Related
Ive downloaded TWRP.img from official site
unlocked BL > fastboot boot twrp.img
i get this error
"failed (remote: 'unknown command')
any ideas?
ive even used the MSM tool to go back to 9.5.3
unlocked BL
rebooted BL and tried "fastboot boot twrp.img" with the same error.
i think if you update to 9.5.8 the bootloader no longer accepts fastboot boot commands.
virtyx said:
Ive downloaded TWRP.img from official site
unlocked BL > fastboot boot twrp.img
i get this error
"failed (remote: 'unknown command')
any ideas?
ive even used the MSM tool to go back to 9.5.3
unlocked BL
rebooted BL and tried "fastboot boot twrp.img" with the same error.
Click to expand...
Click to collapse
9.5.3 does not have that capability, update to 9.5.4
Bradl79 said:
9.5.3 does not have that capability, update to 9.5.4
Click to expand...
Click to collapse
i have updated to 9.5.8 via fastboot same problem
ill try 9.5.7 via local updater.
Confirmed working on 9.5.4.
Not sure about others yet.
virtyx said:
i have updated to 9.5.8 via fastboot same problem
ill try 9.5.7 via local updater.
Click to expand...
Click to collapse
slayerh4x said:
Confirmed working on 9.5.4.
Not sure about others yet.
Click to expand...
Click to collapse
ok works on 9.5.7 via local updater
ill try 9.5.8 i think the fastboot updater breaks this functionality somehow because i fastbooted 9.5.7 and it didnt work earlier. but doing it via local updater works.
virtyx said:
Ive downloaded TWRP.img from official site
unlocked BL > fastboot boot twrp.img
i get this error
"failed (remote: 'unknown command')
any ideas?
ive even used the MSM tool to go back to 9.5.3
unlocked BL
rebooted BL and tried "fastboot boot twrp.img" with the same error.
Click to expand...
Click to collapse
Are you typing in 'twrp.img' or dragging and dropping the actual file into adb?
I tried the command with 9.5.8 and it works well with both CMD and Powershell using minimal ADB files. Looking well, not sure if twrp official is able to boot that way or is meant to be used for just flashing. maybe the one in the guide twrp-3.3.1-29, 30,31 etc-guacamole.img are the ones you should use.
GUGUITOMTG4 said:
I tried the command with 9.5.8 and it works well with both CMD and Powershell using minimal ADB files. Looking well, not sure if twrp official is able to boot that way or is meant to be used for just flashing. maybe the one in the guide twrp-3.3.1-29, 30,31 etc-guacamole.img are the ones you should use.
Click to expand...
Click to collapse
Just tested and I agree. Try the latest Unofficial TWRP
Bradl79 said:
Just tested and I agree. Try the latest Unofficial TWRP
Click to expand...
Click to collapse
Doesn't work if you flash the rom via fastboot for some reason, flashed via local update and it worked
virtyx said:
Doesn't work if you flash the rom via fastboot for some reason, flashed via local update and it worked
Click to expand...
Click to collapse
I think this has something to do with slot A/B. I saw other folks having problems with "fastboot boot" for TWRP not working, until they switched slots.
redpoint73 said:
I think this has something to do with slot A/B. I saw other folks having problems with "fastboot boot" for TWRP not working, until they switched slots.
Click to expand...
Click to collapse
hmm maybe
i just flashed zip in local updater and it worked again.
hi guys , how to flash using local updater ? i have the same case i am new
Guys , I am new here , I had a stuck in fastboot then using msm tool back to 9.5.3 . I re did the unlock and then whenver I tried to install twrp using fastboot , it shows remote : unknown error
How I can install twrp and magisk ?? And update to 10 ?
I need step by step please . Considering I am on 9.5.3 OEM unlocked but I am unable to use fastboot boot option.
flash stock rom using fast boot
new_world_2006 said:
Guys , I am new here , I had a stuck in fastboot then using msm tool back to 9.5.3 . I re did the unlock and then whenver I tried to install twrp using fastboot , it shows remote : unknown error
How I can install twrp and magisk ?? And update to 10 ?
