??
Can anyone confirm this working before I go ruin my phone haha
Clank50AE said:
Can anyone confirm this working before I go ruin my phone haha
Click to expand...
Click to collapse
You won't. Enjoy the better software!
suzook said:
You won't. Enjoy the better software!
Click to expand...
Click to collapse
Thank you for the Swift reply! My RM3 is glitchy as albeit and I'd like more stability. I know it's just the OS but it's very annoying.
Looks great. There's a big red warning to your thread tho that don't use if you're phone is Red Magic 3 it will damage the motherboard. Hmm
Any one besides OP tried this ?
leipnacht said:
Looks great. There's a big red warning to your thread tho that don't use if you're phone is Red Magic 3 it will damage the motherboard. Hmm
Click to expand...
Click to collapse
Everything is the same, other than the CPU. Nothing will happen. If people want to stick with the buggy rm3 sw, than go ahead. Not sure why you would want to.
so if rm3s fw works with rm3, can we try to install it thro twrp???
hagouba said:
so if rm3s fw works with rm3, can we try to install it thro twrp???
Click to expand...
Click to collapse
TWRP states ERROR 7 when i tried this
LE: Avoid using this so called GUIDE, this is a bad joke... I tried using the Tool on RM3 and the cmd remains stuck with at Downloading firehouse program... then after some time "Error]: Download programer FAIL.Please check phone status and reset into edl mode and try again.
Software download FAIL.Press any key exit:
I also swapped USB's, different cable and so on... COM 5 6 and 7 were used
@JerryYin I completely understand now why you were not sharing the tool ???
hagouba said:
so if rm3s fw works with rm3, can we try to install it thro twrp???
Click to expand...
Click to collapse
Absolutely not. Different sized partitions. You need to use the tool 1st.
Alex4455 said:
TWRP states ERROR 7 when i tried this
LE: Avoid using this so called GUIDE, this is a bad joke... I tried using the Tool on RM3 and the cmd remains stuck with at Downloading firehouse program... then after some time "Error]: Download programer FAIL.Please check phone status and reset into edl mode and try again.
Software download FAIL.Press any key exit:
I also swapped USB's, different cable and so on... COM 5 6 and 7 were used
Click to expand...
Click to collapse
Bad joke? Maybe you dont know what you are doing.
I did 3 phones. No issues. Its on your end.
suzook said:
Bad joke? Maybe you dont know what you are doing.
I did 3 phones. No issues. Its on your end.
Click to expand...
Click to collapse
You don't realize this is not a GUIDE, this is a statement and you are telling us to use the tool for something.... You did not provide steps, video, guide, pre-requirements, nothing
This is not my 1st time using this tool so i know how it works, i kept crashing my CN <-> EU roms and needed to use the tool
So, why don't you provide with these 3 x RM3's a video on how did you use the tool, on what hardware did you use it (PC hardware, maybe Ryzen is overkill for the app and does not know how to use the scripts), what drivers you have installed (because this tool does not provide drivers vs the RM3 tool that provides) and all that kind of stuff ?
Alex4455 said:
You don't realize this is not a GUIDE, this is a statement and you are telling us to use the tool for something.... You did not provide steps, video, guide, pre-requirements, nothing
This is not my 1st time using this tool so i know how it works, i kept crashing my CN <-> EU roms and needed to use the tool
So, why don't you provide with these 3 x RM3's a video on how did you use the tool, on what hardware did you use it (PC hardware, maybe Ryzen is overkill for the app and does not know how to use the scripts), what drivers you have installed (because this tool does not provide drivers vs the RM3 tool that provides) and all that kind of stuff ?
Click to expand...
Click to collapse
I'll delete the thread. I was trying to do people a favor. Didn't realize I needed to hold people's hands.
suzook said:
I'll delete the thread. I was trying to do people a favor. Didn't realize I needed to hold people's hands.
Click to expand...
Click to collapse
You shouldn't listen to aggressive people, they're the minority, thanks for whatever you were trying to do. I would like to give it a read if you still have the guide saved
If you speak the truth then please provide us with a picture or anything. First I don't know if rm3s fw is more stable than rm3 but if it is, I would definitely come back to stock rom as I missed the fan and triggers very much.
Sangyedorje said:
You shouldn't listen to aggressive people, they're the minority, thanks for whatever you were trying to do. I would like to give it a read if you still have the guide saved
Click to expand...
Click to collapse
Aggressive people ? Guide ?
The Guide was like this:
Use this tool from this thread (https://forum.xda-developers.com/red-magic-3/how-to/tool-nubia-red-magic-3s-unbirck-tool-t4025207) and enjoy the much more stable firmware of the RM3S "END"
And like i said in my previous posts, i asked him for a detailed explanation because what he said does not work, it always ends up with sahara_rx_data:237, i even tried on my laptop with with windows 7 fresh install
Then he suddenly reacts like a 12 years old and deletes everything
Alex4455 said:
Aggressive people ? Guide ?
