Related
/!\DO IT ON YOUR OWN RISK/!\
Recently, Nokia made us happy by fulfilling their promise to update our Nokia 6 to Android Pie. It's very exciting until you find out there is no way to root or even use TWRP on this device when Pie is installed.
Worry not, I've found a way to install TWRP and root our Nokia 6 using Magisk. Follow the guides below!
/!\ WARNING! This process requires you to unlock your Nokia 6 bootloader first. Bootloader unlock isn't officially available nor supported yet, so it is paid and MOST LIKELY you would have to downgrade your device first to Oreo with older security patch to unlock it (which requires more cash)
OK, if you are ready, proceed to next two threads for TWRP installations and root
=====================
Required files download:
• TWRP 3.2.3-0 patched for Nokia 6 Pie
https://drive.google.com/open?id=1zsiTSIHyA_WyH7f-z7mxQwISlVft4aNv
• Magisk Manager 6.1.0
https://mega.nz/#!EDoy1azB!l8DKdSrpZFmxOBankQIMmbID5xjylIGizA5m0rpLxZI
• Magisk v17.1
https://github.com/topjohnwu/Magisk/releases/download/v17.1/Magisk-v17.1.zip
=====================
• TWRP 3.2.3-0 install or boot guide •
> To install (replaces the stock recovery)
=======================
/!\ TWRP installs on today standards' phones are strongly discouraged by the community. To be safe, always mod your Android device when your modding companion devices - be it a PC or a laptop, are nearby and connectable to your phone. After all, it's up to you to install the TWRP or not. /!\
=======================
• Download the TWRP image from the link provided in the OP.
• Put your phone into fastboot mode
• Use the " fastboot flash recovery recovery_mod.img " command
• Done!
> To just boot (preserve stock recovery)
• Download the TWRP image from the link provided in the OP.
• Put your phone into fastboot mode
• Use the " fastboot boot recovery_mod.img " command
• Done! It should be booted to TWRP now.
/!\DO IT ON YOUR OWN RISK/!\
• Root guide (untested) •
• Download both the Magisk Manager apk and the Magisk installer zip from the link in OP. Place it into your phone's internal storage.
• Install the Magisk Manager apk (you have to install the Manager first)
• Boot into TWRP (guide on above thread) or reboot to recovery (if you flashed TWRP, again the guide is on above thread)
• Back up your boot partition first (strongly recommended, but not mandatory)
• Flash the Magisk installer zip
• Wipe dalvik and cache, if needed.
• Reboot
• Done!
/!\DO IT ON YOUR OWN RISK/!\
Not worked for me my bootloader is unlocked and i flashed this twrp on my ta- 1021 but it's not booting up on twrp
Emmykay223 said:
Not worked for me my bootloader is unlocked and i flashed this twrp on my ta- 1021 but it's not booting up on twrp
Click to expand...
Click to collapse
/!\ WARNING! This process requires you to unlock your Nokia 6 bootloader first. Bootloader unlock isn't officially available nor supported yet ...
/!\
SamuSZ said:
/!\ WARNING! This process requires you to unlock your Nokia 6 bootloader first. Bootloader unlock isn't officially available nor supported yet ...
/!\
Click to expand...
Click to collapse
Bootloader is already unlocked ..
Thanks for your contribution! This should also work on TA-1000/1003 and all the Nokia 5.
hikari_calyx said:
Thanks for your contribution! This should also work on TA-1000/1003 and all the Nokia 5.
Click to expand...
Click to collapse
It's not working for me how i can do this please reply me
Emmykay223 said:
Not worked for me my bootloader is unlocked and i flashed this twrp on my ta- 1021 but it's not booting up on twrp
Click to expand...
Click to collapse
welp, i already said it's the safest to just boot to TWRP via fastboot than flashing it into your phone, so you can test it whether if it's booting before flashing.
xaedoplay.modder.xda said:
welp, i already said it's the safest to just boot to TWRP via fastboot than flashing it into your phone, so you can test it whether if it's booting before flashing.
