Database Info

【Reproduced】XZ2/XZ2P/XZ2C/XZ3 TWRP for Android 10

Reprinted to China xpeira Forum: GFan Author: machao44.Just reproduced, irresponsible
Original Link：
http://bbs.gfan.com/android-9634387-1-1.html
http://bbs.gfan.com/android-9634397-1-1.html
http://bbs.gfan.com/android-9634405-1-1.html
Bugs:Unable to read external SD card
Flash steps:
1.Flash firmware, do not start the device
2.Open the adb folder
xz2:
fastboot flash boot twrp-xz2.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Click to expand...
Click to collapse
xz2p:
fastboot flash boot twrp-xz2p.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Click to expand...
Click to collapse
xz2c:
fastboot flash boot twrp-xz2c.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Click to expand...
Click to collapse
xz3:
fastboot flash boot twrp-xz3.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Click to expand...
Click to collapse
3.Press and hold the volume down and power buttons to enter twrp, connect to the phone and enable MTP mode.
4.Drag boot_X-FLASH-ALL-B6B5.sin in the firmware to UnSIN.exe to decrypt it, and then rename it to kernel.img.
5.Put kernel.img in the startup folder, and then compress it to boot.zip (please note that the correct method is to select the META-INF folder and kernel.img for compression)
6.Copy boot.zip, twrp-installer-xz3-3.3.x.zip, Magisk-v20.3.zip, fstab.zip to the phone storage, and then refresh. (Xz3 only needs to copy boot.zip, twrp-installer-xz3-3.3.x.zip, Magisk-v20.3.zip)
7.Carry out

Download Link:https://drive.google.com/drive/folders/1e2sWOLhhiYmDyd-aN7sx1iLplPtIAVNf

It does not work for me, the first time I get to the home screen, after 5 minutes it restarted and it does not happen from the Xperia animation, I used XZ2 Android 10. Your input is greatly appreciated

anjelz2012 said:
It does not work for me, the first time I get to the home screen, after 5 minutes it restarted and it does not happen from the Xperia animation, I used XZ2 Android 10. Your input is greatly appreciated
Click to expand...
Click to collapse
Maybe you should try again. Step 6 is that I did n’t write clearly. The correct flashing steps are: Flashing in order
1. Flashing boot.zip 2. Flashing twrp-installer-xz3-3.3.x.zip 3. Flashing Magisk-v20.3.zip 4. Flashing fstab.zip
---------- Post added at 12:03 ---------- Previous post was at 11:56 ----------
L1e" said:
Reprinted to China xpeira Forum: GFan Author: machao44.Just reproduced, irresponsible
Original Link：
http://bbs.gfan.com/android-9634387-1-1.html
http://bbs.gfan.com/android-9634397-1-1.html
http://bbs.gfan.com/android-9634405-1-1.html
Bugs:Unable to read external SD card
Flash steps:
1.Flash firmware, do not start the device
2.Open the adb folder
xz2:
xz2p:
xz2c:
xz3:
3.Press and hold the volume down and power buttons to enter twrp, connect to the phone and enable MTP mode.
4.Drag boot_X-FLASH-ALL-B6B5.sin in the firmware to UnSIN.exe to decrypt it, and then rename it to kernel.img.
5.Put kernel.img in the startup folder, and then compress it to boot.zip (please note that the correct method is to select the META-INF folder and kernel.img for compression)
6.Copy boot.zip, twrp-installer-xz3-3.3.x.zip, Magisk-v20.3.zip, fstab.zip to the phone storage, and then refresh. (Xz3 only needs to copy boot.zip, twrp-installer-xz3-3.3.x.zip, Magisk-v20.3.zip)
7.Carry out
Click to expand...
Click to collapse
The correct way to step 6 is to refresh boot.zip, twrp-installer-xz3-3.3.x.zip, Magisk-v20.3.zip, fstab.zip in turn

