Database Info

[ROM][7.1.2] LineageOS-eXtended [26 FEB 2018]

Disclaimer
Code:
[COLOR="gray"]
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired [B]because the alarm app failed[/B].
* Please do some research if you have any concerns about features included
* in the products you find here before flashing it!
* YOU are choosing to make these modifications.
*/
[/COLOR]
Prerequisites for Installation
- Must have an unlocked bootloader
- Update TWRP to Android-7.1 builds located here. Please make sure to use the recovery image which is appropriate for your device (Thor or Apollo).
Fresh Installation
- Backup your existing ROM first
- Wipe the /data partition (but you can keep the media storage)
- Flash the ROM File
- Flash Open Gapps: use an ARM 7.1 version smaller than the "full" size to make sure it fits
- Reboot
- Enjoy!
LineageOS-eXtended Downloads
LineageOS Builds for Thor (ggow)
LineageOS Builds for Apollo (ggow)
Gapps
- Open Gapps (use a size smaller than "Full" to make sure it fits)
NOTE: Here's what I do to solve the "Play Games" side load issue... Anytime I update my GApps zip file:
- I download the "full" and "mini" versions of GApps
- Extract the "GApps/playgames-arm.tar.lz" file from the "full" file and add it to the "GApps" folder of the "mini" file.
- Open the installer.sh script in the "mini" file and move the "playgames" line from the full_gapps_list= section into the mini_gapps_list= section
- I use this modified "mini" .zip when flashing CM-14.1 ROMs so that my Play Games install always works.
Source Code (branch: cm-14.1)
- LineageOS-eXtended
- Kernel Source
- Common Device Tree
- Thor Device Tree
- Apollo Device Tree
Credits
- LineageOS Team
- Cyanogenmod Team
- LineageOS-eXtended Team
- CodeAurora
- ggow
- Cpasjuste
- dpeddi
XDA:DevDB Information
LineageOS-eXtended, ROM for the Amazon Kindle Fire HDX 7" & 8.9"
Contributors
ggow
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader, TWRP
Based On: CyanogenMod
Version Information
Status: Testing
Created 2018-02-28
Last Updated 2018-02-28

closed per OP request

[RECOVERY][OFFICIAL][Cereus][v3.0.0] Pitch Black Recovery [TWRP 3.4.0]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
*Disclaimer
*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Introduction
Pitch Black Recovery is a fork of TWRP with many improvements to make your experience better. It's more flexible & easy to use.
Based on TWRP version: 3.4.0
PitchBlack version: 3.0.0
For device: Cereus
Maintainer/Authors build: Erwin Abs
PitchBlack Source Code: https://github.com/PitchBlackRecoveryProject
Kernel: https://github.com/xiaomi-mt6765
PitchBlack Team: @rezaadi0105, @shovon, @manjot.gni, @androiabledroid, sagar
Features
Fully native android like UI
Supports Treble and non-Treble ROMs
Up-to-date kernel, built from sources
Full dark theme with changeable accents
Reorganized menus
MIUI OTA support
Disable DM Verity
Use AromaFM as default file manager
Various tools are include
Universal flash-able file for all variant of a device
Many bug fixes & optimization & much more
Click to expand...
Click to collapse
Installation Instructions
From previous version or other recovery
Download the PitchBlack zip to your device
Reboot to your current custom recovery
Flash the PitchBlack zip
The device will automatically reboot into PitchBlack Recovery after installation
Enjoy
From PC
Download PitchBlack Recovery flashable zip from bellow
Extract the PBRP zip
Goto fastboot mode in your device
Flash the recovery.img by fastboot flash recovery.img
Boot into PBRP
Copy the zip to internal storage
Flash it
Enjoy
Changelog
PBRP Side Changelog
Code:
v3.0.0
- Fully Redesigned UI
- Added new Keychecks While Flashing PBRP or recovery.img or Ramdisk
- Fully Redesigned Website https://pitchblackrecovery.com
- New Android like Power Menu (Activated via power key hold)
- Flashlight toggled by Vol up(+) on hold
- New Scrollable Advanced menu
- Totally Redesigned Icons
- Removed old unnecessary Theming Stuff
- Tested on almost all handy Resolutions
- Flashlight toggle on Lockscreen
- More checks for SAR/Non-SAR
- New Navbar
- Support on almost all Android version (5.0+)
- Update ozip decrypt
- Fix up ozip print logs & take all paths
- Update FUNDING.yml
- Fixed encrypted removal checks & buttons
- Add Flag for disabling treble compatibility by default
- Is_Data_Wiped: Simplify function signature
- Unified AB_OTA_UPDATER
- Change AB device log storage to /data/recovery
- Delay start if specified in board
- Optimize touchscreen driver initialization delay.
v3.0
- Update kernel
- Update DM Verity Logic
- Update magisk
- Update unroot magisk
- Some bug fixed
Device Side Changelog
Code:
Bugs
- You tell me!
Downloads
Flashable zip
https://pitchblackrecovery.com/cereus
XDA:DevDB Information
PitchBlack Recovery Project, Tool/Utility for the Xiaomi Redmi 6
Contributors
Erwin Abs
Version Information
Status: Stable
Created 2020-10-29
Last Updated 2020-10-30

