If you’re using Oukitel K13 Pro or planning to buy it, this guide is for you. If you’re an advanced user or a developer who customizes, flash files quite often and now want to root your device, you have to follow this guide properly. Here in this article, i will share with you an easy method to root Oukitel K13 Pro Using Magisk.
What is rooting?
Rooting for Android device means access to the root directory of your android mobile system. It will give you the superuser access as an administrator to use your device over an Android subsystem and system apps. It’s quite similar to the jailbreaking. Without rooting your Android handset, you can’t change/edit/delete system files or apps easily. Most of the advanced users or developers perform rooting access for customizations and modifications. This isn’t necessary if you’re a normal user.
Steps To Root Oukitel K13 Pro via Magisk
First of all, you should unlock bootloader on Oukitel K13 Pro
Disclaimer:
Unlocking the device bootloader and installing root will void your device warranty (if applicable). This rooting method is only tested on the EU version of the manufacturers firmware, i can't guarantee it works on the other firmware versions. The bootloader unlocking process will also delete all the device internal data as well. So, make sure to take a complete backup of device data at first before doing anything. I will not be responsible for any kind of bootloops or crashes or any damage to your device while/after following this guide. Proceed at your own risk.
First of all, charge the phone fully.
Next, enable USB Debugging on Oukitel K13 Pro by going to Settings>About>Software>Build Number and Tap on build number repeatedly so that the Developer mode will turn on.
And then go back and click on Developer options.
In the developer options, there is OEM unlock option then enable that option.
Setup ADB and Fastboot on your PC. Download link: shorturl.at/pyJ16
Install procedure For ADB Fastboot :
1. Launch it That Require administrator privileges.
2. Click Yes to install ADB and Fastboot .
3. Press Yes to install ADB system wide.
4. Click Yes to install Drivers.
5. Continue the Driver installation.
6. 15 seconds passed – it will finish the process
Click to expand...
Click to collapse
Take a backup of the necessary data on the Oukitel K13 Pro as this process will wipe the user data.
Connect your Oukitel K13 Pro to the computer.
Now open a command window by typing CMD to the windows search.
You may get a request to authorize USB debugging on the device, accept it.
Once opened, type the following code to see if your device is detected and authorized.
adb devices
Click to expand...
Click to collapse
If you can see your device then type this command to boot it into the bootloader mode.
adb reboot bootloader
Click to expand...
Click to collapse
Your phone should now be booted into the bootloader, to check if its detected type the following command.
fastboot devices
Click to expand...
Click to collapse
As a result, this will show the serial number of the phone, you are ok to proceed if you can see it, if not, then your drivers are not properly installed on the pc.
Finally, type the command below to unlock the bootloader on the Oukitel K13 Pro.
fastboot flashing unlock
Click to expand...
Click to collapse
Now you should see a confirmation screen on your phone, confirm the unlocking on your phone. This will begin the bootloader unlocking process, which shouldn't last more than a couple of minutes.
Your phone should automatically reboot into android but if not, type this command to reboot it.
fastboot reboot
Click to expand...
Click to collapse
Your phone's bootloader is now unlocked and ready to be patched with Magisk.
Go thru the initial setup and double check in developer settings that the unlock bootloader option is greyed out.
Enable USB debugging again.
Open command window again.
Check that your device is detected by using the command.
adb devices
Click to expand...
Click to collapse
Reboot into the bootloader by using the command.
adb reboot bootloader
Click to expand...
Click to collapse
Download the Magisk patched boot img: shorturl.at/pCIMP
Patch the boot.img by typing the command.
fastboot flash boot magisk_patched.img
Click to expand...
Click to collapse
You can also type the command without the file name and drag the .img file to the command window then press enter.
The flashing process will begin. Once completed, type the following command and press enter:
fastboot reboot
Click to expand...
Click to collapse
Magisk is now patched to your Oukitel K13 Pro, download Magisk Manager on your phone from shorturl.at/hvFK9
You should now see that Magisk is installed, enjoy!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you for these very concrete explanations. You made my day.
: [GUIDE] How to root Oukitel K13 Pro using Magisk [EU version]
Thanks for this idea.
