Hello
As you can see i'm new here, so hello to you all.
I have the following problem with my Oneplus One.
In the past i rooted my phone, put on TWRP and flashed a Rom on it.
Yesterday i wanted to install another Rom on my device so i did what i normally do, put on a Rom, deleted everything (also data) and flashed it. But the phone always gave the same error with different roms, my phones name was not mentioned.
I looked it up and i thougth i found a sollution, my TWRP version was out of date (it was stil version 2.8.7.0). So i wanted to update it using TWRP. I put on the TWRP version 3.3.1.0 image on the phone and flashed it. It said the flash was succesfull and completed. I shut down the phone and restarted it to enter the new TWRP version.
Problem is, the phone did not start up, i only get the Oneplus One logo.
If i connect the phone to my pc (windows 10) my computer doesn't recognize my phone. It is not in the my pc list. I can see it in the devices in configuration as an uknown device (android).
I searched over the entire internet (or just a very small part of it ) and found that i should upgrade my android usb drivers. I downloaded them, but the computer says i already have the latest drivers.
I think i might flashed a wrong version of TWRP on my phone and that's why it's stuck.
I can start it up in fastboot mode. I think, so, i can see the fastboot mode logo but it is not so bright.
Then i tried to enter my phone with ADB through command prompt.
So i got the ADB files (platform tools), put them in a folder under C:, added them to the environmental variables path and restarted my computer.
But if i want to use a command with ADB, i get the error that "program 'adb' failed to run : there is no application linked to the given up file for this operation. (i had to translate it, because on my pc it's mensioned in Dutch).
So the problem is that my pc doesn't recognise my phone, or not correct so i can't enter it and there is a problem with the ADB.
I'm not that smart in all this stuff and all my info and actions come from the world wide web. It's not my primary phone so i don't mind experimenting with it.
Anybody that can help me?
Sorry if my English is not that well written.
If you need additinal info, shoot.
Thanks in advance
Related
I just got a new mytouch because i lost my old one :/
last time i did the rooting through the gold card method, now i tried the one click method and it went horribly wrong, i belive i got root, i tried to boot up with a new image but i just stays stuck on the mytouch logo, i can go into fastboot, but when i try to go through fastboot through my computer, the computer doesn't recognize my phone(it doesnt show the serial number) should i install the drives all over again? right now i have i connected to my computer through usb, and it says "fastboot usb".
i have looked though the forums but i didnt find a specific answer, so please if im going to get bombed, all im asking is for a little help.
thanks in advance
ok so..
ok so i fixed my drivers and it detects my phone, but now when i am trying to fastboot it it doesnt let me
you are sure you installed the drivers correctly? can you make it to the recovery screen?
if u try adb devices in cmd using adb from sdk does it give you something like HT9623465? cos that should be fine, also if you're using the sdk try uninstall the driver and then copy the 'usb driver' folder contents from the sdk into the 'tools' folder so everythings in the same place and then refer to that directory for driver installation (windows detects it as android 1.0 device when in fastboot and the drivers are different from normal mode). forgive me if im wrong
So I have a LG p506 and I recently installed cyanogen-mod 10.1 on it. I had to use the November release as the newest one wouldn't load past the cyanogen logo(i let it run for a couple hours). Everything seemed to work great after that. So I put the phone in my backpack for a later date.
When i finally pull it back out the battery was completely dead, and plugging the phone into usb would not charge it. I used an external device to charge it.
Basically the only thing the phone can do now is load the lg logo, go into emergency mode, and fastboot. I can erase and flash images, I have tried system boot and recovery multiple times with different files.
However I get the same two things every time i try something:
1. when I plug the phone into usb, the phone will do its thing then give a STALL GET_DESCRIPTOR error
2. fastboot devices shows something but I get a "?" where the serial number should be.
I am not proficient enough with fastboot to try other commands. Any one have some advice?