The Guide was like this:
Use this tool from this thread (https://forum.xda-developers.com/red-magic-3/how-to/tool-nubia-red-magic-3s-unbirck-tool-t4025207) and enjoy the much more stable firmware of the RM3S "END"
And like i said in my previous posts, i asked him for a detailed explanation because what he said does not work, it always ends up with sahara_rx_data:237, i even tried on my laptop with with windows 7 fresh install
Then he suddenly reacts like a 12 years old and deletes everything
Click to expand...
Click to collapse
Well, you said his post was a bad joke that comes off as aggressive, even if the guide is dangerously unexplained he didn't wrote it with malicious intent so you shouldn't talk to a fellow forum member that way.
I think he is onto something, it seems reasonable that if RM3 and RM3S share so much hardware in common their firmwares won't differ that much either.
Sangyedorje said:
Well, you said his post was a bad joke that comes off as aggressive, even if the guide is dangerously unexplained he didn't wrote it with malicious intent so you shouldn't talk to a fellow forum member that way.
I think he is onto something, it seems reasonable that if RM3 and RM3S share so much hardware in common their firmwares won't differ that much either.
Click to expand...
Click to collapse
Bad Joke of a guide is considered aggressive these days ? Whoaw, the newer generation is way over sensitive
Besides the so called guide, i lost almost 4-5 hours investigating this so called guide with error fixing and so on, here is what worked for me
The below "what worked for me steps" resulted and complete WIPE of the device !
I have no responsibility over bricked devices, i simply shared what some one did not bother to "info"
Do this on your own RISK !
What worked for me as on flashing the RM3s firmware on my RM3 is that 1st of all you need Windows 8.1, i tried on different hardware AMD and Intel with the Unbrick Tool RM3S and does not work on Windows 10 no matter what (windows 7 did not worked on Ryzen and my Laptop)
1. Have Windows 8.1 X64 (i used my Intel Celeron Laptop)
2. Have the drivers for the QDLoader HS-USB Driver_64bit_Setup
3. Download the tool for the Unbrick RM3S
4. Install the QDLoader drivers on the newly installed windows 8.1 and choose to restart
5. Turn the phone off and leave it like that until the Unbrick tool is ready
6. Run the Tool's exe and let it extract (the RM3S Unbrick Tool)
7. Power on the Phone holding PWR and Vol Down
8. Connect to a USB 2.0 port directly in to the motherboard with a quality cable
9. Select EDL mode from the Bootloader menu of the phone
10. Search within Device manager the phone's COM port
11. When the tool is ready, input the COM Number and select continue and install
These steps worked for me and phone booted fine... Conclusion is: I went Back to CN V2.38 and restored backup via TWRP, no performance gain, the device is still seen as RM3 but running with RM3S firmware
GPU and CPU frequency is of a normal SD855
My personal opinion is: This is a waste of time after all the hype I've gotten in to believing it would run like a SD855+
Alex4455 said:
Bad Joke of a guide is considered aggressive these days ? Whoaw, the newer generation is way over sensitive
Besides the so called guide, i lost almost 4-5 hours investigating this so called guide with error fixing and so on, here is what worked for me
The below "what worked for me steps" resulted and complete WIPE of the device !
I have no responsibility over bricked devices, i simply shared what some one did not bother to "info"
Do this on your own RISK !
What worked for me as on flashing the RM3s firmware on my RM3 is that 1st of all you need Windows 8.1, i tried on different hardware AMD and Intel with the Unbrick Tool RM3S and does not work on Windows 10 no matter what (windows 7 did not worked on Ryzen and my Laptop)
1. Have Windows 8.1 X64 (i used my Intel Celeron Laptop)
2. Have the drivers for the QDLoader HS-USB Driver_64bit_Setup
3. Download the tool for the Unbrick RM3S
4. Install the QDLoader drivers on the newly installed windows 8.1 and choose to restart
5. Turn the phone off and leave it like that until the Unbrick tool is ready
6. Run the Tool's exe and let it extract (the RM3S Unbrick Tool)
7. Power on the Phone holding PWR and Vol Down
8. Connect to a USB 2.0 port directly in to the motherboard with a quality cable
9. Select EDL mode from the Bootloader menu of the phone
10. Search within Device manager the phone's COM port
11. When the tool is ready, input the COM Number and select continue and install
These steps worked for me and phone booted fine... Conclusion is: I went Back to CN V2.38 and restored backup via TWRP, no performance gain, the device is still seen as RM3 but running with RM3S firmware
GPU and CPU frequency is of a normal SD855
My personal opinion is: This is a waste of time after all the hype I've gotten in to believing it would run like a SD855+
Click to expand...
Click to collapse
Can you tell if it far more stable and less bug than our rm3 fw? As for the performance it depend on device prosessor.
Related
This has been a fiasco... Ive been attempting to Root, Unlock Bootloader, Install CWM, and Flash to HD Custom rom that is now out for this device. Ive found two tutorials on how exactly to do this and one video. The one originally posted on this forum by Superdragonpt has been modified by this forum and there no longer is any useful information or files available (after sifting over 120 pages in that thread) then there is another one posted on Android Forums here (http://androidforums.com/memo-pad-h...ad-hd7-us-backup-restore-unlock-recovery.html) using SP Flash Tool. However he clearly states that he was only capable of doing this walk-through on Windows XP and had limited success on Windows 7. As I am running windows 7 this creates an issue... There is also attempted to follow the YouTube instructions posted here (https://www.youtube.com/watch?v=yuNFx10cS2U) however the OP of that doesnt respond to his numerous requests stating that "App Not Installed" error upon attempting to install.
