Database Info

HTC ONE M8whl rom flashing

Friends and android geeks,could someone tell me the solution for my problem?
I have a htc one m8whl device and its unlocked and rooted now. I have a twrp 3.0.2 recovery installed on my device.
problem:
I face problem when flashing a cyanogenmod13-nightly os through twrp.
everytime i flash it , it shows "failed".

sanjeevikrishna said:
everytime i flash it , it shows "failed".
Click to expand...
Click to collapse
It doesn't just say "failed", it should give you an error code, like code 7 or something. Get back with the error code please.

thank you for replying
RAZERZDAHACKER said:
It doesn't just say "failed", it should give you an error code, like code 7 or something. Get back with the error code please.
Click to expand...
Click to collapse
Now the problem is actually solved. The error(sry did not notice the code) occurred only when i flashed the rom from usb-otg.
It was solved when i tried flashing from sd-card.
And i would be happy to know some good custom Roms for my htc one m8whl.
Thank you.

sanjeevikrishna said:
Now the problem is actually solved. The error(sry did not notice the code) occurred only when i flashed the rom from usb-otg.
It was solved when i tried flashing from sd-card.
And i would be happy to know some good custom Roms for my htc one m8whl.
Thank you.
Click to expand...
Click to collapse
CyanogenMod is if you like near stock android with some features on top.

ERROR 7;
RAZERZDAHACKER said:
CyanogenMod is if you like near stock android with some features on top.
Click to expand...
Click to collapse
Thank you dear friend.
I tried to find out the error code that occurred in previous sessions and it was ERROR:7 as you suggested. It happened with me when i tried to install NusenSeven for sprint m8 as well.
Additionally, I tried installing a couple of ROMS
1) BadBoys for m8 and
2) Wolla for m8.'
Both were installed successfully but unfortunately the Radio was not working. Plus both these Rom's kept on restarting multiple times in an hour for the whole day. Even-though it had many cool customisation's i couldn't use it.
Finally, i returned back to cm-13.0 nightly but Still it has two major problem
1) the Radio is down .
2) problem with the Gapps. ( I flashed the Gapps properly after the rom , but when i start my device i cannot find any apps from Gapps package. NOTE: There was a flash successful message on flashing gapps ).
kindly help me.
thank you in advance.

Odin fails at cm.bin while flashing Galaxy J710FN

I was trying to flash Glaxy J710FN with stock ROM using Odin. But it fails at cm.bin and shows 'Complete write operation failed'. Please do help me with this.

I am facing the same issue, I've googled the problem and Its something to do with the wrong baseband version which cannot be downgraded.
I am on supernova ROM and want to switch to complete stock, unroot for warranty.
DId you find any solution?

jumbobombo said:
I am facing the same issue, I've googled the problem and Its something to do with the wrong baseband version which cannot be downgraded.
I am on supernova ROM and want to switch to complete stock, unroot for warranty.
DId you find any solution?
Click to expand...
Click to collapse
It has something to do with the USB cable, USB port and the installed driver versions. Update your driver to the latest version. Try using a different USB port, never use a USB hub. And that's it.

Jezwn said:
It has something to do with the USB cable, USB port and the installed driver versions. Update your driver to the latest version. Try using a different USB port, never use a USB hub. And that's it.
Click to expand...
Click to collapse
Also check whether you're trying to downgrade to a former version of Android which can't be done using Odin. Try getting the latest version of your stock ROM which you can Google yourself.

Thanks for your reply
I tried with different USB port but receiving same error.
Supernova custom ROM is on Android 6 and the firmware that I downloaded are also Android 6
I am completely clueless on how to solve this issue. I've been sitting and researching about this since 2 days now with no luck

jumbobombo said:
Thanks for your reply
I tried with different USB port but receiving same error.
Supernova custom ROM is on Android 6 and the firmware that I downloaded are also Android 6
I am completely clueless on how to solve this issue. I've been sitting and researching about this since 2 days now with no luck
Click to expand...
Click to collapse
You do have a J710FN right. Even though the downloaded one is Android 6 it has got variants as Samsung provides updations frequently. J710FXXU2APK6 is my current basaeband version. If I try to flash an update below this version it shows the same error. So do check your current version and try flashing an update above that.