Do you think this will work for the OUKITEL WP5?
totallybeachin said:
Do you think this will work for the OUKITEL WP5?
Click to expand...
Click to collapse
No, you need the boot.img file from your phone and patch it with Magisk. Check Oukitel's website if the firmware for your phone is available.
totallybeachin said:
Do you think this will work for the OUKITEL WP5?
Click to expand...
Click to collapse
This is only for Oukitel K13 Pro.
كيف
كيفك
ارييموجي خاص بالايفون
Related
Original Article : https://www.asus.com/zentalk/tw/thread-177291-1-1.html
[email protected] post the root guild for zenfone 3.
I translate his article to English version.
I didn't try this method yet, but I think it should work.
If you want to root your zenfone 3, you can following this guide to root your device.
============================
[Update] All-in-one zip (unlock App+driver+adb+fastboot+twrp+SuperSU.zip) :
https://github.com/snowwolf725/RootZenfone3/archive/master.zip
Firstly, you should use the following official unlock tool to unlock Boot-loader.
[Update] If you want to receive OTA notify, you should use Un-official bootloader unlock method.
Un-official bootloader unlock method
ZE552KL
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE552KL/ZE552KL_SIGNED_Android_M_UnlockTool_2016_0715.zip
ZE520KL
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE520KL/ZE520KL_SIGNED_Android_M_UnlockTool_2016_0715.zip
After you unlock your device, you can download the TWRP recovery image, and follow the guide to root your device.
TWRP recovery img :https://mega.nz/#F!kl8lmKRL!ZbLvz1b4YgLMr_n09vRrTA
twrp-3.0.2-Z012D.img (TWRP for ZE552KL)
twrp-3.0.2-Z017D.img (TWRP for ZE520KL)
dot.supersu (.supersu)
If your device is ZE552KL, then you should download twrp-3.0.2-Z012D.img + dot.supersu
If your device is ZE520KL, then you should download twrp-3.0.2-Z017D.img + dot.supersu
If you want to build recovery image by yourself, you can clone the git source tree, and compile by yourself.
https://github.com/shakalaca/android_device_asus_ze520kl
https://github.com/shakalaca/android_device_asus_ze552kl
How to root your device:
1. Boot your zenfone 3 to boot-loader mode (you should firstly turn the phone off, then press and hold the volume up and power buttons )
2. Install android tools on your pc. (http://forum.xda-developers.com/showthread.php?t=2588979)
3. Connect your mobile to PC, then use following command to flash TWRP image to your zenfone.
Code:
fastboot flash recovery twrp-3.0.2-xxx.img
4a. Hold the volume down button, and use following command to boot into recovery mode. (if menu appears, please select recovery mode)
Code:
fastboot reboot
4b. Boot your zenfone 3 to recovery mode (you should firstly turn the phone off, then press and hold the volume down and power buttons )
5. After boot into TWRP recovery, select "keep system read only" in TWRP recovery menu.
6. Use following command to push .supersu file into /data .
Code:
adb push dot.supersu /data/.supersu
7. Select "ADB Sideload" in TWRP menu, then use following command to push root files.
(SuperSu.zip http://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703)
Code:
adb sideload SuperSU.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
8. reboot and enjoy your rooted device.
PS. If you got OTA notify, you can flash the stock image to un-root your device.
Stock boot.img and recovery.img files can be find in following URL:
https://mega.nz/#F!ok0V0RIA!5WKtHe98opzjVI3NPbM7Ww
Who can test ?
superuser.pm said:
Who can test ?
Click to expand...
Click to collapse
its 100% working bro
Does the unlock tool really wipe the data on the device??
aelzki said:
Does the unlock tool really wipe the data on the device??
Click to expand...
Click to collapse
yes its wiping entire phone.
can i root the phone without uncloking the bootloader ?
BentotKulangot said:
its 100% working bro
Click to expand...
Click to collapse
Are u trying? 7up screenshot for everybody . ..
superuser.pm said:
Are u trying? 7up screenshot for everybody . ..
Click to expand...
