Hello guys today i will show you how to download Aosp rom (GSI) with android pie on Lenovo K9 (L30843)
Download TWRP first: https://mega.nz/#!tFcm1IYb!nN6H210DoyYqjL0WEnI-I9skClDPEO0gl82H5My-gq4
if you have not unlocked the bootloader: https://www.howtoapps.info/how-to-unlock-bootloader-lenovo-k9/
Aosp rom link: https://mega.nz/#!cAdFwSoI!RqVg18SU-adnmltKV1JuL_1NB_V9KCemYX8fZwUyzkA
First step: Go to the TWRP.If you have internal storage (0mb),Go to wipe/advanced wipe/mark data/repair or change file system/change flie system/EXT4 and you're done
I recommend you save your rom to sd card not have thousands of quarrels
Second step: Go to micro sd card/install image/your recorded aosp rom/mark system image/slipe to confirm flash
Third step: gapps link: https://mega.nz/#!9dFkWY5I!JKX80Udn2ZmTgRuGiwgcdRLQXEBssowK7xUOvL2wW4E
Install zip/mark open_gapps-arm64-9.0....../swipe to confirm flash/reboot system now
the rom leaves without a logo,shows its original logo of Lenovo,And after a while the inscriptions orange state are removed and the android logo appeared.
Mention below in the comments if there are bugs!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i can see only TWRP even after installing custom rom
irssharma said:
i can see only TWRP even after installing custom rom
Click to expand...
Click to collapse
you have to recover stock firmware and try again.
irssharma said:
i can see only TWRP even after installing custom rom
Click to expand...
Click to collapse
It also happens to me quite often.
Related
Hello,
Today I've been trying to root my HTC One S (S3) and install CM11 (cm-11-20140210-SNAPSHOT-M3-ville)
1. I made successfull S-OFF
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Installed wrong recovery (r2-modaco-recovery-clockwork-touch-ville.img)
3. Then installed correct (working) recovery for s3
4. Flashed my boot - fastboot flash boot boot.img
5. Made backup
6. Factory reset (everything)
7. Tried to install cm *.zip but here it is (tried also another CM's):
What is more phone freezes during start, display non-stop the same:
Help me please, what can I do ?
marcinostry said:
Hello,
, what can I do ?
Click to expand...
Click to collapse
did you downloaded the rom fir your device ?
cause, as i look at your pictures, that rom isn't for your device, see picture number 2,
or there's something wrong at updater script, contact your rom developer about the updater script
edit : you can aslo try to replace your recovery with the others, maybe it's the problem too
http://download.cyanogenmod.org/?device=ville
Here is source of my roms. However there is no info if they are for s3 or s4 ..
Problem SOLVED
ROMS located on the cyanogenmod site are for ville (but not ville c2).
I used "Stable: cm-11-20140110-UNOFFICIAL" from http://forum.xda-developers.com/showthread.php?t=2527962 because it's especially for C2
Before flash I had to flash the kernel file from THIS NEW version
Then made factory reset in TWRP 2 Recovery (versions for c2 - http://techerrata.com/browse/twrp2/villec)
Finally, installed the rom from xda and everything works fine !
cyanogenmod 12.1 for lenovo s850
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BUGS:
GPS
Click to expand...
Click to collapse
INSTALLATION:
1.go to twrp
2.mount data,cache,system.
3.clear/format cache,format data , format system
4.install zip file from sd card(please put downloaded zip file root directory )
5.reboot to system( it take some minutes for 1st boot be patient)
Click to expand...
Click to collapse
DOWNLOAD:
https://docs.google.com/uc?id=0B8M6GkxQoXkSQ1ZfcGlmZnp3WWM&export=download
Click to expand...
Click to collapse
gapps:http://opengapps.org/
English?
Is it possible to install this ROM and have English Language?
how to get english after installing cm12.1 ??
Is it really a full ROM or just an update? It has only about 300MB in comparison with almost 1GB+ of stock ROM
I am asking, because I have tried that on TWRP-formatted S850 and ended up with infinitely glowing Cyanogenmod mascot :crying:
Hello... this ROM for S850_cn or S850_row?!
