Related
Like the title says, I can´t boot to recovery (Oneplus one). If I try to boot to recovery, I´m ending in the Qualcomm CrashDump Mode.
I have a Oneplus 7 Pro with Stable 10.0 BA FW.
Rooted with Magisk (Patched Boot.img) Is this causing the problem?
After pressing Vol+ and powerbutton, the devices boots normally.
Thanks in advance.
RealDanyo said:
Like the title says, I can´t boot to recovery (Oneplus one). If I try to boot to recovery, I´m ending in the Qualcomm CrashDump Mode.
I have a Oneplus 7 Pro with Stable 10.0 BA FW.
Rooted with Magisk (Patched Boot.img) Is this causing the problem?
After pressing Vol+ and powerbutton, the devices boot normally.
Thanks in advance.
Click to expand...
Click to collapse
I had the same issue this morning when trying to update to 10.0.1. Just boot to bootloader and boot twrp then install 10.
I think is the magisk update (magisk 20.0) that causes this, because it's happening to me in the beta 3 and before I updated magisk it was working fine with the beta 2
ItsTecnoDavid said:
I think is the magisk update (magisk 20.0) that causes this, because it's happening to me in the beta 3 and before I updated magisk it was working fine with the beta 2
Click to expand...
Click to collapse
I have no issues with magisk or twrp.
It might be the way you are installing ota or rom.
Might be model specific not sure as I don't know what model you are on. Mine is GM1915.
I'm talking about the official recovery
GM21AA, exactly the same situation (from 10 stable to 10.0.1 and magisk from 19.4 beta to 20) and the stock recovery bump into Qualcomm Crashdump problem here, system bootup normal as well as bootloader.
Troubleshooting:
1. Local update twice, install magisk at inactive slot OTA before reboot, for Android 10's A/B partitions machinasm , try let magisk patch both boot.img. Same...
2. Local update and reboot, lost root but stock recovery work, Fastboot boot twrp.img (latest, not flash, cause I don't need the permanent twrp)->twrp install magisk, reboot system, then, again, same problem.
Todo:
Magisk manager or twrp uninstall magisk, but if it's fail maybe ended up to bootloop, scary.
May try to install back old 19.4 magisk.zip via twrp, it's working in 10.0.0
Anyone with the same problem have any idea?
Thats the exact same error I ran into.
But as mentioned earlier, I never had TWRP on my OP7P. I flashed the patched boot.img via adb and I´m still on 10.0 BA Firmware.
I thought TWRP dosn´t work on Android Q (I´m coming from an Pixel3 and there it won´t work) So maybe I will give TWRP a try tomorrow. Are there different versions or is the official one the best?
RealDanyo said:
Thats the exact same error I ran into.
But as mentioned erlier, I never had TWRP on my OP7P. I flashed the patched boot.img via adb and I´m still on 10.0 BA Firmware.
I thought TWRP dosn´t work on Android Q (I´m coming from an Pixel3 and there it won´t work) So maybe I will give TWRP a try tomorrow. Are there different versions or is the official one the best?
Click to expand...
Click to collapse
The recovery here is the one to use.
https://forum.xda-developers.com/on...nt/recovery-unofficial-twrp-recovery-t3931322
Be sure to read through
So thanks erveryone who helped.
I now have TWRP running as recovery. So there is no need for official recovery. (and no Qualcomm CrashDump Mode)
Had this happen to me earlier this week. Just ended up using the MSM tool and restoring shipping firmware. You can look for the unbricking thread here for more info on that.
Yea, this just happened to me. Updated Magisk, Updated to 10.0.1 from 10.0. Booted fine.
Re-installed a few magisk modules (didn't just re check the modules, but reinstalled each)
Now OS won't boot, and recovery goes to Crash Dump. Would be ok if OS wouldn't bootloop and I could get to OS.
Oh, and my ADB now is an unauthorized device while its in bootloop mode
EDIT:
phew. Tried to hold volume up+dn rather than up or dn, got into bootloader. Able to fastboot boot TWRP and then delete problematic RIRU magisk modules. All is well in the world now...
I don't get it why it have to be so hard.