Click to collapse
This is work.. now i have rooted phone and installed xposed
after rooted? we can get OTA? or no? if not how to get the OTA?
i must unlock bootloader before flash twrp ?
on phone turn on or off USB debugging mode ?
100% working
I have been waiting and waiting for this post. worked instantly, with no headaches. Well just remember to back up your stuff first.
Thanks to OP for the translation!
Won't allow me to post the image or link being so new. Just try it out.
drive.google.com/open?id=0B08xanlQWY50UHhEZlBfM1BncWs
sorry mods if this is bypassing the spam guards.
i cant get OTA UPDATES after unlock the bootloader LOL
They do warn you specifically that pushed updates will no longer happen.
I think the solution is to find the updates from ASUS and use an app like FlashFire
There is a request for a Rom on the cyanogen forums.
Xposed worked like a charm.
It also appears that the kernel source is available although I'm not sure from where.
Still not sure where to find the ASUS updates
Thank you very much it works perfect, but how do you flash the recovery.img and boot.img to un-root?
TWRP Decrypted and Couldnt Mount Storage
Thanks for the guide, its 100% worked!
But I have a problem. I couldnt mount storage to instal ZIP file. Also my TWRP said its encrypted, and i dont what password to decrypt is.
Anybody know how to solve this?
Is there any CN stock recovery to download?
i got error device 'null' not found when trying to sideload the supersu. help me please
Chandro-ID said:
i got error device 'null' not found when trying to sideload the supersu. help me please
Click to expand...
Click to collapse
I got this problem too, just install the super su from twrp solved my problem
Will it work for ZS570KL?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tutorials and the tools are not my work, so I don't take any credit. However, the tutorial is come from China. I combine my experience and translate them as much as I can to english.
Instructions:
First, download the root files (at the bottom of this post) accroding to your tablet model (at the back of your tablet) and install the driver in the computer.
Please install in the following order:
1) iSocUSB-Driver-Setup-1.2.0.exe
2) IntelAndroidDrvSetup1.5.0.exe
3) PhoneFlashTool_5.3.4.0_win32.exe
Pay attention to the following points
a) you must install those driver in the above order
b) Don't change the install location of those driver
c) Close your antivirus software to avoid unknow problem
Then, go to Settings>Developer Options>USB Debugging. Enable OEM Unlock and enable USB Debugging Mode
Now, connect your X80 Plus to the computer,
Open a Command Prompt window in "Root X80 Plus H6C3" folder (To open a Command Prompt window in any folder, hold down the shift key and right-click on the folder) and enter the following command
Code:
adb reboot bootloader
Press Enter
Wait for the device to enter fastboot mode
Code:
fastboot oem unlock
Press Enter to unlock the oem and enter the following command
Code:
fastboot flash boot boot.img
Press enter to flash the kernal, then enter the following command
Code:
fastboot reboot
This command will restart your tablet.
It is normal that tablet reboot 3 to 4 times automatically, just wait for it. (turn on the tablet yourself if the tablet do not reboot automatically)
After your device is on, check that Wifi and bluetooth works or not. (Wifi and Bluetooth may not works with the replaced kernal, just perform a factory reset)
If everything is ok, enter the following command
Code:
root.bat
Wait for the Command Prompt until it stuck at this command, "adb shell su --daemon"
Now, disconnect the tablet and reboot it manuly
After the device was booted up, Supersu already become a part of system app.
Open Supersu now, it will notify that the SU binary needs to be updated. You must need to install the binary once, but you will fail at 100%(unless there is a miracle, and your tablet is root successfully, congratulations)
Close Supersu and reconnect the tablet, enter the following command again.
Code:
root.bat
Now the command prompt should run all of the command smoothly and Supersu should have no message about the SU binary update !!
Therefore, if your Supersu shows nothing (works properly), your tablet is rooted, thats amazing.
If Supersu keep notifing, please enter the following command again and wait for it to boot up automatically until Supersu have no message about the binary update.
Code:
root.bat
Note that this root method are not stable yet
Known issues:
1) Old version of Titanium Backup was unable to execute the SU command
2) LBE are not 100% compatible with this root
Post reply if you have any requires or problem.