Notes: specifically in miui based on android 9!! (not recommended on oreo base firmware)
If you were on Twrp before Just Install flashable zip and press volume up for automatic reboot

I want process to flash the recovery to my device. My phone got Hard bricked because of arb protection. Can i get help? Please

Aadharsh.1 said:
I want process to flash the recovery to my device. My phone got Hard bricked because of arb protection. Can i get help? Please
Click to expand...
Click to collapse
Flash recovery.img stock miui oreo from fastboot

Erwin Abs said:
Flash recovery.img stock miui oreo from fastboot
Click to expand...
Click to collapse
No. I mean that i got hard bricked. No recovery, no fastboot, dead screen with constantly vibration (non stop). I got repaired my phone from the service centre since edl was blocked. I want do not want to get bricked again. I just want to know how do you flash it. Some says to flash it normally (fastboot flash recovery.img), some says to flash dummy.img for arb bypass, some says to boot the recovery(fastboot boot recovery.img) and flash the recovery from the recovery itself. I am just confused here. I don't want to get bricked again. I just want to know how did you flash without any problem. ARB protection is the main problem here. I tried to flash PB recovery. The fastboot command says it was successful and when i reboot to recovery, only stock recovery was there. So i tried to flash twrp(official one from twrp page), i got bricked cause of arb.

Can I install twrp on miui 11.0.5.0 android 9. I am afraid the phone will get bricked

sayad1 said:
Code:
/*
*Disclaimer
*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
introduction
Pitch Black Recovery is a fork of TWRP with many improvements to make your experience better. It's more flexible & easy to use.
Based on TWRP version: 3.2.3
PitchBlack version: 2.9.0
For device: tulip
Maintainer/Authors build: @rezaadi0105 @sayad1
PitchBlack Source Code: https://github.com/PitchBlackRecoveryProject
Device tree: https://github.com/rezaadi0105/android_device_xiaomi_tulip-twrp
[*]Kernel: Give kernel link here, remove this line if you are using prebuilt kernel
[*]PitchBlack Team: @rezaadi0105, @firewolfxda, @manjot.gni, @androiabledroid, Arbaz Khan
Features
Installation Instructions
From previous version or other recovery
Download the PitchBlack zip to your device
Reboot to your current custom recovery
Flash the PitchBlack zip
The device will automatically reboot into PitchBlack Recovery after installation
Enjoy
from PC (Windows & Linux)
Download PBRP PC Installer zip from bellow
Download PitchBlack Recovery flashable zip from bellow
Extract the PBRP PC installer zip & copy the flashable zip to the installer folder
Goto fastboot mode in your device
Windows users open pbinstaller.bat file
Linux users execute pbinstaller.sh in a terminal
Follow the introductions on the installer from there
Enjoy
(LInux users will need unzip, adb & fastboot installed on their system)
changelog
Code:
v2.9.0
- Update kernel
- Update DM Verity Logic
- Update magisk
- Update unroot magisk
- Some bug fixed
flashable zip
download link here
2019.1.27
https://sourceforge.net/projects/pi...lip-2.9.0-20181211-1618-OFFICIAL.zip/download
Telegram :- https://t.me/tulipofficial
pC INSTALLER
https://sourceforge.net/projects/pi...ller/PB_Installer_20181014_ALPHA.zip/download
Click to expand...
Click to collapse
Erwin Abs said:
Flash recovery.img stock miui oreo from fastboot
Click to expand...
Click to collapse
Erwin Abs said:
Code:
/*
*Disclaimer
*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Introduction
Pitch Black Recovery is a fork of TWRP with many improvements to make your experience better. It's more flexible & easy to use.
Based on TWRP version: 3.4.0
PitchBlack version: 3.0.0
For device: Cereus
Maintainer/Authors build: Erwin Abs
PitchBlack Source Code: https://github.com/PitchBlackRecoveryProject
Kernel: https://github.com/xiaomi-mt6765
PitchBlack Team: @rezaadi0105, @shovon, @manjot.gni, @androiabledroid, sagar
Features
Installation Instructions
From previous version or other recovery
Download the PitchBlack zip to your device
Reboot to your current custom recovery
Flash the PitchBlack zip
The device will automatically reboot into PitchBlack Recovery after installation
Enjoy
From PC
Download PitchBlack Recovery flashable zip from bellow
Extract the PBRP zip
Goto fastboot mode in your device
Flash the recovery.img by fastboot flash recovery.img
Boot into PBRP
Copy the zip to internal storage
Flash it
Enjoy
Changelog
PBRP Side Changelog
Code:
v3.0.0
- Fully Redesigned UI
- Added new Keychecks While Flashing PBRP or recovery.img or Ramdisk
- Fully Redesigned Website https://pitchblackrecovery.com
- New Android like Power Menu (Activated via power key hold)
- Flashlight toggled by Vol up(+) on hold
- New Scrollable Advanced menu
- Totally Redesigned Icons
- Removed old unnecessary Theming Stuff
- Tested on almost all handy Resolutions
- Flashlight toggle on Lockscreen
- More checks for SAR/Non-SAR
- New Navbar
- Support on almost all Android version (5.0+)
- Update ozip decrypt
- Fix up ozip print logs & take all paths
- Update FUNDING.yml
- Fixed encrypted removal checks & buttons
- Add Flag for disabling treble compatibility by default
- Is_Data_Wiped: Simplify function signature
- Unified AB_OTA_UPDATER
- Change AB device log storage to /data/recovery
- Delay start if specified in board
- Optimize touchscreen driver initialization delay.
v3.0
- Update kernel
- Update DM Verity Logic
- Update magisk
- Update unroot magisk
- Some bug fixed
Device Side Changelog
Code:
Bugs
- You tell me!
Downloads
Flashable zip
https://pitchblackrecovery.com/cereus
XDA:DevDB Information
PitchBlack Recovery Project, Tool/Utility for the Xiaomi Redmi 6
Contributors
Erwin Abs
Version Information
Status: Stable
Created 2020-10-29
Last Updated 2020-10-30
Click to expand...
Click to collapse
Please reply soon for my problem i have posted already. I am depending on your method

