Related
Bold statement, I know. I have owned almost every Note iteration and the Nokia 1520. Once I rooted the phone and removed the Chinese Bloatware, I am running close to stock Android on my P8 Max and since I have completed the above tasks, I have a smoothest and most powerful experiences ever. My Android Wear application is working so much better now than ever before. Thanks to all those who helped me get to this point.
Nice to hear that for you. I really want to buy the P8 Max too because it has the screensize I am looking for.
But before I buy one, I have to know more about it. What is the build version you have and how did you rooted it to stock Android?
And may I ask you to try one of the themes to see if they work on the P8 Max? I have so many concerns it ma not work because of the EMUI 3.1
It's this:
play.google.com/store/apps/developer?id=DualBoot+Games
michaeldanielbourke said:
Bold statement, I know. I have owned almost every Note iteration and the Nokia 1520. Once I rooted the phone and removed the Chinese Bloatware, I am running close to stock Android on my P8 Max and since I have completed the above tasks, I have a smoothest and most powerful experiences ever. My Android Wear application is working so much better now than ever before. Thanks to all those who helped me get to this point.
Click to expand...
Click to collapse
Can you share your root method and what apos ddid you remove?
Kind regards
David
fergie_uk said:
Can you share your root method and what apos ddid you remove?
Kind regards
David
Click to expand...
Click to collapse
Good morning David,
I will add a new thread called Root and Remove. You will notice that I have posted a few threads in an effort to perform this exercise. But I have saved all the correct files into particular folders on my computer and will upload with a simple easy to follow guide. I need to pay it forward. I can tell you I removed all the chinese software, everything gone. All i have remaining in my Huawei folder is:
1. Settings
2. Videos
3. Themes (kept this and have changed my system font to Roboto)
4. Phone Manager
5. Files
6. Director Mode
7. Messaging
8. Clock x 2
9. Contacts
I removed most of the bloatware that was overlayed over EMUI. It is running as close to stock as I can get it. I also installed NOVA launcher and can swap between Nova, Google Now and EMUI 3.1. My Android Wear strength has also improved, making dropouts and reconnects rare as hens teeth.
Stay Tuned.
Michael
"I need to pay it forward".......what do you mean with this?
Paying it forward...
moviehunter2009 said:
"I need to pay it forward".......what do you mean with this?
Click to expand...
Click to collapse
Because so many people assisted me in rooting my phone, I need to "pay it forward" and share their collective methods. Which I will do, most likely tomorrow night or over the weekend. Michael
michaeldanielbourke said:
Because so many people assisted me in rooting my phone, I need to "pay it forward" and share their collective methods. Which I will do, most likely tomorrow night or over the weekend. Michael[/QUOTE
thats nice now i get it...well tomorrow i get my phone too....waiting for 20 days to come from china..ready to follow your instructions..
Click to expand...
Click to collapse
To be honest I am interested in seeing your method to
Managed to root my phone.. even when I have updated the EMUI to B018, but there was an issue.. I tell you below
Step I follow from Chinese Forum below...
Preparation step :
1. download the tools from
https://www.mediafire.com/?9drsdo2f6hn4j34
2. Extract the content to your local. Note there are two folders :
- Folder 1 is for the tool that contains the TWRP recovery.img and the adb/fastboot tool,
- Folder 2 is for the original recovery
3. Copy the SuperSU zip to your phone (either in internal or external memory of your phone)
Installation step :
Step 0, unlock your bootloader (search around on how to do it)
1. Since I am using mac, somehow I don't need to install any driver, but if you using windows, install all the driver yourself
2. Enable the developer mode in your phone, and after that enable the usb debugging
3. Turn off your phone, and boot to fastboot (in off mode, connect the phone with your PC then press Volume Up and Power Button together)
4. Since now your phone has been connected to the PC, go to that Tool folder in respective of your OS, then overwrite the recovery with TWRP with fastboot command (install custom recovery) *note : for mac just add "./" in every command
- check the whether its connected : fastboot devices
- install TWRP : fastboot flash recovery recovery.img
5. Restart your phone and boot to recovery
- restart : fastboot reboot
- after reboot, turn off your phone
- reboot to recovery : turn on your phone by holding Volume Down with Power button
- Now you are at TWRP
6. Install SuperSU (root)
- Install SuperSU zip that has already been copied to your phone using TWRP (use the Install mode)
7. Reboot the phone
- Use reboot function in twrp
8. Profit
Theoritically the above things works but I have some issues following the above :
- After step 4, after recovery being flashed with TWRP seems like my phone Boot Partition is being overwritten too
- So when I rebooted the phone, it boot to TWRP instead
- So I tried to re-flashed the recovery with the original EMUI rom recovery (go to the folder "2.P8Max_Official_Recovery(For_restoration)" to find the original recovery.img). Also note that in the this folder, the adb and fastboot is only for mac. The one for windows use it in the tools
- This is done by going to fastboot again, then do command : fastboot flash recovery recovery.img
- This time using the original recovery
- Now when I rebooted the phone, it goes to EMUI recovery, then I just clicked restart to system or something
- After this, everything fixed, and I have SuperSU install and phone rooted
You can follow the above, but do it at your own risk, I am not responsible if your phone brick hehehe..
Original chinese forum is here : http://cn.club.vmall.com/thread-4919441-1-1.html
Click to expand...
Click to collapse
1 min search in forum
Thanks for your step by step guide.
My issue is that I can't even get the fastboot unlock code, if I pm someone my details will someone get the unlock code from huawei.
fergie_uk said:
Thanks for your step by step guide.
My issue is that I can't even get the fastboot unlock code, if I pm someone my details will someone get the unlock code from huawei.
Click to expand...
Click to collapse
gave me your details
Hirs_E_Fruit said:
Managed to root my phone.. even when I have updated the EMUI to B018, but there was an issue.. I tell you below
Step I follow from Chinese Forum below...
Preparation step :
1. download the tools from
https://www.mediafire.com/?9drsdo2f6hn4j34
2. Extract the content to your local. Note there are two folders :
- Folder 1 is for the tool that contains the TWRP recovery.img and the adb/fastboot tool,
- Folder 2 is for the original recovery
3. Copy the SuperSU zip to your phone (either in internal or external memory of your phone)
Installation step :
Step 0, unlock your bootloader (search around on how to do it)
1. Since I am using mac, somehow I don't need to install any driver, but if you using windows, install all the driver yourself
2. Enable the developer mode in your phone, and after that enable the usb debugging
3. Turn off your phone, and boot to fastboot (in off mode, connect the phone with your PC then press Volume Up and Power Button together)
4. Since now your phone has been connected to the PC, go to that Tool folder in respective of your OS, then overwrite the recovery with TWRP with fastboot command (install custom recovery) *note : for mac just add "./" in every command
- check the whether its connected : fastboot devices
- install TWRP : fastboot flash recovery recovery.img
5. Restart your phone and boot to recovery
- restart : fastboot reboot
- after reboot, turn off your phone
- reboot to recovery : turn on your phone by holding Volume Down with Power button
- Now you are at TWRP
6. Install SuperSU (root)
- Install SuperSU zip that has already been copied to your phone using TWRP (use the Install mode)
7. Reboot the phone
- Use reboot function in twrp
8. Profit
Theoritically the above things works but I have some issues following the above :
- After step 4, after recovery being flashed with TWRP seems like my phone Boot Partition is being overwritten too
- So when I rebooted the phone, it boot to TWRP instead
- So I tried to re-flashed the recovery with the original EMUI rom recovery (go to the folder "2.P8Max_Official_Recovery(For_restoration)" to find the original recovery.img). Also note that in the this folder, the adb and fastboot is only for mac. The one for windows use it in the tools
- This is done by going to fastboot again, then do command : fastboot flash recovery recovery.img
- This time using the original recovery
- Now when I rebooted the phone, it goes to EMUI recovery, then I just clicked restart to system or something
- After this, everything fixed, and I have SuperSU install and phone rooted
You can follow the above, but do it at your own risk, I am not responsible if your phone brick hehehe..
Original chinese forum is here : http://cn.club.vmall.com/thread-4919441-1-1.html
Click to expand...
Click to collapse
Bro... all this is originally my post here hahaha... http://forum.xda-developers.com/showthread.php?p=62145915
Should give me thanks for that
dodzs said:
Bro... all this is originally my post here hahaha... http://forum.xda-developers.com/showthread.php?p=62145915
Should give me thanks for that
Click to expand...
Click to collapse
well we are expecting the guide from michaeldanielbourke in this forum but the other guy posted this (your guide).
well this is the only working guide and if ppl to dumb to search in this forum i post it for them ...
michaeldanielbourke said:
Good morning David,
I will add a new thread called Root and Remove. You will notice that I have posted a few threads in an effort to perform this exercise. But I have saved all the correct files into particular folders on my computer and will upload with a simple easy to follow guide. I need to pay it forward. I can tell you I removed all the chinese software, everything gone. All i have remaining in my Huawei folder is:
1. Settings
2. Videos
3. Themes (kept this and have changed my system font to Roboto)
4. Phone Manager
5. Files
6. Director Mode
7. Messaging
8. Clock x 2
9. Contacts
I removed most of the bloatware that was overlayed over EMUI. It is running as close to stock as I can get it. I also installed NOVA launcher and can swap between Nova, Google Now and EMUI 3.1. My Android Wear strength has also improved, making dropouts and reconnects rare as hens teeth.
Stay Tuned.
Michael
Click to expand...
Click to collapse
Hi Michael, thanks for the post, and this new post will be a great idea.
Do you know the way to eliminate the Chinese phone search in the original dialer?
Hi there
I try many but cant get unlock bootloader by Huawei website, pls help me to get unlock code and thank in advance.
Thank again
quynh2v said:
Hi there
I try many but cant get unlock bootloader by Huawei website, pls help me to get unlock code and thank in advance.
My p8max is 703l
Thank again
Click to expand...
Click to collapse
You should never post that information in a public forum. I would edit your post and remove everything about your phone's information like the IMEI and serial information. Send a PM (private message) to @rowihel2012. He has been helping everyone with the unlock code if people have difficulty.
opasha said:
You should never post that information in a public forum. I would edit your post and remove everything about your phone's information like the IMEI and serial information. Send a PM (private message) to @rowihel2012. He has been helping everyone with the unlock code if people have difficulty.
Click to expand...
Click to collapse
i sent you the unlockcode in private did it come?
rowihel2012 said:
i sent you the unlockcode in private did it come?
Click to expand...
