So,
Today I flashed the UK BTU firmware (G920FXXU3COI9). However, when I extracted the file it had 4 files for AP, BL, CP AND CSC so I used them all. However, now I can't go back to my previous firmware (G920FXXU2COH5) because when I try flashing it with Odin it says on the phone: sw rev check fail.
I want to go back to this firmware because I have a Nandroid backup with all my stuff and it doesn't work when i try to restore it on the new firmware. Can you help me with the right file to flash? Do I need the CSC file of the old firmware as well? Can you help me please?
How to fix system rev. check fail device: 2 binary 1 error when flashing a custom 5.1.1 ROM
If this error has appeared after flashing the new Bootloader and Modem for BOFJ
Download this: https://mega.co.nz/#!E05hTYaS!_vad3fvvKCwWiMmgWGrGgc69KYdgYRa1wFCmxYzwH3s
(Stock 5.1.1)
Once installed and passed with ODIN (Flash as AP)
Power off the phone and boot into download mode
Once in download mode flash the latest TWRP 2.8.7.1
http://forum.xda-developers.com/showpost.php?p=61548356&postcount=570
After flashed you'll be able to boot into recovery and flash your custom ROM
This post was taken from this thread
$tefanDroid said:
How to fix system rev. check fail device: 2 binary 1 error when flashing a custom 5.1.1 ROM
If this error has appeared after flashing the new Bootloader and Modem for BOFJ
Download this: https://mega.co.nz/#!E05hTYaS!_vad3fvvKCwWiMmgWGrGgc69KYdgYRa1wFCmxYzwH3s
(Stock 5.1.1)
Once installed and passed with ODIN (Flash as AP)
Power off the phone and boot into download mode
Once in download mode flash the latest TWRP 2.8.7.1
http://forum.xda-developers.com/showpost.php?p=61548356&postcount=570
After flashed you'll be able to boot into recovery and flash your custom ROM
This post was taken from this thread
Click to expand...
Click to collapse
Yeah I saw that, but the Mega download link is invalid
Merry Xmas to all
I have an g920i not rooted , flashed a TTT firmware 5.1.1. (trinidad and tobago) and now the phone cant get 4G networks
all seem to look fine but there is no way to flash an previous 5.1.1. firmware (Mexico TCE) which has the 4G running smooth
Odin pops an NAND write fail error, and i cant get beyond that point
any ideas?
hello, i had flashed CM13 on my galaxy s5. i discovered that there was a moar rom for the s5 so i went ahead and flashed the rom. i aslo tried to flash the included bootloader but it failed and now when i restart my phone i get the firmware error. ive tried flashing the stock firmware through odin and no matter what i try to flash i always get the SW REV CHECK FAILED (aboot) fused 3 binary 1 error. im starting to freak out here. this is my only phone. idk if i was supposed to flash the bootloader file first or what. someone please help me!
Hello!! I have one galaxy s6 (sm-g920f) and i try to restore it back to stock but every time i am trying to flash it via odin i am getting this error:sw rev check fail device 4 binary 3.. i have tried with full rom( AP,BL,CP,CSC) with and without pit file and with the rom just with the ap and nothing..i have also tried to flash with kies and smart swich and i am getting the same error... i have done all the wipes from the recovery (twrp) and still nothing.. only if i try to flash a custom rom from twrp will boot...now i am downloading the firmware of my device according to my serial number to flash it.. i also tried the method to flash like if you get sboot.bin error..
Can anyone help me please??:fingers-crossed:
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) and it works!!!
now the problem is that the bootloader is another version from the rom, i cannot see any version of modem, the imei and the product code are blank... i checked them with the phone info app.. now i am downloading the rom with the baseband that shows me the phone info that i have... i also noticed that if i flash a rom which is one file or a rom that is full (bootloader,ap,modem,csc) i am getting error at cm.bin which is on bootloader.. that's why i can install a full rom but without the bootloader file...
Anyone????
i am always getting error at the cm.bin on odin...
i solved my problem by flashing the full stock rom according to the bootloader which was stucked in my phone
domigr said:
Hello!! I have one galaxy s6 (sm-g920f) and i try to restore it back to stock but every time i am trying to flash it via odin i am getting this error:sw rev check fail device 4 binary 3.. i have tried with full rom( AP,BL,CP,CSC) with and without pit file and with the rom just with the ap and nothing..i have also tried to flash with kies and smart swich and i am getting the same error... i have done all the wipes from the recovery (twrp) and still nothing.. only if i try to flash a custom rom from twrp will boot...now i am downloading the firmware of my device according to my serial number to flash it.. i also tried the method to flash like if you get sboot.bin error..
Can anyone help me please??:fingers-crossed:
Click to expand...
Click to collapse
Me too !! helppppppp:crying::crying:
It can be fix if i go to shop ??
TimeOFTimeless said:
Me too !! helppppppp:crying::crying:
It can be fix if i go to shop ??
Click to expand...