Jezwn said:
You do have a J710FN right. Even though the downloaded one is Android 6 it has got variants as Samsung provides updations frequently. J710FXXU2APK6 is my current basaeband version. If I try to flash an update below this version it shows the same error. So do check your current version and try flashing an update above that.
Click to expand...
Click to collapse
Hey,
I tried a firmware of SM-J710F instead of SM-J710FN and odin worked.
I got official full stock ROM.
But issue is the boot screen when you first switch on the phone. It is still of the previous custom ROM Supernova. So it appears as "Samsung S8" Because of the custom ROM
Even though I flashed complete firmware through Odin the S8 did not return to stock
I am on complete stock with no root now
How to change the first boot image back to J7?
Thanks in advance

jumbobombo said:
Hey,
I tried a firmware of SM-J710F instead of SM-J710FN and odin worked.
I got official full stock ROM.
But issue is the boot screen when you first switch on the phone. It is still of the previous custom ROM Supernova. So it appears as "Samsung S8" Because of the custom ROM
Even though I flashed complete firmware through Odin the S8 did not return to stock
I am on complete stock with no root now
How to change the first boot image back to J7?
Thanks in advance
Click to expand...
Click to collapse
Are you sure you're on J710FN? The problem with the boot image would be that the ROM you're saying stock is a custom one with the S8 boot image. Try wiping all your data including David cache and flash the ROM again. If it's still the same root your phone and change the boot image.

Galaxy s 7 flat no signal after root and custom room installation

i just rooted my phone and installed superstock rom with no problems in rooting or installing twrp and custom rom . but now i have no signal .simple solutions will not help i have no roaming in the setting . looks like the radio.img file is missing . any ideas how to fix it ????

Flash stock to make sure it's working first and it's not a phone issue

*Detection* said:
Flash stock to make sure it's working first and it's not a phone issue
Click to expand...
Click to collapse
Tried . not working nothing can be installed through odin it keeps failing , its something with samsung security may be after the root, its type of a dead phone now /:

jiries said:
Tried . not working nothing can be installed through odin it keeps failing , its something with samsung security may be after the root, its type of a dead phone now /:
Click to expand...
Click to collapse
Maybe IMEI blocked if stolen or contract not paid off, is it 2nd hand?

Did you try using different USB cables and USB ports?
The phone may have to be force flashed using different hardware such as an octopusbox.

audit13 said:
Did you try using different USB cables and USB ports?
The phone may have to be force flashed using different hardware such as an octopusbox.
Click to expand...
Click to collapse
is there any other solution other than the box ??
in older versions of android we had the possibility to put the radio.img and other simpler solutions .

Usually, flashing a complete stock ROM with Odin will flash everything together including the bootloader, baseband/modem, recovery, and system.
Post the Odin log as there may be something in there that can help resolve the issue.

jiries said:
Tried . not working nothing can be installed through odin it keeps failing , its something with samsung security may be after the root, its type of a dead phone now /:
Click to expand...
Click to collapse
Go to daveloper settings and enable OEM unlock
Now flash stock and latest firmware with odin
And use latest odin version
Sent from my [device_name] using XDA-Developers Legacy app

Try installing dev 5.6 roms from alexander...oem hould

*Detection* said:
Maybe IMEI blocked if stolen or contract not paid off, is it 2nd hand?
Click to expand...
Click to collapse
yes it is , but am pretty sure its not stolen , bought from mobile store was almost new when i got it .

i just managed to fix my phone (in phone store lab , probably they used the box).
last time i rooted the phone and then installed "noutfan " custom rom there was no problem with IMEI , signal or software issues , exept for many bugs in firmware and gear VR made the firmware collapse .
after this i installed superstock rom (without flashing bootloader or modem) i installed kernel and everything which was in the aroma installer ( its not the first time that i flash this rom . worked fine before last time) after installation last timei lost the imei and phone signal (before fixing the phone) .
i dont know what went wrong this time ,usually i install custom roms with no problem . now i have 7.0 stock rom (after fixing the phone) and i want to install custom rom but afraid of facing the same ptoblem .
Any ideas ?? what have i done wrong when i have installed superstock last time?? why i lost imei ?? how to avoid this problem when rooting and installing the custom rom ???

