Hi all,
I have visited this forum for some time and always found helpful information.
But this time I messed up this android phone and don't know how to fix it.
Late at night I was flashing custom roms to Motorola XT1032 and couple of other aps, I do it on CWM recovery using adb, so I where operating as root inside of device, had mounted all partition in Read and Write permissions.
Then when I finished applying custom stuff I wanted to delete not needed stuff what I put in /data/local/tmp. At this moment I thougt I am in this path, but I where in / and made "rm * " .
A second later I realized my mistake but that was to late.
Since that I tried to flash custom roms but that did not help to make wifi working again.
After flashing custom roms like ClockworkMod phone is working, mobile reception and bluetooth but no wifi.
I tried to insmod /system/lib/modules/wlan.ko but I got "insmod: init_module '/system/lib/modules/wlan.ko' failed (Operation not permitted)"
I think that need to flash rootfs but not 100% sure and I don't have copy of it.
Please help me.
Chris
I have the exact same problem and I have no idea how to fix it.
Chris.G said:
Hi all,
I have visited this forum for some time and always found helpful information.
But this time I messed up this android phone and don't know how to fix it.
Late at night I was flashing custom roms to Motorola XT1032 and couple of other aps, I do it on CWM recovery using adb, so I where operating as root inside of device, had mounted all partition in Read and Write permissions.
Then when I finished applying custom stuff I wanted to delete not needed stuff what I put in /data/local/tmp. At this moment I thougt I am in this path, but I where in / and made "rm * " .
A second later I realized my mistake but that was to late.
Since that I tried to flash custom roms but that did not help to make wifi working again.
After flashing custom roms like ClockworkMod phone is working, mobile reception and bluetooth but no wifi.
I tried to insmod /system/lib/modules/wlan.ko but I got "insmod: init_module '/system/lib/modules/wlan.ko' failed (Operation not permitted)"
I think that need to flash rootfs but not 100% sure and I don't have copy of it.
Please help me.
Chris
Click to expand...
Click to collapse
Same problem, wifi not active.
The PID are variable.
02-05 16:25:02.055 1049 1060 D WifiService: setWifiEnabled: true pid=9178, uid=1000
02-05 16:25:32.986 9178 9178 I ActivityManager: Timeline: Activity_launch_request id:com.android.settings time:3774476
02-05 16:25:32.987 1049 1061 I ActivityManager: START u0 {act=android.intent.action.MAIN cmp=com.android.settings/.SubSettings (has extras)} from pid 9178
02-05 16:25:33.023 9178 9178 D SubSettings: Launching fragment com.android.settings.wifi.WifiSettings
02-05 16:25:33.112 1049 1106 I ActivityManager: Displayed com.android.settings/.SubSettings: +115ms
02-05 16:25:33.155 9178 9178 I ActivityManager: Timeline: Activity_idle id: [email protected] time:3774645
02-05 16:25:33.457 1049 1106 I ActivityManager: Timeline: Activity_windows_visible id: ActivityRecord{41e2f0f8 u0 com.android.settings/.SubSettings t38} time:3774947
02-05 16:26:02.185 1049 1365 D WifiService: setWifiEnabled: true pid=9178, uid=1000
02-05 16:26:13.257 9178 9178 D BluetoothAdapter: 1115700712: getState() : mService = null. Returning STATE_OFF
02-05 16:26:13.309 9178 9178 D BluetoothAdapter: 1115700712: getState() : mService = null. Returning STATE_OFF
02-05 16:26:13.363 9178 9178 I ActivityManager: Timeline: Activity_idle id: [email protected] time:3814853
02-05 16:26:13.714 1049 1106 I ActivityManager: Timeline: Activity_windows_visible id: ActivityRecord{41dd1020 u0 com.android.settings/.Settings t38} time:3815204
02-05 16:26:14.317 1351 1351 I ActivityManager: Timeline: Activity_idle id: [email protected] time:3815806
02-05 16:26:14.688 1049 1106 I ActivityManager: Timeline: Activity_windows_visible id: ActivityRecord{4220d2b0 u0 com.mobint.hololauncher.hd/com.mobint.hololauncher.Launcher t1} time:3816177
02-05 16:26:15.802 1351 1351 I ActivityManager: Timeline: Activity_launch_request id:scd.lcex time:3817291
02-05 16:26:15.803 1049 1061 I ActivityManager: START u0 {act=android.intent.action.MAIN cat=[android.intent.category.LAUNCHER] flg=0x10200000 cmp=scd.lcex/.LogcatExtreme bnds=[257,680][371,878]} from pid 1351
02-05 16:26:16.060 1049 1334 W InputMethodManagerService: Starting input on non-focused client [email protected] (uid=10071 pid=1351)
02-05 16:26:16.094 9393 9393 I ActivityManager: Timeline: Activity_idle id: [email protected] time:3817583
02-05 16:26:16.353 1049 1106 I ActivityManager: Timeline: Activity_windows_visible id: ActivityRecord{41d267a0 u0 scd.lcex/.LogcatExtreme t37} time:3817843
---- 05/02/2014 16:27:23 ----
same probleme
please help us no wifi after unlock bootloader and format systeme, format data, format cache... . I tried rom paranoid, rom cyanogen 11 and rom GPE (google play edition) and same problem no wifi for all systemes. I wait a solution
Same problem
stylboss said:
please help us no wifi after unlock bootloader and format systeme, format data, format cache... . I tried rom paranoid, rom cyanogen 11 and rom GPE (google play edition) and same problem no wifi for all systemes. I wait a solution
Click to expand...
Click to collapse
I got the same problem today i try others roms and wifi is not working. Please some one help us!
Thank you.
SOLVED! SOLUTION WERE- http://forum.xda-developers.com/showthread.php?t=2619553
my moto g XT1033 in stock rom: wifi is not work fine, signal lost every 1 min
but in custom rom work fine!
please help me
Moto G XT1033 WiFi Problem,
hi everyone,
my moto g XT1033 WiFi have not problem with custom ROM but in stock rom WiFi connection lost signal!!!
please help me!
hello guys, can look here, good luck http://forum.xda-developers.com/showthread.php?t=2649763
Problem With WiFi in Stock rom
hello dear,
my moto g xt1033 in stock rom have problem with wifi,connect to wifi and after 5min connection lost< wifi signal is very low, but in custom rom work very good!