Also, I've tried every usb port I have, theres only one that works with the phone. One of the usb ports shows up normally on the phone but fastboot won't show any devices. I am running windows 7 ultimate x64.
The one thing i haven't tried is reinstalling windows 8 on one of my hdd's and seeing if it isn't a win7 issue. Ive used it with win 8 before and it didn't give the error message.
baked cake said:
So I have a LG p506 and I recently installed cyanogen-mod 10.1 on it. I had to use the November release as the newest one wouldn't load past the cyanogen logo(i let it run for a couple hours). Everything seemed to work great after that. So I put the phone in my backpack for a later date.
When i finally pull it back out the battery was completely dead, and plugging the phone into usb would not charge it. I used an external device to charge it.
Basically the only thing the phone can do now is load the lg logo, go into emergency mode, and fastboot. I can erase and flash images, I have tried system boot and recovery multiple times with different files.
However I get the same two things every time i try something:
1. when I plug the phone into usb, the phone will do its thing then give a STALL GET_DESCRIPTOR error
2. fastboot devices shows something but I get a "?" where the serial number should be.
I am not proficient enough with fastboot to try other commands. Any one have some advice?
Also, I've tried every usb port I have, theres only one that works with the phone. One of the usb ports shows up normally on the phone but fastboot won't show any devices. I am running windows 7 ultimate x64.
The one thing i haven't tried is reinstalling windows 8 on one of my hdd's and seeing if it isn't a win7 issue. Ive used it with win 8 before and it didn't give the error message.
Click to expand...
Click to collapse
fastboot doesn't show a serial number for that device. At least never has for me. If 'fastboot devices' lists something like
Code:
List of devices attached
???????? fastboot
then you're good to go.
damn that was my only thing to go on lol. nothing will get this phone to boot into recovery. im about to get a sd card reader for my pc to test and see if its bad.
baked cake said:
damn that was my only thing to go on lol. nothing will get this phone to boot into recovery. im about to get a sd card reader for my pc to test and see if its bad.
Click to expand...
Click to collapse
You can use fastboot to flash another recovery. Rashed should have a link in the OP for the 4.1.2 ROM you said you were using. You can continue to use the command-line if you like, but I did write a Windows app for flashing recoveries. Links in my signature.
shinobisoft said:
You can use fastboot to flash another recovery. Rashed should have a link in the OP for the 4.1.2 ROM you said you were using. You can continue to use the command-line if you like, but I did write a Windows app for flashing recoveries. Links in my signature.
Click to expand...
Click to collapse
ill give it a try, but i have tried just about every recovery file i can get my hands on and no luck, also looks like winds 8 doesn't want to acknowledge my phones existence. I downloaded and installed the driver from LG but still no luck, windows 8 is giving me a failed descriptor error as well.
ok so i have been stumbling around for a bit and noticed something possible wrong.
Windows 7 device manager shows my device, installed correctly, but listed as USB Modem Phone ADB Port.
Shouldn't this be a fastboot port? Since ADB is only available via the android operating system, and i can't get into my operating system, all i have is fastboot.
I have ran thru quite a few fast boot recovery pages, and I don't know what im missing here.
baked cake said:
ok so i have been stumbling around for a bit and noticed something possible wrong.
Windows 7 device manager shows my device, installed correctly, but listed as USB Modem Phone ADB Port.
Shouldn't this be a fastboot port? Since ADB is only available via the android operating system, and i can't get into my operating system, all i have is fastboot.
I have ran thru quite a few fast boot recovery pages, and I don't know what im missing here.
Click to expand...
Click to collapse
I'd say that was/is the correct port name. I don't have that device anymore so I cannot say for sure.
Sent from my LG-P769 using Tapatalk
ok, so this is a follow up on some things i have tried recently.
Since my last post i have:
1. put the sdcard into my tablet, and formatted it/ ran an error scan on it via windows.
2. i then flashed a recovery file via my phones fastboot, i pulled that card put it back in tablet to see what files it installed.
