Database Info

Ms bluetooth stack vs broadcomm stack

My touch pro seems to have real bluetooth issues with my JVC KD-NX5000 stereo system. My kaiser worked flawlessly with it but with the touch pro it wont pair at times and when it does it wont let me use any of the many functions that the stereo offers (voice dialing, downloaded phonebook, etc) I assume this is a problem with the ms bluetooth stack and was wondering how tough of a job it would be to switch to a broadcomm stack or if anyone has thought about making a custom rom with the broadcomm stack. Just curious if Im the only one with issues with wm 6.1 and bluetooth.

i have the same problem with my diamnd anbd jvc car audio

Slightly OT rant:-
I had the opposite problem with pioneer + broadcom...
Pioneer only looks for handsets which identify themselves as phone or smartphone, and my device identified itself as a pda.
I actually told pioneer about the problem, and rather than forwarding on to the developers, I got a stock reply:-
"This phone is not on our compatibility list" (so we don't care)
So I went and got an MS based phone (you can change it to smartphone with a regedit).
Never buying pioneer again...
- Anthony

Similiar issue with my opel carkit.
Tried to make the broadcom stack working, but got a memory error when opening its blue tooth manager.
After uninstalling, bluetooth didn't work at all anymore, needed to perform a hard reset.
Has anyone successfully installed the broadcom BT stack on the touchpro/raphael?

I found that my Touch Pro would pair and then drop out when connecting to my Kenwood DDX5032 car stereo bluetooth adaptor. I couldn't dial from the Kenwood kit, couldn't use A2DP (wouldn't even connect), and really couldn't use any Headset Profile functions at all.
I persisted with pairing and unpairing in different ways (you can initiate the pairing from the Kenwood itself rather than the phone), but nothing really worked.
Then trinode's post about changing a registry setting sent me down that track and now everything is working fine
I found the relevant setting from http://forum.xda-developers.com/showthread.php?t=290871, which is [HKLM\Software\Microsoft\Bluetooth\sys\COD], and then changed the HTC TP default value of '5898764' (decimal), to the value from my old Dopod838Pro, which was '5374228' (in decimal).
I didn't even need to repair the Kewood to the HTC TP - it just worked straight away, as if it said "Oh, sorry, did you want me to work? I thought you wanted me to be in 'stupid' mode! My bad - everything will work now."
So all good, and thanks to trinode for pointing me in the right direction.
Codenix.

After hard-resetting my Touch Pro to fix another separate issue, now this problem has come back and this time changing the COD value hasn't fixed it. It would appear my previous post may have attributed my success to the wrong thing
The search for the answer continues!

I found a firmware update for my Kenwood's bluetooth adaptor which fixed the problem. I don't know why it ever worked at all before this update, but there you go!
I'll create a separate thread to share this with others in case anyone else out there has a Kenwood bluetooth kit and a Touch Pro or a Diamond.
Thanks.

The thread I created re the Kenwood is at http://forum.xda-developers.com/showthread.php?p=2835805

@ Trinode
Pioneer sent my unit back, but never told me that my phone was not supported. Where did you flag the smartphone in the registry? Did it fix the BT connection/unti reboot issue? I had a AVIC F500BT (sold it) now have a AVIC X910BT same issue as the 500 had.

@ Trinode. I found the hack , tried it, but it still doesn't resolve my issue. Are there any other mods out there for the BT Stack prob?

[Q] bluetooth pairing issue, how to solve?

Hello, so i bougth this great phone, but bluetooth pairing(+autoconnect) is not working at all.
So to the proplem. My opo IS paired with my alpine car stereo, but everytime i go to my car opo asks IF i want to pair it...and obviously it should just connect automatically since i have paired it earlier but no.
Is this some known issue with opo or my device just making me headtache?
IF anyone have had same proplems i would love to hear how you managed to fix it.
PS. All my old phones automatically connected to car stereo after pairing once, so its most definatly opo issue and not the alpine stereo.

Okey, i got this solved by doing 2 things, but because im stupid and didnt test it between these actions i cqnt say which one did the job or was both needed.
1. I cleared "paired devices memory" from my alpine stereo.
2. I cleared paired device list from my handset(opo)
Hope this will help someone else in future who got proplems with alpine receiver and opo.