I converted my moto g xt1033 to xt1032 and now the wifi does not turn on
After converting, either the wifi does not turn on or after turning it does not display any network. Please help me.
Did you try converting back to xt1033 from xt1032?
Introduction:-
Hello Friends!!Here I present to you Another Awesome Port...Z3 SystemUI For Stock JB 4.2.2...Hope you like it...
Disclaimer:-
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,thermonuclear war, or you getting fired because the alarm app failed!!
*Please make nandroid backup before flashing it as a precaution!
*Try this MOD at your own risk!
Click to expand...
Click to collapse
Features:-
Added Quick Settings Flash Light Toggle
Drag And Drop To Add Or Remove Quick Settings
Added New Animations
Launch What's New Along With Google Now
Improved SuperStamina With New Widget
Added Two Different Versions Of SystemUI
NOTE- DO NOT USE ANY PART OF MY WORK IN ANY ROM OR ANY MOD WITHOUT MY PERMISSION!! IF YOU WANT TO USE, JUST WRITE ME A P.M...
Bugs:-
Flash Light toggle is not switching Off flashlight.
Download Link And Instructions:-
On next Post..
Credits:-
@serajr for precious help...
@kongaz2 for Original Z3 SystemUI...
DON'T FORGET TO HIT THANKS BUTTON!!
Downloads And Instructions
I have Included Two Different Versions of Z3 SystemUI...Both are Flashable Zips..Download Whichever you want...
Downloads:-
Z3 SystemUI Stock Version
Z3 SystemUI Theme Accent Version
For only those who are getting force close when charger is connected...Download this SystemUI - LINK
Instructions:-
Make Sure You're On Deodexed Stock ROM And Superuser MOD Installed.
Download Z3 SystemUI.
Go into CWM Recovery.
Flash Z3 SystemUI Zip.
Wipe Cache and Dalvik-Cache.
Reboot...Done!!:good:
DON'T FORGET TO HIT THANKS BUTTON!!:good::good:
Screenshots
Screenshots:-
STOCK VERSION-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THEME ACCENT VERSION-
DON'T FORGET TO HIT THANKS BUTTON!!:good::good:
Xperia C
Hey bro,,,,can you please port the same z3 system ui for xperia c....
Please bro i need it badly
Samuel Wankhede said:
Hey bro,,,,can you please port the same z3 system ui for xperia c....
Please bro i need it badly
Click to expand...
Click to collapse
Sorry friend..I can't help you..I don't have the device.. And its dual sim phone so it requires lots of changes in SystemUI..
support on xperia m?
Newbie_ID said:
support on xperia m?
Click to expand...
Click to collapse
Try it.. I don't think it'll work coz I specially made it for 4.2.2..But give it a try..
thanks bro,great job.Finally waited.
Superb work dude
Dude, after a few hours of flash it the systemui has stopped, any fix?
SmokinSickStyle said:
Dude, after a few hours of flash it the systemui has stopped, any fix?
Click to expand...
Click to collapse
Please post logcat of the force close..
Same here, system ui has stopped when i connected the charger to the phone
I don't know if this is what you request about the logcat but this is what logcat show me when systemUI Force close
//sorry for my english :silly:
Code:
12-09 21:59:40.744 D/StatusBar.NetworkController(6137): In updateSimIcon simState= READY
12-09 21:59:40.754 D/StatusBar.NetworkController(6137): In updateSimIcon simState= UNKNOWN
12-09 21:59:40.774 D/PhoneStatusBarPolicy(6137): updateSimState for subscription :0
12-09 21:59:43.347 W/InputDispatcher(789): channel '41ca7ca0 StatusBar (server)' ~ Consumer closed input channel or an error occurred. events=0x9
12-09 21:59:43.347 E/InputDispatcher(789): channel '41ca7ca0 StatusBar (server)' ~ Channel is unrecoverably broken and will be disposed!
12-09 21:59:43.357 W/InputDispatcher(789): Attempted to unregister already unregistered input channel '41ca7ca0 StatusBar (server)'
12-09 21:59:43.357 I/WindowState(789): WIN DEATH: Window{41ca7ca0 u0 StatusBar}
12-09 21:59:43.497 D/SystemUIService(6180): loading: class com.android.systemui.statusbar.phone.PhoneStatusBar
12-09 21:59:43.507 D/SystemUIService(6180): running: [email protected]
12-09 21:59:43.527 I/StatusBarManagerService(789): registerStatusBar [email protected]8
12-09 21:59:43.577 D/PhoneStatusBar(6180): mSettingsPanelGravity = 55
12-09 21:59:43.807 D/dalvikvm(6180): DexOpt: couldn't find field Lcom/android/systemui/statusbar/NotificationData$Entry;.row
12-09 21:59:43.807 D/dalvikvm(6180): DexOpt: couldn't find field Lcom/android/systemui/statusbar/NotificationData$Entry;.row
12-09 21:59:43.807 I/dalvikvm(6180): Could not find method com.android.systemui.statusbar.BaseStatusBar.onHeadsUpDismissed, referenced from method com.android.systemui.statusbar.policy.HeadsUpNotificationView.onChildDismissed
12-09 21:59:43.807 W/dalvikvm(6180): VFY: unable to resolve virtual method 2448: Lcom/android/systemui/statusbar/BaseStatusBar;.onHeadsUpDismissed ()V
12-09 21:59:43.807 I/dalvikvm(6180): Could not find method com.android.systemui.statusbar.BaseStatusBar.resetHeadsUpDecayTimer, referenced from method com.android.systemui.statusbar.policy.HeadsUpNotificationView.onTouchEvent
12-09 21:59:43.807 W/dalvikvm(6180): VFY: unable to resolve virtual method 2454: Lcom/android/systemui/statusbar/BaseStatusBar;.resetHeadsUpDecayTimer ()V
12-09 21:59:43.807 D/dalvikvm(6180): DexOpt: couldn't find field Lcom/android/systemui/statusbar/NotificationData$Entry;.row
12-09 21:59:43.807 D/dalvikvm(6180): DexOpt: couldn't find field Lcom/android/systemui/statusbar/NotificationData$Entry;.row
12-09 21:59:43.807 D/dalvikvm(6180): DexOpt: couldn't find field Lcom/android/systemui/statusbar/NotificationData$Entry;.row
12-09 21:59:43.807 D/dalvikvm(6180): DexOpt: couldn't find field Lcom/android/systemui/statusbar/NotificationData$Entry;.row
12-09 21:59:43.807 I/dalvikvm(6180): DexOpt: unable to optimize instance field ref 0x030b at 0x0c in Lcom/android/systemui/statusbar/policy/HeadsUpNotificationView;.canChildBeExpanded
12-09 21:59:43.807 D/dalvikvm(6180): DexOpt: couldn't find field Lcom/android/systemui/statusbar/NotificationData$Entry;.row
12-09 21:59:43.807 I/dalvikvm(6180): DexOpt: unable to optimize instance field ref 0x030b at 0x2a in Lcom/android/systemui/statusbar/policy/HeadsUpNotificationView;.setNotification
