Help needed: Minami A20 tablet stuck on boot - General Questions and Answers

Help needed: Minami A20 tablet stuck on boot - General Questions and Answers

Hi, I'm running linux on my laptop, Xubuntu 16.04 64bit and have newest Android SDK, android tools and fastboot installed I also have Qtadb. I have a second SSD with windows 7 Pro 64bit.
For the last 2 months on and off I have tried to revive my old Minami A20 tablet that is stuck on logo. From recovery I can factory reset it and wipe data cache, but no matter how many times I try it is still stuck on logo.
Btw, it came rooted from the factory, but su had to be re-installed, I later made su system file.
busybox is installed too I just don't know which version after all the factory reset.
I did enable usb debug when the tablet was working, but don't know if that is still enabled after factory reset.
I have a full Uberizer firmware backup rom dump but I can't get it recognized in Windows 7 Pro 64bit as other than Alcatel ADB interface and that is not enough for Uberizer to recognize it, I have tried all sorts of usb drivers from Alwinner stock to Google to alcatel and even some generic ones, Also tried the Composite drivers and going to recovery on the tablet to see if that would help.
Uberizer for Windows firmware backup(I can run Uberizer in Wine but it does not have access to the tablet), (There is no working Uberizer for linux), the files are:
boot.img
bootloader.img
data.img
recovery.img
system.img
My problems are the following:
I can't get it recognized correctly in windows due to stuck on logo and incorrect usb drivers / linux(here i can browse some folders but not all and QtADB is not recognizing the tablet correctly nor do ADB from terminal only serial number).
I can't seem to find the correct firmware for this model.
In stock recovery windows 7 recognizes this as Alcatel ADB interface, Uberizer can't see anything.
In stock recovery on the top of everything else it reads:
SDK : MID-A20-Android4.2-V1.3
Android system recovery <3e>
Volume up/down to move highlight;
enter button to select (The interface is touch based scrolling and
Power is enter, the tablet only have Power and Home button, no volume buttons)
The options are:
- reboot system now
- apply update from ADB (also known as sideload)
- wipe data/factory reset
- wipe cache partition
- apply update from internal storage
- apply update from cache
Some research seem to indicate that this is part of the multiple devices called K70 or A70X or A70XH
Ok, I'm not a shark on how to do this so need some guidance, could someone help me out?
adb can show me files by adb ls / but some folders are not opening like:
/vendor
/etc
/system
/init
The rest open:
/config
/cache
/acct
/d
/sdcard
/mnt
/sys
/sbin
/proc
/data
/root
/dev
Funny thing is that Qtadb shows all partitions as empty and can't find any files. I tried Mydroid but that one doesn't even find the device.
adb can find the device and list it as
adb devices
List of devices attached
20080411 device
Qtadb logcat shows:
10:57:42.693 exec '/system/bin/sh' failed: No such file or directory 2 2) -
Hope someone can help me out - thank you
Jan
adb ls /.*.*
000041ed 00000000 5e6ee094 .
000041ed 00000000 5e6ee094 ..
00004140 00000000 5e6ee093 config
000041f8 00000000 5e6ee094 cache
000041ed 00000000 5e6ee093 acct
0000a1ff 0000000e 5e6ee093 vendor
0000a1ff 00000011 5e6ee093 d
0000a1ff 0000000b 5e6ee093 etc
0000a1ff 0000000b 5e6ee093 sdcard
000041fd 00000000 5e6ee093 mnt
000081a4 0004c3ae 00000000 zet622x.ko
000081a4 000003ec 00000000 ueventd.sun7i.rc
000081a4 00000fb8 00000000 ueventd.rc
000081a4 00000110 00000000 ueventd.goldfish.rc
000041ed 00001000 576be140 system
000041ed 00000000 5e6ee093 sys
000081a4 000248d4 00000000 ssd253x-ts.ko
000081a4 00028660 00000000 sis925x.ko
000041e8 00000000 00000000 sbin
0000416d 00000000 00000000 proc
000081a4 0009f1fd 00000000 nand.ko
000081a4 0003c142 00000000 lcd.ko
000081e8 00258000 00000000 initlogo.rle
000081e8 00000f4b 00000000 init.usb.rc
000081e8 00000703 00000000 init.trace.rc
000081e8 00000d75 00000000 init.sun7i.usb.rc
000081e8 00001746 00000000 init.sun7i.rc
000081e8 00004f9b 00000000 init.rc
000081e8 000009b7 00000000 init.goldfish.rc
000081e8 0001bc68 00000000 init
000081a4 00006ef3 00000000 inet_ctp.ko
000081a4 00075788 00000000 hdmi.ko
000081a4 00020cc1 00000000 gt9xx.ko
000081a4 00020874 00000000 gt82x.ko
000081a4 000215a2 00000000 gt801_2plus1.ko
000081a4 00078435 00000000 gslX680new.ko
000081a4 000d5ee3 00000000 gslX680.ko
000081a4 00050f85 00000000 ft5x06_ts.ko
000081a4 00046dcb 00000000 ft5x02.ko
000081a4 0007699b 00000000 ft5402.ko
000081a4 00351e78 00000000 disp.ko
000081a4 00000074 00000000 default.prop
000041f9 00000000 5e6ee094 data
000081a4 0002a66f 00000000 ct36x_ts.ko
000081a4 00020655 00000000 byd693x-ts.ko
000041c0 00000000 52189ece root
000041ed 00000c30 5e6ee094 dev

January now and no reply, look I know its an old tablet but I want to give to the kids here and for that it should work Also I can't seem to find the info online so a tutorial here would solve this problem for many others than me: )

Related

[DEV]ICS SDK Folio 100 Port

SPECIAL THANKS GOES TO DEXTER AND DERARTEM BECAUSE MAIN ROM BASE IS DEXTER'S HONEYCOMB ROM AS WELL AS SOME FILES FROM FOLIOMOD AND CYANOGEMOD
Other communities have their ICS thread and our should have it
I've been trying to port ICS SDK to Folio 100 but logcat just turn off without any message and when I try to execute some commands from adb shell I get 'segmetation fault' and tablet reboots itself. It's something with boot.img. I'll upload ramdisk from kernel that I am using in port.
Can't upload on Github because on last step it wants password that I don't know. It should be letters and numbers from id_rsa file, right? Anyway, here is recovery flashable package:
Recovery package ==> Tried several times to upload but every uploading is followed by some error
Ramdisk ==> ICS_boot.img(just added lines from Siulmagic ICS porting guide)
First mission: Gettin' to adb to be able to use logcat :::: cleared ::::
Possible fix: Try to get any log like this from fastboot with this:
Code:
fastboot -c "root=/dev/mmcblk3p1 rootdelay=15 rw [email protected] [email protected] vmalloc=192M video=tegrafb console=tty0,115200n8 fbcon=rotate:1 fbcon=font:VGA8x8 usbcore.old_scheme_first=1 debug" boot ICS_boot.img
Consequences: Debug log says that partition table can't be find and that it will reboot for 10sec but after that it show |r4:ffffff| and nothing.
Problem might be that data/cache/system partition is ext4 but it shouldn't be problem.
EDIT: I got a log thanks to Kervala
You got a segmentation fault, because your bionic lib is not compiled with Tegra 2 Errata 657451.
You could try to use bionic (libc.so, libdl.so, libm.so, libstdc++.so, libthread_db.so, linker) from a Tegra 2 ROM.
I had the same problem when trying to run AOSP on Folio 100
Click to expand...
Click to collapse
Now I have to change some lib files due to installd error.
Log file from logcat ==> logcat.txt
Second mission: Find solution for:
could not load needed library 'libcutils.so' for '[any command]' (reloc_library[1315]: cannot locate '__system_property_set'...
)CANNOT LINK EXECUTABLE
Click to expand...
Click to collapse
:::: cleared ::::
Might permission have to be changed? Libcutils.so is already included.
EDIT: Changed with one from Honeycomb
Mission three: AKMD service is started and nothing...
I/AKMD2 ( 2141): AK8975/B for Android v 2.0.0.---- (Library: v1.2.0.1217) started.
Click to expand...
Click to collapse
EDIT: If I kill it or delete it from init.rc I get same for debbugerd:
I/DEBUG ( 2136): debuggerd: Oct 12 2011 12:38:31
Click to expand...
Click to collapse
EDIT2: I'll try to change all *utils.so files because they're probably linked with kernel.
EDIT3: With some commands I get error:
reloc_library[1315] cannot locate '[something different from command to command]'...)CANNOT LINK EXECUTABLE
Click to expand...
Click to collapse
as well as this:
link_image[1966]: could not load needed library'[some library]'
Click to expand...
Click to collapse
EDIT4: Only for linker I get 'segmetation fault' and logcat log:
F/libc ( 2223): Fatal signal 11 (SIGSEGV) at 0xffffff60 (code=1)
I/DEBUG ( 2129): *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
I/DEBUG ( 2129): Build fingerprint: 'google/yakju/maguro:4.0.1/ICL23D/212031:userdebug/dev-keys'
I/DEBUG ( 2129): pid: 2223, tid: 2223 >>> linker <<<
I/DEBUG ( 2129): signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault addr ffffff60
I/DEBUG ( 2129): r0 70000001 r1 ffffff60 r2 00000005 r3 00000004
I/DEBUG ( 2129): r4 b0009f60 r5 b00094f0 r6 00000001 r7 be906c08
I/DEBUG ( 2129): r8 b0009910 r9 00000000 10 00000000 fp b0006f17
I/DEBUG ( 2129): ip 00000000 sp be906bc8 lr b00049fd pc b000419e cpsr 20000030
I/DEBUG ( 2129): d0 0000000000000000 d1 0000000000000000
I/DEBUG ( 2129): d2 0000000000000000 d3 0000000000000000
I/DEBUG ( 2129): d4 0000000000000000 d5 0000000000000000
I/DEBUG ( 2129): d6 0000000000000000 d7 0000000000000000
I/DEBUG ( 2129): d8 0000000000000000 d9 0000000000000000
I/DEBUG ( 2129): d10 0000000000000000 d11 0000000000000000
I/DEBUG ( 2129): d12 0000000000000000 d13 0000000000000000
I/DEBUG ( 2129): d14 0000000000000000 d15 0000000000000000
I/DEBUG ( 2129): scr 00000000
I/DEBUG ( 2129):
I/DEBUG ( 2129): #00 pc b000419e /system/bin/linker
I/DEBUG ( 2129): #01 lr b00049fd /system/bin/linker
I/DEBUG ( 2129):
I/DEBUG ( 2129): code around pc:
I/DEBUG ( 2129): b000417c 4ff0e92d 30a8f8d0 f8d04604 f8d01080
I/DEBUG ( 2129): b000418c 07582084 d558b087 f8c42000 48a10090
I/DEBUG ( 2129): b000419c 680be051 d1064283 f8c4688b 694b30f8
I/DEBUG ( 2129): b00041ac f8c408db 680b30fc d1242b01 688b694d
I/DEBUG ( 2129): b00041bc f8d418eb 42ab5090 f8c4bf88 698b3090
I/DEBUG ( 2129):
I/DEBUG ( 2129): code around lr:
I/DEBUG ( 2129): b00049dc 21fef89e 4b35b11a 447b3f01 4b34e001
I/DEBUG ( 2129): b00049ec 2100447b 1027f843 21004620 fbc0f7ff
I/DEBUG ( 2129): b00049fc 4930b1d0 0b04f10d 22184d2f 46584479
I/DEBUG ( 2129): b0004a0c f7fc447d 4628ec02 e93cf001 46024629
I/DEBUG ( 2129): b0004a1c f7fc2002 2002eb4c 22184659 eb46f7fc
I/DEBUG ( 2129):
I/DEBUG ( 2129): stack:
I/DEBUG ( 2129): be906b88 00000000
I/DEBUG ( 2129): be906b8c 00000000
I/DEBUG ( 2129): be906b90 00000000
I/DEBUG ( 2129): be906b94 00000000
I/DEBUG ( 2129): be906b98 00000000
I/DEBUG ( 2129): be906b9c 00000000
I/DEBUG ( 2129): be906ba0 00000000
I/DEBUG ( 2129): be906ba4 00000000
I/DEBUG ( 2129): be906ba8 00000000
I/DEBUG ( 2129): be906bac 00000000
I/DEBUG ( 2129): be906bb0 00000000
I/DEBUG ( 2129): be906bb4 00000000
I/DEBUG ( 2129): be906bb8 00000000
I/DEBUG ( 2129): be906bbc 00000000
I/DEBUG ( 2129): be906bc0 df0027ad
I/DEBUG ( 2129): be906bc4 00000000
I/DEBUG ( 2129): #00 be906bc8 00000000
I/DEBUG ( 2129): be906bcc 00000000
I/DEBUG ( 2129): be906bd0 b0009f60
I/DEBUG ( 2129): be906bd4 b0009f60
I/DEBUG ( 2129): be906bd8 be906d52
I/DEBUG ( 2129): be906bdc 00000118
I/DEBUG ( 2129): be906be0 b0009f60
I/DEBUG ( 2129): be906be4 b0009f60
I/DEBUG ( 2129): be906be8 b00094f0
I/DEBUG ( 2129): be906bec 00000001
I/DEBUG ( 2129): be906bf0 be906c08
I/DEBUG ( 2129): be906bf4 b0009910
I/DEBUG ( 2129): be906bf8 00000000
I/DEBUG ( 2129): be906bfc 00000000
I/DEBUG ( 2129): be906c00 b0006f17 /system/bin/linker
I/DEBUG ( 2129): be906c04 b00049fd /system/bin/linker
I/DEBUG ( 2129): be906c08 00000000
I/DEBUG ( 2129): be906c0c 00000000
Click to expand...
Click to collapse
Tried from CM7, HC and FM with no luck and also deleted linker from /sbin.
EDIT5:I found list of prelinked library files here. I'll change all core library files but I have logcat that says what library files are wrong:
0xC0000000 - 0xFFFFFFFF Kernel
0xB0100000 - 0xBFFFFFFF Thread 0 Stack
0xB0000000 - 0xB00FFFFF Linker
0xA0000000 - 0xBFFFFFFF Prelinked System Libraries
0x90000000 - 0x9FFFFFFF Prelinked App Libraries
0x80000000 - 0x8FFFFFFF Non-prelinked Libraries
0x40000000 - 0x7FFFFFFF mmap'd stuff
0x10000000 - 0x3FFFFFFF Thread Stacks
0x00000000 - 0x0FFFFFFF .text / .data / heap
Click to expand...
Click to collapse
and it says that it is libc.so(red). Also says that problem is in kernel(green) too :
F/libc ( 3491): Fatal signal 11 (SIGSEGV) at 0xffffff60 (code=1)
Click to expand...
Click to collapse
EDIT6: Try with CM7 as a base but I get:
exec '/system/bin/sh' failed: No such file or directory (2)
Click to expand...
Click to collapse
Included sh in bin directory(had that error in with HC too but I forgot what I did)
EDIT7: Problem might be that partitions are ext4 as well as images. I didin't set that in init.rc :::: cleared ::::
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I'm beginner that have been trying to port some roms to Folio and I learned something from that. Bin and lib files were the biggest problem for me till 2 days ago. I realized that ALL have some connections. Kernel is booting system with some files from bin folder that can be checked in init.rc inside ramdisk from system partition that are controlling system via lib files that exchange information with kernel that have hardware drivers. I looked into SDK dump and Nexus Galaxy dump and found that have to be changed with files from ICS(checked in other ICS ports just in case). Tegra board have some special files that have to be included too. There are other files that I don't know what is their main function and also some executable files that are same on every rom.
In xbin folder I added all files from SDK dump and all exutable files from CyanogenMod dump.
Just copied all apps from Galaxy Nexus although I know that some of them might not work because GN is hdpi and Folio is mdpi device and SDK apps aren't odexed. I only changed SystemUI.apk by adding mdpi folders from SDK dump SystemUI.apk.
I changed whole media folder as well as fonts and just changed resolution in bootanimation.
In framework folder I deleted apache-xml.jar file because I don't know what that do and added mdpi files to framework-res.apk just like in SystemUI.apk because I used NG files that are odexed and it's hdmi.
In etc I didn't do anything special-just added some files.
I used FolioMod files for usr folder and added some new files from NG dump-keymapping for external devices like game pads and bluetooth keybord but don't have drivers in kernel
In vendor I leave only some files from face detection.
I finished lib directory quickly because I was tired, just changed graphics, sensors, bluetooth and tegra files.
Leave tts folder, added all executable files CM7 xbin folder and added other files from SDK dump.
That's it! If you have some suggests or solution for some problem from OP post it here please!!!

