Related
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this ROM/KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point your finger at me for messing up your device, I will laugh at you.
* BOOM! goes the dynamite
*/
Hi XDA community, we are proud to present our vision of LineageOS with features that we think are useful. Hope you enjoy our builds as much as we do.
The main goal of Nuclear Team is to provide a clean and fast ROM with nice and useful features.
• Unified for both devices OP3 and OP3T in the same zip
• Based on LineageOs 14.1
• Android version 7.1.2_r8
• Custom kernel included (Radioactive kernel) with spectrum app support with preconfigured profiles
• Built with snapdragon clang and ubernaro 4.9.4 for rom and linaro 6.x kernel toolchains
• Optimized for fast app opening and disabled lot of debugging
• Nuclear Settings
• Customizable status bar (clock position, date, network indicators, battery style...)
• Gestures Anywhere
• Switch To Hide SuperSu from Status Bar
• Qualcomm Assertive Display
• Network traffic indicator
• Three finger swipe to screenshot
• Show cpu info
• Dt2s everywhere on lockscreen
• Options to modify dash board (number of columns... Etc)
• Option to disable warning color on low battery
• Full oms7 support (use substratum to theme the rom)
• Omniswitch
• Pocket detection for power button and screen off gestures
• Enhanced dialer with smart call feature
• MicroG and signature spoofing support for use the rom without gapps
• Enhanced system animation scale sliders in developer options
• Screen pinning selection in recents
• Show current and new version in package installer
• Oos camera included with option to use hal1 and hal3 simultaneously. ( see extra addon for enable/disable multihal )
• Option to disable screenshot sound
• More volume steps
• Option to unlock secured lockscreen (pin/pattern...etc) with fingerprint after reboot
• Substratum and Magisk tile in dashboard if is user installed
• All LineageOS goodies
•
-If you have a major bug to report that has not been reported already, and is not a known issue with CM,
please take the following steps to report it to us. It will save you time, as well as us.
-Download the Catlog app from the Play Store.
There is also a donate version which you can purchase to show appreciation.
-After downloading the Catlog app, go to the app settings, and change the log level to Debug.
-Clear all previous logs and take the exact steps to produce the error you are receiving.
-As soon as you receive the error (probably a force close), go straight into Catlog and stop the log recording.
-Copy and paste the entire log either to Hastebin or Pastebin
-Save the log, and copy and paste the link into the forum with a brief description of the error.
-You can also open trouble tickets on our website for bugs.
if you flash any mod or whatever besides supersu please don't subbmit any bug report
First install: If you come from another rom or another Android version
× Make a nandroid backup (optional but always recommended)
× Download Rom
× Firmware Rom
× Download 7.1 arm64 Gapps
× Wipe system,data,cache,dalvik
× Flash ROM , Firmware
× Flash GApps (optional)
× Flash SuperSU or LineageOS su addon for root(optional)
× Reboot
Updating:
× Flash ROM
× Reboot
Have fun....
Enjoy!
LineageOS
Lord Boeffla
Temasek
Ak
OrdenKrieger
ResurrectionRemix
Aicp
Aospextended
XDA
Flar2
Grarak
Koenkk
nvertigo
Nuclear Team & testers
And a very special thanks to TugaPower
Tirth Patel ([email protected])
Abhishek Agarwal (abhishek987)
Anyone I might have forgotten (please let me know)
Main devs are @Moludo, @lozo2010, @Ordenkrieger and @acuicultor is the kernel Dev.
Telegram support chat:HERE
If you want to buy us a beer/coffee you can donate Here all donations will serve to improve the rom.
Thanks to all donors!!!!
Please when do a donation tell your xda nickname in paypal message so i can give you proper credits here. Thanks.
XDA:DevDB Information
[ROM][7.1.2_r17][UNOFFICIAL] NuclearROM [OMS][07/06/2017], ROM for the Xiaomi Redmi Note 4
Contributors
[email protected]
Source Code: https://github.com/OneRomOne-N
ROM OS Version: 7.x Nougat
Based On: LineageOS
Version Information
Status: Beta
Current Beta Version: 1.2
Beta Release Date: 2017-06-07
Created 2017-03-25
Last Updated 2017-06-07
Reserved
Code:
Changelog :-
[B]BETA v1.2 :- (07/06/2017)[/B]
> Merged 7.1.2_r17 (June Security Patch)
> Added Toggle for Double Tap to Wake
> Added Vibrater Intensiy Control
> Added Toggle for Glove Mode
> Added f2fs support
> Vibrater Intensity Control
> Increased notification light brightness (it was too dim earlier)
> Disabled printk (Should see memory gaiin)
> Disabled few drivers dmesg Spam
> Fixed Reboot to Recovery Issues
> Compiled Kernel from Source (Instead of Prebuilt)
> Fixed Hotspot Issues
> Initial Sepolicy
> Drop FP Wrapper
[B]BETA v1.1 :- (05/05/2017)[/B]
> Fixed wlan logs saving in internal storage
> Fixed fpc fingerprint sensor (now fingerprint should work for all)
> Fixed headphone issue (where volume keys were not working)
> Fixed safetynet (which earlier failed with magisk)
> Updated blobs from latest miui
[B]BETA v1.0 :- (25/03/2017)[/B]
> Initial Build
> Fixed DT2W
> Fixed weird HW Key Layout
work on this Redmi Note 4X [Snapdragon 625]?
http://www.mi.com/hk/redminote4x/specs/
127cwho said:
work on this Redmi Note 4X [Snapdragon 625]?
http://www.mi.com/hk/redminote4x/specs/
Click to expand...
Click to collapse
Yes.
What's the difference from stock kernel?. And should we flash the su zip provided in the thread?. Does this new kernel support fast charging?
devilhunter47 said:
What's the difference from stock kernel?. And should we flash the su zip provided in the thread?. Does this new kernel support fast charging?
Click to expand...
Click to collapse
No its stock kernel, I just forgot to remove two lines from features. Still there is no kernel source available for this device yet
So far so good.
Browser fc's are present like linage...no deep sleep bug.
I'll update this very soon since its too long.
itsmedRb said:
Any unique features other than RR has?
Click to expand...
Click to collapse
It doesn't matter whether it has new features or not for Me. (I never tried frankly) I just need to properly update my all threads otherwise it'll be called dead.
*/ New Build Added / * (07/06/2017)
Changelog :-
> Merged 7.1.2_r17 (June Security Patch)
> Added Toggle for Double Tap to Wake
> Added Vibrater Intensiy Control
> Added Toggle for Glove Mode
> Added f2fs support
> Vibrater Intensity Control
> Increased notification light brightness (it was too dim earlier)
> Disabled printk (Should see memory gaiin)
> Disabled few drivers dmesg Spam
> Fixed Reboot to Recovery Issues
> Compiled Kernel from Source (Instead of Prebuilt)
> Fixed Hotspot Issues
> Initial Sepolicy
> Drop FP Wrapper
> Fixed wlan logs saving in internal storage
> Fixed fpc fingerprint sensor (now fingerprint should work for all)
> Fixed headphone issue (where volume keys were not working)
> Fixed safetynet (which earlier failed with magisk)
> Updated blobs from latest miui
Link :- OP
[email protected] said:
*/ New Build Added / * (07/06/2017)
Changelog :-
> Compiled Kernel from Source (Instead of Prebuilt)
Click to expand...
Click to collapse
Hi! Show the kernel source, that you used, please.
LOL what !??
why my spectrum told me "kernel not support"
Redmi Note4X,Snapdragon 625
Kernel:
3.18.55-perf-ga86ec....
[email protected] #1
Tue Jun 08:38:55 UTC 2017
Code:
/* Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you blame me in any way for what happens to your device, I will laugh at you.
* BOOM! goes the dynamite. And try to provide logs while reporting bugs.
*/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The goal of this project is to provide a pure AOSP experience, while combining the best elements from the other projects. Screw'd will always be AOSP based, and will never contain unneeded libs, binaries, bloat, or statistics.
Built from pure AOSP 8.1.0_r22
Statusbar tweaks
DUI Navigation
QS Panel Tweaks
Advanced Reboot
Expanded Desktop
Smartbar, Fling & Pulse
Customizable notification & batt lights
Recents Panel Tweaks
Lockscreen shortcuts
Too many to list here, view full features list
Get latest version here or here
OR
Download the version you prefer from here
Get flashable kernel zip here or here
Join the Google+ community for daily updates on future builds and discussion about Screw'd AOSP!!
