Related
Edit: I tried 9.3.28 and it works.
I followed the instructions on LineageOS site. sideloaded ROM, gapps pico and su from LineageOS site. The TWRP warned me about no OS installed. I tried to boot but get stuck on the LineageOS screen.
I had the same problema following the guide of Lineage OS. I can't boot the rom, however I tried with xiaomi.eu a it worked properly.
What version of the TWRP did you know install? 3.3.0.0?
Hello, So i tried to install GPS joystick privacy mode app as a system app first thru titanium backup then ..., i rebooted and now im on boot loop, what do i do?
Any help is appreciated, Thanks
{Mod edited}
Hold Power + vol up + vol down for several seconds should put you in bootloader. Or alteranately, Power+vol down for several seconds should send you to TWRP if you have it installed. From there, I'm thinking you may need to flash the stock ROM again, since you were messing with the system partition, and the phone is not booting now. Either flash stock ROM in TWRP, or use the fastboot stock ROM.
I didn't have twrp installed and i still dont, i patched the boot image with magisk and all i have is root cause i cant seem to keep TWRP installed after 9.5.3, im currently on 10.3.0
cmurder61 said:
I didn't have twrp installed and i still dont, i patched the boot image with magisk and all i have is root cause i cant seem to keep TWRP installed after 9.5.3, im currently on 10.3.0
Click to expand...
Click to collapse
You should be able to fastboot flash stock boot.img from the fastboot ROMs to get the phone running again: https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
This will unroot the phone. But you should be able to easily root again by the method you did originally.
What is the problem you are having with installing TWRP? You haven't specifically described how you tried to install. I've had no issues using the TWRP installer zip, after multiple updates.
You need to re flash stock so, boot lastest twrp (fastboot boot twrp.img) and flash lastest stock rom.
And if you need an app as system use magisk module App Systemizer (you also need busybox module and Termux app from playstore) this is the only way (that I known) to convert user apps to system
Sent from my OnePlus7Pro using XDA Labs
redpoint73 said:
You should be able to fastboot flash stock boot.img from the fastboot ROMs to get the phone running again: https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
This will unroot the phone. But you should be able to easily root again by the method you did originally.
What is the problem you are having with installing TWRP? You haven't specifically described how you tried to install. I've had no issues using the TWRP installer zip, after multiple updates.
Click to expand...
Click to collapse
Ive tried that it only boots to recivery, i restarted my phone completely with msm its wokring fine now but even after i root on 10.3.0 i still cant get twrp
when i try to install "fastboot flash twrp" it goes thru but it always boot loops to fastboot but when i flash the stock boot image it goes to normal and i can boot into the phone again
RokCruz said:
You need to re flash stock so, boot lastest twrp (fastboot boot twrp.img) and flash lastest stock rom.
And if you need an app as system use magisk module App Systemizer (you also need busybox module and Termux app from playstore) this is the only way (that I known) to convert user apps to system
Sent from my OnePlus7Pro using XDA Labs
Click to expand...
Click to collapse
tried that first part too, cant get into twrp and that makes sense now, i installed busy box but never opened the app to install to system/xbin
here's how ive done my part so far.. ever since i bricked my device last feb 24 , rendering it totally unresponsive.. that not even vol up & power button dont work
1. had to use msm tool just to boot my device. successfully boot my device to 9.5.3
2. device seemed to have a locked bootloader again so i un.lock it again. downloaded a patched 9.5.3 boot.img and flashed it via fastboot
3. successful root confirmed..
4. downloaded twrp 3.3.1-75 unofficial installer.. about 17.5mb. flashed it thru magisk as a module.. then install magisk ( as recommended) then reboot.
5. after a reboot.. and setting it up to my liking,, i reboot to twrp to flash the latest 10.3.1 stable rom..
6. flash twrp installer again.