Great Jon! Good to see a WIP for our own ICS port I think as everywhere said it would be easier to port an ICS Rom to our Folio when the Source is released. Porting SDK is the hard way if i read right?! But if i can do anything to get this further i'm willing to be your guinea pig .

It's easier than porting source code for someone like me that don't know java and C language.

I don't know things like Java and C too but how can i help porting? I don't think it's easy as pushing a file from one place to another or set a value from 0 to 1 isn't it? So what is needed get adb running?
For my understanding can we use the kernel from cm7 which DerArtem made or is it to different from the needed one for ICS? I wanted to learn/help more but all tutorials i've found are not very useful cause they need knowledge of linux which i don't have much. All i tested were distributions like ubuntu, suse etc. and for these i could search for drivers on Google . Do you have any links/Literature oder know how/where to lern more about linux, android and helping develop?

It is that simple-just pushing files. You can't do anything else with bin and lib files that are main. But you have to know what every file do. I wrote small guide that may be helpfull

How to make ext 2 system.img? With what command?

You got a segmentation fault, because your bionic lib is not compiled with Tegra 2 Errata 657451.
You could try to use bionic (libc.so, libdl.so, libm.so, libstdc++.so, libthread_db.so, linker) from a Tegra 2 ROM.
I had the same problem when trying to run AOSP on Folio 100

ok, thanks

Awsome!!! It works!!!

Jon2555 said:
Awsome!!! It works!!!
Click to expand...
Click to collapse
Well done, good to know

Source is out ;-)
https://groups.google.com/forum/#!msg/android-building/T4XZJCZnqF8/WkWhGUYb4MAJ

But it isn't full yet, just dev build. Full will be released after releasing Galaxy Nexus and one more thing:
I don't have skills in porting AOSP-source code.

No one have solution for exec error. I think that kernel can't boot system-can't find system.img. Probbably partitions error. I reformat them for HC but GB wants yaffs2 partitions. How to reformat them? I'll try to make flashable package that contains yaffs2 command that will reformat them. Just like ext4 package in HC 0.4 thread.
Sent from my IDEOS S7 Slim using XDA App

Where to find yaffs2 android compatible command?

Jon2555 said:
No one have solution for exec error. I think that kernel can't boot system-can't find system.img. Probbably partitions error. I reformat them for HC but GB wants yaffs2 partitions. How to reformat them? I'll try to make flashable package that contains yaffs2 command that will reformat them. Just like ext4 package in HC 0.4 thread.
Sent from my IDEOS S7 Slim using XDA App
Click to expand...
Click to collapse
Do you can format using CWM from CM7? i think that this can format in yaffs2 fs.

I'll try, thanks.

I'll try too since jon told that it could be as easy as pushing files around i try to get this running The CWM from CM7 is the 3.0.0.5 or another version?

I think that version is the lastest.
NOTE: Use GB as a source because libc and other prelinked commands probbably are based on GB one and try to learn what every command and so file do.
Sent from my IDEOS S7 Slim using XDA App

So,how does it look?
I realy need it,please!
Can i help with something?

Linker error-gave up from SDK
Fighting with AOSP source code-it isn't that bad, some errors but I generally get help from other, more experienced devs. If you're a dev, you can help.
At the moment I'm stuck with this:
Invalid -march= option: `armv7-a'
Click to expand...
Click to collapse
I don't think that it's cpu architecture error because I get same when I try to compile for PandaBoard.

[Q] Android rot, gemilins, kernel segfaults etc...

