Database Info

I tried getting LineageOS 14.1, but ended up soft bricking my phone. Any guidance?

Currently working with my onePlus one, 64gb version.
I was using This guide in order to install lineageOs. i'm a little rusty with my oneplus one, and some stuff happened and I ended up soft bricking it lmao. Currently it has no OS because I formatted the data in twrp wipe. Currently all I can do is [VOL UP + POWER] to go into fastboot, and [VOL DOWN + POWER] to go into twrp 3.1.1-0. I honestly need help just starting from the beginning. Anybody can help a fellow oneplus lover(69) out?
P.S. I also have access to this guide in order to unbrick the phone, but that gives me some old cyanogen mod 11.0 kit kat stuff. I really don't want that. I want the new lineageOS 14.1!

onepluslover69 said:
Currently working with my onePlus one, 64gb version.
I was using This guide in order to install lineageOs. i'm a little rusty with my oneplus one, and some stuff happened and I ended up soft bricking it lmao. Currently it has no OS because I formatted the data in twrp wipe. Currently all I can do is [VOL UP + POWER] to go into fastboot, and [VOL DOWN + POWER] to go into twrp 3.1.1-0. I honestly need help just starting from the beginning. Anybody can help a fellow oneplus lover(69) out?
P.S. I also have access to this guide in order to unbrick the phone, but that gives me some old cyanogen mod 11.0 kit kat stuff. I really don't want that. I want the new lineageOS 14.1!
Click to expand...
Click to collapse
Boot into twrp,wipe data/factory reset,format cache then go to advanced and wipe system and dalvik cache then flash lineage os+gapps and reboot.:fingers-crossed:

Mr.Ak said:
Boot into twrp,wipe data/factory reset,format cache then go to advanced and wipe system and dalvik cache then flash lineage os+gapps and reboot.:fingers-crossed:
Click to expand...
Click to collapse
for some reason when i connect my phone via usb, it doesn't show up on my computer. i have no idea why, because it shows up when there is an OS and connected, but not in twrp

onepluslover69 said:
for some reason when i connect my phone via usb, it doesn't show up on my computer. i have no idea why, because it shows up when there is an OS and connected, but not in twrp
Click to expand...
Click to collapse
No worries,you can use adb sideload to flash files.
Here's how:http://www.droidviews.com/sideload-roms-mods-using-adb-sideload/

Mr.Ak said:
No worries,you can use adb sideload to flash files.
Here's how:http://www.droidviews.com/sideload-roms-mods-using-adb-sideload/
Click to expand...
Click to collapse
So I tried abd sideloading, but I got an error saying that the: updater process ended with error 7. i have no idea what to do at this point. i feel like every guide I follow step by step only to get an error

onepluslover69 said:
So I tried abd sideloading, but I got an error saying that the: updater process ended with error 7. i have no idea what to do at this point. i feel like every guide I follow step by step only to get an error
Click to expand...
Click to collapse
Did you followed the guide correctly? If the drivers are correct,you should not get any errors.Make sure to not forget extension while writing file name which in our case is ".zip".
Can you post a screenshot of cmd screen?

forgot to reply

Mr.Ak said:
Did you followed the guide correctly? If the drivers are correct,you should not get any errors.Make sure to not forget extension while writing file name which in our case is ".zip".
Can you post a screenshot of cmd screen?
Click to expand...
Click to collapse
http://imgur.com/feR5GkZ
http://imgur.com/j5qGhmB
currently legitimately lost. am i just a ****ing idiot? i didnt even have this much issues when i was rooting my oneplus 5...

onepluslover69 said:
http://imgur.com/feR5GkZ
http://imgur.com/j5qGhmB
currently legitimately lost. am i just a ****ing idiot? i didnt even have this much issues when i was rooting my oneplus 5...
Click to expand...
Click to collapse
Hey,nobody is an idiot on xda.
On which rom were you before flashing lineage os?

Mr.Ak said:
Hey,nobody is an idiot on xda.
On which rom were you before flashing lineage os?
Click to expand...
Click to collapse
cyanogenmod 11s which was like 4.4.x kitkat. but i formatted the phone , so that shouldn't even matter should it. currently i have no os.. :\

onepluslover69 said:
cyanogenmod 11s which was like 4.4.x kitkat. but i formatted the phone , so that shouldn't even matter should it. currently i have no os.. :\
Click to expand...
Click to collapse
No,that is the thing causing issues,i thought were on cos13.1.x but since you're on cm11s,you'll have to flash new firmware first which supports nougat.
There are many but this one works fine for me,https://www.androidfilehost.com/?fid=24385658843824392
Wipe data factory reset and cache then go to advanced and wipe system and dalvik cache then Flash the firmware,then lineage os and gapps and reboot,Profit.

