I was on MIUI 11
then flashed PE 10
then reverted back to MIUI 11 again.
and all the sensors stopped working
I saw 2-3 threads with same issue.
so,anyone found solution for this now ??
or flashing PE 10 again is only option ???
Flash the Fastboot version of MIUI
Greyjawripper said:
Flash the Fastboot version of MIUI
Click to expand...
Click to collapse
already flashed 2 times !
still no luck
rasik107 said:
already flashed 2 times !
still no luck
Click to expand...
Click to collapse
U read this?
Look on the last posts
https://forum.xda-developers.com/redmi-note-7-pro/help/sensors-t4012069
joke19 said:
U read this?
Look on the last posts
https://forum.xda-developers.com/redmi-note-7-pro/help/sensors-t4012069
Click to expand...
Click to collapse
I flashed MIUI 10 fastboot ROM and then updated it to MIUI 11...
all good now :good:
Fix All Sensors+Back to Stock MIUI 11 From Any android 10 Rom .
rasik107 said:
I was on MIUI 11
then flashed PE 10
then reverted back to MIUI 11 again.
and all the sensors stopped working
I saw 2-3 threads with same issue.
so,anyone found solution for this now ??
or flashing PE 10 again is only option ???
Click to expand...
Click to collapse
PHONE : REDMI NOTE 7 PRO Violet
I had same Problem on 29Feb2020 . I lost all my sensors when i flashed
stock MIUI 11 fastboot rom from Pixel Experience 10 via Miflashtool ( even witth cmd) .
Solution is What i found here Only is That :
UPDATED ON 14 NOV 2020
FLASH persist.img from official fastboot rom via ORANGE FOX RECOVERY ...
This Method works perfectly fine ..i lost my sensors 3 times fixed 2times with this method ..
Below method was very old when i didn't knew about persist amd ofcourse its lengthy ...
Only Updated Underlined Part !
1. Flash Miui 10 anybuild [ V10.2.7.0.PFHINXM ] (i used this build)
from this Site : http://c.mi.com/thread-2201715-1-1.html
2. Flash Via MiFlashtool (same method official one , fastboot rom via flashtool )
IF U WANT TO KEEP BOOTLOADER UNLOCKED THEN SELECT OPTION " clean all" !
and if you want to lock bootloader then select " clean all and lock" ! I KEPT MY BOOTLOADER UNLOCKED !
3. within 250seconds , You will Boot To System Sucessfully !
4. Download CPU-Z app and Verify Sensors Working or Not ! ( mine worked )
5. Now You will get Notification of MIUI 11 Update !
6. Update To MIUI 11 . withing 5 min your device will boot to MIUI 11 Sucessfully !
7. Again Verify All sensors using CPU-Z app ( Mine Worked )
8. And Be Sure to Give a Like if it Worked for You , That's how i will know how many people i helped
kankurcool said:
PHONE : REDMI NOTE 7 PRO Violet
I had same Problem on 29Feb2020 . I lost all my sensors when i flashed
stock MIUI 11 fastboot rom from Pixel Experience 10 via Miflashtool ( even witth cmd) .
Solution is What i found here Only is That :
1. Flash Miui 10 anybuild [ V10.2.7.0.PFHINXM ] (i used this build)
from this Site : http://c.mi.com/thread-2201715-1-1.html
2. Flash Via MiFlashtool (same method official one , fastboot rom via flashtool )
IF U WANT TO KEEP BOOTLOADER UNLOCKED THEN SELECT OPTION " clean all" !
and if you want to lock bootloader then select " clean all and lock" ! I KEPT MY BOOTLOADER UNLOCKED !
3. within 250seconds , You will Boot To System Sucessfully !
4. Download CPU-Z app and Verify Sensors Working or Not ! ( mine worked )
5. Now You will get Notification of MIUI 11 Update !
6. Update To MIUI 11 . withing 5 min your device will boot to MIUI 11 Sucessfully !
7. Again Verify All sensors using CPU-Z app ( Mine Worked )
8. And Be Sure to Give a Like if it Worked for You , That's how i will know how many people i helped
Click to expand...
Click to collapse
Lol did u tried locking bootloader ? i heard it will give u system destroyed.
rasik107 said:
I flashed MIUI 10 fastboot ROM and then updated it to MIUI 11...
all good now :good:
Click to expand...
Click to collapse
How to update miui 10 to miui 11
rb.fzdup said:
How to update miui 10 to miui 11
Click to expand...
Click to collapse
check for updates in settings.
Could you plz explain how to flash miui 10 using miflash?thnks in advanced
---------- Post added at 04:10 PM ---------- Previous post was at 03:41 PM ----------
kankurcool said:
PHONE : REDMI NOTE 7 PRO Violet
I had same Problem on 29Feb2020 . I lost all my sensors when i flashed
stock MIUI 11 fastboot rom from Pixel Experience 10 via Miflashtool ( even witth cmd) .
Solution is What i found here Only is That :
1. Flash Miui 10 anybuild [ V10.2.7.0.PFHINXM ] (i used this build)
from this
2. Flash Via MiFlashtool (same method official one , fastboot rom via flashtool )
IF U WANT TO KEEP BOOTLOADER UNLOCKED THEN SELECT OPTION " clean all" !
and if you want to lock bootloader then select " clean all and lock" ! I KEPT MY BOOTLOADER UNLOCKED !
