Error while installing G935U on S7E - AT&T Samsung Galaxy S7 Edge ROMs, Kernels, Recover

Please help..
I reviewed many threads for an answer and posted my question in another thread but failed to get an update.
I am trying to install G935U on G935S. It always fail and couldnt flash the device properly. Also, ROM is in Korean and I want it in English. Please help.
I download the latest firmware from Sam mobile. Below error when using Home_CSC. With CSC_OYM, it stays at Setup Connection and finally fails. Tried with ODIN versions - 3.12.1, 3.12.3, 3.13.1, 3.13.3, 3.13.1_3B_PatcheD, 3.12_PrinceComsy with no luck.
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Can someone please help me??

It appears no one has the know-how to get any of this going on the 935u. So disappointing.......

Related

[Completed] Odin does not work in samsung galaxy s4 (i9500)

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9500XXUHOA7_CL3943544_QB3767100_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I9500XXUHOA7_CL3943544_QB3767100_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I9500XXUHOA7_CL3943544_QB3767100_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_SER_I9500SERHOA7_CL3943544_QB3767100_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
then still silent, what i do? I m installed Samsung Driver.
Hi, thank you for using XDA Assist. If you have kies installed, uninstall it. It can get in the way. Then try different usb ports, the ones in the back of the pc, and different cables. If you're still having problems you can ask here,http://forum.xda-developers.com/showthread.php?t=2192886
Thread closed.

PIT file for (SM-N950U)

Hi
my phone have only download mood while I was trying to setup Android 9 on my phone I need the PIT file to complete setup the OS.
I have Samsung galaxy Note 8 SM-N950U 64GB unlocked ATT ...
Please help me .
____________________________________
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1303)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 6768 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Dradka said:
Hi
my phone have only download mood while I was trying to setup Android 9 on my phone I need the PIT file to complete setup the OS.
I have Samsung galaxy Note 8 SM-N950U 64GB unlocked ATT ...
Please help me .
____________________________________
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1303)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 6768 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
Disable the "Re-Partition" option...you shouldn't need that.
Also be sure you download the full Pie Odin files and new Odin version found in the thread here: [LINK]
HTCOmega said:
Disable the "Re-Partition" option...you shouldn't need that.
Also be sure you download the full Pie Odin files and new Odin version found in the thread here: [LINK]
Click to expand...
Click to collapse
I'm already disabled the "Re-Partition" option , but my phone stuck on "Set Partition" on Odin (the last version) so I need the PIT file for my phone to complete setup, but I don't know how I can have it ....:crying:
Dradka said:
I'm already disabled the "Re-Partition" option , but my phone stuck on "Set Partition" on Odin (the last version) so I need the PIT file for my phone to complete setup, but I don't know how I can have it ....:crying:
Click to expand...
Click to collapse
I pullled the PIT file from my official AT&T Pie download if you still need it, and it's attached below. Just unzip it and load to Odin.
I only now realized the PIT file is part of the CSC file thanks to this post: [HERE]...I suggest taking a look at it for good measure.
Hope this helps.

