Related
The Screenshot is below. I got stuck in the H2OS 2.0 so I flash the cos12 to save it from bricking. Then I flash the TWRP. When I wanted to flash a CM13,the problem in the screenshot occurred. Need some Help here.
Help,PLZ
I don't have another phone.I gotta fix this as soon as possible in case I don't miss any important phone calls. plz. Somebody gives me a hand.
The problem is that you're not installing the TWRP flashable rom.
See that the zip file of the CM13 build you tried to install is called cm13......bacon-signed-fastboot......zip. So you're trying to install a fastboot rom with a custom recovery, instead of trying to install a custom rom for a custom recovery. That's why TWRP doesn't found any meta-inf folder.
When downloading the rom in the official web be sure to download the one compatible with custom recoveries.
mustang_ssc said:
The problem is that you're not installing the TWRP flashable rom.
See that the zip file of the CM13 build you tried to install is called cm13......bacon-signed-fastboot......zip. So you're trying to install a fastboot rom with a custom recovery, instead of trying to install a custom rom for a custom recovery. That's why TWRP doesn't found any meta-inf folder.
When downloading the rom in the official web be sure to download the one compatible with custom recoveries.
Click to expand...
Click to collapse
Okay,Thanks. But when I tried another ROM (NucleaRom-V2.1.4-BETA[7.0]-bacon-20161011-0245.zip) ,I failed again. It occurred error 7. The TWRP is universal in many ROMs,right?I used to installed many with it successfully.However, I failed again and again this time.
SimonYJB said:
Okay,Thanks. But when I tried another ROM (NucleaRom-V2.1.4-BETA[7.0]-bacon-20161011-0245.zip) ,I failed again. It occurred error 7. The TWRP is universal in many ROMs,right?I used to installed many with it successfully.However, I failed again and again this time.
Click to expand...
Click to collapse
The 7 error use to happen when you get a bad download and there is missing data. You can compare the md5 of the rom to check if there are missing data or simply download it again, or try another rom.
Also i suggest you to use the latest TugaPower TWRP.
mustang_ssc said:
The 7 error use to happen when you get a bad download and there is missing data. You can compare the md5 of the rom to check if there are missing data or simply download it again, or try another rom.
Also i suggest you to use the latest TugaPower TWRP.
Click to expand...
Click to collapse
Actually,I'm using the latest TeamWin - TWRP. Here is the screenshot. I downloaded the cm13 official but it didn't work too. Could you give a guide to get a Tugapower TWRP? Maybe it will work with the TugaPower TWRP.
SimonYJB said:
Actually,I'm using the latest TeamWin - TWRP. Here is the screenshot. I downloaded the cm13 official but it didn't work too. Could you give a guide to get a Tugapower TWRP? Maybe it will work with the TugaPower TWRP.
Click to expand...
Click to collapse
Did you do wipes (system, data, cache and dalvik cache) before flashing the roms?
mustang_ssc said:
Did you do wipes (system, data, cache and dalvik cache) before flashing the roms?
Click to expand...
Click to collapse
yea,of course. This problem began at my last ROM(H2OS V2.0.1). Is it the main reason? Before that ROM ,everything goes well.
SimonYJB said:
yea,of course. This problem began at my last ROM(H2OS V2.0.1). Is it the main reason? Before that ROM ,everything goes well.
Click to expand...
Click to collapse
Well, honestly i don't know.
I would suggest you to check if the files you have downloaded are not corrupted in case the computer where you're downloading the roms is corrupt them, i experienced that case. So you can check md5 following this guide: http://forums.androidcentral.com/optimus-v-rooting-roms-hacks/113984-what-md5-how-use-verify-your-download.html
And the TWRP i suggested you is here: http://forum.xda-developers.com/oneplus-one/development/unofficial-twrp-3-0-x-tugapower-t3398366. You can install it though fastboot or try with the current recovery you have.
mustang_ssc said:
Well, honestly i don't know.
I would suggest you to check if the files you have downloaded are not corrupted in case the computer where you're downloading the roms is corrupt them, i experienced that case. So you can check md5 following this guide: http://forums.androidcentral.com/optimus-v-rooting-roms-hacks/113984-what-md5-how-use-verify-your-download.html
And the TWRP i suggested you is here: http://forum.xda-developers.com/oneplus-one/development/unofficial-twrp-3-0-x-tugapower-t3398366. You can install it though fastboot or try with the current recovery you have.
Click to expand...