Hi, I have a transformer infinity, rooted (via copy su over debug) and bootloader unlocked, but running stock kernel plus one update jelly bean (I've never installed any new kernel etc..)
The only reason I updated to jellybean was because apps kept crashing due to a memory allocation error with opengl, a known fault on the transformer. other than that things seemed pretty fast and stable, even if multitasking was non existant.
anyhow, now around 700-800mb of memory is used at startup, background apps get closed even if there is still free memory and usually only if switching between one or two apps and doing very little, the touch screen has stoped responsing (even though evtest on the correct /dev/input (event3) shows that the input device is actually working, when I copy and paste into the browser 99% of the time it pastes at the begning of the text box not the cursor position, frequent pauses, the launcher (homescreen etc..) seem to do nothing for ages (tens of seconds0, even though it's using loads of ram (presumably for caching the graphics... or just for a laugh), staart up time is well over a minute (longer than my wildfire phone from years ago) and I'm getting segfaults fro time to time: wtf is going on, I'm thinkig of wiping and just runniing gnu/linux on the device as android is seriously borked and the few feature rich apps that are on android, well, I'll just have to use my phone for that, at least I get pro apps on gnu/linux not very poor substitutes, if you could even call them that... that's a short list, including the 'mysterious' transformer screen crack that happened overnight with no one around, anyhow here's the segv (yes I had to cut and paste what I'd written so it came in above the segv I'd cut and pasted).
[ [114440.417747] [VIB]: vibrator_enable: 40
[114440.639822] cpu_up(1)+
[114440.647251] CPU1: Booted secondary processor
[114440.649618] Switched to NOHz mode on CPU #1
[114440.652067] tegra_cpu_init : emc_clk->min_rate to 204M
[114440.652283] cpu_up(1)-
[114440.739873] cpu_up(2)+
[114440.743553] CPU2: Booted secondary processor
[114440.744427] tegra_cpu_init : emc_clk->min_rate to 204M
[114440.744869] cpu_up(2)-
[114440.749407] Switched to NOHz mode on CPU #2
[114441.639826] cpu_up(3)+
[114441.644556] CPU3: Booted secondary processor
[114441.645097] tegra_cpu_init : emc_clk->min_rate to 204M
[114441.645415] cpu_up(3)-
[114441.649444] Switched to NOHz mode on CPU #3
[114443.639911] cpu_down(1)+
[114443.642338] CPU1: shutdown
[114443.644451] cpu_down(1)-
[114443.749829] Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP
[114443.750090] Modules linked in: bcmdhd cfg80211 texfat(P) tntfs(P)
[114443.750829] CPU: 0 Tainted: P W (3.1.10-00001-gdc9b6cf #1)
[114443.751070] PC is at 0xc0b1d00c
[114443.751215] LR is at call_timer_fn+0x50/0x190
[114443.751460] pc : [<c0b1d00c>] lr : [<c00835e0>] psr: 60000113
[114443.751470] sp : c0a31dc0 ip : c0a31dc0 fp : c0a31dfc
[114443.751828] r10: c1711060 r9 : c0b1cb7c r8 : c0a30000
[114443.751965] r7 : c0a32080 r6 : c0b1cb6c r5 : 00000102 r4 : c0a30000
[114443.752205] r3 : c0b1cb7c r2 : 00000000 r1 : c0b1cb7c r0 : c0b1cb7c
[114443.752345] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
[114443.752584] Control: 10c5387d Table: 9749004a DAC: 00000015
[114443.752820]
[114443.752825] PC: 0xc0b1cf8c:
[114443.753066] cf8c c0b1cf8c c0b1cf8c c0b1cf94 c0b1cf94 c0b1cf9c c0b1cf9c c0b1cfa4 c0b1cfa4
[114443.754355] cfac c0b1cfac c0b1cfac c0b1cfb4 c0b1cfb4 c0b1cfbc c0b1cfbc c0b1cfc4 c0b1cfc4
[114443.755543] cfcc c0b1cfcc c0b1cfcc c0b1cfd4 c0b1cfd4 c0b1cfdc c0b1cfdc c0b1cfe4 c0b1cfe4
[114443.756862] cfec c0b1cfec c0b1cfec c0b1cff4 c0b1cff4 c0b1cffc c0b1cffc c0b1d004 c0b1d004
[114443.758176] d00c d6c91d30 d6c91d30 c0b1d014 c0b1d014 c0b1d01c c0b1d01c c0b1d024 c0b1d024
[114443.759483] d02c c0b1d02c c0b1d02c c0b1d034 c0b1d034 c0b1d03c c0b1d03c c0b1d044 c0b1d044
[114443.760691] d04c c0b1d04c c0b1d04c c0b1d054 c0b1d054 c0b1d05c c0b1d05c c0b1d064 c0b1d064
[114443.762004] d06c c0b1d06c c0b1d06c c0b1d074 c0b1d074 c0b1d07c c0b1d07c c0b1d084 c0b1d084
[114443.763317]
[114443.763322] LR: 0xc0083560:
[114443.763566] 3560 e592e00c e0010193 e24b0014 e3a03002 e3a02001 e58e3000 e3a03000 e50bc014
[114443.764870] 3580 e50b3010 eb196054 e24bd00c e89da800 e1a0c00d e92ddff0 e24cb004 e24dd014
[114443.766185] 35a0 e92d4000 e8bd4000 e59f3160 e1a09002 e1a0c00d e3cc4d7f e1a06000 e5932018
[114443.767391] 35c0 e3c4403f e50b1030 e3520000 e5945004 1a000035 e51b3030 e1a00009 e12fff33
[114443.768698] 35e0 e59f3128 e593202c e3520000 1a000014 e5943004 e1530005 0a000004 e59f6110
[114443.770011] 3600 e5563fb7 e3530001 1a000002 e5845004 e24bd028 e89daff0 e58d5000 e3a01e43
[114443.771287] 3620 e594c004 e51b3030 e59f00e8 e59f20e8 e58dc004 ebffc523 e3a03001 e5463fb7
[114443.772498] 3640 eafffff1 e5942004 e2822001 e5842004 e5938038 e3580000 0a00000b e5983000
[114443.773816]
[114443.773821] SP: 0xc0a31d40:
[114443.774061] 1d40 00cfd000 a560e39a 18109375 0000021b c0a31dbc c0a31d60 c0b1d010 60000113
[114443.775365] 1d60 c000f094 00000000 c0a31dfc c0a31d78 c000edc8 c00081a8 c0b1cb7c c0b1cb7c
[114443.776666] 1d80 00000000 c0b1cb7c c0a30000 00000102 c0b1cb6c c0a32080 c0a30000 c0b1cb7c
[114443.777973] 1da0 c1711060 c0a31dfc c0a31dc0 c0a31dc0 c00835e0 c0b1d00c 60000113 ffffffff
[114443.779175] 1dc0 2c1bea79 c00a6608 c0a31e20 c0b1cb7c c0a31dec c0a31e20 c0b1c820 c0b1cb6c
[114443.780483] 1de0 c0a32080 c0a30000 00ce5000 c1711060 c0a31e54 c0a31e00 c0084348 c008359c
[114443.781792] 1e00 c0b1cb90 00000000 02789879 c0a31e20 c0b1cb7c c0b1cb7c 00200200 c0b1d034
[114443.783091] 1e20 e63923f4 e61215f4 c0a31e54 00000101 c0a32044 c0a30000 00000000 00000001
[114443.784285]
[114443.784290] IP: 0xc0a31d40:
[114443.784639] 1d40 00cfd000 a560e39a 18109375 0000021b c0a31dbc c0a31d60 c0b1d010 60000113
[114443.785845] 1d60 c000f094 00000000 c0a31dfc c0a31d78 c000edc8 c00081a8 c0b1cb7c c0b1cb7c
[114443.787143] 1d80 00000000 c0b1cb7c c0a30000 00000102 c0b1cb6c c0a32080 c0a30000 c0b1cb7c
[114443.788425] 1da0 c1711060 c0a31dfc c0a31dc0 c0a31dc0 c00835e0 c0b1d00c 60000113 ffffffff
[114443.789746] 1dc0 2c1bea79 c00a6608 c0a31e20 c0b1cb7c c0a31dec c0a31e20 c0b1c820 c0b1cb6c
[114443.790955] 1de0 c0a32080 c0a30000 00ce5000 c1711060 c0a31e54 c0a31e00 c0084348 c008359c
[114443.792263] 1e00 c0b1cb90 00000000 02789879 c0a31e20 c0b1cb7c c0b1cb7c 00200200 c0b1d034
[114443.793567] 1e20 e63923f4 e61215f4 c0a31e54 00000101 c0a32044 c0a30000 00000000 00000001
[114443.794863]
[114443.794868] FP: 0xc0a31d7c:
[114443.795108] 1d7c c0b1cb7c 00000000 c0b1cb7c c0a30000 00000102 c0b1cb6c c0a32080 c0a30000
[114443.796422] 1d9c c0b1cb7c c1711060 c0a31dfc c0a31dc0 c0a31dc0 c00835e0 c0b1d00c 60000113
[114443.797625] 1dbc ffffffff 2c1bea79 c00a6608 c0a31e20 c0b1cb7c c0a31dec c0a31e20 c0b1c820
[114443.798930] 1ddc c0b1cb6c c0a32080 c0a30000 00ce5000 c1711060 c0a31e54 c0a31e00 c0084348
[114443.800228] 1dfc c008359c c0b1cb90 00000000 02789879 c0a31e20 c0b1cb7c c0b1cb7c 00200200
[114443.801530] 1e1c c0b1d034 e63923f4 e61215f4 c0a31e54 00000101 c0a32044 c0a30000 00000000
[114443.802741] 1e3c 00000001 00ce5000 c1711060 c0a31e9c c0a31e58 c007c010 c0084204 027859f9
[114443.803938] 1e5c 00006816 027859f9 0000000a 00000000 00000102 0310c580 c0a30000 c0a53018
[114443.805232]
[114443.805237] R0: 0xc0b1cafc:
[114443.805476] cafc c0b1cafc c0b1cafc c0b1cb04 c0b1cb04 c0b1cb0c c0b1cb0c c0b1cb14 c0b1cb14
[114443.806783] cb1c c0b1cb1c c0b1cb1c c0b1cb24 c0b1cb24 c0b1cb2c c0b1cb2c c0b1cb34 c0b1cb34
[114443.808090] cb3c c0b1cb3c c0b1cb3c c0b1cb44 c0b1cb44 c0b1cb4c c0b1cb4c c0b1cb54 c0b1cb54
[114443.809299] cb5c c0b1cb5c c0b1cb5c c0b1cb64 c0b1cb64 00000000 00200200 e605c558 e605c558
[114443.810610] cb7c c0b1cb7c c0b1cb7c c0b1cb84 c0b1cb84 c0b1cb8c c0b1cb8c c0b1cb94 c0b1cb94
[114443.811809] cb9c c0b1cb9c c0b1cb9c c0b1cba4 c0b1cba4 c0b1cbac c0b1cbac c0b1cbb4 c0b1cbb4
[114443.813103] cbbc c0b1cbbc c0b1cbbc c0b1cbc4 c0b1cbc4 c0b1cbcc c0b1cbcc c0b1cbd4 c0b1cbd4
[114443.814301] cbdc c0b1cbdc c0b1cbdc c0b1cbe4 c0b1cbe4 c0b1cbec c0b1cbec c0b1cbf4 c0b1cbf4
[114443.815612]
[114443.815617] R1: 0xc0b1cafc:
[114443.815862] cafc c0b1cafc c0b1cafc c0b1cb04 c0b1cb04 c0b1cb0c c0b1cb0c c0b1cb14 c0b1cb14
[114443.817172] cb1c c0b1cb1c c0b1cb1c c0b1cb24 c0b1cb24 c0b1cb2c c0b1cb2c c0b1cb34 c0b1cb34
[114443.818484] cb3c c0b1cb3c c0b1cb3c c0b1cb44 c0b1cb44 c0b1cb4c c0b1cb4c c0b1cb54 c0b1cb54
[114443.819689] cb5c c0b1cb5c c0b1cb5c c0b1cb64 c0b1cb64 00000000 00200200 e605c558 e605c558
[114443.820984] cb7c c0b1cb7c c0b1cb7c c0b1cb84 c0b1cb84 c0b1cb8c c0b1cb8c c0b1cb94 c0b1cb94
[114443.822258] cb9c c0b1cb9c c0b1cb9c c0b1cba4 c0b1cba4 c0b1cbac c0b1cbac c0b1cbb4 c0b1cbb4
[114443.823546] cbbc c0b1cbbc c0b1cbbc c0b1cbc4 c0b1cbc4 c0b1cbcc c0b1cbcc c0b1cbd4 c0b1cbd4
[114443.824842] cbdc c0b1cbdc c0b1cbdc c0b1cbe4 c0b1cbe4 c0b1cbec c0b1cbec c0b1cbf4 c0b1cbf4
[114443.826046]
[114443.826051] R3: 0xc0b1cafc:
[114443.826399] cafc c0b1cafc c0b1cafc c0b1cb04 c0b1cb04 c0b1cb0c c0b1cb0c c0b1cb14 c0b1cb14
[114443.827603] cb1c c0b1cb1c c0b1cb1c c0b1cb24 c0b1cb24 c0b1cb2c c0b1cb2c c0b1cb34 c0b1cb34
[114443.828912] cb3c c0b1cb3c c0b1cb3c c0b1cb44 c0b1cb44 c0b1cb4c c0b1cb4c c0b1cb54 c0b1cb54
[114443.830223] cb5c c0b1cb5c c0b1cb5c c0b1cb64 c0b1cb64 00000000 00200200 e605c558 e605c558
[114443.831525] cb7c c0b1cb7c c0b1cb7c c0b1cb84 c0b1cb84 c0b1cb8c c0b1cb8c c0b1cb94 c0b1cb94
[114443.832719] cb9c c0b1cb9c c0b1cb9c c0b1cba4 c0b1cba4 c0b1cbac c0b1cbac c0b1cbb4 c0b1cbb4
[114443.834036] cbbc c0b1cbbc c0b1cbbc c0b1cbc4 c0b1cbc4 c0b1cbcc c0b1cbcc c0b1cbd4 c0b1cbd4
[114443.835355] cbdc c0b1cbdc c0b1cbdc c0b1cbe4 c0b1cbe4 c0b1cbec c0b1cbec c0b1cbf4 c0b1cbf4
[114443.836557]
[114443.836562] R4: 0xc0a2ff80:
[114443.836803] ff80 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[114443.838080] ffa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[114443.839275] ffc0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[114443.840577] ffe0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[114443.841881] 0000 00000002 00000104 00000000 c0a5a598 c0a8fd30 00000000 00000015 c0a5a598
[114443.843177] 0020 c17134c0 e5c9b240 c0a30000 00000000 e6102380 d5ac1140 c0a31f7c c0a31ee0
[114443.844386] 0040 c06d9cec 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[114443.845693] 0060 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[114443.846991]
[114443.846996] R6: 0xc0b1caec:
[114443.847235] caec c0b1caec c0b1caec c0b1caf4 c0b1caf4 c0b1cafc c0b1cafc c0b1cb04 c0b1cb04
[114443.848543] cb0c c0b1cb0c c0b1cb0c c0b1cb14 c0b1cb14 c0b1cb1c c0b1cb1c c0b1cb24 c0b1cb24
[114443.849863] cb2c c0b1cb2c c0b1cb2c c0b1cb34 c0b1cb34 c0b1cb3c c0b1cb3c c0b1cb44 c0b1cb44
[114443.851070] cb4c c0b1cb4c c0b1cb4c c0b1cb54 c0b1cb54 c0b1cb5c c0b1cb5c c0b1cb64 c0b1cb64
[114443.852379] cb6c 00000000 00200200 e605c558 e605c558 c0b1cb7c c0b1cb7c c0b1cb84 c0b1cb84
[114443.853688] cb8c c0b1cb8c c0b1cb8c c0b1cb94 c0b1cb94 c0b1cb9c c0b1cb9c c0b1cba4 c0b1cba4
[114443.854972] cbac c0b1cbac c0b1cbac c0b1cbb4 c0b1cbb4 c0b1cbbc c0b1cbbc c0b1cbc4 c0b1cbc4
[114443.856177] cbcc c0b1cbcc c0b1cbcc c0b1cbd4 c0b1cbd4 c0b1cbdc c0b1cbdc c0b1cbe4 c0b1cbe4
[114443.857495]
[114443.857500] R7: 0xc0a32000:
[114443.857743] 2000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[114443.859047] 2020 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[114443.860347] 2040 c007b700 c00841f8 c0550b28 c05559f4 c0275acc c02762f0 c007b8c0 c006f8ec
[114443.861658] 2060 c009bc9c c00c7214 00000000 00000000 00000000 00000000 00000000 00000000
[114443.862859] 2080 00ae2b71 00000001 00000000 00000000 00000000 00000000 00000000 00000000
[114443.864159] 20a0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[114443.865456] 20c0 014a62ba 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[114443.866760] 20e0 c0a320e0 c0a320e0 00000000 00000000 00000000 00000000 00000000 00000000
[114443.867954]
[114443.867959] R8: 0xc0a2ff80:
[114443.868302] ff80 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[114443.869501] ffa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[114443.870786] ffc0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[114443.872071] ffe0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[114443.873376] 0000 00000002 00000104 00000000 c0a5a598 c0a8fd30 00000000 00000015 c0a5a598
[114443.874580] 0020 c17134c0 e5c9b240 c0a30000 00000000 e6102380 d5ac1140 c0a31f7c c0a31ee0
[114443.875891] 0040 c06d9cec 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[114443.877203] 0060 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[114443.878504]
[114443.878510] R9: 0xc0b1cafc:
[114443.878750] cafc c0b1cafc c0b1cafc c0b1cb04 c0b1cb04 c0b1cb0c c0b1cb0c c0b1cb14 c0b1cb14
[114443.880059] cb1c c0b1cb1c c0b1cb1c c0b1cb24 c0b1cb24 c0b1cb2c c0b1cb2c c0b1cb34 c0b1cb34
[114443.881250] cb3c c0b1cb3c c0b1cb3c c0b1cb44 c0b1cb44 c0b1cb4c c0b1cb4c c0b1cb54 c0b1cb54
[114443.882557] cb5c c0b1cb5c c0b1cb5c c0b1cb64 c0b1cb64 00000000 00200200 e605c558 e605c558
[114443.883762] cb7c c0b1cb7c c0b1cb7c c0b1cb84 c0b1cb84 c0b1cb8c c0b1cb8c c0b1cb94 c0b1cb94
[114443.885076] cb9c c0b1cb9c c0b1cb9c c0b1cba4 c0b1cba4 c0b1cbac c0b1cbac c0b1cbb4 c0b1cbb4
[114443.886295] cbbc c0b1cbbc c0b1cbbc c0b1cbc4 c0b1cbc4 c0b1cbcc c0b1cbcc c0b1cbd4 c0b1cbd4
[114443.887580] cbdc c0b1cbdc c0b1cbdc c0b1cbe4 c0b1cbe4 c0b1cbec c0b1cbec c0b1cbf4 c0b1cbf4
[114443.888871]
[114443.888876] R10: 0xc1710fe0:
[114443.889121] 0fe0 57f9e4b2 85e3a3dc 03486f79 578fdfc2 cb36c3b4 0fb16f75 4e279d4c 511b46be
[114443.890431] 1000 004c0000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[114443.891736] 1020 00000000 00000001 00000000 c0aa8bc8 ef939a40 c1719034 c0aa8bd8 c0aa8be8
[114443.892944] 1040 c0aa8bd8 c0aa8900 ef9369f8 00000003 00000007 c0a5a598 004c0000 00000000
[114443.894261] 1060 c009b940 c001589c 0310c580 00006816 35e50d83 00000004 000003e8 00000000
[114443.895465] 1080 1e666666 0000001f 00000003 00000007 0000072b c0014aac c0015834 0000000f
[114443.896775] 10a0 ffffffff c0855460 0000015e 0000001d c06f68ec c0a92610 c0a5c8b4 00000000
[114443.897984] 10c0 c1711060 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[114443.899304] Process swapper (pid: 0, stack limit = 0xc0a302f0)
[114443.899544] Stack: (0xc0a31dc0 to 0xc0a32000)
[114443.899688] 1dc0: 2c1bea79 c00a6608 c0a31e20 c0b1cb7c c0a31dec c0a31e20 c0b1c820 c0b1cb6c
[114443.899939] 1de0: c0a32080 c0a30000 00ce5000 c1711060 c0a31e54 c0a31e00 c0084348 c008359c
[114443.900190] 1e00: c0b1cb90 00000000 02789879 c0a31e20 c0b1cb7c c0b1cb7c 00200200 c0b1d034
[114443.900335] 1e20: e63923f4 e61215f4 c0a31e54 00000101 c0a32044 c0a30000 00000000 00000001
[114443.900583] 1e40: 00ce5000 c1711060 c0a31e9c c0a31e58 c007c010 c0084204 027859f9 00006816
[114443.900836] 1e60: 027859f9 0000000a 00000000 00000102 0310c580 c0a30000 c0a53018 c0a2ddf8
[114443.900981] 1e80: 00000000 c0a2c060 00ce5000 c1711060 c0a31eb4 c0a31ea0 c007c6d4 c007bf40
[114443.901227] 1ea0: 00000000 c0a30000 c0a31ee4 c0a31eb8 c000838c c007c638 c028ee48 c004c334
[114443.901473] 1ec0: 20000013 fe040100 c0a31f1c e66fe400 412fc099 00000000 c0a31f54 c0a31ee8
[114443.901722] 1ee0: c000ecb8 c0008314 00001a9b 00000000 00000000 000f4240 02104571 00006816
[114443.901867] 1f00: 00000000 e66fe410 e66fe400 412fc099 00000000 c0a31f54 3b9ac9ff c0a31f30
[114443.902114] 1f20: c028ee48 c004c334 20000013 ffffffff 027832e9 00006816 00000000 00001a9b
[114443.902359] 1f40: c0a30000 c0a30000 c0a31f8c c0a31f58 c049a130 c004c2d4 02102631 00006816
[114443.902604] 1f60: c009ce58 c0a30000 c0af4d04 c06f6974 c0a5b7b4 8000406a 412fc099 00000000
[114443.902749] 1f80: c0a31fac c0a31f90 c0010278 c049a058 c0a30000 00000000 c0a07f7c c170e2a0
[114443.902997] 1fa0: c0a31fc4 c0a31fb0 c06ae798 c00101bc c0a0c150 c0a52e2c c0a31ff4 c0a31fc8
[114443.903245] 1fc0: c09d1864 c06ae710 c09d12c4 00000000 00000000 c0a07f7c 10c5387d c0a51650
[114443.903493] 1fe0: c0a07f74 c0a5b7ac 00000000 c0a31ff8 80008040 c09d15a0 00000000 00000000
[114443.903654] [<c00835e0>] (call_timer_fn+0x50/0x190) from [<c0084348>] (run_timer_softirq+0x150/0x2a8)
[114443.903915] [<c0084348>] (run_timer_softirq+0x150/0x2a8) from [<c007c010>] (__do_softirq+0xdc/0x278)
[114443.904168] [<c007c010>] (__do_softirq+0xdc/0x278) from [<c007c6d4>] (irq_exit+0xa8/0xb0)
[114443.904420] [<c007c6d4>] (irq_exit+0xa8/0xb0) from [<c000838c>] (do_local_timer+0x84/0xa4)
[114443.904571] [<c000838c>] (do_local_timer+0x84/0xa4) from [<c000ecb8>] (__irq_svc+0x38/0xd0)
[114443.904806] Exception stack(0xc0a31ee8 to 0xc0a31f30)
[114443.905045] 1ee0: 00001a9b 00000000 00000000 000f4240 02104571 00006816
[114443.905189] 1f00: 00000000 e66fe410 e66fe400 412fc099 00000000 c0a31f54 3b9ac9ff c0a31f30
[114443.905434] 1f20: c028ee48 c004c334 20000013 ffffffff
[114443.905685] [<c000ecb8>] (__irq_svc+0x38/0xd0) from [<c004c334>] (tegra_idle_enter_lp3+0x6c/0x74)
[114443.905847] [<c004c334>] (tegra_idle_enter_lp3+0x6c/0x74) from [<c049a130>] (cpuidle_idle_call+0xe4/0x290)
[114443.906112] [<c049a130>] (cpuidle_idle_call+0xe4/0x290) from [<c0010278>] (cpu_idle+0xc8/0x11c)
[114443.906375] [<c0010278>] (cpu_idle+0xc8/0x11c) from [<c06ae798>] (rest_init+0x94/0xac)
[114443.906641] [<c06ae798>] (rest_init+0x94/0xac) from [<c09d1864>] (start_kernel+0x2d0/0x324)
[114443.906786] Code: c0b1cffc c0b1cffc c0b1d004 c0b1d004 (d6c91d30)
[114443.907123] ---[ end trace e6a0be6a6a3309db ]---
[114443.907263] Kernel panic - not syncing: Fatal exception in interrupt
[114443.907529] [<c0016410>] (unwind_backtrace+0x0/0x144) from [<c06c47e0>] (dump_stack+0x20/0x24)
[114443.907784] [<c06c47e0>] (dump_stack+0x20/0x24) from [<c06c6574>] (panic+0x88/0x1b4)
[114443.907931] [<c06c6574>] (panic+0x88/0x1b4) from [<c001347c>] (die+0xd0/0xe4)
[114443.908184] [<c001347c>] (die+0xd0/0xe4) from [<c00134b8>] (arm_notify_die+0x28/0x60)
[114443.908437] [<c00134b8>] (arm_notify_die+0x28/0x60) from [<c00082e4>] (do_undefinstr+0x148/0x16c)
[114443.908695] [<c00082e4>] (do_undefinstr+0x148/0x16c) from [<c000edc8>] (__und_svc+0x48/0x60)
[114443.908831] Exception stack(0xc0a31d78 to 0xc0a31dc0)
[114443.909067] 1d60: c0b1cb7c c0b1cb7c
[114443.909315] 1d80: 00000000 c0b1cb7c c0a30000 00000102 c0b1cb6c c0a32080 c0a30000 c0b1cb7c
[114443.909458] 1da0: c1711060 c0a31dfc c0a31dc0 c0a31dc0 c00835e0 c0b1d00c 60000113 ffffffff
[114443.909713] [<c000edc8>] (__und_svc+0x48/0x60) from [<c0b1d00c>] (0xc0b1d00c)
[114443.909985] CPU3: stopping
[114443.910149] [<c0016410>] (unwind_backtrace+0x0/0x144) from [<c06c47e0>] (dump_stack+0x20/0x24)
[114443.910403] [<c06c47e0>] (dump_stack+0x20/0x24) from [<c0008590>] (do_IPI+0x1e4/0x218)
[114443.910554] [<c0008590>] (do_IPI+0x1e4/0x218) from [<c000ecb8>] (__irq_svc+0x38/0xd0)
[114443.910797] Exception stack(0xef8d7f18 to 0xef8d7f60)
[114443.910933] 7f00: 0000c404 00000000
[114443.911078] 7f20: 00000000 000f4240 090790e1 00006816 00000000 e67da810 e67da800 412fc099
[114443.911324] 7f40: 00000003 ef8d7f84 3b9ac9ff ef8d7f60 c028ee48 c004c334 20000013 ffffffff
[114443.911578] [<c000ecb8>] (__irq_svc+0x38/0xd0) from [<c004c334>] (tegra_idle_enter_lp3+0x6c/0x74)
[114443.911734] [<c004c334>] (tegra_idle_enter_lp3+0x6c/0x74) from [<c049a130>] (cpuidle_idle_call+0xe4/0x290)
[114443.911890] [<c049a130>] (cpuidle_idle_call+0xe4/0x290) from [<c0010278>] (cpu_idle+0xc8/0x11c)
[114443.912158] [<c0010278>] (cpu_idle+0xc8/0x11c) from [<c06c16c8>] (secondary_start_kernel+0x138/0x158)
[114443.912413] [<c06c16c8>] (secondary_start_kernel+0x138/0x158) from [<806c0fd4>] (0x806c0fd4)
[114443.912663] CPU2: stopping
[114443.912825] [<c0016410>] (unwind_backtrace+0x0/0x144) from [<c06c47e0>] (dump_stack+0x20/0x24)
[114443.913079] [<c06c47e0>] (dump_stack+0x20/0x24) from [<c0008590>] (do_IPI+0x1e4/0x218)
[114443.913232] [<c0008590>] (do_IPI+0x1e4/0x218) from [<c000ecb8>] (__irq_svc+0x38/0xd0)
[114443.913475] Exception stack(0xef8cbf18 to 0xef8cbf60)
[114443.913717] bf00: 0001d570 00000000
[114443.913861] bf20: 00000000 000f4240 04db8301 00006816 00000000 e67dac10 e67dac00 412fc099
[114443.914107] bf40: 00000002 ef8cbf84 3b9ac9ff ef8cbf60 c028ee48 c004c334 20000013 ffffffff
[114443.914359] [<c000ecb8>] (__irq_svc+0x38/0xd0) from [<c004c334>] (tegra_idle_enter_lp3+0x6c/0x74)
[114443.914612] [<c004c334>] (tegra_idle_enter_lp3+0x6c/0x74) from [<c049a130>] (cpuidle_idle_call+0xe4/0x290)
[114443.914764] [<c049a130>] (cpuidle_idle_call+0xe4/0x290) from [<c0010278>] (cpu_idle+0xc8/0x11c)
[114443.915022] [<c0010278>] (cpu_idle+0xc8/0x11c) from [<c06c16c8>] (secondary_start_kernel+0x138/0x158)
[114443.915276] [<c06c16c8>] (secondary_start_kernel+0x138/0x158) from [<806c0fd4>] (0x806c0fd4)
[114443.915528] Rebooting in 10 seconds..
[114453.925853] Restarting Linux version 3.1.10-00001-gdc9b6cf ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Dec 28 19:02:52 CST 2012
[114453.925877]
No errors detected