Click to collapse
Not yet, but thank you for sending it . The website should work fine for me once I get it. I'll keep you posted and use the code you sent me if I run into any difficulty thanks.
opasha said:
Not yet, but thank you for sending it . The website should work fine for me once I get it. I'll keep you posted and use the code you sent me if I run into any difficulty thanks.
Click to expand...
Click to collapse
weard i already send it for you
---------- Post added at 06:22 PM ---------- Previous post was at 06:10 PM ----------
quynh2v said:
hi there
i try many but cant get unlock bootloader by huawei website, pls help me to get unlock code and thank in advance.
Thank again
Click to expand...
Click to collapse
9278221147516616
---------- Post added at 06:23 PM ---------- Previous post was at 06:22 PM ----------
opasha said:
Not yet, but thank you for sending it . The website should work fine for me once I get it. I'll keep you posted and use the code you sent me if I run into any difficulty thanks.
Click to expand...
Click to collapse
dont know what the problem is i keep sending you but it wont come
i will get the code for you Here just send me youi details
STEP BY STEP GUIDE FOR LG V20 H918 UNLOCKING BOOTLOADER, DOWNGRADING, ROOTING AND INSTALLING CUSTOM ROMS (NOOB FRIENDLY)
DISCLAIMER: I'M NOT THE DEVELOPER OF ANY OF THE BELOW SOFTWARE'S AND YOU PROCEED WITH YOUR OWN RISK AS THIS INVOLVES BRICKING OR DAMAGING YOUR MOBILE IF THE PROCEDURE IS NOT FOLLOWED CORRECTLY. I'M JUST SHARING THE WHOLE PROCESS WHICH I HAVE FOLLOWED TO ROOT AND INSTALL TWRP IN MY LGV20 H918 UNLOCKED T MOBILE.
AND I HAVE TESTED THIS IN MY OWN DEVICE AND WAS ABLE TO ROOT AND ACHIEVE TWRP.
THIS IS ONLY FOR LGV20 H918 VERSION
ENSURE INTERNET IS UP AND RUNNING IN YOUR PC
EDIT: THE WHOLE PROCESS HAS NOW BEEN AUTOMATED IN TWO SIMPLE STEPS TO PREVENT ANY POTENTIAL DAMAGE TO YOUR DEVICE. THANKS TO THE LAFSPLOIT CREATOR BRIAN @runningnak3d.
JUST FOLLOW THE PROCEDURE BELOW AND YOU SHOULD HAVE YOUR DEVICE ROOTED IN NO TIME
1. BACKUP ALL YOUR IMPORTANT DATA BEFORE PROCEEDING.
2.MAKE SURE YOU HAVE CHARGED YOUR PHONE TO AT LEAST 90 PERCENT
CHECK YOUR PHONE SOFTWARE VERSION IN SETTINGS---ABOUT PHONE----SOFTWARE INFO
IF IT IS ANYTHING BETWEEN H91810P TO H91810U MEANS IT IS ARB1 (ANTI ROLL BACK 1) AND YOU NEED TO USE LAFSPLOIT METHOD TO ROOT AND INSTALL TWRP,
IF YOUR VERSION IS H91810O OR BELOW (ARB0), YOU CAN EITHER USE DIRTYCOW OR LAFSPLOIT METHOD FOR THE SAME.
IF YOU ARE ON ARB1, PLEASE FOLLOW THE METHOD BELOW,
PART 1: DOWNGRADING
IF YOUR VERSION IS H91810 (Q, R, S, T, U) YOU NEED TO DOWNGRADE TO A LOWER VERSION ( H91810P) TO EXECUTE LAFSPLOIT.
IF YOU ARE ALREADY ON H91810P, YOU STILL NEED TO RE FLASH THE H91810P KDZ AGAIN FOR THE LAFSPLOIT SCRIPT TO WORK CORRECTLY.
DOWNLOAD H91810P KDZ FILE FROM BELOW
https://androidfilehost.com/?w=files&flid=282709
DOWNLOAD AND INSTALL ALL THE FILES BELOW IN YOUR PC
UPPERCUT AND LGUP----
http://downloads.codefi.re/autoprime/LG/Flash_Tools/LGUP/
LG DRIVERS---
http://tool.cdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425
CONNECT YOUR MOBILE TO YOUR PC IN DOWNLOAD MODE (SWITCH OFF YOUR MOBILE AND CONNECT THE USB FROM PC WHILE HOLDING THE VOLUME UP BUTTON SIMULTANEOUSLY)
RUN UPPERCUT.EXE WHICH WOULD OPEN LG'S UPDATER TOOL AUTOMATICALLY.
INSIDE THE LG UPDATER TOOL, CLICK ON BIN AND SELECT THE H91810P KDZ FILE DOWNLOADED EARLIER.
NOW SELECT UPGRADE AND FLASH
ENSURE THE USB CABLE IS CONNECTED THROUGH THE FLASHING PROCESS AND WAIT FOR YOUR PHONE TO REBOOT AND THEN REMOVE THE USB CABLE.
CHECK THE SOFTWARE VERSION AND ENSURE IT IS H91810P
PART 2: UNLOCKING BOOTLOADER
HEAD TO SETTINGS---ABOUT PHONE----SOFTWARE INFO (ENSURE IT IS H91810P)
ENABLE DEVELOPER OPTION IN YOUR PHONE BY CLICKING ON THE BUILD NUMBER MULTIPLE TIMES
NOW HEAD TO SETTINGS---DEVELOPER OPTIONS
TURN ON OEM UNLOCKING, ENABLE USB DEBUGGING AND DISABLE 'VERIFY APPS OVER USB'
NOW CONNECT YOUR PHONE TO PC AND OPEN ADB COMMAND CENTER PROMPT IN YOUR PC
adb devices---->CHECK IF YOUR MOBILE IS CORRECTLY RECOGNIZED IN ADB
adb reboot bootloader--->THIS REBOOTS YOUR DEVICE IN FASTBOOT MODE
fastboot devices---->CHECK IF YOUR MOBILE IS CORRECTLY RECOGNIZED IN FASTBOOT
fastboot oem unlock---->THIS COMMAND WOULD UNLOCK YOUR BOOTLOADER AND RESET's YOUR DEVICE.
fastboot oem device-info OR fastboot getvar unlocked ----->THIS WOULD CONFIRM IF YOUR BOOTLOADER HAS BEEN UNLOCKED OR NOT.
fastboot reboot-----> THIS WOULD REBOOT YOUR DEVICE
IF THE BOOTLOADER HAS BEEN SUCCESSFULLY UNLOCKED, THE DEVICE WILL SHOW AN UNLOCKED BOOTLOADER WARNING MESSAGE WHILE BOOTING (THIS CAN BE IGNORED OF COURSE)
PART 3: CREATING A BOOTABLE LINUX USB USING FWUL
DOWNLOAD FWUL_v2.7_x86_64_15GB.zip FROM THE LINK BELOW AND EXTRACT THE IMAGE FILE SOMEWHERE IN YOUR PC.
https://androidfilehost.com/?w=files&flid=214529
DOWNLOAD RUFUS FROM BELOW AND INSTALL
https://rufus.akeo.ie/
INSERT A PEN DRIVE IN YOUR PC AND RUN RUFUS.
INSIDE RUFUS SELECT THE IMAGE FILE AND SELECT START (AFTER SELECTING START SELECT DD MODE IN THE DIALOGUE BOX) TO CREATE A BOOTABLE PEN DRIVE (WARNING: THIS WOULD FORMAT YOUR PEN DRIVE)
NOW YOU SHOULD BOOT YOUR PC FROM THE BOOTABLE USB STICK WHICH YOU HAVE JUST CREATED
THIS WOULD MAKE YOUR PC RUN LINUX OS
TYPE PASSWORD AS linux AND ENTER
PART 4: INSTALLING TWRP AND ROOTING USING LAFSPLOIT
BEFORE PROCEEDING ENSURE YOU BOOT YOUR PHONE AND DONE ALL THE BASIC SETTINGS
NOW HEAD TO THE DEVELOPER OPTIONS IN YOUR DEVICE AND ENSURE OEM UNLOCKING AND USB DEBUGGING ARE SWITCHED ON.
NOW CONNECT YOUR DEVICE TO THE PC (RUNNING LINUX OS FROM PENDRIVE) IN DOWNLOAD MODE (SWITCH OFF YOUR MOBILE AND CONNECT THE USB FROM PC WHILE HOLDING THE VOLUME UP BUTTON SIMULTANEOUSLY)
DOUBLE CLICK ON THE LG FOLDER INSIDE FWUL DESKTOP
INSIDE THAT, DOUBLE CLICK ON LGLAF(RUNNINGNAK3D) ICON WHICH WILL OPEN A TERMINAL
ENTER THE BELOW COMMANDS
git pull
git checkout h918-miscwrte
./step1.sh
THE ABOVE COMMAND FLASHES TWRP RECOVERY ONTO YOUR DEVICE.
WAIT AND PULL OUT YOUR DEVICE WHEN IT ASKS TO.
RECOMMENDED: NOW THAT TWRP HAS SUCCESSFULLY INSTALLED, YOU CAN MANUALLY FORMAT,FLASH LATEST TWRP RECOVERY AND USE ANY METHOD LIKE MAGISK OR SU FOR ROOTING.
INSIDE TWRP RECOVERY. FIRST FORMAT USING WIPE--ADVANCED FORMAT--TYPE yes AND FULL DO A FULL FORMAT, THEN FLASH MAGISK AND THE LATEST TWRP RECOVERY BELOW.
MAGISK ZIP DOWNLOAD:
https://github.com/topjohnwu/Magisk/releases/download/v16.0/Magisk-v16.0.zip
LATEST TWRP BY PHOENIX(H918):
https://forum.xda-developers.com/v20/development/recovery-twrp-3-2-1-0-t3720239
OR
IF YOU ARE UNSURE ABOUT FORMATTING AND FLASHING, JUST USE THE BELOW COMMAND TO DO ALL THE WORK AUTOMATICALLY
CONNECT YOUR DEVICE AGAIN IN DOWNLOAD MODE AND ENTER THE FOLLOWING COMMAND
./step2.sh
THE ABOVE COMMAND FORMATS YOUR DEVICE AND FLASHES MAGISK TO ACQUIRE ROOT.
TIP : IF YOU FACE ANY ENCRYPTION ERROR AFTER USING STEP2. SH, DO A ADVANCED FORMAT WITHIN TWRP AND FLASH MAGISK AND LATEST TWRP BY PHOENIX MANUALLY.
