So apparently on Samsungs official news site , the AOD display has a sensor that will disable the AOD when it's placed inside a pocket or a bag (Why would your watch be in your pocket or bag instead of your wrist?). You would think this would also work if say you're wearing a long sleeve shirt. I have been unable to trigger this via long sleeve shirts and I don't have thin enough clothing to test the pocket, nor do I own a bag to test.
"The device’s 3-inch circular Super AMOLED display has a resolution of 360 x 360. Its 16 million colors, full color Always On Watch continuously shows the time rather than fading to black. The ambient light sensor helps to adjust the brightness of displayed information and works to automatically disable the Always On Watch when users can’t see the screen, such as when the watch is in a pocket or a bag. Users can opt to personalize their Always On Watch with customizable, interactive watch faces."
Who's willing to help me test this feature?
Naturesretard said:
So apparently on Samsungs official news site , the AOD display has a sensor that will disable the AOD when it's placed inside a pocket or a bag (Why would your watch be in your pocket or bag instead of your wrist?). You would think this would also work if say you're wearing a long sleeve shirt. I have been unable to trigger this via long sleeve shirts and I don't have thin enough clothing to test the pocket, nor do I own a bag to test.
"The device’s 3-inch circular Super AMOLED display has a resolution of 360 x 360. Its 16 million colors, full color Always On Watch continuously shows the time rather than fading to black. The ambient light sensor helps to adjust the brightness of displayed information and works to automatically disable the Always On Watch when users can’t see the screen, such as when the watch is in a pocket or a bag. Users can opt to personalize their Always On Watch with customizable, interactive watch faces."
Who's willing to help me test this feature?
Click to expand...
Click to collapse
Someone already posted on the forums about how their AOD wasn't working, and they found out it was because their strap was blocking their wrist from making contact with the sensor. I'm guessing that the heart rate sensor didn't sense a pulse and turned off the screen completely, or some other sensor all together.
Here's the link:
http://forum.xda-developers.com/gear-s3/help/problems-feature-t3507324/page2
My AOD also turns off when the watch determines that I'm sleeping and then requires a security pin.
Sent from my SM-G935P using Tapatalk
optimummind said:
My AOD also turns off when the watch determines that I'm sleeping and then requires a security pin.
Click to expand...
Click to collapse
My AOD works just fine. But it will not turn off when sleeping or covered. It senses my heartbeat just fine. Perhaps my unit is defective? How did you get it to turn it when sleeping, anything special?
Naturesretard said:
My AOD works just fine. But it will not turn off when sleeping or covered. It senses my heartbeat just fine. Perhaps my unit is defective? How did you get it to turn it when sleeping, anything special?
Click to expand...
Click to collapse
Nothing special. My Classic began to track my sleep automatically out of the box. After I wake up, I press a button or rotate the bezel then put in my pin. Shortly afterwards, I get an alert on the watch and it shows in numbers & a graph how long I slept and also shows me how long I was motionless, how long I had a little bit of movement, and how long I was restless.
When the watch is simply covered up by my longsleeve shirt or a jacket, my AOD doesn't turn off.
Sent from my SM-G935P using Tapatalk
It won't turn off AOD with long sleeves, because it knows you're wearing it. It only turns off if it's NOT on your wrist. Or when you're sleeping.
Did anyone install the new PK7 watch update on their Gear S3? Any issues with AOD? Like AOD not working or turning off despite the AOD setting being on?
Sent from my SM-G935P using Tapatalk
I just got my Frontier today, and I came here now looking for answers on the AOD feature i have been hearing about but have not witnessed as of yet... My watch goes completely black every time after about 4 to 5 second of inactivity. Like i said i was coming here now to XDA to find out if this was a config problem or what?? Two things I have seen here that may be an issue for me, 1 - i always wear long sleeve shirts, and 2 - i have always had trouble with the smart watch heart rate monitors getting a good pulse on my wrist. (This is my 5th smartwatch, 4th samsung) I did do all of the updates today when initially using watch. I have been wearing it about 8 hours. Hope this helps.