I delved even deeper to find the root of my Windows 7 errors. When using the SP Flash Tool Ive read that the battery needs to be fully charged and vcom drivers need to be installed. Well ok, I've installed over 20 different drivers from aproximatly 7-8 different threads on the SP Flash Tool, the battery is fully charged and there doesnt seem to be any conclusive resolution to any of this. The device seems to cycle between modes when you plug it into the PC full battery or not and the SPFT begins the process and stops the second the device cycles modes...
After all this research and work itd be great if someone could jump in here...
Berrabus said:
This has been a fiasco... Ive been attempting to Root, Unlock Bootloader, Install CWM, and Flash to HD Custom rom that is now out for this device. Ive found two tutorials on how exactly to do this and one video. The one originally posted on this forum by Superdragonpt has been modified by this forum and there no longer is any useful information or files available (after sifting over 120 pages in that thread) then there is another one posted on Android Forums here (http://androidforums.com/memo-pad-h...ad-hd7-us-backup-restore-unlock-recovery.html) using SP Flash Tool. However he clearly states that he was only capable of doing this walk-through on Windows XP and had limited success on Windows 7. As I am running windows 7 this creates an issue... There is also attempted to follow the YouTube instructions posted here (https://www.youtube.com/watch?v=yuNFx10cS2U) however the OP of that doesnt respond to his numerous requests stating that "App Not Installed" error upon attempting to install.
I delved even deeper to find the root of my Windows 7 errors. When using the SP Flash Tool Ive read that the battery needs to be fully charged and vcom drivers need to be installed. Well ok, I've installed over 20 different drivers from aproximatly 7-8 different threads on the SP Flash Tool, the battery is fully charged and there doesnt seem to be any conclusive resolution to any of this. The device seems to cycle between modes when you plug it into the PC full battery or not and the SPFT begins the process and stops the second the device cycles modes...
After all this research and work itd be great if someone could jump in here...
Click to expand...
Click to collapse
The forum your link leads to is down atm so I couldn't check it out. However, in the meantime, why don't you try booting Windows XP in a virtual machine, and give it a go there?
pokrajac said:
The forum your link leads to is down atm so I couldn't check it out. However, in the meantime, why don't you try booting Windows XP in a virtual machine, and give it a go there?
Click to expand...
Click to collapse
And virtually load drivers? Because thats where the issue is that Windows 7 only recognizes the driver for a brief 3-5 second window...
Berrabus said:
And virtually load drivers? Because thats where the issue is that Windows 7 only recognizes the driver for a brief 3-5 second window...
Click to expand...
Click to collapse
Yeah, you install drivers on the virtual OS and it should get detected.
pokrajac said:
Yeah, you install drivers on the virtual OS and it should get detected.
Click to expand...
Click to collapse
Ill give that a **** once I get my me173x out of its eternal boot loop. Im under the impression I need to download the stock ROM image and throw that on a SD card and attempt to do a restore... Hope it works
Berrabus said:
Ill give that a **** once I get my me173x out of its eternal boot loop. Im under the impression I need to download the stock ROM image and throw that on a SD card and attempt to do a restore... Hope it works
Click to expand...
Click to collapse
Well that would be the proper course of action if you can get to CWM yes. Just don't forget to do a clean install, wipe data and cache.
pokrajac said:
Well that would be the proper course of action if you can get to CWM yes. Just don't forget to do a clean install, wipe data and cache.
Click to expand...
Click to collapse
Unfortunately CWM is not even installed at this point... I didnt get that far as I was attempting to unlock the bootloader when this happened
Berrabus said:
Unfortunately CWM is not even installed at this point... I didnt get that far as I was attempting to unlock the bootloader when this happened
Click to expand...
Click to collapse
Well, if the drivers on a virtual xp aren't working and you don't want to set up a dual boot with xp, then your only option is to send it to a service center.
pokrajac said:
Well, if the drivers on a virtual xp aren't working and you don't want to set up a dual boot with xp, then your only option is to send it to a service center.
Click to expand...
Click to collapse
Nabbed the tablet for 15 dollars with cracked digitizer at that point if I cant repair it myself then Id say cut my losses and have a pretty paperweight lol... I actually located a Windows XP machine and will be heading to get it seems that their a bit of a rarity these days
This tool can help you to unbrick the Red Magic 3S. It will restore the phone to the oldest version, you need to update the system software by yourself. This tool is based on Qualcomm firehose protocol, so it should fix all kinds of software issue.
ALL DATA ON YOUR PHONE WILL BE LOST
DO NOT USE THIS TOOL IF YOU ARE RED MAGIC 3!!!!!!!! IT MAY DAMAGE YOUR MOTHER BOARD!!!!!!!YOU MAY VOID THE WARRENTY WITH THIS TOOL
If the tool have any problem, please send me a pm or reply down below.