Click to collapse
Thank you very much. I really appreciate it. I'll try as you say.Hope the issues can be solved.:good:
The the download get completed phone goes to recovery mode but then nothing happens, waited for some time, tried multiple time to install the downloaded updated but nothing happens after it goes to recovery mode.
I don't want to flash it manually and set up all things again.
Is there any way i can install updated cm 14.1 manually and get the same app+ data as it was in previous??
Any help would be appreciated, thanks in advance.
When phone reboots to recovery just tap install.
Navigate to sdcard/cmupdater folder and click the zip. It will update ROM and should not wipe anything.
Reboot
Other than that you can install the twrp listed in the official cm14.1 op.
do it manually
Its the problem with Twrp... try this one...a new twrp Devoloped by alberto... U can get from here https://www.androidfilehost.com/?fid=529152257862684303
He is the developer of cm 14.1 moto g3
Sent from my MotoG3 using Tapatalk
hossman said:
When phone reboots to recovery just tap install.
Navigate to sdcard/cmupdater folder and click the zip. It will update ROM and should not wipe anything.
Reboot
Other than that you can install the twrp listed in the official cm14.1 op.
Click to expand...
Click to collapse
Thanks @hossman it worked for me
hossman said:
When phone reboots to recovery just tap install.
Navigate to sdcard/cmupdater folder and click the zip. It will update ROM and should not wipe anything.
Reboot
Other than that you can install the twrp listed in the official cm14.1 op.
Click to expand...
Click to collapse
Thanks @hossman it worked for me
shankufx4y said:
Its the problem with Twrp... try this one...a new twrp Devoloped by alberto... U can get from here https://www.androidfilehost.com/?fid=529152257862684303
He is the developer of cm 14.1 moto g3
Click to expand...
Click to collapse
Thanks bro, but actually I'm not with pc and flashify is not loading it, but thanks for this suggestion, soon I'm going to installe this twrp.
manmali said:
Thanks bro, but actually I'm not with pc and flashify is not loading it, but thanks for this suggestion, soon I'm going to installe this twrp.
Click to expand...
Click to collapse
Here is the new version
Squid updated TWRP Osprey 3.0.2-r5
Download link : http://forum.xda-developers.com/devd...1051#downloads
Official XDA Post : http://forum.xda-developers.com/2015...-2015-t3170537
Good day to everyone! I wish to provide proper steps on how to install the latest Oreo custom ROMs via TWRP in order to lessen the clutter in the custom ROM threads.
You'll need the following:
Latest TWRP Official (Fastboot TWRP)
Latest TWRP Installer (PERMANENT TWRP)
Considering you already installed TWRP via fastboot, we'll make it so that it will be permanently installed and you will not need to flash TWRP via bootloader again.
Download ROM + GApps (or no gapps if Pixel Experience)
Reboot to latest Official TWRP
Do necessary wipes (FORMAT data if having storage number issue; if not, wipe system/data/cache) then transfer ROM + gapps + magisk to internal/external storage
Flash ROM (don't reboot)
Flash latest TWRP Installer (for Permanent TWRP)
Reboot recovery (no need to transfer slots anymore as TWRP does it automatically)
Flash Gapps + Magisk
Reboot to system
To DIRTY FLASH or update the same ROM with an updated version
Reboot to recovery
Flash ROM
Flash TWRP Installer
Reboot recovery
Flash Gapps + Magisk
Reboot to system
For installing custom kernels
Download custom kernel
Reboot recovery
Flash custom kernel
Reboot to system
All of these has been tried and tested by me already.
Hey , where to flash rom??
As you have written gapps + magisk , gapps + magisk twice
sikoo1996 said:
Hey , where to flash rom?
As you have written gapps + magisk , gapps + magisk twice
Click to expand...
Click to collapse
I don't know what you mean. Read it again but slowly.
thnx man.
please add instructions to flash twrp permanent or share link.
vkbhanwariya said:
thnx man.
please add instructions to flash twrp permanent or share link.
Click to expand...
Click to collapse
+1
vkbhanwariya said:
thnx man.
please add instructions to flash twrp permanent or share link.
Click to expand...
Click to collapse
dceamit46 said:
+1
Click to expand...
Click to collapse
Guys, TWRP Installer IS the Permanent TWRP. That's why you need to flash it every time after flashing custom ROMs.
joeyhuab said:
Guys, TWRP Installer IS the Permanent TWRP. That's why you need to flash it every time after flashing custom ROMs.
Click to expand...
Click to collapse
thanks mate now ROM flashing seems very easy
vkbhanwariya said:
thanks mate now ROM flashing seems very easy
Click to expand...
Click to collapse
You're welcome! Good luck in switching ROMs!