Click to expand...
Click to collapse
Oky so i have tried it's not Booting
Thanks for your concern ??
Emmykay223 said:
Oky so i have tried it's not Booting
Thanks for your concern ??
Click to expand...
Click to collapse
maybe you can take a look at twrp.me and look after Nokia 6
some people reported that the official TWRP works
You are my hero! :highfive:
Thank you so much! It works very fine!
xaedoplay.modder.xda said:
maybe you can take a look at twrp.me and look after Nokia 6
some people reported that the official TWRP works
Click to expand...
Click to collapse
I think i should reinstall my android pie and then i should install twrp again hope it will work for me
xaedoplay.modder.xda said:
maybe you can take a look at twrp.me and look after Nokia 6
some people reported that the official TWRP works
Click to expand...
Click to collapse
As u can see my bootloader is unlocked
Emmykay223 said:
I think i should reinstall my android pie and then i should install twrp again hope it will work for me
Click to expand...
Click to collapse
Yes but my device is showing "failed to find device partition" any idea about it?
---------- Post added at 07:18 PM ---------- Previous post was at 07:17 PM ----------
xaedoplay.modder.xda said:
/!\DO IT ON YOUR OWN RISK/!\
Recently, Nokia made us happy by fulfilling their promise to update our Nokia 6 to Android Pie. It's very exciting until you find out there is no way to root or even use TWRP on this device when Pie is installed.
Worry not, I've found a way to install TWRP and root our Nokia 6 using Magisk. Follow the guides below!
/!\ WARNING! This process requires you to unlock your Nokia 6 bootloader first. Bootloader unlock isn't officially available nor supported yet, so it is paid and MOST LIKELY you would have to downgrade your device first to Oreo with older security patch to unlock it (which requires more cash)
OK, if you are ready, proceed to next two threads for TWRP installations and root
=====================
Required files download:
• TWRP 3.2.3-0 patched for Nokia 6 Pie
https://drive.google.com/open?id=1zsiTSIHyA_WyH7f-z7mxQwISlVft4aNv
• Magisk Manager 6.1.0
https://mega.nz/#!EDoy1azB!l8DKdSrpZFmxOBankQIMmbID5xjylIGizA5m0rpLxZI
• Magisk v17.1
https://github.com/topjohnwu/Magisk/releases/download/v17.1/Magisk-v17.1.zip
=====================
Click to expand...
Click to collapse
Why my device is showing me "failed to find device partition" in my recovery menu. Any idea about it?
Will it work on my Nokia x7?
I've not seen anything about Nokia rooting on xda before this,
So, first of all thank you so much for the great effort.
Can I use this on my Nokia x7.
Help: how to unlock bootloader?
Hey Bro just guide a little bit, I know how to go back to Nougat/Oreo from Pie. after going back to Nougat can I unlock my bootloader simply by using this command 'fastboot oem unlock' or I will have to buy bootloader?
Nouman112 said:
Hey Bro just guide a little bit, I know how to go back to Nougat/Oreo from Pie. after going back to Nougat can I unlock my bootloader simply by using this command 'fastboot oem unlock' or I will have to buy bootloader?
Click to expand...
Click to collapse
Nope you can try methods to unlock bootloader but i will suggest you to buy bootloader key from techmesto .
I have purchased the key from techmesto then i unlocked my bootloader. you can run this command to unlock your phone's bootloader.
Fastboot flash unlock (key.bin)
Then fastboot oem unlock-go
Emmykay223 said:
Nope you can try methods to unlock bootloader but i will suggest you to buy bootloader key from techmesto .
I have purchased the key from techmesto then i unlocked my bootloader. you can run this command to unlock your phone's bootloader.
Fastboot flash unlock (key.bin)
Then fastboot oem unlock-go
Click to expand...
