Related
I am getting my Sony "U.S" Version just because of its warranty, is there a way i can Enable the fingerprint. Please help
currently all you could do is flash the International firmware. I haven't really looked into anything though personally. I'm not sure how they disabled it, maybe changing a 0 to 1 somewhere but I doubt it.
Yes I got the US version from Amazon and just flashed the CE1 firmware and fingerprint works after flashing that firmware
Sent from my G8142 using Tapatalk
Buy it from the UK. Same warranty. No need to flash anything. Save about $100.00
NO BRAINER!
jaseman said:
Buy it from the UK. Same warranty. No need to flash anything. Save about $100.00
NO BRAINER!
Click to expand...
Click to collapse
It doesn't have US warranty, probably you have to send it back to UK. Personally I don't care about warranties, never had to use for any of my many phones until now partly because don't keep the phone that long. The other advantage buying from Amazon US is ease of return in case you don't like the phone. If you played with it before and 100% sure you like the phone and will definitely keeping it, then yeah better to buy from clove and save the extra $150 or change.
kirdroid said:
Yes I got the US version from Amazon and just flashed the CE1 firmware and fingerprint works after flashing that firmware
Sent from my G8142 using Tapatalk
Click to expand...
Click to collapse
Can you post a simple guide to do this with some links on where to get all the tools firmware, flashy oil etc... Also I think there are some alternatives for the firmware such as the US and European version any differences between them?
samurayx89 said:
Can you post a simple guide to do this with some links on where to get all the tools firmware, flashy oil etc... Also I think there are some alternatives for the firmware such as the US and European version any differences between them?
Click to expand...
Click to collapse
I used the newflasher tool in the below link. Personally this is my first Xperia device in a long time and haven't used the Xperia flashing tools before.
https://forum.xda-developers.com/showthread.php?t=3619426
1. Make sure you have the right drivers installed. I installed Xperia companion tool since someone mentioned that should install all the drivers. I also installed the flash tool and fastboot drivers from Xperia flash tool since I had issues putting my phone in flash mode. If you are using Windows 10 you have disable verify driver signing in boot before installing the flash tool drivers.
2. Download the firmware of your choice, I chose CE1 (Central Europe) firmware over other Asian firmware.
3. Then follow the instructions in the thread to flash.
Main issue I had was putting my phone in flash mode. But apparently flash mode doesn't have any screen like recovery etc. You just have to turn off your phone then while holding the volume button down connect your phone via USB. That should put in flash mode even though you don't get any screen to say it's in flash mode.
Once I put in flash mode everything went fine by following instructions in the thread.
Thanks,
So when you downloaded the files with XperiFirm and used NewFlasher did you delete any of the files or just drop newflasher into the created directory and flashed everything.
samurayx89 said:
Thanks,
So when you downloaded the files with XperiFirm and used NewFlasher did you delete any of the files or just drop newflasher into the created directory and flashed everything.
Click to expand...
Click to collapse
Just dropped all newflasher files into the created firmware directory and just ran the newflasher application from that directory. It flashed everything in there.
I know the thread says if you want you can remove specific things from the firmware directory if you don't want to flash certain things. But I didn't see any reason to do that and I never care about wiping my device since all my info is backed up in the cloud and takes around 30 minutes to restore and be up and running again. Just to be safe I flashed everything so that it doesn't screw up anything. I haven't used the Xperia flash tools before so kept it simple.
kirdroid said:
Just dropped all newflasher files into the created firmware directory and just ran the newflasher application from that directory. It flashed everything in there.
I know the thread says if you want you can remove specific things from the firmware directory if you don't want to flash certain things. But I didn't see any reason to do that and I never care about wiping my device since all my info is backed up in the cloud and takes around 30 minutes to restore and be up and running again. Just to be safe I flashed everything so that it doesn't screw up anything. I haven't used the Xperia flash tools before so kept it simple.
Click to expand...
Click to collapse
Does Google Assistant work for you on the CE1 firmware? It's not popping up for me at all.
Yadiel2007 said:
Does Google Assistant work for you on the CE1 firmware? It's not popping up for me at all.
Click to expand...
Click to collapse
Yeah working fine no issues here (long press home button to bring up assistant) ... Even ok Google works fine as well when screen is on.
kirdroid said:
Just dropped all newflasher files into the created firmware directory and just ran the newflasher application from that directory. It flashed everything in there.