Thank you very much!
Error while flashing: MD5 file not found
I have lenovo s850, I rooted my device and even checked for root access through root checker.I flashed twrp 2.8.0 I downloaded the custom ROM cm12.1 from the link given in this thread but I'm not able to flash it I'm getting error as dm5 file not found. Can anyone help me.. please
CWM and TWRP recovery for CMX RapaxLe 070-0508 and Onda V702F
Hello,
In this post i will present CWM and TWRP for these tablet`s.
Ok,I was bored,then was searching for something to do and then I founded this(CMX) tablet.
I had free time and compiled TWRP and CWM
On internet you wont see much obout these tablets.I don`t know why.
-
INFO
BUGS
TWRP is orange colored
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I recently started AOKP and CM porting for a13 tablets(MID)
If you want TWRP on your tablet send me a pm!
Everything is written manually,and compiled manually. :good: :fingers-crossed:
Driver: gslX680 is used in TWRP,I extracted it from my tablet(CMX) Android 4.2.2 official update found on their ftp server
ONDA V702F and CMX RapaxLe 070-0508 INFO
They look same and they have same hardware so this will work too!
-
How to install?
Just download files attached and extract them,then run ´Flash_recovery to tablet.bat´
ZIP`s are for windows so they`re not CWM flashable.
Thanks goes to jhun12 who said that cwm work fine on ``itechie tab``
And another info,I`m only 14 years old,so XDA pleasse dont ban me.I really much love XDA and Android development.
Thanks!
CM 14 [7.0.1] for Lenovo A536 by yurapanyuk
"I am not responsible for your bricks and please backup first"
Instructions:
Important :please follow this instruction
warning: don't proceed without reading above instruction
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Language:multilanguage (including english)
Details:
Version Android: 7.0
kernel version: 3.10.103
status: ALPHA
Gapps included
no root included
Click to expand...
Click to collapse
Stability details
Well I can say the firmware is still in Alpha (not for daily use) ,required improvements, Do not forget to make a backup.
notes
1) during the first boot ,do not sign in your Google account, complete the configuration without it.
2) Go to "Settings> Applications> Google play services", set all the permissions.
3) Do the same thing-with the Play market application.
4) Open the market and now sign in your account, everything should work.
DOWNLOAD
Rom: CM 14
Thanks to
@darklord4822 - kernel source
@Zoggn - Building the kernel
@ Qwanor -Assembly flashing
Click to expand...
Click to collapse
Correction...trying to install the ROM again after formatting SD card. Apparently SD card was corrupt. Cool ROM would like to see it go to final. Camera doesn't work at all from first boot.
No sim card detected problem is here.
I can't download the rom file doesn't exist....
Hi I successfully rooted my device (Magisk) following the steps from the below link :-
after rooting my device I cross verified via root checker.......then reinstalled Magisk application and everything worked fine.
after that stupid me didnt know what i was doing and was playing with the Magisk application and clicked on the option install on the first option.
then the device asked to reboot and i rebooted.......after that my device is stuck in an endless reboot.
when trying to access TWRP am only getting android stock recovery.
conclusions :-
DEVICE STUCK IN ENDLESS BOOTLOOP !
UNABLE TO ACESS TWRP
NEED HELP IN :-
HOW TO INSTALL NEW FIRMWARE !
HOW TO REMOVE CURRENT OS FIRMWARE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Re-flash phone's Stock ROM to get rid off of all modificatins you applied so far.
jwoegerbauer said:
Re-flash phone's Stock ROM to get rid off of all modificatins you applied so far.
Click to expand...
Click to collapse
jwoegerbauer said:
Re-flash phone's Stock ROM to get rid off of all modificatins you applied so far.
Click to expand...
Click to collapse
HELLO THANK YOU FOR THE REVERT BUT I GET A BIG FAIL POP UP WHEN TRYING FLASH STOCK ROM VIA ODIN attached screenshots plsssss help me ! Am I doing anything wrong while flashing let me know .