Flashing instructions:
1. YOU MUST BE DECRYPTED. That means if you are coming from miui, you have to wipe (not format, wipe) your data. So always keep a backup.
Also, you shall need to wipe even if you came from miui to any other custom rom before this but did not wipe data.
2. Backup your stuff!!
3. Download the zip
5. Wipe /data and cache (Recommended, not always required)
6. Flash screwd_DEVICE-blahblahblah.zip
7. Flash GApps
8. Reboot it!!
Official Site
Supported Devices
Github {MrApocalypse}
Github {Screw'd AOSP}
Crowdin Translate {Help Us! It Would be great!}
Google
PureNexus
Dirty Unicorns
ABC ROM
AOSIP
AICP
The Screw'd Team
All translators who help translate Screw'd
All original authors of commits & patches
Most importantly you....the user.
XDA:DevDB Information
Screwd Aosp Unofficial, ROM for the Xiaomi Redmi Note 4
Contributors
sayan7848
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
Based On: AOSP
Version Information
Status: Stable
Created 2018-02-03
Last Updated 2018-07-07
Changelogs
Changelog for build 08.09.2.018 (w.r.t. 24.08.218)
* September security patch
* Gaming mode qs tile (device specific change, not available in official codebase)
* Upstreamed horcrux to 3.18.121 and compiled with clang 7.0.2
* Added intelli-thermal to horcrux
Treble build 24.08.2018
* Fixed du fonts cannot be applied without reboot
* Removed disable suggestions and conditions toggle from settings (it was buggy, and pretty useless)
* Horcrux kernel with some major changes : Synced with feather latest sources (3.18.119), kanged governors from ElectraBlue, Spectrum profiles (Electrablue profiles + my edits), Optional CPU Hotplug (AutoSMP) kanged from xenial, KSM support, ZRAM support (needs support from rom as well), compiled with linaro 7.3
* Latest changes from screwd upstream
Treble build 12.08.2018
Please clean flash
Device specific
* Removed rootless subs (pro : magisk hide should work properly, con : subs requires root, du fonts requires a reboot to be applied)
* P style volume slider
* Pending notification count
* Lockscreen max notification count
* Call recording in dialer (Automatic call recording option under Dialer settings > sound and vibrations, output file in /sdcard/CallRecordings)
* Fix resolver theming on system dark theme
* Excluded download manager from battery optimisation list. This fixes issue of android media fc
* Clear all fab button now syncs to system accent
* Fix wallpaper tint option for notification, power menu and recents
* Xiaomiparts not persisting kcal values after boot should be solved
* For a larger 100 sheet changelog, visit my github (http://bit.ly/2vCr3rT) :grin:
Screwd Changes
* Direct fingerprint unlock after reboot is back
* August security patch :kissing_heart:
* For detailed changelogs, please visit screwd github (http://bit.ly/2w0d4vi)
Kernel Changes
* Upstreamed to latest baracuda sources (EAS baby:heart_eyes::heart_eyes
* Youtube video issue should be fixed
* You want a still longer changelog ? Go here (http://bit.ly/2OthkLm)
Changelog for treble build 21.07.2018 (w.r.t 07.07.2018 build)
Device Changes
* Privacy guard, thanks to MSM-Extended team. Find it in settings > security
* Toggle for apply on boot in xiaomiparts
* Fixed kcal screen values not persisting after boot in xiaomiparts
* Plsease visit my git (github.com/sayan7848) for other "under-the-hood" changes
Screwd Changes
* Upstreamed as on 21.07.2018
* For detailed changelist please visit github.com/ScrewdAOSP
Kernel
Baracuda as default (thanks to @NATO66613). You get associated goodies like eas, out of the box spectrum support etc.
N.B. : Spectrum support has been integrated withn rom. So if you wish to flash a kernel which does not support spectrum, you might need to rmeove the spectrum init scripts.
Changelog for treble build 07.07.2018
My Changes :
1) Removed :
a) Some prebuilt apks (Via, MiXplorer, Retro), its a pain to keep them updated. Please install your desired alternatives after flashing
b) Some buggy/less secure/useless options (Android P animations, Unlock keystore with fingerprint directly after reboot, aod, lock screen font style (useless after lock screen clock and date styles) )
2) Added :
a) AOSP ambient display replaced with xiaomi doze
b) Spidey clock
c) Made digital bold clock hours red (thanks to @iamshoaib )
d) Fix for fluctuating network signal indicator (thanks to [email protected])
e) Less boring heads up toggle (ScrewdSettings > Notifications > Heads Up)
f) Rounded search in settings (imo, i think looks better)
g) Eleven music player from lineage
h) Thermal hals and other general code sync with lineage trees
Screwd Upstream Changes :
a) July patch
b) Omniswitch
c) All other updates from screwd sources as on 05.07.2018
Kernel Changes :
Synced with feather upstream
Changelog for final build 26.05.2018 (with respect to 22.05.2018 build)
1. Kanged some swag from du
a. Lockscreen clock style
b. Lockscreen date style
c. Toggle for tinting notification, recents, power menu with dominant color from wallpaper (find these in respective section of srewd settings)
2. Fix jio-jio calls being listed as missed calls in log (thanks OmniRom team and @Ritikrg )
3. Fix Stk force close
4. Thermal engine conf from lineage tree, should fix high ping issue
5. Kernel upstream to 3.18.110
It has been a great few months with you peeps. Thanks for all the love and support :innocent::innocent::innocent:
Changelog for treble build 22.05.2018 (with respect to 09.05.2018 build)
Device
1. Continuous animation scale in place of discrete in dev options (thanks to @bhi244)
2. Fixes for recents screen with p anim (thanks to @Alexey711)
3. Toggle to disable battery led on dnd mode
4. Qs tile to toggle hw keys
5. Lock screen clock font style
6. Fix for random brightness on d2s on statusbar
7. Removed rounded corners and notifications (user request, if you really want it, Pi Dark/Light is an excellent free sub theme)
8. Changes in prebuilt apps :
a) Add snap camera as default (replaces Camera2)
b) Add RetroMusic as default music player (relpaces Phonograph)
c) Add ViaBrowser as default web browser (replaces SnapBrowser)
d) Add MiXplorer
All credit to the respective developers
9. Misc changes as per lineage trees (excluding the enforcing thingy)
From upstream
1. Release 29 of android 8.1.0
2. Removed data disabling confirmation from qs tile
3. Sources synced as on 20.05.2018
Kernel Changes
1. Upstreamed to 3.18.109
2. Caf tag LA.UM.6.6.r1-08500-89xx.0
Changelog for treble build dated 09.05.2018 :
Device
1. Added rounded corners and notification as per user request, thanks @IamJoker03
2. Use square style accent picker in stead of round
3. Toggle for volume adjustment sound (later included in upstream)
4. Use transparent buttons for xiaomiparts
5. Mini header mode makes a return
6. Added some more du fonts (Bad Script, Acme, Helvetica, Lobster, ComicSansMS, Chococooky, Anaheim
7. Phix battery icon in battery status view on square style battery, thanks to @me_noob (later included in upstream)
8. Added some more qs tiles (sync, aod, expanded desktop)
From upstream
1. May patch
2. Volume wake keys
3. Russian translations thanks to our mido users @devilGhoul and his mates
4. Mini mode headers fixed
5. All other upstream changes as on 09.05.2018 (00:00:00 IST :grin: )
Kernel Changes
1. Rebranded my fork of @Adesh15 sir's Feather kernel as Horcrux, to avoid confusion
2. Fixed deep sleep issue
3. Upstreamed to 3.18.108
Changelog for treble build dated 01.05.2018 :
Device specific :
1) Fixed black screen on aod
2) Fixed XiaomiParts single stepping issue
3) Most probably encryption issue should be gone provided :
a) If you are coming straight from miui, u might need a format (not wipe) data before flashing
b) If you are coming from other rom where you encrypted your data, you will need a format data, thats only logical
4) Added choice for battery/weather at bottom of ambient display
5) Added option to unlink notification and ringer volume
Kernel changes :
ExFat/NTFS should work now, again could not test as I don't have an external sd-card
Note :
You will need a treble supported recovery and optionally treble magisk
Changelog for build dated 30.04.2018 :
Device specific :
1) Added back button backlight
2) Added P animations
3) XiaomiParts:
a) Flash light configs now persistent across boot
b) Add single stepping options
c) Add restore to default options
d) Front end for kcal control (that stuff for rgb,stauration, bla bla bla. Kernel needs to support that **** though)
Kernel changes :
1) Upstreamed to 3.18.107
2) Caf tag LA.UM.6.6.r1-08300-89xx.0
Changelog for build dated 27.04.2018 :
Device specific :
1) Vi is finally lit Tested on jio
2) Phix lockscreen power menu toggle
3) Phix qs data disable confirmation toggle
4) Some random ****
Changes from upstream :
1) A few new du fonts
2) All upstream changes as on 27.04.2018 IST 00:00:00
Kernel changes :
1) Feather upstreamed to 3.18.106
2) Added fp boost driver
Changelog for build dated 21.04.2018 (MUST BE CLEAN FLASHED) :
Device specific :
1) New "terrible" build , a huge shoutout to @merothh for helping with treble modification