Mr.Ak said:
No,that is the thing causing issues,i thought were on cos13.1.x but since you're on cm11s,you'll have to flash new firmware first which supports nougat.
There are many but this one works fine for me,https://www.androidfilehost.com/?fid=24385658843824392
Wipe data factory reset and cache then go to advanced and wipe system and dalvik cache then Flash the firmware,then lineage os and gapps and reboot,Profit.
Click to expand...
Click to collapse
omfg it finally worked. i got lineage os 14.1 with 7.1.2 nougat, and mini gapps thanks bro you saved me

onepluslover69 said:
omfg it finally worked. i got lineage os 14.1 with 7.1.2 nougat, and mini gapps thanks bro you saved me
Click to expand...
Click to collapse
Told you,you're not an idiot.

Wow. The latest lineage os update killed my phone too and I tried doing this but I don't understand how to flash

[GUIDE] Install Treble Roms on Honor 9

DISCLAIMER:
I'm not the developer of any of those Roms, so don't cry on me if your device gets bricked!
INTRODUCTION:
So, as many of you guys know, the Homor 9 is Treble compatible which means you can get any Treble Rom on it although the support of our device on XDA is really poor on our forum.
IMPORTANT ISSUES:
Since we don't even have an official TWRP for the Honor 9 but only some kind of a buggy one with missing encryption on Android 8.1 (I mean I'm thankful for what we have, but it's still sad), I was NOT able to flash Gapps afterwards, which means, either you have to get a Rom with implemented Gapps or live without them.
If anyone finds out a way to install them, please let me know!
REQUIREMENTS:
- Unlocked bootloader
- Any Android Oreo firmware installed
- Stock Recovery (as our TWRP can't wipe stuff)
INSTALLATION:
1. Look for your favorite Rom on the following link and download it:
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
2. Reboot your device to bootloader
3. "fastboot flash system [downloaded img file]"
4. Reboot to stock recovery
5. Wipe cache and factory reset
6. Reboot and enjoy!
I hope I was able to get some of your hopes up for Honor 9 and custom roms!

Thank u! But i have one question about this Treble Rom's... is all working? ( BT, WLAN, Sound ect.?)

nscounter said:
Thank u! But i have one question about this Treble Rom's... is all working? ( BT, WLAN, Sound ect.?)
Click to expand...
Click to collapse
Look at the bug list of each rom. As I said, I'm not the developer of any of those roms.
But I'm using the pure AOSP rom by phhusson and it's working perfectly fine without any issues as far as I can tell.

Is it compulsory to wipe data for a new ROM to work, say for example i'm going form AOSP 8 to AOSP 8.1, should the data partition be compatible and not require wiping?
Iv'e always wiped /data in the past, but i cant be bothered this time since i don't want to re-install everything.

ambitiousButRubbish said:
Is it compulsory to wipe data for a new ROM to work, say for example i'm going form AOSP 8 to AOSP 8.1, should the data partition be compatible and not require wiping?
Iv'e always wiped /data in the past, but i cant be bothered this time since i don't want to re-install everything.
Click to expand...
Click to collapse
I dirty flashed a few times - even going from AOSP to RROS for example and it went fine for me. So just try it out, reboot with only wiping cache and if you experience bugs you can still do a factory reset. But just keep in mind that many developers don't support dirty flashing because bugs can happen easily when doing that and it's also not recommended.
PS: Don't dirty flash a Rom without Gapps if you're using a launcher that requires Google Play Services!

_lucx_ said:
I dirty flashed a few times - even going from AOSP to RROS for example and it went fine for me. So just try it out, reboot with only wiping cache and if you experience bugs you can still do a factory reset. But just keep in mind that many developers don't support dirty flashing because bugs can happen easily when doing that and it's also not recommended.
PS: Don't dirty flash a Rom without Gapps if you're using a launcher that requires Google Play Services!
Click to expand...
Click to collapse
Excellent, thanks, I'll give it a try, I'll make sure I disable or uninstall xposed and disable substratum beforehand, I guess the worst that can happen is a bootloop, and I can just reflash old system image if it doesn't work .

How does ADB work for you on the AOSP treble rom?

Really_Rekt said:
How does ADB work for you on the AOSP treble rom?
Click to expand...
Click to collapse
Just tested it... I don't seem to be able to get it to work. :/ I don't know what the issue is either...