I know the thread says if you want you can remove specific things from the firmware directory if you don't want to flash certain things. But I didn't see any reason to do that and I never care about wiping my device since all my info is backed up in the cloud and takes around 30 minutes to restore and be up and running again. Just to be safe I flashed everything so that it doesn't screw up anything. I haven't used the Xperia flash tools before so kept it simple.
Click to expand...
Click to collapse
Do you still have Volte working after flashing the CE firmware?
tdgillihan said:
Do you still have Volte working after flashing the CE firmware?
Click to expand...
Click to collapse
Also curious about volte, I bought mine from Best Buy yesterday and it doesn't have Volte on T-Mobile in the us. I'm hoping flashing the CE firmware enables it.
HigherSensation said:
Also curious about volte, I bought mine from Best Buy yesterday and it doesn't have Volte on T-Mobile in the us. I'm hoping flashing the CE firmware enables it.
Click to expand...
Click to collapse
Hmmm, that's weird. My understanding was that it was enabled on the US version but not on the international. Are you sure you don't have it?
tdgillihan said:
Hmmm, that's weird. My understanding was that it was enabled on the US version but not on the international. Are you sure you don't have it?
Click to expand...
Click to collapse
I'm pretty sure it's the US model because the fingerprint sensor is disable.
there is no VOLTE on this phone, no menu options for advanced calling like wifi calling either.
tdgillihan said:
Hmmm, that's weird. My understanding was that it was enabled on the US version but not on the international. Are you sure you don't have it?
Click to expand...
Click to collapse
HigherSensation said:
I'm pretty sure it's the US model because the fingerprint sensor is disable.
Click to expand...
Click to collapse
afuller42 said:
there is no VOLTE on this phone, no menu options for advanced calling like wifi calling either.
Click to expand...
Click to collapse
Sorry, my bad, mixed up my forums. Comments deleted.
afuller42 said:
there is no VOLTE on this phone, no menu options for advanced calling like wifi calling either.
Click to expand...
Click to collapse
Must be an Branding/Software issue i guess.
On the unbranded EU version, both is available.
wifi calling: Settings -> Wireless&Networks -> Wi-Fi Calling
VoLTE: Settings -> Wireless&Networks -> Mobile Networks -> Enable VoLTE
Tuerkay said:
Must be an Branding/Software issue i guess.
On the unbranded EU version, both is available.
wifi calling: Settings -> Wireless&Networks -> Wi-Fi Calling
VoLTE: Settings -> Wireless&Networks -> Mobile Networks -> Enable VoLTE
Click to expand...
Click to collapse
Are you sure it has nothing to do with your service provider?
I bought mine from the UK (not sure if it is the same as the unbranded EU version you mention) and when I look for those same settings they do not exist.
I am in the US running on AT&T as an unlocked go phone customer.
afuller42 said:
there is no VOLTE on this phone, no menu options for advanced calling like wifi calling either.
Click to expand...
Click to collapse
jaseman said:
Are you sure it has nothing to do with your service provider?
I bought mine from the UK (not sure if it is the same as the unbranded EU version you mention) and when I look for those same settings they do not exist.
I am in the US running on AT&T as an unlocked go phone customer.
Click to expand...
Click to collapse
Could be that the settings are not available unless your carrier/plan supports them. Pretty sure anyone slipping a T Mobile sim in has those services.
Hi there,
Cutting to the chase.
Australian, use Vodafone AU when at home, but working in the Philippines a lot this year (Smart Philippines), plus travel often to Taiwan.
Need VoLTE for VF AU, would love it for Taiwan (TW Mobile), dont think Smart offers it at all in PH YET, but if and when, would also be great, but less critical.
Currently have a Pixel 3 XL from VF AU, so thats sorted.
Wondering, if I get a Oneplus 7 P, what is likely to be needed to make it work?
Previously had to run custom ROMS on previous HTCs to get non native network support for VoLTE, even then it required the ROM cooker to code it in.
Please educate me!
There was a way to force enable Volte on my OP6
I'm pretty sure the process would be the same
I'll link it when I get behind my pc
thanks, look forward to your link.
virtyx said:
There was a way to force enable Volte on my OP6
I'm pretty sure the process would be the same
I'll link it when I get behind my pc
Click to expand...