Aadharsh.1 said:
introduction
Pitch Black Recovery is a fork of TWRP with many improvements to make your experience better. It's more flexible & easy to use.
Based on TWRP version: 3.2.3
PitchBlack version: 2.9.0
For device: tulip
Maintainer/Authors build[email protected]
PitchBlack Source Code: https://github.com/PitchBlackRecoveryProject
Device tree: https://github.com/rezaadi0105/android_device_xiaomi_tulip-twrp
Kernel: Give kernel link here, remove this line if you are using prebuilt kernel
PitchBlack Teamrezaadi0105, @firewolfxda, @manjot.gni, @androiabledroid, Arbaz Khan
Features
Installation Instructions
From previous version or other recovery
Download the PitchBlack zip to your device
Reboot to your current custom recovery
Flash the PitchBlack zip
The device will automatically reboot into PitchBlack Recovery after installation
Enjoy
from PC(Windows & Linux)
Download PBRP PC Installer zip from bellow
Download PitchBlack Recovery flashable zip from bellow
Extract the PBRP PC installer zip & copy the flashable zip to the installer folder
Goto fastboot mode in your device
Windows users open pbinstaller.bat file
Linux users execute pbinstaller.sh in a terminal
Follow the introductions on the installer from there
Enjoy
(LInux users will need unzip, adb & fastboot installed on their system)
changelog
Introduction
Pitch Black Recovery is a fork of TWRP with many improvements to make your experience better. It's more flexible & easy to use.
Based on TWRP version: 3.4.0
PitchBlack version: 3.0.0
For device: Cereus
Maintainer/Authors build: Erwin Abs
PitchBlack Source Code: https://github.com/PitchBlackRecoveryProject
Kernel:https://github.com/xiaomi-mt6765
PitchBlack Teamrezaadi0105, @shovon, @manjot.gni, @androiabledroid, sagar
Features
Installation Instructions
From previous version or other recovery
Download the PitchBlack zip to your device
Reboot to your current custom recovery
Flash the PitchBlack zip
The device will automatically reboot into PitchBlack Recovery after installation
Enjoy
From PC
Download PitchBlack Recovery flashable zip from bellow
Extract the PBRP zip
Goto fastboot mode in your device
Flash the recovery.img by fastboot flash recovery.img
Boot into PBRP
Copy the zip to internal storage
Flash it
Enjoy
Changelog
PBRP Side Changelog
Please reply soon for my problem i have posted already. I am depending on your method
Click to expand...
Click to collapse
Just install zip, only for firmware miui Pie

tranluc123 said:
Can I install twrp on miui 11.0.5.0 android 9. I am afraid the phone will get bricked
Click to expand...
Click to collapse
This has been tested on Miui Pie firmware

Aadharsh.1 said:
No. I mean that i got hard bricked. No recovery, no fastboot, dead screen with constantly vibration (non stop). I got repaired my phone from the service centre since edl was blocked. I want do not want to get bricked again. I just want to know how do you flash it. Some says to flash it normally (fastboot flash recovery.img), some says to flash dummy.img for arb bypass, some says to boot the recovery(fastboot boot recovery.img) and flash the recovery from the recovery itself. I am just confused here. I don't want to get bricked again. I just want to know how did you flash without any problem. ARB protection is the main problem here. I tried to flash PB recovery. The fastboot command says it was successful and when i reboot to recovery, only stock recovery was there. So i tried to flash twrp(official one from twrp page), i got bricked cause of arb.
Click to expand...
Click to collapse
if you are on twrp LR mod just install zip and press volume up to reboot into auto recovery

Erwin Abs said:
Flash recovery.img stock miui oreo from fastboot
Click to expand...
Click to collapse
Erwin Abs said:
if you are on twrp LR mod just install zip and press volume up to reboot into auto recovery
Click to expand...
Click to collapse
I am on stock rom. Does nothing happenes if i just flash normally? Also do i need to flash any zips like disable force encryption, lazyflasher,etc after successfully flashed PB

Erwin Abs said:
This has been tested on Miui Pie firmware
Click to expand...
Click to collapse
Then can you root android 9 miui 11.0.5.0?

