard has stopped
cant get past setup screen
Possible solution for getting back original ROM on "stuck" phone
ryanraven said:
i done the same
Please help!! my phone is stuck on
jrdsetupwizard has stopped
cant get past setup screen
Click to expand...
Click to collapse
I recently "semi bricked", if my Alcatel OT983, if that's possible. It would not boot fully and got stuck on the "jrdsetupwizard has stopped" screen.
Here's what I did. The issue with getting the Alcatel One Touch Upgrade software to work appears to be getting the correct USB Driver installed. There are a number of potential USB drivers. This phone needs the driver in the Alcatel One Touch Upgrade. The stock Windows one or the one used for rooting the phone using instructions from the errorsoft website from the oneofgod will not work with this upgrade procedure.
1. Download the Alcatel One Touch Upgrade software and install on your machine. Open up the folder where the software is installed.
Look inside the folder that is called USB Driver and look inside the appropriate folder for your type of Windows machine 64bit or 32bit (x86) and install that driver for USB - that is the correct one for the upgrade
2. Run the upgrade software whilst connected to the internet. Connect your phone when it is off. You should just get the Android icon i.e. not charging or anything else. The icon should just stay there all the time the process takes place.
3. The upgrade will download. It's when the process gets to about 70% that the phone the starts upgrading. It will take a few moments but when it starts progressing into the late 70s and 80s you should be well on the way. At least that's how it went for me and I got my phone back!
Hope this helps.
to Hajj_3 :
Tanks for share the ROM.. I need it to recover my friends phone..
I just got this phone, not looking to root it yet as theres no option for a custom rom yet.
didnt want to start a new thread as theres not really any section for this phone yet.
Everything was fine until i installed the firmware update. Now applications cannot access the mic. Some complain about it being in use by another app. others like video editor or sound recorder will record, but the video recorder there is no file, and sound recorder crashes when you hit stop.
Alcatels website is useless, wasnt working yesterday, today it is but cant find any contact details incase its a bug in there firmware. Everything works fine except for that. Which is annoying because i use RTA software and now it doesnt as it cant access the mic.
any ideas?
Hi guys,
I've rooted my phone with abd and udpate.zip a long time ago, and it was fine till some days ago it stopped from receiving calls and the home button does nothing when pressed, although in recovey mode it works.
I've done a hard reset, reflashed the recovery.img, system.img and boot.img I've found in this post with fasboot, but did not solve the problem.
I've tried a firmware update with Alcatel's own software but it just keeps saying my firmware is updated already. I've also tried to edit the proinfo file, but I don't know what to change in the file. You can see more about that method here: http://forum.gsmhosting.com/vbb/9772370-post8.html
My guess is that the files that are corrupted and preventing me from receiving calls are somewhere else than those img's I've flashed. Has anybody got a FULL backup of his rom (e.g. Rom Manager) so I can recover the phone completely?
Thanks!
upgrade software
bussand said:
I recently "semi bricked", if my Alcatel OT983, if that's possible. It would not boot fully and got stuck on the "jrdsetupwizard has stopped" screen.
Here's what I did. The issue with getting the Alcatel One Touch Upgrade software to work appears to be getting the correct USB Driver installed. There are a number of potential USB drivers. This phone needs the driver in the Alcatel One Touch Upgrade. The stock Windows one or the one used for rooting the phone using instructions from the errorsoft website from the oneofgod will not work with this upgrade procedure.
1. Download the Alcatel One Touch Upgrade software and install on your machine. Open up the folder where the software is installed.
Look inside the folder that is called USB Driver and look inside the appropriate folder for your type of Windows machine 64bit or 32bit (x86) and install that driver for USB - that is the correct one for the upgrade
2. Run the upgrade software whilst connected to the internet. Connect your phone when it is off. You should just get the Android icon i.e. not charging or anything else. The icon should just stay there all the time the process takes place.
3. The upgrade will download. It's when the process gets to about 70% that the phone the starts upgrading. It will take a few moments but when it starts progressing into the late 70s and 80s you should be well on the way. At least that's how it went for me and I got my phone back!
Hope this helps.
Click to expand...
Click to collapse
The problem is, the upgrade software link doesn't work anymore :\.
ht tp: // ww w1. alcatelonetouch.com/global-en/ support/download/one_touch_ 983.html
(remove of spaces, im a new user so they won't let me post one)
Is there anyway someone can find a link for it because i have been searching for ages and haven't found one.
http://www.alcatel-mobilephones.com/global-en/support/download/one_touch_983.html
Hello everybody.
I have a problem rooting a N9776 bought from DealExtreme, this is the 4.1.1 version with the 3.4 kernel.
The problem is that it is impossible to root, at least for me. I tried every method on this forum (and others) in order to get it root, unsuccesfully.
This is a list of the methods i tried (as i remember).
