Music is breaking up randomly when playing via bluetooth. No matter if screen is on or off.
Device: New A51. Software is up to date - A51FXXU1ASL6/A515FOXM2ASL6/A515FXXU1ASL3 - Security patch level December 1, 2019
Same on all apps Spotify / Play Music / Youtube and on all bt devices samsung soundbar / Android Auto / JBL charge 3
I have already disabled battery optimization and made sure apps are not in sleeping mode. Also been through the network setting reset stuff.
Any suggestion?
It's a firmware problem, I had the same exact version. Just wait for the new OTA (it should be released in the next days for Europe) or flash a firmware from another country through Odin (official firmware won't break Knox, that's what I did).
activate the developer mode, look for the AVRCP bluetooth section, and set version 1.3. I have resolved this
nextgrafica said:
activate the developer mode, look for the AVRCP bluetooth section, and set version 1.3. I have resolved this
Click to expand...
Click to collapse
Didn't work for me. Waiting for the update
Same here, didn't work. In fact tried all bluetooth related settings in dev options. Actually, I had no clue what I was doing but anyhow nothing solved my issue so far.
kidzastre said:
Didn't work for me. Waiting for the update
Click to expand...
Click to collapse
Restart phone
nextgrafica said:
Restart phone
Click to expand...
Click to collapse
Yeah, grown up on the IT crowd.
No luck though.
fishmong3r said:
Yeah, grown up on the IT crowd.
No luck though.
Click to expand...
Click to collapse
U2ATA8 does not have BT problem
jimrfraser said:
U2ATA8 does not have BT problem
Click to expand...
Click to collapse
Based on your use did U2ATA8 also address the overall performance issues? Thanks
scufita.rosie said:
Based on your use did U2ATA8 also address the overall performance issues? Thanks
Click to expand...
Click to collapse
Yes it did. Before it would stutter big time browsing on any browser. Now smooth scrolling
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I just got the U2ATA8 update and I can confirm that it fixes the Bluetooth issue as well as addresses the awful performance issues it had.
scufita.rosie said:
I just got the U2ATA8 update and I can confirm that it fixes the Bluetooth issue as well as addresses the awful performance issues it had.
Click to expand...
Click to collapse
Is this the new March update or the current firmware (Dec/Jan) from another country? Thank you
it's the february security patch once.
matoolhaq said:
Is this the new March update or the current firmware (Dec/Jan) from another country? Thank you
Click to expand...
Click to collapse
Related
Just got this update
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LM-V600 using Tapatalk
I got it a couple days ago, haven't noticed any bug fixes just a security patch I think
Some_Ghost said:
I got it a couple days ago, haven't noticed any bug fixes just a security patch I think
Click to expand...
Click to collapse
What kinda bugs are you experiencing?
Clearly t-mobile fix the gesture bug. I don't use the nav keys but the swipe gestures would sometime not respond before the update and now it works properly
rkingsparx81 said:
Clearly t-mobile fix the gesture bug. I don't use the nav keys but the swipe gestures would sometime not respond before the update and now it works properly
Click to expand...
Click to collapse
Good to hear. My T-Mobile V60 is supposed to arrive tomorrow. I'm pretty pumped for it to get here
Facebook still crashes on fullscreen. Update seems to fix Instagram crashing on the left screen. Gesture navigation still has to be set everytime you reset.
For those who had upgraded with the April security patch, what is your software version? Still remains as V600TM10i?
wwyjoe said:
For those who had upgraded with the April security patch, what is your software version? Still remains as V600TM10i?
Click to expand...
Click to collapse
Mine ends with j
Sent from my LM-V600 using Tapatalk
Ryano89 said:
What kinda bugs are you experiencing?
Click to expand...
Click to collapse
ghost touches, UI lag, Fullscreen crashes, mostly those three...
Some_Ghost said:
ghost touches, UI lag, Fullscreen crashes, mostly those three...
Click to expand...
Click to collapse
Thanks, I'll keep on the lookout for them, i just got the device today
This is the software version after the update for tmobile
Thanks for sharing. Still haven't receive the April security update. Any TMobile users experiencing the same?
wwyjoe said:
Thanks for sharing. Still haven't receive the April security update. Any TMobile users experiencing the same?
Click to expand...
Click to collapse
I had to do it manually. Try going to settings, system, update center, system update
Thanks. That's what I did, but still no prompt for update. Mine currently remains as Feb security patch.
wwyjoe said:
Thanks. That's what I did, but still no prompt for update. Mine currently remains as Feb security patch.