I'm constantly soft bricking/ bootlooping this phone when trying to do simple things such flashing magisk and twrp. I remember it being so much easier with my Poco F1, never got close to bricking it.
Now every little mistake ends with a bricked phone and 5 hours on the internet trying to understand why
WillyRy said:
Yea, this just happened to me. Updated Magisk, Updated to 10.0.1 from 10.0. Booted fine.
Re-installed a few magisk modules (didn't just re check the modules, but reinstalled each)
Now OS won't boot, and recovery goes to Crash Dump. Would be ok if OS wouldn't bootloop and I could get to OS.
Oh, and my ADB now is an unauthorized device while its in bootloop mode
EDIT:
phew. Tried to hold volume up+dn rather than up or dn, got into bootloader. Able to fastboot boot TWRP and then delete problematic RIRU magisk modules. All is well in the world now...
Click to expand...
Click to collapse
Same issue here and no TWRP installed.
I did ADB REBOOT FASTBOOT and was able to install the twrp image by FASTBOOT BOOT twrp-3.3.1-70-guacamole-unified-Q-mauronofrio.img
Going to try and remove Magisk and see if I can salvage my data and then re-install Magisk afterwards.
Ok...got back into the system by flashing the Magisk Uninstaller in TWRP that is here: https://magiskroot.net/md/Magisk_Manager_for_Recovery_Mode_(mm)-2019.4.4.zip
Went to advanced in TWRP, then to terminal, then typed mm.
Typed in C for Core only to load into system without Magisk. Deleted my Magisk modules that may have interfered with it (I had an older version of No Limit that I should have updated prior. After removing and rebooting back into system, all is fine now.
JLine05 said:
Same issue here and no TWRP installed.
I did ADB REBOOT FASTBOOT and was able to install the twrp image by FASTBOOT BOOT twrp-3.3.1-70-guacamole-unified-Q-mauronofrio.img
Going to try and remove Magisk and see if I can salvage my data and then re-install Magisk afterwards.
Ok...got back into the system by flashing the Magisk Uninstaller in TWRP that is here: https://magiskroot.net/md/Magisk_Manager_for_Recovery_Mode_(mm)-2019.4.4.zip
Went to advanced in TWRP, then to terminal, then typed mm.
Typed in C for Core only to load into system without Magisk. Deleted my Magisk modules that may have interfered with it (I had an older version of No Limit that I should have updated prior. After removing and rebooting back into system, all is fine now.
Click to expand...
Click to collapse
Yea man, things are hinkey this update.
My big problem was i had twrp but it got wiped i guess (could no longer access) and couldn't access adb nor fastboot. But finally got into bootloader (cmd fastboot) so was able to fix.
Easier solution than installing Magisk uninstaller (presuming one has twrp installed, which would be the case if able to flash Magisk uninstaller) is go to TWRP>advanced>file manager and navigate data/adb/modules and delete from there
DO you guys know if there is an updated magisk being developed or what is the way to fix it? Uninstall magisk via TWRP (since I can temporarily install and get into TWRP using the all in one tool by the TWRP developer). Then install TWRP and then Install Magisk ?
I have same problem
How to fix it and bring back stock recovery?
wawanRedblack said:
I have same problem
How to fix it and bring back stock recovery?
Click to expand...
Click to collapse
Can you boot OS?
Can you get to bootloader?
WillyRy said:
Can you boot OS?
Can you get to bootloader?
Click to expand...
Click to collapse
Yes i can boot os and bootloader is ok
I had latest magisk (stable version) installed and tried to disable it from magisk manager->uninstall->restore images.
when i restarted the phone it stuck on bootloader screen.
I tried to got to twrp recovery mode and it's stuck on the flash screen.
Why would magisk manager put a button which is not working at all and bricks the phone? Please guide me what to do.
JerryGoyal said:
I had latest magisk (stable version) installed and tried to disable it from magisk manager->uninstall->restore images.
when i restarted the phone it stuck on bootloader screen.
I tried to got to twrp recovery mode and it's stuck on the flash screen.
Why would magisk manager put a button which is not working at all and bricks the phone? Please guide me what to do.