Hi,
currently i have installed RRR from OpenKirin (https://forum.xda-developers.com/honor-9/development/rom-t3754856) with magisk. But i think this ROM isn't updated anymore.
My question is: Can i install Treble Roms directly over OpenKirins ROM?
---------- Post added at 09:37 ---------- Previous post was at 09:31 ----------
Really_Rekt said:
How does ADB work for you on the AOSP treble rom?
Click to expand...
Click to collapse
Hi,
there are problems with magisk and adp: https://forum.xda-developers.com/showpost.php?p=76777735&postcount=282.

Saftpresse99 said:
Hi,
currently i have installed RRR from OpenKirin (https://forum.xda-developers.com/honor-9/development/rom-t3754856) with magisk. But i think this ROM isn't updated anymore.
My question is: Can i install Treble Roms directly over OpenKirins ROM?
---------- Post added at 09:37 ---------- Previous post was at 09:31 ----------
Hi,
there are problems with magisk and adp: https://forum.xda-developers.com/showpost.php?p=76777735&postcount=282.
Click to expand...
Click to collapse
Yes, you can flash it on top of any Project Treble (Oreo) Rom or EMUI 8 (Oreo) using my guide.
Magisk is kind of working for me although it crashes quite often and I have to reinstall the Manager or reflash it entirely fron time to time.

_lucx_ said:
Yes, you can flash it on top of any Project Treble (Oreo) Rom or EMUI 8 (Oreo) using my guide.
Magisk is kind of working for me although it crashes quite often and I have to reinstall the Manager or reflash it entirely fron time to time.
Click to expand...
Click to collapse
Thank you.
I read about problems with magisk and phhusson's gsi roms. I think to uninstall magisk before installing. I flashed magisk with fastboot, because i'm on stock recovery. So i have to read howto unroot with fastboot before i update.

_lucx_ said:
Just tested it... I don't seem to be able to get it to work. :/ I don't know what the issue is either...
Click to expand...
Click to collapse
The issue is talked about on PHH threads, it's caused by Magisk.

_lucx_ said:
Look at the bug list of each rom. As I said, I'm not the developer of any of those roms.
But I'm using the pure AOSP rom by phhusson and it's working perfectly fine without any issues as far as I can tell.
Click to expand...
Click to collapse
May I ask you how battery lie is, on AOSP?

enban said:
May I ask you how battery lie is, on AOSP?
Click to expand...
Click to collapse
Battery life was pretty good during my use without Xposed. I can't give you a specific battery life time now since I've installed Xposed which obviously made it a bit worse.

_lucx_ said:
Look at the bug list of each rom. As I said, I'm not the developer of any of those roms.
But I'm using the pure AOSP rom by phhusson and it's working perfectly fine without any issues as far as I can tell.
Click to expand...
Click to collapse
Hi,
I've several question for you :
1/ I wonder about security and privacy, do you think using aosp treble is better, than stock rom for that ?
2/ i don't care about gapps (gmail...), but i need the framework and google playstore.
If i take pure aosp without gapps does it have playstore and google frameworks ?
3/ which version do you use ? can you link me the version ?
Thanks.

Aqwel said:
Hi,
I've several question for you :
1/ I wonder about security and privacy, do you think using aosp treble is better, than stock rom for that ?
2/ i don't care about gapps (gmail...), but i need the framework and google playstore.
If i take pure aosp without gapps does it have playstore and google frameworks ?
3/ which version do you use ? can you link me the version ?
Thanks.
Click to expand...
Click to collapse
1. Well you kind of get a security risk anyway by unlocking the bootloader, rooting, etc. Other than that the Roms themselves are just what Android provides in terms of security.
2. No
3. for A-Only arm64 with Gapps and SU (https://forum.xda-developers.com/pr...development/experimental-phh-treble-t3709659)

_lucx_ said:
1. Well you kind of get a security risk anyway by unlocking the bootloader, rooting, etc. Other than that the Roms themselves are just what Android provides in terms of security.
2. No
3. for A-Only arm64 with Gapps and SU (https://forum.xda-developers.com/pr...development/experimental-phh-treble-t3709659)
Click to expand...
Click to collapse
Few questions for you buddy:
Does the camera work well?
Is fingerprint working well?
Do navkeys work?
I'm talking about aosp phh Treble.
And one thing, how to return to stock?
Extract system.img from stock rom with Huawei firmware extractor, flash it from fastboot like the aosp image, go to recovery and wipe cache and data, reboot and voila?