Download Here:
EU ONLY
NON-EU
Everyone with a rm3 should use this. The SW on rm3s is much more stable. There will be no issues with your phone. I have done 3 already. Everything works fine.
@JerryYin and other members
you might think that sharing middle fingers on our forums looks funny but actually is not at all...
Forum Rules
2. Member conduct.
2.1 Language: XDA is a worldwide community. As a result, what may be OK to say in your part of the world, may not be OK elsewhere. Please don't direct profanity, sexually explicit language or other offensive content toward Members or their work. Conversely, while reading posts from other members, remember that the word you find offensive may not be offensive to the writer. Tolerance is a two-way street
Click to expand...
Click to collapse
a small cleaning has been performed, please keep it civil and report anything that may concern instead of engaging, we are here to deal with whatever you think is not OK.
have fun and enjoy the forums!
suzook said:
Everyone with a rm3 should use this. The SW on rm3s is much more stable. There will be no issues with your phone. I have done 3 already. Everything works fine.
Click to expand...
Click to collapse
Hi Suzook i also confirm that Rm3s brick tool works on RM3 perfectly. I also changed my RM3 rom to Rm3s, thanks for your help..
@ jerry thanks to create a very useful utility..
vijaytechno21 said:
Hi Suzook i also confirm that Rm3s brick tool works on RM3 perfectly. I also changed my RM3 rom to Rm3s, thanks for your help..
@ jerry thanks to create a very useful utility..
Click to expand...
Click to collapse
Yup I already seen a Red Magic 3s with that rare RM3 grill for sale online. Just glad to see people can get a bit more resale value on there RM3 now. Just gotta figure out who is is. I might buy it just to find out.
Jerry said this would happen lol
vijaytechno21 said:
Hi Suzook i also confirm that Rm3s brick tool works on RM3 perfectly. I also changed my RM3 rom to Rm3s, thanks for your help..
@ jerry thanks to create a very useful utility..
Click to expand...
Click to collapse
what u got with rm3s rom? .. whats the new change!! .. and why should i do it?
Found little more optimized rest all is same, transition also find smooth. Rest need to check.
This is not changing a rm3 to a rm3s. Anyone who thinks this, is an IDIOT. What it is doing is giving you a better, more stable FW. Another bonus is TWRP on the NA FW works. No need for the CN FW. Any idiot buying a rm3 with rm3s fw is, well, an idiot.
Well since people are flashing the 3s ROM to the 3 I'll just post this.
While ago I tested this. Found a few issues. Never tested the latest 3s ROM on the 3 but I'll just leave you with these test.
I advise people only use the 3S ROM on the 3S.
install package failure 25% help me !
JerryYin said:
This tool can help you to unbrick the Red Magic 3S. It will restore the phone to the oldest version, you need to update the system software by yourself. This tool is based on Qualcomm firehose protocol, so it
Click to expand...
Click to collapse
phivietnam said:
JerryYin said:
This tool can help you to unbrick the Red Magic 3S. It will restore the phone to the oldest version, you need to update the system software by yourself. This tool is based on Qualcomm firehose protocol, so it
Click to expand...
Click to collapse
Which package are you using?
Click to expand...
Click to collapse
PLease help, I am getting this error message:
"Download port number=8
Downloading firehose programmer...
[Error]: Download programer FAIL.Please check phone status and reset into edl mode and try again.
Software download FAIL.Press any key exit"
I checked Device manager and "Qualcomm HS-USB QDLoader 9008 (COM8)
I also tried to use QFIL but I don't know where to find the .mbn file to use. Please help, thanks in advance
Update: The non eu version worked for me!!! Thank you a ton!
I can also confirm this works on the Red Magic 3 without issue. I have the US version so I used the Non-EU tool. It was straight forward without any issue. This ROM finally has an app drawer!!
My phone seems very stable and runs very quick. It is also able to do OTA updates without issues. I'll comment back if I find any issues.
Oh it has issues lol. You just don't know what your looking for.
He put the disclaimer in for a reason.
Now after a few months I'll post an article about degradation lol
I'm having an issue - the program never asks to install qualcomm drivers like in the guide .docx. Just goes straight to extraction. Am I missing something?
Edit: Nevermind, it seems to be working. Must've had the drivers already installed and for some reason the phone didnt show up properly the first time.
Help me
How to use the tool bro?when I open the downloaded zip,it's always show the file is damaged.Please help.
Do I need the bootloader unlocked? Because I get Download software image fail.
wildchild048 said:
Do I need the bootloader unlocked? Because I get Download software image fail.
Click to expand...
Click to collapse
Nope, no need for unlocked bootloader. Use the Non-EU version.
Having some issues. Super bricked phone. I can get into fastboot and edl.
Tool is not working. I get an error. Download programmer fail. Using another programmer im getting firehose communication handshake failed. I know these works i used it a few times but i did switch over to a new install of windows 10 but im using pro now. 9008 driver is installed showing up in device manager.
Any ideas?