Click to expand...
Click to collapse
Maybe you did something wrong and this isn't Magisk fault ?
Go to twrp and wipe system and vendor DO NOT REBOOT, flash OOS zip and twrp again, and it shall work,
NOTE: you will NOT lose any files or data
J0nhy said:
Go to twrp and wipe system and vendor DO NOT REBOOT, flash OOS zip and twrp again, and it shall work,
NOTE: you will NOT lose any files or data
Click to expand...
Click to collapse
too late for me i wiped all data. Thanks though, it shall help future readers.
next time, before wipe, try to flash magisk uninstaller first
Try to flash stock boot image.
After i tried to install busybox trough magisk manager on my 7 pro i can't boot in to the system anymore, I already deleted all magisk modules trough recovery and it is still booting directly in to fastboot mode.
Is there any way to boot in to the system again without flashing stock rom ?
Twrp is still accessible.
Im running Android 10, the newest magisk and the newest twrp.
Edit: found the solution, i Just used the fix Recovery bootloop option in twrp and it worked all fine but i needed to flash magisk again
powerbuffboy said:
After i tried to install busybox trough magisk manager on my 7 pro i can't boot in to the system anymore, I already deleted all magisk modules trough recovery and it is still booting directly in to fastboot mode.
Is there any way to boot in to the system again without flashing stock rom ?
Twrp is still accessible.
Im running Android 10, the newest magisk and the newest twrp.
Edit: found the solution, i Just used the fix Recovery bootloop option in twrp and it worked all fine but i needed to flash magisk again
Click to expand...
Click to collapse
Hey powerbuffboy, I have the same issue,
I can't seem to find this "fix recovery bootloop" option.
What version of TWRP are you running?
powerbuffboy said:
After i tried to install busybox trough magisk manager on my 7 pro i can't boot in to the system anymore, I already deleted all magisk modules trough recovery and it is still booting directly in to fastboot mode.
Is there any way to boot in to the system again without flashing stock rom ?
Twrp is still accessible.
Im running Android 10, the newest magisk and the newest twrp.
Edit: found the solution, i Just used the fix Recovery bootloop option in twrp and it worked all fine but i needed to flash magisk again
Click to expand...
Click to collapse
You can also try to flash boot.img ... It may fixed the issue
powerbuffboy said:
After i tried to install busybox trough magisk manager on my 7 pro i can't boot in to the system anymore, I already deleted all magisk modules trough recovery and it is still booting directly in to fastboot mode.
Is there any way to boot in to the system again without flashing stock rom ?
Twrp is still accessible.
Im running Android 10, the newest magisk and the newest twrp.
Edit: found the solution, i Just used the fix Recovery bootloop option in twrp and it worked all fine but i needed to flash magisk again
Click to expand...
Click to collapse
Same problem, solved in same way, but i cant install Magisk again without going to bootloop
Cronoss said:
Hey powerbuffboy, I have the same issue,
I can't seem to find this "fix recovery bootloop" option.
What version of TWRP are you running?
Click to expand...
Click to collapse
Go to TWRP/ Advanced and click on Fix Recovery Bootloop
PS.
Im talking about TWRP 3.3.1.79-maurofrio
PPS.
You will lose ROOT
Hello guys!
The story began, when I accidently installed a stock OTS update by OP onto my already rooted OP6 with Magsik and TWRP, running a NoLimits ROM...
I just noticed, that the phone said "restart to finish OTS upgrade" or some kind of thing..... I always had the notification on my screen that an update would be available....what surely was ignored because running NoLimits ROM.... but because of some unknown reason, the stock update installed itself magically...
So I ended up finding my phone in complete stock condition, just the unlocked bootloader remained..... F*CK!
I tried to go back to root by trying to install TWRP via fastboot...and that was the beginnig of the end...
By fastboot boot twrp.img, the phone just remained in fastboot mode..... no twrp screen showed up... repeated this a few times, nothing changed....