Double Chin Bigot said:
And one thing, how to return to stock?
Extract system.img from stock rom with Huawei firmware extractor, flash it from fastboot like the aosp image, go to recovery and wipe cache and data, reboot and voila?
Click to expand...
Click to collapse
Yes but you may use the os you had before flashing to treble, refer to https://forum.xda-developers.com/honor-9/help/help-to-stock-treble-custom-rom-t3804064
By the way thanks @_lucx_ for you answers

Double Chin Bigot said:
Few questions for you buddy:
Does the camera work well?
Is fingerprint working well?
Do navkeys work?
I'm talking about aosp phh Treble.
And one thing, how to return to stock?
Extract system.img from stock rom with Huawei firmware extractor, flash it from fastboot like the aosp image, go to recovery and wipe cache and data, reboot and voila?
Click to expand...
Click to collapse
- Yes 4K video is working (screen recording as well)
- Fingerprint is fully working with home button gestures set to Huawei's default for one button navigation - can be tweaked by editing the fingerprint.kl tho.
- Navbar is working fine for me but might have to do with the EMUI firmware you were on previously (although there's a fix for it now but I don't know if this fix works on Android 8.1)

_lucx_ said:
- Yes 4K video is working (screen recording as well)
- Fingerprint is fully working with home button gestures set to Huawei's default for one button navigation - can be tweaked by editing the fingerprint.kl tho.
- Navbar is working fine for me but might have to do with the EMUI firmware you were on previously (although there's a fix for it now but I don't know if this fix works on Android 8.1)
Click to expand...
Click to collapse
I think there's a misunderstanding. I was talking about the physical navigation keys (the ones near the fp sensor). Do they work as intended? Is it possible to deactivate the on screen navigation keys without root(because I want only the aosp Rom without anything else added)?

Noob guide to install GSI on whyred

Today I flashed Pixel Experience GSI on my whyred after much trouble so here is a guide to make things clear.
if you are coming from MIUI you have to format data from twrp. this is a must to disable encryption.
after you are done formatting data. just do factory reset from twrp and then go to advanced wipe and then do the regular dalvik, cache, system, data and then swipe to wipe.
now the thing is whyred officially supports treble but the implementation is shoddy according to XDA folks. so if you flash GSI over miui's vendor there will be many bugs. like brightness slider not working and many things. so they(all credit goes to them) created a vendor zip which makes things really good. there are no bugs and it also supports volte. here is the download link .
https://www.androidfilehost.com/?w=files&flid=273660
now flash this zip file in twrp.
after that download the GSI of your choice from here.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
remember to download arm64 A only system image.
here is pixel experience GSI which I prefer:
https://download.pixelexperience.org/treble_gsi/
now extract the zip and you will get a single .IMG file which is your system image. now go to twrp and then go to install then go to select install image downward. (don't flash directly, it's an .IMG file) then select the extracted .IMG file and then choose system and then flash.
then reboot system. that's it. you should boot fine.
download latest official twrp from here: https://dl.twrp.me/whyred
if you want root you will have to flash magisk beta 16.6 which works better on GSI. download here.
https://github.com/topjohnwu/Magisk/releases/download/v16.6/Magisk-v16.6.zip
to use Google camera you will have to enable camera2api. arnova's gcam doesn't work on this build. you will have to use BSG's gcam. here is the link. enable nexus style and active portrait mode from settings.
https://www.celsoazevedo.com/files/android/google-camera/f/MGC_5.2.022.apk
few tips: if your device is not booting and going to fastboot, flash magisk. it will definitely boot up.
if your device shows decryption failed, just format data from twrp. it will delete all user data btw.
no need to flash lazyflasher.
there are no uncertified device pop up from Google. so no need to worry.
playstore shows uncertified btw and magisk shows CTS false.
all the links that I have linked here, the credit goes to the creators. I am a normal user of XDA. thanks to them.
happy flashing and all hail the XDA lords.

How is Pixel experience gsi though?....faced any bugs till now?

it's good but there where few bugs. anyway pixel experience rom specifically for whyred has been released. you can flash that. it's great and bug free. download it here. it's not GSI though. normal ROM.
https://download.pixelexperience.org/whyred/
mr._.nobody said:
How is Pixel experience gsi though?....faced any bugs till now?
Click to expand...
Click to collapse

mr._.nobody said:
How is Pixel experience gsi though?....faced any bugs till now?
Click to expand...
Click to collapse
I was on the June build, I had issues with bluetooth audio (didn't work) and USB connection to computer (did not work). I think the USB issue was due to Magisk but I never did figure out the bluetooth issue.
No issues with the whyred version of Pixel Experience.