YOU ARE NOW ROOTED WITH TWRP RECOVERY INSTALLED.
REMEMBER TO BACK UP THE CURRENT ROM BEFORE FLASHING ANYTHING..... DO CHECK POST #2 FOR OTHER TWEAKS
IF YOU WISH TO UPDATE TO LATEST STOCK (10U) AND KEEP ROOT AND TWRP, JUST FOLLOW THIS LINK AND DO REMEMBER TO ROOT USING MAGISK AFTER FLASHING THE ROM BEFORE YOU BOOT.
https://forum.xda-developers.com/v20/development/rom-h91810q-stock-rom-twrp-flashable-zip-t3681312
I WOULD LIKE TO THANK ALL THE DEVOLEPERS WHO HAVE CREATED THE ABOVE SOFTWARES WITHOUT WHICH THIS ISNT POSSIBLE.
CREDITS:
@autoprime FOR HIS UPPERCUT TOOL
@steadfasterX FOR HIS FWUL TOOL
@Phoenix591 FOR HIS WORKS ON TWRP RECOVERY
AND FINALLY, @runningnak3d FOR HIS EXCELLENT WORK IN ROOTING OUR DEVICE :good:
WHAT NEXT?
NOW THAT YOU HAVE ROOTED YOUR MOBILE, I WOULD RECOMMEND DOING THE BELOW TWEAKS FOR FURTHER ENHANCED EXPERIENCE....
1.THERMAL THROTTLING
IF YOUR ARE STILL ON A STOCK BASED ROM , I WOULD STRONGLY RECOMMEND TO RECONFIGURE YOUR THERMAL FILE TO PREVENT ANY POSSIBLE LAG WHEN USING EXTENSIVELY...
FIRST DOWNLOAD THE FILE BELOW:
https://drive.google.com/file/d/0B0W3xXHgfOxvLUpKNWhrWDE0TDg/view
USE A ROOT EXPLORER (PREFERABLY ES EXPLORER) AND GO TO ROOT/SYSTEM/ETC.
YOU SHOULD HAVE A FILE NAMED thermal-engine-8996.conf
RENAME IT TO thermal-engine-8996.conf.bak (JUST FOR A BACKUP IF ANYTHING GOES WRONG)
ENSURE THE ABOVE DOWNLOADED FILE IS IN .conf FORMAT
IF IT ISN'T , RENAME TO thermal-engine-8996.conf
NOW SAVE THE FILE TO THE SAME DIRECTORY VIZ ROOT/SYSTEM/ETC
GIVE PERMISSION TO THIS FILE TO rw-r--r-- USING THE ROOT EXPLORER ( SELECT FILE--->PERMISSION--->READ WRITE, READ, READ)
FINALLY SAVE AND REBOOT.
THIS WOULD OVERWRITE THE THERMAL LINKED PERFORMANCE OF THE CPU TO AVOID ANY LAG WHEN USING EXTENSIVELY.
2. RCTD REMOVER
ALSO I WOULD STRONGLY RECOMMEND TO REMOVE THE LG'S RCTD CCMD AND TRITON MONITORS AS THESE WOULD RUN CONTINUOUSLY IN A ROOTED LG PHONE AND CONSUME LOT OF RESOURCES...
JUST INSTALL THE RCTD REMOVER APP FROM BELOW LINK:
https://labs.xda-developers.com/store/app/com.zacharee1.rctdremoverforlg
GRANT SU PERMISSION AND CHECK THE DESIRED FILES (I CHOSE ALL THREE FILES) AND CLICK ON PATCH, FLASH IMAGE AND REBOOT (THIS WOULD PATCH THE BOOT FILE, SO AGAIN IT IS ADVISABLE TO CREATE A BACKUP OF THE CURRENT BOOT IMAGE USING TWRP OR WITHIN THIS APP ITSELF)
3. SCREEN CALIBRATION:
https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor
INSTALL KERNAL AUDITOR APP FROM PLAY STORE AND GRANT SU ACCESS
CHANGE THE BELOW VALUES WITHIN THIS APP (SCREEN SETTINGS)
Minimum RGB value = 35
Saturation Intensity = 27
Screen Hue = 1520
Screen Value = 112
Screen Contrast = 132
THIS WOULD SOMEWHAT REDUCE THE BLUE TINGE AND GHOST APPEARANCES OF THE SCREEN
CREDITS: @Holyman007 for his thermal tweak @Zacharee1 for his rctd remover app
I was just about to create a post asking for a step by step for dummies so thank you very much for this! Going to do this sometime tomorrow or Tuesday and will update if I succeed or not. :good:
Got a question. Does this method stop the second screen from working?
turdbait said:
I was just about to create a post asking for a step by step for dummies so thank you very much for this! Going to do this sometime tomorrow or Tuesday and will update if I succeed or not. :good:
Got a question. Does this method stop the second screen from working?
Click to expand...
Click to collapse
this would end up with a stock rooted phone with twrp recovery if all the methods are correctly followed..
......final result would be.... you would end up with a rooted stock rom with a twrp recovery....
your second screen will work perfectly.....
please let me know if you need a different thread for installing custom rom, and to reduce the lag., install sound mod to get maximum sound output and customize second screen... i will create a noob friendly thread for these as well......
Also check the original lafsploit thread @
https://forum.xda-developers.com/v20/how-to/root-lafsploit-h918-version-t3773443
kish9046 said:
Also check the original lafsploit thread @
https://forum.xda-developers.com/v20/how-to/root-lafsploit-h918-version-t3773443
Click to expand...
Click to collapse
Thank you, I've been reading up on the main lafsploit thread for awhile but I was still not sure about the whole flashing KDZ file and stuff so when you posted this thread it was a motivator to try it out. Got a day off from work tomorrow so gonna try it then so I don't got to worry about the time.
I'm interested in the max sound output and second screen customization if you got the time and its not to much to ask. If you want to wait till either someone else comes along thats interested or till I root just so you don't waste your time I shall update hopefully sometime tomorrow. Thanks again.
kish9046 said:
sha256sum h918-twrp.img ----> THIS WOULD AGAIN THROW A HASH, CHECK IF BOTH THE HASHES ARE ABSOLUTELY SIMILAR
Click to expand...
Click to collapse
Excellent. Just a friendly suggestion, however. I would change the instruction above to use the word EXACT instead of SIMILAR, otherwise people may continue erroneously. The hash numbers must be exact.
onlineaces said:
Excellent. Just a friendly suggestion, however. I would change the instruction above to use the word EXACT instead of SIMILAR, otherwise people may continue erroneously. The hash numbers must be exact.
Click to expand...
Click to collapse
Thanks for the heads up.... Changed to EXACT...
I successfully have root now, thank you! If you're still interested in doing a guide on how to do the second screen customization I'd be grateful.
turdbait said:
I successfully have root now, thank you! If you're still interested in doing a guide on how to do the second screen customization I'd be grateful.
Click to expand...
Click to collapse
great to hear that u have root now.... will post soon on other mods including a step-by-step process on removing rct soon....
All this stuff can be found already in the forums so you posting guides is redundant js
Sent from my LG-H910 using XDA Labs
cnjax said:
All this stuff can be found already in the forums so you posting guides is redundant js
Sent from my LG-H910 using XDA Labs
Click to expand...
Click to collapse
Thanks for the suggestion... but i thought this would help noobs like me to explore more about our device without doing any harm to it.....
Glad someone actually laid it out step by step.
kish9046 said:
Thanks for the suggestion... but i thought this would help noobs like me to explore more about our device without doing any harm to it.....
Click to expand...
Click to collapse
so i just wanted to say thank for for the very noobie step by step guide. im soooo use to odion and adb flash commands.
just 1 thing i had trouble with was trying to push magisk and twrp over. I rooted by pushing magisk over with otg but no twrp on recovery. then i saw it said it was on download mode. from dl mode i just flashed twrp to recovery.
BROKEN1981 said:
so i just wanted to say thank for for the very noobie step by step guide. im soooo use to odion and adb flash commands.
just 1 thing i had trouble with was trying to push magisk and twrp over. I rooted by pushing magisk over with otg but no twrp on recovery. then i saw it said it was on download mode. from dl mode i just flashed twrp to recovery.
Click to expand...
Click to collapse
So i assume you have both TWRP and root now?..... And can i ask which version r u in now....ARB0 or 1
kish9046 said:
So i assume you have both TWRP and root now?..... And can i ask which version r u in now....ARB0 or 1
Click to expand...
Click to collapse
Abr1 yes I am rooted with twrp.
As I said, the commands to push magisk and twrp to sd did not work. I used usb otg in twrp to push magisk, but forgot to put twrp to flash as well.
I forgot that twrp had replaced download mode, so I was going a bit nuts trying to figure out how to get twrp to recovery. Lolol
Now I'm on latest update with rtcd removed thanks to the op who hosted it on xda as a flashable zip.
Hi guys, sadly I'm at the last step and got stuck.
I did everything, and managed to get to the part where you WIPE de data using TWRP, Mount, but when I go and type
adb push Magisk...
adb push h18...
I get an error saying that Cannot stat : No such file or directory
I'm unable to figure out what I'm doing wrong
Any idea?
tenkensword said:
Hi guys, sadly I'm at the last step and got stuck.
I did everything, and managed to get to the part where you WIPE de data using TWRP, Mount, but when I go and type
adb push Magisk...
adb push h18...
I get an error saying that Cannot stat : No such file or directory
I'm unable to figure out what I'm doing wrong
Any idea?
Click to expand...
Click to collapse
As you are in twrp, you can manually flash magisk zip and twrp recovery.....
tenkensword said:
Hi guys, sadly I'm at the last step and got stuck.
I did everything, and managed to get to the part where you WIPE de data using TWRP, Mount, but when I go and type
adb push Magisk...
adb push h18...
I get an error saying that Cannot stat : No such file or directory
I'm unable to figure out what I'm doing wrong
Any idea?
Click to expand...
Click to collapse
Download magisk and twrp here https://androidfilehost.com/?fid=746010030569963731
While you are in the last step, in mount, select otg USB. You can push it to SD card and manual flash.
If you booted to system without magisk and flashing twrp, power off the phone, hold volume up, put in the USB, connect to PC. This will put you in twrp since download mode is replaced by twrp.
Now you can flash both files.
tenkensword said:
Hi guys, sadly I'm at the last step and got stuck.
I did everything, and managed to get to the part where you WIPE de data using TWRP, Mount, but when I go and type
adb push Magisk...
adb push h18...