Ive uploaded signed Qualcomm driver's I found that install on windows and don't turn on test mode. These work. Then afterwards toggle USB options with device plugged in PC ,change from charging to PTP and let it automatically install drivers. Rebooted and opened msm tool and Is connecting and now showing 2 ports. Hope this works for anyone having trouble ; as earlier I had no Qualcomm driver's installed and no ports showing on msm tool after many attempts to install drivers. I'm now ready when something comes along to flash. After rebooting PC use cmd window adb reboot edl. Will then show up on msm tool as connected. When installing Qualcomm driver's choose first option Wwan is not used to get Ip address. If this works for you hit the like button "it's free". I've seen many people complaining they can't connect to msm tool. This fixed my issues. Tested on windows 10 pro
Driver's. https://drive.google.com/file/d/1AOeuMj6D5f6H4yhAC1QKGN437qV9YmJs/view?usp=drivesdk
Mattie69 can you explain how to work the MSMTool to me? It wants a login and i dont understand exactly what to do.
Do these overwrite existing drivers (used for rooting), or just add additional drivers to Windows?
XNine said:
Do these overwrite existing drivers (used for rooting), or just add additional drivers to Windows?
Click to expand...
Click to collapse
No additional driver's need to make Qualcomm devices/one plus phones to connect to msm tool.
illusiveairforce said:
Mattie69 can you explain how to work the MSMTool to me? It wants a login and i dont understand exactly what to do.
Click to expand...
Click to collapse
You don't use the factory one use the one above or below. It's a tool that relocks bootloader and flashes device to original firmware that it was shipped with. It's an anti-brick tool so to speak.
I still cant get it to work. the driver looks to be working and MSM identifying it
but no matter what i do it wont progress. i cant adb reboot because adnb nor fastboot are responsive. the phone just disconnectes and reconnects USB over and over and thats it. no button combo of volume keys and power being held for along time seems to work either.
I finally got it functional and now at "Image does not match" tried on 3 other machines with 3 seperate MSm installs.
9 5G LE2115 is my phone I bought directly form OnePlus. Idk what to do from here.
Usually kicks up that warning if your trying to use the wrong msm tool.?
i tried this one, the one from reddits backup area and the offical one linked to me by the angriest technician alive. it just boots and reboots and reboots. no matter the cable, version, cord. port, usb standard, serial setting or any combination of drivers form signed, unsigned and official, everything always leads to that same error.
its insane. the tech said "i didnt say run that (MSM he linked me) , were not liable to what it did"
I replied with " it didnt flash anything, thats why im contacting you and its qualcomms software, youre the company official making customers download altered /unofficial builds of another companies intellectual property. Im sure theyll be so happy to find out what you are doing"
he just logged after that. The balls on that guy. They Qualcomm didnt incorporate region based logins and VM Protect into MSM because its fun.
So yeah, hopefully i fix it before qualcomm returns my my emails.
applyscience said:
i tried this one, the one from reddits backup area and the offical one linked to me by the angriest technician alive. it just boots and reboots and reboots. no matter the cable, version, cord. port, usb standard, serial setting or any combination of drivers form signed, unsigned and official, everything always leads to that same error.
its insane. the tech said "i didnt say run that (MSM he linked me) , were not liable to what it did"
I replied with " it didnt flash anything, thats why im contacting you and its qualcomms software, youre the company official making customers download altered /unofficial builds of another companies intellectual property. Im sure theyll be so happy to find out what you are doing"
he just logged after that. The balls on that guy. They Qualcomm didnt incorporate region based logins and VM Protect into MSM because its fun.
So yeah, hopefully i fix it before qualcomm returns my my emails.
Click to expand...
Click to collapse
What about that global fastboot rom I linked you to?
mattie_49 said:
What about that global fastboot rom I linked you to?
Click to expand...
Click to collapse
man, sorry super tired. yeah no fastboot at all.no screen activity ever, all i get is usb plug in and out sounds every 3 seconds on my computer.
no fastboot, no adb. nothing.
applyscience said:
man, sorry super tired. yeah no fastboot at all.no screen activity ever, all i get is usb plug in and out sounds every 3 seconds on my computer.
no fastboot, no adb. nothing.
Click to expand...
Click to collapse
You were able to get back from aospa though right? Via msm
mattie_49 said:
You were able to get back from aospa though right? Via msm
Click to expand...
Click to collapse
i always had fastboot access during that, i just was too stupid to extract my own img files form the paylod dumps (theres so many guides online, i just suck with it) anyhow, after you hooked me up with download i just ran the the imgs in a flash-all bat file to clean up both slots of the phone and it was wonderful. as soon as i went to the unofficial lineage my phone just gave up. 2 reboots later.
im not sure what im going to do. its been a long day and not too pleased with myself so im trying to just procrastinate it till tmw or sunday.
[17784][07-04 07:23:08.893]<4> [3] [CSerialCommHelper] No data in buffer to be sent 0
[17784][07-04 07:23:11.061]<4> [3] [SP][195] Check cmd done status failed. 1
this is the 2 lines in the log that have ruined my weekend.
I'm investigating possible solutions to common MSM errors that prevent flashing.
See the following thread and feel free to try the steps outlined if you're brave enough.
Please report back your findings.