I followed him in that order and he always got the same result

anjelz2012 said:
I followed him in that order and he always got the same result
Click to expand...
Click to collapse
Have you tried flash the firmware？Because after flashing the firmware according to the original text, do not start the phone

L1e" said:
Have you tried flash the firmware？Because after flashing the firmware according to the original text, do not start the phone
Click to expand...
Click to collapse
The process I have followed is as follows:
1.- Flash firmware 52.1.A.0.532 (android 10) and I don't start it
2.- I connect in fastboot mode to the pc and execute:
fastboot flash boot twrp-xz2.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
3.- I enter Twrp mode
4.- Prepare the boot.zip file (META-INF + kernel.img using 7zip)
5.- Copy: boot.zip, twrp-installer-xz3-3.3.x.zip, Magisk-v20.3.zip, fstab.zip in the phone storage
6.- Flashing in the following order:
*boot.zip
twrp-installer-xz3-3.3.x.zip
Magisk-V20
fstab.zip
7.- I restart my mobile and it doesn't work for me.
When it shows the lock screen after rebooting, it turns off and does not pass the Xperia animation
:cyclops::cyclops:

anjelz2012 said:
The process I have followed is as follows:
1.- Flash firmware 52.1.A.0.532 (android 10) and I don't start it
2.- I connect in fastboot mode to the pc and execute:
fastboot flash boot twrp-xz2.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
3.- I enter Twrp mode
4.- Prepare the boot.zip file (META-INF + kernel.img using 7zip)
5.- Copy: boot.zip, twrp-installer-xz3-3.3.x.zip, Magisk-v20.3.zip, fstab.zip in the phone storage
6.- Flashing in the following order:
*boot.zip
twrp-installer-xz3-3.3.x.zip
Magisk-V20
fstab.zip
7.- I restart my mobile and it doesn't work for me.
When it shows the lock screen after rebooting, it turns off and does not pass the Xperia animation
:cyclops::cyclops:
Click to expand...
Click to collapse
Sorry, it took a long time to reply to you. Through trial and error, I found no problems. I don't know what went wrong.

anjelz2012 said:
The process I have followed is as follows:
1.- Flash firmware 52.1.A.0.532 (android 10) and I don't start it
2.- I connect in fastboot mode to the pc and execute:
fastboot flash boot twrp-xz2.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
3.- I enter Twrp mode
4.- Prepare the boot.zip file (META-INF + kernel.img using 7zip)
5.- Copy: boot.zip, twrp-installer-xz3-3.3.x.zip, Magisk-v20.3.zip, fstab.zip in the phone storage
6.- Flashing in the following order:
*boot.zip
twrp-installer-xz3-3.3.x.zip
Magisk-V20
fstab.zip
7.- I restart my mobile and it doesn't work for me.
When it shows the lock screen after rebooting, it turns off and does not pass the Xperia animation
:cyclops::cyclops:
Click to expand...
Click to collapse
I think maybe your step 4 was wrong,
put Kernel.img into boot folder,then compression the folder,you will get boot.zip ,flash it.

Did anyone try this? Got success?
Tia

serajr said:
Did anyone try this? Got success?
Tia
Click to expand...
Click to collapse
I tried again and yes, this time it worked! Although it is somewhat unstable, because it causes forced reboots and forced encryption does not work!

anjelz2012 said:
I tried again and yes, this time it worked! Although it is somewhat unstable, because it causes forced reboots and forced encryption does not work!
Click to expand...
Click to collapse
Thanks bro! I didn't even get the 3rd step to work (entering twrp with combo keys after flashing it).
I'll try it once again tomorrow, after a fresh firmware installation! Maybe that's why things didn't work here.

I've just installed it with latest firmware, it works great
An advice, keep TWRP in chinese or it doesn't flash anything and get stucked

I was stuck on booting the first TWRP in the adb folder, with the screen screaming with a notification of a corrupt device & it will reboot.
I am thus assuming this TWRP pack is for the stock rom, not a custom one.