Somewhere here I read to look up the current slot.... so I did fastboot getvar current-slot.... and after slot b was shown, I flashed twrp into slot b by fastboot flash boot_b twrp.img..... which had the phone stuck in screen "the bootloader is unlocked.....".... so i think that's what is called a BRICK...?
Please guys, help me out...as I don't know how to go on.... I also tried to flash stock boot img from here via fastboot, what didn't work either....
Would be glad for any suggestions...
Thanks!
Alex
dr.zikzak said:
Hello guys!
The story began, when I accidently installed a stock OTS update by OP onto my already rooted OP6 with Magsik and TWRP, running a NoLimits ROM...
I just noticed, that the phone said "restart to finish OTS upgrade" or some kind of thing..... I always had the notification on my screen that an update would be available....what surely was ignored because running NoLimits ROM.... but because of some unknown reason, the stock update installed itself magically...
So I ended up finding my phone in complete stock condition, just the unlocked bootloader remained..... F*CK!
I tried to go back to root by trying to install TWRP via fastboot...and that was the beginnig of the end...
By fastboot boot twrp.img, the phone just remained in fastboot mode..... no twrp screen showed up... repeated this a few times, nothing changed....
Somewhere here I read to look up the current slot.... so I did fastboot getvar current-slot.... and after slot b was shown, I flashed twrp into slot b by fastboot flash boot_b twrp.img..... which had the phone stuck in screen "the bootloader is unlocked.....".... so i think that's what is called a BRICK...?
Please guys, help me out...as I don't know how to go on.... I also tried to flash stock boot img from here via fastboot, what didn't work either....
Would be glad for any suggestions...
Thanks!
Alex
Click to expand...
Click to collapse
i remember that NoLIMIT rom mustbe uninstall before update the oos.In your case i think it was bootloop,softbrick.You boot into fastboob mood and use fastboot rom. and you can root and instant TWRP again.
soihuvuontrang said:
i remember that NoLIMIT rom mustbe uninstall before update the oos.In your case i think it was bootloop,softbrick.You boot into fastboob mood and use fastboot rom. and you can root and instant TWRP again.
Click to expand...
Click to collapse
Hello!
Nothing is working at the moment, just fastboot... not recovery mode, no booting into the OTS...
Tried to use MSM tool but it can't even find the right port....at first, I had COM3 and COM4 showing up, but only N/A....
Now i uninstalled the qualcom drivers as suggested in an unbrick thread of the OP 5T, but that made every port disappear in the MSM tool list.... I'm f*cked I guess...
How can I fix that driver mess again? (driver signing is disabled in bios, testmode is available an working on my pc)
Thanks,
Alex
dr.zikzak said:
Hello!
Nothing is working at the moment, just fastboot... not recovery mode, no booting into the OTS...
Tried to use MSM tool but it can't even find the right port....at first, I had COM3 and COM4 showing up, but only N/A....
Now i uninstalled the qualcom drivers as suggested in an unbrick thread of the OP 5T, but that made every port disappear in the MSM tool list.... I'm f*cked I guess...
How can I fix that driver mess again? (driver signing is disabled in bios, testmode is available an working on my pc)
Thanks,
Alex
Click to expand...
Click to collapse
If you can access fastboot mode you can try follow procedure in next thread:
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
I could recover my system with this @mauronofrio tool a couple of times. In fact, i never have used MSM tool.
dr.zikzak said:
Hello!
Nothing is working at the moment, just fastboot... not recovery mode, no booting into the OTS...
Tried to use MSM tool but it can't even find the right port....at first, I had COM3 and COM4 showing up, but only N/A....
Now i uninstalled the qualcom drivers as suggested in an unbrick thread of the OP 5T, but that made every port disappear in the MSM tool list.... I'm f*cked I guess...
How can I fix that driver mess again? (driver signing is disabled in bios, testmode is available an working on my pc)
Thanks,
Alex
Click to expand...
Click to collapse
boot in to fastboot mode and your fone is not brick,so msm tool isn't used .
you can download newest driver for oneplus on google.
and you can find on forum. hope you will be successful
Kurtinaitis said:
If you can access fastboot mode you can try follow procedure in next thread:
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
I could recover my system with this @mauronofrio tool a couple of times. In fact, i never have used MSM tool.