12-09 21:59:43.807 D/dalvikvm(6180): DexOpt: couldn't find field Lcom/android/systemui/statusbar/NotificationData$Entry;.row
12-09 21:59:43.807 I/dalvikvm(6180): DexOpt: unable to optimize instance field ref 0x030b at 0x0c in Lcom/android/systemui/statusbar/policy/HeadsUpNotificationView;.setUserExpandedChild
12-09 21:59:43.807 D/dalvikvm(6180): DexOpt: couldn't find field Lcom/android/systemui/statusbar/NotificationData$Entry;.row
12-09 21:59:43.807 I/dalvikvm(6180): DexOpt: unable to optimize instance field ref 0x030b at 0x0c in Lcom/android/systemui/statusbar/policy/HeadsUpNotificationView;.setUserLockedChild
12-09 21:59:44.067 I/dalvikvm(6180): Could not find method com.android.internal.telephony.ITelephony.setPreferredNetworkType, referenced from method com.sonymobile.systemui.statusbar.tools.LteService.changeTo
12-09 21:59:44.127 D/PhoneStatusBar(6180): disable: < expand icons alerts ticker system_info back home recent clock search >
12-09 21:59:44.127 V/PhoneStatusBar(6180): setLightsOn(true)
12-09 21:59:45.429 D/StatusBar.NetworkController(6180): In updateSimIcon simState= READY
12-09 21:59:45.449 D/StatusBar.NetworkController(6180): In updateSimIcon simState= UNKNOWN
12-09 21:59:45.459 D/PhoneStatusBarPolicy(6180): updateSimState for subscription :0
Dominator_666 said:
Same here, system ui has stopped when i connected the charger to the phone
Click to expand...
Click to collapse
Alright.. I'll upload fixed SystemUI today.. Stay tuned..
josu2016 said:
I don't know if this is what you request about the logcat but this is what logcat show me when systemUI Force close
//sorry for my english :silly:
Code:
12-09 21:59:40.744 D/StatusBar.NetworkController(6137): In updateSimIcon simState= READY
12-09 21:59:40.754 D/StatusBar.NetworkController(6137): In updateSimIcon simState= UNKNOWN
12-09 21:59:40.774 D/PhoneStatusBarPolicy(6137): updateSimState for subscription :0
12-09 21:59:43.347 W/InputDispatcher(789): channel '41ca7ca0 StatusBar (server)' ~ Consumer closed input channel or an error occurred. events=0x9
12-09 21:59:43.347 E/InputDispatcher(789): channel '41ca7ca0 StatusBar (server)' ~ Channel is unrecoverably broken and will be disposed!
12-09 21:59:43.357 W/InputDispatcher(789): Attempted to unregister already unregistered input channel '41ca7ca0 StatusBar (server)'
12-09 21:59:43.357 I/WindowState(789): WIN DEATH: Window{41ca7ca0 u0 StatusBar}
12-09 21:59:43.497 D/SystemUIService(6180): loading: class com.android.systemui.statusbar.phone.PhoneStatusBar
12-09 21:59:43.507 D/SystemUIService(6180): running: com.androi[email protected]
12-09 21:59:43.527 I/StatusBarManagerService(789): registerStatusBar [email protected]8
12-09 21:59:43.577 D/PhoneStatusBar(6180): mSettingsPanelGravity = 55
12-09 21:59:43.807 D/dalvikvm(6180): DexOpt: couldn't find field Lcom/android/systemui/statusbar/NotificationData$Entry;.row
12-09 21:59:43.807 D/dalvikvm(6180): DexOpt: couldn't find field Lcom/android/systemui/statusbar/NotificationData$Entry;.row
12-09 21:59:43.807 I/dalvikvm(6180): Could not find method com.android.systemui.statusbar.BaseStatusBar.onHeadsUpDismissed, referenced from method com.android.systemui.statusbar.policy.HeadsUpNotificationView.onChildDismissed
12-09 21:59:43.807 W/dalvikvm(6180): VFY: unable to resolve virtual method 2448: Lcom/android/systemui/statusbar/BaseStatusBar;.onHeadsUpDismissed ()V
12-09 21:59:43.807 I/dalvikvm(6180): Could not find method com.android.systemui.statusbar.BaseStatusBar.resetHeadsUpDecayTimer, referenced from method com.android.systemui.statusbar.policy.HeadsUpNotificationView.onTouchEvent
12-09 21:59:43.807 W/dalvikvm(6180): VFY: unable to resolve virtual method 2454: Lcom/android/systemui/statusbar/BaseStatusBar;.resetHeadsUpDecayTimer ()V
12-09 21:59:43.807 D/dalvikvm(6180): DexOpt: couldn't find field Lcom/android/systemui/statusbar/NotificationData$Entry;.row
12-09 21:59:43.807 D/dalvikvm(6180): DexOpt: couldn't find field Lcom/android/systemui/statusbar/NotificationData$Entry;.row
12-09 21:59:43.807 D/dalvikvm(6180): DexOpt: couldn't find field Lcom/android/systemui/statusbar/NotificationData$Entry;.row
12-09 21:59:43.807 D/dalvikvm(6180): DexOpt: couldn't find field Lcom/android/systemui/statusbar/NotificationData$Entry;.row
12-09 21:59:43.807 I/dalvikvm(6180): DexOpt: unable to optimize instance field ref 0x030b at 0x0c in Lcom/android/systemui/statusbar/policy/HeadsUpNotificationView;.canChildBeExpanded
12-09 21:59:43.807 D/dalvikvm(6180): DexOpt: couldn't find field Lcom/android/systemui/statusbar/NotificationData$Entry;.row
12-09 21:59:43.807 I/dalvikvm(6180): DexOpt: unable to optimize instance field ref 0x030b at 0x2a in Lcom/android/systemui/statusbar/policy/HeadsUpNotificationView;.setNotification
12-09 21:59:43.807 D/dalvikvm(6180): DexOpt: couldn't find field Lcom/android/systemui/statusbar/NotificationData$Entry;.row
12-09 21:59:43.807 I/dalvikvm(6180): DexOpt: unable to optimize instance field ref 0x030b at 0x0c in Lcom/android/systemui/statusbar/policy/HeadsUpNotificationView;.setUserExpandedChild
12-09 21:59:43.807 D/dalvikvm(6180): DexOpt: couldn't find field Lcom/android/systemui/statusbar/NotificationData$Entry;.row
12-09 21:59:43.807 I/dalvikvm(6180): DexOpt: unable to optimize instance field ref 0x030b at 0x0c in Lcom/android/systemui/statusbar/policy/HeadsUpNotificationView;.setUserLockedChild
12-09 21:59:44.067 I/dalvikvm(6180): Could not find method com.android.internal.telephony.ITelephony.setPreferredNetworkType, referenced from method com.sonymobile.systemui.statusbar.tools.LteService.changeTo
12-09 21:59:44.127 D/PhoneStatusBar(6180): disable: < expand icons alerts ticker system_info back home recent clock search >
12-09 21:59:44.127 V/PhoneStatusBar(6180): setLightsOn(true)
12-09 21:59:45.429 D/StatusBar.NetworkController(6180): In updateSimIcon simState= READY
12-09 21:59:45.449 D/StatusBar.NetworkController(6180): In updateSimIcon simState= UNKNOWN
12-09 21:59:45.459 D/PhoneStatusBarPolicy(6180): updateSimState for subscription :0
Click to expand...