Click to collapse
I actually don't wanna buy any other suggestion?
Nouman112 said:
I actually don't wanna buy any other suggestion?
Click to expand...
Click to collapse
You can search how to unlock bootloader of nokia 6 in search options you will know how to do it
Hi Community.
Is possibile to root stock firmware v30c?
Android 10 Q
Brand TIM (Italy)
I found on xda a list of patched boot.img but outdated (v20x)
My last experience on rooting/custom rom flashing was about 3 years ago with Samsung Note 3 and odin software; these "new" procedures are harder for my understanding.
Thank you for your attention
have you unlocked bootloader ?
I used this method. My firmware is Open EU 30f.
[ROOT][MAGISK][OREO/PIE] Magisk 18.0+
Magisk 18.0+ for the LG G7 ThinQ This is a collection of Magisk pre-patched/pre-rooted Boot images i made for the LG G7 ThinQ European model (G710EM). This thread will also guide you how to If you happened to have a G7 ThinQ (G710EM) or any...
forum.xda-developers.com
Emanel000000 said:
have you unlocked bootloader ?
Click to expand...
Click to collapse
Hi Emanuel,
Yes I have, Thank you
clitheroe1 said:
I used this method. My firmware is Open EU 30f.
[ROOT][MAGISK][OREO/PIE] Magisk 18.0+
Magisk 18.0+ for the LG G7 ThinQ This is a collection of Magisk pre-patched/pre-rooted Boot images i made for the LG G7 ThinQ European model (G710EM). This thread will also guide you how to If you happened to have a G7 ThinQ (G710EM) or any...
forum.xda-developers.com
Click to expand...
Click to collapse
Hi clitheroe1,
Thank you very much.
I'll try it soon.
I flashed an Open EU stock rom (v30b) last summer because TIM is so much slow with updates, but I don't want to see imei/firmware error message on boot anymore.
spqromanni said:
Hi Emanuel,
Yes I have, Thank you
Click to expand...
Click to collapse
1. Install magisk manager
2. Boot into 9008 mode
3. Backup your boot_a image using Qfil (Read data)
4. Copy it to your phone
5. Rename it to boot_a.img
6. Go in magisk manager —-> install —-> Select and patch an image —-> select the image.
7. Copy the patched boot image file to your PC (its located in downloads folder in your phone)
8. Flash it with fastboot/qfil ( fastboot flash boot_a < drag and drop over the cmd the image > // select boot_a and load image in qfil)
Anyone have a root method for the BLU V50? Thanks in advance
Look inside here:
Root Spreadtrum Devices via Magisk Patched boot.img
This guide will show you the steps to root your Spreadtrum device via Magisk patched boot.img file, which we will extract from PAC firmware.
www.droidwin.com
jwoegerbauer said:
Look inside here:
Root Spreadtrum Devices via Magisk Patched boot.img
This guide will show you the steps to root your Spreadtrum device via Magisk patched boot.img file, which we will extract from PAC firmware.
www.droidwin.com
Click to expand...
Click to collapse
jwoegerbauer said:
Look inside here:
Root Spreadtrum Devices via Magisk Patched boot.img
This guide will show you the steps to root your Spreadtrum device via Magisk patched boot.img file, which we will extract from PAC firmware.
www.droidwin.com
Click to expand...
Click to collapse
I managed to find a way. Lol I'm just going to have to squeeze the old brain to to get this done it looks like. Thanks for the tip. The methods provided all require a system dump of stock firmware to patch TWRP for the phones recovery partition. I may have to cross my fingers and flash the generic unofficial boot image TWRP for android 10 and hope it fits lol. There are absolutely no custom fits at the moment. Of course I accepted the security patch update which made this a bit more tricky. QP1A.190711.020. I found a thread talking about almost the same update except it was two digits more than the version I got. It's been 6 or 7 years since I stopped theming for the galaxy s3. Course I was only changing xmls and pngs for custom roms back then. None of my old team are active anymore. Team Venum and team nOObz are long history. I even lost my log in info for my old profile. Anyways. Wish me luck. I'm going to learn how to port and develope this time around.
jwoegerbauer said:
Look inside here:
Root Spreadtrum Devices via Magisk Patched boot.img
This guide will show you the steps to root your Spreadtrum device via Magisk patched boot.img file, which we will extract from PAC firmware.
www.droidwin.com
Click to expand...