Problem solved! bluetooth pairing and buffering issues
Hey problem solved
I had bluetooth pairing and buffering problems and now everything works perfectly. what I did was flash OPO_OxygenOS_1_0-modem-flashable.zip (you can find it somewhere in google docs..don't remember the link)
anyway after doing that everything works perfectly.
I am running cyanogen 12.1 nightly build from 20150601
then I flashed the modem.
makkeonmies said:
Hello, so i bougth this great phone, but bluetooth pairing(+autoconnect) is not working at all.
So to the proplem. My opo IS paired with my alpine car stereo, but everytime i go to my car opo asks IF i want to pair it...and obviously it should just connect automatically since i have paired it earlier but no.
Is this some known issue with opo or my device just making me headtache?
IF anyone have had same proplems i would love to hear how you managed to fix it.
PS. All my old phones automatically connected to car stereo after pairing once, so its most definatly opo issue and not the alpine stereo.
Click to expand...
Click to collapse

oohh
AlonAsh said:
Hey problem solved
I had bluetooth pairing and buffering problems and now everything works perfectly. what I did was flash OPO_OxygenOS_1_0-modem-flashable.zip (you can find it somewhere in google docs..don't remember the link)
anyway after doing that everything works perfectly.
I am running cyanogen 12.1 nightly build from 20150601
then I flashed the modem.
Click to expand...
Click to collapse
Technical solution...too much ?

Hello All,
I too was facing issue with the Bluetooth connectivity. My headphone "Jabra Halo Smart" worked perfectly fine with other android devices but my OnePlus One. Issue i faced was that my at times my headphone would get detected but the headphone controls wont work. It was really irritating as i could not use the functionality of my headphones.
What i did was went into the Bluetooth options. Clicked on the setting icon beside my headphone and unchecked and rechecked the options.
Another action i performed was un-pairing the Bluetooth headphones from my device and resetting my headphones paired setting.
Third option was resetting the Jabra app that i installed on my mobile.
Fourth action is restarting your OnePlus device.
The above actions i performed in different orders. So one of them should surely help.
Suggestion provided by OnePlus Call Center: (which i did not need to try )
--> switch off the device
--> Press power+vol down button simultaneously
--> Select English language
--> wipe cache partition
--> wipe cache
--> reboot device
Advice while using Bluetooth headphones or speakers (especially Bluetooth devices having the functionality to connect multiple devices)...switch off the Bluetooth device and then switch off the Bluetooth of the host device (mobile, laptop, etc) and then connect the Bluetooth device to the other host device
Do not keep two host devices Bluetooth on...at times it causes to store the connection setting in the cache causing the Bluetooth device to act strangely. :cyclops: :cyclops: :cyclops:

[px5] bluetooth and torque issues

Hi
I am using a PX5 system and have an OBD2 elm227 (tried 2 different brands, 1x icarly and a white label product) and a iphone 7 paired.
The iphone BT works, i can call etc and in my BT settings menu all the devices are listed as paired etc..
Problem:
When i start Torque Pro and i want to choose the BT adaptor there is nothing shown...
According to Torque there is NO BT adaptor paired at all which i can choose from.
I use the latest offcial (paid) PRO version of Torque!
I rebooted the device already but this had no effect.
Is there a fix for this?
I am using malaysk rom on my PX5 device, so it is rooted and has xposed installed.
Who can help/advise
[update]
It worked after a reboot but it seems BT does not work after ACC off/on, only on a reboot or cold start.

Hi there, i also use OBD2 with torque and works like a charm!
Try to delete all the BT paired connections first and after that, pair first the OBD2 adapter and test it!
Regards.

1. Press reset button
2. Unpair
3. Start the phone app and pair from there
Go to torque app and select the obd

it seems when my system goes standby (acc off) the BT connection is lost after power on.
All paired devices are simply not working anymore...
Sometimes they aren's even visable anymore in BT menu after ACC off/on, on a cold start or system reboot they work again.
Is there a way that when the system goes to sleep (acc) these apps keep running in background or are restarted when ACC is turned on again (not cold start/boot).
Also other apps are killed and not started anymore on resume.
Also i cannot find any option too change the ACC time, in an other rom i could set this time for example to 10 seconds and if then returned on it would cold start.
On PX5 Malaysk rom i cannot find any menu for changing ACC sleep/shutdown time

it seems when my system goes standby (acc off) the BT connection is lost after power on.
All paired devices are simply not working anymore...
Sometimes they aren's even visable anymore in BT menu after ACC off/on, on a cold start or system reboot they work again.
Is there a way that when the system goes to sleep (acc) these apps keep running in background or are restarted when ACC is turned on again (not cold start/boot).
Also other apps are killed and not started anymore on resume.
Also i cannot find any option too change the ACC time, in an other rom i could set this time for example to 10 seconds and if then returned on it would cold start.
On PX5 Malaysk rom i cannot find any menu for changing ACC sleep/shutdown time

Search the thread for the no-kill mtcmanager.apk
This will keep all apps on resume
To be able to see they menu for shut down delay you have to be on an mcu higher than 2.48 I think.

