Related
Hi guys
I recive my mi4c today. I have a few questions:
1. Miui stable release: 7.0.99.99 (LXKCNCI) How is this possible? I see here an other number http://en.miui.com/download-293.html
My software isnt original?
2. The phone is not rooted. is that right?
3. How can I pre installed apps remove? I install the stable rom from en.miui.com? What is the best way for me?
thanks.
Ümit said:
Hi guys
I recive my mi4c today. I have a few questions:
1. Miui stable release: 7.0.99.99 (LXKCNCI) How is this possible? I see here an other number http://en.miui.com/download-293.html
My software isnt original?
2. The phone is not rooted. is that right?
3. How can I pre installed apps remove? I install the stable rom from en.miui.com? What is the best way for me?
thanks.
Click to expand...
Click to collapse
1. Probably a fake Xiaomi rom installed from the seller
2. It shouldn't be
3. Pay attention to original rom from Xiaomi, as now the dev rom lock your boatloader, in future stable rom could lock it too.
My advice is to install a custom recovery ( TWRP ), then if you like the miui system you can flash sMiui or Xiaomi.eu rom, otherwise give a try to cyanogen mod.
You can find all info in various thread scattered over the Mi 4c section.
Thanks for the answer.
I searched to information how I can flash TWRP, but I cant find anywhere clean information.
Do you want give me link please?
1. ROM from Xiaomi, but seller modified it....
2. No Root
3. The Best way is stay away from xiaomi official ROM
Another advise... Download Official Xiaomi Fasboot ROM and fastboot tool ...and keep it...for just in case if u want to back stock rom / official rom and sell it......
Install custom recovery TWRP ( Team Superluminal "Cyanogen ROM" or Cofface "Miui ROM") , then flash unofficial MIUI Rom ( sMiui or xiaomi.eu ) or Rom from team Superluminal...enjoy ur great device
custom recovery
how to install just search...
---------- Post added at 11:30 PM ---------- Previous post was at 11:09 PM ----------
Its link what i am using to flash
- download "Download TWRP recovery"....extract it, delete or move 'recovery.img' inside folder.....
- download another recovery (link in my post before) and move .img file in folder u download before ( if name of file blablabla.img, rename to recovery.img )
- make sure ur phone enable usb debugging , go to setting - about phone - see build number and tap several times to enable developer mode...and go to extra setting u will see developer option there and enable usb debugging
- the rest u can check the link...good luck
Hi again!
I have many problems with usb drivers, flash recovery, flash stock miui rom...
Its was very easy with nexus 4. Just typing "flash all.bat" and DONE! 100% clean install.
Now what I did:
- Downloading official stock rom from en.miui.com
- Updated/Flashed via updater app
- Back to recovery, wipe all data.
Everyting going way, except for the apps come with stock miui.
Is this actually a 'clean install'?
Ümit said:
Hi again!
I have many problems with usb drivers, flash recovery, flash stock miui rom...
Its was very easy with nexus 4. Just typing "flash all.bat" and DONE! 100% clean install.
Now what I did:
- Downloading official stock rom from en.miui.com
- Updated/Flashed via updater app
- Back to recovery, wipe all data.
Everyting going way, except for the apps come with stock miui.
Is this actually a 'clean install'?
Click to expand...
Click to collapse
Hello, yes this can be called a clean install...
if you want to get rid of the chinese apps just flash twrp and a custom rom:
1) download TWRP from here https://mega.nz/#!kM02hYKa!YOgKkCtRu-7wQT8JK4naRMPRExwpwKF0_vAVa4nwIqo
2) reboot your phone in fastboot then from cmd "fastboot flash recovery recovery.img", power off and boot directly into recovery
3) download a custom miui from http://www.smiui.net/mi4c_libra.php or http://xiaomi.eu/community/forums/miui-weekly-rom-releases.103/
4) wipe all and flash the rom you choose
5) enjoy!
But if I flash twrp recovery, I can install official updates from miui?
Ümit said:
But if I flash twrp recovery, I can install official updates from miui?
Click to expand...