Click to collapse
nope the option isn't there any more
we cut do it on op6 bye enter *#800#
in dailer
an FYI dont touch anything in there unless u know what u are doing
Same .. was working fine on 6t... Don't get.. why is it disabled
-fluffy- said:
nope the option isn't there any more
we cut do it on op6 bye enter *#800#
in dailer
an FYI dont touch anything in there unless u know what u are doing
Click to expand...
Click to collapse
does *#801# work?
that should be enough to get it working *#800# used to enable the switch, they probably changed it.
virtyx said:
does *#801# work?
that should be enough to get it working *#800# used to enable the switch, they probably changed it.
Click to expand...
Click to collapse
no thats factory mode
virtyx said:
does *#801# work?
that should be enough to get it working *#800# used to enable the switch, they probably changed it.
Click to expand...
Click to collapse
problem is
it's not there anymore
-fluffy- said:
problem is
it's not there anymore
Click to expand...
Click to collapse
there must be a way to enable serial and full-port switch (also the VOLTE switch similar to *#800#)
im pretty sure its a qualcomm / factory mode settings, it must have moved somewhere else.
i cant image oneplus getting rid of it all together.
whats TP debug?
ive sent an email to OP hopefully they can get back with an answer.
i know my pixel3xl enters a qualcom mode when i press the volume up button and have it plugged to my PC (from power off - hold down volume up and plug into PC)
maybe its similar?
virtyx said:
there must be a way to enable serial and full-port switch (also the VOLTE switch similar to *#800#)
im pretty sure its a qualcomm / factory mode settings, it must have moved somewhere else.
i cant image oneplus getting rid of it all together.
whats TP debug?
ive sent an email to OP hopefully they can get back with an answer.
i know my pixel3xl enters a qualcom mode when i press the volume up button and have it plugged to my PC (from power off - hold down volume up and plug into PC)
maybe its similar?
Click to expand...
Click to collapse
U can enable serial and full port switch... What can we do then if that's enabled?
misiokicio said:
U can enable serial and full port switch... What can we do then if that's enabled?
Click to expand...
Click to collapse
How do you get to the switch to turn them on?
I used this on my OP6
https://forum.xda-developers.com/oneplus-5t/how-to/guide-volte-vowifi-german-carriers-t3817542
virtyx said:
How do you get to the switch to turn them on?
I used this on my OP6
https://forum.xda-developers.com/oneplus-5t/how-to/guide-volte-vowifi-german-carriers-t3817542
Click to expand...
Click to collapse
But let's say i use this guide...still says u need to enable the volte and wifi calling swiches by going into *#800# in logkit .. but unfortunately op7 pro does not have these option to enable em in the logkit ? So what's gonna happen if u do all that pc connection without using logkit?
misiokicio said:
But let's say i use this guide...still says u need to enable the volte and wifi calling swiches by going into *#800# in logkit .. but unfortunately op7 pro does not have these option to enable em in the logkit ? So what's gonna happen if u do all that pc connection without using logkit?
Click to expand...
Click to collapse
Itay just enable the switches anyway
virtyx said:
Itay just enable the switches anyway
Click to expand...
Click to collapse
So is it safe to follow that guide? Not rooted so i cant backup efs
misiokicio said:
So is it safe to follow that guide? Not rooted so i cant backup efs
Click to expand...
Click to collapse
you could wait for the MSM tool to be released
if you break something you can always use the MSM tool to repair EFS
pretty sure you can create a backup of efs using fastboot (i dont know exactly how)
I have VOLTE just popped sim card in and it showed up. Didn't have to do anything. 12gb unlocked version on ATT.
Qualcomm drivers don't seem to work with the 7. Can't find the device in PDC after enabling serial & full-port switch.
I noticed compared to the 6, that VoLTE and VoWiFi works for one of my carrier (Vodafone NL) out of the box. The trick that I did on my 6 also made VoLTE work for my other carrier (KPN NL) which doesn't work with the 7 pro out of the box.
borijess said:
I have VOLTE just popped sim card in and it showed up. Didn't have to do anything. 12gb unlocked version on ATT.
Click to expand...
Click to collapse
Out of curiosity, what was your phone before? Mine is due for delivery today, I have ATT and my phone before is a 6T. Just wondering because I want to make sure I still have VoLTE. Thanks!
xByt3z said:
Qualcomm drivers don't seem to work with the 7. Can't find the device in PDC after enabling serial & full-port switch.