7. hit reboot then choose Recovery . phone reboot to recovery again
8. flash magisk.zip which i downloaded earlier. then reboot.
done
updated to 10.3.1 with magisk & twrp intact..
btw.. i really dont know how to force my phone to reboot to twrp via PC ADB fastboot command.. easiest way for me to install TWRP is by flashing the TWRP INSTALLER as magisk module
cmurder61 said:
tried that first part too, cant get into twrp and that makes sense now, i installed busy box but never opened the app to install to system/xbin
Click to expand...
Click to collapse
Use busybox magisk module, don't install busybox apps!
Sent from my OnePlus7Pro using XDA Labs
cmurder61 said:
when i try to install "fastboot flash twrp" it goes thru but it always boot loops to fastboot but when i flash the stock boot image it goes to normal and i can boot into the phone again
Click to expand...
Click to collapse
That is because that is NOT the correct way to install TWRP img. You need to fastboot boot TWRP, then once in TWRP flash the TWRP installer zip, as I already mentioned.
This is described in the TWRP dev's thread (and you will see no mention of fastboot flash TWRP).
https://forum.xda-developers.com/on...nt/recovery-unofficial-twrp-recovery-t3931322
Also make sure you use a current version of TWRP (latest is unofficial -76) which you can get from the above link.
redpoint73 said:
That is because that is NOT the correct way to install TWRP img. You need to fastboot boot TWRP, then once in TWRP flash the TWRP installer zip, as I already mentioned.
This is described in the TWRP dev's thread (and you will see no mention of fastboot flash TWRP).
https://forum.xda-developers.com/on...nt/recovery-unofficial-twrp-recovery-t3931322
Also make sure you use a current version of TWRP (latest is unofficial -76) which you can get from the above link.
Click to expand...
Click to collapse
ive tried that still didn't work but illl try again i guess
santiagoruel13 said:
here's how ive done my part so far.. ever since i bricked my device last feb 24 , rendering it totally unresponsive.. that not even vol up & power button dont work
1. had to use msm tool just to boot my device. successfully boot my device to 9.5.3
2. device seemed to have a locked bootloader again so i un.lock it again. downloaded a patched 9.5.3 boot.img and flashed it via fastboot
3. successful root confirmed..
4. downloaded twrp 3.3.1-75 unofficial installer.. about 17.5mb. flashed it thru magisk as a module.. then install magisk ( as recommended) then reboot.
5. after a reboot.. and setting it up to my liking,, i reboot to twrp to flash the latest 10.3.1 stable rom..
6. flash twrp installer again.
7. hit reboot then choose Recovery . phone reboot to recovery again
8. flash magisk.zip which i downloaded earlier. then reboot.
done
updated to 10.3.1 with magisk & twrp intact..
btw.. i really dont know how to force my phone to reboot to twrp via PC ADB fastboot command.. easiest way for me to install TWRP is by flashing the TWRP INSTALLER as magisk module
Click to expand...
Click to collapse
See the way u did it is diff, i did not root first before installing twrp or install twrp as a magisk mod, what is the mod for magisk? where do i get it
cmurder61 said:
See the way u did it is diff, i did not root first before installing twrp or install twrp as a magisk mod, what is the mod for magisk? where do i get it
Click to expand...
Click to collapse
i just simplified it as magisk mod.. but in TWRP THREAD,, its named by maoronofrio as TWRP UNIFIED UNOFFICIAL INSTALLER
and it can only be installed by installing it as magisk module
here's the link
https://forum.xda-developers.com/on...nt/recovery-unofficial-twrp-recovery-t3932943
Hello,
Being in a hurry and with a half broken ROM I installed LOS 17.1 official build and then Magisk. Everything went smoothly but it replaced TWRP with the LOS recovery.
And I will be away from a PC for a while, so cannot use fastboot.
Can I do it from Android? Like those old TWRP installer apps?
Or can I use Magisk somehow? Maybe even a root terminal with a dd command?