Click to collapse
There is no need of official update, future update from Xiaomi will lock your boatloader... Xiaomi.eu take the official update every week and release their version rapidly, after optimizing and removing Chinese apps...
ice-it said:
Hello, yes this can be called a clean install...
if you want to get rid of the chinese apps just flash twrp and a custom rom:
1) download TWRP from here https://mega.nz/#!kM02hYKa!YOgKkCtRu-7wQT8JK4naRMPRExwpwKF0_vAVa4nwIqo
2) reboot your phone in fastboot then from cmd "fastboot flash recovery recovery.img", power off and boot directly into recovery
3) download a custom miui from http://www.smiui.net/mi4c_libra.php or http://xiaomi.eu/community/forums/miui-weekly-rom-releases.103/
4) wipe all and flash the rom you choose
5) enjoy!
Click to expand...
Click to collapse
Hi, I've received my device but went with 7070 rom stock stable and updated to the last one stable, how do I know if the bootloader is unlock or not?? Thanks
Enviado desde mi RAZR HD mediante Tapatalk
10.3.2.0
https://sourceforge.net/projects/xi..._MIMix2S_V10.3.2.0.PDGCNXM_v10-9.zip/download
https://androidfilehost.com/?fid=6006931924117882402
10.3.1.0
https://sourceforge.net/projects/xi..._MIMix2S_V10.3.1.0.PDGCNXM_v10-9.zip/download
https://androidfilehost.com/?fid=1395089523397934131
10.2.2.0
https://sourceforge.net/projects/xi..._MIMix2S_V10.2.2.0.PDGCNXM_v10-9.zip/download
https://androidfilehost.com/?fid=1395089523397908184
10.2.1.0
https://sourceforge.net/projects/xi..._MIMix2S_V10.2.1.0.PDGCNXM_v10-9.zip/download
https://androidfilehost.com/?fid=11410963190603887317
10.0.7.0
https://sourceforge.net/projects/xi..._MIMix2S_V10.0.7.0.PDGCNFH_v10-9.zip/download
https://androidfilehost.com/?fid=11410963190603845043
New links will be posted here.
10.0.4.0 bootloops for me
Coming from Pixel 3 Experience GSI ROM by EnesSastim. I can fastboot flash the official MIUI 10 Global which works but every time I flash this ROM via TWRP I just get bootloop.
Full wipe doesn't seem to help so I guess I'm sticking on the official Global ROM for now. Any ideas?
10.2.1.0 added in OP.
mike freegan said:
10.0.4.0 bootloops for me
Coming from Pixel 3 Experience GSI ROM by EnesSastim. I can fastboot flash the official MIUI 10 Global which works but every time I flash this ROM via TWRP I just get bootloop.
Full wipe doesn't seem to help so I guess I'm sticking on the official Global ROM for now. Any ideas?
Click to expand...
Click to collapse
Not sure if you ever figured it out but the instructions on EU's site are terrible and not very descriptive.
When they mean when they say "Wipe /Data" is to hit Wipe > Format Data > Type Yes (and swipe to confirm I believe) You will then have to copy over the zip to your phone and flash (That's why the instructions are written that way)
Keep in mind, that this will wipe your internal storage so make a back up. It also takes a long time to boot, longer than clean miui install.
is it possible to flash from one MIUI 10 rom to another? mine is on stock chinese 10 rom now, and can't see any files on the root folder of the phone under recovery. may need to use the rom's flash function.
Hello friends, I hope and can help me, it turns out I have the ROM installed but not let me have permissive the seLinux with the kernel stock, just let me if I put a modified kernel, the problem is that for me none of all the modified kernel gives me the autonomy that gives me and L kernel stock, I want to have the permissive ROM of seLinux with the kernel stock, someone knows how? Thank You for your help
10.2.2.0 added in OP.
Might sound like a silly question, but when the phone was first launched and people applied xiaomi.eu roms, some reported that installing magisk would brick their phones for whatever reason. Is this still the case? I just want to pass my safetynet
10.3.1.0 added in OP.
10.3.1.0 reuploaded: https://xiaomi.eu/community/threads/miui-10-0-10-1-10-2-10-3-stable-release.47170/post-480558
10.3.2.0 added in OP.