Bluetooth Issue, ROM Flash

Hi all,
I recently upgraded to Android 10 and suddenly the mic of my bluetooth earphones stop working, battery draining very quickly, phone heating. Is there a solution to this?
If not, how to I flash stock ROM from scratch. My bootloader is locked with no root. I want to keep my bootloader locked if its possible.
Device Info:
OnePlus 7
GM1901
Oxygen OS 10.0.1.GM57AA
Thanks

faraz1992 said:
Hi all,
I recently upgraded to Android 10 and suddenly the mic of my bluetooth earphones stop working, battery draining very quickly, phone heating. Is there a solution to this?
If not, how to I flash stock ROM from scratch. My bootloader is locked with no root. I want to keep my bootloader locked if its possible.
Device Info:
OnePlus 7
GM1901
Oxygen OS 10.0.1.GM57AA
Thanks
Click to expand...
Click to collapse
You can do a factory reset from Android settings - system - reset - last point.
That's what I recommend as I'm sure there's something going roque on your phone

A friend had the same issue on the same device and Android 10 update. He flashed stock ROM and problem was solved. Is there a noob guide for flashing ROM on Oneplus7

faraz1992 said:
A friend had the same issue on the same device and Android 10 update. He flashed stock ROM and problem was solved. Is there a noob guide for flashing ROM on Oneplus7
Click to expand...
Click to collapse
Do what I suggested above, that's the same. Or download the 10.0.1 stock rom and flash it from local, but that's more complicated.

I unlocked my bootloader, flashed twrp, flashed stock rom after a full wipe. Still the problem is there. Can someone please check if this is a hardware level problem in all devices?

faraz1992 said:
I unlocked my bootloader, flashed twrp, flashed stock rom after a full wipe. Still the problem is there. Can someone please check if this is a hardware level problem in all devices?
Click to expand...
Click to collapse
You didn't mention if you have tried another headset. Also you did not mention what headset you have, maybe someone has it.

strongst said:
You didn't mention if you have tried another headset. Also you did not mention what headset you have, maybe someone has it.
Click to expand...
Click to collapse
I tried other headset. Doesn't work. I'm using boAtRocker 255.
Thanks

you can go to the oneplus website, download the official original rom to the storage, go to settings, system, system updates, click on the gear icon in upper right, and select local upgrade, then select the official rom you downloaded to the storage, that will install the original software.

Question <TB-J706F> Auto-rotation & Auto Brightness Broken.

Hello, in advance I apologize for my English, I am using translator.
Yesterday after suffering a battery drain that left my tablet from 100% to 70% in Standby without Wi-Fi, bluetooth or GPS or anything activated I decided to format my tablet, but as I had installed TWRP better I decided to reinstall the original rom complete
I followed all the steps indicated in this forum to reinstall the firmware and everything went well, except that when I restarted it stayed in bootloop, I tried with several versions and only with the <TB-J706F_S250260_210804_ROW>worked, all the others that are in the repository are in bootloop.
After configuring everything I went up I realized that the auto rotation of the screen did not work, neither did the automatic brightness, I do not know that other things do not work but that at least they are the most important, so I do not know what happened because before changing the Rom everything worked well
As if that were not enough, fastboot does not detect my PC or my Laptop, so I can not root to do an exhaustive search, nor can I open the bootloader.
Also, when I check for updates they don't appear, the updater tells me to look when I'm connected to the Internet but obviously I am.
So, in this extreme case, what needs to be done? Cry? Xd.
By the way, I bought the tablet in Aliexpress, it is supposed to be a version with the global firmware, I already contacted them but I doubt they will answer xd.
Again excuse my English, I'm using translator.

I could already fix it, thanks for not helping me at all

RGC2597 said:
I could already fix it, thanks for not helping me at all
Click to expand...
Click to collapse
Auto rotate..well all sensors I think are borked on gsi roms

russy23 said:
Auto rotate..well all sensors I think are borked on gsi roms
Click to expand...
Click to collapse
They were not GSI that I installed, they were the official Roms (Global and ZUI)
Although I realized that all the problems I was having was because I idiotically deleted the partition "persist" xd.
After flashing '' 'persist.img' my problems were solved.

RGC2597 said:
They were not GSI that I installed, they were the official Roms (Global and ZUI)
Although I realized that all the problems I was having was because I idiotically deleted the partition "persist" xd.
After flashing '' 'persist.img' my problems were solved.
Click to expand...
Click to collapse
Through twrp or adb..how did you get the persist.img..maybe that's needed for gsi roms then

russy23 said:
Through twrp or adb..how did you get the persist.img..maybe that's needed for gsi roms then
Click to expand...
Click to collapse
I got it from the Global Rom <TB-J706F_S250260_210804_ROW>
Later it was only a matter of flashing with <fastboot flash persist persist.img> with the bootloader unlocked and that's it.
Sensors back to life.
Although since I'm not installing GSI, I can't say if it works or not, and I don't want to break my tablet again xd