I get an error saying that Cannot stat : No such file or directory
I'm unable to figure out what I'm doing wrong
Any idea?
Click to expand...
Click to collapse
Download magisk and twrp here https://androidfilehost.com/?fid=746010030569963731
While you are in the last step, in mount, select otg USB. You can push it to SD card and manual flash.
If you booted to system without magisk and flashing twrp, power off the phone, hold volume up, put in the USB, connect to PC. This will put you in twrp since download mode is replaced by twrp.
Now you can flash both files.
The BLU VIVO XL4 has arived.
Sorry this guide is not for very new users, it relies on certain amount of prior knowledge.
**NOTE**
Unlocking Bootloader WILL set warranty flag to "NO"
Make the read-back backup, BEFORE unlocking, so there is a possibility to restore warranty to "yes"
Getting SPFlash Tool to work on BLU VIVO XL4
I used sp flash tool version 5.18.28
Needs custom DA file and Auth file. Both have been found from a near clone device.
Open flash tool select the DA file and Auth file from the link below.
add the scatter file from archive. There is a preloader file in the archive also. This is needed for spflash tool to open the Auth file.
Stock Rom and Auth file
Then follow the guide found on youtube.
Not planning to go into too much detail about the actual pulling of the firmware, as there is already
a fantastic guide with step-by-step photos and also a video.
Just the basics
Pull stock rom with spflash tool once just from the "boot region" to get the preloader file.
Process that file with the Wwr_MTK tool to get partition table information.
And one more time pull as one large binary file from the "user region" then split it into
individual images using the tool called "Wwr_MTK" it can be found on other site(Hovatek). I cannot put a
link as it is against forum rules (no advertising other forums)
But there is a youtube video that describes the process. And gives link for download of the tool.
**NOTE-1**
The Wwr_MTK tool did not have the correct chip (mt6762 In fact the "family class" for the chip is mt6765) as an option. Because of this you will need to add it to the tool before using it. Open the downloaded zip.( I used "WwR_MTK_2.40_Eng" ). Open "Template.ini" with text editing software, in the section labeled "CPU" add "MT6765 2" , keep same format as the rest of the file. Save the changes and close Template.ini.
Now when you run the tool, you will be able to create the scatter file as you split the rom into files.
**NOTE-2**
The tool connects to internet and downloads fresh the files and scripts when you start it. There is a 30 second ad screen displayed. If you block internet to the tool, then the add screen turns into 2 minute wait screen. I am not suggesting that you hack the tool to by-pass it, just letting you know what to expect.
IT IS HIGHLY RECOMMENDED TO MAKE YOUR OWN FULL BACKUP BEFORE PERFORMING THESE STEPS
AFTER YOU HAVE MADE FULL BACKUPS
Now to start modifying
DOWNLOAD
UNLOCK BOOTLOADER
unlocking bootloader is no more complicated then then enabling OEM unlock toggle in dev options menu.
Then performing Command in terminal. Just like so many android devices.
Unlock Bootloader
1. Enable Developer options on phone:
open settings--> "about device"--> click build number 5-7 times--> go back one screen in settings
-->select more "more settings" --> scroll to bottom "Develpoer options" --> enable "usb debugging"
2. Open cmd or power shell terminal
3. reboot phone to bootloader with the following commands
Code:
adb reboot bootloader
4.Once the phone has finished loading into fastboot mode type this command
Code:
fastboot oem unlock
I also did --MIGHT be an optional step
Code:
fastboot flashing unlock
Do not think both were needed.
After each command when phone was rebooted,
it took extra time to open. But did not show the normal recovery screen while
it did the factory reset. But a reset did happen both times,
as I had the setup wizard each time.
Even after unlocking bootloader, doing a "fastboot boot *xyz.img" (boot or recovery test images)
Phone would only cycle to off then do a full reboot. Doing "fastboot flash boot boot.img" does flash the boot.
And "fastboot flash recovery recovery.img" does flash the recovery.
TWRP
1. Download TWRP From Link above
2. Enable Developer options on phone:
open settings--> "about device"--> click build number 5-7 times--> go back one screen in settings
-->select "more settings" --> scroll to bottom "Develpoer options" --> enable "usb debugging"
3. Open cmd or power shell terminal
4. reboot phone to bootloader with the following commands
Code:
adb reboot bootloader
5. Now give the command to flash twrp, assuming you downloaded the file to default download folder
Code:
fastboot flash recovery %userprofile%\downloads\TWRP-3_2_3-1020-OMFG-mod_b6-device-name-vivo-wipe-misc.img
5. Reboot to twrp. Needed to boot directly to twrp, or stock recovery will be re-flashed by phone.
Code:
fastboot oem reboot-recovery
Once inside twrp It is asking for password to unlock (decrypt)***automatic decrypt not work on this device as of YET***
this is supposed to be same password used to unlock phone.
Because this twrp does not work with encryption, every time you reboot you will have to select language, if changed from default.
To get recovery to be functional, you need to make phone patched for both "DM-Verity" and "Force-encryption"
I do this with
"Universal Disabler"
https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
There is similar utiliy built into this Recovery image.
to use the built in option , Select ADVANCED, Then RM Forceencrypt
This will flash the lazypatcher with options set to remove encryption both in boot.img and /vender/*fstab : remove dm-verity.
--OR-- manually do the following steps
Steps
1. Download Zip from Link above.
2. Open TWRP
3. Open Wipe menu
4. Select format /data
5. Key in "YES" and swipe
6. Return to Home Page of TWRP
7. Choose reboot menu then recovery
8. Recovery should now have access to Internal memory (temp for now)
9. Use abd push to put the zip file downloaded above to internal memory
Code:
adb push %userprofile%\downloads\Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip /sdcard/
10. Select install menu , and install the Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip
Do not rename the file. It installs and makes the patch base on the file name.
If you want to have root also, then flash Magisk at this point.
Now the dm-verity and force encryption are off. You can flash gsi custom rom, if you desire. At the moment, I have only been able to boot the phone with working cell data and calls on the PHH-Phusion --vanilla builds. Do not know why the gapps versions do not allow rill to function.
As of the writing of this I have put up V4 of the TWRP port. This version uses the correct mount points for this phone, not the ones from the source of the port. Also corrected the device name in default.prop, to match device name. Build fingerprint has been left as is. Fixed the micro sdcard name and OTG names. Added mipe to the "misc" /"para" partition to escape a factory reset recovery loop that [uu]could[/u] happen under certain situations.
And my prefered ported recovery from LRTeam TWRP-3_2_3-1020-OMFG-mod_b6-device-name-vivo-wipe-misc.img.
DOWNLOADS
Files
1. Sp Flash tool (v 5.18.28 or newer) https://androidmtk.com/smart-phone-flash-tool
2. stock XL4 ROM, DA file, TWRP all in shared folder https://androidfilehost.com/?w=files&flid=287088
3. stock Xi+ ROM, TWRP in shared folder https://androidfilehost.com/?w=files&flid=287703
4. Unviversal DM-Patch disable tool thread
5. Youtube Guide Video to use backup image splitter tool "WWR_MTK" https://www.youtube.com/watch?v=GMAytZ56hac
Kernel sources have been published 12-12-2018, by BLU
I have them synced to GitHub while I make test builds.
https://github.com/mrmazakblu/BLU-VIVO-XL4-kernel
Default defconfig should be arch/arm64/config/k62mv1_64_bsp_defconfig. Based off of build description in "getprop"
Built kernel has not been able to be booted yet.
TWRP is first ported and provided thanks to @Voinea12
.
placeholder not really welcomed here on XDA
just pm a moderator or report this thread when you`re ready to upload something, until then, thread closed
After seeing that the Blu vivo xl4 requires an "auth file" in order to flash with spflash tool, I asked BLU to supply the file.
They responded with a big fat NO.
.......
.......
THE NEXT DAY THE FILE WAS POSTED ON A DIFFERENT THREAD.
SO THERE HELP WAS NO LONGER NEEDED.
Just made successfull readback on preloader. and currently reading full rom.
will post link when done.
here is auth file and DA file I used.
pulled firmware is here.
there are more images in complete firmware, but the ones included should be enough , as long as you NEVER do format all from spflash tool.
STOCK ROM
So far all attempts to load twrp have failed.
Also just tried to flash boot.img with the built kernel. When rebooted, phone just stayed on black screen. No back-light , nothing.
Just a repeating connect disconnect sound from pc. Long pressing power and trying to get into the bootloader menu failed.
Was able to Que up sp flash tool and keep holding the volume down button , on the next time it cycled on off preloader was caught and i was able to flash back the correct boot.img.
Working version is available now
Thread was opened.
mrmazak said:
So far all attempts to load twrp have failed.
Also just tried to flash boot.img with the built kernel. When rebooted, phone just stayed on black screen. No back-light , nothing.
Just a repeating connect disconnect sound from pc. Long pressing power and trying to get into the bootloader menu failed.
Was able to Que up sp flash tool and keep holding the volume down button , on the next time it cycled on off preloader was caught and i was able to flash back the correct boot.img.
Click to expand...
Click to collapse
My streak with SP Flash is still a losing one, the auth file works for my phone as well (Blu Vivo XI+), I just used the preloader.img that was in the update.zip and ran it through the WwR MTK Tool and got the preloader.bin to go with the auth file as you indicated you had done, that was one hurdle that your post helped me solve, but for some reason when I start reading the full rom I get about 6-10 MB into it and then it disconnects from my phone and stops. Not sure if its driver related or what, which drivers did you use for the readback?
psychofad said:
My streak with SP Flash is still a losing one, the auth file works for my phone as well (Blu Vivo XI+), I just used the preloader.img that was in the update.zip and ran it through the WwR MTK Tool and got the preloader.bin to go with the auth file as you indicated you had done, that was one hurdle that your post helped me solve, but for some reason when I start reading the full rom I get about 6-10 MB into it and then it disconnects from my phone and stops. Not sure if its driver related or what, which drivers did you use for the readback?
Click to expand...
Click to collapse
To be honest I have not installed driver specific for this. I have vcomm drivers installed, same from couple years ago.
Is the readback stopping because you set wrong hex address length in the readback tab?
mrmazak said:
To be honest I have not installed driver specific for this. I have vcomm drivers installed, same from couple years ago.
Is the readback stopping because you set wrong hex address length in the readback tab?
Click to expand...