Beta Build UP
Changelog:
- Initial Unified Redmi 6/6A
- Add Arm64 Support
- Drop Critical Partitions
- Based on TWRP 3.5.2
- Decrypt Need TEST.
https://sourceforge.net/projects/pbrp/files/cactus/PBRP-cactus-3.1.0-20210817-0331-BETA.zip/download

Aadharsh.1 said:
No. I mean that i got hard bricked. No recovery, no fastboot, dead screen with constantly vibration (non stop). I got repaired my phone from the service centre since edl was blocked. I want do not want to get bricked again. I just want to know how do you flash it. Some says to flash it normally (fastboot flash recovery.img), some says to flash dummy.img for arb bypass, some says to boot the recovery(fastboot boot recovery.img) and flash the recovery from the recovery itself. I am just confused here. I don't want to get bricked again. I just want to know how did you flash without any problem. ARB protection is the main problem here. I tried to flash PB recovery. The fastboot command says it was successful and when i reboot to recovery, only stock recovery was there. So i tried to flash twrp(official one from twrp page), i got bricked cause of arb.
Click to expand...
Click to collapse
I also facing this issue now. I flash two different ROMs and no one boot up, so i think if it is related to recovery issue, and i downloaded twrp.img and flash it via PB and restart to new recovery. And now it keeps vibration. I'll try to find a way to maye it survive, but i cant stop it from vibrating. its really noisy.

Jackboy2 said:
I also facing this issue now. I flash two different ROMs and no one boot up, so i think if it is related to recovery issue, and i downloaded twrp.img and flash it via PB and restart to new recovery. And now it keeps vibration. I'll try to find a way to maye it survive, but i cant stop it from vibrating. its really noisy.
Click to expand...
Click to collapse
Even when I flashed twrp in Redmi Y2/S2, the phone got bricked. But the phone can boot twrp successfully. So i just flashed a custom rom.
Anyways, i gave up both the phones and bought a new one. I flashed xiaomi.eu and I'm satisfied with that.

Jackboy2 said:
I also facing this issue now. I flash two different ROMs and no one boot up, so i think if it is related to recovery issue, and i downloaded twrp.img and flash it via PB and restart to new recovery. And now it keeps vibration. I'll try to find a way to maye it survive, but i cant stop it from vibrating. its really noisy.
Click to expand...
Click to collapse
Well, idk but i think the only way to revive the phone is to flash the rom in edl mode with sp flash tool. Just remove your back cover, disconnect the fingerprint and battery. Now open the sp flash tool and select the rom to be flashed and it will wait for the device to connect.
Now hold volume down and connect the usb to enter into edl mode.
But the problem is, Xiaomi blocked the access for edl flashing. You'll require an auth file and authorised mi account.
I tried this tutorial a way long back. Maybe now there could be a way to bypass with a modified auth file.

Jackboy2 said:
I also facing this issue now. I flash two different ROMs and no one boot up, so i think if it is related to recovery issue, and i downloaded twrp.img and flash it via PB and restart to new recovery. And now it keeps vibration. I'll try to find a way to maye it survive, but i cant stop it from vibrating. its really noisy.
Click to expand...
Click to collapse
There was a crack available for snapdragon phones which disables mi account to flash the rom.
But the mediatek phones are hopeless. You have to take it to the service centre.

Aadharsh.1 said:
There was a crack available for snapdragon phones which disables mi account to flash the rom.
But the mediatek phones are hopeless. You have to take it to the service centre.
Click to expand...
Click to collapse
Something interesting, after it vibrate til battery dead, i connect it to PC and try to flash it via SP, and it boot up, also can go to fastboot.
So i flash PB back and flash Los, now its working perfectly.
Thanks for your reply

[UNOFFICIAL] PitchBlack Recovery Project 3.1.0 | PitchBlack Recovery Project (PBRP) | Realme 2 Pro (RMX1801)

Mod edit: Thread closed as duplicate of
[UNOFFICIAL] PitchBlack Recovery Project 3.1.0 | PitchBlack Recovery Project | PBRP | Realme 2 Pro (RMX1801)
Note - I'm Not Responsible for bricked devices *Disclaimer *We are not responsible for any issues that arrive on your device just because of this recovery Introduction Pitch Black Recovery is a fork of TWRP with many improvements to make your...
forum.xda-developers.com
View attachment 5312133
Note - I'm Not Responsible for bricked devices​
Code:
*Disclaimer
*We are not responsible for any issues that arrive on your device just because of this recovery
Introduction
Pitch Black Recovery is a fork of TWRP with many improvements to make your experience better. It's more flexible & easy to use.
Based on TWRP version: 3.5
PitchBlack version: 3.1
For device: Realme 2 Pro (RMX1801)
Maintainer/Authors build: @sree_govind_s_a
Installation Instructions
From previous version or other recovery
Download the PitchBlack zip to your device
Reboot to your current custom recovery
Flash the PitchBlack zip
The device will automatically reboot into PitchBlack Recovery after installation
Enjoy
From PC
Download PitchBlack Recovery flashable zip from bellow
Extract the PBRP zip
Goto fastboot mode in your device
Flash the recovery.img by fastboot flash recovery.img
Boot into PBRP
Copy the zip to internal storage
Flash it
Enjoy
*Bugs
- Nothing found till now
Thanks
- @allworkdone (For Helping and Teaching me new stuffs)