Click to expand...
Click to collapse
did you try LGUP?
Some_Ghost said:
did you try LGUP?
Click to expand...
Click to collapse
Yup, managed to flash via LGUP. Not sure why in the first place i didn't get the OTA, but oh well...
Thanks!
Hello everybody,
In my notification scren when i scroll down the message goes up again.Looks strange also i cant answer when i am in landscape mode.
Notice this problem with ONEui 3,0 android 11.(no root device, europian model exynos)
I made factory reset from phone settings twice, hard factory reset clear cashe repair apps from stock recovery.nothing..
here some photos for more clear view of my issue.Sorry for my bad english.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's been an ongoing issue since the beta. Samsung was made aware but chose not to fix it.
Haunt3r said:
It's been an ongoing issue since the beta. Samsung was made aware but chose not to fix it.
Click to expand...
Click to collapse
Really? so we have to 'live' with this issue with this phone
alexanter the great said:
Really? so we have to 'live' with this issue with this phone
Click to expand...
Click to collapse
I reported it once on the first initial one ui 3.0 and then again once I upgraded to ctl7, hopefully it gets fixed, but it doesn't seem like a priority to them. i actually just downgraded to 2.5 cause I hate the bugs they currently have.
Haunt3r said:
I reported it once on the first initial one ui 3.0 and then again once I upgraded to ctl7, hopefully it gets fixed, but it doesn't seem like a priority to them. i actually just downgraded to 2.5 cause I hate the bugs they currently have.
Click to expand...
Click to collapse
Eventually is the time frame. Samsung took over a year to fix the Buds+ firmware. Lol not sure it's optimized even now and niether is Samsung
It probably will get fixed... eventually
Strange I'm not having this issue on mine at all. I got European version too but nordic one and my notification part is fine for me.
Jake.S said:
Strange I'm not having this issue on mine at all. I got European version too but nordic one and my notification part is fine for me.
Click to expand...
Click to collapse
probably a few devices have this and that is the reason its not a priority for samsung..
alexanter the great said:
probably a few devices have this and that is the reason its not a priority for samsung..
Click to expand...
Click to collapse
Samsung will substitute smaller chipsets and components during a production run if need be. Result is the firmware may not be compatible for those chipsets/components until the glitch is noticed and firmware updated to include them.
Add to that there are many variants of firmware because of different carriers and countries.
Hi,
I have followed the following steps to change region to use Samsung pay. But no matter how many times I've restarted or cleared cache of wear os app, I couldn't update the watch to One UI 4 that was recently rolled out.
Steps used to change region:
[Guide] GPay in unsupported country (Yes, India too)
Okay so after having tried several guides, apps hacks and what nots, I couldn't get GPay to work here in India. However after some more fiddling around I ended up getting access to rather easily than expected. I'd straight away get to the steps...
forum.xda-developers.com
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
good for you i wish i can do downgrade : )
berni502 said:
good for you i wish i can do downgrade : )
Click to expand...
Click to collapse
Oh, the update is so bad ?
ksbalajee said:
Oh, the update is so bad ?
Click to expand...
Click to collapse
yep it mess up aod in most custom watch faces and its turning it off time to time even on system ones some ppl are whining about issues with gpay i will pass on this update if i only can xD
your fortunate.... enjoy the update is buggy big time
ksbalajee said:
Hi,
I have followed the following steps to change region to use Samsung pay. But no matter how many times I've restarted or cleared cache of wear os app, I couldn't update the watch to One UI 4 that was recently rolled out.
Steps used to change region:
[Guide] GPay in unsupported country (Yes, India too)
Okay so after having tried several guides, apps hacks and what nots, I couldn't get GPay to work here in India. However after some more fiddling around I ended up getting access to rather easily than expected. I'd straight away get to the steps...
forum.xda-developers.com
View attachment 5536041
Click to expand...
Click to collapse
I am also same issue no updates coming, many of saying only 1 time can change csc, now am also stucked this.
Be happy that you haven't updated. My watch4classic has updated and there are too many bugs incl Calendar complication. and AoD being screwed by Samsung for all custom watchfaces.
Is there any further updates rolled out? I'm still stuck in the same state without updates
I received FW update in NLD on March 2nd (R880XXU1EVB4).
I didn't have any problems before (I dont use fancy WF nor AOD), so I can't tell you if the latest FW solved anything...
Can some people reporting about the battery life on R870XXU1-EVB4?
QuiDC96 said:
Can some people reporting about the battery life on R870XXU1-EVB4?