Click to collapse
I have the same problem
Everyone can help us ?
when i'm flash with odin "sw rev check fail device 4 binary 3" smart swich software also not supported my device. plzzz help me.......
my problme is solved
flash this without bootloader
G925FXXU3DPB_GG925FBTU3DPB1_BTU_FULL
:good::good::good::good::good::good::good::good::good::good::good:
"IMS SERVICE HAS STOPPED" And Base band and IMEI is unkown
domigr said:
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) and it works!!!
Click to expand...
Click to collapse
thank you for your advise. Now its working but my G920F still having two problem IMS SERVICE HAS STOPPED" And Base band and IMEI is unkown. plsss help meee
mustafa_thora said:
flash this without bootloader
G925FXXU3DPB_GG925FBTU3DPB1_BTU_FULL
:good::good::good::good::good::good::good::good::good::good::good:
Click to expand...
Click to collapse
I cannot boot into recover after this and it's stuck at the s6 logo
help
can someone help me i have galaxy s6 (sm-g920f) i want to back to stock and i just tried tried to install stock firmware 6.0.1 via odin with and without pit and i get this error sw rew check device 4 binary 3 but after i reboot it i have a message an error as occured while updating the device software can someone help me please
domigr said:
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) and it works!!!
Click to expand...
Click to collapse
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) but my phone still boot loop.
BL : -
ap : AP_G925FXXU3DPAD_CL7025264_QB8293502_REV02_user_low_ship.tar.md5
cp : CP_G925FXXU3DPAD_CL7025264_QB8293502_REV02_user_low_ship.tar.md5
csc : CSC_OXA_G925FOXA3DPAD_CL7025264_QB8293502_REV02_user_low_ship_.tar.md5
PIT: ZEROLTE_EUR_OPEN.pit
Any one can help ME
smartsecure said:
thank you for your advise. Now its working but my G920F still having two problem IMS SERVICE HAS STOPPED" And Base band and IMEI is unkown. plsss help meee
Click to expand...
Click to collapse
HOW DID YOU FLASH IT CAN YOU PLEASE ELABORATE. I have G920P running 6.0.1 and having the same issue while flashing 5.1.1
Cannot downgrade from 6.0.1 to 5.1.1.
SM-G920F, bought with Android 6.0.1. Phone Info says the phone is manufactured in 2016.11.15. Tried flashing same region Android 5.1.1 via Odin and got the "SW REV. CHECK FAIL. DEVICE: 4, BINARY: 3". Managed to reflash 6.0. Is it possible that the newest 6.0.1 (G920FXXS4DPJ2_G920FOXX4DPH1) won't let downgrade?
You can't downgrade the bootloader version. And since the bootloader it's changed at almost every update, you will only be able to install the latest software version for your country.
If all fails, try emergency software recovery from SmartSwitch
palogada said:
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) but my phone still boot loop.
BL : -
ap : AP_G925FXXU3DPAD_CL7025264_QB8293502_REV02_user_low_ship.tar.md5
cp : CP_G925FXXU3DPAD_CL7025264_QB8293502_REV02_user_low_ship.tar.md5
csc : CSC_OXA_G925FOXA3DPAD_CL7025264_QB8293502_REV02_user_low_ship_.tar.md5
PIT: ZEROLTE_EUR_OPEN.pit
Any one can help ME
Click to expand...
Click to collapse
Hi you listed a number of files there, where did you get them as they are not available on the search on these forums, I have the same problem and have managed to get this far from The Binary 1 error so making progress, I now just want to flash the lot so could do with some help on where the the files are.
I used the XEF OCT G920FXXS4DPJ2 Modem+Bootloader which i found on here which has given me a working ish Android phone, the touch screen is flipped on a vertical axis so I am looking to put something else over the top of everything to get it working properly again!
Thanks in advance for your help
cardigan101 said:
the touch screen is flipped on a vertical axis so I am looking to put something else over the top of everything to get it working properly again!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=60411933&postcount=5
check your odin mode bro
DroidTim said:
SM-G920F, bought with Android 6.0.1. Phone Info says the phone is manufactured in 2016.11.15. Tried flashing same region Android 5.1.1 via Odin and got the "SW REV. CHECK FAIL. DEVICE: 4, BINARY: 3". Managed to reflash 6.0. Is it possible that the newest 6.0.1 (G920FXXS4DPJ2_G920FOXX4DPH1) won't let downgrade?
Click to expand...
Click to collapse
i think your phone is p series and you flash wrong rom.pls check odin mode.almost of f series is modified.
Hey guys I need some help please. I am a bit of a noob and was trying to flash the PartCyborgRom using the BootLoopEdition firmware onto my originally G955U (which I had flashed with the G955U1 FW a while ago). And after I flashed the PartCyborgRom AP file through Odin, nothing happened as in the instructions, so I tried resetting the phone and continued to next step (not a good idea on my part) then I loaded the BL file and midway through that Odin gave me a "FAIL!" and the phone is stuck on Download Mode with the following error "SW REV CHECK FAIL : [system]Fused 2 > Binary 1".