3. within 250seconds , You will Boot To System Sucessfully !
4. Download CPU-Z app and Verify Sensors Working or Not ! ( mine worked )
5. Now You will get Notification of MIUI 11 Update !
6. Update To MIUI 11 . withing 5 min your device will boot to MIUI 11 Sucessfully !
7. Again Verify All sensors using CPU-Z app ( Mine Worked )
8. And Be Sure to Give a Like if it Worked for You , That's how i will know how many people i helped
Click to expand...
Click to collapse
Hey could you please explain it in detail
Flash Presist.img using Orangefox recovery then your got all sensors back, But no L1 certificate its back to L3
Thanks brother it worked. My device sensors where not working after coming back to miui 11 from pixel rom.
Sensors not working after flashing rom.
Well,
After flashing the correct rom.
If sensors not working in the device..
Solution -1)
>Just Restart the device.
Solution 2)
>Even though if it's not working, then try resetting the device.
>Final Solution Believe me this will work:
So, initially.
Step 1: install twrp in recovery.
Step 2: Flash Orange Fox Recovery through twrp.
Step 3: Now Download the MIUI Rom of your respective device.
Step 4: simply search persist.img and find it inside of that downloaded miui rom.
Step 5: copy it and paste it in the internal storage of your mobile.
Step 6: Now go to recovery by pressing power button and volume+ button.
Step 7: Flash that Persist.img in partition mode.
Select reboot to reboot your device.
Enjoy ?
PavanTechKing said:
Well,
After flashing the correct rom.
If sensors not working in the device..
Solution -1)
>Just Restart the device.
Solution 2)
>Even though if it's not working, then try resetting the device.
>Final Solution Believe me this will work:
So, initially.
Step 1: install twrp in recovery.
Step 2: Flash Orange Fox Recovery through twrp.
Step 3: Now Download the MIUI Rom of your respective device.
Step 4: simply search persist.img and find it inside of that downloaded miui rom.
Step 5: copy it and paste it in the internal storage of your mobile.
Step 6: Now go to recovery by pressing power button and volume+ button.
Step 7: Flash that Persist.img in partition mode.
Select reboot to reboot your device.
Enjoy
---------- Post added at 12:26 PM ---------- Previous post was at 12:24 PM ----------
hackermssharma said:
PavanTechKing said:
Well,
After flashing the correct rom.
If sensors not working in the device..
Solution -1)
>Just Restart the device.
Solution 2)
>Even though if it's not working, then try resetting the device.
>Final Solution Believe me this will work:
So, initially.
Step 1: install twrp in recovery.
Step 2: Flash Orange Fox Recovery through twrp.
Step 3: Now Download the MIUI Rom of your respective device.
Step 4: simply search persist.img and find it inside of that downloaded miui rom.
Step 5: copy it and paste it in the internal storage of your mobile.
Step 6: Now go to recovery by pressing power button and volume+ button.
Step 7: Flash that Persist.img in partition mode.
Select reboot to reboot your device.
Enjoy
Click to expand...
Click to collapse
U lost ur L1 certificate forever man. Instead flash miui 10 rom from miflash and update to miui 11 via updater app.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Did exactly what you write.. flashed MIUI 10 with MiFlash and relocked. Then update to MIUI 11 and then 12.. but sensors not working.... Any other idea?
Related
I had a Xperia L, its pretty old now but i wanted to do something with it like trying out Android Nougat feel on Xperia L
So i googled much (I don't have much knowledge in phones and flashing), I tried installing this https://forum.xda-developers.com/xperia-l/orig-development/rom-cyanogenmod-14-alpha-1-t3469162
Lineage OS on Xperia L(taoshan) by corphish
I read few of the blog posts about flashing a custom rom on Xperia L, and I got to know that the steps to install a custom rom are:
1. Root your phone
2. Unlock Bootloader
3. Install TWRP/CWM or some custom recovery
4. Flash the rom from SD Card or Internal Storage(Clear Cache, DALVIK CACHE obv)
I did root my phone with KingRoot APK
Did unlock bootloader with the official SONY Technique, but the thing happened was my phone went into a bootloop (boot animation didn't stop) although i fixed it by flashing the official stock ftf and when i turned my device on my Root and Bootloader was gone again
Could someone recommend me a solution to this issue
(Might be a way to directly flash the lineage rom from the PC/or some flasher app which takes all the load to flash a rom/
Or just a possible fix)
Thanks ! (In Advance)
~Haji
Hi Haji joon
Maybe you should try unlocking your bootloader with flashtool v0.9.18.4 , Then turn off your phone.
Then extract the "boot.img" file from the custom ROM's zip file and use adb&fastboot (you can get it from here: https://androiddatahost.com/bnjkh ) then copy boot.img file to the installation folder of adb&fastboot and connect your phone in fastboot mode (volume up + connect to pc) and type the command below, in fastboot app:
" fastboot flash boot boot.img "
Now you can turn on your phone and press volume up to enter recovery, and install any custom ROM you want
Kungfu73 said:
Hi Haji joon
Maybe you should try unlocking your bootloader with flashtool v0.9.18.4 , Then turn off your phone.
Then extract the "boot.img" file from the custom ROM's zip file and use adb&fastboot (you can get it from here: ) then copy boot.img file to the installation folder of adb&fastboot and connect your phone in fastboot mode (volume up + connect to pc) and type the command below, in fastboot app:
" fastboot flash boot boot.img "
Now you can turn on your phone and press volume up to enter recovery, and install any custom ROM you want
Click to expand...