[ROM][OFFICIAL][13.0][Galaxy Note 10/+/+ 5G] crDroid [AOSP][ENCRYPTION]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
crDroid for Samsung Galaxy Note 10/+/+ 5G [d1&d2s&d2x]
Please read whole post before downloading
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
What is this?
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today.
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camera
Bluetooth
Fingerprint reader
Face unlock
NFC
Lights
Sound / vibration
FP gestures
Known issues
VoLTE/VoWIFI - not working for most Samsung devices, so no fix in the near future
You tell me​Download: (Always Download the latest)
ROM (d1) (d2s) (d2x)
Recovery (d1) (d2s) (d2x)
Magisk (Download from here)
Gapps - (Download from here) (Use MindTheGapps-13.0.0-arm64*.zip)
First time installation:
The same instructions as for installing official LineageOS apply, so the ones found here.
You CAN NOT install this ROM using TWRP.
You need to use the crDroid Recovery or the Official Lineage Recovery provided by Linux4.
Installing crDroid Recovey (BL already unlocked):​Odin:
Rename the downloaded .img to recovery.img and add it to a .tar archive using, for example, 7Zip
Flash the resulting .tar file in Odin
Installing The ROM From crDroid Recovery:
crDroid Recovery - Factory reset > Factory reset & reset system partitions
Make sure that all your zip ready for install via OTG/SD card/ADB
crDroid Recovery - Apply update > Choose from sdcard > select the rom and install it
Install magisk .zip (change magisk.apk to magisk.zip if you installing via SD card/OTG)
Reboot to system!
Version Information
Status: Official
Current Version: January (13.0.0_r20)
Stable Release Date: 13/01/2023
Device Maintainer: @Jubscleisson
Sources&Trees
ROM Source: (Link)
Device tree: (d1) (d2s) (d2x)
Common device tree: (Link)
Kernel: (Link)
Vendor: (d1) (d2s) (d2x)
Credits
@Linux4 - For making the trees and officialy maintaing them in LineageOS, For giving me access to A13 device tree and helping me all time!
Visit official website @ crDroid.net
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs
Support Group Link​

Thank you for this rom.
Is it encrypted or not please ?

bayad said:
Thank you for this rom.
Is it encrypted or not please ?
Click to expand...
Click to collapse
You're welcome, sir
This version has the encryption working perfectly, to avoid any problems, I ask you to use the recovery of the ROM itself

Jubscleisson said:
You're welcome, sir
This version has the encryption working perfectly, to avoid any problems, I ask you to use the recovery of the ROM itself
Click to expand...
Click to collapse
Thank you for your answer.
About the recovery you are talking about, does it have backup/restore functions like TWRP ?

Hello @Jubscleisson
Many thanks for your efforts.
Does the Rom include Gcam?
How is the sound for music/youtube playback?
Kind regards,

When the One UI 5 coming?

Anyone has any print screens? option menu and so on?pls

bayad said:
Thank you for your answer.
About the recovery you are talking about, does it have backup/restore functions like TWRP ?
Click to expand...
Click to collapse
It doesn't.

bayad said:
Thank you for your answer.
About the recovery you are talking about, does it have backup/restore functions like TWRP ?
Click to expand...
Click to collapse
No, this function does not exist. Even because data partition isn't supposed to be mounted in a recovery anyways.
I ask that you make backups with an app that is convenient for you, something like Swift Backup or use Google's backup service (if you use GApps).

Jubscleisson said:
No, this function does not exist. Even because data partition isn't supposed to be mounted in a recovery anyways.
I ask that you make backups with an app that is convenient for you, something like Swift Backup or use Google's backup service (if you use GApps).
Click to expand...
Click to collapse
I'm already using Swift Backup for my apps but it's annoying that I need to reconfigure every rom settings when switching between roms

The recovery d2s checksum is not right.
When I give this command: heimdall flash --Recovery.img --no-reboot
I get the following error:
ERROR: Partition "Recovery" does not exist in the specified PIT.
Ending session...
Releasing device interface...
Any idea what can happen?

Cosque said:
The recovery d2s checksum is not right.
When I give this command: heimdall flash --Recovery.img --no-reboot
I get the following error:
ERROR: Partition "Recovery" does not exist in the specified PIT.
Ending session...
Releasing device interface...
Any idea what can happen?
Click to expand...
Click to collapse
partition name is --RECOVERY, not --Recovery
the complete command is heimdall flash --RECOVERY recovery.img --no-reboot
Hope this helps

I've already load the crDroid Recovery, I want to be 100% sure of the next steps, as I understand:
1) Format data / factory reset
2) Format system partition
1 and 2 or only 1 ?

Cosque said:
I've already load the crDroid Recovery, I want to be 100% sure of the next steps, as I understand:
1) Format data / factory reset
2) Format system partition
1 and 2 or only 1 ?
Click to expand...
Click to collapse
Both.