I should add that there also seems to be some major 2d graphics performance issues, for instance GMIP, over tightvncserver, over xrdp, over and xrdp client is about as laggy as a native android painting app which drawing some simple airbrush lines. using top etc.. the xrdp client is CPU limiting the whole lot, using say, 150% CPU, where as tightvncserver and xrdp are using under 30% each (that should be doing harder graphics processing work) and gimp about 10%

there are also lots of other random bugs, for instance if i have the charger plugged in, from time to time, the black and white image you get when the charger plugs in appears on the screen.. sometimes it seems like external storage unmounts too, sometimes the pointer clickins on the screen when I am typing (though this may be the trackpad being annoyingly over sensitive), filemanager wont open flv files, files don't show up when apps try to open pictures or videos (presumably using some built in android cache) though if I use an app that just looks at the files (like vnc or a filebrowser) the files are there and open just fine.

oliverthered said:
anyhow, now around 700-800mb of memory is used at startup, background apps get closed even if there is still free memory and usually only if switching between one or two apps and doing very little
Click to expand...
Click to collapse
Seems to be typical behavior, unfortunately. Different application types get different kill priorities as far as the lowmemorykiller is concerned. It might just be that it's being a bit aggressive with those apps it thinks it can get away with it on.
when I copy and paste into the browser 99% of the time it pastes at the begning of the text box not the cursor position
Click to expand...
Click to collapse
I think I've had this experience too, although I don't know if as often. Text selection and cursor positioning do seem buggy and unrefined at times.
staart up time is well over a minute (longer than my wildfire phone from years ago)
Click to expand...
Click to collapse
Also typical for this device.
and I'm getting segfaults fro time to time
Click to expand...
Click to collapse
If you're using the stock kernel and getting kernel panics, it might be a hardware issue. CPU overheating or memory gone bad. I wonder if there's a port of, or equivalent to, memtest86 for Android/ARM...
oliverthered said:
there are also lots of other random bugs, for instance if i have the charger plugged in, from time to time, the black and white image you get when the charger plugs in appears on the screen.. sometimes it seems like external storage unmounts too,
Click to expand...
Click to collapse
If you mean the little "toast" message gets stuck on the screen, I get this too. Usually when turning on/off Wi-Fi.
filemanager wont open flv files
Click to expand...
Click to collapse
This has never worked for me either. I don't know offhand if there's a way to associate files with apps using the stock filemanager.