Click to collapse
Thanks but have you tried this method ? (also the boot.img you were referring to do you mean the boot.img of the recovery?)
Yes!
LordHaji said:
Thanks but have you tried this method ? (also the boot.img you were referring to do you mean the boot.img of the recovery?)
Click to expand...
Click to collapse
In order to flash Nougat ROM, you must have latest TWRP recovery (v 3.0.2 for xperia L)
So, you should either flash TWRP image or the boot.img of any Nougat rom( because they have latest TWRP in them) and flashing boot.img is somehow safer in xperia L (but no difference in them)
And about boot.img, it is in the ROM file that you've downloaded. For example, in Lineage rom's zip installation file, there's a file named boot.img . You should extract and use it in the process I've said before.
And if anywhere you encounter with a problem, simply you can flash stock ROM and start again
And sorry for my long post!
Kungfu73 said:
In order to flash Nougat ROM, you must have latest TWRP recovery (v 3.0.2 for xperia L)
So, you should either flash TWRP image or the boot.img of any Nougat rom( because they have latest TWRP in them) and flashing boot.img is somehow safer in xperia L (but no difference in them)
And about boot.img, it is in the ROM file that you've downloaded. For example, in Lineage rom's zip installation file, there's a file named boot.img . You should extract and use it in the process I've said before.
And if anywhere you encounter with a problem, simply you can flash stock ROM and start again
And sorry for my long post!
Click to expand...
Click to collapse
Final Query are you sure that the ROM i linked in has TWRP & could you tell me bout the best Xperia L Kernel ?
LordHaji said:
Final Query are you sure that the ROM i linked in has TWRP & could you tell me bout the best Xperia L Kernel ?
Click to expand...
Click to collapse
Actually, I'm not sure about Lineage 14.1, because I've only tested it on RR Rom. But you can simply test it with no worries! Or just use the first method that I've told you before.
And about kernel, unfortunately there is no usable kernel developed for XL Nougat ROMs till now :crying: . You should use the ROM's default one.
..
Kungfu73 said:
Actually, I'm not sure about Lineage 14.1, because I've only tested it on RR Rom. But you can simply test it with no worries! Or just use the first method that I've told you before.
And about kernel, unfortunately there is no usable kernel developed for XL Nougat ROMs till now :crying: . You should use the ROM's default one.
Click to expand...
Click to collapse
Ok, can you give me the download URL for latest RR for XL ?
(I don't think its 7.1.1 yet) @Kungfu73
LordHaji said:
Ok, can you give me the download URL for latest RR for XL ?
(I don't think its 7.1.1 yet) @Kungfu73
Click to expand...
Click to collapse
Here you are:
https://www.androidfilehost.com/?fid=745425885120743168
Use this one. It's latest stable version of RR 7.1.2 ROM (2017/06/20). It has no bugs (but install some other file managers, default one can't access sdcard0)
There was a problem in last one (2017/07/06) but developer is working on it and maybe release an update soon ( I hope).
So I'll try it out today with the boot.img of the RR rom
Also for the ROM updates do i need it flash it again or is there some OTA updating feature ?
Ok, I again did unlock the bootloader and its in bootloop state again, will i start the flash mode (volume down + usb cable insert) and then load the boot.img of RR with
" fastboot flash boot boot.img " ?
Then i can power + volume up to start TWRP and install it right ?
LordHaji said:
So I'll try it out today with the boot.img of the RR rom
Also for the ROM updates do i need it flash it again or is there some OTA updating feature ?
Click to expand...
Click to collapse
Although there is an OTA update center, but it doesn't show latest updates! So you should check here in forum for updates!
---------- Post added at 06:24 AM ---------- Previous post was at 06:05 AM ----------
LordHaji said:
Ok, I again did unlock the bootloader and its in bootloop state again, will i start the flash mode (volume down + usb cable insert) and then load the boot.img of RR with
" fastboot flash boot boot.img " ?
Then i can power + volume up to start TWRP and install it right ?
Click to expand...
Click to collapse
No, you should press volume up and use fastboot mode to flash boot.img
Then type fastboot reboot and disconnect cable and press volume up when LED lights on.
Also, for recovery mode do i need to press the volume up button continuously or just long press it
LordHaji said:
Also, for recovery mode do i need to press the volume up button continuously or just long press it
Click to expand...
Click to collapse
Quickly pressing one time when phone vibrates is enough, but it's better to press 2-4 times continuously.
.
.
MIFLASH METHOD
Downloads:
MiFlash 2018
Prog Emmc Firehose ELF(Patched) Credits: Chocoml
Any ARB4 fastboot rom:
Global: http://bigota.d.miui.com/V9.6.4.0.O...FD_20180828.0000.00_8.1_global_f5ee62becf.tgz
China: http://bigota.d.miui.com/V10.0.1.0....EICNFH_20180821.0000.00_8.1_cn_7a9c72f518.tgz
1. Download and Extract fastboot rom folder. You can use any latest fastboot rom. If you have Global variant use Global fastboot rom and if China variant use China fastboot rom to prevent being stucked on recovery (Miui version can't be installed in this device).