Click to collapse
Hello. Thanks again in advance. I've tried several command prompt methods to unlock this boot loader with no luck including the Magisk method. I have however managed to patch the TWRP file.
jwoegerbauer said:
Look inside here:
Root Spreadtrum Devices via Magisk Patched boot.img
This guide will show you the steps to root your Spreadtrum device via Magisk patched boot.img file, which we will extract from PAC firmware.
www.droidwin.com
Click to expand...
Click to collapse
I managed to patch the TWRP boot image using the Magisk apk and patch tools but I have no luck unlocking the boot loader..
1. find your firmware file by searching this forum for blu stock firmware repository
2. extract your boot/recovery img file using spd flash tool
3. patch img file with magisk, re-sign it with avbtools
4. patch vbmeta file with avbtools
5. re-flash both vbmeta and boot/recovery using spd research tool
rooted my blu advance l5 with these steps learned from hovatek. ymmv
luridphantom said:
1. find your firmware file by searching this forum for blu stock firmware repository
2. extract your boot/recovery img file using spd flash tool
3. patch img file with magisk, re-sign it with avbtools
4. patch vbmeta file with avbtools
5. re-flash both vbmeta and boot/recovery using spd research tool
rooted my blu advance l5 with these steps learned from hovatek. ymmv
Click to expand...
Click to collapse
Can anyone quickly tell me the easiest way to brick this device? My wife will buy me a new phone "when this one stops working"
Did anyone manage to root this device without bricking it? Firmware is not available in the Blu Repo (at least not yet). Our team would love to find a workable method for this phone. We have access to a bunch and want to be able to run Linux Deploy on them and also write app to automatically reboot the phone if the network connectivity is loss.
Hey, I was able to figure out how to deal with this bootloader stuff after many hours of work
Give this thread a look, it pretty much details every step needed to unlock the bootloader: https://forum.hovatek.com/thread-32287.html
Keep in mind that the OP of that thread is using a way older version of fastboot. For me, r26.0.1 worked best:
Windows: https://dl.google.com/android/repository/platform-tools_r26.0.1-windows.zip
Mac: https://dl.google.com/android/repository/platform-tools_r26.0.1-darwin.zip
Linux: https://dl.google.com/android/repository/platform-tools_r26.0.1-linux.zip
The above step is essential as newer versions of fastboot do NOT have the "fastboot flashing unlock_bootloader <bin>" step
again YMMV, but good luck
Me again, 6 hrs after the fact
Trial and Error enabled root on the V50 - follow these steps
1. Unlock bootloader as above
2. Create a custom signed vbmeta https://forum.hovatek.com/thread-32664.html (I used the same .pem from https://forum.hovatek.com/thread-32287.html to do this) - Make sure the VBMETA IS ANDROID 10 despite G0350WW firmware saying it's Android 9
3. Create custom boot with magisk (plenty of instructions to do this online, go with the github instructions)
4. Sign the custom magisk boot with THE SAME PUB KEY FROM STEP 2
5. Flash your new vbmeta and boot onto your phone via fastboot
6. Reboot, hope and pray it turns on
This is what worked for me, but again YMMV.
njoaquin said:
Me again, 6 hrs after the fact
Trial and Error enabled root on the V50 - follow these steps
1. Unlock bootloader as above
2. Create a custom signed vbmeta https://forum.hovatek.com/thread-32664.html (I used the same .pem from https://forum.hovatek.com/thread-32287.html to do this) - Make sure the VBMETA IS ANDROID 10 despite G0350WW firmware saying it's Android 9
3. Create custom boot with magisk (plenty of instructions to do this online, go with the github instructions)
4. Sign the custom magisk boot with THE SAME PUB KEY FROM STEP 2
5. Flash your new vbmeta and boot onto your phone via fastboot
6. Reboot, hope and pray it turns on
This is what worked for me, but again YMMV.