Stock Rom for X80 Plus just in case you need them, and the instruction will be translated later
H6C3 and H5C5
Root files: H6C3 and H5C5
Sorry for my bad english
Hi and thanks for sharing.
Is there a custom recovery to install?
I would like to install xposed framework, but don't know how to install the zip file...
Thanks
thanks and your thread on teclast's forum where the link was crash, please repair.
Thanks a lot
Can someone confim that this method works?
Jeconxis said:
thanks and your thread on teclast's forum where the link was crash, please repair.
Click to expand...
Click to collapse
You can try to flash xposed using flashify!
woody4165 said:
Hi and thanks for sharing.
Is there a custom recovery to install?
I would like to install xposed framework, but don't know how to install the zip file...
Thanks
Click to expand...
Click to collapse
Working hard on it now
hahaha1111 said:
Working hard on it now
Click to expand...
Click to collapse
looking forward to this!
Thaaanks a lot @hahaha1111 !!! I tried that on my all new H6C4 received this morning with your H6C3 files and anything is working perfectly !!! Many thanks again !!!
BTW: Any way to update SuperSU binary then?
I tried your method on my H5C6 and it worked beautifully. Thank you!
where can I use the file?
I download the file named X80 plus-win10_20160108.7z from the link. what is this, and where can I use it?
hahaha1111 said:
Working hard on it now
Click to expand...
Click to collapse
Hi @hahaha1111
any news on custom recovery?
I would like to install xposed framework, but cannot be done without custom recovery, is it correct?
Thanks
woody4165 said:
Hi @hahaha1111
any news on custom recovery?
I would like to install xposed framework, but cannot be done without custom recovery, is it correct?
Thanks
Click to expand...
Click to collapse
Hiatus
H6C4
Great! It works perfectly on H6C4.
Thanks!
Regards
RoroTiti said:
Thaaanks a lot @hahaha1111 !!! I tried that on my all new H6C4 received this morning with your H6C3 files and anything is working perfectly !!! Many thanks again !!!
BTW: Any way to update SuperSU binary then?
Click to expand...
Click to collapse
It's updated from play market with no problem.
May be it is my particular problem ( kernel 3.14.37 firmware assembly ver 3.03.20161109) but.....
WARNING TO H6C4 OWNERS! SD Card becomes unusable with this rooting files. Any SD Card after rooting recognized as 0,9 Mb size and you can't access files on it. You can't use SD Card reader too.
Please report if you do not encounter this issue.
Hi.
I'm stuck on "adb push SUfiles/Superuser.apk /data/superuser" command in root.bat
I've done all the previous steps without problems.
Before executing root.bat I have set again Usb Debug and OEM Unlock, is it correct?
Sometimes I get stuck on "adb remount"
What can I check?
Thanks
Woody
Starmobile Up Prime
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SOME INFO:
MT6737/M (they seem to be the same thing)
Antutu Score: 30052 [source]
As of Jan 6 2018, latest official firmware is v13 06292017.
A. Root
Disclaimer: YOU ARE DOING THIS AT YOUR OWN RISK. I will not assume any responsibility for your own actions on your phone. Follow the instructions carefully, and ask questions if you're unsure.
Tested way: Magisk Manager patched boot method
Other option: SRS Root reports to root the v12 firmware, though I didn't use this method so I don't know if it works.
Magisk Manager Patched Boot Method
1. Unlock your bootloader (Note: this will factory reset your phone and you will lose all your personal data) To do this:
Enable bootloader unlock inside developer options, accessed by pressing build number 7 times in settings. Thanks @Nao Tomori !
Install adb and fastboot on a computer (Search it, it's available)
Reboot to fastboot mode (Switch off phone, press power and volume up simultaneously. Choose fastboot mode from the menu that appears)
Connect to computer by USB Cable provided
Open a command prompt or terminal and check if fastboot detects your device by typing
Code:
fastboot devices
A device number should appear. If nothing appears, it's a most likely driver problem. Click this button to know more.