I'm having a similar problem. Iphone via bluetooth and torque worked perfect until yesterday.
Now, Iphone is not on the paired devices, nor I can pair with it again. And torque sees the obd adapter, but can´t talk to ecu and I dont see the obd under bluetooth devices .
What shoud I do?

Audiofanx said:
I'm having a similar problem. Iphone via bluetooth and torque worked perfect until yesterday.
Now, Iphone is not on the paired devices, nor I can pair with it again. And torque sees the obd adapter, but can´t talk to ecu and I dont see the obd under bluetooth devices .
What shoud I do?
Click to expand...
Click to collapse
I have the exact problem. was able to pair iphone before, now can't pair anything

B3rt said:
Hi
I am using a PX5 system and have an OBD2 elm227 (tried 2 different brands, 1x icarly and a white label product) and a iphone 7 paired.
The iphone BT works, i can call etc and in my BT settings menu all the devices are listed as paired etc..
Problem:
When i start Torque Pro and i want to choose the BT adaptor there is nothing shown...
According to Torque there is NO BT adaptor paired at all which i can choose from.
I use the latest offcial (paid) PRO version of Torque!
I rebooted the device already but this had no effect.
Is there a fix for this?
I am using malaysk rom on my PX5 device, so it is rooted and has xposed installed.
Who can help/advise
[update]
It worked after a reboot but it seems BT does not work after ACC off/on, only on a reboot or cold start.
Click to expand...
Click to collapse
unfortunately I have the same issue - BT works till next power on of the radio...then only after reboot but I can not connect the paired devices...
I think, it wasn't so in original ROM...
I am using malaysk rom on my PX5 device too.

Ok I was able to get Bluetooth back full time by reinstalling maylaysk rom. Does anyone have a copy of the original torque that came with the factory rom? I have the paid version but I'm having issues with it

Same here hoping for original version of torque that came with px3 device.
Sent from my SM-G892A using Tapatalk

The torque app that came with the unit and torque pro did the same thing for me as soon as I went from MCU 2.75 to 2.8 for my HA MTCD unit.
See this thread for the torque app you need... It's at the bottom of post 1.
https://forum.xda-developers.com/an...asaita-mcu-updates-rockchip-px5-octa-t3575155

I just posted in Dasaita and Hal9k_ threads regarding my BT OBD.
1. Connecting but not recognized by apps
2. Not connecting to MCU anymore.
Both have been resolved with...
1. Update to latest MCU (my HA is 2.83).
2. Install/update rom to latest Dasaita or Hal9k_ rom.
3. Do a Factory Reset
4. Connect to BT OBD
5. EVERYTHING WORKS FLAWLESSLY NOW FOR ME.

OBD2 Bluetooth Issues with Oreo 8.0
demetry14 said:
I just posted in Dasaita and Hal9k_ threads regarding my BT OBD.
1. Connecting but not recognized by apps
2. Not connecting to MCU anymore.
Both have been resolved with...
1. Update to latest MCU (my HA is 2.83).
2. Install/update rom to latest Dasaita or Hal9k_ rom.
3. Do a Factory Reset
4. Connect to BT OBD
5. EVERYTHING WORKS FLAWLESSLY NOW FOR ME.
Click to expand...
Click to collapse
For all those wondering about the connection problems - I have spent the last week trying everything - then randomly saw a video on connecting one of these devices. Stock setting for the bluetooth is password 0000 - it showed changing the password under bluetooth settings to 1234 which is the stock setting for all OBD2 devices. I went into settings - deleted all bluetooth devices - changed the password to 1234 - searched - found the OBD2 sensor (BLUEDRIVER) and it instantly connected and showed in paired devices. Fired up BlueDriver App and BAM! shes working without a hitch - fired up Torque Pro Lite and bam - connected without a hitch - for others with ELM you need to download the App for ELM because it only works with certain devices. After all the work I did trying to get it to work it was really just one little issue with the handshake *being the password* since you cant enter the password from the Bluetooth device like you would from your phone. Setting them both to the same solved the issue.