Click to collapse
No, I got the readback of the EMMC_USER just fine and ran it through the WwR MTK tool and it gave me the hex address to use for the full rom readback, t then told me
Code:
The file size is smaller than the start position of the LK (uboot). To determine the type of processor and memory, it is necessary to read the full firmware in the SP Flash Tool, specify the parameters for reading: Start address: 0x0, Lenght: 0x1D1EC00000.
So I entered those two addresses as EMMC_USER readback. If my phone is off and I just connect it to the usb without holding any keys it gives me another error.....and I'm an idiot. just figured it out as I was looking at logs, apparently I must have changed the usb speed in sp flash which changes it's pid causing it to try and read from another port. It's downloading now
Thanks to @hanuma there is now a material themed twrp port.
The V2 version loads. But has no adb or mtp access
https://forum.xda-developers.com/showpost.php?p=78498431&postcount=95
https://mega.nz/#F!225EzQwT!t8hvGvmFoNYNvXev-Li1fQ
******EDIT*****
Most of the following problems did not repeat in same way when I tried to repeat the install process.
Main issue was with simcard. But exact process to get installed and working is still not known.
-- install after already having rooted, encryption removed stock, seems to work.
-- fresh full stock rom, full encryption, then gsi seems to not work sim card.
PHH-treble gsi images do boot this device. I do not have a bug list as yet.
working:WITH encryption removed:
1. wifi
2. camera
3. fingerprint- unlock
4. music
5. video
NOT working :WITH encyyption removed:
1. cell signal
2. cell data
3. phone
4. sms
---------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------
working:WITH encryption enabled
1. phone
2. sms
NOT working:WITH encryption enabled
1.. everything else
EDIT
Much of the force closing problems were from a corrupted external sdcard. When I removed the card , the force close messages did not come.
Getting 4G data connection was not stable. after a full reset and rom re-install I was not able to get data connection, and only able to have connection to make calls when set to 3G connection only.
some bugs in vendor I assume will need some help solving this.
EDIT 2
Finally got around to trying again. his time I started with vanilla version of phh-treble gsi.
4G data and sms, calls in out all work. Camera , video both work.
WiFi tethering did not work.
Setup that worked :
force encryption removed with universal dm-verity patcher, ( bothboot.img and vendor partitions both edited).
magisk patched boot
Would this work on Blu Vivo XI since same chipset?
sinkoo1979 said:
Would this work on Blu Vivo XI since same chipset?
Click to expand...
Click to collapse
It should. I have been working with few users with Xi+ it works for them. And another user of Xi provided a twrp port, but no details on if this read-back worked. It must have, I suppose it must have.
Please do try to do the readback for your self, and share the files. will help with twrp if I can
Guide has been revised.
The original guide suggests to format /data and patch device to remove force encryption. This works fine for stock rom, and modifying stock rom. But I have found that removing encryption will not allow the phone to work as a phone when flashed with GSI. The down side is, at the moment, there is no twrp that is working to read the encrypted /data.
mrmazak said:
Guide has been revised.
The original guide suggests to format /data and patch device to remove force encryption. This works fine for stock rom, and modifying stock rom. But I have found that removing encryption will not allow the phone to work as a phone when flashed with GSI. The down side is, at the moment, there is no twrp that is working to read the encrypted /data.
Click to expand...
Click to collapse
Can any of this be done without a computer
Decaphyz said:
Can any of this be done without a computer
Click to expand...
Click to collapse
No, you need fastboot(PC preogram) to unlock bootloader and either sp flash tool or fastboot to flash recovery.
mrmazak said:
No, need you fastboot(PC preogram) to unlock bootloader and either sp flash tool or fastboot to flash recovery.
Click to expand...
Click to collapse
Oof
mrmazak said:
Thanks to @hanuma there is now a material themed twrp port.
The V2 version loads. But has no adb or mtp access
https://forum.xda-developers.com/showpost.php?p=78498431&postcount=95
https://mega.nz/#F!225EzQwT!t8hvGvmFoNYNvXev-Li1fQ
Click to expand...
Click to collapse
I just did this, and it worked the first time. I got into the phone and set it up. But it was super laggy after a while. So I decided to reset the phone like how you would normally do to fix a problem, and now... it’s making me boot into the recovery each and every time I try and boot into the system... i installed the gsi rom "PixelExperience for AOnly" at max lees site
IndifferentBear said:
I just did this, and it worked the first time. I got into the phone and set it up. But it was super laggy after a while. So I decided to reset the phone like how you would normally do to fix a problem, and now... it’s making me boot into the recovery each and every time I try and boot into the system... i installed the gsi rom "PixelExperience for AOnly" at max lees site
Click to expand...
Click to collapse
dont panic. this is minor bug. Easiest way to solve is to flash stock recovery. and do factory reset from there.
You can install image from twrp or fastboot, even spflashtool.
It is from the flag that is set into para(misc) partition.
You can clear it manually with terminal also, or even use one of the othe rtwrp images I shared. One with "misc" in the file name.
If you use one of those recoveries and do reset will also clear that reboot condition
mrmazak said:
dont panic. this is minor bug. Easiest way to solve is to flash stock recovery. and do factory reset from there.
You can install image from twrp or fastboot, even spflashtool.
It is from the flag that is set into para(misc) partition.
You can clear it manually with terminal also, or even use one of the othe rtwrp images I shared. One with "misc" in the file name.
If you use one of those recoveries and do reset will also clear that reboot condition
Click to expand...
Click to collapse
thanks dude! can you give me the command to run in terminal to do it? ill try that first, then ill try flashing stock recovery!
---------- Post added at 02:47 AM ---------- Previous post was at 02:44 AM ----------
mrmazak said:
dont panic. this is minor bug. Easiest way to solve is to flash stock recovery. and do factory reset from there.
You can install image from twrp or fastboot, even spflashtool.
It is from the flag that is set into para(misc) partition.
You can clear it manually with terminal also, or even use one of the othe rtwrp images I shared. One with "misc" in the file name.
If you use one of those recoveries and do reset will also clear that reboot condition
Click to expand...
Click to collapse
but i was required to wipe the sys, data, cache, and dalvik/art to have a clean install.
---------- Post added at 03:33 AM ---------- Previous post was at 02:47 AM ----------
mrmazak said:
dont panic. this is minor bug. Easiest way to solve is to flash stock recovery. and do factory reset from there.
You can install image from twrp or fastboot, even spflashtool.
It is from the flag that is set into para(misc) partition.
You can clear it manually with terminal also, or even use one of the othe rtwrp images I shared. One with "misc" in the file name.
If you use one of those recoveries and do reset will also clear that reboot condition
Click to expand...
Click to collapse
YO! Oaky so basic laly when i flashed that misc recovery IT BOOTED!!!!! thank you soo much dude, your the best!
Background:
So, I recently bought the, “Ulefone Armor 6” Android phone. I didn't do much research into rooting the phone before I bought it, however tonight I did and couldn't find any solution. So I made my own.
Disclaimer:
I am not responsible if you damage, brick, or willingly alter your phone in any way shape or form blah blah blah, you get the point.
Prerequisites:
Make sure you have drivers installed, here.
Rooting process:
1. Obtain a local copy of the, “boot.img” file from the stock rom archive, which can be found on the, “Ulefone” website.
2. Download the compressed file of your choice, "EU" or "Non-EU." (Ex. I downloaded the one for, "Non-EU" which is, "Armor_6_RF1_V01_user_20190329.tar.gz")
3. Extract the downloaded file in the location of your choice, using your favorite archive extractor (7-zip, winzip, winrar, etc...)
4. To begin the root process, Download the android app or .apk file "Magiskmanager.apk" from the Magisk Manager website, and install it in your, Armor 6 device. (Note: the Play Store does not have the, Magisk Manager app.)
5. Now pass the, "boot.img" file downloaded earlier from your computer to your Armor 6 device. Place the "boot.img" file preferably in the "downloads" folder of your Armor 6 device.
6. Open up the Magisk Manager app, and click, "install 19.3" (or what ever is the current version is) then click, "Select and Patch a File".
7. Locate your, "boot.img" file you placed in your downloads folder, and patch it with Magisk Manager. (Note: This step will create another file named, "Magisk_patched.img" in your device.)
8. After Magisk Manager has patched your file, pass the patched file from your downloads folder, back onto your computer. (Note: Not necessary but customary, to rename the patched file to, "boot.img")
9. Now, in your Armor 6 phone, go to your settings, scroll down to system click it, click on about phone, and then tap the crap out of build number, until you have become a developer.
10. Go back from about phone, click on developer options, and tick on "OEM unlocking." also scroll down and tick, "USB debugging."
11. Download ADB tools with fastboot from Android/Google.
12. With the phone connected to the computer, open up the folder where ADB is located in command prompt and type, "adb reboot bootloader"
13. Now that you are in fastboot mode, type the following prompts into the command. (NOTE: the following commands will WIPE your phone clean to stock, so backup any important files/documents before you wipe.)
fastboot oem unlock
OR (if the first one fails, try the second one)
fastboot flashing unlock
14. Once you have unlocked your bootloader, reboot the phone, "fastboot reboot", wait till the phone boots up, go through the setting up process, enable USB debugging again (Step 13), install magisk manager again, and "adb reboot bootloader" in adb command prompt.
15. Once in fastboot mode again, flash the patched, "boot.img" file. (Note: This command will not wipe your device.)
fastboot flash boot boot.img
16. Reboot the phone once more, open up magisk manager, and enjoy root.
A lot of steps yes, but simple easy to do.
Note: that the basis of my instructions on telling you what to do is my assumption of you the end user having basic if not full knowledge of what I am talking about. Because I wont be providing help for basic knowledge, if that makes sense. I do not plan on making a video as this tutorial is mainly meant for users who already know what of the majority they are doing with the tools they are using. If anyone wants to make a video feel free to share it here, I will added to the thread. thanks!
UPDATE 1.0:
I organized a thread on this link, with everything needed to root, twrp, and stock image.
UPDATE 1.2:
Re-organized this thread. Removed a few steps. Added more detail to this thread specifying a few things.
Extosis said:
Story:
I recently bought the, Ulefone Armor 6 Android phone. Didn't do much research into rooting before I bought it, however tonight I did and couldn't find any solution. So I made my own.
Disclaimer:
I am not responsible if you damage, brick, or willingly alter your phone in any way shape or form blah blah blah, you get the point.
Rooting procedure:
1. Get a local copy of the boot.img file from the Ulefone website (To make things simpler for you, Ulefone.com/index.html > Scroll down and click on "download" > Select your device model "Armor series" "Armor 6" > Scroll all the way down and click the download button for "The latest rom".)