I need step by step please . Considering I am on 9.5.3 OEM unlocked but I am unable to use fastboot boot option.
Click to expand...
Click to collapse
I just got my phone 2 days ago. So I started on 9.5.3 or something. Upgraded to 10 and rooted it by following a guide which is just the usual root method for me but I didn't want to screw anything up.
So I suggest just stay unrooted and upgrade to A10. Then root like normal (fastboot boot twrp, flash twrp zip, flash magisk). That's all I did and I'm having no issues on my phone.
Guys , I am new on Op7 , I had a stuck in fastboot because of unable to use boot command, then using msm tool I went back to 9.5.3 . I re did the unlock and then whenver I tried to install twrp using fastboot , it shows remote : unknown error
How I can install twrp and magisk ?? And update to 10 ?
I need step by step please . Considering I am on 9.5.3 OEM unlocked but I am unable to use fastboot boot option.
U can only install twrp through booted TWRP
also pie and q version of OOS need proper boot.img TWRP from this thread https://forum.xda-developers.com/on...nt/recovery-unofficial-twrp-recovery-t3931322
new_world_2006 said:
Guys , I am new on Op7 , I had a stuck in fastboot because of unable to use boot command, then using msm tool I went back to 9.5.3 . I re did the unlock and then whenver I tried to install twrp using fastboot , it shows remote : unknown error
How I can install twrp and magisk ?? And update to 10 ?
I need step by step please . Considering I am on 9.5.3 OEM unlocked but I am unable to use fastboot boot option.
Click to expand...
Click to collapse
Upgrade to 10, then Root.
blas4me said:
Upgrade to 10, then Root.
Click to expand...
Click to collapse
So how i can root, if i have damaged fastboot boot command?
new_world_2006 said:
So how i can root, if i have damaged fastboot boot command?
Click to expand...
Click to collapse
First thing is to OTA update to anything other than 9.5.3. Seemed to me I remembered when I first got the device (many months ago) somebody mentioned there was a fastboot issue on 9.5.3. So just take whatever OTA is availabe to you. Probably 9.5.13
If you still can't boot the twrp.img after that then try manually changing the active slot in fastboot;
fastboot getvar current-slot *(take note of the current slot this command returns)*
fastboot --set-active= *(=a or =b to change slot to the opposite the first command returned)*
fastboot reboot bootloader
So you should end up with something like this;
fastboot --set-active=a
fastboot reboot bootloader
fastboot boot "C:\Adb\twrp-3.3.1-4-guacamole.img"
new_world_2006 said:
So how i can root, if i have damaged fastboot boot command?
Click to expand...
Click to collapse
Bootloader is not damaged, did you enable usb debugging.
Please read, most of us have been there, and a lot of us are coming from some other OnePlus device. Project treble was discussed a lot on 5T forums. If your bootloader detects custom firmware while locked, it will lock the phone. You can't run fastboot commands because you missed a step somewhere.
Is there any way to get root/custom recovery/custom roms on the A502DL or A501DL? If so, how?
lehmancurtis said:
Use the boot mode tool from here for the a501dl. It definitely is unlockable! You can grab the TWRP.img I compiled for the a501dl from this link.
Click to expand...
Click to collapse
Bump. I found some information, but unfortunately the instructions are not very clear. I assume lehmancurtis means to go to fastboot with the boot mode tool, and then flash the TWRP.img with adb. However, I am not sure if this is the right way to do things and I do not have adb drivers for the A501DL or A502DL.
lmgnsa said:
Bump. I found some information, but unfortunately the instructions are not very clear. I assume lehmancurtis means to go to fastboot with the boot mode tool, and then flash the TWRP.img with adb. However, I am not sure if this is the right way to do things and I do not have adb drivers for the A501DL or A502DL.
Click to expand...
Click to collapse
adb and fastboot include a generic Google driver and the VCOM driver installer for mtk includes what you'll need. Once in fastboot...
Code:
fastboot oem unlock-go
Follow the instructions on your device to unlock the bootloader. Then boot to system and reboot to fastboot with bootmode tool. Once in fastboot...