PlayStore does not connect to the Internet with: MindTheGapps-13.0.0-arm64-20221025_100653.zip
Using Core from here https://sourceforge.net/projects/nikgapps/files/Releases/NikGapps-T/28-Aug-2022/ works well
Thanks for the rom!

Thank you very much for this rom, it is amazing but I have a problem:
I can't mount the system as read/write to block some services.
can you check for this please??

Jubscleisson said:
crDroid for Samsung Galaxy Note 10/+/+ 5G [d1&d2s&d2x]
Please read whole post before downloading
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
What is this?
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today.
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camera
Bluetooth
Fingerprint reader
Face unlock
NFC
Lights
Sound / vibration
FP gestures
Known issues
VoLTE/VoWIFI - not working for most Samsung devices, so no fix in the near future
You tell me​Download: (Always Download the latest)
ROM (d1) (d2s) (d2x)
Recovery (d1) (d2s) (d2x)
Magisk (Download from here)
Gapps - (Download from here) (Use MindTheGapps-13.0.0-arm64*.zip)
First time installation:
The same instructions as for installing official LineageOS apply, so the ones found here.
You CAN NOT install this ROM using TWRP.
You need to use the crDroid Recovery or the Official Lineage Recovery provided by Linux4.
Installing crDroid Recovey (BL already unlocked):​Odin:
Rename the downloaded .img to recovery.img and add it to a .tar archive using, for example, 7Zip
Flash the resulting .tar file in Odin
Installing The ROM From crDroid Recovery:
crDroid Recovery - Factory reset > Factory reset & reset system partitions
Make sure that all your zip ready for install via OTG/SD card/ADB
crDroid Recovery - Apply update > Choose from sdcard > select the rom and install it
Install magisk .zip (change magisk.apk to magisk.zip if you installing via SD card/OTG)
Reboot to system!
Version Information
Status: Official
Current Version: November 2022 (13.0.0_r13)
Stable Release Date: 06/12/2022
Device Maintainer: @Jubscleisson
Sources&Trees
ROM Source: (Link)
Device tree: (d1) (d2s) (d2x)
Common device tree: (Link)
Kernel: (Link)
Vendor: (d1) (d2s) (d2x)
Credits
@Linux4 - For making the trees and officialy maintaing them in LineageOS, For giving me access to A13 device tree and helping me all time!
Visit official website @ crDroid.net
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs
Support Group Link​
Click to expand...
Click to collapse
This is the best version I have found for dx2 I have had no failures and a perfect install running all sorts of apps its very fast and well put together
I will make a donation shortly keep up the great work
Thanks
Tom

Jubscleisson said:
crDroid for Samsung Galaxy Note 10/+/+ 5G [d1&d2s&d2x]
Please read whole post before downloading
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
What is this?
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today.
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camera
Bluetooth
Fingerprint reader
Face unlock
NFC
Lights
Sound / vibration
FP gestures
Known issues
VoLTE/VoWIFI - not working for most Samsung devices, so no fix in the near future
You tell me​Download: (Always Download the latest)
ROM (d1) (d2s) (d2x)
Recovery (d1) (d2s) (d2x)
Magisk (Download from here)
Gapps - (Download from here) (Use MindTheGapps-13.0.0-arm64*.zip)
First time installation:
The same instructions as for installing official LineageOS apply, so the ones found here.
You CAN NOT install this ROM using TWRP.
You need to use the crDroid Recovery or the Official Lineage Recovery provided by Linux4.
Installing crDroid Recovey (BL already unlocked):​Odin:
Rename the downloaded .img to recovery.img and add it to a .tar archive using, for example, 7Zip
Flash the resulting .tar file in Odin
Installing The ROM From crDroid Recovery:
crDroid Recovery - Factory reset > Factory reset & reset system partitions
Make sure that all your zip ready for install via OTG/SD card/ADB
crDroid Recovery - Apply update > Choose from sdcard > select the rom and install it
Install magisk .zip (change magisk.apk to magisk.zip if you installing via SD card/OTG)
Reboot to system!
Version Information
Status: Official
Current Version: November 2022 (13.0.0_r13)
Stable Release Date: 06/12/2022
Device Maintainer: @Jubscleisson
Sources&Trees
ROM Source: (Link)
Device tree: (d1) (d2s) (d2x)
Common device tree: (Link)
Kernel: (Link)
Vendor: (d1) (d2s) (d2x)
Credits
@Linux4 - For making the trees and officialy maintaing them in LineageOS, For giving me access to A13 device tree and helping me all time!
Visit official website @ crDroid.net
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs
Support Group Link​
Click to expand...
Click to collapse
Thank you very much for your amazing work.
crDroid the best rom ever
Is there a minimum firmware requirements to boot this rom ?
Now I'm on HVE5.

The NFC and fast charging are not working. Does anyone have them working?
Any idea?