Linux doesn't need drivers so try using fastboot in linux. If you really want to do it in windows, try PDANET drivers while connected in fastboot mode. No guarantees. I'm using a linux machine to specifically avoid this hassle
We're now gonna unlock your bootloader. Type
Code:
fastboot oem unlock
and confirm unlock by clicking volume up on your phone.
Reboot and go through all the necessary set-up.2. Download Magisk Manager from here and install the APK.
Make sure you download the latest apk version provided.
Note it says that Magisk itself is not yet installed.
We've only installed the helper app.
3. Flash Patched Boot Image
At this point you have two options: extract and patch your own boot image, or just use my patched boot image. I will assume you pick the second but this REQUIRES that you are on the same v13 06292017 official firmware. PM me if you want to do the first one. Download my patched boot image.
Download
Move the file to a known location that's easy to type (home directory or C Drive)
Reboot to fastboot mode, same as before
Flash with fastboot then reboot
Code:
fastboot flash boot /path/to/patched_boot.img
Code:
fastboot reboot
CONGRATS! Magisk should now be installed and along with it, Magisk's Superuser
Press thanks if it helped you! And/or leave feedback if it worked for you, and if your setup differed from mine. Thanks
MODS
B. Mods
1. Xposed Framework (systemless)
Install Xposed framework from within Magisk. Install API24.
Then reboot. This first boot takes really long. I pulled out my battery once, then the next time it successfully booted after a while.
Install topjohnwu's Xposed apk from his systemless Xposed thread.
It will tell you that Xposed is installed but not active yet.
Reboot one last time
2. Dolby Atmos (systemless)
Install from within Magisk. Confirmed working!
RECOVERY
Reserved
If you get fail operation
If you get
Code:
FAILED (remote:
Unlock operation is not allowed
)
Just go to Developer Settings > OEM Unlocking and enable it.
I used PDAnet for Windows and it worked
Nao Tomori said:
If you get
Code:
FAILED (remote:
Unlock operation is not allowed
)
Just go to Developer Settings > OEM Unlocking and enable it.
I used PDAnet for Windows and it worked
Click to expand...
Click to collapse
Oh yes, I forgot about that! Thanks. Will add and credit you
hi there bro. i just want to know, is there a custom rom that we can use for this phone? i have the same exact phone but i cannot find any articles about any other custom roms that has been used on this phone. hoping to hear from you. thanks.
And another thing, can we use TWRP for this phone?
Hello. Is there anyone here who has a clean stock rom for Starmobile UP Prime? The phone keeps popping up ads and redirecting to chrome/google play. Contact names sometimes disappear too. I ran the malwarebytes app and it said that "Settings" app is the malware. I downloaded and flashed another rom before (I forgot from what website), but same experience. Hoping for helpful response.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Supports RMX2051 only
Note: The full kernel sources are available in the link below!
https://github.com/realme-kernel-opensource/realmeX50-kernel-source
Hello Fans of realme X50 5G,
Want to unlock your bootloader? Here is the step-by-step guide you have been waiting for - but please make sure to read the disclaimer too so you will know what to expect!
Keep in mind that the process of unlocking the bootloader will be referred to as in-depth test in the tutorial.
First, please read the “Disclaimer” carefully.
【Disclaimer】
1. After unlocking your phone ALL OF YOUR DATA WILL BE ERASED! Backup before you proceed.
2. In-depth test may have unforeseeable impacts on your phone.
3. Some functions may not operate properly because of third-party firmware, such as the photo-taking function of the camera. It may also cause device damage.
4. Personal and confidential information on phone may leak, and security may be compromised.
5. In-depth test may modify some of the system functions, and prevent you from updating the system version to enjoy the latest ColorOS.
Second, read the steps below for the in-depth test
Preparation:
realme X50 5G - with 60%+ battery
1 x USB Cable
1 x PC / MacBook
Step 1. Make sure you have backed up your data, unlocking your phone will erase all of your data.
Step 2. Make sure your system version is the official and latest one.
Step 3. Download and install the unlock tool apk on your phone.
View attachment DeepTesting_realme_X50.apk
Install it to apply for the bootloader unlock via the tool.
Step 4. Follow the detailed steps below to unlock the bootloader.