Click to expand...
Click to collapse
to be clear, the v50 uses the same firmware as the g50 plus?
dtingley11222 said:
to be clear, the v50 uses the same firmware as the g50 plus?
Click to expand...
Click to collapse
Correct, you can see it when you go to the firmware details of the v50 itself. You can get the firmware files when you search this forum for blu stock firmware repository
V50 is essentially a re-wrapped g50
njoaquin said:
Correct, you can see it when you go to the firmware details of the v50 itself. You can get the firmware files when you search this forum for blu stock firmware repository
V50 is essentially a re-wrapped g50
Click to expand...
Click to collapse
Hey, is there any way you could get me a rooted image and signed vbmeta? I have all the information that you would need, I just can't do the steps because im stupid. I would pay you to do it if you wanted
If the BLU V50 uses the same stock rom as the blu g50, if someone were to give out their patched vb meta and boot img, wouldn't it work for anyones BLU V50 if they just flashed it?
dtingley11222 said:
If the BLU V50 uses the same stock rom as the blu g50, if someone were to give out their patched vb meta and boot img, wouldn't it work for anyones BLU V50 if they just flashed it?
Click to expand...
Click to collapse
you need to patch recovery flash it back using the spreadtrum research tool and use the key combo to boot into root
luridphantom said:
you need to patch recovery flash it back using the spreadtrum research tool and use the key combo to boot into root
Click to expand...
Click to collapse
If I unlock the Bootloader, could I just flash it back with Fastboot?
Just tried flashing recovery and it bricked my phone
dtingley11222 said:
If I unlock the Bootloader, could I just flash it back with Fastboot?
Click to expand...
Click to collapse
you cant unlock the bootloader. follow this tutorial or you'll keep bricking your v50
How to create a custom signed vbmeta.img for Unisoc using AVBtool
If you're into rooting and flashing custom recoveries then Android Verified Boot (AVB) or dmverity is something you should be aware of. We'd dropped a blog post on why dmverity could be causing your p
forum.hovatek.com
luridphantom said:
you cant unlock the bootloader. follow this tutorial or you'll keep bricking your v50
How to create a custom signed vbmeta.img for Unisoc using AVBtool
If you're into rooting and flashing custom recoveries then Android Verified Boot (AVB) or dmverity is something you should be aware of. We'd dropped a blog post on why dmverity could be causing your p
forum.hovatek.com
Click to expand...
Click to collapse
Actually you can unlock the Bootloader. I already did. I don't know how to follow that tutorial. If I gave you my boot and vbmeta could you do it for me?
https://drive.google.com/file/d/1q1vt6f6-0Wg6iF4prOJS2o9ZauWM4qNy/view?usp=sharing : vbmeta
https://drive.google.com/file/d/1gEV2jxhnmmjKuUaqVhqPnH9oZNmzZBGi/view?usp=sharing : boot
dtingley11222 said:
Actually you can unlock the Bootloader. I already did. I don't know how to follow that tutorial. If I gave you my boot and vbmeta could you do it for me?
Click to expand...
Click to collapse
oh weird i thought blu doesnt even support bootloader unlocking
can you access fastboot? with an unlocked bootloader you can flash an empty vbmeta and dont have to go through the above steps
As said in the title, I can't start my v50 in fastboot, the command 'adb reboot bootloader' reboots the phone but it just goes to android. i'm using the latest korean firmware. Has anyone had this issue before?