My wildfire seems to do a better job at keeping backgroup processes running and it even happens with 1gb of swap space enabled, I may try to get a kernel with the feature disabled since even something like catlog get's killed if I'm running another process, all too regurlally.
The kernel panicks seem to be all too consistent for a hardware memory issue, I found that if I start up the device then start doing a lot of typing it seems to trip the segfault. I'll capture a few more last_kmsg tails too see how consistant they are.
It's not the toast message getting 'stuck' it's that it keeps popping up from time to time, say every ten minutes or so if I'm watching a movie on hdmi out and doing nothing else with the device plugged into the charger all that time.
becomingx said:
Seems to be typical behavior, unfortunately. Different application types get different kill priorities as far as the lowmemorykiller is concerned. It might just be that it's being a bit aggressive with those apps it thinks it can get away with it on.
If you're using the stock kernel and getting kernel panics, it might be a hardware issue. CPU overheating or memory gone bad. I wonder if there's a port of, or equivalent to, memtest86 for Android/ARM...
If you mean the little "toast" message gets stuck on the screen, I get this too. Usually when turning on/off Wi-Fi.
Click to expand...
Click to collapse

oliverthered said:
My wildfire seems to do a better job at keeping backgroup processes running and it even happens with 1gb of swap space enabled, I may try to get a kernel with the feature disabled since even something like catlog get's killed if I'm running another process, all too regurlally.
Click to expand...
Click to collapse
That would be interesting (I'm assuming you mean the lowmemorykiller as the feature?). I can imagine how the system would act without it.
The kernel panicks seem to be all too consistent for a hardware memory issue, I found that if I start up the device then start doing a lot of typing it seems to trip the segfault. I'll capture a few more last_kmsg tails too see how consistant they are.
Click to expand...
Click to collapse
Hmm, virtual keyboard or hardware keyboard, or does it not matter? Either way, let me know about the faults. I used to be pretty good at reading kernel panics, but I'm a few years out of practice. I'd still like to see what the differences are, if any.
It's not the toast message getting 'stuck' it's that it keeps popping up from time to time, say every ten minutes or so if I'm watching a movie on hdmi out and doing nothing else with the device plugged into the charger all that time.
Click to expand...
Click to collapse
Ah! When the screen got cracked, do you think it might have damaged more than that? Maybe the mainboard or the dock connector?

[Completed] Problem with TR976 tablet - loop boot

Hello everyone,
I have a typical problem - my device does not load, because it loops with android logo. It does that because i edited vold.fstab incorrectly, but have the correct lines copy in comments within the file. Problem is i don't have any idea how to enter recovery mode ( if one exist at all ) on the device! I tried most of popular combinations and nothing worked - the device always start to load normally, and loops. Most solutions to this situation is via abd, but abd does not see the device ( i guess because it's not started/not in recovery mode ).
Is there a way to access root or force the recovery ?
All i can say about the device is that there is mt97002_V4 on the digitalizer and TR976V12 on the board. I could use any help with making this work again.
Edit:
Device is running Android 4.2
ABD see the device as 0123456789ABCDEF
I managed to get the device to recovery mode by holding VOL+ and plugging in power supply.
Device does not have shell command.
I managed to get list of some files on it :
adb.exe ls /
000041ed 00000000 569d35a2 .
000041ed 00000000 569d35a2 ..
000041ed 00000000 569d35a2 cache
000041ed 00000000 569d35a2 mnt
000081a4 00000888 00000000 ueventd.rk30board.rc
000081a4 00000fa7 00000000 ueventd.rc
000081a4 00000110 00000000 ueventd.goldfish.rc
000041fd 00000000 569d35a6 tmp
000041ed 00000000 00000000 system
000041ed 00000000 569d35a2 sys
000041e8 00000000 00000000 sbin
000081a4 00021b50 00000000 rk30xxnand_ko.ko.3.0.8+
000081a4 000242df 00000000 rk30xxnand_ko.ko.3.0.36+
000041ed 00000000 00000000 res
000081a4 000040e2 00000000 readahead_list.txt
0000416d 00000000 00000000 proc
000081e8 00000655 00000000 init.rc
000081e8 0001ab34 00000000 init
000041ed 00000000 00000000 etc
000081a4 00000b12 00000000 default.prop
000041ed 00000000 569d35c5 data
000081e8 0003a930 00000000 charger
000081a4 00000c17 00000000 at18.ko
000041c0 00000000 503c74fb root
000041ed 000009c4 569d35a6 dev
adb.exe ls /system
000041ed 00000000 00000000 .
000041ed 00000000 569d35a2 ..
adb.exe ls /etc
000041ed 00000000 00000000 .
000041ed 00000000 569d35a2 ..
000081a4 00000199 00000000 recovery.fstab
adb.exe ls /sys
000041ed 00000000 569d35a2 .
000041ed 00000000 569d35a2 ..
000041ed 00000000 569d3614 fs
000041ed 00000000 569d35a2 devices
000041ed 00000000 569d3614 dev
000041ed 00000000 569d3614 bus
000041ed 00000000 569d35a2 class
000041ed 00000000 569d3614 firmware
000041ed 00000000 569d3614 kernel
000041ed 00000000 569d3614 power
000041ed 00000000 569d3614 module
000041ed 00000000 569d35a2 block
000041ed 00000000 569d3614 android_gsensor
000041ed 00000000 569d3614 sd-sdio
Any help in finding vold.fstab to edit it back to the original is more than welcome !

Barton69 said:
Hello everyone,
I have a typical problem - my device does not load, because it loops with android logo. It does that because i edited vold.fstab incorrectly, but have the correct lines copy in comments within the file. Problem is i don't have any idea how to enter recovery mode ( if one exist at all ) on the device! I tried most of popular combinations and nothing worked - the device always start to load normally, and loops. Most solutions to this situation is via abd, but abd does not see the device ( i guess because it's not started/not in recovery mode ).
Is there a way to access root or force the recovery ?
All i can say about the device is that there is mt97002_V4 on the digitalizer and TR976V12 on the board. I could use any help with making this work again.
Edit:
Device is running Android 4.2
ABD see the device as 0123456789ABCDEF
I managed to get the device to recovery mode by holding VOL+ and plugging in power supply.
Device does not have shell command.
I managed to get list of some files on it :
adb.exe ls /
000041ed 00000000 569d35a2 .
000041ed 00000000 569d35a2 ..
000041ed 00000000 569d35a2 cache
000041ed 00000000 569d35a2 mnt
000081a4 00000888 00000000 ueventd.rk30board.rc
000081a4 00000fa7 00000000 ueventd.rc
000081a4 00000110 00000000 ueventd.goldfish.rc
000041fd 00000000 569d35a6 tmp
000041ed 00000000 00000000 system
000041ed 00000000 569d35a2 sys
000041e8 00000000 00000000 sbin
000081a4 00021b50 00000000 rk30xxnand_ko.ko.3.0.8+
000081a4 000242df 00000000 rk30xxnand_ko.ko.3.0.36+
000041ed 00000000 00000000 res
000081a4 000040e2 00000000 readahead_list.txt
0000416d 00000000 00000000 proc
000081e8 00000655 00000000 init.rc
000081e8 0001ab34 00000000 init
000041ed 00000000 00000000 etc
000081a4 00000b12 00000000 default.prop
000041ed 00000000 569d35c5 data
000081e8 0003a930 00000000 charger
000081a4 00000c17 00000000 at18.ko
000041c0 00000000 503c74fb root
000041ed 000009c4 569d35a6 dev
adb.exe ls /system
000041ed 00000000 00000000 .
000041ed 00000000 569d35a2 ..
adb.exe ls /etc
000041ed 00000000 00000000 .
000041ed 00000000 569d35a2 ..
000081a4 00000199 00000000 recovery.fstab
adb.exe ls /sys
000041ed 00000000 569d35a2 .
000041ed 00000000 569d35a2 ..
000041ed 00000000 569d3614 fs
000041ed 00000000 569d35a2 devices
000041ed 00000000 569d3614 dev
000041ed 00000000 569d3614 bus
000041ed 00000000 569d35a2 class
000041ed 00000000 569d3614 firmware
000041ed 00000000 569d3614 kernel
000041ed 00000000 569d3614 power
000041ed 00000000 569d3614 module
000041ed 00000000 569d35a2 block
000041ed 00000000 569d3614 android_gsensor
000041ed 00000000 569d3614 sd-sdio
Any help in finding vold.fstab to edit it back to the original is more than welcome !
Click to expand...
Click to collapse
Hi
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA. Try posting your query in Android Q&A,Help and Troubleshooting or in the friendly Q&A thread here->[Ask Any Question][Newbie Friendly]. Experts there may be able to help you.
Good luck

[Completed] ZTE ZMAX Z970 stuck on loading screen and Recovery mode

I've tried everything, I wanted to revert from BrokenOS back to the stock ROM, I created a backup but I factory resetted because I thought it would revert back to stock ROM.
The only thing I have access to is the splash loading screen, and recovery mode, resetting wont do anything and whenever I try to flash a rom, it fails, I can't access my SD Card anymore.
I also tried installing a stock rom from the recovery mode, but had so success.
Please help me, I've been trying to fix my phone since yesterday, probably about 7 hours in total.
Code:
adb shell
- exec '/system/bin/sh' failed: No such file or directory (2) -
When I do adb ls /, I get this:
Code:
adb ls /
000041ed 00000000 0000abd4 .
000041ed 00000000 0000abd4 ..
000041f9 00001000 02ad81b3 persist
0000a1ff 00000015 0000abd4 sdcard
000041ed 0000003c 0000abd4 storage
000041ed 000000c8 0000abd4 mnt
00004140 00000000 0000abd4 config
000041f8 00001000 0000a47e cache
000041ed 00000000 0000abd4 acct
0000a1ff 0000000e 0000abd4 vendor
0000a1ff 00000011 0000abd4 d
0000a1ff 0000000b 0000abd4 etc
0000a1ff 00000010 0000abd3 tombstones
000041ed 00000000 0000abd3 fsg
000041ed 00000000 0000abd3 pds
00004168 00004000 00000000 firmware
000081a4 000011ef 00000000 ueventd.rc
000081a4 000023c5 00000000 ueventd.qcom.rc
000041ed 00000000 00000000 system
0000416d 00000000 0000abd2 sys
000081a4 00003949 00000000 service_contexts
000081a4 0003d1bb 00000000 sepolicy
000081a4 00000048 00000000 selinux_version
000081a4 00000886 00000000 seapp_contexts
000041e8 00000000 00000000 sbin
000041ed 00000000 00000000 res
000081a4 0000170f 00000000 property_contexts
0000416d 00000000 00000000 proc
000041ed 00000000 00000000 oem
000081e8 00000156 00000000 init.zygote32.rc
000081e8 000014db 00000000 init.usb.rc
000081e8 00002443 00000000 init.usb.configfs.rc
000081e8 0000082b 00000000 init.trace.rc
000081e8 00000ae4 00000000 init.target.rc
000081e8 0000012d 00000000 init.superuser.rc
000081e8 000000b2 00000000 init.recovery.qcom.rc
000081e8 00006b90 00000000 init.rc
000081e8 00002196 00000000 init.qcom.usb.sh
000081e8 00000b92 00000000 init.qcom.syspart_fixup.sh
000081e8 000011d1 00000000 init.qcom.ssr.sh
000081e8 000017d3 00000000 init.qcom.sh
000081e8 00000a88 00000000 init.qcom.ril.sh
000081e8 0000aeb6 00000000 init.qcom.rc
000081e8 0000309f 00000000 init.qcom.factory.sh
000081e8 000019ff 00000000 init.qcom.early_boot.sh
000081e8 00001b98 00000000 init.qcom.class_core.sh
000081e8 000026c0 00000000 init.qcom.bt.sh
000081e8 000006a6 00000000 init.mdm.sh
000081e8 00000383 00000000 init.environ.rc
000081e8 00002d93 00000000 init.draconis.usb.rc
000081e8 0000082b 00000000 init.draconis.sh
000081e8 00001fe8 00000000 init.broken.rc
000081e8 0009b340 00000000 init
000081a0 00000883 00000000 fstab.qcom
000081a4 0000c1a9 00000000 file_contexts
000081a4 0000022e 00000000 default.prop
000041f9 00001000 00009b00 data
0000a1ff 0000000d 00000000 charger
000041c0 00000000 5711aee7 root
000041ed 00003b38 0000abdf dev

ic3w0lf said:
I've tried everything, I wanted to revert from BrokenOS back to the stock ROM, I created a backup but I factory resetted because I thought it would revert back to stock ROM.
The only thing I have access to is the splash loading screen, and recovery mode, resetting wont do anything and whenever I try to flash a rom, it fails, I can't access my SD Card anymore.
I also tried installing a stock rom from the recovery mode, but had so success.
Please help me, I've been trying to fix my phone since yesterday, probably about 7 hours in total.
Code:
adb shell
- exec '/system/bin/sh' failed: No such file or directory (2) -
When I do adb ls /, I get this:
Code:
adb ls /
000041ed 00000000 0000abd4 .
000041ed 00000000 0000abd4 ..
000041f9 00001000 02ad81b3 persist
0000a1ff 00000015 0000abd4 sdcard
000041ed 0000003c 0000abd4 storage
000041ed 000000c8 0000abd4 mnt
00004140 00000000 0000abd4 config
000041f8 00001000 0000a47e cache
000041ed 00000000 0000abd4 acct
0000a1ff 0000000e 0000abd4 vendor
0000a1ff 00000011 0000abd4 d
0000a1ff 0000000b 0000abd4 etc
0000a1ff 00000010 0000abd3 tombstones
000041ed 00000000 0000abd3 fsg
000041ed 00000000 0000abd3 pds
00004168 00004000 00000000 firmware
000081a4 000011ef 00000000 ueventd.rc
000081a4 000023c5 00000000 ueventd.qcom.rc
000041ed 00000000 00000000 system
0000416d 00000000 0000abd2 sys
000081a4 00003949 00000000 service_contexts
000081a4 0003d1bb 00000000 sepolicy
000081a4 00000048 00000000 selinux_version
000081a4 00000886 00000000 seapp_contexts
000041e8 00000000 00000000 sbin
000041ed 00000000 00000000 res
000081a4 0000170f 00000000 property_contexts
0000416d 00000000 00000000 proc
000041ed 00000000 00000000 oem
000081e8 00000156 00000000 init.zygote32.rc
000081e8 000014db 00000000 init.usb.rc
000081e8 00002443 00000000 init.usb.configfs.rc
000081e8 0000082b 00000000 init.trace.rc
000081e8 00000ae4 00000000 init.target.rc
000081e8 0000012d 00000000 init.superuser.rc
000081e8 000000b2 00000000 init.recovery.qcom.rc
000081e8 00006b90 00000000 init.rc
000081e8 00002196 00000000 init.qcom.usb.sh
000081e8 00000b92 00000000 init.qcom.syspart_fixup.sh
000081e8 000011d1 00000000 init.qcom.ssr.sh
000081e8 000017d3 00000000 init.qcom.sh
000081e8 00000a88 00000000 init.qcom.ril.sh
000081e8 0000aeb6 00000000 init.qcom.rc
000081e8 0000309f 00000000 init.qcom.factory.sh
000081e8 000019ff 00000000 init.qcom.early_boot.sh
000081e8 00001b98 00000000 init.qcom.class_core.sh
000081e8 000026c0 00000000 init.qcom.bt.sh
000081e8 000006a6 00000000 init.mdm.sh
000081e8 00000383 00000000 init.environ.rc
000081e8 00002d93 00000000 init.draconis.usb.rc
000081e8 0000082b 00000000 init.draconis.sh
000081e8 00001fe8 00000000 init.broken.rc
000081e8 0009b340 00000000 init
000081a0 00000883 00000000 fstab.qcom
000081a4 0000c1a9 00000000 file_contexts
000081a4 0000022e 00000000 default.prop
000041f9 00001000 00009b00 data
0000a1ff 0000000d 00000000 charger
000041c0 00000000 5711aee7 root
000041ed 00003b38 0000abdf dev
Click to expand...
Click to collapse
Hello,
Try posting your query here Android Q&A Forum with all relevant details, the experts there maybe able to assist you.
-Vatsal