I noticed compared to the 6, that VoLTE and VoWiFi works for one of my carrier (Vodafone NL) out of the box. The trick that I did on my 6 also made VoLTE work for my other carrier (KPN NL) which doesn't work with the 7 pro out of the box.
Click to expand...
Click to collapse
did you open as admin? i dont see why it wouldnt work
did you connect phone then open the PDC software?
perhaps we need an updated PDC/QPST tool?
Qualcomm drivers: https://qc2.androidfilehost.com/dl/...4074/QUD.WIN.1.1+Installer-10037.3+Setup.zip?
QPST: https://qpsttool.com/qpst-tool-v2-7-474
try these. they look like the latest versions.
perhaps try a different USB port also.
if this doesnt work, we might have to try and get in touch with the OP and see if they know of any way to get it working.
i dont have my 7Pro yet to try this.
I tried with 2 different computers and I have those exact versions you linked installed.
Yes, I opened as admin.
Yes, I connected the phone first then opened the software. I tried reconnecting with the software open too but also, no luck.
I tried searching for a driver in Device Manager manually by browsing to both the Qualcomm and OnePlus folders.
Is Reliance JIO working on Oneplus 8T?
I have unlocked Tmobile OP 8T ( KB 2007) and it's not working for me.
5ud0 said:
Is Reliance JIO working on Oneplus 8T?
I have unlocked Tmobile OP 8T ( KB 2007) and it's not working for me.
Click to expand...
Click to collapse
It is working perfectly fine, although my device model number is KB2001.
You may have to flash the Indian firmware to make it work.
TheMystic said:
It is working perfectly fine, although my device model number is KB2001.
You may have to flash the Indian firmware to make it work.
Click to expand...
Click to collapse
Unfortunately nothing is working for me
Tried all 3 versions of oxygen os. It's working in my op 6t but not in op8t
5ud0 said:
Unfortunately nothing is working for me
Tried all 3 versions of oxygen os. It's working in my op 6t but not in op8t
Click to expand...
Click to collapse
I had the same problem on a Samsung S8+ (purchased abroad).
The solution was to flash the local firmware and everything worked after that.
You are probably flashing the OS. I'm saying you have to flash the FIRMWARE (which is different from the OS).
Someone who has a custom recovery installed may be able to help you.
TheMystic said:
I had the same problem on a Samsung S8+ (purchased abroad).
The solution was to flash the local firmware and everything worked after that.
You are probably flashing the OS. I'm saying you have to flash the FIRMWARE (which is different from the OS).
Someone who has a custom recovery installed may be able to help you.
Click to expand...
Click to collapse
Cool, Thanks for letting me know. I will look it up. If you have any threads that can help me, I would really appreciate that
Update: Just a clarification mate, by flashing firmware, do you mean flashing the global rom from fastboot? If so, that is how I flashed global rom on my T-Mobile. All the articles when I search for flashing firmware is pointing to the flashing from fastboot which is what I did.
5ud0 said:
Cool, Thanks for letting me know. I will look it up. If you have any threads that can help me, I would really appreciate that
Update: Just a clarification mate, by flashing firmware, do you mean flashing the global rom from fastboot? If so, that is how I flashed global rom on my T-Mobile. All the articles when I search for flashing firmware is pointing to the flashing from fastboot which is what I did.
Click to expand...
Click to collapse
8T is a very new device, and I don't think the required files are available yet. As far as I know, even TWRP isn't available yet for this device.
Once a custom recovery is available, someone who has the KB2001 model may be able to extract the required files and pack them in a flashable zip. It is these files that are primarily what distinguishes one model number from another.
This is NOT the OS/ ROM. The Firmware contains the modem and other driver files to support the telecom bands/ spectrum (among others) used in a specific region. I'm afraid you have to wait for now, as there is unlikely to be an immediate solution now.
You can try at the service centre though. They may be able to help here (although very unlikely).
the only reason why I converted to global is for faster updates, then OnePlus released oxygenos 12 and all my reasoning was gone. How do i go back?
Do the same but with this MSM tool
I recently have problem switching to global version and had to return to tmobile and used this.