Click to expand...
Click to collapse
I'll have a try..,.thanks for that!
Regards,
Alex
The method of @mauronofrio worked!!! Thanks a lot!
But I still can't boot twrp on the phone....if I do so, the phone boots into fastboot mode again and freezes at "1+ logo" with "Fastboot Mode" below it..... same like before? The device is fully wiped now...
So how can I get TWRP working again...??
I also tried fastboot flash recovery twrp.img -> no such partition..... don't know why it worked the first time I did it, root and custom ROM without any issues...
Thanks,
Alex
dr.zikzak said:
The method of @mauronofrio worked!!! Thanks a lot!
But I still can't boot twrp on the phone....if I do so, the phone boots into fastboot mode again and freezes at "1+ logo" with "Fastboot Mode" below it..... same like before? The device is fully wiped now...
So how can I get TWRP working again...??
Thanks,
Alex
Click to expand...
Click to collapse
It seems a problem with TWRP version or Fastboot command.
Please, describe your method to flash TWRP and which version do you want to flash
Kurtinaitis said:
It seems a problem with TWRP version or Fastboot command.
Please, describe your method to flash TWRP and which version do you want to flash
Click to expand...
Click to collapse
I downloaded latest twrp-3-3-1.2 (I think) for my OP6, copied the belonging .zip file to my phone... started cmd as admin, typed fastboot devices....the device showed up, then fastboot boot twrp...........img.....enter, and afterwards the "1+" logo showed up, below it read Fastboot Mode...and nothing ever happened... till i switched the phone off again after 10 minutes...
Wrong version you think?
Thanks,
Alex
If you are on Android 10 try to download last version from Mauronofrio or last from Blu-Spark (V9.109). I use blu_spark with OOS 10.3.3
Sometimes the command for being able to boot in recovery from Fastboot is:
Fastboot flash boot "nameofTWRPimage".img
Flash a patched boot image of your rom via fastboot and than flash twrp installer through magisk manager. Done.
Kurtinaitis said:
If you are on Android 10 try to download last version from Mauronofrio or last from Blu-Spark (V9.109). I use blu_spark with OOS 10.3.3
Sometimes the command for being able to boot in recovery from Fastboot is:
Fastboot flash boot "nameofTWRPimage".img
Click to expand...
Click to collapse
Yes that worked for me last time I attempted root.
TWRP update - no boot into system
Hello guys....it's me again!
After getting everything working again because of the tremendous help of this forum, i tried to update my twrp recovery via twrp by installing the twrp zip-file...
Afterwards, i tried to upgrade my rom from NoLimits 11.2 to 11.5 - but the phone didn't boot afterwards....i've always ended up in the recovery menue....
I then changed slots (from b to a) in the recovery, and then, the phone booted again....but into the stock ROM...
I can't change slots again now and have stock rom in slot a as it seams.... how can i change that again? how can i flash the custom rom in the right slot again?
Thanks in advance!
Regards,
Alex
dr.zikzak said:
Hello guys....it's me again!
After getting everything working again because of the tremendous help of this forum, i tried to update my twrp recovery via twrp by installing the twrp zip-file...
Afterwards, i tried to upgrade my rom from NoLimits 11.2 to 11.5 - but the phone didn't boot afterwards....i've always ended up in the recovery menue....
I then changed slots (from b to a) in the recovery, and then, the phone booted again....but into the stock ROM...
I can't change slots again now and have stock rom in slot a as it seams.... how can i change that again? how can i flash the custom rom in the right slot again?
Thanks in advance!
Regards,
Alex
Click to expand...
Click to collapse
It's OK. That's the point of having 2 slots system. Be able to recover the other partition if something goes wrong.
So now... Do you have TWRP or stock recovery?
You can dirty flash stock on the inactive Slot.
I would install stock rom in inactive slot through Local Update un System updater, don't reboot, install TWRP retention script in Magisk Manager (of course only if you have a proper TWRP running, if not avoid this step), don't reboot, install magisk to inactive Slot (through Magisk Manager), reboot.
After that you Will have stock on both partitions. You can try again the XXX Update.