Works almost perfectly, thanks for sharing
---------- Post added at 12:05 AM ---------- Previous post was at 12:04 AM ----------
adwinp said:
I was stuck on booting the first TWRP in the adb folder, with the screen screaming with a notification of a corrupt device & it will reboot.
I am thus assuming this TWRP pack is for the stock rom, not a custom one.
Click to expand...
Click to collapse
Step One: Flash Firmware....

Beetle84 said:
Works almost perfectly, thanks for sharing
Step One: Flash Firmware....
Click to expand...
Click to collapse
I read that - it should probably be specified that only stock firmware is supported (in contrast to custom).

adwinp said:
I read that - it should probably be specified that only stock firmware is supported (in contrast to custom).
Click to expand...
Click to collapse
Generally, when someone says firmware, they mean stock. Custom roms are usually not called firmware

adwinp said:
I was stuck on booting the first TWRP in the adb folder, with the screen screaming with a notification of a corrupt device & it will reboot.
I am thus assuming this TWRP pack is for the stock rom, not a custom one.
Click to expand...
Click to collapse
I made progress
My twrp build for custom 10.0 works now.
Decryption is left in my to-do list, before I move to adapt changes for a stock twrp.

MartinX3 said:
[...] before I move to adapt changes for a stock twrp.
Click to expand...
Click to collapse
Just another amazing news from you... THANK YOU SO MUCH! Looking forward to it!!
The one provided from OP does work, I gotta say, but it makes use of unencrypted /data partition hack (fstab.zip), which is not - imho - a good choice.

serajr said:
Just another amazing news from you... THANK YOU SO MUCH! Looking forward to it!!
The one provided from OP does work, I gotta say, but it makes use of unencrypted /data partition hack (fstab.zip), which is not - imho - a good choice.
Click to expand...
Click to collapse
Thank you
Yeah, this TWRP is the same chinese TWRP like for stock 9.0 in the past

[VBMETA][IMG][PATCHED] VBMETA Image Partition: Disabled verity & Disabled verification for MERLIN (Xiaomi Redmi 10X 4G / Xiaomi Redmi Note 9)

PATCHED VBMETA.IMG for MERLIN by VD171
For what do I need it ?
If you try to flash any custom partition, your device can bricks or gets in bootloop. This patch with disabled verity and disabled verification avoid it and need to be flashed once only. Once flashed, you don't need to flash vbmeta again.
Works with:
- Xiaomi Redmi 10X 4G
- Xiaomi Redmi Note 9
Firmware Versions:
- (Engineering) AL2522-Merlin-V039-Q-0513
- (Engineering) AL2522-Merlin-V044-Q-0920
- V12.5.1.0.RJOMIXM
- V12.0.1.0.RJOMIXM
- V12.0.8.0.QJOMIXM
- V12.0.7.0.QJOMIXM
- V12.0.6.0.QJOMIXM
- V12.0.5.0.QJOMIXM
- V12.0.4.0.QJOMIXM
- V12.0.3.0.QJOMIXM
- V11.0.5.0.QJOMIXM
- V11.0.4.0.QJOMIXM
How to flash it?
Code:
fastboot flash vbmeta vbmeta_vd171.img
MD5 hashes:
AL2522-Merlin-V039-Q-0513: ca9ccb577b5a1efd348949f9ed99409f
AL2522-Merlin-V044-Q-0920: dccbc87dbedc7f758120feac72e6c6cf
V12.5.1.0.RJOMIXM: 9d052f5fd4a7df3b5ad39c07b9330d75
V12.0.1.0.RJOMIXM: 9d052f5fd4a7df3b5ad39c07b9330d75
V12.0.8.0.QJOMIXM: 4a59b0481aa2a3bd5381fd51d2da3184
V12.0.7.0.QJOMIXM: 64fa528e39ebcd4838b92d5b120b0035
V12.0.6.0.QJOMIXM: 974e9c3462b4346a70ff370f6c28527b
V12.0.5.0.QJOMIXM: 7c68fe2373188e20abd4f1c68cb949b1
V12.0.4.0.QJOMIXM: 39ef5250fd562e20b6530cf8a0a96943
V12.0.3.0.QJOMIXM: 13c896c8dc4924bed5b63673a0a38a1a
V11.0.5.0.QJOMIXM: 2323b64102370a98f1641bc4d8227c52
V11.0.4.0.QJOMIXM: 666c0fbbd4d329001290277fcfd052d8
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/