I also faced the same issue. But I see July build of GSI is up so those bugs might be fixed. anyway the PE ROM for whyred is excellent.
btw GSI will help us when P will release next month.
goofball2k said:
I was on the June build, I had issues with bluetooth audio (didn't work) and USB connection to computer (did not work). I think the USB issue was due to Magisk but I never did figure out the bluetooth issue.
No issues with the whyred version of Pixel Experience.
Click to expand...
Click to collapse

mearjunsha said:
I also faced the same issue. But I see July build of GSI is up so those bugs might be fixed. anyway the PE ROM for whyred is excellent.
btw GSI will help us when P will release next month.
Click to expand...
Click to collapse
So should I flash the ROM or the gsi?....are there any differences?

you should flash the ROM as it's specifically for whyred. its flashing instruction is different than GSI. but easy. just wipe and then flash the ROM. and reboot. that's it.
you may have to format data to disable encryption.
here is the forum discussion: https://forum.xda-developers.com/redmi-note-5-pro/development/rom-pixel-experience-t3816099
mr._.nobody said:
So should I flash the ROM or the gsi?....are there any differences?
Click to expand...
Click to collapse

Thanks mate for your experience, no detailed information in PE thread about wipes to do, before or after, can help with it? May be also with magisk release to install and best gcam to use?

remove all security like fingerprint, pattern etc.
go to twrp
go to wipe
do factory reset
go to advanced wipe
select dalvik, cache, system and data and then wipe
go to install
flash the pixel experience rom
reboot to system
that's it
if you get a prompt to enter password to start android then you will have to go back to twrp and go to wipe and format data and type yes. it will delete all your files btw. so backup everything. then reboot it will boot up fine.
after you have done booting and set up, go back to twrp and flash magisk v16. reboot to system. all done.
I have already given details of gcam in my OP. Kindly check that. The same works great on this ROM.
ask me if you face any problem. happy to help ?
trazalca said:
Thanks mate for your experience, no detailed information in PE thread about wipes to do, before or after, can help with it? May be also with magisk release to install and best gcam to use?
Click to expand...
Click to collapse

You are the man!!! 10 hours remaining for unlock bootloader, i'm ready and now, with your help, more confident... Thanks a lot!!

I understand your excitement but do check your build whether you are on Anti rollback. if you are on 9.5.19 you should absolutely not proceed right now.
read about it on XDA.
trazalca said:
You are the man!!! 10 hours remaining for unlock bootloader, i'm ready and now, with your help, more confident... Thanks a lot!!
Click to expand...
Click to collapse

I'm on global 9.5.6... never used phone and upgraded, i think that i can do it, i'm wrong?

you can go ahead. happy flashing! ?
trazalca said:
I'm on global 9.5.6... never used phone and upgraded, i think that i can do it, i'm wrong?
Click to expand...
Click to collapse

[dupe sorry]

You should by all means read about antirollback to be sure, but my understanding is that the antirollback refers to the firmware, not the rom. MIUI roms all include different firmware, so you can't rollback a MIUI rom (unless it's been modded to be firmwareless). But as far as I know, no custom roms include firmware, so you should be fine even if your firmware is ARB triggered if all you're doing is installing custom roms.

Hi, someone flashed latest Pie Phh GSI? I tried with PE CAF, AOSIP, and Mokee vendors but doesn't boot, always stuck at the Mi logo, even I flashed the permissiver patch without luck.

Is GSI better than respective Rom (say Havoc GSI as compared to Havoc OS rom)?

ShadowFax said:
Is GSI better than respective Rom (say Havoc GSI as compared to Havoc OS rom)?
Click to expand...
Click to collapse
Nope.

[ROM][10-Q][OFFICIAL] LineageOS 17.1 for the LG V20 variants

Lineage dev has now opened their sources for official nightly builds of LineageOS 17.1 for the V20
@x86cpu and npjohnson are the lead maintainers for the device
You can now download the nightly build and Lineage recovery at
https://download.lineageos.org
NOTE: Tap the hamburger menu button on the left to see the device sources, scroll through LG and look for your variant
Long Live LG V20!!

please Help us for install it. and h990 users test it and report whatsapp video playing.

sajadzarepour said:
please Help us for install it. and h990 users test it and report whatsapp video playing.
Click to expand...
Click to collapse
Install it just like any other Custom ROM on TWRP

Downloading it now.. and notice there 2 files.. one is the rom and the other is the recovery... can i just install the rom using twrp or i also need to install the recovery too ? is the recovery gonna overwrite the twrp ?

dgozalie said:
Downloading it now.. and notice there 2 files.. one is the rom and the other is the recovery... can i just install the rom using twrp or i also need to install the recovery too ? is the recovery gonna overwrite the twrp ?
Click to expand...
Click to collapse
It's Lineage's own recovery, haven't tried it to be honest, and it's new, but you can use TWRP also

will this rom still have quad DAC option menu in the setting? cause i am mainly using this phone as DAP....