2. Download and Replace prog_emmc_firehose_Sdm660_ddr.elf with the patched file above in the fastboot images folder.
3. Try to power cycle phone. Hold Power button for about 20-30 secs or longer. Or try any button combinations. (HOLD Power + VolDOWN) or (Power + VolUP), or (Power + VolDOWN + VolUP).
4. Connect phone to PC, open MIFLASH, load the fastboot folder.
5. Select CLEAN ALL and flash.
6. How to flash with MIFlash
QFIL/QPST METHOD
Downloads:
QPST/QFIL
Prog Emmc Firehose MBN(Patched) Credits: Chocoml
Any ARB4 fastboot rom:
Global: http://bigota.d.miui.com/V9.6.4.0.O...FD_20180828.0000.00_8.1_global_f5ee62becf.tgz
China: http://bigota.d.miui.com/V10.0.1.0....EICNFH_20180821.0000.00_8.1_cn_7a9c72f518.tgz
1. Download and install QPST.
2. Download and Extract fastboot rom folder. You can use any latest fastboot rom. If you have Global variant use Global fastboot rom and if China variant use China fastboot rom to prevent being stucked on recovery (Miui version can't be installed in this device).
3. Download patched prog_emmc_firehose_Sdm660_ddr.mbn and copy inside fastboot rom images folder.
4. Try to power cycle phone. Hold Power button for about 20-30 secs or longer. Or try any button combinations. (HOLD Power + VolDOWN) or (Power + VolUP), or (Power + VolDOWN + VolUP).
5. Connect phone to PC, Run QFIL from bin folder, select Flat Build (prog_emmc_firehose_Sdm660_ddr.mbn), Load XML (rawprogram0.xml), (patch0.xml) and click Download.
6. How to flash with QFIL
** TROUBLESHOOTING **
1. If with "Write time out, maybe the device was disconnected" or "cannot receive hello packet" error on MIFlash. Disconnect phone from pc and hold power button again for 20-30 seconds. Reconnect to pc and try again.
2. If with "YOU ARE NOT AUTHORIZED TO DOWNLOAD" error on MIFLASH or 'Only nop and sig tag can be received before authentication' on QFIL, try to power cycle again OR hold those buttons while connecting it to PC. Try every combo and flash again.
3. If all failed then Remove back cover of the phone, do a testpoint. If it still doesn't work Disconnect the battery connector.
4. How to testpoint RMN5 .
.
.
devcon69 said:
.
For people with bricked devices due to ARB and unable to flash with the anti note 5 bypass fastboot rom (authentication failed).
You can try to use QFIL (QPST) as someone has successfully fixed it using QFIL.
http://en.miui.com/thread-3839818-1-1.html
DOWNLOADS
QPST/QFIL: https://www.androidbrick.com/downlo...alcomm-flasher-qfil-qpst-2-7-472/?wpdmdl=9343
Prog firehose: http://www.mediafire.com/file/924uilw13kx9ujr/prog_emmc_firehose_Sdm660_ddr.mbn/file Credits: Choco
Fastboot ROM
Global: http://bigota.d.miui.com/V9.6.4.0.O...FD_20180828.0000.00_8.1_global_f5ee62becf.tgz
China: http://bigota.d.miui.com/V10.0.1.0....EICNFH_20180821.0000.00_8.1_cn_7a9c72f518.tgz
1. Download and install QPST.
2. Download and Extract fastboot rom folder. If you have global variant use global fastboot rom and if china variant use china fastboot rom to prevent being stucked on recovery (miui version can't be installed in this device)
3. Download prog_emmc_firehose_Sdm660_ddr.mbn and copy inside fastboot rom images folder.
4. Run QFIL from bin folder, select Flat Build (prog_emmc_firehose_Sdm660_ddr.mbn), Load XML (rawprogram0.xml), (patch0.xml) and click Download.
How to flash vid
https://www.youtube.com/watch?v=H2z9GRXNhKE
.
Click to expand...
Click to collapse
People confirming it to be working?
Sent from my Redmi Note 5 Pro using Tapatalk
Kapiljhajhria said:
People confirming it to be working?
Sent from my Redmi Note 5 Pro using Tapatalk
Click to expand...
Click to collapse
Yes it worked for some
I was able to unbrick it using the qpst/qfil method, but I had to open the back lid and disconnect the battery. MiFlash didn't work for me..
Btw I have the note 5 ai and unlocked bootloader.
Thanks for posting this
Thanks
Update: USERS with (You are not authorized to download) error CONFIRMED that the antibypass fastboot rom worked with Miflash by forcing edl/testpoint again or by flashing with the battery connector Disconnected.
I tried rom from here shared by friend,,,,
It is not work it said you are not authorized to download, i tried many many times is not work. Always same error,,,,
Until I read force edl, i try open with guitar pick my phone,,,,
And success!!!!!!
My phone not working for 4 weeks because I have miui pro install and i flash old miui version and it dead,,,,
Thank you so much!!!! Greetings from Romania!!! BunΔ ziua!!!
Successfully !! Thanks dev !
This thread is awesome already fix arb hardbrick with flash testpoint using qfil ! I hve been waiting for a month and already try many way from another thread but still get "unauthorized acc" but this only one is success ! Btw my phone is redmi note 5(ai , china) and now already using miui 10 eu rom . Thanks dev !
Updated:
Kishan_22 said:
I was able to unbrick it using the qpst/qfil method, but I had to open the back lid and disconnect the battery. MiFlash didn't work for me..