Click to collapse
Well friend...You took logcat but it is not showing the error.. The error in logcat usually starts with E/FATAL EXCEPTION: or E/FATAL MAIN: ... It's okay by the way.. I'll upload fixed SystemUI today...
Strange,I have no such problems.Perhaps the problem is not in fashion.
FC Fixed SystemUI
For Those Who are getting force close when charger connected to phone...Flash the SystemUI through recovery or extract from zip and manually replace the SystemUI from the Attachment...
Don't forget to hit THANKS button if you liked my work...
Amirxon said:
Strange,I have no such problems.Perhaps the problem is not in fashion.
Click to expand...
Click to collapse
Neither do I...Just few people are reporting this problem...Maybe the problem is in their charger...It might not be original...
Anyways I've uploaded Fixed SystemUI for them but they'll not get the Vibration and Charger Connected tone I've added when the cable is connected...Really Sorry for that Friends...
Okay bro,good luck.
STRYDER~007 said:
For Those Who are getting force close when charger connected to phone...Flash the SystemUI through recovery or extract from zip and manually replace the SystemUI from the Attachment...
Don't forget to hit THANKS button if you liked my work...
Click to expand...
Click to collapse
Thanks now works perfect
MY DEVICE IS HUAWEI ASCEND G526 4.1.2 systemui not decompileable with currect apktool
Im using Huawei G510 4.1.1 systemui.apk to apply mods and here is my logcat... btw all mods running....
The problem is search panel functionality specially the long press home key gets force close and i wanna solve that to complete my systemui...
How to port my 4.1.2 search panel to the one im using 4.1.1....
I have decompiled the classes dex of my stock systemui, since with kitchen it can decompile the classes but not the whole systemui.apk
Plz help i need guidance!
SYSTEMUI.APK LOGCAT:
10-15 01:41:00.702 653 758 W WindowManager: statePower =normal
10-15 01:41:00.702 653 758 E WindowManager: getkey down, keyCode =true, 3
10-15 01:41:01.213 3557 3568 E JavaBinder: *** Uncaught remote exception! (Exceptions are not yet supported across processes.)
10-15 01:41:01.213 3557 3568 E JavaBinder: java.lang.AbstractMethodError: abstract method not implemented
10-15 01:41:01.213 3557 3568 E JavaBinder: at com.android.internal.statusbar.IStatusBar$Stub.showSearchPanel(IStatusBar.java)
10-15 01:41:01.213 3557 3568 E JavaBinder: at com.android.internal.statusbar.IStatusBar$Stub.onTransact(IStatusBar.java:204)
10-15 01:41:01.213 3557 3568 E JavaBinder: at android.os.Binder.execTransact(Binder.java:367)
10-15 01:41:01.213 3557 3568 E JavaBinder: at dalvik.system.NativeStart.run(Native Method)
10-15 01:41:01.213 3557 3568 W dalvikvm: threadid=9: thread exiting with uncaught exception (group=0x40cd2438)
10-15 01:41:01.663 653 662 E dalvikvm: GC_EXPLICIT freed 199K, 39% free 15762K/25543K, paused 8ms+9ms, total 131ms
10-15 01:41:01.743 653 758 W WindowManager: statePower =normal
10-15 01:41:01.743 653 758 E WindowManager: getkey down, keyCode =false, 3
10-15 01:41:02.394 653 757 W InputDispatcher: channel '41d051f8 RecentsPanel (server)' ~ Consumer closed input channel or an error occurred. events=0x9
10-15 01:41:02.394 653 757 E InputDispatcher: channel '41d051f8 RecentsPanel (server)' ~ Channel is unrecoverably broken and will be disposed!
10-15 01:41:02.394 653 757 W InputDispatcher: channel '41d06c10 StatusBar (server)' ~ Consumer closed input channel or an error occurred. events=0x9
10-15 01:41:02.394 653 757 E InputDispatcher: channel '41d06c10 StatusBar (server)' ~ Channel is unrecoverably broken and will be disposed!
10-15 01:41:02.394 653 1059 W InputDispatcher: Attempted to unregister already unregistered input channel '41d051f8 RecentsPanel (server)'
10-15 01:41:02.394 653 662 W InputDispatcher: Attempted to unregister already unregistered input channel '41d06c10 StatusBar (server)'
Attacheds is my systemui ported with mods 4.1.1 and my stock classes.dex 4.1.2 plus the framework-res.apk on file 1.apk
Hi there,
Thanks for using XDA Assist.
Try asking for help in the below thread:
http://forum.xda-developers.com/showthread.php?t=2274119
Good luck.