Hi Broather , help me patched boot + vbmeta for this rom . I want to root it but after flash patched boot and disable vbmeta my devices hang on logo
https://bigota.d.miui.com/V12.5.3.0...JCNXM_20210429.0000.00_11.0_cn_1084bb7a7f.tgz
- Boot : https://drive.google.com/file/d/12Ne1FYZL_Mn9K2KP-VwHqO3Z3ACLti62/view?usp=sharing
- Vbmeta : https://drive.google.com/file/d/1LX7fbupDePK4aRY2CYZyRNmS4uf_BOZe/view?usp=sharing
thank so much
@VD171

empty.cad said:
Hi Broather , help me patched boot + vbmeta for this rom . I want to root it but after flash patched boot and disable vbmeta my devices hang on logo
https://bigota.d.miui.com/V12.5.3.0...JCNXM_20210429.0000.00_11.0_cn_1084bb7a7f.tgz
- Boot : https://drive.google.com/file/d/12Ne1FYZL_Mn9K2KP-VwHqO3Z3ACLti62/view?usp=sharing
- Vbmeta : https://drive.google.com/file/d/1LX7fbupDePK4aRY2CYZyRNmS4uf_BOZe/view?usp=sharing
thank so much
@VD171
Click to expand...
Click to collapse
You can patch BOOT + VBMETA using the magisk app !
Yes, magisk app will patch VBMETA too !
Just follow this:
1. Download the full stock rom.
2. Extract these two files: boot.img and vbmeta.img.
3. COMPRESS those two files to TAR. (Attention: TAR and NOT tgz. You can use 7-Zip: https://7-zip.org )
4. Open the magisk app and click on "install to file".
5. Select the COMPRESSED TAR file and wait until it finish.
6. Open the folder "Downloads" and uncompress the file magisk_patched.tar to get the patched boot.img and the patched vbmeta.img.
7. Flash the patched boot.img and the patched vbmeta.img. (You need to flash patched vbmeta because vbmeta verifies if any partition was changed.)
Done, you got patched boot.img and patched vbmeta.img files.
Warning: magisk app will ignore if you try to patch ONLY the vbmeta.img, you need to patch vbmeta.img together boot.img compressed in only one file.

VD171 said:
You can patch BOOT + VBMETA using the magisk app !
Yes, magisk app will patch VBMETA too !
Just follow this:
1. Download the full stock rom.
2. Extract these two files: boot.img and vbmeta.img.
3. COMPRESS those two files to TAR. ( You can use 7-Zip: https://7-zip.org )
4. Open the magisk app and click on "install to file".
5. Select the COMPRESSED TAR file.
6. Open the folder "Downloads" and extract the magisk_patched.TAR to get the patched boot.img and the patched vbmeta.img.
7. Flash the patched boot.img and the patched vbmeta.img.
Done.
Warning: magisk app will ignore if you try to patch ONLY the vbmeta.img, you need to patch vbmeta.img together boot.img compressed in only one file.
Click to expand...
Click to collapse
Thank broather