请问当前版本相比之前的版本是续航有明显提升，还是刷屏时间有明显提升。另一个问题是是否有任何内核可用于提高设备的电池寿命

[ROM][A13] RiceDroid 10.1 | Obbattu UNOFFICIAL [AOSP] Pixel4/4Xl - [Flame|Coral]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ricedroid for Pixel4/4XL [Flame/Coral]
What is riceDroid?
* RiceDroid is an opensource android operating system that aims to bring the necessary system modifications while being neat, stable and fast.
What is RiseUI?
* RiseUI is the name for our firmware skin/user interface.
Terminology
* The RICE in the project refers to rice(food) itself, but in a sense it is indeed the term RICING in linux.
Based on Android 13 | Obbattu
What's working?
Almost everything
What's working? aka Firmware issues
FIX "Device Health Services Adapter keeps stopping"
Please root and delete the old apk version on your device, then change and download the latest apk to work properly
DeviceHealthService_1.25.0.apk
Tell Me
DOWNLOAD LINKS : RiceDroid
First Time Install / Clean Flash from Another ROM
1. Reboot to Fastboot
2. Flash boot.img
3. Go to Recovery Mode
4. Go to "Apply Update - Adb Sideload"
5. Flash the ROM
6.FORMAT DATA . (Requires full backup of internal storage) ignore any error
7. Reboot to System and #KeepRiceDroid
Update / Dirty Flash
1. Reboot to Fastboot
2. Flash boot.img
3. Go to Recovery Mode
4. Go to "Apply Update - Adb Sideload"
5. Flash the ROM
6. Reboot to System and #KeepRiceDroid​
Android OS version: 13.0.0_r20​
Security patch level: January 2023​
Build author/Device Maintainer: Bolaramy​
Device source code: https://github.com/RiceDroid-devices​
Firmware source code: github.com​
Firmware created by: The riceDroid Team​
Thanks 🅣🅞🅝🅨 donate to maintain the server to build this ROM​
More: Our Telegram Channel​

Dev_Member said:
riceDroid for Pixel4/4XL [Flame/Coral]
What is riceDroid?
* RiceDroid is an opensource android operating system that aims to bring the necessary system modifications while being neat, stable and fast.
What is RiseUI?
* RiseUI is the name for our firmware skin/user interface.
Terminology
* The RICE in the project refers to rice(food) itself, but in a sense it is indeed the term RICING in linux.
Based on Android 13 | Obbattu
What's working?
Almost everything
What's working? aka Firmware issues
Tell Me
Download links: GoogleDriver
First Time Install / Clean Flash from Another ROM
1. Reboot to Fastboot
2. Flash boot.img
3. Go to Recovery Mode
4. Go to "Apply Update - Adb Sideload"
5. Flash the ROM
6.FORMAT DATA . (Requires full backup of internal storage) ignore any error
7. Reboot to System and #KeepRiceDroid
Update / Dirty Flash
1. Reboot to Fastboot
2. Flash boot.img
3. Go to Recovery Mode
4. Go to "Apply Update - Adb Sideload"
5. Flash the ROM
6. Reboot to System and #KeepRiceDroid
Android OS version: 13
Security patch level: 28/01/2023
Build author/Device Maintainer: BolAalex
Device source code: BolAalex
Firmware source code:https://github.com/ricedroidOSS
Firmware created by: The riceDroid Team
Click to expand...
Click to collapse
What are the benefits of running this compared to say... Pixel Experience or CrDroid?

LuckyTheCoder said:
What are the benefits of running this compared to say... Pixel Experience or CrDroid?
Click to expand...
Click to collapse
Let's try according to each person's feelings

I will try my best thanks for type this theard in xda

BolAalex said:
I will try my best thanks for type this theard in xda
Click to expand...
Click to collapse
Nice bro you is my best

Dev_Member said:
riceDroid for Pixel4/4XL [Flame/Coral]
What is riceDroid?
* RiceDroid is an opensource android operating system that aims to bring the necessary system modifications while being neat, stable and fast.
What is RiseUI?
* RiseUI is the name for our firmware skin/user interface.
Terminology
* The RICE in the project refers to rice(food) itself, but in a sense it is indeed the term RICING in linux.
Based on Android 13 | Obbattu
What's working?
Almost everything
What's working? aka Firmware issues
Tell Me
Download links: GoogleDriver
First Time Install / Clean Flash from Another ROM
1. Reboot to Fastboot
2. Flash boot.img
3. Go to Recovery Mode
4. Go to "Apply Update - Adb Sideload"
5. Flash the ROM
6.FORMAT DATA . (Requires full backup of internal storage) ignore any error
7. Reboot to System and #KeepRiceDroid
Update / Dirty Flash
1. Reboot to Fastboot
2. Flash boot.img
3. Go to Recovery Mode
4. Go to "Apply Update - Adb Sideload"
5. Flash the ROM
6. Reboot to System and #KeepRiceDroid
Android OS version: 13
Security patch level: 28/01/2023
Build author/Device Maintainer: BolAalex
Device source code: BolAalex
Firmware source code: https://github.com/ricedroidOSS
Firmware created by: The riceDroid Team
BIG THANK YOU
Bolaalex build this rom
TonyDubai1999 donate to maintain the server
Click to expand...
Click to collapse
File rom will soon uploading ggdriver