3. according to windows, flash recovery installed a .LOST folder with nothing in it, which is the same thing my tablet has on its internal memory, so i don't think there's anything wrong there.
4. phone still cant boot past LG logo(or recovery), or charge the battery when plugged in.
5. I still get a stall get_descriptor error when connected via usb, and commands such as fastboot reboot don't work, tho the phone will say its rebooting (it says its rebooting then just sits there and does nothing, command prompt will say action completed).
6. one thing i have tried as well, is telling windows not to automatically install drivers, then uninstalling my phone from device manager.
Whats interesting about this was that windows was installing its own ADB modem driver from it's own library every time i plugged in the phone. After disabling auto drivers, and reinstalling my LG drivers, the phone simply remains an unknown device.
Some things I have tried include pointing windows to the driver folder, both the downloaded folder and the folder windows installed it to. Neither worked.
The next thing I tried is the have disc option on both. Although there are setup information files in the install folder (about 50 of em), pointing the phone to each file one at a time did not work.
What did work, interesting enough was pointing the phone to a set of Naked Drivers I downloaded, although none of those drivers are specifically for my phone, and they only gave me the same problem I had when i had windows auto installing its own driver.
LG L5 612 - fastboot issue
Hi,
I have an LG L5 612.
I'm trying to perform below actions, but always get "waiting for device" ... and nothing happens.
fastboot reboot-bootloader
fastboot flash boot boot.img
"adb devices" lists my device correctly, while "fastboot devices" output nothing.
C:\ADB>adb devices
List of devices attached
LGOTMS840b676a device
C:\ADB>fastboot devices
C:\ADB>
C:\ADB>fastboot reboot-bootloader
< waiting for device >
Hi there,
Today i've received this tablet. All good and dandy until it notified me it has an update so obviously i've gone and do the update. Surprise.. after reboot, update installment and so on the device won't boot anymore at all, and recover mode doesn't work to enter.
I've found official ROM package on their site:
ftp.vonino.org/public/Firmware/Vonino_Tablets/Pluri%20Q8/Orange%20Version/Android%206.0/
Tablet can connect to the PC, but it isn't recognized because "some drivers" missing. How can i install this ROM on the tablet from my pc ?
Thank you.
Hi,
I can't find anything about it on xda or anywhere. You'll need to contact the manufacturer for drivers and instructions on flashing their firmware.
Good luck!
After i tried like almost the entire day i got the tablet in rescue mode or fastboot mode..
I've wiped/data or factory reset and the same happens... it stays in a loop when boot at logo.
I've let it to do so until the battery went dead from 100% and still the same.
I have official ROM but can't install it at all. I think the bootloader is locked?! And it doesnt even unlock it when using some fastboot commands
Also can't install nothing from SD card and when tryin to use ADB the PC can't see the device, but when using fastboot I can work on it.
In rescue mode i've done some root integrity check and at the end of the check some /system files are modified. I believe this is causing the entire problem.
denede said:
After i tried like almost the entire day i got the tablet in rescue mode or fastboot mode..
I've wiped/data or factory reset and the same happens... it stays in a loop when boot at logo.
I've let it to do so until the battery went dead from 100% and still the same.
I have official ROM but can't install it at all. I think the bootloader is locked?! And it doesnt even unlock it when using some fastboot commands
Also can't install nothing from SD card and when tryin to use ADB the PC can't see the device, but when using fastboot I can work on it.
In rescue mode i've done some root integrity check and at the end of the check some /system files are modified. I believe this is causing the entire problem.
Click to expand...
Click to collapse
Typically, on devices I know of, it's fastboot that you would use to flash factory images. So you should be good there. But again, I don't know if that is how your device works too. And it would also typically not matter what's been altered on your device, system wise, you would simply flash the appropriate images with fastboot.
So I'd still say you need to determine the correct procedure to flash the files you got from their site. Perhaps there site has instructions? Or a support number for help of its not working as it should?
I've talked with the support. They gave me a link with an official ROM, a different one that the one that was from the site. But they didn't even told how to use it, LOL.