Btw I have the note 5 ai and unlocked bootloader.
Thanks for posting this
Click to expand...
Click to collapse
AJphatia_0 said:
I tried rom from here shared by friend,,,,
It is not work it said you are not authorized to download, i tried many many times is not work. Always same error,,,,
Until I read force edl, i try open with guitar pick my phone,,,,
And success!!!!!!
My phone not working for 4 weeks because I have miui pro install and i flash old miui version and it dead,,,,
Thank you so much!!!! Greetings from Romania!!! BunΔ ziua!!!
Click to expand...
Click to collapse
akml3 said:
This thread is awesome already fix arb hardbrick with flash testpoint using qfil ! I hve been waiting for a month and already try many way from another thread but still get "unauthorized acc" but this only one is success ! Btw my phone is redmi note 5(ai , china) and now already using miui 10 eu rom . Thanks dev !
Click to expand...
Click to collapse
Wow great.
I Want remove fake ubl now..
UtkuAblak said:
I Want remove fake ubl now..
Click to expand...
Click to collapse
Download China fastboot rom replace with patched prog emmc hose. Force edl/testpoint and flash.
I want to find an effective method unbrick , i'm get my phone brick .
testing miflash encounter NOT AUTHORIZED , QPST error firehose .
i'm comfirmed "Remove the back cover of your phone , do a testpoint , disconnect the battery connector " work perfect with Miflash , not message AUTHORIZED.. is the last solution and result
devcon69 said:
Download China fastboot rom replace with patched prog emmc hose. Force edl/testpoint and flash.
Click to expand...
Click to collapse
Thanks , i will try now
UtkuAblak said:
Thanks , i will try now
Click to expand...
Click to collapse
Did it work?
Noob question: Can I use this method to flash device with fake UBL? I'm on v9.6.4.0
dheemiz said:
Noob question: Can I use this method to flash device with fake UBL? I'm on v9.6.4.0
Click to expand...
Click to collapse
I wont recommend using this to flash on your fake ubl device. I would if it was bricked but it's not. You could still apply for the official one. It's more safe.
devcon69 said:
I wont recommend using this to flash on your fake ubl device. I would if it was bricked but it's not. You could still apply for the official one. It's more safe.
Click to expand...
Click to collapse
So it possibly wouldn't work with my fully functional arb4 device with fake ubl then? Unfortunately I don't have authorized account to remove fake ubl. Lol really despise xiaomi for their arb d**k move.
dheemiz said:
So it possibly wouldn't work with my fully functional arb4 device with fake ubl then? Unfortunately I don't have authorized account to remove fake ubl. Lol really despise xiaomi for their arb d**k move.
Click to expand...
Click to collapse
You could try this if you insist.
https://forum.xda-developers.com/re...-fix-fake-ubl-arb4-devices-t3843806?nocache=1
Thanks @devcon69 I unbricked redmi note 5 pro with MIFLASH method. I didn't required Testpoint/Force EDL it was already on it when ever i connected it to pc. I also recovered data by selecting save user data option. I was on 10.0.1.0 global stable with arb3 and played with .edl files from developers rom so bricked and now on arb4.
Hello I was trying to install a rom from xiaomi.eu on my device, I did not make a backup and I delete all the content, now it does not pass the fastboot mode, but I can not flash a rom with miflash because it appears to me that the rom does not have all .dat files, please help me:crying:
Solved
dermpuma said:
Hello I was trying to install a rom from xiaomi.eu on my device, I did not make a backup and I delete all the content, now it does not pass the fastboot mode, but I can not flash a rom with miflash because it appears to me that the rom does not have all .dat files, please help me:crying:
Click to expand...
Click to collapse
Solved with
FASTBOOT ROM
https://en.miui.com/a-234.html
AND
xiaomiflash 2017.4.25.0
REBOOT ERROR ROM BUT YOU UNLOCK BOOTLOADER AND ENJOY
SORRY MY BAD ENGLISH
THANKS
U used a flashboot ROM via Mi Flash to fix this right? Whole applying the clean all.bat setting?
I had the same prob and this fixed it. But doing so reset my recovery :/
dermpuma said:
Hello I was trying to install a rom from xiaomi.eu on my device, I did not make a backup and I delete all the content, now it does not pass the fastboot mode, but I can not flash a rom with miflash because it appears to me that the rom does not have all .dat files, please help me:crying:
Click to expand...
Click to collapse
Hello , don't worry !
First download this : https://bigota.d.miui.com/V10.2.10....FHINXM_20190424.0000.00_9.0_in_56ff3e7dd2.tgz
After that extract it , and connect your phone to PC ( make sure you have all the drivers needed ) in fastboot mode ( for this turn off your device , and hold power with volume down ) , and use " flash_all_except_data_storage.bat " , this will repair your corrupt system ! WITHOUT LOSSING DATA
After all of this , you will be able to boot your device !
Flash this TWRP : https://forum.xda-developers.com/re...ficial-3-2-3-redmi-note-6-pro-violet-t3912400 or use another (but from my experince , anothers twrp will not work ), aftersuccesfully booted in recovery , you can do whatever you like
Give a like , if I helped you
bootloader is locked error occuer
mathan7 said:
bootloader is locked error occuer
Click to expand...
Click to collapse
What happened?