10.3.2.0 reuploaded.
Hello, anyone here can help me roll back to stock miui Rom, i tried flashing it through twrp, it gives error 0007 never works, currently i am on custom Rom since there is not much developmemt here, i installed one custom Rom battery backup and performance is not good also i could only try some of them i could not try all of them same reason could not install, now i am stuck on a custom Rom....please any help suggestion to roll back to Stock Miui Rom, i have indian unit Poco x2.
Thank you
KartikManish said:
Hello, anyone here can help me roll back to stock miui Rom, i tried flashing it through twrp, it gives error 0007 never works, currently i am on custom Rom since there is not much developmemt here, i installed one custom Rom battery backup and performance is not good also i could only try some of them i could not try all of them same reason could not install, now i am stuck on a custom Rom....please any help suggestion to roll back to Stock Miui Rom, i have indian unit Poco x2.
Thank you
Click to expand...
Click to collapse
Download the pocox2 fasboot images and flash it through miflash tool!
download fastboot images from https://mifirm.net/model/phoenix.ttt for indian variant .
put your phone in fastbboot mode
flash through mi flash or through scripts in the extracted folder in windows or linux.
Just tried it error
i.snehal.kiran said:
download fastboot images from https://mifirm.net/model/phoenix.ttt for indian variant .
put your phone in fastbboot mode
flash through mi flash or through scripts in the extracted folder in windows or linux.
Click to expand...
Click to collapse
I just tried it showing error
Status showing " antirollback check error"
KartikManish said:
I just tried it showing error
Status showing " antirollback check error"
Click to expand...
Click to collapse
so must be on higher version of miui firmware.
you should get that version of miui stock rom images and flash them
i.snehal.kiran said:
so must be on higher version of miui firmware.
you should get that version of miui stock rom images and flash them
Click to expand...
Click to collapse
I am on a custom Rom, not on any miui higher version have to roll back from custom to Stock miui...
KartikManish said:
I am on a custom Rom, not on any miui higher version have to roll back from custom to Stock miui...
Click to expand...
Click to collapse
no no you dont understand.
what was your firmware when you are on custom rom???
you have to flash that exact firmware containing fastboot images .
May be you are trying to install stock firmware which is lower version than installed firmware.
Hey dude, I get your problem. I'm facing the same problem myself! Unless you get the "Fastboot images" of miui 12, which will take another 1 month to come, you have to be on custom rom only. You cannot go back to stock rom.
That's why I flashed Bootleggers today. EvoX has bugs, but bootleggers feels smooth. If you really want a dependable rom, I'd suggest, EU MIUI, which you can flash directly over TWRP or else Bootleggers.
Until then, let's wait for the month end to get the fastboot images
i.snehal.kiran said:
no no you dont understand.
what was your firmware when you are on custom rom???
you have to flash that exact firmware containing fastboot images .
May be you are trying to install stock firmware which is lower version than installed firmware.
Click to expand...
Click to collapse
Okay i tried it same error again.... Not sure whats wrong here... Anyways thank you for your help.
superminnu said:
Hey dude, I get your problem. I'm facing the same problem myself! Unless you get the "Fastboot images" of miui 12, which will take another 1 month to come, you have to be on custom rom only. You cannot go back to stock rom.
That's why I flashed Bootleggers today. EvoX has bugs, but bootleggers feels smooth. If you really want a dependable rom, I'd suggest, EU MIUI, which you can flash directly over TWRP or else Bootleggers.
Until then, let's wait for the month end to get the fastboot images
Click to expand...
Click to collapse
Yeah i am on EvoX will try Bootleggers or EU MiUi and wait for miui 12 letme know when you do it, did it work, thank you...
KartikManish said:
Yeah i am on EvoX will try Bootleggers or EU MiUi and wait for miui 12 letme know when you do it, did it work, thank you...
Click to expand...