Code:
fastboot erase recovery
fastboot flash recovery recovery.img
fastboot oem reboot-recovery
Then it should boot to TWRP. Be sure to format data f2fs to remove encryption so you can mount data.
And you will need to install Magisk from recovery to have root and keep. OEM recovery from replacing TWRP.
lehmancurtis said:
adb and fastboot include a generic Google driver and the VCOM driver installer for mtk includes what you'll need. Once in fastboot...
Code:
fastboot oem unlock-go
Follow the instructions on your device to unlock the bootloader. Then boot to system and reboot to fastboot with bootmode tool. Once in fastboot...
Code:
fastboot erase recovery
fastboot flash recovery recovery.img
fastboot own reboot-recovery
Then it should boot to TWRP. Be sure to format data f2fs to remove encryption so you can mount data.
And you will need to install Magisk from recovery to have root and keep. OEM recovery from replacing TWRP.
Click to expand...
Click to collapse
Just to confirm:
To prevent the OEM recovery from replacing TWRP, I have to flash Magisk.
If I flashed a gsi, would this problem still be present?
edit: if I wanted to flash a gsi, would I be able to flash "A" only roms, "AB" only roms, or A/AB roms?
edit2: @lehmancurtis plz help me
@lehmancurtis : How do you get the a502dl into fastboot mode? I have tried everything that I can think of, and nothing works! Thank you for all of your help, m8!
fliproc said:
@lehmancurtis : How do you get the a502dl into fastboot mode? I have tried everything that I can think of, and nothing works! Thank you for all of your help, m8!
Click to expand...
Click to collapse
Use a tool that controls bootmode. Mtk-mode-selector
lehmancurtis said:
Use a tool that controls bootmode. Mtk-mode-selector
Click to expand...
Click to collapse
Please help, it says "waiting port" forever
Thanks for the reply! I tried this tool, along with adb commands, etc., and I just can't even get fastboot. This would be an AWESOME phone, if not for this dumb crap!! The phone I had before this one is a Z717VL, and it sucks as well. They are both Tracfone phones that were given to me by my wife. I think I'll just get a Galaxy S8 or so and just root it instead. All other phones that I had on Verizon in the past have been super easy... just a One-Click-Root. Thanks everyone for your time and help!
lehmancurtis said:
adb and fastboot include a generic Google driver and the VCOM driver installer for mtk includes what you'll need. Once in fastboot...
Code:
fastboot oem unlock-go
Follow the instructions on your device to unlock the bootloader. Then boot to system and reboot to fastboot with bootmode tool. Once in fastboot...
Code:
fastboot erase recovery
fastboot flash recovery recovery.img
fastboot own reboot-recovery
Then it should boot to TWRP. Be sure to format data f2fs to remove encryption so you can mount data.
And you will need to install Magisk from recovery to have root and keep. OEM recovery from replacing TWRP.
Click to expand...
Click to collapse
lehmancurtis said:
Use a tool that controls bootmode. Mtk-mode-selector
Click to expand...
Click to collapse
Are you sure the method you thought of works? The bootmode tool you linked cannot get the A501DL to fastboot mode, it just says "waiting port" forever.
@lehmancurtis I feel like you might be lying about whether or not your method works, as the boot mode tool does not work. @lmgnsa did it work for you?
I got it to work by loading the boot mode tool, selecting fastboot, and plugging the phone in when it is turned off while holding volume down.
Then you can unlock the bootloader.
williamhancock328` said:
I got it to work by loading the boot mode tool, selecting fastboot, and plugging the phone in when it is turned off while holding volume down.
Then you can unlock the bootloader.
Click to expand...
Click to collapse
I cannot get to fastboot even if I follow these steps... @williamhancock328` @lehmancurtis
It still says "waiting port" forever.
Make sure to install the MTK VCOM drivers first, the android drivers from google or samsung will not work!
Mediatek USB VCOM Drivers (all MTK devices).zip | by www.foldertips.com for Utilities
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
I was able to bootloader unlock my Alcatel 3T 8, even being on tmobile using the boot selector tool
mickeybeats said:
Make sure to install the MTK VCOM drivers first, the android drivers from google or samsung will not work!