Kurtinaitis said:
It's OK. That's the point of having 2 slots system. Be able to recover the other partition if something goes wrong.
So now... Do you have TWRP or stock recovery?
You can dirty flash stock on the inactive Slot.
I would install stock rom in inactive slot through Local Update un System updater, don't reboot, install TWRP retention script in Magisk Manager (of course only if you have a proper TWRP running, if not avoid this step), don't reboot, install magisk to inactive Slot (through Magisk Manager), reboot.
After that you Will have stock on both partitions. You can try again the XXX Update.
Click to expand...
Click to collapse
Thanks for the fast answer!
I think TWRP is working, nur on slot B - the question is: how come that i Installed TWRP Update via TWRP Recovery, was able to reboot Ingo recovery, and after Flash of the ROM via TWRP, only TWRP Recovery was left... No bootable ROM, so i tried Slot A and that was Stock Rom...
How can i install stock ROM into Slot B if Slot A is currently 'running'?
Regards,
Alex
dr.zikzak said:
Thanks for the fast answer!
I think TWRP is working, nur on slot B - the question is: how come that i Installed TWRP Update via TWRP Recovery, was able to reboot Ingo recovery, and after Flash of the ROM via TWRP, only TWRP Recovery was left... No bootable ROM, so i tried Slot A and that was Stock Rom...
How can i install stock ROM into Slot B if Slot A is currently 'running'?
Regards,
Alex
Click to expand...
Click to collapse
Since Oxygen Os Updater > Local Upgrade.
Download 10.3.4 OOS and put in your internal Storage. Then follow procedure i wrote before
Kurtinaitis said:
Since Oxygen Os Updater > Local Upgrade.
Download 10.3.4 OOS and put in your internal Storage. Then follow procedure i wrote before
Click to expand...
Click to collapse
NOTE: don't reboot until you install Magisk to inactive Slot, and of course, as you're rooted must download Full Zip (not incremental)
Kurtinaitis said:
NOTE: don't reboot until you install Magisk to inactive Slot, and of course, as you're rooted must download Full Zip (not incremental)
Click to expand...
Click to collapse
I downloaded Oxygen Updater, also OOS 10.3.4, but in my system stettings, update button is greyed out.... with the nolimits ROM before, I once had issues that the OEM update got installed...so that led to my problem which made me open up this thread in the first place.... so i disabled system update via titanium backup when I had root access...
So now it's greyed out...but as it is the stock rom, it shouldn't be greyed out as titanium backup doesn't work at the moment, without root...
Should i flash via @mauronofrio's method and fully wipe the device?... would be a pain in the a.. as everything gets erased again, setting up from scratch 2 times within 3 weeks
Regards,
Alex
Would it be possible to install magisk without twrp, and then flash the NoLimits ROM via Magisk?
TWRP recovery must be there....only in slot B - i tried to change slot by fastboot --set-active=..... but it didn't work, unknown command
Regards,
Alex
dr.zikzak said:
I downloaded Oxygen Updater, also OOS 10.3.4, but in my system stettings, update button is greyed out.... with the nolimits ROM before, I once had issues that the OEM update got installed...so that led to my problem which made me open up this thread in the first place.... so i disabled system update via titanium backup when I had root access...
So now it's greyed out...but as it is the stock rom, it shouldn't be greyed out as titanium backup doesn't work at the moment, without root...
Should i flash via @mauronofrio's method and fully wipe the device?... would be a pain in the a.. as everything gets erased again, setting up from scratch 2 times within 3 weeks
Regards,
Alex
Click to expand...
Click to collapse
Did you try to install the Update since the app Oxygen Updater?
---------- Post added at 09:08 PM ---------- Previous post was at 09:02 PM ----------
dr.zikzak said:
Would it be possible to install magisk without twrp, and then flash the NoLimits ROM via Magisk?
TWRP recovery must be there....only in slot B - i tried to change slot by fastboot --set-active=..... but it didn't work, unknown command
Regards,
Alex
Click to expand...
Click to collapse
I think there's some thread in Guides and News in which OP uploads some patched boot.img le something like that to have root but i never tried.