Sent from my Xiaomi Mi A1 using XDA Labs
joeyhuab said:
You're welcome! Good luck in switching ROMs!
Click to expand...
Click to collapse
I really want to thank you for putting this up. Its immensely helpful and once again you are best at what you do.
gunmanrishi said:
I really want to thank you for putting this up. Its immensely helpful and once again you are best at what you do.
Click to expand...
Click to collapse
You're more than welcome and I'm always more than glad to help out the community. :highfive:
Sent from my Xiaomi Mi A1 using XDA Labs
With custom ROMs we have to install Twrp installer every time along with ROM zip, bit awkward.
Is it just me but every time I flash twrp after flashing rom, I got error 20 when flashing gapps. Here's my steps:
- flash rom
- switch partition
- flash twrp
- reboot recovery (or bootloader then flashboot recovery)
- flash gapps -> error 20
Without flashing twrp permanent, I can flash gapps, no error.
madhpharma said:
With custom ROMs we have to install Twrp installer every time along with ROM zip, bit awkward.
Click to expand...
Click to collapse
Yep. That's because the ROM being flashed overwrites the recovery since there's no recovery partition.
kopitalk said:
Is it just me but every time I flash twrp after flashing rom, I got error 20 when flashing gapps. Here's my steps:
- flash rom
- switch partition
- flash twrp
- reboot recovery (or bootloader then flashboot recovery)
- flash gapps -> error 20
Without flashing twrp permanent, I can flash gapps, no error.
Click to expand...
Click to collapse
Did you flash the TWRP.img or TWRP Installer.zip in TWRP?
Sent from my Xiaomi Mi A1 using XDA Labs
joeyhuab said:
Yep. That's because the ROM being flashed overwrites the recovery since there's no recovery partition.
Did you flash the TWRP.img or TWRP Installer.zip in TWRP?
Click to expand...
Click to collapse
Twrp installer, to be exact Twrp-recoveryInstaller-3.2.1-2-oreo.zip
joeyhuab said:
Guys, TWRP Installer IS the Permanent TWRP. That's why you need to flash it every time after flashing custom ROMs.
Click to expand...
Click to collapse
If we need to flash it every time after flash rom so how it's called permanent TWRP I don't understand. That because our device don't have recovery partition? If that so where this TWRP installed ( in which partition)?
cherryb8844 said:
If we need to flash it every time after flash rom so how it's called permanent TWRP I don't understand. That because our device don't have recovery partition? If that so where this TWRP installed ( in which partition)?
Click to expand...
Click to collapse
It's called permanent twrp because it won't get replaced by built in recovery whenever you reboot to recovery from system. TWRP gets installed within a part of the system partition.
Sent from my Xiaomi Mi A1 using XDA Labs
kopitalk said:
Is it just me but every time I flash twrp after flashing rom, I got error 20 when flashing gapps. Here's my steps:
- flash rom
- switch partition
- flash twrp
- reboot recovery (or bootloader then flashboot recovery)
- flash gapps -> error 20
Without flashing twrp permanent, I can flash gapps, no error.
Click to expand...
Click to collapse
Error 20 if I'm not wrong, means you are using the wrong gapps package.
Are you using the right one?
varben said:
Error 20 if I'm not wrong, means you are using the wrong gapps package.
Are you using the right one?
Click to expand...
Click to collapse
Yes, I certainly use the right one (8.1), that's why I was baffled when twrp says that my device is 7.1.2 every time I tried to flash the 8.1 gapps. Anyway, flashing rom then straightaway followed by gapps and magisk was fine. I can flash twrp installer later on. But I just don't understand why.
kopitalk said:
Yes, I certainly use the right one (8.1), that's why I was baffled when twrp says that my device is 7.1.2 every time I tried to flash the 8.1 gapps. Anyway, flashing rom then straightaway followed by gapps and magisk was fine. I can flash twrp installer later on. But I just don't understand why.
Click to expand...
Click to collapse
Well that's weird. Works for me by flashing Gapps and Magisk after rebooting to recovery since it switches slots when you do that. Did you possibly come from a Nougat ROM which is why that's the error showing up?
Sent from my Xiaomi Mi A1 using XDA Labs
joeyhuab said:
Well that's weird. Works for me by flashing Gapps and Magisk after rebooting to recovery since it switches slots when you do that. Did you possibly come from a Nougat ROM which is why that's the error showing up?
Click to expand...