Camera Reboots

Hello all,
I've gotten a second-hand Oneplus One (my previous Oneplus One had a broken sim card reader) and was surprised to see that this device is having reboots.
The device only reboots itself only when:
1. Either the stock camera or a third-party camera app is launched
2. Flashlight is activated
Usually, after launching any camera app, the device will reboot a few seconds later. This occurs even from third-party apps like Whatsapp or Carousell.
What I've tried:
1. Tried factory resetting the phone itself, but the problem still persist.
2. Clean flashed all kinds of roms, from 6.0.1 to 5.1.1 roms, but the problem still persist. Even the stock rom, oxygenOS and CM12/CM13 have the same issue.
3. Tried changing both the battery and the rear camera module from my old Oneplus One, but the problem still persist.
4. Limiting to 4 processes, but the problem still persist.
5. Used system app remover to uninstall the stock camera app. The replaced stock camera app still have the same issue.
6. Tried playing the camera options too - such as disabling HDR mode, disable RAW formats, and all sorts of stuffs. Still the same.
Any ideas?

whitecloud93 said:
Hello all,
I've gotten a second-hand Oneplus One (my previous Oneplus One had a broken sim card reader) and was surprised to see that this device is having reboots.
The device only reboots itself only when:
1. Either the stock camera or a third-party camera app is launched
2. Flashlight is activated
Usually, after launching any camera app, the device will reboot a few seconds later. This occurs even from third-party apps like Whatsapp or Carousell.
What I've tried:
1. Tried factory resetting the phone itself, but the problem still persist.
2. Clean flashed all kinds of roms, from 6.0.1 to 5.1.1 roms, but the problem still persist. Even the stock rom, oxygenOS and CM12/CM13 have the same issue.
3. Tried changing both the battery and the rear camera module from my old Oneplus One, but the problem still persist.
4. Limiting to 4 processes, but the problem still persist.
5. Used system app remover to uninstall the stock camera app. The replaced stock camera app still have the same issue.
6. Tried playing the camera options too - such as disabling HDR mode, disable RAW formats, and all sorts of stuffs. Still the same.
Any ideas?
Click to expand...
Click to collapse
Did you try flashing factory images using fastboot?
Flash CM11 44S factory images using fastboot
Index #8 http://forum.xda-developers.com/oneplus-one/general/guides-bacon-timmaaas-how-to-guides-t2839471
This is a weird issue.

Mr hOaX said:
Did you try flashing factory images using fastboot?
Flash CM11 44S factory images using fastboot
Index #8 http://forum.xda-developers.com/oneplus-one/general/guides-bacon-timmaaas-how-to-guides-t2839471
This is a weird issue.
Click to expand...
Click to collapse
I've flashed a 64gb version factory image using fastboot via the link below before, but it didn't help too:
http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
It is a weird issue huh :/ I do suspect the motherboard is faulty, but I couldn't cannibalize it from my old Oneplus One as its sim card reader is faulty too (unless I get someone to solder it). Kinda stuck atm ><

Have you checked last_kmsg or dmesg after the reboot happend?
Sent from my A0001 using XDA-Developers mobile app

DerRomtester said:
Have you checked last_kmsg or dmesg after the reboot happend?
Sent from my A0001 using XDA-Developers mobile app
Click to expand...
Click to collapse
Unfortunately, I'm not really adept in Android stuffs, so I'm not really sure what is last_kmsg or dmesg are :/
From what I've read, they are said to be kernel and last_kernel logs.
As such, I stimulated a reboot by launching the camera, and used Syslog (an app from Play Store) to get these two logs.
Those logs are attached in the following link below:
https://drive.google.com/open?id=0B_iRT-H2Va6BV2NXb1BqdnM3REk
Hope they are the right logs ><''
Thanks for helping out again!