Rpmb fuse blown - rpmb provisioned

Hey guys
(I have Note 8 SM-N950U ATT unlocked )
I was looking to flash back to the new official android pie (because I went to the OneUI beta and wanted to flash the official one )and I booted into Download mode when I saw
RPMB FUSE BLOWN
RPMB PROVISIONED
and when I try to flash the new android I stuck on download mood and I can't flash any android on my phone.
Please help me.
____________________________________
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1303)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 6768 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Dradka said:
Hey guys
(I have Note 8 SM-N950U ATT unlocked )
I was looking to flash back to the new official android pie (because I went to the OneUI beta and wanted to flash the official one )and I booted into Download mode when I saw
RPMB FUSE BLOWN
RPMB PROVISIONED
and when I try to flash the new android I stuck on download mood and I can't flash any android on my phone.
Please help me.
____________________________________
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1303)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 6768 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
RPMB FUSE BLOWN is normal and it's blown on everyone's phone.. The second issue is you're probably using the wrong firmware so it's not going to work.. You're supposed to use odin to flash back to the firmware you had before you used the beta pie firmware version.. At this point I would recommend that you odin back to the firmware version you were on before you used the pie version and let the phone automatically OTA update itself!
MrMike2182 said:
RPMB FUSE BLOWN is normal and it's blown on everyone's phone.. The second issue is you're probably using the wrong firmware so it's not going to work.. You're supposed to use odin to flash back to the firmware you had before you used the beta pie firmware version.. At this point I would recommend that you odin back to the firmware version you were on before you used the pie version and let the phone automatically OTA update itself!
Click to expand...
Click to collapse
I have the same error
<ID:0/004> Added!!
<ID:0/004> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1303)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 4920 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Odin stuck here
Dradka said:
I have the same error
<ID:0/004> Added!!
<ID:0/004> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1303)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 4920 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Odin stuck here
Click to expand...
Click to collapse
Try using a different version of odin look for a newer version or the edited version. Also you need to read this first page about downgrading back..
https://forum.xda-developers.com/galaxy-note-8/how-to/snapdragon-official-note-8-n950u1-t3893612
Something about AT&T being in a boot loop..
MrMike2182 said:
RPMB FUSE BLOWN is normal and it's blown on everyone's phone.. The second issue is you're probably using the wrong firmware so it's not going to work.. You're supposed to use odin to flash back to the firmware you had before you used the beta pie firmware version.. At this point I would recommend that you odin back to the firmware version you were on before you used the pie version and let the phone automatically OTA update itself!
Click to expand...
Click to collapse
MrMike2182 said:
Try using a different version of odin look for a newer version or the edited version. Also you need to read this first page about downgrading back..
https://forum.xda-developers.com/galaxy-note-8/how-to/snapdragon-official-note-8-n950u1-t3893612
Something about AT&T being in a boot loop..
Click to expand...
Click to collapse
I tried many versions of Odin and the same stuck on the Set Partition step , Is that mean I need the PIT file to flash the new firmware?.
I have SM-N950U not SM-N950U1 and I have only Download mode .
SM-N950U doesn't has ATT firmware and when I asked about the stock ATT firmware SamMobile said that I can use USC or CCT firmware .
I don't know how I can fix it .
MrMike2182 said:
Try using a different version of odin look for a newer version or the edited version. Also you need to read this first page about downgrading back..
https://forum.xda-developers.com/galaxy-note-8/how-to/snapdragon-official-note-8-n950u1-t3893612
Something about AT&T being in a boot loop..
Click to expand...
Click to collapse
I used Odin 3 (Odin Prince Comsy) and I has this error
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
Dradka said:
I used Odin 3 (Odin Prince Comsy) and I has this error
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Yes you need the PIT file it's the CSC file just extract that one file and not all of them and then in odin options add the PIT file and then in the other options select re-partition and also Nand erase all and then try. Make sure you're using N950U firmware ONLY and NOT N950U1!! By the way at the very end of the files you're flashing DELETE the part at the end of it the .md5 part so it only says .tar
MrMike2182 said:
Yes you need the PIT file it's the CSC file just extract that one file and not all of them and then in odin options add the PIT file and then in the other options select re-partition and also Nand erase all and then try. Make sure you're using N950U firmware ONLY and NOT N950U1!! By the way at the very end of the files you're flashing DELETE the part at the end of it the .md5 part so it only says .tar
Click to expand...
Click to collapse
I have this using Odin3 v3.13
I have this using Odin.Prince.Comsy
Dradka said:
I have this using Odin3 v3.13
I have this using Odin.Prince.Comsy
Click to expand...
Click to collapse
I have no idea what is going on then bro.. Try an older version of odin then? Not prince comsy though you really shouldn't need that.. Try flashing the N950USQS5CRK1 firmware instead. Also try getting into recovery mode and select factory reset if you can.
MrMike2182 said:
I have no idea what is going on then bro.. Try an older version of odin then? Not prince comsy though you really shouldn't need that.. Try flashing the N950USQS5CRK1 firmware instead. Also try getting into recovery mode and select factory reset if you can.
Click to expand...
Click to collapse
Thanks bro.
I don't live in USA now and I have different SIM-card ,Is it necessary to have USA SIM-card to flash the new software?
Dradka said:
Thanks bro.
I don't live in USA now and I have different SIM-card ,Is it necessary to have USA SIM-card to flash the new software?
Click to expand...
Click to collapse
Where did you get the phone from? Is it an actual N950U or is it an N950F? Can you get into recovery mode and get me a screenshot?
MrMike2182 said:
Where did you get the phone from? Is it an actual N950U or is it an N950F? Can you get into recovery mode and get me a screenshot?
Click to expand...
Click to collapse
I don't have recovery mode , I have only download mode .
I was having the phone brand SM-N950U on download mode before this problem and after the problem the brand name gone and replaced with ( Rpmb fuse blown - rpmb provisioned )
This AT&T unlocked phone from USA and I'm sure that its N950U because I flashed many firmware before without problems (Just I have system UI error sometimes ) , and I checked it's IMEI on this site
https://www.imei.info/?imei=358502081255039
and it say that is SM-N950U
I'm not in USA now and Samsung service-care didn't help me and they said they only have service for N950F version .
so really I have a problem and I don't know how to solve it.!!
It sounds like you may have been on the U1 beta. In order to flash U firmware again, you have to use the patched version of Odin:
https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
datajosh said:
It sounds like you may have been on the U1 beta. In order to flash U firmware again, you have to use the patched version of Odin:
https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Click to expand...
Click to collapse
still having the same problem, sadly patched-odin not working too. :crying::crying::crying:
Dradka said:
still having the same problem, sadly patched-odin not working too. :crying::crying::crying:
Click to expand...
Click to collapse
What options are you selecting in odin when you go to try to flash something?
datajosh said:
It sounds like you may have been on the U1 beta. In order to flash U firmware again, you have to use the patched version of Odin:
https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Click to expand...
Click to collapse
MrMike2182 said:
What options are you selecting in odin when you go to try to flash something?
Click to expand...
Click to collapse
I selected (Auto Reboot) and (F. Reset Time)
______________________________________________________
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 4920 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Dradka said:
I selected (Auto Reboot) and (F. Reset Time)
______________________________________________________
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 4920 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
Apparently it's failing to re-partition the phone.. You'll need to get the PIT file out of the .tar file that you downloaded and add it in odin and tick re-partition..
MrMike2182 said:
Apparently it's failing to re-partition the phone.. You'll need to get the PIT file out of the .tar file that you downloaded and add it in odin and tick re-partition..
Click to expand...
Click to collapse
I put the pit file but I still having the same problem
__________________________________________
Can I try different model firmware like SM-N950U1?
Dradka said:
I put the pit file but I still having the same problem
__________________________________________
Can I try different model firmware like SM-N950U1?
Click to expand...
Click to collapse
Yes just use the right odin.. Read about it in the N950U1 thread.
nothing work
MrMike2182 said:
Yes just use the right odin.. Read about it in the N950U1 thread.
Click to expand...
Click to collapse
Sadly, nothing work !!!:crying::crying::crying:

Can someone please help me with this Odin error?

<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> apdp.mbn
<ID:0/004> msadp.mbn
<ID:0/004> persist.img.ext4
<ID:0/004> dqmdbg.img.ext4
<ID:0/004> carrier.img.ext4
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 5680 M
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Im trying to update my firmware on my SM-G960U (Galaxy S9 T-Mobile) through Odin but this always comes up. What do I do?
Try changing computer. Use a computer with usb 2.0 slot. Idk why...

Unable to Flash the Stock ROM on S7 using Odin tool

Hi I am facing an issue with my Samsung galaxy s7 sm-g930fd, I cannot flash the ROM/OS using the Odin tool 3.13.1.
Previously I was running Custom ROM and I decided to change to another Custom ROM from android 10 to android 9 one UI.
When I flash the android 9 ROM, It stuck into a boot loop and also I am not able to get into TWRP recovery.
So i decided to use Odin and flash TWRP recovery in it but it didn't work.
Now I am trying flash stock ROM/OS but I am not able to do that as well.
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 4291 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
with pit file
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 4007 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-------------------------------------------
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FAP LOCK: OFF
Secure Download: Enable
WARRANTY VOID: 1 (0X030c)
RP SWREV B:7 K:5 S:6
Thank you.
Uninstall the Samsung usb drivers, delete the folder "C:\Program Files\Samsung" if you don't have anything else Samsung installed.
Try downloading the latest Samsung drivers.
Try Odin3_v3.14.4 worked for my S7

Categories

Resources