Primokorn said:
Hi there,
Thanks for using XDA Assist.
Try asking for help in the below thread:
http://forum.xda-developers.com/showthread.php?t=2274119
Good luck.
Click to expand...
Click to collapse
Tnx for the direction and for reading my request... anyway i found a workaround... Since i have an idea that 4.1.1 and 4.1.2 methods and classes not that compatible with each other particularly search panel method which handles the long press home key... I have found out the long press home key method handles is residing at framework android policy and all i have done is just nullify the method so that it wudnt run through its codes that is incompatible... and force close gone along with stock home long press functionality anyway no errors already..
But Im still hoping I cud learn and find a way to port search panel method... Im asking for those who has an idea since i tried digging through the codes and it has so many smalis involved..
The Blackview BV9800 Pro is a relatively rare device, and has no support from LineageOS or any other popular ROM project I can find. This is kind of a shame, because it's a pretty cool device - in particular, it has an integrated thermal camera, and is also just a nice ruggedized phone at a surprisingly low price. The bootloader is unlockable out of the box without any need for an unlock code or other nonsense from the vendor, which is also a big bonus.
Being a Project Treble-compatible device, it's possible to run unofficial GSI builds of LineageOS on it, such as these, which are replacement images to flash over /system. These work well with the majority of the BV9800 Pro's functions (wireless, visible-light cameras, sensors, etc.), but getting the thermal camera to work requires a little bit more work. I have done this successfully, so I wanted to share what I did in case anyone else finds themselves in the same situation.
I have only tested these procedures on a BV9800 Pro (EEA version), running LineageOS 16 (Android 9) from the link above. Other versions of Android may work, but I do not know whether they do or not, and decided to stay with Android 9, since this is what the vendor ships on the device. Your results may vary if you decide to try a newer version.
The factory MyFLIR app for the device can be found at this location in the stock ROM:
Code:
/system/app/myflir-bv2.3.6-release-signed/myflir-bv2.3.6-release-signed.apk
However, if you try to just install it like a normal app package under LineageOS, it crashes on startup without providing any useful information. The system logs reveal that it crashes because it's trying to communicate with a system service that manages the thermal camera, but this service isn't installed. Fortunately, you can install it by just copying a few files from the factory ROM over to the LineageOS system. The files in question are located at these paths in the factory ROM:
Code:
/system/bin/leptonServer
/system/etc/init/LeptonCameraServer.rc
/system/lib64/libleptoncamera.so
If you copy these files to the same paths in the LineageOS /system tree, then the Lepton camera server backend, which is required for the MyFLIR app to function, will be installed and configured to start at boot.
SELinux seems to prevent the app from connecting to the Lepton server on my device, so I had to disable it by running
Code:
setenforce 0
in a root shell on the device. I didn't install it as a system app, though, which could be part of the problem. I don't know much about how SELinux actually works, but I feel comfortable enough disabling it. If you don't want to disable it, you can probably find information about how to make it allow the FLIR app to work, but I'm afraid I can't be of much help there.
You can find a copy of the stock BV9800 Pro ROM here on the Blackview forum.
If you want to root the stock ROM to allow you to inspect /system, this thread explains how. If you prefer, you can instead extract the ROM zip archive on a computer, decompress the included system.img with simg2img, and mount it to inspect the contents directly, which is what I did. Modifying /system on a running device can be difficult these days, so it will probably work best to mount up the GSI image the same way and copy the files into it, rather than try to edit it in-place on a running device.
I hope this information helps. The thermal camera is one of the most important (and expensive) features of the BV9800 Pro, and getting it working was pretty much the deciding factor for me as to whether I would keep the (kind of bad) factory ROM, or get to enjoy all the perks of LineageOS. I'm not really knowledgeable enough to write a complete and trustworthy guide to installing LineageOS, though, so if you're just getting started, you'll want to find a more detailed tutorial about how installing custom ROMs (especially GSI/Treble builds) works.
That's a cool rugged phone. Stock it's running on Pie... personally I leave it be and optimize it as best I could to get maximum battery life.
I was looking at these... FLIR, hell yes.
I was following your guide, I'm using my Blackview 9800pro without GApps (but with MicroG 0.2.18.204714) on LineageOS 17.1-20210321. When opening the MyFlir camera or gallery app, it asks me for all the relevant permissions on the first start and then promptly crashes every time I open it. I tried both as a system and a regular app, with and without selinux. In the error below, it complains about not finding the right function in libvndksupport.so. This library is much smaller in LineageOS than it is shipped in the Stock ROM from Blackview. Replacing the LineageOS shared object file with the one from Blackview causes my phone not to boot. Is there something I am missing that causes my instance of the app (I tried both 2.3.6 and 2.3.8) to crash?
Code:
04-28 00:27:34.047 1383 5788 I ActivityTaskManager: START u0 {act=android.intent.action.MAIN cat=[android.intent.category.LAUNCHER] flg=0x10200000 cmp=com.flir.tiger/com.flir.monarch.ui.MainActivity bnds=[27,996][232,1321]} from uid 10121
04-28 00:27:34.057 783 804 I [email protected]: powerHintAsync hint:8, data:1
04-28 00:27:34.061 783 803 I libPowerHal: 8: legacy set freq: 1989000 -1 2106000 -1
04-28 00:27:34.076 1383 1420 E system_server: Invalid ID 0x00000000.
04-28 00:27:34.077 1383 1419 W ActivityManager: Stopping service due to app idle: u0a216 -10s135ms com.flir.tiger/com.flir.monarch.media.MediaScanner
04-28 00:27:34.084 1008 1008 D Zygote : Forked child process 7648
04-28 00:27:34.087 1383 1426 I ActivityManager: Start proc 7648:com.flir.tiger/u0a216 for pre-top-activity {com.flir.tiger/com.flir.monarch.ui.MainActivity}
04-28 00:27:34.147 1579 1579 D ImageWallpaper: wallpaper visibility changes to: false
04-28 00:27:34.161 762 864 I hwcomposer: [DEV] 1024 0 0 0
04-28 00:27:34.162 762 864 I hwcomposer: [DEV] 0 741 0 0
04-28 00:27:34.162 762 864 I hwcomposer: [DEV] 0 0 470 0
04-28 00:27:34.162 762 864 I hwcomposer: [DEV] 0 0 0 1024
04-28 00:27:34.173 7648 7648 D FirebaseApp: com.google.firebase.auth.FirebaseAuth is not linked. Skipping initialization.