Click to collapse
I was thinking of that too but no, I was on Oreo Jan built the first time I rooted the phone and flash LOS15.1. Do you think I should at least flash Oreo stock once? Maybe my bootloader is still Nougat
Hi, how do I install the latest android P on my oneplus 6? I have an unlocked bootloader with twrp installed but not rooted.
Download the P zip via OnePlus forums, flash it through the update section in settings and wipe the phone via recovery. It will wipe TWRP though and replace it with stock recovery.
roniistar said:
Hi, how do I install the latest android P on my oneplus 6? I have an unlocked bootloader with twrp installed but not rooted.
Click to expand...
Click to collapse
Download the full version, install in TWRP 3.2.1 and install TWRP immediately afterwards, then back to the TWRP menu and reinstall TWRP.zip again, then restart and enjoy
ed-gonzo said:
Download the full version, install in TWRP 3.2.1 and install TWRP immediately afterwards, then back to the TWRP menu and reinstall TWRP.zip again, then restart and enjoy
Click to expand...
Click to collapse
Have you tried this? I don't think this will work. Don't i have to wipe everything?
Mike.YT said:
Download the P zip via OnePlus forums, flash it through the update section in settings and wipe the phone via recovery. It will wipe TWRP though and replace it with stock recovery.
Click to expand...
Click to collapse
Thanks. Will give this a try
roniistar said:
Have you tried this? I don't think this will work. Don't i have to wipe everything?
Click to expand...
Click to collapse
Yes, it worked this way for me
ed-gonzo said:
Download the full version, install in TWRP 3.2.1 and install TWRP immediately afterwards, then back to the TWRP menu and reinstall TWRP.zip again, then restart and enjoy
Click to expand...
Click to collapse
When u say back to twrp menu you mean after reboot to recovery and then to install twrp.zip or in the same session to install twrp twice?
what are known bugs in DP3?
does snap chat work? as reports say that safety net fails
galza said:
When u say back to twrp menu you mean after reboot to recovery and then to install twrp.zip or in the same session to install twrp twice?
Click to expand...
Click to collapse
So that TWRP is not deleted, I recommend to install it again in TWRP menu!
Sure is safe.
virtyx said:
what are known bugs in DP3?
does snap chat work? as reports say that safety net fails
Click to expand...
Click to collapse
works but i have magisk installed so maybe that did something
NateDev said:
works but i have magisk installed so maybe that did something
Click to expand...
Click to collapse
reveted back to 5.1.9
DP3 is nice, but too buggy, laggy and non user friendly, the gestures feel so much different from stable, i logged a few bugs but not suitable for a DD
i am unable to root android p beta 3 and twrp also not working on my one plus 6 why twrp not working and why no root
manohar shenolikar said:
i am unable to root android p beta 3 and twrp also not working on my one plus 6 why twrp not working and why no root
Click to expand...
Click to collapse
Install the stable version of android p now and twrp does work. use bluesparks twrp version found in xda.
But what TWRP? Is the TWRP on the official site working also on Android 9?
Hi, i have a question :
I'm on Android pie stable with root and magisk.
But i can't make a advanced reboot to launch TWRP, anyone as a issue please ?
Pepinow said:
Hi, i have a question :
I'm on Android pie stable with root and magisk.
But i can't make a advanced reboot to launch TWRP, anyone as a issue please ?
Click to expand...
Click to collapse
It's been removed in pie.
---------- Post added at 10:35 AM ---------- Previous post was at 10:34 AM ----------
zappomax said:
But what TWRP? Is the TWRP on the official site working also on Android 9?
Click to expand...
Click to collapse
No, use bluespark twrp found on his kernel thread.
yldlj said:
It's been removed in pie.
Yes, i see that. How do I install a new kernel without going through TWRP?
It's maybe me but i can't lunch TWRP or it's only by plateform tools ?
Click to expand...
Click to collapse
Pepinow said:
yldlj said:
It's been removed in pie.
Yes, i see that. How do I install a new kernel without going through TWRP?
It's maybe me but i can't lunch TWRP or it's only by plateform tools ?
Click to expand...
Click to collapse
Flash through ex kernel manager app
If the kernel uses "any kernel" then go to magisk and flash magisk one more time aswell, reboot.
What your saying is that you can't boot to twrp in any way? Not even with phone off and volume down? If not, reinstall twrp (I recommend blu_spark)
Click to expand...
Click to collapse
whizeguy said:
Pepinow said:
Flash through ex kernel manager app
If the kernel uses "any kernel" then go to magisk and flash magisk one more time aswell, reboot.
What your saying is that you can't boot to twrp in any way? Not even with phone off and volume down? If not, reinstall twrp (I recommend blu_spark)
Click to expand...