Click to expand...
Click to collapse
Battery life seems much worse.
jkpsaras said:
Battery life seems much worse.
Click to expand...
Click to collapse
Mines unchanged i.e. 2 days usage before charging.
Is it missing for anyone else? I can't even find it in the settings anymore. I know for a fact I had it when I got the phone because I was using it to see the FPS in AetherSX2.
I noticed it was missing on the November update earlier today and it's still missing on the December update.
EtherealRemnant said:
Is it missing for anyone else? I can't even find it in the settings anymore. I know for a fact I had it when I got the phone because I was using it to see the FPS in AetherSX2.
I noticed it was missing on the November update earlier today and it's still missing on the December update.
Click to expand...
Click to collapse
I have it in Settings>Google>Game Dashboard. December update.
Lughnasadh said:
I have it in Settings>Google>Game Dashboard. December update.
Click to expand...
Click to collapse
Strange. It wasn't there earlier but it's there now. I had just checked there before I made the post >:/
It wasn't there on the November update either so maybe it was a Google Play System Update thing as I just noticed it updated while my phone was charging.
EtherealRemnant said:
Strange. It wasn't there earlier but it's there now. I had just checked there before I made the post >:/
It wasn't there on the November update either so maybe it was a Google Play System Update thing as I just noticed it updated while my phone was charging.
Click to expand...
Click to collapse
It's part of Google Play Services, so since that is part of the Google Play System Updates, that sounds about right.
Lughnasadh said:
It's part of Google Play Services, so since that is part of the Google Play System Updates, that sounds about right.
Click to expand...
Click to collapse
I had checked for a Play System Update before I flashed the December update when I noticed it missing and there wasn't one lol. It still says October 1st after making me restart my phone too.
Oh well, it's there now, thanks.
I did a factory reset because of some crazy battery drain I couldn't figure out and it's gone again. No Play System Update available.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just checked, it's also missing for me! Newest firmware / play components
MY US based Watch 4 Non-LTE was just updated U1GVK7 update today 12/06/22 - Android Security Patch Level still on November 1, 2022
New Ball Watch face added, Stability codes applied to Notification + device behavior and the usual Stability and reliability updates.
Checked again for updates for my AT&T LTE Watch 4 Classic, but there's no update available. It is still at the U1GVH2 release.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That's good, hopefully more will be getting it soon... Cheers
I went into Wear and checked for updates and it came right up. That was about an hour and a half ago.
Dumb question. My watch is LTE but I'm only connected via Bluetooth for now. This is not for my phone, correct?
dkearns said:
Dumb question. My watch is LTE but I'm only connected via Bluetooth for now. This is not for my phone, correct?
Click to expand...
Click to collapse
This update is for the watch.... This is a GW4 thread!
Srbija2012 said:
This update is for the watch.... This is a GW4 thread!
Click to expand...
Click to collapse
Can confirm, out for GW4 LTE India too.
Any other noticeable changes ??
tamanaco said:
MY US based Watch 4 Non-LTE was just updated U1GVK7 update today 12/06/22 - Android Security Patch Level still on November 1, 2022
New Ball Watch face added, Stability codes applied to Notification + device behavior and the usual Stability and reliability updates.
Checked again for updates for my AT&T LTE Watch 4 Classic, but there's no update available. It is still at the U1GVH2 release.
View attachment 5778823
Click to expand...
Click to collapse
ppurushu said:
Any other noticeable changes ??
Click to expand...
Click to collapse
One small enhancement that I noticed is that you don't have to navigate to the last page in order to "Close All" running apps. There is a small "Close All" bubble on the initial page.
Rec'd in Australia
Got it in eastern US.
I received it yesterday for my watch 4 classic
Mine didn't notify me until today. Just told it to install. Didn't seem to break anything (but haven't used it yet). It did the typical restart into the loading firmware screen (gears), rebooted, startup stuff/etc. After that, the "Galaxy Wearable" app on the phone asked for an update. So I approved that. Everything still seemed normal.
And then, when I woke the watch up again to play with it, it popped up "Updating Watch" and "copying update". A second update??? Waited for the download. Then it asked about updating now or overnight, I told it go ahead, and it went through the whole thing again??? Reboot, gears, progress indicator, reboot, startup. I have never seen that behavior before.
Maybe your update fail...
Check if you are really on new "numbers"...
*#1234#
Or look into About Watch...
Best Regards
It really must have been two.... looks like I am on an even newer version than what is listed here. Now on R890XXU1GVK7