I ended up selecting the zip in Magisk's install module prompt, and to my amazement, it worked!
Apparently Magisk can fully emulate a recovery environment even if the zip is not a module.
Amazing really. I have now TWRP installed
Hey, after installing android 11 on my Oneplus 6 I have servere issues on getting root back.
Both methods I used result in a stuck boot.
Method 1: fastboot boot twrp, then install magisk.zip (tried with both 21.4 (last with a zip) and the renamed 23.0 (from apk to zip)
Method 2: Extracted boot.img from my OTA update, then patched with magisk 23.0.
Flashed the new boot.img -with fastboot -with twrp both result in a stuck boot.
Suprisingly flashing the extracted boot.img from the OTA boots fine, but that image is without magisk
Update: I have extracted the boot.img directly from the phone, patched it and it still doesn't work
I've also tried fastboot boot twrp with a variety of versions of twrp after upgrading to 11.1.1.1 but with no success.
If someone could recommend a verified way to root a op6 with 11.1.1.1 I'd appreciate it
Thratchen said:
I've also tried fastboot boot twrp with a variety of versions of twrp after upgrading to 11.1.1.1 but with no success.
If someone could recommend a verified way to root a op6 with 11.1.1.1 I'd appreciate it
Click to expand...
Click to collapse
twrp actually works, but after flashing magisk or flashing a magisk boot.img it breaks. I have a working version here
Ping me if you get magisk working
I can confirm the TWRP-3.5.2-enchilada-Nebrassy-2.img run on my OP6 without any issue and allowed my to install the latest magisk, giving me a fully functioning root for my 11.1.1.1 ROM. Thanks for the help
To remember!
Thratchen said:
I can confirm the TWRP-3.5.2-enchilada-Nebrassy-2.img run on my OP6 without any issue and allowed my to install the latest magisk, giving me a fully functioning root for my 11.1.1.1 ROM. Thanks for the help
Click to expand...
Click to collapse
Which installation method of magisk did you use?
How long did you wait after first boot?
I downloaded the full 11.1.1.1 ROM as I was upgrading from a previous rooted 10.3.x version. I placed this file in the phones root directory and use the "local upgrade" feature.
When that completed I rebooted the phone a few times just to make sure everything was working as expected. I usually waited 1-2 minutes before rebooting every time.
Next I placed the latest magisk version file into the root of the phone rebooted into the bootloader and performed fastboot boot TWRP-3.5.2-enchilada-Nebrassy-2.img which booted into the TWRP as expected. Then I installed the magisk.zip and rebooted the phone into a nice newly rooted magisk environment. Tbh I didn't wait anymore 10-20 seconds to reboot after installing magisk while in TWRP.
I hope that's helpful for you
Thratchen said:
I downloaded the full 11.1.1.1 ROM as I was upgrading from a previous rooted 10.3.x version. I placed this file in the phones root directory and use the "local upgrade" feature.
When that completed I rebooted the phone a few times just to make sure everything was working as expected. I usually waited 1-2 minutes before rebooting every time.
Next I placed the latest magisk version file into the root of the phone rebooted into the bootloader and performed fastboot boot TWRP-3.5.2-enchilada-Nebrassy-2.img which booted into the TWRP as expected. Then I installed the magisk.zip and rebooted the phone into a nice newly rooted magisk environment. Tbh I didn't wait anymore 10-20 seconds to reboot after installing magisk while in TWRP.
I hope that's helpful for you
Click to expand...
Click to collapse
Thanks for the reply, as a last question: Which magisk version did you use (could you link i?t). I assume you took the magisk v23 apk and renamed it to .zip? or what did you do?
Yes. I used the latest canary build of magisk and simply renamed it to magisk.zip
https://raw.githubusercontent.com/topjohnwu/magisk-files/canary/app-debug.apk
Thratchen said:
Yes. I used the latest canary build of magisk and simply renamed it to magisk.zip
https://raw.githubusercontent.com/topjohnwu/magisk-files/canary/app-debug.apk
Click to expand...