04-28 00:27:34.174 7648 7648 D FirebaseApp: com.google.firebase.crash.FirebaseCrash is not linked. Skipping initialization.
04-28 00:27:34.174 7648 7648 I FirebaseInitProvider: FirebaseApp initialization successful
04-28 00:27:34.177 762 864 I hwcomposer: [DEV] [DEV] (Send identity matrix)
04-28 00:27:34.187 7648 7673 I FA : App measurement is starting up, version: 15300
04-28 00:27:34.187 7648 7673 I FA : To enable debug logging run: adb shell setprop log.tag.FA VERBOSE
04-28 00:27:34.187 7648 7673 I FA : To enable faster debug mode event logging run:
04-28 00:27:34.187 7648 7673 I FA : adb shell setprop debug.firebase.analytics.app com.flir.tiger
04-28 00:27:34.196 762 864 I hwcomposer: [DEV] 1024 0 0 0
04-28 00:27:34.196 762 864 I hwcomposer: [DEV] 0 741 0 0
04-28 00:27:34.196 762 864 I hwcomposer: [DEV] 0 0 470 0
04-28 00:27:34.196 762 864 I hwcomposer: [DEV] 0 0 0 1024
04-28 00:27:34.200 7648 7648 I CrashlyticsCore: Initializing Crashlytics 2.6.8.32
04-28 00:27:34.207 7648 7686 W ContextImpl: Failed to ensure /data/user/0/com.google.android.gms/shared_prefs: mkdir failed: EACCES (Permission denied)
04-28 00:27:34.208 7648 7648 I CrashlyticsInitProvider: CrashlyticsInitProvider initialization successful
04-28 00:27:34.212 762 864 I hwcomposer: [DEV] [DEV] (Send identity matrix)
04-28 00:27:34.220 2428 2428 D GmsMeasureBrokerSvc: onBind: Intent { act=com.google.android.gms.measurement.START pkg=com.google.android.gms }
04-28 00:27:34.222 3179 3179 D GmsGcmRegister: onBind: Intent { act=com.google.android.c2dm.intent.REGISTER pkg=com.google.android.gms }
04-28 00:27:34.223 1024 1024 I netd : firewallSetUidRule(2, 10161, 1) <2.63ms>
04-28 00:27:34.227 1024 1024 I netd : firewallSetUidRule(2, 10160, 1) <1.74ms>
04-28 00:27:34.230 1024 1024 I netd : firewallSetUidRule(2, 10157, 1) <2.14ms>
04-28 00:27:34.233 1024 1024 I netd : firewallSetUidRule(2, 10151, 1) <1.85ms>
04-28 00:27:34.236 7648 7648 I ashmem : memfd: device VNDK version (28) is < Q so using ashmem.
04-28 00:27:34.277 7648 7648 D AndroidRuntime: Shutting down VM
04-28 00:27:34.277 7648 7648 E AndroidRuntime: FATAL EXCEPTION: main
04-28 00:27:34.277 7648 7648 E AndroidRuntime: Process: com.flir.tiger, PID: 7648
04-28 00:27:34.277 7648 7648 E AndroidRuntime: java.lang.UnsatisfiedLinkError: dlopen failed: cannot locate symbol "android_get_exported_namespace" referenced by "/data/app/com.flir.tiger-EcVVz9vk2XWvVymOtKJxOQ==/lib/arm64/libvndksupport.so"...
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at java.lang.Runtime.loadLibrary0(Runtime.java:1071)
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at java.lang.Runtime.loadLibrary0(Runtime.java:1007)
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at java.lang.System.loadLibrary(System.java:1667)
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at com.flir.flirone.sdk.FlirOne.<clinit>(FlirOne.java:59)
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at com.flir.flirone.sdk.FlirOne.registerDeviceCallback(FlirOne.java:341)
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at com.flir.monarch.app.ForegroundApplication.onActivityStarted(ForegroundApplication.java:88)
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at android.app.Application.dispatchActivityStarted(Application.java:406)
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at android.app.Activity.dispatchActivityStarted(Activity.java:1238)
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at android.app.Activity.onStart(Activity.java:1723)
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at android.support.v4.app.FragmentActivity.onStart(FragmentActivity.java:614)
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at android.support.v7.app.AppCompatActivity.onStart(AppCompatActivity.java:178)
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at com.flir.monarch.ui.MainActivity.onStart(MainActivity.java:79)
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at android.app.Instrumentation.callActivityOnStart(Instrumentation.java:1432)
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at android.app.Activity.performStart(Activity.java:7847)
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at android.app.ActivityThread.handleStartActivity(ActivityThread.java:3294)
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at android.app.servertransaction.TransactionExecutor.performLifecycleSequence(TransactionExecutor.java:221)
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at android.app.servertransaction.TransactionExecutor.cycleToPath(TransactionExecutor.java:201)
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at android.app.servertransaction.TransactionExecutor.executeLifecycleState(TransactionExecutor.java:173)
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at android.app.servertransaction.TransactionExecutor.execute(TransactionExecutor.java:97)
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at android.app.ActivityThread$H.handleMessage(ActivityThread.java:2016)
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at android.os.Handler.dispatchMessage(Handler.java:107)
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at android.os.Looper.loop(Looper.java:214)
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at android.app.ActivityThread.main(ActivityThread.java:7356)
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at java.lang.reflect.Method.invoke(Native Method)
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at com.android.internal.os.RuntimeInit$MethodAndArgsCaller.run(RuntimeInit.java:491)
04-28 00:27:34.277 7648 7648 E AndroidRuntime: at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:940)
04-28 00:27:35.334 1383 5501 D AlarmManagerService: Kernel timezone updated to -120 minutes west of GMT
04-28 00:27:35.348 1383 6143 D AlarmManagerService: Kernel timezone updated to -120 minutes west of GMT
04-28 00:27:35.709 1090 1371 I 1090 1371 [sunwave-hal] : (711) 'healthMonitoringThread' enter.
04-28 00:27:35.710 1090 1371 I 1090 1371 [sunwave-client] : (90) ---8<---- TA LOG BEGINS ---------
04-28 00:27:35.710 1090 1371 I 1090 1371 [sunwave-ta-core] : (2869) 'sf_get_device_state' state:0008
04-28 00:27:35.710 1090 1371 I 1090 1371 [sunwave-client] : (107) --------- TA LOG FINISH ---->8---
Thanks for the info for the flir Camera,
It works fine with lineage OS 16 !