Mediatek USB VCOM Drivers (all MTK devices).zip | by www.foldertips.com for Utilities
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
I was able to bootloader unlock my Alcatel 3T 8, even being on tmobile using the boot selector tool
Click to expand...
Click to collapse
I have already installed the MTK VCOM drivers multiple times, I don't know why it still doesn't work.
T
lmgnsa said:
Just to confirm:
To prevent the OEM recovery from replacing TWRP, I have to flash Magisk.
If I flashed a gsi, would this problem still be present?
edit: if I wanted to flash a gsi, would I be able to flash "A" only roms, "AB" only roms, or A/AB roms?
edit2: @lehmancurtis plz help me
Click to expand...
Click to collapse
lmgnsa said:
To keep recovery from being replace several files need to be disable (various approaches are effective i.e. removed, replace, or renamed). Magisk usually handles this task, but sometimes there are exceptions. But, you need to address that before flashing gsi's for multiple reason and none are fun to deal with. Yes, this is A only and does not use A/B update method (at least not entirely as a few partitions are making use of the A/B partition labels). I've not been doing much with this particular device since mine was cracked and the usb port messed up when I got it, so nature took its course before I was able to achieve a fully stable custom setup.
Click to expand...
Click to collapse
sj78 said:
I cannot get to fastboot even if I follow these steps... @williamhancock328` @lehmancurtis
It still says "waiting port" forever.
Click to expand...
Click to collapse
It sometime takes a few tries to get the phone and tool to do what its supposed to, but if you get the waiting message start over until the program reboots the device. It will work, it's just not a perfect process.
lmgnsa said:
Just to confirm:
To prevent the OEM recovery from replacing TWRP, I have to flash Magisk.
If I flashed a gsi, would this problem still be present?
edit: if I wanted to flash a gsi, would I be able to flash "A" only roms, "AB" only roms, or A/AB roms?
edit2: @lehmancurtis plz help me
Click to expand...
Click to collapse
You need to modify a few files. It's almost just like the 5059 devices and you can look up the 5041c thread to see what needs edited. Use the fstab.mt6739 from the 5041c.
Here's the tool. I think some of the links to it got messed up. Make sure you turn on developer options and check that oem unlock is ticked as well as adb usb options. Once in fastboot, issue the following
Code:
fastboot oem unlock-go
Follow the instructions on the device. Then boot into system and complete setup so that you can turn on developer options again since your device was just reset. Boot to fastboot once again and issue these.
Code:
fastboot flash recovery ./recovery.img
Code:
fastboot oem reboot-recovery
That should be the custom recovery you just installed. It will be replace on reboot if steps are not taken. I was in the process of working this issue when my beat up a501dl succumbed to its varied and multiple impact injuries. If I can find the time to repair it I will finish where I left off, but in the mean time I will help as much as I can.
Regular drivers are built into the phone but you may need vcom drivers. I'm going to attempt to repair mine enough to reset and flash again. I'll probably have to nav my screen via commands, but I will attempt to capture the process and show you.
I've got a A501DL, I enabled usb debugging and oem unlock, seems like the A501DL in fastboot does not talk with the pc, i've installed so many driver things its crazy butat fastboot when typing fastboot reboot bootloader, it reboots the phone but it skips fastboot and turns on to my home screen, I used volume up and power, I get in fast boot butthe device isnt being detected by windows 10 64 bit. Also in fast boot there is only
reboot system now
wipe data/factory reset
wipe cache partition
power off
im going nut that fastboot isnt working with this device.
As the title says, I have no OS and only have fastboot available.
I unlocked the bootloader and pushed TWRP 3.5.1_10-Nebrassy so that I could root with Magisk.
fastboot boot twrp.img
All went well to that point. Then I tried to flash TWRP.
fastboot flash recovery twrp.img
Then I had no OS. I tried to download the latest stock ROM, 11.2.9.9.LE25DA.
https://www.oneplus.in/support/softwareupgrade/details?code=PM1617074715494
I extracted the payload.bin and successfully flashed the files to fastboot.
https://www.droidwin.com/unbrick-oneplus-9-pro-fastboot-commands/
Then I try to boot into fastbootd to install the other files.
fastboot reboot fastboot
Once in fastbootd, I have to choose a language from (I presume) Mandarin, Cantonese, and English. I choose English.