Click to collapse
Hmm, I perfectly copied your instructions and still get a bootloop. Even reflashed 11.1.1.1 again. Might be time for a reset
Do you actually get a bootloop or it just gets stuck in the unlocked bootloader warning screen?
Mine hangs there for several minutes before booting, I reflashed several times because of it but all I had to do is wait.
vkass said:
Do you actually get a bootloop or it just gets stuck in the unlocked bootloader warning screen?
Mine hangs there for several minutes before booting, I reflashed several times because of it but all I had to do is wait.
Click to expand...
Click to collapse
I leave the "bootloader unlocked" screen and the rotating "circle" animation plays. I even can connect via adb logcat to see the boot logs (but I do not understand them, though they clearly loop)
is there a zip version of TWRP-3.5.2-enchilada-Nebrassy-2 available that I can flash or can i flash the standard twrp latest zip after booting in to the nebrassy recovery so that it is permanant recovery?
Also can I flash the latest 23 relase of magisk or does it have to be the canary?
I was able to successfully boot in to the nebrassy recovery but i don't want to get in to a permanent bootloop if the standard twrp zip will break things after flashing or the stable relase of magisk will get me in to a bootloop
Thanks @UraniumDonut !
tacohell said:
is there a zip version of TWRP-3.5.2-enchilada-Nebrassy-2 available that I can flash or can i flash the standard twrp lat est zip after booting in to the nebrassy recovery so that it is permanant recovery?
Also can I flash the latest 23 relase of magisk or does it have to be the canary?
I was able to successfully boot in to the nebrassy recovery but i don't want to get in to a permanent bootloop if the standard twrp zip will break things after flashing or the stable relase of magisk will get me in to a bootloop
Thanks @UraniumDonut !
Click to expand...
Click to collapse
The twrp image should have a button in twrp called "install current twrp to recovery" or similar. With magisk I cannot help you as I have bootloops with every version of magisk , but @Thratchen had success with the canary version (I didn't)
UraniumDonut said:
I leave the "bootloader unlocked" screen and the rotating "circle" animation plays. I even can connect via adb logcat to see the boot logs (but I do not understand them, though they clearly loop)
Click to expand...
Click to collapse
Try to flash the full update zip with twrp, it will flash to both partitions, then try to flash latest magisk renamed apk in twrp.
vkass said:
Try to flash the full update zip with twrp, it will flash to both partitions, then try to flash latest magisk renamed apk in twrp.
Click to expand...
Click to collapse
Thanks, I’ll try. A few questions:
Wipe dalvik after flash?
Boot into system or instant flash magisk?
Wipe dalvik after magisk?
Which magisk?(canary or 23.0)?
Thanks!
UraniumDonut said:
The twrp image should have a button in twrp called "install current twrp to recovery" or similar. With magisk I cannot help you as I have bootloops with every version of magisk , but @Thratchen had success with the canary version (I didn't)
Click to expand...
Click to collapse
Thhank @UraniumDonut - that worked - I have never before used that method and honestly didn't even know about it. I use the official documented twrp way which is to first fastboot in to twrp and then install the zip file which has to be located on the phone file system. This method seems a lot easier!
As to magisk, I usually flash that from twrp using the zip file method and never have had any issues. But with all the issues surrounding oos 11 I am playing it safe as I don't want to get in to a boot loop. Will do some more research before I try something. But thanks to you I have made 1 step forward progress!
UraniumDonut said:
Thanks, I’ll try. A few questions:
Wipe dalvik after flash?
Boot into system or instant flash magisk?
Wipe dalvik after magisk?
Which magisk?(canary or 23.0)?
Thanks!
Click to expand...