I tried going back to stock and flashing all of the stock fw through Odin, but anytime I try to flash anything I get that same error. If I try to reboot the phone normally it tries to upgrade system but looks like nothing is on the phone anymore and is on bootloop. I am not sure what to do, did I **** up really bad and brick my phone?
I can't even get back into Recovery mode! It simply goes on a boot loop where it doesn't find anything in the system.
PS. when I tried to flash the PartCyborgRom my S8+ was on the latest G955U1 fw.
sebisuarez10 said:
Hey guys I need some help please. I am a bit of a noob and was trying to flash the PartCyborgRom using the BootLoopEdition firmware onto my originally G955U (which I had flashed with the G955U1 FW a while ago). And after I flashed the PartCyborgRom AP file through Odin, nothing happened as in the instructions, so I tried resetting the phone and continued to next step (not a good idea on my part) then I loaded the BL file and midway through that Odin gave me a "FAIL!" and the phone is stuck on Download Mode with the following error "SW REV CHECK FAIL : [system]Fused 2 > Binary 1".
I tried going back to stock and flashing all of the stock fw through Odin, but anytime I try to flash anything I get that same error. If I try to reboot the phone normally it tries to upgrade system but looks like nothing is on the phone anymore and is on bootloop. I am not sure what to do, did I **** up really bad and brick my phone?
I can't even get back into Recovery mode! It simply goes on a boot loop where it doesn't find anything in the system.
PS. when I tried to flash the PartCyborgRom my S8+ was on the latest G955U1 fw.
Click to expand...
Click to collapse
You are trying to flash old firmware. It sounds like you are already on firmware with the v2 bootloader and you're trying to flash firmware with rhe v1 bootloader. You need a stock firmware that has a 2 before the last four digits of the firmware name.
Firmware
It should be all well and good flashing stock firmware with the number 2, but I can't find any on XDA and any links outside either fail or try to make you pay because it's over 2GB... If anyone has a copy and space on their google drive, I'd be very grateful for a valid download link!
btuck812 said:
It should be all well and good flashing stock firmware with the number 2, but I can't find any on XDA and any links outside either fail or try to make you pay because it's over 2GB... If anyone has a copy and space on their google drive, I'd be very grateful for a valid download link!
Click to expand...
Click to collapse
Try sammobile.com.
Free download of the latest firmwares but might be a little slow.
Hey guys! I have a problem. I have flashed on my Galaxy S7 (Exynos version) the galaxy Note Fan Edition Port rom a couple of weeks ago, but now I flashed the latest stock firmware from Sammobile via odin and it always fails at the bootloader. I don't know why? I searched for many hours for a solution, but nothing works.... I hope somebody could help me
Here is the link for the note fan edition rom: https://forum.xda-developers.com/s7...-galaxy-note-fan-edition-port-vol1-0-t3633626
OEM unlock on?
Could also be that the latest bootloader prevents rolling back, so if you're trying to go from a newer bootloader to an older one it won't let you. You can probably just exclude the BL file and be fine.
Is that Fan Edition ROM you flashed not a S7 Edge rom made to work on the S7..! Maybe your phone shows up as a G935 now?
I have flashed android 8.0 manually from sammobile via odin and it got stuck on emergency recovery and I somehow got it into the download mode and every time I want to flash my stock firmware it says device 2 binary 1... I also flashed twrp recovery and wiped everything (system, data....) and tried again and it always fails in odin and says device 2 binary 1.. Im trying to find solution but everytime it fails. PLEASE HELP ME
daymonfeyenord said:
I have flashed android 8.0 manually from sammobile via odin and it got stuck on emergency recovery and I somehow got it into the download mode and every time I want to flash my stock firmware it says device 2 binary 1... I also flashed twrp recovery and wiped everything (system, data....) and tried again and it always fails in odin and says device 2 binary 1.. Im trying to find solution but everytime it fails. PLEASE HELP ME
Click to expand...
Click to collapse
Samething happened to me. I did the same thing u did but nothing worked.
Can someone plz help us to get odin download work again.
you should go for latest rom. download from here: https://samsung-firmware.org/model/SM-G930F/region/BTU/
You will be satisfy with this.
Hi! Same error but different situation.
I was on the latest firmware 8.0 ITV, I wanted to downgrade to nougat, so I downloaded the first 7.0 firmware BTU (the one that was the best for my S7).
I opened all the firmware files on odin 3.13.1 and I started the procedure but at a certain point everything stopped, on odin the message "failed" appeared and on the phone the message "sw rev check fail (bootloader) device 2 binary 1".
I tried with a different version of odin but the message remains the same, I also tried without flashing the BL file but nothing ... In the end I had to flash again the latest firmware oreo ITV and no errors appeared, but I find myself at the starting point
specific that my S7 has never had modding operations, the knox counter is perfectly at 0x0, I have always used only original firmware and never had problems with odin.
How can I downgrade without having in that error?
Hi just flash this version of latest nougat G930FXXS2DRDI, this is binary 2 firmware (XEO)