Click to collapse
I don't have ex kernel, it's not free it's exactly ?
Exact, i can't boot twrp, phone off and volume down take a screenshot and if its shutdown, there is a simple reboot.
I'm noob lol, if i reinstall twrp it's wipe my phone ?
Click to expand...
Click to collapse
@Pepinow Power off your phone. Hold vol up and power, that will take you to fastboot. From there use the vol keys to show recovery at the top then boot to it. This is of course assuming you flashed the twrp zip when first installing it
hi, i have rooted my oneplus 2 with custom recovery twrp installed device using Lineageos 15 with android 8.1, i was trying to flash Magisk but its failed and sudden happening this in my one plus 2 when i am going to recovery mode through Volume down+Power button phone is restarting its not going in Teamwin recovery.
please help me
keepingtocarry said:
hi, i have rooted my oneplus 2 with custom recovery twrp installed device using Lineageos 15 with android 8.1, i was trying to flash Magisk but its failed and sudden happening this in my one plus 2 when i am going to recovery mode through Volume down+Power button phone is restarting its not going in Teamwin recovery.
please help me
Click to expand...
Click to collapse
Try flashing TWRP again.
Sent from my LGL84VL using Tapatalk
Droidriven said:
Try flashing TWRP again.
Click to expand...
Click to collapse
Actually i have tried from twrp app but not getting sucess when i go into fastboot mode after 10 seconds device going to shut off
keepingtocarry said:
Actually i have tried from twrp app but not getting sucess when i go into fastboot mode after 10 seconds device going to shut off
Click to expand...
Click to collapse
I believe you need a modified boot.img to flash Magisk. Have you installed a modified boot.img to enable using Magisk?
Sent from my LGL84VL using Tapatalk
Droidriven said:
I believe you need a modified boot.img to flash Magisk. Have you installed a modified boot.img to enable using Magisk?
Click to expand...
Click to collapse
Yes i was trying to install magisk. And magisk said to patch boot.img so i did it. And this is actually happend
.. so what should i do now?
keepingtocarry said:
Yes i was trying to install magisk. And magisk said to patch boot.img so i did it. And this is actually happend
.. so what should i do now?
Click to expand...
Click to collapse
You don't just patch the boot.img, you flash the newly created boot.img onto the device and then you flash magisk, such as described in the link below using method 2.
https://droidfeats.com/how-to-install-magisk/
You might need to reflash your full stock firmware to repair your device and then try installing Magisk again using the instructions above.
Sent from my LGL84VL using Tapatalk
Droidriven said:
You don't just patch the boot.img, you flash the newly created boot.img onto the device and then you flash magisk, such as described in the link below using method 2.
https://www.the***********.com/install-magisk-root-android-devices/
You might need to reflash your full stock firmware to repair your device and then try installing Magisk again using the instructions above.
Click to expand...
Click to collapse
This link is not working. So can you tell the process to flash stock firmware.. I'm not very knowledgeable in these so help me please
keepingtocarry said:
This link is not working. So can you tell the process to flash stock firmware.. I'm not very knowledgeable in these so help me please
Click to expand...
Click to collapse
I only flash boot.img so any way to get out of it through magisk?
keepingtocarry said:
I only flash boot.img so any way to get out of it through magisk?
Click to expand...
Click to collapse
Try the link now, read method 2. If you can't get it to work, try using the method to uninstall Magisk or try flashing the stock firmware. To learn how to do that, do a Google search for:
"Return to stock (your model number)"
Sent from my LGL84VL using Tapatalk
Droidriven said:
Try the link now, read method 2. If you can't get it to work, try using the method to uninstall Magisk or try flashing the stock firmware. To learn how to do that, do a Google search for:
"Return to stock (your model number)"
Click to expand...
Click to collapse
Hey bro got success... ...flashed twrp installed lineage 15, and gapps 8.1 stock. Now a new problem facing that lineage camera replaced by google camera ... And google camera is not working..any method to remove google camera and back to lineage camera app.
keepingtocarry said:
Hey bro got success... ...flashed twrp installed lineage 15, and gapps 8.1 stock. Now a new problem facing that lineage camera replaced by google camera ... And google camera is not working..any method to remove google camera and back to lineage camera app.
Click to expand...
Click to collapse
Install Magisk to gain root, then get a copy of lineage camera, use Titanium Backup to remove GCam, then install lineage camera and use Titanium Backup to convert it to system app.
You might not get the camera to work, no matter what you do.
Sent from my LGL84VL using Tapatalk