Click to collapse
I wiped
No need to boot first
Wiping once is enough
I'm using 23
I did not install twrp at all, just booted it, flashed Ota and magisk and reboot.
vkass said:
I wiped
No need to boot first
Wiping once is enough
I'm using 23
I did not install twrp at all, just booted it, flashed Ota and magisk and reboot.
Click to expand...
Click to collapse
I'm out of ideas. I followed your guide exactly.
Flashed 11.1.1.1 OTA.zip
The log said "installing to inactive slot _b, reboot recovery to flash more zips"
I wiped dalvik,
I rebooted into recovery slot b (I didnt boot into system)
I installed magisk 23.0 APK renamed to zip. It installed into slot b.
I did not wipe dalvik.
I rebooted into system.
I still get a stuck boot (OnePlus circles rotating)
Bonus: after "fastboot flash boot stock_boot.img" it boots fine (but no root)
I never installed TWRP, just "fastboot boot TWRP"
I understand nothing
Just for reference here
UraniumDonut said:
I'm out of ideas. I followed your guide exactly.
Flashed 11.1.1.1 OTA.zip
The log said "installing to inactive slot _b, reboot recovery to flash more zips"
I wiped dalvik,
I rebooted into recovery slot b (I didnt boot into system)
I installed magisk 23.0 APK renamed to zip. It installed into slot b.
I did not wipe dalvik.
I rebooted into system.
I still get a stuck boot (OnePlus circles rotating)
Bonus: after "fastboot flash boot stock_boot.img" it boots fine (but no root)
I never installed TWRP, just "fastboot boot TWRP"
I understand nothing
Click to expand...
Click to collapse
I posted detailed steps if you want to give this a try @UraniumDonut: https://forum.xda-developers.com/t/how-to-root-op6-11-1-1-1.4344269/#post-85765879
Unsure if this is the place since its also related to TWRP 3.7, any help is appreicated
Got stuck in a weird situation and wondering if anyone has ideas.
Current State:
Slot_A on OOS 11, can boot TWRP via Fastboot
Slot_B on OOS 12, can only boot into Fastboot
Originally on OOS 11, booted TWRP and made backups of all partitions (data, boot, system image, vendor image, etc.). Forgot to move this to computer so this is all still stored on device.
Proceeded with OOS 12 upgrade (into Slot B). Patched magisk, rebooted, then flashed TWRP 3.7 (FBEv1), direct installed magisk, rebooted. - Everything was functional, but decided to go back to OOS 11.
Thinking I could just use the TWRP backup made on OOS 11, I did the following:
Booted into 3.7 TWRP
Restored the backup for boot, system image, and vendor image
Set active slot to Slot A and reboot
It doesn't allow me to boot into the OS (Presumably because the data was re-encrypted for OOS 12?)
Set active-slot=b and reboot, but it's locked to fastboot.
I've attempted a few things, but I can't boot back into OOS. I would prefer to retrieve my TWRP backups first before doing an MSM reset.
When on Slot_A (older), I can only boot into TWRP 3.6.2 and 3.7. I'm guessing 3.6.2 can't decrypt since it's only configured for A11 and under, but not sure why 3.7 can't decrypt my data.
- It doesn't even ask for pin when TWRP launches; maybe it's reading the System for Slot_A and thinks i'm still on A11?
- running `twrp decrypt {pin}` doesn't seem to work. Unsure if there's something done to my lockscreen pin to be used as the encryption key/password?
When on Slot_A, attempting to boot into either the system or TWRP hangs.