Thread 'OnePlus 9 11.2.22.2 (T-Mobile) MSM Download Tool' https://forum.xda-developers.com/t/oneplus-9-11-2-22-2-t-mobile-msm-download-tool.4276119/
Use the T-Mo MSM tool then apply any updates that T-Mo pushes down.
I tried this MSM tool to see if it would help me finally get my updates to A12, but it seems like something's borked and I wind up getting the same 506MB update that claims to be c.16 but winds up being 11.2.8.8. Just a heads up, you may not get back up to date!
Gabiru05 said:
Do the same but with this MSM tool
I recently have problem switching to global version and had to return to tmobile and used this.
Thread 'OnePlus 9 11.2.22.2 (T-Mobile) MSM Download Tool' https://forum.xda-developers.com/t/oneplus-9-11-2-22-2-t-mobile-msm-download-tool.4276119/
Click to expand...
Click to collapse
RockfordRocksAHD said:
I tried this MSM tool to see if it would help me finally get my updates to A12, but it seems like something's borked and I wind up getting the same 506MB update that claims to be c.16 but winds up being 11.2.8.8. Just a heads up, you may not get back up to date!
Click to expand...
Click to collapse
Yes after updated this patch you will get another update notification Wich is complete of 4.8 gb.
Gabiru05 said:
Yes after updated this patch you will get another update notification Wich is complete of 4.8 gb.
Click to expand...
Click to collapse
It's been like 3 days now lol. Is it just really that slow to get the next patch? My phone still says up to date.
RockfordRocksAHD said:
It's been like 3 days now lol. Is it just really that slow to get the next patch? My phone still says up to date.
Click to expand...
Click to collapse
Humm something strange because in my case when I bought my op9 tmobile it updated to android 12 also oxygen. then I wanted to switch to the global version and bricked my phone by this reason I went back to install using that msm that I told you to the tmobile version again and got all update from android 11 to latest android 12 and all normal.
You really shouldn't convert back. T-Mobile gets the slowest updates by far and there is no downside to running global or EU firmware on it.
EtherealRemnant said:
You really shouldn't convert back. T-Mobile gets the slowest updates by far and there is no downside to running global or EU firmware on it.
Click to expand...
Click to collapse
Hello Ethereal I am agree with you but probably the only reason to return to the tmobile version would be to unlock the SIM in case it has not been done or it presents a problem in the global version marking dual sim which is my case currently.
I'm also gonna trade in my phone through T-Mobile, I assume they'll still let me do it with global firmware?
EtherealRemnant said:
You really shouldn't convert back. T-Mobile gets the slowest updates by far and there is no downside to running global or EU firmware on it.
Click to expand...
Click to collapse
Do you know how can I solve problem Wich show me dual sim after switch to global room but my phone show le1125 Wich is na version. I am confuse
Gabiru05 said:
Do you know how can I solve problem Wich show me dual sim after switch to global room but my phone show le1125 Wich is na version. I am confuse
Click to expand...
Click to collapse
You can install the Magisk fix to fix that.
[TMO] OOS/COS DATA FIX
TO CLARIFY THIS IS A ROOT ONLY FIX After gaining root install given module. Data is now retained. Even after reboot(s). No empty slot or waiting. Issue is TMO variant is showing multi sim. So props were added to make it like a conversion to...
forum.xda-developers.com
I use this on my global 9 to fix the issue in India and China firmwares.
Gabiru05 said:
Humm something strange because in my case when I bought my op9 tmobile it updated to android 12 also oxygen. then I wanted to switch to the global version and bricked my phone by this reason I went back to install using that msm that I told you to the tmobile version again and got all update from android 11 to latest android 12 and all normal.
Click to expand...
Click to collapse
I actually contacted T-Mobile about it and they seem baffled, so much so they tried talking to OnePlus about it and OnePlus told them my device is supposed to have 11, which I know it's not. Something feels ****y here
EtherealRemnant said:
You can install the Magisk fix to fix that.
[TMO] OOS/COS DATA FIX
TO CLARIFY THIS IS A ROOT ONLY FIX After gaining root install given module. Data is now retained. Even after reboot(s). No empty slot or waiting. Issue is TMO variant is showing multi sim. So props were added to make it like a conversion to...
forum.xda-developers.com
I use this on my global 9 to fix the issue in India and China firmwares.
Click to expand...