whitecloud93 said:
Unfortunately, I'm not really adept in Android stuffs, so I'm not really sure what is last_kmsg or dmesg are :/
From what I've read, they are said to be kernel and last_kernel logs.
As such, I stimulated a reboot by launching the camera, and used Syslog (an app from Play Store) to get these two logs.
Those logs are attached in the following link below:
https://drive.google.com/open?id=0B_iRT-H2Va6BV2NXb1BqdnM3REk
Hope they are the right logs ><''
Thanks for helping out again!
Click to expand...
Click to collapse
Yes they are great but i am bad with reading logs. The camera driver trys to move the focus and than suddenly crashes with the following error. You tried already the cm13 nightlys ? Your kernel is some versios behind and maybe it is already fixed. It could be a hardware issue, too.
Code:
[117931.530603] [40000000] *pgd=00000000
[117931.530712] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[117931.530753] CPU: 0 Tainted: G W (3.4.110-cyanogenmod-g1babf5c #1)
[117931.530825] PC is at kmem_cache_alloc+0x74/0x1e4
[117931.530867] LR is at proc_self_follow_link+0x6c/0x94
[117931.530936] pc : [<c02af210>] lr : [<c0309e48>] psr: 20000013
[117931.530936] sp : c4bddda8 ip : 00000011 fp : 082452bc
[117931.531006] r10: c4bdc028 r9 : c0309e48 r8 : 0d651000
[117931.531043] r7 : c4bdc000 r6 : 000000d0 r5 : 40000000 r4 : ee002480
[117931.531111] r3 : 00000000 r2 : 00000000 r1 : 000000d0 r0 : ee002480
[117931.531149] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
[117931.531218] Control: 10c5787d Table: 2995006a DAC: 00000015
[117931.531256]
[117931.531256] PC: 0xc02af190:
[117931.531323] f190 ffe5103c ffe50fa4 ffe50f54 e16d42f4 e1a04000 e1cd60f8 e1a06001 e1cd81f0
[117931.531702] f1b0 e1a0900e e1cda1f8 e58de020 e24dd00c e1a0300d e3c3ad7f e3ca703f e5973004
[117931.532052] f1d0 e2833001 e5873004 e5945000 ee1d8f90 e0883005 e593b004 e5973004 e2433001
[117931.532436] f1f0 e5873004 e5973000 e3130002 1a00005c e7985005 e3550000 0a000020 e5943014
[117931.532819] f210 e795e003 e10fc000 f10c0080 e5942000 e3a01000 ee1d0f90 e1a03002 e7908003
[117931.533176] f230 e1550008 0a000042 e121f00c e3510000 0affffe1 e5943014 f7def003 e3160902
[117931.533563] f250 1a000018 e5947010 e59f311c e594800c e79f3003 e5932004 e3520000 1a000018
[117931.533949] f270 e1a00005 e28dd00c e1cd40d0 e1cd60d8 e1cd81d0 e1cda1d8 e28dd020 e49df004
[117931.534333]
[117931.534333] LR: 0xc0309dc8:
[117931.534370] 9dc8 e3e00001 eafffff3 ebfadce9 ffdf62cc 00d59260 e16d41f0 e1a0300d e1a04001
[117931.534751] 9de8 e58d6008 e3c33d7f e58de00c e5902054 e3c3303f e593000c e59211e8 ebfb6501
[117931.535134] 9e08 e2506000 03e05001 1a000007 e594302c e3a00000 e283300c e7845103 e1cd40d0
[117931.535499] 9e28 e59d6008 e28dd00c e49df004 e59f302c e3a010d0 e79f3003 e5930000 ebfe94d4
[117931.535911] 9e48 e2505000 03e0500b 0affffef e59f1010 e1a02006 e08f1001 eb04fd74 eaffffea
[117931.536295] 9e68 ffdf6224 00d59188 e16d41fc e1a05003 e1cd81f0 e1a08001 e1a09002 e1cd60f8
[117931.536651] 9e88 e58de018 e24dd00c e590001c ebff127c e2504000 0a000025 ebff1231 e5840028
[117931.537036] 9ea8 e1a0000d ebfc2eff e1cd60d0 e1a00009 e3a01000 e1c464f4 e1c463f4 e1c463fc
[117931.537423]
[117931.537423] SP: 0xc4bddd28:
[117931.537461] dd28 00001678 dafc74b0 c16a6ee4 dafc74b0 00040053 00000000 c02af210 20000013
[117931.537814] dd48 ffffffff c4bddd94 0d651000 c0309e48 c4bdc028 c0109718 ee002480 000000d0
[117931.538194] dd68 00000000 00000000 ee002480 40000000 000000d0 c4bdc000 0d651000 c0309e48
[117931.538579] dd88 c4bdc028 082452bc 00000011 c4bddda8 c0309e48 c02af210 20000013 ffffffff
[117931.538932] dda8 00000000 c01c954c 577a71c1 c4bddef8 ee021ac5 00000316 c4bdde04 c4bdc000
[117931.539317] ddc8 ecd8a280 00000000 c4bdddfc c0309e48 00000000 ee021ac5 c4bddef8 c02c0d28
[117931.539699] dde8 c4bdde54 c03d8794 c4bdde14 00000000 577a71c1 ed220310 ecd8a280 ed220310
[117931.540104] de08 ecd8a280 99cf910b 00000004 ee021ac0 00000000 00000000 d9b7400a c4bddef8
[117931.540492]
[117931.540492] R0: 0xee002400:
[117931.540560] 2400 c140efc0 00000000 00000005 00000800 00000800 00000000 00000006 00030010
[117931.540907] 2420 00030010 00000002 00004000 00000002 00000000 00000800 00000040 00000000
[117931.541286] 2440 ee000180 ee0023c4 ee0024c4 eda6b7c0 ee0023d0 ee0024d0 eda1464c eda14640
[117931.541663] 2460 c14c9f90 eda6b840 00000001 00000007 ee001080 00001002 00000000 00000000
[117931.542042] 2480 c140efd8 00000000 00000006 00001000 00001000 00000000 00000002 00030008
[117931.542390] 24a0 00030008 00000001 00004000 00000004 00000000 00001000 00000040 00000000
[117931.542742] 24c0 ee0001c0 ee002444 ee002544 eda6b1c0 ee002450 ee002550 eda1464c eda14640
[117931.543126] 24e0 c14c9f90 eda6b240 00000001 00000007 ee001090 00000000 00002000 00000040
[117931.543479]
[117931.543479] R4: 0xee002400:
[117931.543547] 2400 c140efc0 00000000 00000005 00000800 00000800 00000000 00000006 00030010
[117931.543935] 2420 00030010 00000002 00004000 00000002 00000000 00000800 00000040 00000000
[117931.544285] 2440 ee000180 ee0023c4 ee0024c4 eda6b7c0 ee0023d0 ee0024d0 eda1464c eda14640
[117931.544669] 2460 c14c9f90 eda6b840 00000001 00000007 ee001080 00001002 00000000 00000000
[117931.545023] 2480 c140efd8 00000000 00000006 00001000 00001000 00000000 00000002 00030008
[117931.545407] 24a0 00030008 00000001 00004000 00000004 00000000 00001000 00000040 00000000
[117931.545762] 24c0 ee0001c0 ee002444 ee002544 eda6b1c0 ee002450 ee002550 eda1464c eda14640
[117931.546148] 24e0 c14c9f90 eda6b240 00000001 00000007 ee001090 00000000 00002000 00000040
[117931.546534]
[117931.546534] R7: 0xc4bdbf80:
[117931.546571] bf80 b5e868f8 b5e86930 00000001 c0109d44 c4bda000 00000000 b6bb7705 c01c83e4
[117931.546956] bfa0 b5e86930 c0109bc0 b5e86930 b5e868f8 00000000 000ff000 b5e868e0 00000008
[117931.547307] bfc0 b5e86930 b5e868f8 b5e86930 00000001 b5e86978 b6c25600 b67c4018 b6bb7705
[117931.547661] bfe0 00000078 b5e868f8 b6be309f b6bb2548 600f0010 00000000 00000000 00000000
[117931.548045] c000 00000002 00000002 00000000 e91ccb00 c14c5570 00000000 00000015 cea5f800
[117931.548429] c020 e91ccb00 ed0c0f00 c140e800 ed2bc300 00000000 c010225c c4bdde5c c4bdddb0
[117931.548813] c040 c0d5c434 00000000 00000000 00000000 00000000 00000000 01010000 00000000
[117931.549167] c060 937fe978 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[117931.549549]
[117931.549549] R9: 0xc0309dc8:
[117931.549586] 9dc8 e3e00001 eafffff3 ebfadce9 ffdf62cc 00d59260 e16d41f0 e1a0300d e1a04001
[117931.549998] 9de8 e58d6008 e3c33d7f e58de00c e5902054 e3c3303f e593000c e59211e8 ebfb6501
[117931.550388] 9e08 e2506000 03e05001 1a000007 e594302c e3a00000 e283300c e7845103 e1cd40d0
[117931.550771] 9e28 e59d6008 e28dd00c e49df004 e59f302c e3a010d0 e79f3003 e5930000 ebfe94d4
[117931.551121] 9e48 e2505000 03e0500b 0affffef e59f1010 e1a02006 e08f1001 eb04fd74 eaffffea
[117931.551527] 9e68 ffdf6224 00d59188 e16d41fc e1a05003 e1cd81f0 e1a08001 e1a09002 e1cd60f8
[117931.551917] 9e88 e58de018 e24dd00c e590001c ebff127c e2504000 0a000025 ebff1231 e5840028
[117931.552268] 9ea8 e1a0000d ebfc2eff e1cd60d0 e1a00009 e3a01000 e1c464f4 e1c463f4 e1c463fc
[117931.552618]
[117931.552618] R10: 0xc4bdbfa8:
[117931.552685] bfa8 b5e86930 b5e868f8 00000000 000ff000 b5e868e0 00000008 b5e86930 b5e868f8
[117931.553036] bfc8 b5e86930 00000001 b5e86978 b6c25600 b67c4018 b6bb7705 00000078 b5e868f8
[117931.553418] bfe8 b6be309f b6bb2548 600f0010 00000000 00000000 00000000 00000002 00000002
[117931.553799] c008 00000000 e91ccb00 c14c5570 00000000 00000015 cea5f800 e91ccb00 ed0c0f00
[117931.554176] c028 c140e800 ed2bc300 00000000 c010225c c4bdde5c c4bdddb0 c0d5c434 00000000
[117931.554527] c048 00000000 00000000 00000000 00000000 01010000 00000000 937fe978 00000000
[117931.554906] c068 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[117931.555289] c088 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[117931.555641] Process WifiStateMachin (pid: 2704, stack limit = 0xc4bdc2f0)
[117931.555680] Stack: (0xc4bddda8 to 0xc4bde000)
[117931.555749] dda0: 00000000 c01c954c 577a71c1 c4bddef8 ee021ac5 00000316
[117931.555788] ddc0: c4bdde04 c4bdc000 ecd8a280 00000000 c4bdddfc c0309e48 00000000 ee021ac5
[117931.555857] dde0: c4bddef8 c02c0d28 c4bdde54 c03d8794 c4bdde14 00000000 577a71c1 ed220310
[117931.555927] de00: ecd8a280 ed220310 ecd8a280 99cf910b 00000004 ee021ac0 00000000 00000000
[117931.555966] de20: d9b7400a c4bddef8 c4bdde5c c4bdc000 00000000 00000000 c4bdde54 c02c0d78
[117931.556036] de40: 00000000 00000139 d8ccc3c0 c1419e38 c1412280 ed220310 c2e44280 ed220310
[117931.556105] de60: c2e44280 0074656e 00000003 d9b74006 c1419e38 00000000 c4bddf78 d9b74000
[117931.556174] de80: c4bdc000 ffffff9c c4bdc000 00000000 c4bddef8 c02c2a10 c4bddeb4 c02778c8
[117931.556214] dea0: 00000000 cd45e5e0 980b9000 00000000 cd45e5e0 00000000 00000000 c02797c8
[117931.556284] dec0: 00000000 00000400 00000000 00000001 c4bddf78 c4bddef8 d9b74000 ffffff9c
[117931.556354] dee0: c4bdc000 00000000 00000000 c02c2da0 00000041 c02f5434 ed220310 edc04180
[117931.556423] df00: dafc6204 dafc6198 dafc6198 e97883d0 edc04080 edc26020 00000011 00000002
[117931.556463] df20: 00000004 00000002 ea25ee80 ee021ac0 00000000 ffffff9c 0000011f e9d15e00
[117931.556531] df40: e18c5480 00000000 e9d15e40 00020000 00000000 d8ccc3c0 0000011f d9b74000
[117931.556601] df60: ffffff9c 00000001 c0109d44 c02b3f1c 00000000 d8cccc00 00020000 c02b0000
[117931.556670] df80: 00000024 00000100 e9d15e40 b6ca1d38 00000004 b6e23599 00000142 c0109d44
[117931.556709] dfa0: c4bdc000 c0109bc0 b6ca1d38 00000004 ffffff9c b6e23599 00020000 00000000
[117931.556779] dfc0: b6ca1d38 00000004 b6e23599 00000142 00000001 9eb3fcd8 000eb0ce 00000000
[117931.556849] dfe0: 13cbe820 937fe130 b6c2a095 b6c57530 600f0010 ffffff9c 00000000 00000000
[117931.556896] [<c02af210>] (kmem_cache_alloc+0x74/0x1e4) from [<c0309e48>] (proc_self_follow_link+0x6c/0x94)
[117931.556972] [<c0309e48>] (proc_self_follow_link+0x6c/0x94) from [<c02c0d28>] (link_path_walk+0x43c/0x8d8)
[117931.557045] [<c02c0d28>] (link_path_walk+0x43c/0x8d8) from [<c02c0d78>] (link_path_walk+0x48c/0x8d8)
[117931.557117] [<c02c0d78>] (link_path_walk+0x48c/0x8d8) from [<c02c2a10>] (path_openat+0xac/0x400)
[117931.557189] [<c02c2a10>] (path_openat+0xac/0x400) from [<c02c2da0>] (do_filp_open+0x3c/0xa4)
[117931.557261] [<c02c2da0>] (do_filp_open+0x3c/0xa4) from [<c02b3f1c>] (do_sys_open+0xf0/0x198)
[117931.557307] [<c02b3f1c>] (do_sys_open+0xf0/0x198) from [<c0109bc0>] (ret_fast_syscall+0x0/0x30)
[117931.557378] Code: e7985005 e3550000 0a000020 e5943014 (e795e003)
[117931.563237] ---[ end trace d7316cdb6053180e ]---
[117931.563303] Kernel panic - not syncing: Fatal exception
[117931.563401] CPU3: stopping
[117931.563476] [<c0110ce8>] (unwind_backtrace+0x0/0x160) from [<c010fa1c>] (handle_IPI+0x1f8/0x234)
[117931.563577] [<c010fa1c>] (handle_IPI+0x1f8/0x234) from [<c0102950>] (gic_handle_irq+0xd0/0x134)
[117931.563638] [<c0102950>] (gic_handle_irq+0xd0/0x134) from [<c010995c>] (__irq_usr+0x3c/0x60)
[117931.563732] Exception stack(0xe84d9fb0 to 0xe84d9ff8)
[117931.563825] 9fa0: aec236f4 aef39c88 00000003 00000000
[117931.563877] 9fc0: b3902a80 95a54900 aec236c0 aef39c88 aec236f4 aeeff694 aea97478 00000000
[117931.563968] 9fe0: b3623384 aeeff620 b362741f b3623380 80050010 ffffffff
[117931.564063] CPU2: stopping
[117931.564564] [<c0110ce8>] (unwind_backtrace+0x0/0x160) from [<c010fa1c>] (handle_IPI+0x1f8/0x234)
[117931.564688] [<c010fa1c>] (handle_IPI+0x1f8/0x234) from [<c0102950>] (gic_handle_irq+0xd0/0x134)
[117931.564747] [<c0102950>] (gic_handle_irq+0xd0/0x134) from [<c010995c>] (__irq_usr+0x3c/0x60)
[117931.564839] Exception stack(0xe863bfb0 to 0xe863bff8)
[117931.564929] bfa0: 00000000 b6c7288d b6c98600 00000040
[117931.564981] bfc0: 00000006 00000006 00002ed4 b4c56e40 1525f310 b4c76500 12c5c890 00000000
[117931.565072] bfe0: b6e7fe24 bef8fc38 b6e6eb5b b6c728ac 600f0030 ffffffff
[117932.565585] wcnss crash shutdown 0
[117932.565636] Rebooting in 5 seconds..
[117937.567241] Going down for restart now
[117937.567960] Calling SCM to disable SPMI PMIC arbiter