Things I've tried:
Flashing A11 boot.img and magisk-patched boot.img to Slot_A -> Hangs on 1+ Spinning dots
Flashing A12 boot.img and magisk-patched boot.img to Slot_B -> Hangs on 1+ logo (Does show up on ADB though)
Booting Slot_B into TWRP 3.6.2 (Official, and Nebrassy unofficial for A12) and TWRP 3.7 -> Gets stuck on "Fastboot Mode" screen (fastboot cli still responds) or Hangs on snapdragon logo
Edit: Ended up using MSM. Needed device for work
I have a similiar problem to flash twrp to my phone ,
each time i try i get a fastboot loop too and i have to reset/unbrick it with the msm tool back to android 11
i use the OnePlus_7_Pro_Global_OxygenOS_11.0.5.1 package to unbrick the phone , i dont know how long and often i tried now to get twrp to work so that i can flash a custom fw ... i want root and a android 13 based cfw but i dont get it to work :/
I got it working with crdroid. heres some stuff
guacamole - Google Drive
drive.google.com
be carefull
¯\_(ツ)_/¯
------------------------------------
I got stable and decrypted fs RW working on crdroid 9.1 firmware other than some weird bugs
i put it in the 2023-twrp
MissAnthropin said:
I have a similiar problem to flash twrp to my phone ,
each time i try i get a fastboot loop too and i have to reset/unbrick it with the msm tool back to android 11
i use the OnePlus_7_Pro_Global_OxygenOS_11.0.5.1 package to unbrick the phone , i dont know how long and often i tried now to get twrp to work so that i can flash a custom fw ... i want root and a android 13 based cfw but i dont get it to work :/
Click to expand...
Click to collapse
I have the exact same problem! Have you found a fix yet? This seems to happen when I try to install Android 13 based roms, and when I install a rom like Lineage OS, using their recovery, it works just fine.
No, and I don't know why, maybe i do something wrong or it is the Modell that make this trouble.
I thinking to sell my OP7PRO and buy another one ( and then I have the same problem with the new phone )
No no let the jokes aside, it must work, i mailed with OnePlus Support Germany but they only helped me to install A11 w/root and recovery, i thought ok now I can update to A13 so I loaded A13, unpacked the boot.img, Patched the boot.img
Installed A13 w/out errors, rebooted - Fastboot loop
RIP
Started ranting instead
TWRP for guacamole development seems to be fairly scarce, last working recovery I tried was when they started using fastboot boot to enter it. It was pretty hacky even then, currently it seems that nebrassy is the maintainer for twrp for guacamole.
Github: https://github.com/nebrassy Android 12 thread: https://forum.xda-developers.com/t/recovery-12-official-teamwin-recovery-project.4269551/ Nebrassys Telegram has helpful info as well: https://t.me/NSSFB
last update I found was 2022:10:2 - https://www.pling.com/s/Phones/p/1835156
after a few days of torture I read a thread on here saying if you flashed twrp via magisk like you would if it was a magisk moule it would work normally. It worked on my device so I assume that its universal. I have filled my computer with guacamole related files Im uploading here before im forced to reinstall my os:
guacamole - Google Drive
drive.google.com
Just a fyi from what I have gathered from my experience you can get a stable twrp recovery with persistant / read write access and disabled encryption and basically use it with little error up until you try flashing a newer custom rom. My guess is when flashing a cfw the bootloader gets rewritten causing our boot image to become corrupted. Flashing twrp over / booting to twrp via fastboot or trying to install it via another custom recovery causes boot / recovery failures... meaning you cant really use it for flashing custom roms. I cant find the post with the install instructions I seen that helped me so here is what I think it was,
Found it: https://forum.xda-developers.com/t/how-to-make-twrp-work-in-your-stock-a12.4522667/#post-87985325
~ I have bricked this device constantly while ****ing around so unless youre prepared to go to war with the ****er, Id quit messing with it.
MSM flashing with windows is the only way to recover from the void.
Click to expand...
Click to collapse
using Linux systems for EDL is a bit more difficult to figure out but can be done > EDL https://github.com/bkerler/edl/blob/master/edl | https://github.com/andersson/qdl
Click to expand...
Click to collapse
~If you do brick I created a fastboot flashable A13 Oxygen os recovery rom and uploaded it to my google drive found under recovery_brick_fastboot.zip ~
Click to expand...