2) SELinux changed to permissive for now
3) Added real time charging info
4) Vilte should be working, testing needed (again thanks @merothh)
Changes from upstream :
1) Compass tile added
2) All upstream changes as on 21.04.2018 IST 00:00:00
Kernel changes :
1) Feather treble kernel on board, thanks @Adesh15
Sidenote :
1) For proper rootless substratum, please use latest substratum apk from their Github Release page in place of the one from play store
2) Treble supported recovery and magisk is required, check OP for link
Changelog for build dated 18.04.2018 :
Device specific :
1) Added xiaomi parts (vibration strength, white/yellow flash intensity control), thanks @Lakku (screwd settigs > system)
2) Added music qs tile with toggle to display current track (screwd settings > ui > quick settings > misc)
3) Added toggle for data disabled icon (screwd settings > ui > status bar > misc)
4) Shift to lineage audio, media, display hals
5) Some under the hood magic, check git for details
Changes from upstream :
1) All upstream changes as on 18.04.2018 IST 00:00:00
Kernel changes :
1) Using electrablue kernel as default, thanks @LordArcadius
Sidenote :
For proper rootless substratum, please use latest substratum apk from their Github Release page in place of the one from play store
Changelog for build dated 07.04.2018 :
Device specific :
1) (Probably, testing needed) fixed roaming indicator toggle
2) (Accidentally) removed usb tether tile, my bad
3) Removed seperate three finger swipe ss gesture, the same can be set using carbon gestures
4) Some under the hood magic, check git for details
Changes from upstream :
1) April patch (android-8.1.0_r22)
2) Carbon gestures (Screwd Settings > Navigation > CarbonGestures)
3) New accent picker (Settings > Display > Accent Color)
4) DU font picker (Settings > Display > Font)
5) QS tile for ui style/accent
6) All other upstream changes as on 07.04.2018
Kernel changes :
1) (Probably, testing needed) added exfat/ntfs support
Sidenote :
For proper rootless substratum, please use latest substratum apk from their Github Release page in place of the one from play store
Changelog for build dated 01.04.2018 :
Device specific :
1) Fixed automatic apn
2) Fixed intent to dialer not sent from contacts app
3) Fixed aosp keyboard fc on glide typing
4) Added toggle for screenshot sound (Settings > sound > advanced)
5) Added toggle for roaming indicator (screwd settings > ui > statusbar > misc, testing needed)
6) Added usb tether qs tile
7) Several under the hood changes (picked from firehound tree by @IamJoker03)
Changes from upstream :
1) Fix for fc on pressing recents header icon
2) Substratum patches merged officially (yay )
3) All other upstream changes as on 01.04.2018, 09:00 IST :silly:
Kernel changes :
1) Merged caf tag LA.UM.6.6.r1-07200-89xx.0
Sidenote :
For proper rootless substratum, please use latest substratum apk from their Github Release page in place of the one from play store
Changelog for build dated 25..03.2018 :
Device specific :
1) Toggle for confirmation dialog when turning off data from QS (Screwdsettings > ui > statusbar > misc)
P.S. : Summary for this is derped, will be fixed in next build
2) Sim activation/deactivation switch (Settings > Newtork > Sim Cards)
3) Partial SS from QS
4) Several under-the-hood changes, check github for full list
Changes from upstream :
1) QS panel transparency
2) Minimal QS Header mode
3) Google assist tiles are back
3) All other upstream changes as on 25.03.2018
Kernel changes :
1) Upstreamed to 3.18.102
Changelog for build dated 19.03.2018 :
Device specific :
1) Fixed three finger screenshot gesture derp (find it in screwd settings > system > misc)
2) Kanged QS quick pulldown customisation from DU
3) Kanged Recents customisation from Bootloggers (thanks @merothh)
4) (Probably) fixed sd-ext write bug (thanks @Adesh15)
5) Updated substartum patches
6) Removed some prebuilts (KA, MiX, NexusWalls intentionally and Recorder unintentionally, it was a pain in you-know-where to keep apks updated )
7) Replaced play store version of Phonograph with Omni Rom's fork
8) Bla bla bla.......
Changes from upstream :
1) Memory bar over recents
2) Toggle for ripple while entering pin
3) Battery % on ambient display
3) All other upstream changes as on 13.03.2018 00:00 AM :silly::silly:
Kernel changes :
1) Upstreamed to 3.18.100
2) Merged CAF Tag LA.UM.6.6.r1-06700-89xx.0
Changelog for build dated 10.03.2018 :
Device specific :
1) Three finger screenshot gesture (find it in screwd settings > system > misc)
2) Replaced SnapBrowser with Via
3) Replaced Retro Music Player with Phonograph
4) Minor fixes for XiaomiDoze
5) Some bugs for you to discover :silly:
Changes from upstream :
1) March Security patch
2) Fix fc for slim recents and heads up settings
3) All other upstream changes as on 09.03.2018
Kernel changes :
1) Updated linaro toolchain
2) Upstreamed to 3.18.98
Changelog for build dated 02.03.2018 (CLEAN FLASH IS HIGHLY RECCOMENDED) :
Device specific :
1) SELinux is now enforcing, thanks @merothh @devstark15
2) Option to unlock keystore with fingerprint after boot (find in screwdshop>system>lockscreen)
3) KernelAdiutor added as prebuilt
4) Some improvements to xiaomi doze ui, it now syncs with settings theme, so ne need of manual theming of doze ui
5) New 'bholte' icon, kanged from Colt-OS oreo
6) Added some more bugs to fix in later builds
Changes from upstream :
1) Square battery option in battery customization
2) Fix for crash of some widgets
3) All other upstream changes as on 03.03.2018 (12:00 AM IST)
Kernel changes :
1) Kernel bundled with rom is now compiled with Linaro toolchain
2) Upstreamed to 3.18.97 and merged with latest caf-tag LA.UM.6.6.r1-06500-89xx.0
3) Disable low power bcl hotplug (fancy way of saying cores won't turn off automatically even on low power )
4) Some random stuffs
Changelog for build dated 23.02.2018 :
Device specific :
1) Seperate icons for three dnd profiles
2) Rmoved the "your sim is hd capable" notification, becuase we know that already
3) Mixplorer, Retro (replaces eleven) added as prebuilt
4) Replaced omni deskclock with cardinal desk clock, omni deskclock did not respect default alarm tone set from settings
5) Enabled always on display (tilt sensor is buggy)
6) Misc changes, check github commits for full list
Changes from upstream :
1) Toggle for face unlock
2) Dt2s on status bar
3) Option to left align clock in clock customization
4) All other upstream changes as on 23.02.2018 (4:30 PM IST)
Kernel changes :
1) Upstreamed to 3.18.95 and merged with latest caf-tag
2) New governors : electron, chill, relaxed
3) Added fp-booster drivers
4) Updated spectrum profile (for spectrum version)
5) Added wireguard support
Changelog for build dated 15.02.2018 :
Device specific :
1) Merged substratum sysserv commits => Rootless Substratum support
2) Light/Dark/Black theme for xiaomi doze ui
3) Fix stk crash
4) Made some other little changes, forgot what exactly :silly::silly:
Changes from upstream :
1) QS headers are back
2) Status bar battery icon customisation
3) Expanded desktop
4) All other upstream changes as on 15.02.2018
Kernel Changes :
1) Created a horcrux
2) Upstreamed to 3.18.94 and merged CAF tag LA.UM.6.6.r1-06200-89xx.0
3) Added alucard governor
4) For alternate variants, check OP
Changelog for build dated 09.02.2018 :
Device specific :
1) Added volte icon toggle
2) Added 4*4, 5*5, 6*6 pattern lock (thanks @Ravi7738)
3) Added offline charging animation (thanks again @Ravi7738)
4) Added xiaomi doze, find in display>advanced (thanks @merothh) [Note : I have not yet figured out how to sync the ui theme with screwd settings ui theme, so only dark theme for xiaomi doze for now]
5) Patch for omnivison sensors (thanks @muzaffarsyam for testing)
6) A Few other changes here and there
Changes from upstream :
1) February security patch
2) Lean app FC fixed
3) Clock customizations in screwd shop
4) Launcher3 now shows weather
5) All other upstream changes as on 09.02.2018
Kernel Changes :
Upstreamed to 3.18.93
Features/Apps/Resources used from other roms
FMRadio, Bluetooth, Recorder, AOSP keyboard from lineage os
DeskClock from Cardinal Aosp
Phonograph from OmniRom
Bugs
You tell me
Tips
1) Status bar ticker not working? Do a system ui restart
2) Cannot remove fingerprint? Rename the fingerprint and then retry
3) Cannot change quick settings layout? Expand Quick Settings > Edit Mode (Pencil icon) > Overflow menu (3 dot icon on top right)
Sources
1) Screwd Sources
2) Device Tree
3) Common device tree
4) Kernel Tree
5) Vendor Tree
Important links
1) Firmware by Alexy711
2) Redwolf Recovery
3) Modified OpenGapps by nezorflame
4) Official OpenGapps
5) Sir Abhishek's modified treble recovery and magisk
6) Redwolf Treble
More Credits
@IamJoker03 for teaching me @devstark15 for pixel style
@sagarshah1729 for dexpreopt fix
@LordArcadius @merothh @nikhil020 @Adesh15 for kernel sources at various point of time @abhishek987 for original treble implementation on mido (and pretty much everything ?)