There is no way to reach fastboot mode on LG V50 Korean version. You need abl_a eng file to do that. Follow this link:
Guide LG G8/G8x/v50 Bootloader Unlock and Magisk Root using Firehose
Disclaimer: I am not responsible for any problems from using this guide. Works for G8, G8s, G8x, and v50 Confirmed working on G8 and v50 Requirements: Android 10 QFIL...
forum.xda-developers.com
sptw said:
There is no way to reach fastboot mode on LG V50 Korean version. You need abl_a eng file to do that. Follow this link:
Guide LG G8/G8x/v50 Bootloader Unlock and Magisk Root using Firehose
Disclaimer: I am not responsible for any problems from using this guide. Works for G8, G8s, G8x, and v50 Confirmed working on G8 and v50 Requirements: Android 10 QFIL...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks ! this is exactly what I needed. I'm going to try to install twrp recovery now
gambon0120 said:
Thanks ! this is exactly what I needed. I'm going to try to install twrp recovery now
Click to expand...
Click to collapse
The best way to install TWRP on V50 Korean version is using Magisk.
Follow this thread :
[UNOFFICIAL][TWRP][Recovery] TWRP 3.3.1-0
1 . unlock BootLoader AND Root https://forum.xda-developers.com/v50-thinq/development/lg-v50-temp-root-exploit-via-cve-2020-t4098077 2. Download the required files ( twrp-installer-v3.3.1-V50_ab.zip ) 3.Install the corresponding TWRP flash...
forum.xda-developers.com
Remember : in this thread pay attention on iten #4, otherwise you are going to stuck with blocked twrp. See the video to learn the trick.
sptw said:
The best way to install TWRP on V50 Korean version is using Magisk.
Follow this thread :
[UNOFFICIAL][TWRP][Recovery] TWRP 3.3.1-0
1 . unlock BootLoader AND Root https://forum.xda-developers.com/v50-thinq/development/lg-v50-temp-root-exploit-via-cve-2020-t4098077 2. Download the required files ( twrp-installer-v3.3.1-V50_ab.zip ) 3.Install the corresponding TWRP flash...
forum.xda-developers.com
Remember : in this thread pay attention on iten #4, otherwise you are going to stuck with blocked twrp. See the video to learn the trick.
Click to expand...
Click to collapse
What does he mean by 'Re-swipe the Magisk 20.4 card package'?
gambon0120 said:
What does he mean by 'Re-swipe the Magisk 20.4 card package'?
Click to expand...
Click to collapse
Install again.
sptw said:
Install again.
Click to expand...
Click to collapse
Got it! Twrp is running and I was able to flash lineage OS! Perfect =)
Thanks for all the help, I'm not sure I could have done it without your help. By the way, do you happen to know a good version of gcam for the v50?
gambon0120 said:
Got it! Twrp is running and I was able to flash lineage OS! Perfect =)
Thanks for all the help, I'm not sure I could have done it without your help. By the way, do you happen to know a good version of gcam for the v50?
Click to expand...
Click to collapse
Sorry not to help you on it. I use stock camera. Join to the LG V50 - G8 Thinq - G8S Think group on telegram. There are a lot of information about gcam there. People are very friendly there.
Hi Guys, i can put my device Lg v50 in edl mode with adb? Or Lock bootloader ? My phone not entry in edl mode. I receive every time that my phone restart "your device software cannot be checked for a corruption. Lock Theo bootloader" and i use The phone for seconds and The phone restart
Hello, I have the SM-A127M.
I have been able to do the following:
1.Unlock the Bootloader.
2. Root with Magisk.
But I want to follow this Guide "Installing TWRP and LInageOS" and I have the following questions:
1. Is it possible to install LineageOS on SM-A127M?
2. Is there a version of TWRP for Android 11 on the SM-A127M? Download a version to install with Odin as AP from here: https://eu.dl.twrp.me/a12/
But the only thing it did was go into an infinite loop in Download mode. Lucky that I was able to unbrick it by flashing the full firmware.