I want to add the info I got while doing it:
It does not work with all version of Andy Custom Lineage OS: I could not make it works with this one: lineage-16.0-20191017-UNOFFICIAL-treble_arm64_bvN.img.xz the lepton server had a seg fault.
I try with a lineage OS 18 , the lepton server worked but the application failed, I will look into it one day... maybe
I root my phone with magisk
I used a script to bypass SElinux and start the server when i want ( because i don't know if it wise to always have SElinux in permissive mode)
tylab said:
Thanks for the info for the flir Camera,
It works fine with lineage OS 16 !
I want to add the info I got while doing it:
It does not work with all version of Andy Custom Lineage OS: I could not make it works with this one: lineage-16.0-20191017-UNOFFICIAL-treble_arm64_bvN.img.xz the lepton server had a seg fault.
I try with a lineage OS 18 , the lepton server worked but the application failed, I will look into it one day... maybe
I root my phone with magisk
I used a script to bypass SElinux and start the server when i want ( because i don't know if it wise to always have SElinux in permissive mode)
Click to expand...
Click to collapse
thank u for the additional info!,so which version of lineage os 16 worked for u? iam on lineage-16.0-20191017-UNOFFICIAL-treble_arm64_bvN.img.xz and tried the author's steps but didn't work for me, also it'd be nice if u share with us the script u use to bybass selinux,thanks.
I want to report back some of my own success in regards to this thread. I have the camera working, but it's not a perfect solution and was wondering if you guys could assist me in checking what I could have possibly missed. I'm running it on the most current Lineage OS 18.1; I've compiled a version using the Treble ROM lineage-18.1-20210512-UNOFFICIAL-treble_arm64_bvS with Magisk as root (I also added MindTheGapps into it after some workarounds with the mounts, and had to register my device as an "unsupported device").
I followed the OP's guide to the T, and still couldn't get the app to even open. The logs revealed it was trying to call leptonServer, nulling out after five tries, and then crashing. Narrowed this down to being an issue with the /bin/leptonServer file itself being set as -rwx-r--r--, and changing it to -rwxr-x-r-x got the app to boot up. The only problem is, for the camera to actually start, I have to open a terminal session and start leptonServer from there, and I assume this has something to do with the SELinux policies in place. I've fought half the battle and got a version of sepolicy-inject set up to run (using the following policy: allow untrusted_app_27 default_android_service:service_manager { find }; (sepolicy-inject -s untrusted_app_27 -t default_android_service -c service_manager -p find (if this doesn't work for you, try doing logcat ServiceManager:V SELinux:V *:S to find the relevant SELinux policies that you need to apply, and follow the formulas))), but I figure this is still erroring out somewhere, since, after a restart, the only way I can get it working again is to go and disable SELinux using setenforce to 0 and then starting the server again using some sort of terminal. I also installed the MyFlir app as a system app.
I believe that part of the issue might be that I haven't properly added the SELinux policy, but I'm not entirely positive how I would go about testing this (I've more or less just gotten into the ROM building scene last week, but feel I have somewhat of an edge being a software developer for a living). I think if I boot into recovery I can grab the sepolicy file, but I'm not sure what else to do with it at this point.
The error I get when it's not running, aside from the PID is pretty consistent too:
05-31 19:19:06.814 372 372 E SELinux : avc: denied { find } for pid=20308 uid=10195 name=LeptonCameraService scontext=u:r:untrusted_app_27:s0:c195,c256,c512,c768 tcontext=ubject_r:default_android_service:s0 tclass=service_manager permissive=0
Hopefully, this helps someone to find the right answers before I can; I know I'll keep tinkering with it until I find the solution (I'm also attempting to overcome the CTSProfile/Basic failure in Magisk, which I plan to make a guide if I can find an answer).
I get the same error as @&00&V5yt$r2$E!n1IDUiJ9bF on Lineage18.1 - treble_arm64_bvS-userdebug
04-28 00:27:34.277 7648 7648 E AndroidRuntime: java.lang.UnsatisfiedLinkError: dlopen failed: cannot locate symbol "android_get_exported_namespace" referenced by "/data/app/com.flir.tiger-EcVVz9vk2XWvVymOtKJxOQ==/lib/arm64/libvndksupport.so"...
My leptonServer is working correctly and service runs from the start so it I feel this is related to the /system/app/myflir-bv2.3.6-release-signed.
Are you guys using a different version of the app?
Flir said:
I get the same error as @&00&V5yt$r2$E!n1IDUiJ9bF on Lineage18.1 - treble_arm64_bvS-userdebug
04-28 00:27:34.277 7648 7648 E AndroidRuntime: java.lang.UnsatisfiedLinkError: dlopen failed: cannot locate symbol "android_get_exported_namespace" referenced by "/data/app/com.flir.tiger-EcVVz9vk2XWvVymOtKJxOQ==/lib/arm64/libvndksupport.so"...
My leptonServer is working correctly and service runs from the start so it I feel this is related to the /system/app/myflir-bv2.3.6-release-signed.
Are you guys using a different version of the app?
Click to expand...
Click to collapse
I also used myflir-bv2.3.6-release-signed, pulled straight from the currently available 9.0 ROM.
For that specifically, if you are looking at the most recent ROM build available from Blackview, in the directory /system/system/app/myflir-bv2.3.6-release-signed, there is both the APK and a lib folder. I'd copy the lib folder over to your phone in that same directory; I think you're missing the dependencies from there.
If you already have those libaries in there, try the read/write settings on the folder too.
Hi bv9800 pro customers! Anyone tryed the magisk module in the thread https://forum.xda-developers.com/t/blackview-bv9900pro-magisk-modules.4331187/
to get flir worked on linage?
ilich79 said:
Hi bv9800 pro customers! Anyone tryed the magisk module in the thread https://forum.xda-developers.com/t/blackview-bv9900pro-magisk-modules.4331187/
to get flir worked on linage?
Click to expand...
Click to collapse
Hi ilich79
I tryed the magisk module for BV9900pro.
I have installed it manualy to improve my understanding.
First, selinux block as always :
E/SELinux ( 338): avc: denied { find } for pid=18411 uid=10175 name=LeptonCameraService scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:default_android_service:s0 tclass=service_manager permissive=0
After enforce selinux and relanch the leptonServer.