[ADVANCED] [UNTESTED] Possible Fix - MSM Errors (Sahara, Param info, etc)
WARNING: THE FOLLOWING IS FOR INFORMATIONAL PURPOSES ONLY AND MAY FURTHER DAMAGE YOUR DEVICE. EXERCISE EXTREME CAUTION. USE ONLY AS A LAST RESORT. This was tested with a Global OnePlus 9 LE2115 Overview So I was encountering an error with MSM...
forum.xda-developers.com
Can you re-up these? I'm getting a 404 on the google drive link.
Ethanadams642 said:
Can you re-up these? I'm getting a 404 on the google drive link.
Click to expand...
Click to collapse
Index of /list/Unbrick_Tools
Hello i've flashed a custom ROM for my Redmi 9 this morning but it failed.
Now my phone doing a big f* bootloop, the recovery (TWRP) is dead and the fastboot too.
I've found a tool named SP Tool to repair the phone but the problem is when i plug my phone to my computer the phone is charging (logic) and instead showing the animation of the battery it bootloop until it runs out of battery.
So someone can help me please
Thanks
Edit: Oh i forgot, now i've realised than when i flashed the rom i've wiped the entire phone (internal storage too)
My bad...
Is your device Merlin or Lancelot? If you're not sure, what processor do you have, Qualcomm or MTK?
If it is Qualcomm, try test-point method to access EDL mode, then use Mi Flash Tool to flash MIUI on your device. Read this FAQ to learn more.
If it is MTK, then follow this guide and download the tools used in the video from here. You can find your device ROM (Lancelot) here.
Just make sure you're flashing global version if your device is global or chinese if your device is chinese.
If you're not sure what you're doing, I highly recommend sending it to a professional.
Goodluck.
Hi, my phone has the codename Lancelot with a MTK Helio G80.
I will try, thanks
XDHx86 said:
Is your device Merlin or Lancelot? If you're not sure, what processor do you have, Qualcomm or MTK?
If it is Qualcomm, try test-point method to access EDL mode, then use Mi Flash Tool to flash MIUI on your device. Read this FAQ to learn more.
If it is MTK, then follow this guide and download the tools used in the video from here. You can find your device ROM (Lancelot) here.
Just make sure you're flashing global version if your device is global or chinese if your device is chinese.
If you're not sure what you're doing, I highly recommend sending it to a professional.
Goodluck.
Click to expand...
Click to collapse
It worked! Thanks
But now i've got a little problem..
The phone don't have a IMEI anymore
LeCaptain said:
It worked! Thanks
But now i've got a little problem..
The phone don't have a IMEI anymore
Click to expand...
Click to collapse
Both SIM slots have no IMEI? I assume you wiped all and didn't backup?
You'll need Modem Meta and ENG ROM to fix that, you can get the ROM and the specific way to fix it from here.
If you're lost you'll find all the answers in the thread, but don't be afraid to ask there just don't ask an already asked question.
Here is a brief guide made by the same person to provide the ROM.
Goodluck.
LeCaptain said:
It worked! Thanks
But now i've got a little problem..
The phone don't have a IMEI anymore
Click to expand...
Click to collapse
hey can i contract to you? i have a same problem too need some help
thank.
LeCaptain said:
It worked! Thanks
But now i've got a little problem..
The phone don't have a IMEI anymore
Click to expand...
Click to collapse
can i contract to you? i have a same problem too need help
XDHx86 said:
Is your device Merlin or Lancelot? If you're not sure, what processor do you have, Qualcomm or MTK?
If it is Qualcomm, try test-point method to access EDL mode, then use Mi Flash Tool to flash MIUI on your device. Read this FAQ to learn more.
If it is MTK, then follow this guide and download the tools used in the video from here. You can find your device ROM (Lancelot) here.
Just make sure you're flashing global version if your device is global or chinese if your device is chinese.
If you're not sure what you're doing, I highly recommend sending it to a professional.
Goodluck.
Click to expand...
Click to collapse
I followed the guide in the video. But failing in the LibUSB Step. Mediathek device is not showing up. My Redmi 9 is hard bricked, just seeing a "redmi logo" bootloop. No matter if I try to boot normally, recovery or fastboot. Any Idea?
Kisle said:
I followed the guide in the video. But failing in the LibUSB Step. Mediathek device is not showing up. My Redmi 9 is hard bricked, just seeing a "redmi logo" bootloop. No matter if I try to boot normally, recovery or fastboot. Any Idea?
Click to expand...
Click to collapse
This tool installs the driver required to unbrick your device, if you can find your device specific driver to install on your PC then you can skip using this tool and install the driver manually.
If you can't find the driver, then try using a different cable when connecting the phone to the PC. Or a different port in the PC (Like the legacy 2.0 USB port in the motherboard).
The tool should first detect any device connected to install the driver it doesn't work the other way. If it still doesn't work then your only option is to find the driver manually. Or maybe you can find an updated version of the same tool or a similar tool.
XDHx86 said:
This tool installs the driver required to unbrick your device, if you can find your device specific driver to install on your PC then you can skip using this tool and install the driver manually.
If you can't find the driver, then try using a different cable when connecting the phone to the PC. Or a different port in the PC (Like the legacy 2.0 USB port in the motherboard).