For some unknown reasons, I brick my phone too after flashing magisk on stock ROM 10.3.7. At first I'm getting bootloop. Then decided to just drop magisk and reflash stock ROM again. Then I encountered an error. Hopefully this method will work.
Naveenthemi said:
What happened?
Click to expand...
Click to collapse
problem solved. goto fastboot mode again unlock via miunlock
mathan7 said:
problem solved. goto fastboot mode again unlock via miunlock
Click to expand...
Click to collapse
Ah yes
format data once via twrp
diamantik said:
Hello , don't worry !
First download this : https://bigota.d.miui.com/V10.2.10....FHINXM_20190424.0000.00_9.0_in_56ff3e7dd2.tgz
After that extract it , and connect your phone to PC ( make sure you have all the drivers needed ) in fastboot mode ( for this turn off your device , and hold power with volume down ) , and use " flash_all_except_data_storage.bat " , this will repair your corrupt system ! WITHOUT LOSSING DATA
After all of this , you will be able to boot your device !
Flash this TWRP : https://forum.xda-developers.com/re...ficial-3-2-3-redmi-note-6-pro-violet-t3912400 or use another (but from my experince , anothers twrp will not work ), aftersuccesfully booted in recovery , you can do whatever you like
Give a like , if I helped you
Click to expand...
Click to collapse
Hi, the bat file won't open! the one you mentioned, can you help me link me to a noob friendly forum? I'm uncertain exactly what step i am missing.
Thanks!!
DONE!!! i managed to do it so thanks really
I have same prblm and now my device not showing in fastboot mode i mean i go in fastboot mode and connect device to my lappi then my device not showing when I command fastboot devices please help urgent
---------- Post added at 07:34 PM ---------- Previous post was at 06:42 PM ----------
harryagg said:
Hi, the bat file won't open! the one you mentioned, can you help me link me to a noob friendly forum? I'm uncertain exactly what step i am missing.
Thanks!!
DONE!!! i managed to do it so thanks really
Click to expand...
Click to collapse
please bro help I m trouble in same situation How ugh solve this
yuvi15 said:
I have same prblm and now my device not showing in fastboot mode i mean i go in fastboot mode and connect device to my lappi then my device not showing when I command fastboot devices please help urgent
---------- Post added at 07:34 PM ---------- Previous post was at 06:42 PM ----------
please bro help I m trouble in same situation How ugh solve this
Click to expand...
Click to collapse
Install adb and fastboot drivers if still not detected check your usb cable.
You need internet on your laptop.
Hello. I have a redmi note 7 pro that died after updating to version 10.3.13 global version. it seems that this version came with antirollback. the phone came with the bootloader unlocked and I had installed twrp and root on it, and I didn't manage to associate it with my account. after updating, I tried to install an older version because I could not install twrp but unfortunately I left the check all and lock checked. so I opted for a dead phone with a locked bootloader and that didn't let me install an older version than 10.3.13. unfortunately the phone I think is the Chinese version and had an unofficial version installed by my global seller. after installing version 10.3.13 it tells me that this version of miui cannot be installed on this device. can anyone help me revive him?
My phone got bricked redme note 7 pro ,I tried with flash tool echo mismatch it's getting error what is the problem which rom i need
Anyone can tell how much service center charges to unbrick via edl mode?
diamantik said:
Hello , don't worry !
First download this : https://bigota.d.miui.com/V10.2.10....FHINXM_20190424.0000.00_9.0_in_56ff3e7dd2.tgz
After that extract it , and connect your phone to PC ( make sure you have all the drivers needed ) in fastboot mode ( for this turn off your device , and hold power with volume down ) , and use " flash_all_except_data_storage.bat " , this will repair your corrupt system ! WITHOUT LOSSING DATA
After all of this , you will be able to boot your device !
Flash this TWRP : https://forum.xda-developers.com/re...ficial-3-2-3-redmi-note-6-pro-violet-t3912400 or use another (but from my experince , anothers twrp will not work ), aftersuccesfully booted in recovery , you can do whatever you like
Give a like , if I helped you
Click to expand...
Click to collapse
Great it worked
This is for POCO F1 users who have softbricked their phones and now stuck on Oreo. If they flash any other rom it will simply go to fastboot rather than booting. Just follow the below steps to fix yours.
Step 1 : Root your Oreo rom using magisk.
Step 2 : Boot into rom and install Lanthanum System toolbox
Step 3 : Open the app and give root privileges
Step 4 : Go to menu and scroll to partion settings
Step 5 : Scroll to dtbo
Step 6 : Click on it and select flash
Step 7 : Select the dtbo.img attached and flash it. ( If you get trouble while selecting or if it's crashing select from another file explorer.)
Step 8 : Reboot and then you can flash any rom like you used to.
Thanks a lot mate ! It Worked
bro im not able to install aex 8.0 A11 please help me
Fall3nSama3l said:
This is for POCO F1 users who have softbricked their phones and now stuck on Oreo. If they flash any other rom it will simply go to fastboot rather than booting. Just follow the below steps to fix yours.
Step 1 : Root your Oreo rom using magisk.
Step 2 : Boot into rom and install Lanthanum System toolbox
Step 3 : Open the app and give root privileges
Step 4 : Go to menu and scroll to partion settings
Step 5 : Scroll to dtbo
Step 6 : Click on it and select flash
Step 7 : Select the dtbo.img attached and flash it. ( If you get trouble while selecting or if it's crashing select from another file explorer.)