Click to collapse
If I was to switch to Global FW, is there a non-root way to fix the SIM issue? I use banking apps and a few Niantic games on my phone and they don't like root
RockfordRocksAHD said:
If I was to switch to Global FW, is there a non-root way to fix the SIM issue? I use banking apps and a few Niantic games on my phone and they don't like root
Click to expand...
Click to collapse
No, there's not, but I have been successful at hiding root from every app that I have tried to hide it from so it's a moot point for me.
It seems strange that the global NA ROM is having that issue though because the global ROM isn't a dual SIM ROM. EU, IN, and CN are dual SIM but global/NA is not. I guess maybe it's because the T-Mobile variant is technically dual SIM with it just disabled?
RockfordRocksAHD said:
I actually contacted T-Mobile about it and they seem baffled, so much so they tried talking to OnePlus about it and OnePlus told them my device is supposed to have 11, which I know it's not. Something feels ****y here
Click to expand...
Click to collapse
Really strange.
RockfordRocksAHD said:
I actually contacted T-Mobile about it and they seem baffled, so much so they tried talking to OnePlus about it and OnePlus told them my device is supposed to have 11, which I know it's not. Something feels ****y here
Click to expand...
Click to collapse
I'm having the same exact issue
Did you ever get it resolved?
AaronRamlochan said:
I'm having the same exact issue
Did you ever get it resolved?
Click to expand...
Click to collapse
No, unfortunately. I used a guide on here to bypass the greyed out OEM Unlocking switch in Developer settings and requested my unlock code from OnePlus so I could root on global A12 and use the Dual Sim fix. It's really a complicated mess for a rather nice phone.
Oem unlocking token code missing,how to collect token code or without code how to unlock oem unlock ? OnePlus 9 5g le2117
[SOLVED] - Solution found here.
This worked for me on OxygenOS 13 and seems to be permanent, persisting after reboot and SIM swap.
Finally!!! GUIDE To enable VoLTE and VoWifi on OOS 12.1 without root
Hello everyone, finally there is a way to enable VoLte without root You need 2 apps for the process .. Before starting if you have 2 sims make sure you disable the second sim and proceed.. After you finish with the first sim then enable the...
forum.xda-developers.com
Hi PPLs,
Has anyone managed to force VoLTE Calling to be enabled on OOS12? I am using the OnePlus 8T and my wife uses the OnePlus 9. I have had to rollback both phone the OOS11 after testing OOS12 and realising the OnePlus Log Kit app no longer works, therefore no way to enable VoLTE calling.
For now we are holding on to OOS11 (with the Log Kit fix) until we find a fix in OOS12, otherwise we both might be forced to look and another brand of phone, which I really don't want to do.
Just as a side note, I was using a Realme XT which I bought in 2020 which had VoLTE enabled by default as soon as it recognised the SIM, so the network is capable, but I get no support from Vodafone AU as the OnePlus phones are imported as they are not generally sold in Australia. It seems the same story with all Australian carriers.
Also, my main reason for not rooting the phones is since we use them as daily drivers and need to use secure banking apps.
I know a few people have asked similar questions before, however I'm hoping there might be some progress on this soon.
Thank you!
Currently running: OnePlus 8T (KB2000) & 9 on OOS11 - Vodafone Australia
joe460 said:
Hi PPLs,
Has anyone managed to force VoLTE Calling to be enabled on OOS12? I am using the OnePlus 8T and my wife uses the OnePlus 9. I have had to rollback both phone the OOS11 after testing OOS12 and realising the OnePlus Log Kit app no longer works, therefore no way to enable VoLTE calling.
For now we are holding on to OOS11 (with the Log Kit fix) until we find a fix in OOS12, otherwise we both might be forced to look and another brand of phone, which I really don't want to do.
Just as a side note, I was using a Realme XT which I bought in 2020 which had VoLTE enabled by default as soon as it recognised the SIM, so the network is capable, but I get no support from Vodafone AU as the OnePlus phones are imported as they are not generally sold in Australia. It seems the same story with all Australian carriers.
Also, my main reason for not rooting the phones is since we use them as daily drivers and need to use secure banking apps.
I know a few people have asked similar questions before, however I'm hoping there might be some progress on this soon.
Thank you!
Currently running: OnePlus 8T (KB2000) & 9 on OOS11 - Vodafone Australia
Click to expand...