2. Now you are at the google drive folder from Ulefone, with the files you need. Select EU if you have the EU version, or Non-EU for any other country.
3. Download the compressed file of your choice EU or Non-EU. (Ex. I downloaded the one for Non-EU which is, "Armor_6_RF1_V01_user_20190329.tar.gz")
4. Open the file in your favorite archiver software, 7-zip, winrar, etc.... open the first folder in the archive, and extract "boot.img"
5. Download, "Magiskmanager.apk" from their Magisk Manager, and install it in your, Armor 6 phone.
7. Pass the, "boot.img" file from your computer to your cellphone. Preferably the "downloads" folder.
8. Open up Magisk manager, and click install 19.3 (or what ever is the current version) then click "Select and Patch a File".
9. Find your "boot.img" file and patch it with magisk manager.
10. After magisk manager has patched your file, pass the patched file, back onto your computer.
11. Now, in your Armor 6 phone, go to settings, scroll down to system and click it, click on about phone, and then tap the crap out of build number, until you become a developer.
12. Go back from about phone, click on developer options, and tick on "OEM unlocking".
13. Scroll down and tick on USB debugging.
14. Download your ADB tools with fastboot from android/google.
15. With the phone connected to the computer, open up the folder where ADB is located in command prompt and type, "adb reboot bootloader"
16. Now that you are in fastboot mode, type the following prompts into the command. (NOTE: the following commands will WIPE your phone clean to stock, so backup any important files/documents.)
fastboot oem unlock
OR (if the first one fails, try the second one)
fastboot flashing unlock
17. Once you have unlocked your bootloader, reboot the phone "fastboot reboot", wait till the phone boots up, go through the set up process, enable USB debugging again (Step 13), install magisk manager again, adb reboot bootloader in adb command prompt.
18. Once in fastboot mode again, flash the patched boot.img file.
fastboot flash boot boot.img
19. Reboot the phone once more, open up magisk manager, and enjoy root.
A lot of steps yes, but simple easy to do.
Note: that the basis of my instructions on telling you what to do is my assumption of you the end user having basic if not full knowledge of what I am talking about. Because I wont be providing help for basic knowledge, if that makes sense.
Click to expand...
Click to collapse
Nice work around for a phone that doesn't have Twrp
([emoji813]9/[emoji725]/9[emoji813])
PoochyX said:
Nice work around for a phone that doesn't have Twrp
([emoji813]9/[emoji725]/9[emoji813])
Click to expand...
Click to collapse
Upon doing a bit more research, the phone actually has TWRP & a TWRP fork.
How do we know we can trust you? I'm a nubee as I've said.
SteeleB89 said:
How do we know we can trust you? I'm a nubee as I've said.
Click to expand...
Click to collapse
Then this isnt for you and stick with stock... Stock honestly works just certain people want greater freedom with thier phones only issue is with that you yourself at greater risk of breaking something and wouldn't know how to fix it and in situations like that factory restores wouldn't even save you because the system partition doesn't go back to the way it was with a factory restore
Sent from my SM-J327P using Tapatalk
I understand and accept the risk. I'm asking if this is a legit fix or some attempt to put malware on my phone.
SteeleB89 said:
I understand and accept the risk. I'm asking if this is a legit fix or some attempt to put malware on my phone.
Click to expand...
Click to collapse
Well to start with, I didn't attach anything in this thread, only photos.
1. You bought the phone, a phone that is made from a Chinese company, odds are that it already has malware, backdoors, or things you don't want on the OS.
2. Like I said, I didn't attach anything for you to download, so I am not infecting you with anything. Fastboot even comes with Google SDK.
3. Magisk is a wide known group who release root for the public to download/install. Just like TWRP, clockworkmod, cynaogenmod, etc...
4. If you don't feel comfortable doing this process, then like stated above, you should probably feel safer staying with stock & no root.
As I am sure, everyone who mod their devices are fully aware of the consequences of exploiting their devices. Brinking, killing, or messing something up.
Cheers.
For the life of me I cannot get the drivers to install. I've tried on Windows 10 and 7, but can't get fastboot to recognize the device. ADB works just fine, but Windows won't recognize the device when in recovery. I tried the official Ulefone drivers for Windows 10 and 7, as well as the MTK/VCOM usb drivers through manual installation.. How did you get it working? What other drivers are you using?
A.Fitz said:
For the life of me I cannot get the drivers to install. I've tried on Windows 10 and 7, but can't get fastboot to recognize the device. ADB works just fine, but Windows won't recognize the device when in recovery. I tried the official Ulefone drivers for Windows 10 and 7, as well as the MTK/VCOM usb drivers through manual installation.. How did you get it working? What other drivers are you using?
Click to expand...
Click to collapse
I have literally used the "driver installer" from the Ulefone website. Install the MTK/VCOM Drivers.
Adb gets detected in TWRP & Fastboot is found on my computer just fine.
My suggestion would be to check if your anti-virus (if you have one) if it's blocking the drivers from being installed.
Ps: I have the latest Windows 10 1903 x64 Edu and the drivers work perfectly.
Will try at end of month and tell you guys the result later.
Hi!!!
Thanks for the tutorial. I managed to root my Ulefone Armor 6.
Just one thing, maybe it will be nice to add in the tutorial (suggestion): Magisk generates another boot.img file, called magisk_patched. That is the one to be used on step 17 (rename it before).
One question. If I do a factory reset, will the phone remain rooted? Can't remember for the life of me from past roots I've done.
Stabys said:
Hi!!!
Thanks for the tutorial. I managed to root my Ulefone Armor 6.
Just one thing, maybe it will be nice to add in the tutorial (suggestion): Magisk generates another boot.img file, called magisk_patched. That is the one to be used on step 17 (rename it before).
One question. If I do a factory reset, will the phone remain rooted? Can't remember for the life of me from past roots I've done.
Click to expand...
Click to collapse
Oh most definitely. I am actually going to add more detail to this tutorial once I have the free time to do so. This tutorial was mainly supposed to be like a rough idea on how to do it. However yes, I did a factory reset not to long ago and root was maintained.
Update:
Added more information and cleaned the thread up.
Well, IDK if that's a common understanding or even if it's going to happen to everybody but.. Ulefone released an software update that undid the root and reinstalled every single native app that I had uninstalled. I tried rooting again, buuut they did not put the new rom in their website yet, so my phone got stuck in boot XD. So I reinstalled the ROM available using SP Flash Tool (thank god that worked, lost some information but that's fine).
I'm not sure if I'm going to root it again when they release the ROM in the website.. I wanted root so I could make Cerberus an native app, but even though I can do it, if the phone is reset Cerberus loses my account information, so it is no use to me.
English is not my native language, but I guess that's pretty understandable
@edit: They did not release the new rom in the official website.. I did not look into the Mega or Drive link actually.
Stabys said:
Well, IDK if that's a common understanding or even if it's going to happen to everybody but.. Ulefone released an software update that undid the root and reinstalled every single native app that I had uninstalled. I tried rooting again, buuut they did not put the new rom in their website yet, so my phone got stuck in boot XD. So I reinstalled the ROM available using SP Flash Tool (thank god that worked, lost some information but that's fine).
I'm not sure if I'm going to root it again when they release the ROM in the website.. I wanted root so I could make Cerberus an native app, but even though I can do it, if the phone is reset Cerberus loses my account information, so it is no use to me.
English is not my native language, but I guess that's pretty understandable
@edit: They did not release the new rom in the official website.. I did not look into the Mega or Drive link actually.
Click to expand...
Click to collapse
Yeah, I think their new rom has a few security updates as well as other updates.
I haven't updated as of yet, because I fear I will lose root. However if I ever do, I'll update everyone if successful.
I understand you very well too.
Hello again..
I've decided to stay on 2019.03.29 update.. Just to be able to uninstall those da** native apps..
I'd appreciate if you post here if or when you have any news about root in the latest wireless update.
Then again, can't say thanks enough.
Cheers.
Stabys said:
Hello again..
I've decided to stay on 2019.03.29 update.. Just to be able to uninstall those da** native apps..
I'd appreciate if you post here if or when you have any news about root in the latest wireless update.
Then again, can't say thanks enough.
Cheers.
Click to expand...
Click to collapse
Hello it's been a while.
I have updated to the latest version by Ulefone for our Armor 6's.
Version: 2019.06.05.
I was able to root it again, using the same method in this thread.
As for the native apps, I haven't tried to remove them, however I am sure it is possible to.
HELP!
Guys, I need some help here. For some reason I'm not able to find the file in the downloads folder. When i go to Magisk, the file is there, however I cannot find it with any file explorer or through the PC. Any help here??
Extosis said:
Background:
So, I recently bought the, “Ulefone Armor 6” Android phone. I didn't do much research into rooting the phone before I bought it, however tonight I did and couldn't find any solution. So I made my own.
Disclaimer:
I am not responsible if you damage, brick, or willingly alter your phone in any way shape or form blah blah blah, you get the point.
Prerequisites:
Make sure you have drivers installed, here.
Rooting process:
1. Obtain a local copy of the, “boot.img” file from the stock rom archive, which can be found on the, “Ulefone” website.
2. Download the compressed file of your choice, "EU" or "Non-EU." (Ex. I downloaded the one for, "Non-EU" which is, "Armor_6_RF1_V01_user_20190329.tar.gz")
3. Extract the downloaded file in the location of your choice, using your favorite archive extractor (7-zip, winzip, winrar, etc...)
4. To begin the root process, Download the android app or .apk file "Magiskmanager.apk" from the Magisk Manager website, and install it in your, Armor 6 device. (Note: the Play Store does not have the, Magisk Manager app.)
5. Now pass the, "boot.img" file downloaded earlier from your computer to your Armor 6 device. Place the "boot.img" file preferably in the "downloads" folder of your Armor 6 device.
6. Open up the Magisk Manager app, and click, "install 19.3" (or what ever is the current version is) then click, "Select and Patch a File".
7. Locate your, "boot.img" file you placed in your downloads folder, and patch it with Magisk Manager. (Note: This step will create another file named, "Magisk_patched.img" in your device.)
8. After Magisk Manager has patched your file, pass the patched file from your downloads folder, back onto your computer. (Note: Not necessary but customary, to rename the patched file to, "boot.img")
9. Now, in your Armor 6 phone, go to your settings, scroll down to system click it, click on about phone, and then tap the crap out of build number, until you have become a developer.
10. Go back from about phone, click on developer options, and tick on "OEM unlocking." also scroll down and tick, "USB debugging."