hello
okay i already flashing the img using twrp... reboot and the lineage logo playing... keeps going for couple minutes and then reboot again and going back to twrp menu.. restart again and lineage logo playing and in the end reboot into twrp... guess cannot using twrp flash....
the things is.. i got no idea how to use lineage recovery... i google it and still very little know guide about lineage recovery...

sajadzarepour said:
please Help us for install it. and h990 users test it and report whatsapp video playing.
Click to expand...
Click to collapse
Just because you report it on official does not mean it will be fixed any quicker. See my post in my builds for what I need for people to test if it will be fixed or not. I do not have Whatsapp so unable to test.

I install last version of this rom in h990 ds and when i left the phone in charghe phone freezing and problem is solved after reboot phone i think this is kernel problem

Easy Method to Go From Unofficial Lineage 17.1 to Official Lineage 17.1
Backup data partition using TWRP
Factory reset phone using TWRP (option is under the Wipe menu)
Install Official Lineage 17.1 rom
Install Magisk 20.4 if you wish
reboot and wait for about 10 minutes until Welcome screen shows on your phone
Power down the phone, and go back into TWRP using the manual method
Once in TWRP, restore the data partition you had just backed up
reboot and wait for another 10 minutes
That's it.

ali-nsr said:
I install last version of this rom in h990 ds and when i left the phone in charghe phone freezing and problem is solved after reboot phone i think this is kernel problem
Click to expand...
Click to collapse
Please report WhatsApp video playing and about Rom

so no need to use the lineage recovery ? just use twrp fine ? what version of twrp u using ?

scottyrick said:
Easy Method to Go From Unofficial Lineage 17.1 to Official Lineage 17.1
Backup data partition using TWRP
Factory reset phone using TWRP (option is under the Wipe menu)
Install Official Lineage 17.1 rom
Install Magisk 20.4 if you wish
reboot and wait for about 10 minutes until Welcome screen shows on your phone
Power down the phone, and go back into TWRP using the manual method
Once in TWRP, restore the data partition you had just backed up
reboot and wait for another 10 minutes
That's it.
Click to expand...
Click to collapse
I'm in Oreo stock Rom
If i want install los17.1 official version i must flash Nougat version then Rooting it and after that install 15.1 and 16 before install 17.1 Or not?

dgozalie said:
Downloading it now.. and notice there 2 files.. one is the rom and the other is the recovery... can i just install the rom using twrp or i also need to install the recovery too ? is the recovery gonna overwrite the twrp ?
Click to expand...
Click to collapse
Keep TWRP. If you try for any reason to enter lineage recovery with our button combo, it'll format your data, just letting you know.

sajadzarepour said:
I'm in Oreo stock Rom
If i want install los17.1 official version i must flash Nougat version then Rooting it and after that install 15.1 and 16 before install 17.1 Or not?
Click to expand...
Click to collapse
I agree with the process you described.. Make certain you are fully working on Unofficial 17.1 before moving to Official version.

Hello all. Brand new to XDA, created an account to join the discussion here.
Dirty flashed this over unofficial 16.0 successfully. Using Nano Gapps, no kernel or anything crazy. I'm absolutely loving it and flying along.
One issue I'm having right now is a lack of audio over bluetooth in calls, or microphone. I can't make or recieve calls over bluetooth with either my WI-1000x neckband, or my car. Calls themselves work fine (Does this have VoLTE or WiFi calling support?) but my bluetooth calling doesn't work at all.
I can listen to music fine, but when using discord or calling, no dice. I'm new, so I don't know what kind of information I need to provide to get some help - but I have tried wiping my cache/dalvik, unpairing and repairing, and turning bluetooth on and off. Nothing has worked as of yet. I can take a bug report or get a log or something if you need, don't know how.
Anyone else experiencing this issue, or are your calls over bluetooth working? What do I need to do to submit a bug report, or is it something I'm missing and an easy fix?
Thanks all!

Hello
I am successfully flash it..now how to enable the quad DAC in this rom?