VD171 said:
You can patch BOOT + VBMETA using the magisk app !
Yes, magisk app will patch VBMETA too !
Just follow this:
1. Download the full stock rom.
2. Extract these two files: boot.img and vbmeta.img.
3. COMPRESS those two files to TAR. ( You can use 7-Zip: https://7-zip.org )
4. Open the magisk app and click on "install to file".
5. Select the COMPRESSED TAR file.
6. Open the folder "Downloads" and extract the magisk_patched.TAR to get the patched boot.img and the patched vbmeta.img.
7. Flash the patched boot.img and the patched vbmeta.img.
Done.
Warning: magisk app will ignore if you try to patch ONLY the vbmeta.img, you need to patch vbmeta.img together boot.img compressed in only one file.
Click to expand...
Click to collapse
Thank broather , but my devices still hang on logo after flash patched boot and patched vbmeta . Too dificult to root it

empty.cad said:
Thank broather , but my devices still hang on logo after flash patched boot and patched vbmeta . Too dificult to root it
Click to expand...
Click to collapse
Did you unlock the bootloader?
The patched boot and patched vbmeta are enough to root it, but it requires unlocked bootloader.

Hey bro, can you help me root this device. My device is unlocked but none of the fastboot commands work , it just freezes and doesnt move ahead at all.

bismeet said:
Hey bro, can you help me root this device. My device is unlocked but none of the fastboot commands work , it just freezes and doesnt move ahead at all.
Click to expand...
Click to collapse
Try to flash the whole MIUI again and try to root again following properly the steps.

VD171 said:
Try to flash the whole MIUI again and try to root again following properly the steps.
Click to expand...
Click to collapse
Well, i havent changed anything really except the bootloader unlock so I dont understand why that should be the case.

bismeet said:
Well, i havent changed anything really except the bootloader unlock so I dont understand why that should be the case.
Click to expand...
Click to collapse
Did you mean the device froze at fastboot or boot?
Did you try USB 2.0 or USB 3.0 ?
Did you try other usb ports and other usb cables?

VD171 said:
Did you mean the device froze at fastboot or boot?
Did you try USB 2.0 or USB 3.0 ?
Did you try other usb ports and other usb cables?
Click to expand...
Click to collapse
The device isnt frozen. The commands freeze and dont do anything. fastboot devices works but other commands do not do anything. Yes, I tried both 2.0 and 3.0.

bismeet said:
The device isnt frozen. The commands freeze and dont do anything. fastboot devices works but other commands do not do anything. Yes, I tried both 2.0 and 3.0.
Click to expand...
Click to collapse
I know. You need keep trying other usb ports and usb cables.

VD171 said:
I know. You need keep trying other usb ports and usb cables.
Click to expand...
Click to collapse
Tried all. Guess I need to add new ports to my phones and laptops.

bismeet said:
Tried all. Guess I need to add new ports to my phones and laptops.
Click to expand...
Click to collapse
If you can, try in another computer too.
I had same problem with USB 2.0 and everything is fine now with USB 3.0.

VD171 said:
If you can, try in another computer too.
I had same problem with USB 2.0 and everything is fine now with USB 3.0.
Click to expand...
Click to collapse
Okay.
I guess this phone is not rootable.
Never buying mtk device again.

bismeet said:
Okay.
I guess this phone is not rootable.
Never buying mtk device again.
Click to expand...
Click to collapse
What is your device?

VD171 said:
What is your device?
Click to expand...
Click to collapse
Redmi note 9 mtk version from India/

bismeet said:
Redmi note 9 mtk version from India/
Click to expand...
Click to collapse
Everyone has already rooted it.