#1. enable developer options
Settings > About Phone > Build Number
tap the Build Number option 7 times
#2 unlock oemlock
Settings > other settings> developer mode
#3Open unlock tool.
#4. Click “Start applying”.
#5. Please read the disclaimer in detail, select the checkbox, and submit your application.
The application will be checked by our servers.
Within approximately 1 hour, the unlock tool apk will show the status of the unlock request - if it shows the unlocking is successful, please proceed to the following step.
Download and install the fastboot tool on your PC or MacBook (check this https://www.xda-developers.com/google-releases-separate-adb-and-fastboot-binary-downloads/), use a cable to connect phone and PC. In Fastboot mode use engineering command in the picture below to unlock
- Enter the command: adb reboot bootloader
- Press “Enter”on your keyboard
- Enter the command: fastboot flashing unlock
- Press “Enter”on your keyboard
https://forum.xda-developers.com/attachment.php?attachmentid=5137189&stc=1&d=1605631133/IMG]
FAQ
Q1: How to relock the bootloader?
#1. Download the unlock tool again to apply to exit the in-depth test.
[IMG]https://forum.xda-developers.com/attachment.php?attachmentid=5137187&stc=1&d=1605631133
Q2: Are there any risks after unlocking the bootloader?
Please be aware that realme cannot guarantee the full functionality, and will not be responsible, for any third-party unsigned custom ROM being flashed onto your device after the bootloader is unlocked. An unsigned third-party custom ROM may not have gone through the thorough tests that we run for each device and software version that we release.
A third-party custom ROM may not work properly on your device, and certain functions and services may cease to work. The performance and device data may also be affected, and may damage the device permanently. In the worst case, unlocking bootloader will cause physical injuries or material damage for ex. due to device overheating.
Q3: Will it affect future OTAs after unlocking?
Secure user data partition may also become inaccessible and you will not be able to get official software upgrades if you unlock the bootloader. Once re-locked the bootloader, users will receive official OTAs again.
Q4: Will it affect warranty?
Warranty will be fully applied to problems caused by realme 3 unlocking or flashing a custom ROM.
Q5: How to flash back the official ROM after installing a custom ROM?
Users need to go to a service center to flash the device FREE of charge.
Hello there, Thank you for your detailed explanation for unlocking bootloader for Realme X50 5G.
I used to download the deeptest apk from other website, but the result was not successful. The deeptest app said "my device is not supported."
My device model is RMX2025. And my quick question is this deeptest app will support RMX2025, won't it?
siamese007 said:
Hello there, Thank you for your detailed explanation for unlocking bootloader for Realme X50 5G.
I used to download the deeptest apk from other website, but the result was not successful. The deeptest app said "my device is not supported."
My device model is RMX2025. And my quick question is this deeptest app will support RMX2025, won't it?
Click to expand...
Click to collapse
This app supports RMX2051.
I received my realme x50 5g yesterday and it was already updated.
My model is RMX2144. It is the European version right?
Will the application work on this model? Thank you!!
totmakina said:
I received my realme x50 5g yesterday and it was already updated.
My model is RMX2144. It is the European version right?
Will the application work on this model? Thank you!!
Click to expand...
Click to collapse
I am not sure about the model RMX2144. May you try it and give us the feedback?
Hello! I have version RMX 2025, the application says that the phone is not supported
Craaazy said:
Hello! I have version RMX 2025, the application says that the phone is not supported
Click to expand...
Click to collapse
That's the sad story. Right now I found no deep testing app that supports RMX2025. So hopeless for this model. :crying::crying:
I have RMX2051 but when I install the deep testing apk, it opens and then the app closes immediately. Any idea why this happens?
Notes:
- OEM unlock is enabled
- All permissions for the app are enabled and I also restarted my phone but it still crashes
- USB debugging is enabled (though this isn't relevant for opening the app)
Could it be because I'm on Android 11 and this apk only supports Android 10?
If no solution.... what is the purpose of the deeptesting application? What would happen if I just skip this step and proceed to the fastboot tool step with the PC?
.gif of trying to open it: https://ibb.co/F3ym46B
wongx said:
I have RMX2051 but when I install the deep testing apk, it opens and then the app closes immediately. Any idea why this happens?