Step 8 : Reboot and then you can flash any rom like you used to.
Click to expand...
Click to collapse
thank you so much bro finally im able to install a custom rom . i installed dtbo.img by fastboot method
Babu4886 said:
thank you so much bro finally im able to install a custom rom . i installed dtbo.img by fastboot method
Click to expand...
Click to collapse
How?
rdjaat said:
How?
Click to expand...
Click to collapse
Just flash through fastboot command "fastboot flash dtbo dtbo.img" simple. You don't need to first flash Oreo rom or root device .I simply flashed it by fastboot and then installed twrp then flashed a custom rom corvus os 10.5
Babu4886 said:
Which firmware are u using
Click to expand...
Click to collapse
Corvus os
Babu4886 said:
Corvus os
Click to expand...
Click to collapse
bro i did the same my phone was stuck on permanent fastboot but when i try to flash miui 12.0.3 ofiicial through twrp or mi flash tool error comes which never did and i want to go to stock rom as i need to sell my phone
Previously my cellphone was in a custom ROM, I installed a module that used dtbo in it, while my cellphone didn't support it, finally my cellphone could live with the MIUI ROM
10 android 8(oreo), can I use the method above to use a custom rom again?
PanjiAja03 said:
Previously my cellphone was in a custom ROM, I installed a module that used dtbo in it, while my cellphone didn't support it, finally my cellphone could live with the MIUI ROM
10 android 8(oreo), can I use the method above to use a custom rom again?
Click to expand...
Click to collapse
https://t.me/poors_i_fone/165994 Here Download this dtbo.img
Download platform tools if using windows 7 or higher
open cmd
put phone in fastboot mode
type: 'fastboot flash dtbo dtbo.img'
this will fix everything... just reboot device
and make sure you dont end up flashing some trash files for your device... and fix this issue via edl or paying to xyz people. stay safe!
lakshhhhhh said:
https://t.me/poors_i_fone/165994 Here Download this dtbo.img
Download platform tools if using windows 7 or higher
open cmd
put phone in fastboot mode
type: 'fastboot flash dtbo dtbo.img'
this will fix everything... just reboot device
and make sure you dont end up flashing some trash files for your device... and fix this issue via edl or paying to xyz people. stay safe!
Click to expand...
Click to collapse
is it possible to flash the dtbo.img file after flashing the twrp and install the custom rom?
PanjiAja03 said:
is it possible to flash the dtbo.img file after flashing the twrp and install the custom rom?
Click to expand...
Click to collapse
bro is your phone stuck on fastboot completely?? dm me at telegram
π£π₯ππππ§π’π₯ π’π¦β’ | π£π’ππ’ π1
π₯PREDATOR OS = GAMING + BBπ₯ #POCO F1 (Beryllium) CUSTOM ROMS (MODS + PORT) Got Banned Join - @SorryIDidWrong Join Our Official Channel @predators_hotlist For Logs Join @logs_of_poors_i_fone
t.me
[AIO Guide] Bootloader unlocking, Root ,Twrp , Custom Rom & Stock Firmware]β NOTE :unlocking bootloader wipe your data
Root at your own risk
I am not responsible for any data loss or brick
# Twrp recovery for hot 9 play
Device- Infinix Hot 9 play
Model & Variant :
1: X680B
2: X680F
3: X680
1.Bootloader Unlocking Guide:
1. Download & install ADB driver
2.Enable devloper mode by taping on Build verson(setting->my phone) then enable Oem Unlock & usb debugging from (settings->System->Devloper option)
3.Now connect device & open ADB path & run cmd
command: ADB devices
then reboot to bootloader
command: ADB reboot bootloader
4. unlock bootloader
command: fastboot flashing unlock the phone will ask to confirm
5. now reboot to system
command:fastboot reboot
If you are stuck waiting for the device screen
2.1 TWRP [Official]
https://forum.xda-developers.com/t/custom-recovery-infinix-hot-9.4462331/
3. Root:
## Root zip link: Magisk-v21.0.zip
## Unroot link : Magisk-uninstaller-20201003.zip
4. Orange state disabler:
Flashing guide & zip file
Click Wipe βFormat Data β Yes β Press Enter.
Then Click Reboot β Recovery (Reboot to Recovery ).
After this, TWRP Recovery Mode will be installed on your phone
Link::Orange disabler.zip
5. Gsi Rom / Custom Rom Install guide & link:
https://forum.xda-developers.com/t/custom-rom-dynamic-partition-arm64-ab.4379341/
6. Phone Hard Brick fix / Flashing guide & tools :
https://forum.xda-developers.com/t/phone-soft-brick-phone-on-off-poblem-tecno-device.4378501/
6.1. Stock Firmware Files / Flash file
## Download link :
01 : X680B ( Variant ) :
X680B-H6215EFIJ-Q-OP-211130V265
X680B-H6215EFIJ-Q-OP-211015V263
X680B-H6215EFIJ-Q-OP-210804V255
X680B-H6215EFIJ-Q-OP-220215V277
02 : X680F ( Variant ) :
X680F-H6116P-Q-OP-210313V223
X680F-H6116P-Q-OP-200826V98
03 : X680 ( Variant ) :
X680-H6116DE-QGo-OP-200521V290
Hit Thanks If You Liked My Work
Thanks mate, my x680b was already rooted and I've been waiting for a custom recovery for almost a year. Searching on Google, Hovatech, and XDA time to time and finally yesterday I saw your post. The recovery works . Hopefully we'll see Android 12 for x680b too .
immi said:
Thanks.