Lord Torvalds
Did I miss anyone? Ping me
Some chitchat
Unofficial Telegram Group
How can you help me
Nothing much, just a thanks would suffice
What a place holder thread?
Thanks, let's try this one!!
Criston said:
What a place holder thread?
Click to expand...
Click to collapse
Dude, let me complete the thred first...writing a xda thread for the first time, will take some time:silly::silly:
Ask : any user facing bugs in following -
1) Gcam for omnivision sensor
2) Search in settings (not showing searched item like display, sound etc.)
Is Slim recents available?
hello..thank you for the rom..it is very fantastic this beta 8.1 ..but it's me or it has errors in wifi and mobile networks..I have searched for reset and other settings and data fails in jazztel..perdon in case I have not known configurar..o is not me?
busterdude said:
Is Slim recents available?
Click to expand...
Click to collapse
yup, check the ss please
Paco10 said:
hello..thank you for the rom..it is very fantastic this beta 8.1 ..but it's me or it has errors in wifi and mobile networks..I have searched for reset and other settings and data fails in jazztel..perdon in case I have not known configurar..o is not me?
Click to expand...
Click to collapse
No problem in either data or wifi for me. Could you please elaborate your issue a bit more?
good afternoon.sali miui9 eu..to test your Rom, and I had absolutely no problem in installation .. but when I connect wifi I realized that the signal of the network iva and venia..we went to configuration and apn jazztel click on Circle followed with the same problem, also wifi was closed. Maybe a reboot would have been enough. Or wipie on data ... you think? thank you the truth is a good job I thank you
Paco10 said:
good afternoon.sali miui9 eu..to test your Rom, and I had absolutely no problem in installation .. but when I connect wifi I realized that the signal of the network iva and venia..we went to configuration and apn jazztel click on Circle followed with the same problem, also wifi was closed. Maybe a reboot would have been enough. Or wipie on data ... you think? thank you the truth is a good job I thank you
Click to expand...
Click to collapse
Did you clean flashed? If yes then possible solutions :
1) Reboot or
2) Switch to airplane mode and back or
3) Set apn manually, you should get your operator configs over internet.
Sorry, but its an issue I cannot reproduce. I really cannot help any further without any log.
do not worry maybe I'll rush with the comment .. I apologize is very possible that I did not keep a lot of time with patience in solving that error .. but if it is not a problem that mine the subject is frazzled ... once more congratulations
Thanks for this ROM
Sent from my Redmi Note 4 using Tapatalk
Is IR Blaster working in this rom?
Stban0626 said:
Is IR Blaster working in this rom?
Click to expand...
Click to collapse
It should but I dont have a suitable target to test. Can you test and report if it is not working ?
Update!!!
https://androidfilehost.com/?fid=818070582850490880
screwd-mido-4.1.0-UNOFFICIAL-20180206-1611
Sent from my Redmi Note 4 using Tapatalk
febry_valdy said:
Update!!!
https://androidfilehost.com/?fid=818070582850490880
screwd-mido-4.1.0-UNOFFICIAL-20180206-1611
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
Changelog?
febry_valdy said:
update!!!
https://androidfilehost.com/?fid=818070582850490880
screwd-mido-4.1.0-unofficial-20180206-1611
sent from my redmi note 4 using tapatalk
Click to expand...
Click to collapse
thats a test build......when theres a release build i will post it here........you will notice that this build is not in the public release folder.....
N.B : well...xda not allowing me to use all-caps but ya, I am shouting at you
AOSPA Extended
#Be Extended
Code:
/*
* Your warranty is now void?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Just sharing a personal build here. This started(and ended) with nougat OnePlus 3/3t. Due to the lack of custom ROMs that could fulfill my specific needs, I decided to revive AOSPA-Extended and here we are (after fixing haptics and stuff). The features included are things that I find necessary personally. By no means, you are to compare this ROM to any other ROM(even AOSPA). The awesome optimization and extreme hard work done by the AOSPA team is why this has been possible.
Here is the list of additional tweaks/additions:: (not up-to-date)
- In-call vibration haptics
- Statusbar network traffic
- MicroG support
- QS tiles haptics
- QS tile padding adjustments
- QS column and row configurable
- Alert slider haptics improvements
- Added Caffeine, heads-up and Reboot tiles
- Added Battery Stats reset option
- Unlink ring and notification volume
- Better haptics
- Ringtone and notification vibration intensity
Please note that this ROM is based on OSS vendor.
Download Link::
Get the latest build SourceForge
Make sure this device runs under MIUI firmware 12.x.x before flashing the ROM package. It is advisable to flash the full fastboot MIUI v12.x.x ROM for your region if you are switching from an MIUI vendor based ROM to this ROM(OSS vendor based).
Install Instructions::
- Wipe data, cache, dalvik
- Flash ROM package
- Flash GApps (nano only)
- Flash Magisk (optional)
- Flash DFE (optional: if decrypted)
- Reboot into system.