Pineapple5809 said:
For all those wondering about the connection problems - I have spent the last week trying everything - then randomly saw a video on connecting one of these devices. Stock setting for the bluetooth is password 0000 - it showed changing the password under bluetooth settings to 1234 which is the stock setting for all OBD2 devices. I went into settings - deleted all bluetooth devices - changed the password to 1234 - searched - found the OBD2 sensor (BLUEDRIVER) and it instantly connected and showed in paired devices. Fired up BlueDriver App and BAM! shes working without a hitch - fired up Torque Pro Lite and bam - connected without a hitch - for others with ELM you need to download the App for ELM because it only works with certain devices. After all the work I did trying to get it to work it was really just one little issue with the handshake *being the password* since you cant enter the password from the Bluetooth device like you would from your phone. Setting them both to the same solved the issue.
Click to expand...
Click to collapse
That worked for me for a week... Now my OBD still connects, but my phone no longer auto connects.

pavllo1980 said:
unfortunately I have the same issue - BT works till next power on of the radio...then only after reboot but I can not connect the paired devices...
I think, it wasn't so in original ROM...
I am using malaysk rom on my PX5 device too.
Click to expand...
Click to collapse
good evening I have the same problem with bluetooth that does not work after a reboot, I want to know if you have find the solution? thank you
ps: i'm french sorry for spelling

Pineapple5809 said:
For all those wondering about the connection problems - I have spent the last week trying everything - then randomly saw a video on connecting one of these devices. Stock setting for the bluetooth is password 0000 - it showed changing the password under bluetooth settings to 1234 which is the stock setting for all OBD2 devices. I went into settings - deleted all bluetooth devices - changed the password to 1234 - searched - found the OBD2 sensor (BLUEDRIVER) and it instantly connected and showed in paired devices. Fired up BlueDriver App and BAM! shes working without a hitch - fired up Torque Pro Lite and bam - connected without a hitch - for others with ELM you need to download the App for ELM because it only works with certain devices. After all the work I did trying to get it to work it was really just one little issue with the handshake *being the password* since you cant enter the password from the Bluetooth device like you would from your phone. Setting them both to the same solved the issue.
Click to expand...
Click to collapse
After quoting a a large post with meaningless correlations, I found postive shockra!

PX3 - Bluetooth and A2DP apps disappeared after hard reboot

I recently purchased a car that has a PX3 head unit (no idea which "brand") running Android 7.1.1. It froze up, and I had to pull the fuse in order to get it to restart. Now that it's restarted, my Bluetooth, Phone & A2DP apps are missing from the home screen and the list of available apps.
Oddly, my phone is still connecting to CAR-KIT and even making phone calls works, but no information about the phone call displays since the Phone app isn't present. A2DP streaming audio isn't working at all.
Is there a way to restore these apps, or do they need to be re-installed in some fashion? Thanks!

Same issue for me, no phone, Bluetooth or cd player app...

Bobban_Deone said:
Same issue for me, no phone, Bluetooth or cd player app...
Click to expand...
Click to collapse
Check your Canbus settings to verify that the settings for the apps are enabled.

Hi!
Thanks, I checked the settings and found everything was checked in the boxes... So I just changed the logo and then rebooted the device. After this magic... All the apps that where missing reaperd and the DVD button started to work! Thank you, funny bug...

Question Mekede m300s bluetooth OBD2 help

I tried searching but found nothing relevant. I have a m300s 3gb ram 32gb rom Qled installed in my vehicle it works flawlessly but I have a Bluedriver OBD2 adapter that I would like to use to avoid purchasing another OBD2 device. On my phone I turn on Bluetooth I open the Bluedriver App and scan for the adapter and it pops up and you hit connect. So I downloaded the app on the head unit and open it and scan but nothing comes up. I have downloaded some other bluetooth apps and they see the device but I can't connect with the app still. Is there a workaround or configuration I can try to get this adapter to work? Or does someone have a recommened one that works with the unit. I'd love to use the bluedriver one because of the built in solutions they have for codes and problems with the vehicles.

You need to go in factory settings and enable OBD. Password for factory settings is 3368.