Then it says "fastbootd" across the top, but the cmd window is unresponsive, "< waiting for any device >"
I have to choose Advanced, or Exit.
I choose Advanced.
I have to choose "Reboot to fastboot," "Reboot to recovery," or "Ver 2.0"
I choose Reboot to fastboot because there is no recovery.
cmd is responsive, but I'm in fastboot, not fastbootd.
I try to flash the remaining files.
fastboot flash abl abl.img
I get the following message from the cmd window.
FAILED: <remote: 'Flashing is not allowed for Critical Partitions'>
fastboot error: error: Command failed
Obviously, because I'm not in fastbootd. Except I can't get a responsive cmd prompt in fastbootd.
I have also tried to flash TWRP again. It does not flash. I can push it over and it will boot up, but the touch screen is not responsive, so I have to hard reset to get back to fastboot.
fastboot boot twrp.img
So, at this point, all I have is fastboot and a bootloop.
Would someone please either direct me to a forum where this has been addressed (that I have obviously missed in my search), or please advise how to proceed? I would very much appreciate whatever guidance anyone can offer.
DoktorNo said:
As the title says, I have no OS and only have fastboot available.
I unlocked the bootloader and pushed TWRP 3.5.1_10-Nebrassy so that I could root with Magisk.
fastboot boot twrp.img
All went well to that point. Then I tried to flash TWRP.
fastboot flash recovery twrp.img
Then I had no OS. I tried to download the latest stock ROM, 11.2.9.9.LE25DA.
https://www.oneplus.in/support/softwareupgrade/details?code=PM1617074715494
I extracted the payload.bin and successfully flashed the files to fastboot.
https://www.droidwin.com/unbrick-oneplus-9-pro-fastboot-commands/
Then I try to boot into fastbootd to install the other files.
fastboot reboot fastboot
Once in fastbootd, I have to choose a language from (I presume) Mandarin, Cantonese, and English. I choose English.
Then it says "fastbootd" across the top, but the cmd window is unresponsive, "< waiting for any device >"
I have to choose Advanced, or Exit.
I choose Advanced.
I have to choose "Reboot to fastboot," "Reboot to recovery," or "Ver 2.0"
I choose Reboot to fastboot because there is no recovery.
cmd is responsive, but I'm in fastboot, not fastbootd.
I try to flash the remaining files.
fastboot flash abl abl.img
I get the following message from the cmd window.
FAILED: <remote: 'Flashing is not allowed for Critical Partitions'>
fastboot error: error: Command failed
Obviously, because I'm not in fastbootd. Except I can't get a responsive cmd prompt in fastbootd.
I have also tried to flash TWRP again. It does not flash. I can push it over and it will boot up, but the touch screen is not responsive, so I have to hard reset to get back to fastboot.
fastboot boot twrp.img
So, at this point, all I have is fastboot and a bootloop.
Would someone please either direct me to a forum where this has been addressed (that I have obviously missed in my search), or please advise how to proceed? I would very much appreciate whatever guidance anyone can offer.
Click to expand...
Click to collapse
Try:
fastboot flashing unlock
then
fastboot flashing unlock_critical
Thank you for the reply.
The device is already unlocked, but I did as you suggested and tried both commands.
For both attempts I got the following message:
FAILED <remote : ' Device already : unlocked!'>
Fastboot: error: Command failed.
@DoktorNo you don't flash twrp that way anymore. You have to boot into twrp, then flash from inside twrp itelf.
So
fastboot boot twrp.img
Then once twrp starts up, go to the advanced tab, and flash the recovery.
mx597turbo said:
@DoktorNo you don't flash twrp that way anymore. You have to boot into twrp, then flash from inside twrp itelf.