Notes:
- OEM unlock is enabled
- All permissions for the app are enabled and I also restarted my phone but it still crashes
- USB debugging is enabled (though this isn't relevant for opening the app)
Could it be because I'm on Android 11 and this apk only supports Android 10?
If no solution.... what is the purpose of the deeptesting application? What would happen if I just skip this step and proceed to the fastboot tool step with the PC?
.gif of trying to open it: https://ibb.co/F3ym46B
Click to expand...
Click to collapse
It is possible that your deeptesting app does not support Android 11 as you assumed. If you fail to run deeptesting and unlock your phone, your fastboot commands to manipulate the system will not work. That means you cannot skip deeptesting step for unlocking purpose. Another possiblility is Realme changed their mind and canceled unlocking all models of X50 5G. So there is no possible deeptesting app available for X50 5G again.
Anyways if you do intend to unlock your RMX2051, there are a couple methods that may work:
1. Downgrade your Android 11 to Android 10 by flashing tool to flash official firmware of Android 10. Or any possible ways to do this.
2. Try factory reset and install and run deeptesting app again.
3. Search and download deeptesting app for Android 11, if this may exist.
Hope one of this works.
All i can find are tutorials for the Neo and Pro versions of this device. Can this version be rooted? How?
recovery sideload+magisk
alekksander said:
recovery sideload+magisk
Click to expand...
Click to collapse
Hey, thanks for the reply. I'm still new, can you elaborate? Maybe possibly link a tut? Appreciate it regardless.
alekksander said:
recovery sideload+magisk
Click to expand...
Click to collapse
What is recovery sideload?
useroso987 said:
What is recovery sideload?
Click to expand...
Click to collapse
Well, don't get me wrong, but if that's all unknown to you ... you'd better don't root your device ;-).
The risk to brick your device or open unforseen security wholes is quite too large, you'd better read some tutorials about flashing roms and customizations before trying to get into the world of Magisk.
Cheers
Kurt
Kurt Krummbein said:
Well, don't get me wrong, but if that's all unknown to you ... you'd better don't root your device ;-).
The risk to brick your device or open unforseen security wholes is quite too large, you'd better read some tutorials about flashing roms and customizations before trying to get into the world of Magisk.
Cheers
Kurt
Click to expand...
Click to collapse
Well, i've been reading past days...
I've installed Delta Magisk through adb on Lineage OS 20. It was quite a fast and interesting process!
Thank you.
Kurt Krummbein said:
Well, don't get me wrong, but if that's all unknown to you ... you'd better don't root your device ;-).
The risk to brick your device or open unforseen security wholes is quite too large, you'd better read some tutorials about flashing roms and customizations before trying to get into the world of Magisk.
Cheers
Kurt
Click to expand...
Click to collapse
Instead of being helpful you give some strange lessons it seems to me that you are useless here. If someone asks you politely for help, explain it to them. Every phone unlocks differently.
Kasjopea73 said:
Instead of being helpful you give some strange lessons it seems to me that you are useless here. If someone asks you politely for help, explain it to them.
Click to expand...
Click to collapse
Well, i tried to figure out, that not knowing the basics of running the phones recovery and using sideload is a bad starting point to open root access on the device.
Kasjopea73 said:
Every phone unlocks differently.
Click to expand...
Click to collapse
Well, that's not the core of my answer and i do not disagree ... just wanted to prevent a newbee from bricking his device and not beeing able to recover ;-) or walking around with a spy-phone recording and sharing his whole live-data with someone who should not know anything of it at all.
@Kasjopea73 : if you volonteer to answer request like "i tryied to root and bricked my device" in personal chat, then it's ok ... i've seen too many chats on other devices beeing flooded by those kind of requests, rendering these chats useless for developers who tried to exchange information on fixing problems.
Ciao
Kurt
Kurt Krummbein said:
Well, i tried to figure out, that not knowing the basics of running the phones recovery and using sideload is a bad starting point to open root access on the device.
Well, that's not the core of my answer and i do not disagree ... just wanted to prevent a newbee from bricking his device and not beeing able to recover ;-) or walking around with a spy-phone recording and sharing his whole live-data with someone who should not know anything of it at all.