Application launch completly but the camera send only the first image and block after that
So, i replace the leptonServer by the old one and retry.
Finally it works fully.
I someone know how to correctly set the selinux policy for this app ? I will be graceful
May be this can help?
[MODULE] SELinux Mode Inverter (Advanced SELinux Mode Changer)
It Is Now A Part Of The Main Module Of MultiFunctions & Its Thread https://forum.xda-developers.com/apps/magisk/module-multifunctions-bootloop-t3933386. Introduction: Simple Module To Invert The Default Android SELinux Mode During Startup ([From...
forum.xda-developers.com
Flir said:
I get the same error as @&00&V5yt$r2$E!n1IDUiJ9bF on Lineage18.1 - treble_arm64_bvS-userdebug
04-28 00:27:34.277 7648 7648 E AndroidRuntime: java.lang.UnsatisfiedLinkError: dlopen failed: cannot locate symbol "android_get_exported_namespace" referenced by "/data/app/com.flir.tiger-EcVVz9vk2XWvVymOtKJxOQ==/lib/arm64/libvndksupport.so"...
My leptonServer is working correctly and service runs from the start so it I feel this is related to the /system/app/myflir-bv2.3.6-release-signed.
Are you guys using a different version of the app?
Click to expand...
Click to collapse
I get the same error, @QuentinX5 : Did you use a different version? Would be nice to have a Lineage upgrade.
Regarding the problem with the MyFlir camera app: I had the same problem (unable to read camera files). I looked everywhere. I mean, everywhere trying to find an answer. There's also a video on youtube with comments suggesting flashing the APD.BIN file (I did not try). I even translated different language websites. Finally, I contacted the BV customer support and their reply was the classic (clear the app cache), which doesn't work at all and not just for me. I tried to get the APK file from the image and installing it which didn't work either.
Here's the simple magic solution that kept me trying for a week, and no one wrote it anywhere:
There's a folder named (com.flir.tiger) inside the Android folder in the phone storage with the contents:
com.flir.tiger\files\iron
com.flir.tiger\files\CameraFiles\system\calib.rsc
com.flir.tiger\files\CameraFiles\system\maps\ds_we_ap_fi_le_LCFMap.fff
Just copy the folder from another phone and paste it on your phone, and that's it!
thelaseman said:
Regarding the problem with the MyFlir camera app: I had the same problem (unable to read camera files). I looked everywhere. I mean, everywhere trying to find an answer. There's also a video on youtube with comments suggesting flashing the APD.BIN file (I did not try). I even translated different language websites. Finally, I contacted the BV customer support and their reply was the classic (clear the app cache), which doesn't work at all and not just for me. I tried to get the APK file from the image and installing it which didn't work either.
Here's the simple magic solution that kept me trying for a week, and no one wrote it anywhere:
There's a folder named (com.flir.tiger) inside the Android folder in the phone storage with the contents:
com.flir.tiger\files\iron
com.flir.tiger\files\CameraFiles\system\calib.rsc
com.flir.tiger\files\CameraFiles\system\maps\ds_we_ap_fi_le_LCFMap.fff
Just copy the folder from another phone and paste it on your phone, and that's it!
Click to expand...
Click to collapse
Hi do you think your solution works for all lineageos releases? If I change the stock rom I was thinking on putting release 19.1
thelaseman said:
Regarding the problem with the MyFlir camera app: I had the same problem (unable to read camera files). I looked everywhere. I mean, everywhere trying to find an answer. There's also a video on youtube with comments suggesting flashing the APD.BIN file (I did not try). I even translated different language websites. Finally, I contacted the BV customer support and their reply was the classic (clear the app cache), which doesn't work at all and not just for me. I tried to get the APK file from the image and installing it which didn't work either.
Here's the simple magic solution that kept me trying for a week, and no one wrote it anywhere:
There's a folder named (com.flir.tiger) inside the Android folder in the phone storage with the contents:
com.flir.tiger\files\iron
com.flir.tiger\files\CameraFiles\system\calib.rsc
com.flir.tiger\files\CameraFiles\system\maps\ds_we_ap_fi_le_LCFMap.fff
Just copy the folder from another phone and paste it on your phone, and that's it!
Click to expand...
Click to collapse
Hi, I'm trying to get the flir camera working on lineage 19.1 can @thelaseman gime me the file you write about? beacause I don't have another phone to copy from.
Thanks
Max
max74926 said:
Hi, I'm trying to get the flir camera working on lineage 19.1 can @thelaseman gime me the file you write about? beacause I don't have another phone to copy from.
Thanks
Max
Click to expand...
Click to collapse
If you are still looking for it I might be able to extract these files for you.
@thelaseman @QuentinX5
Is anyone still using a BV9800 Pro with a Lineage ROM? What version are you on, what specific build did you install, did you encounter any specific issues, were they fixable and how?
Not asking for a full guide (wouldn't mind of course ) but before I start messing with what is currently my daily driver I'd like to know if anyone else was successful with a certain version. Particularly interested if any newer versions have also ended up working with the FLIR-camera.
Hi @dj__jg,
I use the attached files for lineage 19.1 GSI (https://forum.xda-developers.com/t/gsi-12-lineageos-19-x-gsi-a64b-64b.4358041/).
My camera calib is wrong (the thermal camera is upside down.) so I don't push the calib file here, if you have a good one, i'm interested.
I don't have fixed the selinux error for the moment, so just disable it went you launch the '/system/bin/leptonServer'
I missnamed the attached file, it's for BV9800 pro
I suddenly feel very stupid, I just realised I've gotten confused about my phones model number
I actually have a Blackview ninethousandninehundred pro, not 9800. I either had a brainfart or made a typo as I was searching if anyone had managed to use a recent Lineage ROM on it and accidentally ended up on this thread and didn't notice.
Luckily I didn't upload my calib file etc here, or someone could have gotten very confused. I think I will try to run a GSI build at some point, but when I have some more spare time/don't need this phone every day. The information about the com.flir.tiger folder is still very handy because it is the same on my model, I hope the same tactics will work to get the FLIR working in a GSI build.
(Wrote out the model number in text so other people googling the model number won't end up confused on this thread without even making a typo)
It's my bad i missnamed my file, it's 9800 pro not 9800 (who don't have thermal camera)