Click to collapse
Yes, let's wait for a month, until then happy playing with custom roms
KartikManish said:
Hello, anyone here can help me roll back to stock miui Rom, i tried flashing it through twrp, it gives error 0007 never works, currently i am on custom Rom since there is not much developmemt here, i installed one custom Rom battery backup and performance is not good also i could only try some of them i could not try all of them same reason could not install, now i am stuck on a custom Rom....please any help suggestion to roll back to Stock Miui Rom, i have indian unit Poco x2.
Thank you
Click to expand...
Click to collapse
Unzip stock rom and edit updater-script. Replace this word phoenixin to phoenix , then repack all files and flash.
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!
nalin_s3 said:
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!
Click to expand...
Click to collapse
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!
Perseo99 said:
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!
Click to expand...
Click to collapse
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ??
nalin_s3 said:
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ?
Click to expand...
Click to collapse
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.
Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Can you check your pm??
There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool
jepoyxxv said:
There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool
Click to expand...
Click to collapse
I already went to 11 and flash to 3.11
But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me
jepoyxxv said:
But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me
Click to expand...
Click to collapse
If you are in 11 beta and want to downgrade..just simple flash global version and again flash 3.11 done
What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.
jepoyxxv said:
What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.
Click to expand...
Click to collapse
I just flash global from otg and tham again 3.11
walkwitmeinhel said:
I just flash global from otg and tham again 3.11
Click to expand...
Click to collapse
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.
[email protected] said:
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.
Click to expand...
Click to collapse
http://ui.nubia.cn/rom/detail/64
Oh! Didn't expect that. I just post this for Red Magic 3 device users. I don't know how RM3S actually works. Have you tried the unbrick tool from chinese version? Or just flashing the global rom from recovery is enough?
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
Let's see. Here is a link for Red Magic 3S unbrick tool. Download the non-eu ones.
If you have a Red Magic 3 with Red Magic 3s software, I will provide you the link to the other unbrick tool.
Also, you can try flashing the global rom from the stock recovery included in the package of the A11 rom that you have download.
Thanks for replying my bro.. my device is rm3s i already use rm3 and rm3s unbrick tool.. downloading fire hose programmer and image was successfully but.. my phone is still corrupted... And one thingg i dont have twrp install in my rm3s thats why its hard for me to fix it.. can you please guide or teach me how to flash stock recovery using global rom i know how to use cmd and adb
jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
So then, It's not a problem of the unbrick tool, that is actually working properly. The thing is that you didn't know how to do a correct process to migrate from cm rom to global...
The first thing you should do is reboot the phone into fastboot mode (power+vol. Down). Then, connect the phone to the PC and type the next commands in the cmd:
Code:
fastboot devices
in order to see if your device is being recognized
Code:
fastboot oem nubia_unlock NUBIA_NX629J
to unlock the bootloader
Code:
fastboot flashing unlock
in order to make your phone able to boot with a modified software. In the moment you will enter this command, you will see a screen advising you about your data (it'll be erased once you accept to unlock flashing).
After that, you can reboot your phone, that will show you an screen advising you that the bootloader is open. Accept and continue without problems.
Tell me if you have been able to make your phone boot.
Perseo99 said:
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.
Click to expand...
Click to collapse
Required in CN A10 + twrp A10, or maybe from CN A9 + twrp A9 to be able to flash
hi.first of all I aplogize for my poor English.my poco x3 nfc was updated to miui 12.5.3 some weeks ago then i decide to roll it back to 12.0.4 Q which i did some mistakes and my phone got hard bricked.by mi authoriz account i flashed this version but from this day update to android 11 wasnt show on my phone so i decide to flash fastboot 12.5.4 .after that i decide to roll back again in 12.0.4Q (becuse of some nervy bugs) but i face to a problem.miflash flash complactly but my phone stuck on poco logo and reboot continuiosly.i tried to format data using twrp and stock recovery but it didnt solve anything.android 11 work but android 10 no
You should flash stock MIUI ROM with Mi tools and start from scratch
i flash stock miui rom use miflash.
ArG01 said:
i flash stock miui rom use miflash.
Click to expand...
Click to collapse
Using the fastboot ROM?
yes bro.im so confuse.and also when i install twrp or orange fox rec i cant mount system and vendor