DerRomtester said:
Yes they are great but i am bad with reading logs. The camera driver trys to move the focus and than suddenly crashes with the following error. You tried already the cm13 nightlys ? Your kernel is some versios behind and maybe it is already fixed. It could be a hardware issue, too.
Code:
[117931.530603] [40000000] *pgd=00000000
[117931.530712] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[117931.530753] CPU: 0 Tainted: G W (3.4.110-cyanogenmod-g1babf5c #1)
[117931.530825] PC is at kmem_cache_alloc+0x74/0x1e4
[117931.530867] LR is at proc_self_follow_link+0x6c/0x94
[117931.530936] pc : [<c02af210>] lr : [<c0309e48>] psr: 20000013
[117931.530936] sp : c4bddda8 ip : 00000011 fp : 082452bc
[117931.531006] r10: c4bdc028 r9 : c0309e48 r8 : 0d651000
[117931.531043] r7 : c4bdc000 r6 : 000000d0 r5 : 40000000 r4 : ee002480
[117931.531111] r3 : 00000000 r2 : 00000000 r1 : 000000d0 r0 : ee002480
[117931.531149] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
[117931.531218] Control: 10c5787d Table: 2995006a DAC: 00000015
[117931.531256]
[117931.531256] PC: 0xc02af190:
[117931.531323] f190 ffe5103c ffe50fa4 ffe50f54 e16d42f4 e1a04000 e1cd60f8 e1a06001 e1cd81f0
[117931.531702] f1b0 e1a0900e e1cda1f8 e58de020 e24dd00c e1a0300d e3c3ad7f e3ca703f e5973004
[117931.532052] f1d0 e2833001 e5873004 e5945000 ee1d8f90 e0883005 e593b004 e5973004 e2433001
[117931.532436] f1f0 e5873004 e5973000 e3130002 1a00005c e7985005 e3550000 0a000020 e5943014
[117931.532819] f210 e795e003 e10fc000 f10c0080 e5942000 e3a01000 ee1d0f90 e1a03002 e7908003
[117931.533176] f230 e1550008 0a000042 e121f00c e3510000 0affffe1 e5943014 f7def003 e3160902
[117931.533563] f250 1a000018 e5947010 e59f311c e594800c e79f3003 e5932004 e3520000 1a000018
[117931.533949] f270 e1a00005 e28dd00c e1cd40d0 e1cd60d8 e1cd81d0 e1cda1d8 e28dd020 e49df004
[117931.534333]
[117931.534333] LR: 0xc0309dc8:
[117931.534370] 9dc8 e3e00001 eafffff3 ebfadce9 ffdf62cc 00d59260 e16d41f0 e1a0300d e1a04001
[117931.534751] 9de8 e58d6008 e3c33d7f e58de00c e5902054 e3c3303f e593000c e59211e8 ebfb6501
[117931.535134] 9e08 e2506000 03e05001 1a000007 e594302c e3a00000 e283300c e7845103 e1cd40d0
[117931.535499] 9e28 e59d6008 e28dd00c e49df004 e59f302c e3a010d0 e79f3003 e5930000 ebfe94d4
[117931.535911] 9e48 e2505000 03e0500b 0affffef e59f1010 e1a02006 e08f1001 eb04fd74 eaffffea
[117931.536295] 9e68 ffdf6224 00d59188 e16d41fc e1a05003 e1cd81f0 e1a08001 e1a09002 e1cd60f8
[117931.536651] 9e88 e58de018 e24dd00c e590001c ebff127c e2504000 0a000025 ebff1231 e5840028
[117931.537036] 9ea8 e1a0000d ebfc2eff e1cd60d0 e1a00009 e3a01000 e1c464f4 e1c463f4 e1c463fc
[117931.537423]
[117931.537423] SP: 0xc4bddd28:
[117931.537461] dd28 00001678 dafc74b0 c16a6ee4 dafc74b0 00040053 00000000 c02af210 20000013
[117931.537814] dd48 ffffffff c4bddd94 0d651000 c0309e48 c4bdc028 c0109718 ee002480 000000d0
[117931.538194] dd68 00000000 00000000 ee002480 40000000 000000d0 c4bdc000 0d651000 c0309e48
[117931.538579] dd88 c4bdc028 082452bc 00000011 c4bddda8 c0309e48 c02af210 20000013 ffffffff
[117931.538932] dda8 00000000 c01c954c 577a71c1 c4bddef8 ee021ac5 00000316 c4bdde04 c4bdc000
[117931.539317] ddc8 ecd8a280 00000000 c4bdddfc c0309e48 00000000 ee021ac5 c4bddef8 c02c0d28
[117931.539699] dde8 c4bdde54 c03d8794 c4bdde14 00000000 577a71c1 ed220310 ecd8a280 ed220310
[117931.540104] de08 ecd8a280 99cf910b 00000004 ee021ac0 00000000 00000000 d9b7400a c4bddef8
[117931.540492]
[117931.540492] R0: 0xee002400:
[117931.540560] 2400 c140efc0 00000000 00000005 00000800 00000800 00000000 00000006 00030010
[117931.540907] 2420 00030010 00000002 00004000 00000002 00000000 00000800 00000040 00000000
[117931.541286] 2440 ee000180 ee0023c4 ee0024c4 eda6b7c0 ee0023d0 ee0024d0 eda1464c eda14640
[117931.541663] 2460 c14c9f90 eda6b840 00000001 00000007 ee001080 00001002 00000000 00000000
[117931.542042] 2480 c140efd8 00000000 00000006 00001000 00001000 00000000 00000002 00030008
[117931.542390] 24a0 00030008 00000001 00004000 00000004 00000000 00001000 00000040 00000000
[117931.542742] 24c0 ee0001c0 ee002444 ee002544 eda6b1c0 ee002450 ee002550 eda1464c eda14640
[117931.543126] 24e0 c14c9f90 eda6b240 00000001 00000007 ee001090 00000000 00002000 00000040
[117931.543479]
[117931.543479] R4: 0xee002400:
[117931.543547] 2400 c140efc0 00000000 00000005 00000800 00000800 00000000 00000006 00030010
[117931.543935] 2420 00030010 00000002 00004000 00000002 00000000 00000800 00000040 00000000
[117931.544285] 2440 ee000180 ee0023c4 ee0024c4 eda6b7c0 ee0023d0 ee0024d0 eda1464c eda14640
[117931.544669] 2460 c14c9f90 eda6b840 00000001 00000007 ee001080 00001002 00000000 00000000
[117931.545023] 2480 c140efd8 00000000 00000006 00001000 00001000 00000000 00000002 00030008
[117931.545407] 24a0 00030008 00000001 00004000 00000004 00000000 00001000 00000040 00000000
[117931.545762] 24c0 ee0001c0 ee002444 ee002544 eda6b1c0 ee002450 ee002550 eda1464c eda14640
[117931.546148] 24e0 c14c9f90 eda6b240 00000001 00000007 ee001090 00000000 00002000 00000040
[117931.546534]
[117931.546534] R7: 0xc4bdbf80:
[117931.546571] bf80 b5e868f8 b5e86930 00000001 c0109d44 c4bda000 00000000 b6bb7705 c01c83e4
[117931.546956] bfa0 b5e86930 c0109bc0 b5e86930 b5e868f8 00000000 000ff000 b5e868e0 00000008
[117931.547307] bfc0 b5e86930 b5e868f8 b5e86930 00000001 b5e86978 b6c25600 b67c4018 b6bb7705
[117931.547661] bfe0 00000078 b5e868f8 b6be309f b6bb2548 600f0010 00000000 00000000 00000000
[117931.548045] c000 00000002 00000002 00000000 e91ccb00 c14c5570 00000000 00000015 cea5f800
[117931.548429] c020 e91ccb00 ed0c0f00 c140e800 ed2bc300 00000000 c010225c c4bdde5c c4bdddb0
[117931.548813] c040 c0d5c434 00000000 00000000 00000000 00000000 00000000 01010000 00000000
[117931.549167] c060 937fe978 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[117931.549549]
[117931.549549] R9: 0xc0309dc8:
[117931.549586] 9dc8 e3e00001 eafffff3 ebfadce9 ffdf62cc 00d59260 e16d41f0 e1a0300d e1a04001
[117931.549998] 9de8 e58d6008 e3c33d7f e58de00c e5902054 e3c3303f e593000c e59211e8 ebfb6501
[117931.550388] 9e08 e2506000 03e05001 1a000007 e594302c e3a00000 e283300c e7845103 e1cd40d0
[117931.550771] 9e28 e59d6008 e28dd00c e49df004 e59f302c e3a010d0 e79f3003 e5930000 ebfe94d4
[117931.551121] 9e48 e2505000 03e0500b 0affffef e59f1010 e1a02006 e08f1001 eb04fd74 eaffffea
[117931.551527] 9e68 ffdf6224 00d59188 e16d41fc e1a05003 e1cd81f0 e1a08001 e1a09002 e1cd60f8
[117931.551917] 9e88 e58de018 e24dd00c e590001c ebff127c e2504000 0a000025 ebff1231 e5840028
[117931.552268] 9ea8 e1a0000d ebfc2eff e1cd60d0 e1a00009 e3a01000 e1c464f4 e1c463f4 e1c463fc
[117931.552618]
[117931.552618] R10: 0xc4bdbfa8:
[117931.552685] bfa8 b5e86930 b5e868f8 00000000 000ff000 b5e868e0 00000008 b5e86930 b5e868f8
[117931.553036] bfc8 b5e86930 00000001 b5e86978 b6c25600 b67c4018 b6bb7705 00000078 b5e868f8
[117931.553418] bfe8 b6be309f b6bb2548 600f0010 00000000 00000000 00000000 00000002 00000002
[117931.553799] c008 00000000 e91ccb00 c14c5570 00000000 00000015 cea5f800 e91ccb00 ed0c0f00
[117931.554176] c028 c140e800 ed2bc300 00000000 c010225c c4bdde5c c4bdddb0 c0d5c434 00000000
[117931.554527] c048 00000000 00000000 00000000 00000000 01010000 00000000 937fe978 00000000
[117931.554906] c068 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[117931.555289] c088 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[117931.555641] Process WifiStateMachin (pid: 2704, stack limit = 0xc4bdc2f0)
[117931.555680] Stack: (0xc4bddda8 to 0xc4bde000)
[117931.555749] dda0: 00000000 c01c954c 577a71c1 c4bddef8 ee021ac5 00000316
[117931.555788] ddc0: c4bdde04 c4bdc000 ecd8a280 00000000 c4bdddfc c0309e48 00000000 ee021ac5
[117931.555857] dde0: c4bddef8 c02c0d28 c4bdde54 c03d8794 c4bdde14 00000000 577a71c1 ed220310
[117931.555927] de00: ecd8a280 ed220310 ecd8a280 99cf910b 00000004 ee021ac0 00000000 00000000
[117931.555966] de20: d9b7400a c4bddef8 c4bdde5c c4bdc000 00000000 00000000 c4bdde54 c02c0d78
[117931.556036] de40: 00000000 00000139 d8ccc3c0 c1419e38 c1412280 ed220310 c2e44280 ed220310
[117931.556105] de60: c2e44280 0074656e 00000003 d9b74006 c1419e38 00000000 c4bddf78 d9b74000
[117931.556174] de80: c4bdc000 ffffff9c c4bdc000 00000000 c4bddef8 c02c2a10 c4bddeb4 c02778c8
[117931.556214] dea0: 00000000 cd45e5e0 980b9000 00000000 cd45e5e0 00000000 00000000 c02797c8
[117931.556284] dec0: 00000000 00000400 00000000 00000001 c4bddf78 c4bddef8 d9b74000 ffffff9c
[117931.556354] dee0: c4bdc000 00000000 00000000 c02c2da0 00000041 c02f5434 ed220310 edc04180
[117931.556423] df00: dafc6204 dafc6198 dafc6198 e97883d0 edc04080 edc26020 00000011 00000002
[117931.556463] df20: 00000004 00000002 ea25ee80 ee021ac0 00000000 ffffff9c 0000011f e9d15e00
[117931.556531] df40: e18c5480 00000000 e9d15e40 00020000 00000000 d8ccc3c0 0000011f d9b74000
[117931.556601] df60: ffffff9c 00000001 c0109d44 c02b3f1c 00000000 d8cccc00 00020000 c02b0000
[117931.556670] df80: 00000024 00000100 e9d15e40 b6ca1d38 00000004 b6e23599 00000142 c0109d44
[117931.556709] dfa0: c4bdc000 c0109bc0 b6ca1d38 00000004 ffffff9c b6e23599 00020000 00000000
[117931.556779] dfc0: b6ca1d38 00000004 b6e23599 00000142 00000001 9eb3fcd8 000eb0ce 00000000
[117931.556849] dfe0: 13cbe820 937fe130 b6c2a095 b6c57530 600f0010 ffffff9c 00000000 00000000
[117931.556896] [<c02af210>] (kmem_cache_alloc+0x74/0x1e4) from [<c0309e48>] (proc_self_follow_link+0x6c/0x94)
[117931.556972] [<c0309e48>] (proc_self_follow_link+0x6c/0x94) from [<c02c0d28>] (link_path_walk+0x43c/0x8d8)
[117931.557045] [<c02c0d28>] (link_path_walk+0x43c/0x8d8) from [<c02c0d78>] (link_path_walk+0x48c/0x8d8)
[117931.557117] [<c02c0d78>] (link_path_walk+0x48c/0x8d8) from [<c02c2a10>] (path_openat+0xac/0x400)
[117931.557189] [<c02c2a10>] (path_openat+0xac/0x400) from [<c02c2da0>] (do_filp_open+0x3c/0xa4)
[117931.557261] [<c02c2da0>] (do_filp_open+0x3c/0xa4) from [<c02b3f1c>] (do_sys_open+0xf0/0x198)
[117931.557307] [<c02b3f1c>] (do_sys_open+0xf0/0x198) from [<c0109bc0>] (ret_fast_syscall+0x0/0x30)
[117931.557378] Code: e7985005 e3550000 0a000020 e5943014 (e795e003)
[117931.563237] ---[ end trace d7316cdb6053180e ]---
[117931.563303] Kernel panic - not syncing: Fatal exception
[117931.563401] CPU3: stopping
[117931.563476] [<c0110ce8>] (unwind_backtrace+0x0/0x160) from [<c010fa1c>] (handle_IPI+0x1f8/0x234)
[117931.563577] [<c010fa1c>] (handle_IPI+0x1f8/0x234) from [<c0102950>] (gic_handle_irq+0xd0/0x134)
[117931.563638] [<c0102950>] (gic_handle_irq+0xd0/0x134) from [<c010995c>] (__irq_usr+0x3c/0x60)
[117931.563732] Exception stack(0xe84d9fb0 to 0xe84d9ff8)
[117931.563825] 9fa0: aec236f4 aef39c88 00000003 00000000
[117931.563877] 9fc0: b3902a80 95a54900 aec236c0 aef39c88 aec236f4 aeeff694 aea97478 00000000
[117931.563968] 9fe0: b3623384 aeeff620 b362741f b3623380 80050010 ffffffff
[117931.564063] CPU2: stopping
[117931.564564] [<c0110ce8>] (unwind_backtrace+0x0/0x160) from [<c010fa1c>] (handle_IPI+0x1f8/0x234)
[117931.564688] [<c010fa1c>] (handle_IPI+0x1f8/0x234) from [<c0102950>] (gic_handle_irq+0xd0/0x134)
[117931.564747] [<c0102950>] (gic_handle_irq+0xd0/0x134) from [<c010995c>] (__irq_usr+0x3c/0x60)
[117931.564839] Exception stack(0xe863bfb0 to 0xe863bff8)
[117931.564929] bfa0: 00000000 b6c7288d b6c98600 00000040
[117931.564981] bfc0: 00000006 00000006 00002ed4 b4c56e40 1525f310 b4c76500 12c5c890 00000000
[117931.565072] bfe0: b6e7fe24 bef8fc38 b6e6eb5b b6c728ac 600f0030 ffffffff
[117932.565585] wcnss crash shutdown 0
[117932.565636] Rebooting in 5 seconds..
[117937.567241] Going down for restart now
[117937.567960] Calling SCM to disable SPMI PMIC arbiter
Click to expand...
Click to collapse
Sorry for the late reply :/ I've tried flashing other roms with updated kernels, such as the CM13 nightlies with kernel 3.4 from here:
http://forum.xda-developers.com/one...m-kernel-unofficial-cyanogenmod-13-0-t3242700
The camera still crashes the device after it is being activated ><

Have you tried SultanXDA's build? From the looks of it, I'm 85-90% sure this is a software issue, not hardware (since you already changed the battery and camera) so try Sultan's build. He modded the camera HAL a lot so it might help.
Let us know how it works.
Sent from my OnePlus One using XDA Labs

kamikaze666 said:
Have you tried SultanXDA's build? From the looks of it, I'm 85-90% sure this is a software issue, not hardware (since you already changed the battery and camera) so try Sultan's build. He modded the camera HAL a lot so it might help.
Let us know how it works.
Sent from my OnePlus One using XDA Labs
Click to expand...
Click to collapse
Thanks for the quick reply!
I've clean flashed SultanXDA's build from the link below, both the latest build and the stable build:
http://forum.xda-developers.com/one...m-kernel-unofficial-cyanogenmod-13-0-t3242700
In both builds, my OPO is able to launch the camera and took a few photos. However, after using the phone for awhile, the device will reboot itself again :/
One thing noticeable however, is that the time between the camera launch and the reboot is much longer in this Sultan rom (as compared to other roms like cm13).

I have done the following today, but the problem still persist:
1. Full wipe (includes data, cache, dalvik cache, system and internal memory)
2. Fastboot install stock image from the 'Oneplus One return to 100% stock' forum thread
Upon launching the camera, the device will reboot a few seconds later D:
Just curious - is it possible to uninstall the stock camera and install a third party camera app? It might be a possible workaround through this problem

Database Info

welcome