Do I need to swap recoveries from twrp to lineage one to try this Lineage OS version? Do I need to use the to-x86 zip like the others require?
One last question, can I easily swap between this and Stock 7.0 if I want for ls997? No ARB issues I hope
---------- Post added at 11:25 PM ---------- Previous post was at 11:22 PM ----------
dgozalie said:
Hello
I am successfully flash it..now how to enable the quad DAC in this rom?
Click to expand...
Click to collapse
U could possibly try to add dac with an app called Lg V10 DAC FIX from playstore. I haven't tried yet myself tho, I just read something before about it.

vectorvitale said:
Hello all. Brand new to XDA, created an account to join the discussion here.
Dirty flashed this over unofficial 16.0 successfully. Using Nano Gapps, no kernel or anything crazy. I'm absolutely loving it and flying along.
One issue I'm having right now is a lack of audio over bluetooth in calls, or microphone. I can't make or recieve calls over bluetooth with either my WI-1000x neckband, or my car. Calls themselves work fine (Does this have VoLTE or WiFi calling support?) but my bluetooth calling doesn't work at all.
I can listen to music fine, but when using discord or calling, no dice. I'm new, so I don't know what kind of information I need to provide to get some help - but I have tried wiping my cache/dalvik, unpairing and repairing, and turning bluetooth on and off. Nothing has worked as of yet. I can take a bug report or get a log or something if you need, don't know how.
Anyone else experiencing this issue, or are your calls over bluetooth working? What do I need to do to submit a bug report, or is it something I'm missing and an easy fix?
Thanks all!
Click to expand...
Click to collapse
First of all. It's an official build and therefore you shouldn't dirty flash. U need to factory reset and clear cache and dalvik. Do not format your internal storage. It isn't necessary

Hello...
awesome rom.. like it so much... so here is thing that doesn't work in here
1. fingerprint sensor
2. QUAD DAC
hope the fix will be out soon..

Most current TWRP/Magisk for Unlocked OnePlus 7 Pro OOS 10.3.1.GM21AA (GM1917)

Hey, guys. So I've been messing with my phone all day after a soft brick after having BlissROM since Feb. Long story short, something with the ROM update and it messed with my phone. I wiped EVERYTHING thinking it would solve the problem. I was able to use the All-In-One tool to save my phone through the bootloader (Thank goodness!). I finally got it to boot up to stock this morning. I've been trying all morning to gain root, but once I do, I lose WiFi and Network connections. So my question is:
What is the most current version of TWRP and Magisk that will allow me to be on stock and have root without any problems?
This is my setup.
OnePlus 7 Pro
Android version: Android 10
Build: Oxygen OS 10.0.3.GM21AA (now updated to 10.3.1)
Model: GM1917
Unlocked OEM
Unlocked Bootloader
This is the method I am using to push TWRP though the bootloader.
https://androidmtk.com/download-minimal-adb-and-fastboot-tool
These are the files that flash through adb/fastboot and lose Wifi and Network connectivity.
TWRP 3.3.1-79-guacamole-unified-Q: https://sourceforge.net/projects/ma...-guacamole-unified-Q-mauronofrio.img/download
Magisk v20.4: https://github.com/topjohnwu/Magisk/releases/download/v20.4/Magisk-v20.4.zip
Since I don't have any connectivity at this point, I attempt to flash BlissROM with the following steps.
BlissROM version that last worked for me: https://downloads.blissroms.com/BlissRoms/Q/guacamole/Bliss-v12.6-guacamole-OFFICIAL-20200425.zip
STEPS
Boot into recovery
Backup your current ROM
Perform a factory reset
Flash Bliss Rom
Reboot recovery
Flash OpenGapps--NANO PACKAGE!!
*Flash magisk* optional
Reboot to system
Also, as I've previously stated, I have attempted to flash BlissROM through TWRP and with root (without WiFi and Data), but it hangs on the boot screen. When I go to TWRP and try to reflash the ROM, it gives me the error "cannot mount storage". I follow the instructions as stated in the original post, so I figured it has to be something with the TWRP or Magisk versions not being compatible. Since that does not work, I have since flashed stock and am currently on that without problems. Any links to the most current TWRP/Magisk/rooting methods are greatly appreciated. And if someone could help with getting BlissROM back on my phone afterwards, that would be great. Thanks!

Pretty sure you need to update to 10.3.2 to get it working right.
Sent from my GM1915 using Tapatalk

mjdavis871 said:
Pretty sure you need to update to 10.3.2 to get it working right.
Sent from my GM1915 using Tapatalk
Click to expand...
Click to collapse
I just realized I could update past the first update. I figured it would update to the most recent version version after the flash back to stock, not that it would be incremental. Thank you so much for the heads up!
I have the most recent version of Magisk downloaded. What is the best for 10.3.2?

knightsriot said:
I just realized I could update past the first update. I figured it would update to the most recent version version after the flash back to stock, not that it would be incremental. Thank you so much for the heads up!
I have the most recent version of Magisk downloaded. What is the best for 10.3.2?
Click to expand...
Click to collapse
That I could not say for sure, but my guess is that it would work fine.
Sent from my GM1915 using Tapatalk

mjdavis871 said:
That I could not say for sure, but my guess is that it would work fine.
Sent from my GM1915 using Tapatalk
Click to expand...
Click to collapse
Got it. Does the same goes for TWRP? I read somewhere that the unofficial one might work better with Android Q (I'm assuming that's Android 10?)