ROM Source: https://github.com/AOSPA & https://github.com/ritujb
Kernel Source: https://github.com/aospa/android_kernel_xiaomi_sm8150 branch quartz-raphael
Join the telegram group [url]https://t.me/joinchat/OBPVtFGtMrioYpUtTPVfWg[/URL]
XDA:DevDB Information
AOSPA-Extended, ROM for the Redmi K20 Pro
Contributors
rituj_b
Source Code: https://github.com/ritujb
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: 12.x.x firmware
Based On: Paranoid Android
Version Information
Status: Stable
Stable Release Date: 2020-03-31
Created 2020-03-29
Last Updated 2020-09-21
Changelogs
Changelog for 21/09/2020 build:
Code:
1) September security patch
2) Upstream merges
3) EOL build for Q
4) New CAF TAG
5) Switch to immensity kernel(battery life fixed)
Changelog for 30/08/2020 build:
Code:
1) August security patch
2) Upstream merges
3) Fix deep sleep issue
4) New CAF TAG
5) Fix WiFi Calling
6) Fix double status bar issue when pulling quick settings
7) Fix wired headset gesture keycodes
Changelog for 09/08/2020 build:
Code:
1) August security patch
2) Applock bug fixes
3) Lockscreen weather
4) Smart charging support
5) Don't light up notif led when the camera is out
6) Fix low mic volume on VOIP calls when using wired headset
Changelog for 27/07/2020 build:
Code:
1) Introduce automated DC Dimming
2) Add per-app notification control in applock settings
3) Fix FOD not working when PIP window is showing (applock)
4) New "prevent ringing" gesture (power + volume-up) to cycle through ringer modes
5) Better microG support (permissions issue fixed)
6) Fix glitchy ringer and notif volume bar when switching modes
7) Smoothly fade-out FOD view
8) Let legacy apps scale fully to the display's aspect ratio
9) Run automatic night light and dark mode switching even when location is not enabled (9pm to 5am)
10) Update blobs to MIUI 12 (Make sure you use 12.x.x few)
11) Add support for notification LED
Changelog for 10/07/2020 build:
Code:
1) Fix SystemUI crash on switching to silent mode
2) Fix volume getting stuck bug
Changelog for 09/07/2020 build:
Code:
1) App lock improvements
2) PA source sync
3) Added FOD animation
4) Allow disabling screenshot sound
5) Add settings for VoLTE and VoWiFi icon
6) Add support for AudioPlaybackCapture
7) Grey out FOD view when the fingerprint is not trusted
8) Add option to swipe up on keyguard to use Face Unlock
9) July security patch
10) Switch to f1xy kernel
11) Fix Amazon Prime HD video on Indian devices
12) Fix GCAM crash
Changelog for 25/06/2020 build:
Code:
1) App lock improvements
2) PA source sync
3) Switch to bottom panels for quick toggles
4) Lockscreen charging info
5) Volume panel UI changes
6) Don't disable offscreen gestures while in call or ringing
7) Good ol' circle battery style
Changelog for 21/05/2020 build:
Code:
1) Lockscreen pin/pattern view bug fixes
2) Rework App lock
3) May security patch
4) Switch to LA.UM.8.13.r1-08200-SAIPAN.0 tag
5) BiometricPrompt dialog layout adjustments
6) Fix QS security footer layout
7) Fix QS tiles left and right padding
8) Switch to F1XY kernel
Changelog for 30/04/2020 build:
Code:
1) Rework brightness slider implementation (move to bottom)
2) App locker (alpha stage)
3) Fixed HDR
4) Add Face unlock
5) Merge QPR2 tag
6) Bump to quartz 3
7) latest CAF tag merged
8) Many more bug fixes
Changelog for 14/04/2020 build:
Code:
1) Remove GAPPS
2) Source upstream
Changelog for 12/04/2020 build:
Code:
1) Brightness slider UI tweaks
2) Enable force encryption by default
3) Selinux Enforcing now, Safety net passes
4) ANX cam support added (v175 works fine)
5) Fix video recording bug
6) Add navigation gesture full screen toggle
7) Add support for changing back gesture height in gestural navigation mode
8) switch to latest immensity kernel
9) SQLite database improvements (at least 50% improvements)
10) Switch to user build (Clean flash recommended)
11) April security patch
12) Screen recorder added
13) Many more bug fixes
Changelog for 31/03/2020 build:
Code:
1) Move brightness slider down
2) Add auto brightness button
3) Switch to f1xy kernel
4) Add wake to ambient display gesture
5) Add power button torch gesture
6) Update FOD icon
7) Lot's of performance improvements
Reserved
is firmware fw_raphael_miui_RAPHAEL_V11.0.7.0.QFKCNXM_4a6b851d43_10.0.zip the same as vendor file?
Currently i'm on RAPHAELGlobal-V11.0.3.0.QFKMIXM-10.0-vendor-firmware... must i flash the above file?
tugas2khas said:
is firmware fw_raphael_miui_RAPHAEL_V11.0.7.0.QFKCNXM_4a6b851d43_10.0.zip the same as vendor file?
Currently i'm on RAPHAELGlobal-V11.0.3.0.QFKMIXM-10.0-vendor-firmware... must i flash the above file?
Click to expand...
Click to collapse
Yes. You must flash.
Any screenshots?
rituj_b said:
Yes. You must flash.
Click to expand...
Click to collapse
Is this really ok because i read that it's not Safe to mix firmware and vendor from another variety of phone(I mean ,if you have global you must use global and if you use Chinese you must use Chinese) ? Sorry for my English!
I glad to see you here!I remember you from the OnePlus section!
Sent from my Xiaomi Mi 9T Pro using XDA Labs
Thanks Dev
It's interesting
But we can't use bigger gapps ?
anx cam work?
OMG AOSPA extended was my favorite ROM on OP3
xarrismoto said:
Is this really ok because i read that it's not Safe to mix firmware and vendor from another variety of phone(I mean ,if you have global you must use global and if you use Chinese you must use Chinese) ? Sorry for my English!
I glad to see you here!I remember you from the OnePlus section!
Sent from my Xiaomi Mi 9T Pro using XDA Labs
Click to expand...
Click to collapse
Your specify it must be the Chinese seller. It brings doubts to those of us who use the USA. USA Wait for a response if there is no problem installing the ROM
xarrismoto said:
Is this really ok because i read that it's not Safe to mix firmware and vendor from another variety of phone(I mean ,if you have global you must use global and if you use Chinese you must use Chinese) ? Sorry for my English!
I glad to see you here!I remember you from the OnePlus section!
Click to expand...
Click to collapse
Yes you can. It is only firmware zip and the rom includes the vendor.
fereidooni said:
Thanks Dev
It's interesting
But we can't use bigger gapps ?
Click to expand...
Click to collapse
You can use. But nothing smaller than Nano.
What kernel is the base? There are very noticable frame drops every now and then.
And could you please move the brightness slider down? I just have normal sized hands, and there is no way to reach the top with one hand. Thanks
and also the SQLite performance is over 2x as slow as syberia OS. Would it be possible to adopts syberias solution ?
other than the framedrops, the ROM feels alright.
Thanks a lot for bringing AOSPA extended to 9T Pro:highfive:
No VoWiFi...
with f1xy kernel the frame drops disappeared
Great ROM! I'm happy to report that android auto works for me on this rom
So even though I have it installed just today, you can already feel the optimized perf of PA (if you change the kernel for now because of immensitys kernel UI lags in this version, which seems to be the base for PA)
Just flies through everything I through at it where other ROMs would start to slow down. Only syberia would come as 2nd place, and all the rest on 3rd.
I thing immensity dev will fix the UI lag issues, so our PA Extended will also include it in next update
The only things which are left on my wish list:
-SQLite tuning from syberia
-Brightness slider on bottom of QS
-long press flashlight when screen off
-and maybe screen OFF FOD like syberia (an PE should have it too I've heard)
But for now thank you @ dev :victory:
New Update!!
Changlelog for 31/03/2020 build:
Code:
1) Move brightness slider down
2) Add auto brightness button
3) Switch to f1xy kernel
4) Add wake to ambient display gesture
5) Add power button torch gesture
6) Update FOD icon
7) Lot's of performance improvements
Download links updated in OP
rituj_b said:
Changlelog for 31/03/2020 build:
Download links updated in OP
Click to expand...
Click to collapse
The file size is 32 kb
---------- Post added at 09:28 AM ---------- Previous post was at 08:46 AM ----------
rituj_b said:
Changlelog for 31/03/2020 build:
Download links updated in OP
Click to expand...
Click to collapse
Sir you have to change dtbo because of fixy kernel
Rom not booted now it's a known issue
I flashed dtbo from 11.0.4 vendor and rom booted
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About
CrDroid for UMIDIGI A5 Pro, with things that mostly work as expected. This ROM depends on the official image of the vendor, so make sure you are using the latest official build before installing this ROM on your device. Also, since these MTK devices often have a few odd variations, be aware that your crdroid may be different.
Join my telegram channel to get latest updates
UMIDIGI A5 Pro Updates
Whats working?
Boots
RIL (Calls, SMS, Data)
Wi-Fi
Access point
Bluetooth
Video Playback
Audio
Sensors
Flash
GPS
Fingerprint
Camera
Offline charging.
Known Issues?