VD171 said:
You can patch BOOT + VBMETA using the magisk app !
Yes, magisk app will patch VBMETA too !
Just follow this:
1. Download the full stock rom.
2. Extract these two files: boot.img and vbmeta.img.
3. COMPRESS those two files to TAR. ( You can use 7-Zip: https://7-zip.org )
4. Open the magisk app and click on "install to file".
5. Select the COMPRESSED TAR file.
6. Open the folder "Downloads" and extract the magisk_patched.TAR to get the patched boot.img and the patched vbmeta.img.
7. Flash the patched boot.img and the patched vbmeta.img.
Done.
Warning: magisk app will ignore if you try to patch ONLY the vbmeta.img, you need to patch vbmeta.img together boot.img compressed in only one file.
Click to expand...
Click to collapse
Thank you so much for this guide bro!
I tried the same on my OPPO, but with Bootloader locked and flashed through SP Flash Tool. My phone detects a patched vbmeta (coz I tested flashing the patched vbmeta alone.)

llxxVENOMxxll said:
Thank you so much for this guide bro!
I tried the same on my OPPO, but with Bootloader locked and flashed through SP Flash Tool. My phone detects a patched vbmeta (coz I tested flashing the patched vbmeta alone.)
Click to expand...
Click to collapse
Yes, you can't flash patched vbmeta while bootloader is locked.
You need to unlock bootloader first if you want to apply any change to any partition.

Extract recovery from boot.img

If I run
Code:
fastboot boot twrp.img
Spoiler
TWRP
my 7Pro boots into TWRP
But if I run
Code:
fastboot boot lineagerecovery.img
Spoiler
Lineage Recovery
it boots the ROM; I think because this image file include a Kernel but the TWRP img file not.
I would like to get the same behavior of TWRP img file with Lineage Recovery img file.
So, presuming I'm right, there is any way to make a recovery.img file, extracting it from a boot.img file?

Question How to root derkpest os in op9?

Bro can I root op9 running derkpest rom it is safe to root and if safe then how to root tell the possible best way guys?

Patched boot.img with magisk, PS when you find derkpest Rom for op9?

iaio72 said:
Patched boot.img with magisk, PS when you find derkpest Rom for op9?
Click to expand...
Click to collapse
Hoo bro from a12 patched img doesn't work I've saw posts so does it work or flashing magisk zip in recovery which is best way to avoid bootloop

Venkata Prathap said:
Hoo bro from a12 patched img doesn't work I've saw posts so does it work or flashing magisk zip in recovery which is best way to avoid bootloop
Click to expand...
Click to collapse
For OOS:
1) Have Magisk Manager v23016 or above installed
2) Download the boot.img from here and put in phone’s Download folder
3) Open Magisk Manager and click top Install and patch boot.img
4) Move patched image to PC’s adb directory
5) Boot phone into fastboot mode and run the command:
fastboot boot magisk_patched_boot.img
6) Phone will boot into temporary root. Click top Install again but choose Direct Install (recommended) this time
7) Reboot when done and profit
For COS:
1) Have Magisk Manager v23016 or above installed
2) Download rooting files and extract on PC
3) Copy boot.img and vendor_boot.img to phone’s Download folder
4) Open Magisk Manager and click top Install and patch boot.img. When done, go back and repeat the process for vendor_boot.img
5) Move both patched images to adb directory on your pc along with vbmeta.img
6) Run this command:
fastboot –-disable-verity —disable-verification flash vbmeta vbmeta.img
********************Make sure it completes without errors before proceeding. If errors, update your ADB: https://developer.android.com/studio/releases/platform–tools
7) If no errors, run these commands:
fastboot flash vendor_boot vendor_boot_magisk.img
fastboot flash boot boot_magisk.img
8) If no errors, run
fastboot reboot