I always use the unofficial version, works fine for me.
Sent from my GM1915 using Tapatalk

mjdavis871 said:
I always use the unofficial version, works fine for me.
Sent from my GM1915 using Tapatalk
Click to expand...
Click to collapse
Got it. Okay, so it looks like I'll be giving BlissROM one last shot!
Before I flash TWRP and Magisk, I looked on the Oneplus website for the 10.3.2 update and it looks like the most current posted is 10.3.1. Should I update to 10.3.2 for the latest ROMS, or will 10.3.1 work fine? If so, where can I find it?

I used the oxygen updater app to download the update and sideloaded it.
Sent from my GM1915 using Tapatalk

mjdavis871 said:
I used the oxygen updater app to download the update and sideloaded it.
Sent from my GM1915 using Tapatalk
Click to expand...
Click to collapse
So it looks like that didn't work. I got stuck on a bootloop again and had to revert back to stock.
I can't seem to find what the problem is. Here is what I am flashing:
TWRP 3.3.1-79-guacamole-unified-Q: https://sourceforge.net/projects/mau...o.img/download
Magisk v20.4: https://github.com/topjohnwu/Magisk/...gisk-v20.4.zip
This is the method I am using flash TWRP to the bootloader.
https://androidmtk.com/download-minimal-adb-and-fastboot-tool
When I flash both of those, I lose Wifi and Network on my stock ROM. I'm assuming one of them is also the reason why I can't flash BlissROM.

You don't need to flash magisk before you flash the ROM, just twrp. I do know when I bootlooped, it was because I missed a step, usually because I didnt wipe data.
Follow the flash instructions step by step or you will for sure bootloop. Read them over and over until you think you have a grasp of how to flash the ROM.
You can always get back into fastboot by holding power and both volume keys...then you can reflash twrp and start over. No need to go back to stock unless you want to or need to.
Just make sure you follow the instructions step by step. This device is a bit different to flash from the devices I have used before ...so it took me a few tries to get it done right.
Sent from my GM1915 using Tapatalk

mjdavis871 said:
You don't need to flash magisk before you flash the ROM, just twrp. I do know when I bootlooped, it was because I missed a step, usually because I didnt wipe data.
Follow the flash instructions step by step or you will for sure bootloop. Read them over and over until you think you have a grasp of how to flash the ROM.
You can always get back into fastboot by holding power and both volume keys...then you can reflash twrp and start over. No need to go back to stock unless you want to or need to.
Just make sure you follow the instructions step by step. This device is a bit different to flash from the devices I have used before ...so it took me a few tries to get it done right.
Sent from my GM1915 using Tapatalk
Click to expand...
Click to collapse
I've been following the steps exactly as written. Take a look at step 5 on the TWRP thread. (https://forum.xda-developers.com/on...covery-unofficial-twrp-recovery-t3931322/amp/)
Install guide (Reccomended):
1. Install fastboot tools from google's sdk on your PC
2. Enter fastboot mode
3. Unlock your bootloader
4. Run "fastboot boot recoveryimgfilename.img" in command line (if you want to have it permanently you should flash the installer)
5. If you will flash the installer and you are stock you need also to flash magisk or your phone will not boot again
6. Enjoy it
Click to expand...
Click to collapse
Furthermore, this is also reiterated in the BlissROM thread. https://forum.xda-developers.com/oneplus-7-pro/development/rom-blissroms-v11-9-t3957341/page138
Make sure you are rooted
Make sure you have a custom recovery installed
For Q-BETA- Make sure you are on Q firmware, is currently set to use OOS 10.3.0 Stable firmware- CLEAN INSTALL!!
Click to expand...
Click to collapse
I also noted that in that previous quote, having the original 10.0.3 I had installed shouldn't have cause any problems. I wiped data (factory reset) every time I flashed BlissROM, as it is the third step in the process.
The reason why I go back to stock using the all-in-one tool is because I don't have anything else to flash. The whole reason I even had a soft brick was because I tried to go back to stock after my BlissROM update and flashed a OTA from the oneplus site. I probably did that incorrectly, however. Idk how what sideload is or how it functions. So that all-in-one tool is my only safety net.