Dev_Member said:
riceDroid for Pixel4/4XL [Flame/Coral]
What is riceDroid?
* RiceDroid is an opensource android operating system that aims to bring the necessary system modifications while being neat, stable and fast.
What is RiseUI?
* RiseUI is the name for our firmware skin/user interface.
Terminology
* The RICE in the project refers to rice(food) itself, but in a sense it is indeed the term RICING in linux.
Based on Android 13 | Obbattu
What's working?
Almost everything
What's working? aka Firmware issues
Tell Me
Download links: GoogleDriver
First Time Install / Clean Flash from Another ROM
1. Reboot to Fastboot
2. Flash boot.img
3. Go to Recovery Mode
4. Go to "Apply Update - Adb Sideload"
5. Flash the ROM
6.FORMAT DATA . (Requires full backup of internal storage) ignore any error
7. Reboot to System and #KeepRiceDroid
Update / Dirty Flash
1. Reboot to Fastboot
2. Flash boot.img
3. Go to Recovery Mode
4. Go to "Apply Update - Adb Sideload"
5. Flash the ROM
6. Reboot to System and #KeepRiceDroid
Android OS version: 13
Security patch level: 28/01/2023
Build author/Device Maintainer: BolAalex
Device source code: BolAalex
Firmware source code: https://github.com/ricedroidOSS
Firmware created by: The riceDroid Team
BIG THANK YOU
Bolaalex build this rom
TonyDubai1999 donate to maintain the server
More: Our Telegram Channel
Click to expand...
Click to collapse
Initial impressions:
Slick and more robust than CrDroid
Adds some features that I'm digging
Loving the look and feel of the UI
Issues:
Getting a "Device Health Services Adapter keeps stopping" pop-up often, though this can be solved by rooting, removing the application, and installing the latest version from Apkmirror.
Incorrect padding on the status bar; essentially clips the time off the screen (and the carrier on the lock screen) ever so slightly, can easily be solved.
Fails safety-net

Dev_Member said:
riceDroid for Pixel4/4XL [Flame/Coral]
What is riceDroid?
* RiceDroid is an opensource android operating system that aims to bring the necessary system modifications while being neat, stable and fast.
What is RiseUI?
* RiseUI is the name for our firmware skin/user interface.
Terminology
* The RICE in the project refers to rice(food) itself, but in a sense it is indeed the term RICING in linux.
Based on Android 13 | Obbattu
What's working?
Almost everything
What's working? aka Firmware issues
Tell Me
Download links: GoogleDriver
First Time Install / Clean Flash from Another ROM
1. Reboot to Fastboot
2. Flash boot.img
3. Go to Recovery Mode
4. Go to "Apply Update - Adb Sideload"
5. Flash the ROM
6.FORMAT DATA . (Requires full backup of internal storage) ignore any error
7. Reboot to System and #KeepRiceDroid
Update / Dirty Flash
1. Reboot to Fastboot
2. Flash boot.img
3. Go to Recovery Mode
4. Go to "Apply Update - Adb Sideload"
5. Flash the ROM
6. Reboot to System and #KeepRiceDroid
Android OS version: 13
Security patch level: 28/01/2023
Build author/Device Maintainer: BolAalex
Device source code: BolAalex
Firmware source code: https://github.com/ricedroidOSS
Firmware created by: The riceDroid Team
BIG THANK YOU
Bolaalex build this rom
TonyDubai1999 donate to maintain the server
More: Our Telegram Channel
Click to expand...
Click to collapse
Check and down file

THANK U DEV, Hope we go deeper on This....Uniqueness on our P4s Active edge, back double tap Features are missing and RICE The BOOT animation too

LuckyTheCoder said:
What are the benefits of running this compared to say... Pixel Experience or CrDroid?
Click to expand...
Click to collapse
new unique ui...A lot of customization

musp7 said:
THANK U DEV, Hope we go deeper on This....Uniqueness on our P4s Active edge, back double tap Features are missing and RICE The BOOT animation too
Click to expand...
Click to collapse
Source not not stable yet

LuckyTheCoder said:
Initial impressions:
Slick and more robust than CrDroid
Adds some features that I'm digging
Loving the look and feel of the UI
Issues:
Getting a "Device Health Services Adapter keeps stopping" pop-up often, though this can be solved by rooting, removing the application, and installing the latest version from Apkmirror.
Incorrect padding on the status bar; essentially clips the time off the screen (and the carrier on the lock screen) ever so slightly, can easily be solved.
Fails safety-net
Click to expand...
Click to collapse
FIX "Device Health Services Adapter keeps stopping"
Please root and delete the old apk version on your device, then change and download the latest apk to work properly
DeviceHealthService_1.25.0.apk
drive.google.com

Wifi calling toggle fails.

toddmax said:
Wifi calling toggle fails.
Click to expand...
Click to collapse
i will update and fixx soon thanks feeback

This ROM is very smooth

Is this status bar based on los common problem？

such a great work !! great customization and smooth !! @Dev_Member Since there are no updates for 3months i guess this PRoject is Dead :S

dukat0s said:
such a great work !! great customization and smooth !! @Dev_Member Since there are no updates for 3months i guess this PRoject is Dead :S
Click to expand...
Click to collapse
Am Developer of this rom @Dev_Member is my friend who's posted it for me and yes project dead cause no server , unfortunately :⁠-⁠\

Dirty flashed form EvoX and everything just works fine!

Please add app Lock skip manual confirmation option,