- Bin4ry exploit (the first that i tried)[http://forum.xda-developers.com/showthread.php?t=1886460]= I click on restore, the phone reboot, nothing happend (no root, no SU.apk)
- MT6577 CWMR Root (http://www.mediafire.com/view/?8mxvy0ey5yfdu59)=
First problem: I cannot generate the recovery.img, i used cygwin's command to do it, but the image does not appears
Second problem: I managed to get all the links in the guide, but i don't know if there are the versions needed in order to get this done, due to missing links in the guide itself.
Third problem: cygwin says: "perl v5.14.0 required, v5.10 used", and i don't know how to upgrade perl .. or what the hell perl.
-SP Flash (tool http://colonelzap.blogspot.co.uk/search?q=n9770): I loaded the scatter file, pressed the "download" button, take of my N9776 battery, USB pluged in, put the battery back on, the process starts for like 2 seconds, and boom, error (BROM ERROR: S_FT_NEED_DOWNLOAD_ALL_FAIL (4050)).
Im getting a little bit to frustrated, and just to be clear, i will say two things:
1- I'm a complete and absolute noob on all this, i never rooted a phone before (only a tablet, wich was easy).
2- My english isn't perfect (as you can notice), so, sorry for that.
Can somebody help me with this?
Rooting N9776
Cocoxxx said:
Hello everybody.
I have a problem rooting a N9776 bought from DealExtreme, this is the 4.1.1 version with the 3.4 kernel.
The problem is that it is impossible to root, at least for me. I tried every method on this forum (and others) in order to get it root, unsuccesfully.
This is a list of the methods i tried (as i remember).
- Bin4ry exploit (the first that i tried)[http://forum.xda-developers.com/showthread.php?t=1886460]= I click on restore, the phone reboot, nothing happend (no root, no SU.apk)
- MT6577 CWMR Root (http://www.mediafire.com/view/?8mxvy0ey5yfdu59)=
First problem: I cannot generate the recovery.img, i used cygwin's command to do it, but the image does not appears
Second problem: I managed to get all the links in the guide, but i don't know if there are the versions needed in order to get this done, due to missing links in the guide itself.
Third problem: cygwin says: "perl v5.14.0 required, v5.10 used", and i don't know how to upgrade perl .. or what the hell perl.
-SP Flash (tool http://colonelzap.blogspot.co.uk/search?q=n9770): I loaded the scatter file, pressed the "download" button, take of my N9776 battery, USB pluged in, put the battery back on, the process starts for like 2 seconds, and boom, error (BROM ERROR: S_FT_NEED_DOWNLOAD_ALL_FAIL (4050)).
Im getting a little bit to frustrated, and just to be clear, i will say two things:
1- I'm a complete and absolute noob on all this, i never rooted a phone before (only a tablet, wich was easy
2- My english isn't perfect (as you can notice), so, sorry for that.
Can somebody help me with this?
Click to expand...
Click to collapse
Rooting hardly known phones is so annoying isn't it? I have the HTC evo 3d, and that alone is hard to find root alternative root methods for.. I DIGRESS! Refer to this page. http://gleescape.com/posts/1466 its really easy, and its all automatic, and self explanatory. Please click thanks!!:cyclops:
Tell me about it .. i searched for days to get this phone rooted.
That's the Bin4ry process, and as i said, i tried it first unsuccesfully
Thanks for such a quick answer thought !
No one can help me with this? :crying:
Cocoxxx said:
No one can help me with this? :crying:
Click to expand...
Click to collapse
check my procedure here :
http://forum.xda-developers.com/showthread.php?p=43067087&posted=1#post43067087
Rod, master sushi
Hello xDA family I'm in need of serious help with
n9776 mtk6577 e1911_v77_gq2000_a41_6628_v20
I messed up and flashed the wrong ROM in sp flash and flashed the preloader, I still get PC connection without tp but every so called stock n9776 mtk6577 e1911_v77_gq2000_a41_6628_v20 ROM I find fails or won't load the preloader
The only backup I have is in cwm I really looked for answers but im stuck and its been almost a week
Pleez help
Sent from my SGH-I317 using Tapatalk 2
Hello
I'm sorry for my English I'm a French user and I use google translate...
I am desperate, I have been trying for several weeks to root my phone to activate the VOLTE.
I can't achieve anything. I just managed to unlock the bootloader.
no matter how much I use kingroot or magidesk I don't understand anything and I can't get anywhere... the guides I find on the internet are not detailed enough for a beginner like me and I download heaps of files without understanding what it serves me or how to use them....can someone help me? step by step in this manipulation? or give me a reliable tool
thank you so much for your help and sorry for the bother
Please refer to my post. May make it help or not.
When I try to burn rom with TWRP, img burns but it doesn't start and zip gives an error and cannot burn.
When I first burned custom ROM (unofficial AEX), it did not start, so when I deleted the data from TWRP, it seems that I deleted things that should not be erased, so even if I burn it from the zip file, with the error message in the image below I...
forum.xda-developers.com