11. Download ADB tools with fastboot from Android/Google.
12. With the phone connected to the computer, open up the folder where ADB is located in command prompt and type, "adb reboot bootloader"
13. Now that you are in fastboot mode, type the following prompts into the command. (NOTE: the following commands will WIPE your phone clean to stock, so backup any important files/documents before you wipe.)
fastboot oem unlock
OR (if the first one fails, try the second one)
fastboot flashing unlock
14. Once you have unlocked your bootloader, reboot the phone, "fastboot reboot", wait till the phone boots up, go through the setting up process, enable USB debugging again (Step 13), install magisk manager again, and "adb reboot bootloader" in adb command prompt.
15. Once in fastboot mode again, flash the patched, "boot.img" file. (Note: This command will not wipe your device.)
fastboot flash boot boot.img
16. Reboot the phone once more, open up magisk manager, and enjoy root.
A lot of steps yes, but simple easy to do.
Note: that the basis of my instructions on telling you what to do is my assumption of you the end user having basic if not full knowledge of what I am talking about. Because I wont be providing help for basic knowledge, if that makes sense. I do not plan on making a video as this tutorial is mainly meant for users who already know what of the majority they are doing with the tools they are using. If anyone wants to make a video feel free to share it here, I will added to the thread. thanks!
UPDATE 1.0:
I organized a thread on this link, with everything needed to root, twrp, and stock image.
UPDATE 1.2:
Re-organized this thread. Removed a few steps. Added more detail to this thread specifying a few things.
Click to expand...
Click to collapse
babyboy_legolas said:
Guys, I need some help here. For some reason I'm not able to find the file in the downloads folder. When i go to Magisk, the file is there, however I cannot find it with any file explorer or through the PC. Any help here??
Click to expand...
Click to collapse
After I did the last flash with the boot.img, the phone keeps rebooting and rebooting. its like something on that image is wrong. the thins is, giving the fact the phone is continuing booting. How can i put it again to flash the original boot.img?
babyboy_legolas said:
After I did the last flash with the boot.img, the phone keeps rebooting and rebooting. its like something on that image is wrong. the thins is, giving the fact the phone is continuing booting. How can i put it again to flash the original boot.img?
Click to expand...
Click to collapse
To put the phone in manual fastboot mode, you have to power off your device first. By pressing both, "power button + volume down button" until you feel the phone vibrate.
Once the phone vibrates, quickly press, "Power button + volume up button" to view the fastboot/recovery/normal boot menu options. To select fastboot use the volume buttons.
Volume up = select
Volume down = move down through options.
Hi!
Oh I tried it once more now and managed to do it.
I did it with the ROM from Mega (20190605).
Thanks again!
Welcome to this little thread in which I'll provide every useful information about this device based on my and other users's experiences. If you know something, that I didn't mention, please reply to this thread in order to help out each other even more effectively. Thanks and pleasant reading!
The Lenovo S5 Pro is a very decent mid-ranger with good specs and even better pricing. We all know, that chinese manufacturers tend to install bloatware on their products time to time. In our case, Lenovo didn't release a single update since 2018 Novemer to this device. It means, that it came out with Android 8.1 Oreo (2018 November Security Patch) and left untouched. This is even worse, than Meizu which is famous for it's neglecting policy of software updates for global users. Now, that we know all this, it's not a surprise, that we are here on our favourite developer forum.
*** General information | Links | Downloads | Credits ***
The official global firmware is now saved and available (thanks to our forum member nikosddesign) here: download & link to the post
Everything you will possibly need (PC software, drivers, stock camera app, VoLTE modem etc...) is available in this Yandex Disk, you just have to navigate to each one. (Most of the content is in russian, since Yandex is the russian Google, but it's not hard to find the files you'll need).
The previous links and the following tutorials are only available, because suninterbru (from 4pda forums) and radiationofthenation provided these informations and the tutorials, also so much thanks to everybody on the 4pda forums, who provided useful information and files, большое спасибо!
Even though the bootloader unlock, TWRP install and rooting should not cause data loss, be careful and create a backup. You can back up only your files and data or your whole ROM, it's up to you.
Please note, that after you've unlocked your bootloader, everytime your reboot or turn on your phone a warning will pop up during the boot process for about 1 second. On Android 9.0 Pie vendor the message pops up for about 5 seconds. The warning is about the side effects of modifying the system software and it also says, that it is not recommended to store any personal data on your device anymore. Please ignore this message, since it's only popping up, because manufacturers usually don't like, if you modify your device.
Pro tip: If you keep pressing your power button for a little longer you can skip the alert and boot faster.
*** Bootloader unlock ***
Please note, that your warranty will become invalid/void after you unlock your bootloader or root your device.
0. In your device's developer settings enable bootloader/OEM unlock and USB debugging.
1. Visit the official ZUI bootloader unlock website.
2. Enter your IMEI1 number in the first field. (You can find your IMEI numbers in Settings\About or in the dialer enter: *#06#).
3. Enter your serial number in the second field. (You can find your serial number in the fastboot menu). The one in the settings is not good in this case! (To access the fastboot menu, turn off your phone, then press the power button and after you see your screen light up, immediately press the volume down (-) button or while it's turned on and USB Debugging is enabled, simply type in the terminal/cmd ,,adb reboot bootloader").
4. In the next field enter your email adress. (Please note, that Tutanota won't work, Gmail is recommended or other not secure email providers).
5. Enter the verification numbers in the last field.
6. Tick the checkbox.
8. Click on the blue button.
7. Now check your inbox and/or spam folder, because Lenovo just sent you your custom sn.img, only for your phone.
8. Save the sn.img to your PC and install ADB drivers system-wide. (Thank you Snoop05 for your work)!
9. Open a terminal/cmd on Windows. You should be in the same directory, where your sn.img file is, with the terminal. To change directories type ,,cd your directory goes here" and hit ENTER.
10. Run the following commands:
- adb reboot bootloader
- fastboot flash unlock sn.img
- fastboot oem unlock-go
11. Congratulations! Your bootloader is now unlocked!
*** TWRP Recovery ***1. Download the .img file from here.
2. The steps are similar to the bootloader unlocking:
- adb reboot bootloader
- fastboot flash ,,downloaded" .img
- After the flashing is done DON'T reboot to the system, instead navigate to the ,,Reboot Recovery or Recovery Reboot" option and select it. (Volume keys and power key - you know the drill) This will ensure, that the TWRP Recovery doesn't get ereased on reboot(s)!
3. After you've successfully rebooted into TWRP, you should root your device with Magisk, to prevent the recovery erasure!
*** ROOT ***1. The good old SuperSU is no longer in the picture, but don't worry a new player is in the game. Download Magisk from here. (Thank your for your work topjohnwu)!
2. After you've downloaded the flashable .zip copy it to the main directory/root of your device.
3. Reboot to TWRP.
4. Click install, select the flashable .zip file.
5. The installation process should start.
6. Reboot, after finished.
7. Check if Magisk Manager is installed or not, if yes tap and update it.
8. If you did not succeed, please check the Magisk topic for solutions or reply to this thread.
*** Factory reset | Stock ROM | Unbrick | LOST IMEI/PERSIST/EFS | QCN BACKUP/RESTORE ***
!!! NEVER EVER TICK ,,ERASE ALL BEFORE DOWNLOAD" IN QFIL, OTHERWISE YOU WILL LOSE YOUR IMEI AND THE ABILITY TO CONNECT TO MOBILE NETWORKS !!!
If you accidentally clicked on that option you will have to restore someone elses QCN backup. (It will not work, if you backup your own QCN and rewrite your IMEI and restore it, so do not waste your time with that)! Luckily, a member of the 4PDA forums published their qcn backup. (большое спасибо geepnozeex)! QCN backup for Lenovo S5 Pro. (I modified the link, because the original one is no longer valid)
1. Download the linked QCN file.
2. Make sure, that you are on one of the Stock ROMs, however the recommended ROM is this one.
3. You will have to be rooted to put your device in diagnostics mode. To do that, follow this tutorial.
4. You will have to edit the QCN file with HxD, in order to write your own IMEI into.
5. Open the file with HxD and search for 08 8A 76 06 06 14 57 95 32. This is the IMEI 2. You will have to insert your IMEI 2 from the box here, but first you will have to convert it into Hexadecimal numbers.
6. Convert your IMEIs into Hexadecimal numbers here.
7. You will have to rewrite and insert your values insted of the previous one.
8. Search for 08 8A 76 06 06 04 67 98 72. This is IMEI 1. Convert your IMEI 1 into Hexadecimal numbers, too and replace.
9. Save the file (Ctrl + s)
10. Open QFIL and click on Tools, then QCN Backup/Restore.
11. Choose the QCN file, you wrote your IMEI into.
12. Click on Restore QCN.
13. There is a chance, that the process/progress bar won't finish till the end. No problem, just reboot to EDL mode through TWRP/Advanced and restore the recommended stock ROM.
14. You should have everything working fine, now.
To factory reset or unbrick your device, follow this tutorial on 4PDA. [Don't panic you don't have to know russian, just follow the instructions on the pictures! To see the pictures, click on the bold text.] ,,(спойлер (+) (Инструкция по прошивке)" ~ or ~ Download any of the previously linked STOCK ROMs to your device's main folder and flash them through TWRP. Most of them are in flashable .zip formats and should work well. A simple factory reset in TWRP is recommended before installing any of the ROMs, be careful this action will erease your data from your phone!
(Please note, that most of the time you'll have to use the QPST/QFIL method, because the flashable .zip files always expect a specific vendor version, usually a lower one, so you can upgrade with flashable .zips, but possibly can't downgrade, so you have to use QFIL)!
*** GSI custom ROMs ***
Our device is arm64-aonly, so please only use according GSIs. Note, that I will link only those GSIs, which are booted successfully on my device!
~ phhusson's official GSI list: here
~ phhusson's AOSP GSI (Android Open Source Project): here
~ developerluke's ExpressLuke GSIs: here
~ eremitein's CAOS GSI Project: here
~ eremiten's LOSQ GSI Project: here
~ igors1974's Amber GSIs: here
~ tunasahinn's and yek4perf's Tunahan's GSI builds: here
~ mrsshunt3r's albus-gsi: here
Note, that you should keep up with the developments and update your system, if needed! These are just a few GSIs, that I've tested personally on my phone, but you can always keep up with the latest news and try new GSIs out, thanks to phhusson's official GSI list!