incesu said:
For OOS:
1) Have Magisk Manager v23016 or above installed
2) Download the boot.img from here and put in phone’s Download folder
3) Open Magisk Manager and click top Install and patch boot.img
4) Move patched image to PC’s adb directory
5) Boot phone into fastboot mode and run the command:
fastboot boot magisk_patched_boot.img
6) Phone will boot into temporary root. Click top Install again but choose Direct Install (recommended) this time
7) Reboot when done and profit
For COS:
1) Have Magisk Manager v23016 or above installed
2) Download rooting files and extract on PC
3) Copy boot.img and vendor_boot.img to phone’s Download folder
4) Open Magisk Manager and click top Install and patch boot.img. When done, go back and repeat the process for vendor_boot.img
5) Move both patched images to adb directory on your pc along with vbmeta.img
6) Run this command:
fastboot –-disable-verity —disable-verification flash vbmeta vbmeta.img
********************Make sure it completes without errors before proceeding. If errors, update your ADB: https://developer.android.com/studio/releases/platform–tools
7) If no errors, run these commands:
fastboot flash vendor_boot vendor_boot_magisk.img
fastboot flash boot boot_magisk.img
8) If no errors, run
fastboot reboot
Click to expand...
Click to collapse
for COS: you still only need boot.img and magisk. install magisk patch boot.img temporarily boot on magisk-patchedboot.img and direct install in magisk manager

Question can't install magisk

after the latest apdate 13.0.3 i lose my magisk
and when i want to install it using adb it gives me a boot loop and i shoold to flash the original boot.img
Nb : ramdisk yes

Uninstall it thn flash it using Twrp

twrp can't read internal storage
but when i use the memory card then i click install the recovery restart directly
also by using adb the installation fail in 3%

souhail39 said:
twrp can't read internal storage
but when i use the memory card then i click install the recovery restart directly
also by using adb the installation fail in 3%
Click to expand...
Click to collapse
First flash the original boot image into your phone and make sure your phone can boot after you flash the original boot image.
fastboot flash Magisk-patched-boot.img
Patched boot image can be made on another phone.
https://forum.xda-developers.com/t/4288121/post-85137963

pl1992aw said:
First flash the original boot image into your phone and make sure your phone can boot after you flash the original boot image.
fastboot flash Magisk-patched-boot.img
Patched boot image can be made on another phone.
https://forum.xda-developers.com/t/4288121/post-85137963
Click to expand...
Click to collapse
This is what i did
The original boot run finely but the patched one give me a boot loop

Miui 13 doesn't support yet unless you patch the boot img. Just revert to 12.5.9

souhail39 said:
This is what i did
The original boot run finely but the patched one give me a boot loop
Click to expand...
Click to collapse
The safe way is to not flash boot image with TWRP or Orangefox custom recoveries. Flash with fastboot mode with PC is better to prevent issue.
What version of Magisk?
If you are using the latest Magisk v24.X but it bootloop, you may report issue to Magisk author in his github.
If you used Magisk v23, it is said not working on Android 12, so will not work on MIUI 13.

1. Download stock MIUI rom.
2. Extract two files: boot.img and vbmeta.img.
3. Compress the two files to a TAR file, like: boot_and_vbmeta.tar
4. Copy the TAR file to the device.
5. Open magisk app.
6. Choose "Install magisk to file" and select the TAR file. It will create the file magisk_patched.tar
7. Copy the magisk_patched.tar file to the PC.
8. Extract magisk_patched.tar to get boot_patched.img and vbmeta_patched.img
9. Enter in fastboot in device.
10. Flash boot_patched.img and vbmeta_patched.img to the device:
Code:
fastboot flash boot boot_patched.img
fastboot flash vbmeta vbmeta_patched.img

VD171 said:
1. Download stock MIUI rom.
2. Extract two files: boot.img and vbmeta.img.
3. Compress the two files to a TAR file, like: boot_and_vbmeta.tar
4. Copy the TAR file to the device.
5. Open magisk app.
6. Choose "Install magisk to file" and select the TAR file. It will create the file magisk_patched.tar
7. Copy the magisk_patched.tar file to the PC.
8. Extract magisk_patched.tar to get boot_patched.img and vbmeta_patched.img
9. Enter in fastboot in device.
10. Flash boot_patched.img and vbmeta_patched.img to the device:
Code:
fastboot flash boot boot_patched.img
fastboot flash vbmeta vbmeta_patched.img
Click to expand...
Click to collapse
thx for your answer but always the same problem with patched img files