Call volume
Links
CrDroid - Download
OpenGApps - Download
TWRP - Download
PBRP - Download
Magisk - Download
Installation
Be sure to be on the latest stock firmware! Everything was tested based on the firmware: UMIDIGI_A5_Pro_V2.0_20210326
Wipe->Wipe Data->yes
Wipe->Advanced Wipe->Wipe System,Cache
Reboot Recovery
Install Zip->SD Card->CrDroid-A5_Pro-Unofficial.zip
Install Zip->SD Card->open_gapps-arm64-11.0-nano.zip
Install Zip->SD Card->Magisk.zip
XDAevDB Information
Lineage OS, ROM for the UMIDIGI A5 Pro/breeze
Contributors
Hadenix
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
Based On: Lineage OS
Version Information
Status: Beta
Build Date - 14.04.2021
CHANGELOG:
- Source update, welcome version 7.5
- Gboard: remove spacing on navigation bar
- Add HotwordEnrollment support from Begoniain Q
- Fix Ok Google (you need OpenGApps Nano to work)
- Disable unspecialized app process pool (Zygote hooks doesn't work properly with USAP enabled)
- update prebuild kernel from stock ROM V2.0 20210326
Build Date - 09.04.2021
CHANGELOG:
- added CTS on R (test)
- Workaround SafetyNet check
- Did a test with "enforce selinux", the system booted but incoming calls did not work. returned "permissive". there will be time to watch later. at the moment, so!
- Update build fingerprint to redfin 2021-04-05
- ZRAM: take values from stock ROM
- Returned the old path for solution for incoming calls
- Set correct bootloader board name (Mediatek devices usually set bootloader board name via ro.product.board on /vendor/build.prop)
- Sorting partitions in fstab
Build Date - 05.04.2021
CHANGELOG:
- Solution for incoming calls (Hex edited)
- Remove rild.libpath and rild.libargs props (These are defaults in mtk ril daemon)
- Force enable VoLTE and VoWifi / Disable ViLTE
- Toggle airplane mode on and off on boot (This hack needs ImsInit commit to request ims on boot to work properly)
- Update networkAttributes
- Add modified treble app (IMS)
- Add WifiOverlay and TetheringConfigOverlay
- Enable gestural navigation by default
- Disable serial console notification
- Fstab V1.9_20210226
- Expand PRODUCT_DEXPREOPT_SPEED_APPS list
- Update audio XML
- Update shims for R
- Add auto brightness option
- Address rild denials for IMS
- Add permissions for lock screen
- AptX from begonia
- Permissions for mediatek IMS
- Use Prebuild APNS Config
- Build AOSP RCS packages
- Build libhidltransport/libhwbinder (Needed for old blobs)
- Add Camera Privapp List
- Adapt MTK offline charging for R
- Set display DPI to 420
- fix SELinux crashes
- Add a new list of pinned file for the JIT in zygote
- Add biometric sensor overlay
- Turn on MAC Randomization
- Kang brightness overlays
- Update kernel from V1.9_20210226
- Update pinned (Pixel 5)
- Import of IDC and Keylayout
- Hi, Android 11
Build Date - 23.04.2021
CHANGELOG:
- clear Camera AUX Package List
- remove WifiOverlay
- enable support for third party location providers
- enable proximity check on awakening
- disable NearbyMessagingService and DiscoveryService (Affects Wi-Fi speed and stability)
- Snap: enable camera api v2
- enable additional camera for Snap (bokeh)
- specify the number of supported cameras
- declare support for STATE_DOZE
- overlay: cleaning, sorting
- use vibration patterns from Pixel 2
- enable display burnout protection in Ambient Display
- enable AOD (And disable by default)
- added config_dozeComponent
- volume index for music stream to limit headphone volume and display warning
- pin: CameraApp and HomeApp
- updating libraries
- Camera shutter sound enabled (country dependent)
- removed the config setting swipe up gestures (it was relevant for android 9, now we are doing the 11th and we no longer need it)
- Shutdown if the battery temperature exceeds (this value * 0.1) Celsius
- updated list of default files pinned by Pinner
- updated the list of files pinned by the Pinner service with the JIT Zygote boot image
- updated network attributes
- updated configs overlay brightness
- enable call recording
- disable Bluetooth in the setup wizard
Build Date - 26.04.2021
CHANGELOG:
- CrDroid source update
- Add WifiOverlay
- Sepolicy: fix video crashing in apps targeting Android R
- Do not sign RRO Wi-Fi with platform certificate
- Update config_tether_wifi_regexs
- Change package name TetheringOverlay
- Use patchelf instead of LD_SHIM_LIBS
- Drop USE_XML_AUDIO_POLICY_CONF (only used on QCOM audio HAL)
- Hotspot fix
The system has an extremely illuminated display for black background. Increased battery consumption.
StaryMuz said:
The system has an extremely illuminated display for black background. Increased battery consumption.
Click to expand...
Click to collapse
did not quite understand you!
Build Date - 02.05.2021
CHANGELOG DEVICE:
- remove PRODUCT_DEXPREOPT_SPEED_APPS for SystemUI
- overlay: disable MAC randomization
CHANGELOG ROM:
====================
05-02-2021
====================
* external/asus/stitchimage
9bf8a6f Remove Firebase from prebuilt manifest
* frameworks/base
7a53a0846ba SystemUI: Do not change interrupt state for heads up
e1aade6183f SystemUI: Fix Ticker layout
68d7ac60851 Status bar notification ticker [1/2]
216ba939c13 Clipboard access toast: Improvements [1/2]
93f1139a61a base: clipboard toast toggle [1/2]
45b8b764305 base: iOS-like toast notification for clipboard access
37c4781493b Fix two problems in the ExecuteBinary function.
0d0ae0e19a2 Merge pull request #652 from mukesh22584/11.0
7f77595a3ce SystemUI: Add crDroid Light FOD icon [1/2]
* packages/apps/Launcher3
020cb00e0 Merge pull request #144 from mg712702/11.0
5ab0eb9ec SystemShortcuts: fix fc with InfoBottomSheet
* packages/apps/crDroidSettings
f3c4a99c Status bar notification ticker [2/2]
7260c97f Clipboard access toast: Improvements [2/2]
71eb3086 Merge pull request #755 from mukesh22584/11.0
5c374d82 crDroidSettings: Remove unused & duplicate FOD icons
57186eed crDroidSettings: Add crDroid light FOD icon [2/2]
====================
05-01-2021
====================
* build/make
a957ba59b Merge pull request #29 from GtrCraft/11.0
* packages/apps/Jelly
16e5ac7 Jelly: Add support for viewable content:// scheme
47ad959 Jelly: Start using OpenMultipleDocuments for FileShower
* packages/apps/Launcher3
f74a1c4b4 Merge pull request #143 from DarkJoker360/11.0
30ed0bb8c Launcher3: Fix duplicate attributes
* vendor/lineage
9feaf814 vendor: apns: Add Ting
====================
04-30-2021
====================
* frameworks/base
88027b819ed New translations (#650)
* packages/apps/crDroidSettings
e8fd71c9 New Crowdin updates (#751)
====================
04-29-2021
====================
* art
2d274fc6be Fix inliner instruction/register limits
* frameworks/base
b640d2fd7df fix INTERNET enforcement for secondary users
b8f98942bae Add notification guts priority button background opacity
6ee31ac340e Add toggle to disable charging animation [1/2]
* packages/apps/crDroidSettings
ef127206 Add toggle to disable charging animation [2/2]
====================
04-28-2021
====================
* frameworks/base
62ecee88423 Do not show charging animation when disconnecting
67decf26794 base: Use wireless charging animation for wired charging too
9ec2c5e9abd Fix notification guts and header opacity
* packages/apps/Settings
cbe81eaa1f Merge pull request #100 from mukesh22584/11.0
ca8a8f2221 Settings: Add preference for maximum screen refresh rate
ee53de5fe2 Settings: Allow devices to provide their own color mode strings
* vendor/lineage
df7a2533 Revert "config: Set UM 4.4 family as QSSI supported platform"
====================
04-27-2021
====================
* frameworks/base
18a84d3e26c Fix up notification opacity with animation
4ac4546425e New Crowdin updates (#646)
9d3e7ee3e25 Fix up alpha scale for notification image view
* packages/apps/crDroidSettings
bdb7ea7c New Crowdin updates (#748)
The basic backlight of the display is strong. Even cleanly black screen is too shining.
StaryMuz said:
The basic backlight of the display is strong. Even cleanly black screen is too shining.
Click to expand...
Click to collapse
I agree with you, but there is nothing I can do about it. we have such a screen
Hadenix said:
About
CrDroid for UMIDIGI A5 Pro, with things that mostly work as expected. This ROM depends on the official image of the vendor, so make sure you are using the latest official build before installing this ROM on your device. Also, since these MTK devices often have a few odd variations, be aware that your crdroid may be different.