The tool should first detect any device connected to install the driver it doesn't work the other way. If it still doesn't work then your only option is to find the driver manually. Or maybe you can find an updated version of the same tool or a similar tool.
Click to expand...
Click to collapse
Thanks for your help. Actually I got it working with a lot of try and error... not even sure which drivers worked at the end. Also I had to switch to a win 7 computer. On win 11 drivers just didnt work. But with MTK Bypass tool + SP flash Tool, I was able to flash the stock image and recover my briked phone!
Kisle said:
Thanks for your help. Actually I got it working with a lot of try and error... not even sure which drivers worked at the end. Also I had to switch to a win 7 computer. On win 11 drivers just didnt work. But with MTK Bypass tool + SP flash Tool, I was able to flash the stock image and recover my briked phone!
Click to expand...
Click to collapse
Glad it worked out in the end mate.
Might be a random guess but it could be because signature protection was enabled on the win 11 PC.
Don't brick your phone again!
LeCaptain said:
It worked! Thanks
But now i've got a little problem..
The phone don't have a IMEI anymore
Click to expand...
Click to collapse
Hi can I contact you I also have the same problem and it's my only mobile thank you
DISC0DEVIL said:
Hi can I contact you I also have the same problem and it's my only mobile thank you
Click to expand...
Click to collapse
Hey, i can help you by sending videos that helped me to fix my problem but i've lost them.
Do you have a bootloader locked or unlocked? (here to know how)
If it's the 1st option, relax, you can modify easily
If it's the 2nd a little bit less
NB: i don't use really use this phone, just for developpment and some things than it can break the OS because it had some problems with apps and updates.
Have a great day and i hope than you have found a solution before my answer.
XDHx86 said:
Is your device Merlin or Lancelot? If you're not sure, what processor do you have, Qualcomm or MTK?
If it is Qualcomm, try test-point method to access EDL mode, then use Mi Flash Tool to flash MIUI on your device. Read this FAQ to learn more.
If it is MTK, then follow this guide and download the tools used in the video from here. You can find your device ROM (Lancelot) here.
Just make sure you're flashing global version if your device is global or chinese if your device is chinese.
If you're not sure what you're doing, I highly recommend sending it to a professional.
Goodluck.
Click to expand...
Click to collapse
I just made an account to tell all of you amazing people in this forum how much i truly appreciate your support:
YOU ALL ARE AWESOME!!!! I was legit going to loose my job if i didn't unbrick this darn Redmi 9 coz it's my boss's daughter's device
e putting the blame on me being the spoiled lil brat she is :/ so it was either this phone gets working or i get thrown onto the streets.
I soared through so many websites and articles that i had almost given up XD... until i landed here.
I love ya'll! keep up the good work!
LeCaptain said:
Hello i've flashed a custom ROM for my Redmi 9 this morning but it failed.
Now my phone doing a big f* bootloop, the recovery (TWRP) is dead and the fastboot too.
I've found a tool named SP Tool to repair the phone but the problem is when i plug my phone to my computer the phone is charging (logic) and instead showing the animation of the battery it bootloop until it runs out of battery.
So someone can help me please
Thanks
Edit: Oh i forgot, now i've realised than when i flashed the rom i've wiped the entire phone (internal storage too)
My bad...
Click to expand...
Click to collapse
please tell me you didnt reflash preloader
XDHx86 said:
Is your device Merlin or Lancelot? If you're not sure, what processor do you have, Qualcomm or MTK?
If it is Qualcomm, try test-point method to access EDL mode, then use Mi Flash Tool to flash MIUI on your device. Read this FAQ to learn more.
If it is MTK, then follow this guide and download the tools used in the video from here. You can find your device ROM (Lancelot) here.
Just make sure you're flashing global version if your device is global or chinese if your device is chinese.
If you're not sure what you're doing, I highly recommend sending it to a professional.
Goodluck.
Click to expand...
Click to collapse
Bro in my device when i Connect my mobile.. libusb not recognized my phone.. What should i do
optsiam said:
Bro in my device when i Connect my mobile.. libusb not recognized my phone.. What should i do
Click to expand...
Click to collapse
Is it in EDL mode?
No but I am gonna try it Tomorrow
Someone help me please? Two days ago i bricked my redmi 9 eea after update via ota. He just died, no infinite loop or charge. After a tutorial from here was able to revive him with sp flash, phyton and other stuffs. Everyting went OK and my phone is alive again. Whatever now I've getting issues that weren't there before hard brick. My redmi doesnt recognize my Sim card. I enter my pin security and then don't get any sim card signal. Also can't log on play store with my Google account, i get this message "there was a problem communicating with Google servers, try again later." Tried to wipe Google play services data, also from play store, formated redmi from recovery but the problems remains. Maybe i need to reinstall rom again, im pretty sure it was the right rom i flashed because i download it from miui official website. Unfortunately after reviving my redmi with sp flash, my bootloader got locked again. Sense i cant log with Google account because phone doesn't recognize my chip to activate data sim card, i cant either unlock with mi unlock. Is there any solution for this? Thanks.