*** How to flash an Android 10 GSI ***
1. Download the latest custom phh-magisk from here. (Thank you developerluke and phhusson)!
2. Download the latest Disable_Dm-Verity_ForceEncrypt from here. (Thank you Zackptg5 and others)!
3. Download your desired GSI.
4. You can flash from an USB-OTG flash drive or from the storage of your phone. (I personally have a dedicated USB for this purpose).
4.1 If you are coming from stock ROM you will most likely need to Format Data in this step, because the Disabler won't be able to decrypt the data and, that will cause a stuck at the boot logo!
4.2 Reboot Recovery
5. In TWRP perform a normal factory reset
6. Flash Disable_Dm-Verity_ForceEncrypt. (Cache wipe is optional).
7. Flash your GSI image.
8. Format Data (Skip this step if you already did this in 4.1)!
9. Reboot Recovery (Skip this step, too if you already did this in 4.2)!
10. Flash Magisk-phh
(11. Wipe cache/dalvik).
12. Reboot System
13. Enjoy!
*** Possible GSI bugs ***
Please note, that bugs can differ/vary on different GSIs, the numbers are not fully accurate!
1. The default camera app will work, however it doesn't support HDR, panorama or portrait modes. It also can't record in 4K resolution. Freezing is also possible. ~ 50%
2. First time, when you open the camera it'll stuck on loading, but after you go back and open it again it will work flawlessly. ~ 50%
3. No audio/microphone during phone calls. ~ 15%
*** Guaranteed GSI bugs*** 1. The infrared face unlocking will not work, only fingerprint authentication is working. ~ 100%
2. You won't be able to charge your device while it's turned off, after you plug it in, it will automatically boot up. ~ 100%
3. Auto brightness. ~ 100% (There is a fix for auto brightness below)!
*** Camera fix (GSI) ***
(If you get ,,serious camera error" or your camera freezes on HDR)
1. Download a custom camera app, where you can manually adjust the ISO level.
2. With OpenCamera, for example you have to adjust ISO to 800 and never above, because your camera will freeze!
3. So, always keep ISO 800 or under. With these settings even HDR shots are working!
*** Auto brightness (GSI) ***1. Download framework-res__auto_generated_rro.apk from this thread.
2. Follow the instructions, which are described in this post. (You will need to have root to use ,,su" commands).
3. Thank you MishaalRahman and kAs1m for the apk and the instructions!
Twrp disappears when restarting
Help, twrp disappears when restarting. After installing it by: "fastboot flash recovery trwp.img". right there I start it with the "Vol + Power" keys and it starts correctly but when you turn it off and back in, "stock recovery" appears again. I also installed it again using the same twrp, but it disappears again.
kcire_eae said:
Help, twrp disappears when restarting. After installing it by: "fastboot flash recovery trwp.img". right there I start it with the "Vol + Power" keys and it starts correctly but when you turn it off and back in, "stock recovery" appears again. I also installed it again using the same twrp, but it disappears again.
Click to expand...
Click to collapse
Hello, please don't reboot after sending the recovery image to the phone. Execute the:" fastboot reboot recovery " command. Now it is going to work.
Halwer said:
Hello, please don't reboot after sending the recovery image to the phone. Execute the:" fastboot reboot recovery " command. Now it is going to work.
Click to expand...
Click to collapse
It didn't work, given: "fastboot: usage: unknown reboot target recovery" Sorry for the long time to answer, I only have mobile data, and from this same mobile I answer, and I use google translator, I'm from Mexico.
Halwer said:
Hello, please don't reboot after sending the recovery image to the phone. Execute the:" fastboot reboot recovery " command. Now it is going to work.
Click to expand...
Click to collapse
Foto
kcire_eae said:
Foto
Click to expand...
Click to collapse
Well, it looks good. Maybe only " reboot recovery " is enough.
Halwer said:
Well, it looks good. Maybe only " reboot recovery " is enough.
Click to expand...
Click to collapse
It didn't work, friend, but I appreciate the help.
kcire_eae said:
It didn't work, friend, but I appreciate the help.
Click to expand...
Click to collapse
I'm sorry. Do an internet search and check related TWRP forums for solutions for this specific issue. For me everything is working fine. Are you sure you unlocked your bootloader first?
Halwer said:
I'm sorry. Do an internet search and check related TWRP forums for solutions for this specific issue. For me everything is working fine. Are you sure you unlocked your bootloader first?
Click to expand...
Click to collapse
Help, I did the following and I no longer start my mobile:
-fasboot flash recovery twrp.img.
-fasboot flash boot twrp.img.
-fasboot reboot.
now just start twrp even if restart restart twrp again, in the twrp browser my sdcard files are shown, maybe you can still help me please.
kcire_eae said:
Help, I did the following and I no longer start my mobile:
-fasboot flash recovery twrp.img.
-fasboot flash boot twrp.img.
-fasboot reboot.
now just start twrp even if restart restart twrp again, in the twrp browser my sdcard files are shown, maybe you can still help me please.
Click to expand...
Click to collapse
You should not have flash the recovery image to the boot partition. These partitions are not the same, be careful! Now you can save your data from TWRP via MTP connection to your computer. After that restore your phone with QPST to the latest pie ROM or to the oreo ROM from yandex. The oreo ROM is flashable from recovery, it is easier.
Halwer said:
You should not have flash the recovery image to the boot partition. These partitions are not the same, be careful! Now you can save your data from TWRP via MTP connection to your computer. After that restore your phone with QPST to the latest pie ROM or to the oreo ROM from yandex. The oreo ROM is flashable from recovery, it is easier.
Click to expand...
Click to collapse
Is it possible to just flash the boot partition (boot) again, if I get the boot.img from another rom?
I don't want to lose the stock rom:crying:
kcire_eae said:
Is it possible to just flash the boot partition (boot) again, if I get the boot.img from another rom?
I don't want to lose the stock rom:crying:
Click to expand...
Click to collapse
Maybe you can try to download a ROM file, extract it and flash the boot image, but I'm not sure if it is going to work.
Halwer said:
Maybe you can try to download a ROM file, extract it and flash the boot image, but I'm not sure if it is going to work.
Click to expand...
Click to collapse
I'm going to try, and even,
on this page there are android 9, will it be true?
"https: // mirrors.lolinet.com/ firmware / lenovo /l58041/"
but first I will do it with the "O" stock, which you mention here.
I hope it will work again.
kcire_eae said:
I'm going to try, and even,
on this page there are android 9, will it be true?
"https: // mirrors.lolinet.com/ firmware / lenovo /l58041/"
but first I will do it with the "O" stock, which you mention here.
I hope it will work again.
Click to expand...
Click to collapse
You should do the oreo version, if your were on the global oreo ROM. After that you can try the pie version, if nothing works don't worry you can do a backup of your data from twrp to your computer and flash a custom ROM or the chinese Pie version, which is recommended. With root access you can easily debloat the chinese ROM and with AdAway you can disable all communications pointing to chinese servers or websites. I also found these. Maybe you can give them a try.
After a few hours I was finally able to install the "Chinese stock rom", although I struggled, since the files of the "rom" of the l58041 do not quite coincide with the "stupdroid" tutorial and some files have two different versions, something like that:
here I chose the "ddr" .
prog_emmc_firehose_xxxx_ddr.mbn (.elf). prog_emmc_firehose_xxxx.lite.mbn (.elf).
here I chose the "retain_userdata".
rawprogram0.xml. rawprogram0_retain_userdata.xml.
and in qfil "Flat Build", however I don't know if it was the right thing because at the beginning I was asked for a password ("but that's another topic").
To add a language (without root), use local more apk.
"https: // c. mi. com / thread-2098669-1-0.html"
To root the "radiationofthenation" thread worked me.
"https:. //forum .xda-developers . com/general/help/lenovo-s5-pro-root-global-firmware-help-t3895643/page2"
kcire_eae said:
After a few hours I was finally able to install the "Chinese stock rom", although I struggled, since the files of the "rom" of the l58041 do not quite coincide with the "stupdroid" tutorial and some files have two different versions, something like that:
here I chose the "ddr" prog_emmc_firehose_xxxx_ddr.mbn (.elf). prog_emmc_firehose_xxxx.lite.mbn (.elf).
here I chose the "retain_userdata" rawprogram0.xml. rawprogram0_retain_userdata.xml.
and in qfil "Flat Build", however I don't know if it was the right thing because at the beginning I was asked for a password ("but that's another topic").
To add a language (without root), use local more apk.
"https: // c. mi. com / thread-2098669-1-0.html"
To root the "radiationofthenation" thread worked me.
"https:. //forum .xda-developers . com/general/help/lenovo-s5-pro-root-global-firmware-help-t3895643/page2"
Click to expand...
Click to collapse
I'm glad it is working for you now. Yes, you are right the tutorials flap at some points, but there are other tutorials which you can follow and make it work. For the first time I was struggling with the restoration, too. You will see, that the chinese ROM is quite good, you just have to uninstall the bloatware and disable spying DNS requests.
Halwer said:
I'm glad it is working for you now. Yes, you are right the tutorials flap at some points, but there are other tutorials which you can follow and make it work. For the first time I was struggling with the restoration, too. You will see, that the chinese ROM is quite good, you just have to uninstall the bloatware and disable spying DNS requests.
Click to expand...
Click to collapse
Ohh, explain more about spying. And also if you know something about the message that Android told me when I start. I remember that I flashed twrp.img using "fastboot", and when I asked for a password to decrypt, it only allowed me to clear cache and dalvit cache (I did wipe), and when I started again I showed a message saying that I was encrypting and a percentage, just here, I interrupted the process by turning off the cell phone, and flashed again with qfil (download). So when I start I just remember that I said something about the cell phone being restored and then I could restore the copy with my Google account. So what I think is that when the message of "TO START ANDROID ENTER YOUR PASSWORD" is displayed, it may work to interrupt or perhaps to put the incorrect password many times to automatically reset or also choose "rawprogram0.xml" in qfil (but I did not dare because it deletes it the information related to the imeil and the signal or at least that says some comments ). Now there is only one who can interpret what happened and to have clearer the restoration process, the rom seems to me very much the problem of the language is solved with "more local", I am from Mexico (At & t).
good morning i have good new
i have been backing up the global rom
just wants to go a long time it is super compressed 3.5giga and it is regular size 10.6 g
nikosddesign said:
good morning i have good new
i have been backing up the global rom
just wants to go a long time it is super compressed 3.5giga and it is regular size 10.6 g
Click to expand...
Click to collapse
Thank you, I'm sure some people will find it very useful!
Hello
it's about 4gigabyte have to be patient.
i have very bad internet connection...