Join my telegram channel to get latest updates
UMIDIGI A5 Pro Updates
Whats working?
Boots
RIL (Calls, SMS, Data)
Wi-Fi
Access point
Bluetooth
Video Playback
Audio
Sensors
Flash
GPS
Fingerprint
Camera
Offline charging.
Known Issues?
Call volume
Links
CrDroid - Download
OpenGApps - Download
TWRP - Download
PBRP - Download
Magisk - Download
Installation
Be sure to be on the latest stock firmware! Everything was tested based on the firmware: UMIDIGI_A5_Pro_V2.0_20210326
Wipe->Wipe Data->yes
Wipe->Advanced Wipe->Wipe System,Cache
Reboot Recovery
Install Zip->SD Card->CrDroid-A5_Pro-Unofficial.zip
Install Zip->SD Card->open_gapps-arm64-11.0-nano.zip
Install Zip->SD Card->Magisk.zip
XDAevDB Information
Lineage OS, ROM for the UMIDIGI A5 Pro/breeze
Contributors
Hadenix
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
Based On: Lineage OS
Version Information
Status: Beta
Click to expand...
Click to collapse
Nice rom you have the trees? i want to compile too
How to place the virtual buttons? (Solved)
I'm using my wife's smartphone for everyday use. Working very well, I did not find any bug, unless sometimes the touch stops responding and then it is necessary to press the power button to lock and unlock and return to normal. But I was already having this bug with the original rom.
Yukki159_ said:
Nice rom you have the trees? i want to compile too
Click to expand...
Click to collapse
umidigi-mt6763
Sources for MT6763 mobile platform. umidigi-mt6763 has 10 repositories available. Follow their code on GitHub.
github.com
Hello. thanks for the rom!!
Just a question if ever you have a solution to my problem, after i install your rom it works fine i do like it.
Just that the previous games i was playing, i cant install it from google play store and some other similar store i tried multiple times checked my connection, uninstall update, clear storage, format etc but the problem still persist ..
//Not all of my games, 2 out of 3 were unable to install to my phone
if you or anyone have a solution i will appreciate it if you share it to me, thanks in advance!!
Fixed by deleting migrate-legacy-data-obb.sh using twrp.
How?
Go to TWRP
>Advance
>File Manager
>System folder
>bin folder
>look for migrate-legacy-data-obb.sh or migrate-legacy-obb-data.sh
>Delete and reboot
If you don't see system folder, mount it first!
Credits to the telegram group, most issue fix can be found there!
All worked fine until the rom installation.
Getting an error that the rom is not compatible with a5 pro eu .
is there a rom that is compatible with a5 pro e
Hadenix said:
About
CrDroid for UMIDIGI A5 Pro, with things that mostly work as expected. This ROM depends on the official image of the vendor, so make sure you are using the latest official build before installing this ROM on your device. Also, since these MTK devices often have a few odd variations, be aware that your crdroid may be different.
Join my telegram channel to get latest updates
UMIDIGI A5 Pro Updates
Whats working?
Boots
RIL (Calls, SMS, Data)
Wi-Fi
Access point
Bluetooth
Video Playback
Audio
Sensors
Flash
GPS
Fingerprint
Camera
Offline charging.
Known Issues?
Call volume
Links
CrDroid - Download
OpenGApps - Download
TWRP - Download
PBRP - Download
Magisk - Download
Installation
Be sure to be on the latest stock firmware! Everything was tested based on the firmware: UMIDIGI_A5_Pro_V2.0_20210326
Wipe->Wipe Data->yes
Wipe->Advanced Wipe->Wipe System,Cache
Reboot Recovery
Install Zip->SD Card->CrDroid-A5_Pro-Unofficial.zip
Install Zip->SD Card->open_gapps-arm64-11.0-nano.zip
Install Zip->SD Card->Magisk.zip
XDAevDB Information
Lineage OS, ROM for the UMIDIGI A5 Pro/breeze
Contributors
Hadenix
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
Based On: Lineage OS
Version Information
Status: Beta
Click to expand...
Click to collapse
Thank you for the information Hadenix. As much as I would like to upgrade my umidigi a5 pro to android 11, I'm afraid that I might not make it till the end. Would it be possible to provide a step by step tutorial on how to upgrade to android 11 as I am a newbie. Hoping for your help. Thank you
Reeyster said:
Hello. thanks for the rom!!
Just a question if ever you have a solution to my problem, after i install your rom it works fine i do like it.
Just that the previous games i was playing, i cant install it from google play store and some other similar store i tried multiple times checked my connection, uninstall update, clear storage, format etc but the problem still persist ..
//Not all of my games, 2 out of 3 were unable to install to my phone
if you or anyone have a solution i will appreciate it if you share it to me, thanks in advance!!
Fixed by deleting migrate-legacy-data-obb.sh using twrp.
How?
Go to TWRP
>Advance
>File Manager
>System folder
>bin folder
>look for migrate-legacy-data-obb.sh or migrate-legacy-obb-data.sh
>Delete and reboot
If you don't see system folder, mount it first!
Credits to the telegram group, most issue fix can be found there!
Click to expand...
Click to collapse
May I know the telegram group name?
Merftj said:
How to place the virtual buttons? (Solved)
I'm using my wife's smartphone for everyday use. Working very well, I did not find any bug, unless sometimes the touch stops responding and then it is necessary to press the power button to lock and unlock and return to normal. But I was already having this bug with the original rom.
Click to expand...
Click to collapse
i have the same problem, my touchscreen goes unresponsive often and i have to tap power button twice to make it react ... how did you solve it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Evolution X 6.0 for the Xiaomi Redmi Note 7 Pro [violet]
Code:
/*
* Your warranty is void. Or vaild, probably?
*
* I am not responsible for bricked devices, dead SD cards, Ebolation X,
* thermonuclear war, or the current economic crisis caused by you following
* these directions. YOU are choosing to make these modificiations, and if
* you point your finger at me for messing up your device, I will LMAO at you.
*/
Living, Breaking, Keep Evolving.
Pixel UI, customization and more, we are Evolution X!
- Team Evolution X -
@joeyhuab
@peaktogoo (Now RealAkito)
Reach us on Twitter! @EvolutionXROM
What are our features?
- Just flash and check "The Evolver"
You tell me
DO NOT FLASH GAPPS, ALREADY INCLUDED
DO NOT FLASH GAPPS, ALREADY INCLUDED
First Time Install / Clean Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Wipe Data/Cache/System
4. Format Data (Optional)
5. Flash the ROM
6. Reboot to System
7. Reboot to Recovery (Optional)
8. Flash Magisk (Optional)
9. Reboot to System and #KeepEvolving
Update / Dirty Flash
1. Reboot to Recovery
2. Download the proper flashable ZIP for your device
3. Reboot to Recovery (Optional)
4. Flash Magisk (Optional)
5. Flash the ROM
6. Reboot to System and #KeepEvolving
Light Screenshots / Dark Screenshots / Download
Donate to me! / Official Chat / Device Support
Android OS version: 12.0
Security patch level: November 2021
Build Author: Mir Yasin Ali
Source Code: https://github.com/Evolution-X
Kernel Source Code: https://github.com/Panchajanya1999/msm-4.14
ROM Developer: joeyhuab
EvolutionX 6.0 Android 12 | Snow|
Note: Rom is decrypted by default
Encrypted users have to format data to flash this build because encrytion is broken for now in A12 violet
Recommended OrangeFox A12 recovery(Unofficial one)
==============================
Flashing Steps
==============================
Wipe cache,dalvik cache,system,vendor,data
Flash rom
Reboot
Device changes:
==============================
None
------------------------------
ROM changes:
==============================
Initial Android 12 Release
can i have some screen shots of the os
what kernel is used
Rathnam S said:
what kernel is used
Click to expand...
Click to collapse
Xcalibur +
Rathnam S said:
can i have some screen shots of the os
Click to expand...
Click to collapse
u can see ss at https://t.me/EvolutionXViolet/305095
You're working on an update?