So
fastboot boot twrp.img
Then once twrp starts up, go to the advanced tab, and flash the recovery.
Click to expand...
Click to collapse
Great suggestion, except when I boot into twrp, I cannot use the touch screen. So twrp will boot, but it is not responsive. Any thoughts on how to make that work? Then I'd be nearly set.
Does the msm tool not work for you? I have to use the one plus 9 pro in version to restore mine.. And you can try sideloading the ota
XxBigBuckxX said:
Does the msm tool not work for you? I have to use the one plus 9 pro in version to restore mine.. And you can try sideloading the ota
Click to expand...
Click to collapse
I haven't tried it. I'll give it a go when I'm home this evening and post my results.
DoktorNo said:
I haven't tried it. I'll give it a go when I'm home this evening and post my results.
Click to expand...
Click to collapse
Also, are you using the most updated version of twrp for the 9/9 pro? I'm sure you are, but just checking.
mx597turbo said:
Also, are you using the most updated version of twrp for the 9/9 pro? I'm sure you are, but just checking.
Click to expand...
Click to collapse
Great question and worth asking. I used twrp 3.5.1_lemonade-Nebrassy.
3.5.1-lemonadep-Nebrassy
Since there's no OS, there is no interface with the touchscreen, so I can't interact with it in that way. I can sideload twrp but then it's just an image on the screen.
There is a newer one TWRP-3.5.2-lemonadep-Nebrassy. If your unable to use twrp to flash or sideload MSM Tool is pretty simple. Use the original cable and put it EDL mode and run it.
DoktorNo said:
Great suggestion, except when I boot into twrp, I cannot use the touch screen. So twrp will boot, but it is not responsive. Any thoughts on how to make that work? Then I'd be nearly set.
Click to expand...
Click to collapse
Just a thought, as I am unable to test. What if you plugged a usb mouse into the phone using an A to C adapter? May be worth a try, but not sure if twrp has mouse support. I have an adapter somewhere - If I find it, I'll let know know if this works.
mx597turbo said:
Just a thought, as I am unable to test. What if you plugged a usb mouse into the phone using an A to C adapter? May be worth a try, but not sure if twrp has mouse support. I have an adapter somewhere - If I find it, I'll let know know if this works.
Click to expand...
Click to collapse
This works , mouse and keyboard
XxBigBuckxX said:
Does the msm tool not work for you? I have to use the one plus 9 pro in version to restore mine.. And you can try sideloading the ota
Click to expand...
Click to collapse
Msm will not download from the link you provided. GDrive scans the .exe and dll files before download and says there is a virus, so I am only able to download the other half of the files.
XxBigBuckxX said:
There is a newer one TWRP-3.5.2-lemonadep-Nebrassy. If your unable to use twrp to flash or sideload MSM Tool is pretty simple. Use the original cable and put it EDL mode and run it.
Click to expand...
Click to collapse
Got the new twrp. Still no touch screen.
mx597turbo said:
Just a thought, as I am unable to test. What if you plugged a usb mouse into the phone using an A to C adapter? May be worth a try, but not sure if twrp has mouse support. I have an adapter somewhere - If I find it, I'll let know know if this works.
Click to expand...
Click to collapse
I will have to buy an adapter.
Here , that was more of a guide. List of unbrick tools select your proper one from here. If you get errors try the One Plus 9 Pro IN version as that what worked with nothing else for a lot of people including me.
DoktorNo said:
Msm will not download from the link you provided. GDrive scans the .exe and dll files before download and says there is a virus, so I am only able to download the other half of the files.
Click to expand...
Click to collapse
Last thing you will need is the driver, here is the signed Microsoft version.
Power off the phone.
Plug in the USB cable your computer but do not connect the other end to the phone.
I Find it easier to have push start on msm tool at this point
Hold down Volume Up and Volume Down buttons for a few seconds, and plug in the cable while you are continuing to hold them. and it should connect and flash.
XxBigBuckxX said:
Here , that was more of a guide. List of unbrick tools select your proper one from here. If you get errors try the One Plus 9 Pro IN version as that what worked with nothing else for a lot of people including me.