Click to expand...
Click to collapse
gsi install gruide & link : page link
recommend:v400.e PixelExperience_arm64-ab-12.0-20211226-UNOFFICIAL
Parvej789 said:
gsi install gruide & link : page link
recommend:v400.e PixelExperience_arm64-ab-12.0-20211226-UNOFFICIAL
Click to expand...
Click to collapse
Thanks for more info but I think x680b is A only (not AB). Recommend a gsi that you've tested personally (if you have tested any)
EDIT: Also if you have any flashable to remove Orange State at boot would be a great favour.
EDIT 2: TWRP is unable to backup current rom or flash any .zip cause it can't access internal storage or mount partitions.
immi said:
Thanks
Click to expand...
Click to collapse
tested post
dynamic TWRP recovery fully does not work. Because your phone is super.img partition(System Product vendor not r w). any img file flash and buckup working. This phone ab system_root.
teble info.apk install-check this phone info.
Orange state disabler:
Flashing guide & zip file
Click Wipe βFormat Data β Yes β Press Enter.
Then Click Reboot β Recovery (Reboot to Recovery ).
After this, TWRP Recovery Mode will be installed on your phone
Link:Orange disabler.zip
gapp Gsi install: PC to command (twrp flash not work Because system size is low)
Vanlina gsi install to twrp (An 12 gsi flash twrp. but twrp not boot )
this phone dynamic arm64 ab work (normal arm64 ab not work)
any problem to fastboot full flash stock ROM
Parvej789 said:
tested post
dynamic TWRP recovery fully does not work. Because your phone is super.img partition(System Product vendor not r w). any img file flash and buckup working. This phone ab system_root.
teble info.apk install-check this phone info.
Orange state disabler:
Flashing guide & zip file
Click Wipe βFormat Data β Yes β Press Enter.
Then Click Reboot β Recovery (Reboot to Recovery ).
After this, TWRP Recovery Mode will be installed on your phone
Link:Orange disabler.zip
gapp Gsi install: PC to command (twrp flash not work Because system size is low)
Vanlina gsi install to twrp (An 12 gsi flash twrp. but twrp not boot )
this phone dynamic arm64 ab work (normal arm64 ab not work)
any problem to fastboot full flash stock ROM
flash but phone not on: When you turn on the phone, the phone shuts off in 2 to 5 seconds. Hold down the volume button on the bottom of the phone and press the power button, release the pressed button as soon as it is turned on. Witt phone on.
problem fixed: vendor img flash problem fixed
Click to expand...
Click to collapse
treble gsi comes in .img.xz extension, I don't know how to flash this on dynemic partition. if you can show me the way, please do it.
cmcd comannd installed succesfully...
when i use comand fastboot reboot recovery ,
error with unkonw reboot recovery...do have solution ..with other comand
charlis88 said:
cmcd comannd installed succesfully...
when i use comand fastboot reboot recovery ,
error with unkonw reboot recovery...do have solution ..with other comand
Click to expand...
Click to collapse
fastboot reboot & quickly Hold up volume button click phone .
boot to recovery
immi said:
treble gsi comes in .img.xz extension, I don't know how to flash this on dynemic partition. if you can show me the way, please do it.
Click to expand...
Click to collapse
img.xz uncompresing and gsi img rename to system.img.
vanlia gsi system.img to twrp flash
gapp gsi system img to cmd flash(https://forum.xda-developers.com/t/custom-rom-dynamic-partition-arm64-ab.4379341/ )
Parvej789 said:
fastboot reboot & quickly Hold up volume button click phone .
boot to recovery
Click to expand...
Click to collapse
I got it...thanks Mate....
Not bug work good like normaly...
thanks for you job DEV . . .
Custome recovery was ready....i hope in future will be release custome rom Base AOSP . . . .
Thanks
XDA and all Dev . . .God bless All you Job
charlis88 said:
Custome recovery was ready....i hope in future will be release custome rom Base AOSP . . . .
Thanks
XDA and all Dev . . .God bless All you Job
Click to expand...
Click to collapse
2. Gsi Rom / Custom from Install guide & link:
https://forum.xda-developers.com/t/custom-rom-dynamic-partition-arm64-ab.4379341/
my touchscreen dead in twrpmode
any solution?
thanks for your help
rihuym;ls said:
my touchscreen dead in twrpmode
any solution?
thanks for your help
Click to expand...
Click to collapse
Your phone build number
Parvej789 said:
Your phone build number
Click to expand...
Click to collapse
X680B-H6215EFIJ-Q-OP-211130V265
rihuym;ls said:
X680B-H6215EFIJ-Q-OP-211130V265
Click to expand...
Click to collapse
Otg to mouse used TWRP work
Parvej789 said:
Otg to mouse used TWRP work
Click to expand...
Click to collapse
Can you kindly explain that sir
Im beginner here
rihuym;ls said:
Can you kindly explain that sir
Im beginner here
Click to expand...
Click to collapse
I've tried that and not working,
Wait some time
rihuym;ls said:
I've tried that and not working,
Click to expand...
Click to collapse
Wait some time