Click to collapse
Hi. No way. only Root
joe460 said:
Hi PPLs,
Has anyone managed to force VoLTE Calling to be enabled on OOS12? I am using the OnePlus 8T and my wife uses the OnePlus 9. I have had to rollback both phone the OOS11 after testing OOS12 and realising the OnePlus Log Kit app no longer works, therefore no way to enable VoLTE calling.
For now we are holding on to OOS11 (with the Log Kit fix) until we find a fix in OOS12, otherwise we both might be forced to look and another brand of phone, which I really don't want to do.
Just as a side note, I was using a Realme XT which I bought in 2020 which had VoLTE enabled by default as soon as it recognised the SIM, so the network is capable, but I get no support from Vodafone AU as the OnePlus phones are imported as they are not generally sold in Australia. It seems the same story with all Australian carriers.
Also, my main reason for not rooting the phones is since we use them as daily drivers and need to use secure banking apps.
I know a few people have asked similar questions before, however I'm hoping there might be some progress on this soon.
Thank you!
Currently running: OnePlus 8T (KB2000) & 9 on OOS11 - Vodafone Australia
Click to expand...
Click to collapse
Actually there is a way, but not straightforward and if you mess up, you can brick your phone.
First of all you need to unlock engineering menu in OOS12 and in MBN section try to enable VoLTE. If after this volte still doesn't work, enable diagnostic ports via engineering menu, and only after via QPST and PDC activate carrier profiles for your region (Vodafone Australia).
P.S: Making it via root is easier, as Volte is enabled via Magisk module, and diagnostic ports for PDC & QPST are enabled via basically two commands in adb.
Why not try LineageOS 19.1(Android 12)?
Volte works fine out of box.
You just need gapps, magisk and some module to pass safteynet check, then it's all good.
Rootk1t said:
Actually there is a way, but not straightforward and if you mess up, you can brick your phone.
First of all you need to unlock engineering menu in OOS12 and in MBN section try to enable VoLTE. If after this volte still doesn't work, enable diagnostic ports via engineering menu, and only after via QPST and PDC activate carrier profiles for your region (Vodafone Australia).
P.S: Making it via root is easier, as Volte is enabled via Magisk module, and diagnostic ports for PDC & QPST are enabled via basically two commands in adb.
Click to expand...
Click to collapse
Do you have any guide for this?
Secrecy not worki anymore
Rootk1t said:
Actually there is a way, but not straightforward and if you mess up, you can brick your phone.
First of all you need to unlock engineering menu in OOS12 and in MBN section try to enable VoLTE. If after this volte still doesn't work, enable diagnostic ports via engineering menu, and only after via QPST and PDC activate carrier profiles for your region (Vodafone Australia).
P.S: Making it via root is easier, as Volte is enabled via Magisk module, and diagnostic ports for PDC & QPST are enabled via basically two commands in adb.
Click to expand...
Click to collapse
Thank you for the tip! I'm pretty comfortable with digging around like that.
I'll definitely give that one a go in the near future. It's my daily driver at the moment so I need to pick a time or use an old backup phone for a while.
Much appreciated!
IAAxl said:
Why not try LineageOS 19.1(Android 12)?
Volte works fine out of box.
You just need gapps, magisk and some module to pass safteynet check, then it's all good.
Click to expand...
Click to collapse
Thanks! LineageOS is usually my goto, but in this case it's my daily and I need all the secure banking and similar apps to work.
Finally!!! GUIDE To enable VoLTE and VoWifi on OOS 12.1 without root
Hello everyone, finally there is a way to enable VoLte without root You need 2 apps for the process .. Before starting if you have 2 sims make sure you disable the second sim and proceed.. After you finish with the first sim then enable the...
forum.xda-developers.com
ghost.ign said:
Finally!!! GUIDE To enable VoLTE and VoWifi on OOS 12.1 without root
Hello everyone, finally there is a way to enable VoLte without root You need 2 apps for the process .. Before starting if you have 2 sims make sure you disable the second sim and proceed.. After you finish with the first sim then enable the...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank you!
Will give it a go on my wife's OP9 which I've kept on OOS11 because on this.
FYI I recently bought a OP10 Pro EU version and everything works perfectly including VoLTE & VoWIFI.
Looks like maybe the Global versions are having VoLTE issues in Australia on some carriers.
Only just bit the bullet 2 weeks ago with the OP8T and installed LineageOS 20. Works great out of the box.