@Kasjopea73 : if you volonteer to answer request like "i tryied to root and bricked my device" in personal chat, then it's ok ... i've seen too many chats on other devices beeing flooded by those kind of requests, rendering these chats useless for developers who tried to exchange information on fixing problems.
Ciao
Kurt
Click to expand...
Click to collapse
The best thing to do is not to write anything anymore, you are no help here and it is better to disappear. This is a forum for development, not for throwing obstacles under someone's feet. Rooting this phone is trivial, just extract the boot.img from the rom you are using, not from any other, and in magisk make a patch, instructions you will find below the post. If you don't know what is going on don't write nonsense to anyone.
Instructions Steps: Unlock Bootloader and RootPlatform Tools:
For Windows:
Download File: Download
For macOS
Download File: Download
For Linux
Download File: Download
At first, you need to connect your device to PC via USB cable.
Next, head over to the platform-tools folder, then you have to type in CMD in the address bar and click enter. Command Prompt window will popup.
Now type the below command to boot your device into fast boot mode:
adb reboot bootloader
Next, you will need to get your device-specific unlock token. For that, execute the below command:
fastboot oem get_unlock_data
You will now get an alphanumeric character, that you have to copy all of the codes without the bootloader prefix. To follow this step, you may copy all the commands, paste it in a Notepad, and then delete the bootloader prefix. Further, make sure that there isn’t any space between any line of codes.
Now go to Motorola Unlock page and sign-in with your account. After this, copy that code and paste that into provided space. Then tap on the “Can my device be unlocked button”
Then, you will receive a Unique Key on your email. In normal scenerio, the code usually takes a few minutes to reach your email. But if not wait for few more minutes and you will get the code.
Go back the command prompt window and execute the below command. In the following command replace the UNIQUE_KEY with the key that you have received from Motorola.
fastboot oem unlock UNIQUE_KEY
Your bootloader is unlocked, after the whole process is done which will take few minutes. Now if your device doesn’t reboot to the system then you can use the below command to do it manually.
fastboot reboot
CONGRATULATIONS! YOU HAVE UNLOCKED THE BOOTLOADER OF YOUR DEVICE. NOW LET’S PROCEED TO ROOT THE DEVICE
2. ROOT MOTOROLA EDGE 30, PLUS ecc......Thera are two ways root motorola edge plus: one is flashing SuperSu Zip with TWRP Recover and another one patching the boot.img file. Currerntly, there is no TWRP Recovery for motorola edge plus, so we will be choosing the latter (patching) option.
Instructions Steps:
First download the stock firmware and extract the firmware file. Now search the stock boot file which would be named as boot.img. Copy this file to your Motorola edge plus.
Install Magisk Manager which you have downloaded earlier.
After installation, open magisk manager and tap on Install > Install > Select and Patch file (Here you have to select the boot.img file)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Magisk will start the patching process which will take just a few seconds.
After the patching process is done, you should see the magisk_patched.img in your internal storage’s Downloads folder.
Now you have to transfer magisk_patched.img to your platform-tools folder. Open CMD in this folder by searching “CMD” in the address bar and hit Enter.
Connect Motorola edge plus with PC via USB Cable and type the following command:
adb reboot bootloader
Now you have to flash magisk_patched.img and for that type the following command:
fastboot flash boot magisk_patched.img
The process will take only a few seconds. Once its complete, you may reboot your device via the following command:
fastboot reboot
Now you can open magisk manger and very the root as well.
CONGRATULATIONS! YOU HAVE SUCCESSFULLY ROOTED YOUR MOTOROLA EDGE PLUS.
There is another solution for making Root on Telegram groups. Unlock the bootloader and install TWRP then Magisk.
I did this as described, it works fine. I tried a couple of days with root and stock ROM but revert back to the original because of google wallet that didn't work suddenly.
hans3103 said:
I did this as described, it works fine. I tried a couple of days with root and stock ROM but revert back to the original because of google wallet that didn't work suddenly.
Click to expand...
Click to collapse
SafetyNet fix install