3. Is the reason for switching to LineageOS to improve the phone's performance, do those who already have it really feel an improvement in performance or is it the same as using it with Stock Android from Samsung?
Thank you for your answers.
Don't bother bro, nobody responds to the A127M variant, I got the same phone and a few post before yours i wonder to a custom rom and no one reply.
Dark_Cristian said:
Don't bother bro, nobody responds to the A127M variant, I got the same phone and a few post before yours i wonder to a custom rom and no one reply.
Click to expand...
Click to collapse
I think so. Have you tried this model using the installation guides on the forum to install TWRP and/or LineageOS? Have they worked for you? Have they failed you? It does not matter if it is for this specific model.
Thanks in advance.
geocamus said:
I think so. Have you tried this model using the installation guides on the forum to install TWRP and/or LineageOS? Have they worked for you? Have they failed you? It does not matter if it is for this specific model.
Thanks in advance.
Click to expand...
Click to collapse
no my mate, I don't do that for fear to brick the device 'cause it's my main phone and the backup phone have a issue with the battery. Thanks for the suggest.
I have the same phone, but i searched for a12s(sm-a127f) because the specs are the same
The physwizz dev have all on his channel. Twrp kernel etc... I've tried the twrp for this phone and it works well.
Oneplus# said:
The physwizz dev have all on his channel. Twrp kernel etc... I've tried the twrp for this phone and it works well.
Click to expand...
Click to collapse
Would you be so kind as to post the link? I can't seem to find it. :/
onlotus said:
Would you be so kind as to post the link? I can't seem to find it. :/
Click to expand...
Click to collapse
Sure https://t.me/a12schat . It's on telegram.
geocamus said:
Hello, I have the SM-A127M.
I have been able to do the following:
1.Unlock the Bootloader.
2. Root with Magisk.
But I want to follow this Guide "Installing TWRP and LInageOS" and I have the following questions:
1. Is it possible to install LineageOS on SM-A127M?
2. Is there a version of TWRP for Android 11 on the SM-A127M? Download a version to install with Odin as AP from here: https://eu.dl.twrp.me/a12/
But the only thing it did was go into an infinite loop in Download mode. Lucky that I was able to unbrick it by flashing the full firmware.
3. Is the reason for switching to LineageOS to improve the phone's performance, do those who already have it really feel an improvement in performance or is it the same as using it with Stock Android from Samsung?
Thank you for your answers.
Click to expand...
Click to collapse
Hello I have the SM-A127M Android 12 no the Android 11
geocamus said:
Hello, I have the SM-A127M.
I have been able to do the following:
1.Unlock the Bootloader.
2. Root with Magisk.
But I want to follow this Guide "Installing TWRP and LInageOS" and I have the following questions:
1. Is it possible to install LineageOS on SM-A127M?
2. Is there a version of TWRP for Android 11 on the SM-A127M? Download a version to install with Odin as AP from here: https://eu.dl.twrp.me/a12/
But the only thing it did was go into an infinite loop in Download mode. Lucky that I was able to unbrick it by flashing the full firmware.
3. Is the reason for switching to LineageOS to improve the phone's performance, do those who already have it really feel an improvement in performance or is it the same as using it with Stock Android from Samsung?
Thank you for your answers.
Click to expand...
Click to collapse
Twrp is fine but LineageOS no dont you cant call or text at all sometimes the sim isnt recognised even mention it in the sub reddit and everyone screams at you to download the official even though it happens on official builds
Try installing this custom and unofficial twrp for A12 Nacho.
https://androidfilehost.com/?w=files&flid=330751
[ODIN] If you couldn't install it on AP, try to install it on BL.
(No need to disable vbmeta I guess cuz I installed it on my a127m and my phone just booted normal)