I might consider re-flashing the stock OOS13 ROM on the 8T just to try this fix too.
ghost.ign said:
Finally!!! GUIDE To enable VoLTE and VoWifi on OOS 12.1 without root
Hello everyone, finally there is a way to enable VoLte without root You need 2 apps for the process .. Before starting if you have 2 sims make sure you disable the second sim and proceed.. After you finish with the first sim then enable the...
forum.xda-developers.com
Click to expand...
Click to collapse
UPDATE: GREAT NEWS! GOT VoLTE WORKING ON 4G & 5G - SOLVED
Thank you so much @ghost.ign !!
I finally got around to unbricking my almost forgotten OP8T KB2005 International Version using MSMDownloaderTool and tried the tweak using the link you provided. It worked!
Best part was, it worked on the current OOS13 and persists after reboot, as well as removing & reinserting the SIM. Very happy!
It's now time to update my wife's OP9 and do the same. Fingers crossed.
Many, many thanks!!!
FYI - For anyone else reading. I found the details to unbrick my OP8T here:
[OP8T][OOS KB05AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
TIP: When installing the Qualcomm drivers on Windows, boot using the Windows start-up option no.7 to allow unsigned drivers. (Knowing that could've saved me a couple of hours.)
joe460 said:
Thank you for the tip! I'm pretty comfortable with digging around like that.
I'll definitely give that one a go in the near future. It's my daily driver at the moment so I need to pick a time or use an old backup phone for a while.
Much appreciated!
Click to expand...
Click to collapse
Hey any workaround to access pdc to change mbn profile on oos12 non root?
I have tried the shizuku and pixelims, but my ims status not registered.
redzyy said:
Hey any workaround to access pdc to change mbn profile on oos12 non root?
I have tried the shizuku and pixelims, but my ims status not registered.
Click to expand...
Click to collapse
i think i saw some post related to how to access PDC and that kinda stuff on OOS 12 or 13, i will post it here let me check if it is still there.
redzyy said:
Hey any workaround to access pdc to change mbn profile on oos12 non root?
I have tried the shizuku and pixelims, but my ims status not registered.
Click to expand...
Click to collapse
[GUIDE][A11][A12][A13] VoLTE and VoWIFI on custom/stock ROMs with any Carrier
Activate VoLTE & VoWIFI on custom/stock ROMs with any Carrier Yes, yes, I know that this is not the first thread with activation VoLTE and VoWIFI. But my thread will be more convenient and easier to understand. ATTENTION ! ! ! These methods...
forum.xda-developers.com
ghost.ign said:
[GUIDE][A11][A12][A13] VoLTE and VoWIFI on custom/stock ROMs with any Carrier
Activate VoLTE & VoWIFI on custom/stock ROMs with any Carrier Yes, yes, I know that this is not the first thread with activation VoLTE and VoWIFI. But my thread will be more convenient and easier to understand. ATTENTION ! ! ! These methods...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks for the response, i checked that thread already, for oos12, they need rooted phone.
I can confirm that Oneplus 8T (KB2003) on OOS13, using Shizuku and Pixel IMS can activate VOLTE. I am using KB2003_11_F.63 build.
warlord2045 said:
I can confirm that Oneplus 8T (KB2003) on OOS13, using Shizuku and Pixel IMS can activate VOLTE. I am using KB2003_11_F.63 build.
Click to expand...
Click to collapse
I'm unable to confirm, maybe someone else can. I can however suggest that there's is likely no harm trying. I believe it should work across all carrier unlocked models.
Give it a go and report back if you can share.
FYI - since upgrading from OOS11 to OOS13 my model number has changing from KB2000 to KB2005 using the standard OTA upgrade process.
Rootk1t said:
Actually there is a way, but not straightforward and if you mess up, you can brick your phone.
First of all you need to unlock engineering menu in OOS12 and in MBN section try to enable VoLTE. If after this volte still doesn't work, enable diagnostic ports via engineering menu, and only after via QPST and PDC activate carrier profiles for your region (Vodafone Australia).
P.S: Making it via root is easier, as Volte is enabled via Magisk module, and diagnostic ports for PDC & QPST are enabled via basically two commands in adb.
Click to expand...
Click to collapse
Recent updates have made this method a more dangerous option. I can't go back
If you know how to put it back together, I'd love to know.