Click to collapse
lastly be mindful of a/b partition configuration or youll find yourself lost or bricked
Installation:
1. Obviously unlock the bootloader - OEM Unlock
2. Flash custom recovery (lineage/crdroid/etc)
3. (Personally I root here and again on the active slot so) flash magisk.zip
4. Reboot into installed ROM and install magisk android app and complete setup, reboot system
5. (another thing I like to do before flashing twrp) setup magisk enable all the basic options like prophide, deny list then set root userspace option to global.
6. Flash TWRP .zip (https://dl.twrp.me/guacamolev2/twrp-installer-3.7.0_12-0-guacamolev2.zip) via magisk
Alright! After all that you should be able to reboot into recovery via adb reboot recovery / fastboot or power menu and you find a working twrp recovery installed.
If you need help or want to **** around with the device you can @ me anytime and ill do my best to halp
2600 IRC (cornelius.scuttled.net >Nick captain >channel #guac)
Telegram https://t.me/+pxvpKToFo6pkMGYx
Discord https://discord.gg/MhvWgEfY
Pics
RolandStoner said:
Pics
Click to expand...
Click to collapse
You Confussing me a lot with your Posts before ...
i´m unsure what you mean exactly,
my bootloader is unlocked, with magisk i got a working root but after that i fail
what you mean with flash twrp with magisk ?
after unlocking the bootloader and get root, i tryd to flash twrp like before on other devices but that seems not working because i get then the fastboot loop
on another thread i found here on xda too, the guy wrote dont forget to activate the fastboot loop fix in the advanced options
but i not tried it yet again , so what should i do now ?
for now , i´m back on android11 , with stock oxygen os firmware
i have to do now the things like i did before again , unpack boot.img from the firmware that is installed on the device
patch it with magisk, flash it with "fastboot flash boot boot-patched.img" or is this step senseless ?
i mean you only wrote unlock bootloader and flash a cfw , but i don´t have a chance to flash a custom fw without a custom recovery ??
my recovery on my op7pro have no options for "install zip" or something else
addendum:
like i said you confused me a lot
addendum two:
or i do what i said before .. i sell my op7pro and buy me a one where i havent so much trouble installing twrp and root
i never had a phone before that made so much trouble in installing simple twrp ...
but i don´t found a phone yet that is compatible with kali and the pentest tools or wardriving tools like the oneplus , so i have a problem ,... i think i should drink now my selfmade blackberry liquor ( or blackberry booze ? ) and let the smartphone be a smartphone for now and power off my brain for a while
Yes, you need to patch your boot image via magisk and flash it with fastboot.
After you let magisk do its first time setup and then once it reboots you go to Magisk > Modules and flash the twrp recovery .zip file you got from twrp. link:https://twrp.me/oneplus/oneplus7pro.html just like you would if it was a magisk module.
the password for twrp decryption is your pin. Here are simpler instructions
https://forum.xda-developers.com/t/how-to-make-twrp-work-in-your-stock-a12.4522667/#post-87985325
****... I forgot a step.
after flashing twrp as a module in magisk you dont reboot, you go back to the main screen hit the install button and choose direct install
Now I understand it more, i had before rooted the phone successful with magisk, but then I made a wrong decision and booted into Fastboot and flashed TWRP in Fastboot Mode as I did it before with all my Smarties i had before, coz those way with Fastboot worked before all the time so I never thought that this is the error in the procedure
I give the twrp flashing with magisk a try.
Thx for the help
MissAnthropin said:
Now I understand it more, i had before rooted the phone successful with magisk, but then I made a wrong decision and booted into Fastboot and flashed TWRP in Fastboot Mode as I did it before with all my Smarties i had before, coz those way with Fastboot worked before all the time so I never thought that this is the error in the procedure
I give the twrp flashing with magisk a try.
Thx for the help
Click to expand...
Click to collapse
Thank @yassine2217 because I would never have done so either.... Still many bugs but twrp is twrp