Have the damn files and don't know what to do with them, OMG.
I've placed the zip archive on SD card and tried to use the option from rescue mode with 'update via sd card". The zip archive is visible but after i select it says Installation aborted :|
I've googled around and maybe my tablet needs to be at over 50% power... but it was plugged into the wall it should've worked.
edit: 100% and no good...
edit2: they sent me another e-mail with a pdf file in which it is explained how to flash their device.
Hi
Noob alert here.
I'm trying to flash a custom recovery (twrp) on a very old phone which has its bootloader unlocked. (the phone currently runs android 6.0, yes, that old...)
I read on the forums here that I need to use ADB from windows (Win10 here) in order to flash twrp onto the phone (to replace the stock recovery).
I DLed the neccessary files (platform tools), but it's just a bunch of files with nothing to actually install AFAICT...
MAny tutorials mention that I should just launch a CLI from within the folder containing the tools and then run ADB to flash twrp.
However, I get stuck at < waiting for any device > which, according to other tutorials, isa sign that drivers are not installed for my device in windows.
Some tutorial mention that I should INSTALL ADB (rather than just run it from CLI), so I'm starting to wonder what I am missing here.
- Should I INSTALL ADB? how?
- Should I install drivers for my device? It seems like my device is properly detected by Win10 and I couldn't find any driver to install anywhere.
I'm confused about what's going on.
Could you please help me out here?
Thanks a lot for your advice.
Best,
-a-
OK, I made a little progress I think. I'm not sure my issue is actually related to windows drivers but maybe I'm wrong.
Here's the deal:
When my phone is booted and connected to my PC,
adb device
spits up something : the phone is detected. Now after running
adb reboot bootloader
the phones reboots into bootloader mode (and displays the info that the bootloader is unlocked. But from now on,
adb device
in windows CLI outputs nothing : the phone is no longer detected.
Plus now the phone shows up as an unnknown device (fastboot2.0) in windows device manager. So? Missing driver I guess?
Running windows update found a driver for
Google Android Bootloader Interface
So I guess now it should work
I'll post the results
Thanks a lot
-a-
nope...
No luck
ADB still cannot see my device when in bootloader mode
asheenlevrai said:
nope...
No luck
ADB still cannot see my device when in bootloader mode
Click to expand...
Click to collapse
Actually it works!
Even though
adb devices
would not list anything when the phone wwas in bootloader mode, I was able to flash twrp
problem solved!
In the future some commands in Bootloader Mode require fastboot oppose to ADB.
Hello!
I have tried to upgraded my phone to Lineage 18.1 but it did not work.
This is what I did so far:
1) Installed the NEWEST TWRP and unfortunately I have deleted the OS. After that, the USB connection worked fine and I was able to see all files on my phone.
2) I've found a stock recovery.img that I have used and then the problem started. After installing that recovery.img file now I have TWRP (older version) 2.7.0.0 and:
a) when connected through USB , my computer does make sound, but it does NOT recognize my phone any more. Yes, I do have the newest USB drivers installed
b) when connected through USB and when I run this command: fastboot devices, then it DOES shows my device number, but it DOES NOT any devices using adb command.
c) when booting into fastboot, the phone shows just the black screen with the android faded icon.
d) I can boot into TWRP but there is no system or recovery files in there and it look like it's just useless.
I'm not sure what to do next. It looks like the phone is soft-bricked.
Any help will be appreciated.
Thank you
the first thing i would try is flashing twrp 3.6 (the newest) using fastboot. not sure why you would flash an old recovery version. if data recovery is not an issue then the opo is even fixable after a hardbrick (i used to have it). i used the color os method but that was ages ago. now there is a slightly easier way somewhere here on xda if you want the opo to in out of the box condition.
maybe try the whole thing using a secondary old laptop (if possible) or a virtual machine. otherwise i have no idea. sounds like a lot of trial and error might be needed. good luck.