Click to expand...
Click to collapse
Downloading now. I'll try this and report back. Thanks.
DoktorNo said:
Downloading now. I'll try this and report back. Thanks.
Click to expand...
Click to collapse
Okay and you might have to try it power cycle it a few times trying to get into edl mode especially if you do not already have working drivers. But windows update will pull working drivers as well if your not sure how to use a .cab file. There are guides everywhere even video if if you need. I've tested some weird things on the 7t pro McLaren and 9 pro and msm tool has always brought them back.
hj
Hello,
My oneplus 9 boots into fastboot, I can use fastboot on my pc but when I try to flash twrp (fastboot boot twrp.img) it tells me FAILED (command write failed (Unknown error)) I don't know what to do
Fastboot flash recovery is correct process to flash twrp
Simple go to oneplus recovery wipe cache your good to go all user apps removed and data will retains
you can run the MSM Tool also. Or, try and boot into Lineage recovery or TWRP, if fastboot flash recovery doesnt work, just do fastboot boot recovery.img
Venkata Prathap said:
Fastboot flash recovery is correct process to flash twrp
Simple go to oneplus recovery wipe cache your good to go all user apps removed and data will retains
Click to expand...
Click to collapse
It gave the same error
illusiveairforce said:
you can run the MSM Tool also. Or, try and boot into Lineage recovery or TWRP, if fastboot flash recovery doesnt work, just do fastboot boot recovery.img
Click to expand...
Click to collapse
I wanted to install it, but it is hosted on google drive and when downloading it blocked me saying it has viruses. Please send me a mirror.
Also I can't access my phone using fastboot anymore, fastboot devices gives nothing, it however shows up in device manager.
I just put a link on a different thread one sec
ONEPLUS 9 china unbrick
ONEPLUS 9 china unbrick what i must to do to bypass model id and flash device
forum.xda-developers.com
Password: cn1d
illusiveairforce said:
ONEPLUS 9 china unbrick
ONEPLUS 9 china unbrick what i must to do to bypass model id and flash device
forum.xda-developers.com
Password: cn1d
Click to expand...
Click to collapse
Isn't that only for the China version? Mine is eu
fastboot works again, it was a driver issue. doing
fastboot boot twrp.img : FAILED (remote: 'Failed to load/authenticate boot image: Load Error')
fastboot flash recovery twrp.img : FAILED (remote: '(recovery_a) No such partition')
illusiveairforce said:
ONEPLUS 9 china unbrick
ONEPLUS 9 china unbrick what i must to do to bypass model id and flash device
forum.xda-developers.com
Password: cn1d
Click to expand...
Click to collapse
Using this, after 6s it said an error talking about O2 (don't remember exactly) and now it says sahara communicatino failed.
It says "Unsupported target O2".
If your partition system is dead (slot A not found when booting on recovery), only MSM tool can help you at this stage. But for OP9 this is a pain in ass to use it; I never used it before but there is multiple topic for using the right version, and as I read it can pass by MSM for pro version first before returning to non pro
I let my phone charge this night as it had no battery, and now It just does nothing, doesn't get into fastboot, when plugged to pc it says USB device not recognized, and pressing volume up + volume down doesn't get the phone into EDL.
akboy7015 said:
If your partition system is dead (slot A not found when booting on recovery), only MSM tool can help you at this stage. But for OP9 this is a pain in ass to use it; I never used it before but there is multiple topic for using the right version, and as I read it can pass by MSM for pro version first before returning to non pro
Click to expand...
Click to collapse
Okay got myself back into EDL. Using the oneplus 9 pro MSM tool from there https://forum.xda-developers.com/t/op9pro-repository-of-msm-unbrick-tools-tmo-eu-glo-in.4272549/
It said "Device not match image"
After trying 5 differennt MSM Tool one of them worked and my phone is back to stock. Thank you all !
magalie78 said:
After trying 5 differennt MSM Tool one of them worked and my phone is back to stock. Thank you all !
Click to expand...
Click to collapse
Witch one ? It could be useful for someone else