Perhaps flashing phone with another rom the problem gets fixed. I can still flash my phone with sp flash even with bootloader blocked right? My redmi comes with a European rom. To revive him i used rom last update, maybe should try a previous version?
LeCaptain said:
It worked! Thanks
Click to expand...
Click to collapse
Are all the steps performed with the phone turned off and connected to the computer?
I tried putting the beta of OOS13 on my Oneplus and now i get that error message and ive been trying for so long.
the serial number is fb7b98a9
Flash by edl if you can't do it then pm I'll fix it by tv
Could you elaborate a little further? Are you just not able to flash OO13 beta or has the attempt of doing so corrupted your device completely?
If the latter, You will most likely need to flash an emergency MSMToolkit. It is an Indian OP9Pro variant but will bring your device back from the dead. Once that is done, you will just run a proper MSMToolkit and be right as rain.
EtherealRemnant wrote up an amazing guide on how to carry this out. SO amazing that its the only guide stickied on the 9 forums, currently.
- Here is a mega hosted copy of the Indian OP9Pro MSMToolkit,
I can personally vouch for the guide, as my 9 went into a bricked state with vague errors about corrupted system. I tried every toolkit, recovery and ROM and nothing worked. Thats when EthRem came to my rescue. Hopefully his work can come to yours as well.
and if that isn't what you meant and are just dying to get into OOS13, id just stick with one of the many A13 ROMs currently available. OOS13 is beautiful but, i just cant honestly suggest using Oneplus software anymore.
Good luck
applyscience said:
Could you elaborate a little further? Are you just not able to flash OO13 beta or has the attempt of doing so corrupted your device completely?
If the latter, You will most likely need to flash an emergency MSMToolkit. It is an Indian OP9Pro variant but will bring your device back from the dead. Once that is done, you will just run a proper MSMToolkit and be right as rain.
EtherealRemnant wrote up an amazing guide on how to carry this out. SO amazing that its the only guide stickied on the 9 forums, currently.
- Here is a mega hosted copy of the Indian OP9Pro MSMToolkit,
I can personally vouch for the guide, as my 9 went into a bricked state with vague errors about corrupted system. I tried every toolkit, recovery and ROM and nothing worked. Thats when EthRem came to my rescue. Hopefully his work can come to yours as well.
and if that isn't what you meant and are just dying to get into OOS13, id just stick with one of the many A13 ROMs currently available. OOS13 is beautiful but, i just cant honestly suggest using Oneplus software anymore.
Click to expand...
Click to collapse
applyscience said:
Could you elaborate a little further? Are you just not able to flash OO13 beta or has the attempt of doing so corrupted your device completely?
If the latter, You will most likely need to flash an emergency MSMToolkit. It is an Indian OP9Pro variant but will bring your device back from the dead. Once that is done, you will just run a proper MSMToolkit and be right as rain.
EtherealRemnant wrote up an amazing guide on how to carry this out. SO amazing that its the only guide stickied on the 9 forums, currently.
- Here is a mega hosted copy of the Indian OP9Pro MSMToolkit,
I can personally vouch for the guide, as my 9 went into a bricked state with vague errors about corrupted system. I tried every toolkit, recovery and ROM and nothing worked. Thats when EthRem came to my rescue. Hopefully his work can come to yours as well.
and if that isn't what you meant and are just dying to get into OOS13, id just stick with one of the many A13 ROMs currently available. OOS13 is beautiful but, i just cant honestly suggest using Oneplus software anymore.
Good luck
Click to expand...
Click to collapse
The tool that you linked doesnt have o2 as he is saying in the guide.
Also yes, i tried flashing OOS13 and it just corrupted my device i've been endlessly working to fix it all day
SubColdSnow said:
The tool that you linked doesnt have o2 as he is saying in the guide.
Also yes, i tried flashing OOS13 and it just corrupted my device i've been endlessly working to fix it all day
Click to expand...
Click to collapse
1st of all flash with op9pro india msm with uncheck sah and check lite firehorse if u have hard bricked ur device then the next steps as mention above
rizzmughal said:
1st of all flash with op9pro india msm with uncheck sah and check lite firehorse if u have hard bricked ur device then the next steps as mention above
Click to expand...
Click to collapse
i tried and just get device does not match image
SubColdSnow said:
i tried and just get device does not match image
Click to expand...
Click to collapse
try it again. if anything, you will be attempting on the other slot. Many haves had issues and it just started working.
it could have been slot related, or possibly some minor detail that is finicky. (ex. you usually want to start the msmtoolkit and let it stay in the "waiting for device" phase and plug in your phone (which should be in EDL mode . youll know by the peeps of it habitually connecting/disconnecting on your PC)
assure you have india selected, assure you have the proper conditionals on/off per the guide's explication.
Assure you have the qualcom drivers installed, and they reflect the naming convention.
follow along the guide again and Just keep attempting it and don't get discouraged. Part of the reason people offer guides here is that they themselves failed many times until they got they figured it out and are trying to save people from it.
youll get it, dont worry.
I had this problem because I flashed a custom kernel on a custom rom today
SubColdSnow said:
i tried and just get device does not match image
Click to expand...
Click to collapse
try the modded msm tool. it worked for me.