Hi!
I have a poco f2 pro that was on the xiaomi.eu MIUI weekly.
Yesterday I installed a module for Magisk and got into a bootloop. From now everything's fine I usually know how to deal with this kind of stuff.
The mistake I did, is when I tried to boot into a new TWRP after flashing.
I did
Code:
fastboot flash boot ./twrp_xxx.img
instead of
Code:
fastboot flash recovery ./twrp_xxx.img
I tried many times flashing different boot.img without success, I didn't managed to install "magisk manager for recovery" so I did a clean flash of the rom, and then I even tried downloading the stock global from from https://xiaomifirmwareupdater.com/ and did a "flashall" without success (the phone boots on bootloader/recovery).
Fortunately I havent yet locked the bootloader so I can still flash everything.
Can someone help me figure out why my phone is doing this even after flashing everything please?
Did you try with Miflash?
try with MiFlash. Flash stock rom in fastboot mode
Hi! Thak you for the quick answer
I don't know why but I believed that the only thing miflash do is to execute the scripts from the folder.... I'll try this now
Thelm76 said:
Hi! Thak you for the quick answer
I don't know why but I believed that the only thing miflash do is to execute the scripts from the folder.... I'll try this now
Click to expand...
Click to collapse
Before MiFlash try delete the Magisk module causing the bootloop, use TWRP File Manager. Magisk modules are located in /data/adb/modules
dhaern said:
Before MiFlash try delete the Magisk module causing the bootloop, use TWRP File Manager. Magisk modules are located in /data/adb/modules
Click to expand...
Click to collapse
Well that the thing I tried when I accidentally replaced my boot partition... And my phone was only booting on twrp or fastboot... also the weird thing I found is that /data/adb didn't exist
But many thanks to you all it works now.
I'll maybe try to make a guide on how to install Magisk on the Xiaomi EU weekly rom, as android 11 is only supported by the canary build. (if I manage to find a way to properly remove defective modules in TWRP :fingers-crossed
Boot twrp via Fastboot. Download Rom, Install ROM (xiaomi.eu). This should fix ist already. Then you could test a bit, and eventually need to wipe data
Tecardo said:
Boot twrp via Fastboot. Download Rom, Install ROM (xiaomi.eu). This should fix ist already. Then you could test a bit, and eventually need to wipe data
Click to expand...
Click to collapse
That was the first thing I tried, but only miflash managed to bring my phone back to life , as current twrp doesn't like encrypted data partition (I don't know why but it won't mount /data and it says wrong password)
I think that's why I couldn't remove the defective module
If you want everything to work you need to format data!!
Thats the point why using android 11 roms is hard, twrp cant decrypt it (until you flash rom with a10 and then a11 because partition is encrypted in a10 style)
Thelm76 said:
That was the first thing I tried, but only miflash managed to bring my phone back to life , as current twrp doesn't like encrypted data partition (I don't know why but it won't mount /data and it says wrong password)
I think that's why I couldn't remove the defective module
Click to expand...
Click to collapse
That's easy to fix, you installed Android 11 or? Don't use pin, use gesture. Twrp can't decrypt android 11 pin right now
Thelm76 said:
Hi!
I have a poco f2 pro that was on the xiaomi.eu MIUI weekly.
Yesterday I installed a module for Magisk and got into a bootloop. From now everything's fine I usually know how to deal with this kind of stuff.
The mistake I did, is when I tried to boot into a new TWRP after flashing.
I did
Code:
fastboot flash boot ./twrp_xxx.img
instead of
Code:
fastboot flash recovery ./twrp_xxx.img
I tried many times flashing different boot.img without success, I didn't managed to install "magisk manager for recovery" so I did a clean flash of the rom, and then I even tried downloading the stock global from from https://xiaomifirmwareupdater.com/ and did a "flashall" without success (the phone boots on bootloader/recovery).
Fortunately I havent yet locked the bootloader so I can still flash everything.
Can someone help me figure out why my phone is doing this even after flashing everything please?
Click to expand...
Click to collapse
NO flash only fastboot boot twrp.img