Call recording is available or not
Merry Christmas guys enjoy the christmas with new EvolutionX update
Download:- https://sourceforge.net/projects/ev...-ota-sq1d.211205.016.a1-12240707.zip/download
Changelog and notes
Notes:
Rom is decrypted by default
You need to format data for this build because of F2FS compression and upstream stuffs from panchajanya1999 sir
No format data, No support
Flashing steps:
Wipe cache, dalvik cache, system, data, vendor
Flash Rom
Format data
Reboot
Enjoy your christmas with EvolutionX violet update
This build you're receiving is evolution_violet-ota-sq1d.211205.016.a1-12240707.zip.
Changes:
Latest Evolution X source changes
Updated Blobs of gps, Alaram, Time, DSP, QMI, CNE, Radio, ImsRadio
Updated Azure kernel to latest
Added back Dirac and FPS Info
Tuned vibration
Added RGB color mode
Added neural networks
Added notch bar killer
Improved perfomance and stability
Addressed some logspams
Fixed offline charging animation
I was wondering if there is a support for OTA?
Princ87 said:
Merry Christmas guys enjoy the christmas with new EvolutionX update
Download:- https://sourceforge.net/projects/ev...-ota-sq1d.211205.016.a1-12240707.zip/download
Changelog and notes
Notes:
Rom is decrypted by default
You need to format data for this build because of F2FS compression and upstream stuffs from panchajanya1999 sir
No format data, No support
Flashing steps:
Wipe cache, dalvik cache, system, data, vendor
Flash Rom
Format data
Reboot
Enjoy your christmas with EvolutionX violet update
This build you're receiving is evolution_violet-ota-sq1d.211205.016.a1-12240707.zip.
Changes:
Latest Evolution X source changes
Updated Blobs of gps, Alaram, Time, DSP, QMI, CNE, Radio, ImsRadio
Updated Azure kernel to latest
Added back Dirac and FPS Info
Tuned vibration
Added RGB color mode
Added neural networks
Added notch bar killer
Improved perfomance and stability
Addressed some logspams
Fixed offline charging animation
Click to expand...
Click to collapse
after i flashed this rom
1. battery drain too fast，there are always 6 cores at least 1209mhz。in "devcheck" app, frequency 1209MHz-1708MHz
652MHz-2016MHz， this is not the same as your rom “evolution x 5.9 Android 11”
2.on lock screen ，menu bar can be active ，i can't find a way to set it not active.
3.on lock screen， three is a very big digital clock on it， can't find a way to set it.
Princ87 said:
Merry Christmas guys enjoy the christmas with new EvolutionX update
Download:- https://sourceforge.net/projects/ev...-ota-sq1d.211205.016.a1-12240707.zip/download
Changelog and notes
Notes:
Rom is decrypted by default
You need to format data for this build because of F2FS compression and upstream stuffs from panchajanya1999 sir
No format data, No support
Flashing steps:
Wipe cache, dalvik cache, system, data, vendor
Flash Rom
Format data
Reboot
Enjoy your christmas with EvolutionX violet update
This build you're receiving is evolution_violet-ota-sq1d.211205.016.a1-12240707.zip.
Changes:
Latest Evolution X source changes
Updated Blobs of gps, Alaram, Time, DSP, QMI, CNE, Radio, ImsRadio
Updated Azure kernel to latest
Added back Dirac and FPS Info
Tuned vibration
Added RGB color mode
Added neural networks
Added notch bar killer
Improved perfomance and stability
Addressed some logspams
Fixed offline charging animation
Click to expand...
Click to collapse
Gps doesn't work after update
Dyingzombie said:
after i flashed this rom
1. battery drain too fast，there are always 6 cores at least 1209mhz。in "devcheck" app, frequency 1209MHz-1708MHz
652MHz-2016MHz， this is not the same as your rom “evolution x 5.9 Android 11”
2.on lock screen ，menu bar can be active ，i can't find a way to set it not active.
3.on lock screen， three is a very big digital clock on it， can't find a way to set it.
Click to expand...
Click to collapse
4. can't find storage on computer when connect to usb,also can't transfer data
Dyingzombie said:
4. can't find storage on computer when connect to usb,also can't transfer data
Click to expand...
Click to collapse
cuz u didn't changed the setting form use this phone to charge this phone when usb is connected to tranfer files option lol
CherrugDeveloper said:
Gps doesn't work after update
Click to expand...
Click to collapse
lol
New Update is up!
Download Link :- https://sourceforge.net/projects/ev...let-ota-sq1d.220105.007-01271407.zip/download
Notes:
Gapps are prebuilt
Rom is now encrypted by default
Since Rom has AOSP Recovery as default but it may not be replaced so flash it manually(Blame Orange fox)
If you want to remain decrypted then flash Fcryptdisabler v3 after ROM zip.
Changelogs
Latest Evolution X source changes
Default Kernel is Xcalibur+
Added Quick Tap
Import Google changes on DEC7 Volume
Fixed Encryption
Fixed a distrubing sound at very low volume(Wired Earphones)
Boost audio output a bit
Improved perfomance and stability
Flashing Steps To Get Encrypted
Flash AOSP RECOVERY
Reboot to recovery, if it shows "No Command", press Power and Volume Up (Or see this Video
Apply update via ADB, then flash the Rom
Format data by going inside wipe data/factory reset option
Reboot
In the next update, OTA will work?
Flash it from recovery manully for now
amnher said:
In the next update, OTA will work
Click to expand...
Click to collapse
Flash it from recovery manully for now
New Update is up guys!
Download: https://sourceforge.net/projects/ev...let-ota-sq1d.220205.003-02111932.zip/download
Notes:
Gapps are prebuilt
Rom is encrypted by default
Since Rom has AOSP Recovery as default but it may not be replaced so flash it manually(Blame Orange fox)
If you want to remain decrypted then flash Fcryptdisabler v3 after ROM zip.
ChangelogsDevice changes:
==============================
Hotfix build for encrypted users
Disabled Mobile plan setting
Disabled the force stop warning shown in setup wizard
Fixed carrier video calling
------------------------------
ROM changes:
==============================
Backport 'Add ability to disable GL draws'
Cancel the existing recents animation before any initialization
Evolver: Implement cutout force fullscreen
Fix BatteryStats counts foreground activity time
Fix NPE with cutout force full screen
Fix an instance of -Wunused-but-set-variable
Fix full draw power usage increase issue
HwRemoteBinder: fix race for concurrent binderDied
Lazy load Properties::isDrawingEnabled
QSTiles: Re-write Caffeine tile in Kotlin
QSTiles: Re-write On-The-Go tile in Kotlin
QSTiles: Re-write Sync tile in Kotlin
Settings: Add activity for cutout force fullscreen
Settings: Migrate encryption settings xml to NestedScrollView
Settings: Migrate interstitial encryption settings xml to NestedScrollView
Settings: Move Extra Dim feature to Display
Settings: Support per-app volume
Settings: Use List Preference for Dark mode
SystemUI: Make center clock layout safe insets aware
SystemUI: Make center clock shift with rest of the status bar items
Update some translations
base: Remove duplicate WRITE_APN_SETTINGS permission for SystemUI
fixup! SystemUI: On-The-Go Mode
ColorBucket: Remove PitchBlack overlays (different from the ‘real’ Black theme)
EasterEgg: Fix some warnings
Evolver: Add user toggle for streaming apps
Settings: Turn on haptic feedback on back gesture by default
StrictMode: Don't enable extra features for userdebug builds
SystemUI: Display a toast when a screenshot is deleted
SystemUI: MediaOutputDialogFactory: Accept null package name
SystemUI: Remove excess margin from data saver icon
gms: Add Pixel dependencies sysconfigs (for specific Pixel devices only)
init: Set persist.sys.usb.config properly
vendor: Hide blank preference in Settings > Accessibility
vendor: Set persist.sys.usb.config conditionally
Flashing Steps To Get Encrypted
Flash AOSP Recovery(Given in Release Post)
Reboot to recovery, if it shows "No Command", press Power and Volume Up (Or see this Video
Apply update via ADB, then flash the Rom
Format data by going inside wipe data/factory reset option
Reboot
Flashing Steps for dirty flash(Encrypted Users)
Flash AOSP Recovery(Given in Release Post)
Reboot to recovery, if it shows "No Command", press Power and Volume Up (Or see this Video
Apply update via ADB, then flash the Rom
Reboot
OR YOU CAN JUST USE OTA_FLASHER GIVEN IN DEVICE GROUP NOTES.