S1CAR1US said:
I just got my Frontier today, and I came here now looking for answers on the AOD feature i have been hearing about but have not witnessed as of yet... My watch goes completely black every time after about 4 to 5 second of inactivity. Like i said i was coming here now to XDA to find out if this was a config problem or what?? Two things I have seen here that may be an issue for me, 1 - i always wear long sleeve shirts, and 2 - i have always had trouble with the smart watch heart rate monitors getting a good pulse on my wrist. (This is my 5th smartwatch, 4th samsung) I did do all of the updates today when initially using watch. I have been wearing it about 8 hours. Hope this helps.
Click to expand...
Click to collapse
Settings > Style > Always on. Have you turned that on?
Also, it won't work if the watch isn't on your wrist.
Is there a way to increase the brightness of the AOD? Mine is hard to see unless I'm in a fairly dark room.
lyall29 said:
Is there a way to increase the brightness of the AOD? Mine is hard to see unless I'm in a fairly dark room.
Click to expand...
Click to collapse
No, I just kept gesture motion on.
kronium said:
No, I just kept gesture motion on.
Click to expand...
Click to collapse
That's my set up also.
lyall29 said:
Is there a way to increase the brightness of the AOD? Mine is hard to see unless I'm in a fairly dark room.
Click to expand...
Click to collapse
Try Settings, Display, Brightness.
gpmg762 said:
Try Settings, Display, Brightness.
Click to expand...
Click to collapse
Thanks, this does seem to be the only way to make the AOD brighter.
"Samsung Flaunt" is a widget you can install, i installed it on mine (you have to select it from widget once installed) as i found certain faces i have time out into a default (black face white hands and red second hand) i didnt want this, i wanted a face of my selection be it downloaded or a pre-installed face to remain on at all times especially if i go out, if you select the "Frontier" face (pre-installed) and have AOD Turned on you lose very little in quality / dimming when the time out kicks in, with "Samsung Flaunt" you install the widget and this then allows you to have the watch face on for up to 30 mins, However it will eat your battery, but then i can live with day to day charging, I like the idea of going out for a meal or a beer with pals and my face being on, i like the idea of a smart watch simulating a "real" watch look, as we all know there are thousands of faces we can select to show off.
S1CAR1US you can change the time out by going settings/Display/Screen Timeout/ then theres a choice of 15 seconds, 30 seconds, 1 minute or 5 minutes, if you select the desired time out, and go back to your normal face, by clicking your bezel one click left (notifications) and one click right (watch face) your face should remain on for that length of time, if this isn't long enough (wasn't for me) i used the "Samsung Flaunt" widget.
Rgds
Is it possible or not to set automatique disable AOD for exemple every day at 23 h to 07 h ?
[email protected] said:
Is it possible or not to set automatique disable AOD for exemple every day at 23 h to 07 h ?
Click to expand...
Click to collapse
Would be very useful, but it is not possible.
I mean you can't set it in system settings, but it is possible to use a "complication" in Gear Watch Designer.
I designed a couple of watch faces setting a complication to turn off AOD every night, was very simple.
slimsta said:
"Samsung Flaunt" is a widget you can install, i installed it on mine (you have to select it from widget once installed) as i found certain faces i have time out into a default (black face white hands and red second hand) i didnt want this, i wanted a face of my selection be it downloaded or a pre-installed face to remain on at all times especially if i go out, if you select the "Frontier" face (pre-installed) and have AOD Turned on you lose very little in quality / dimming when the time out kicks in, with "Samsung Flaunt" you install the widget and this then allows you to have the watch face on for up to 30 mins, However it will eat your battery, but then i can live with day to day charging, I like the idea of going out for a meal or a beer with pals and my face being on, i like the idea of a smart watch simulating a "real" watch look, as we all know there are thousands of faces we can select to show off.
S1CAR1US you can change the time out by going settings/Display/Screen Timeout/ then theres a choice of 15 seconds, 30 seconds, 1 minute or 5 minutes, if you select the desired time out, and go back to your normal face, by clicking your bezel one click left (notifications) and one click right (watch face) your face should remain on for that length of time, if this isn't long enough (wasn't for me) i used the "Samsung Flaunt" widget.
Rgds
Click to expand...
Click to collapse
Where did u install it from.. Cannot find it in playstore store nor Samsung stire
Sent from my Nexus 6P
I went into samsung gear app/samsung Galaxy apps/searched for flaunt, installed and it should sync to widgets on your s3 gear, hope this helps?
Secret section gear 3
lyall29 said:
thanks, this does seem to be the only way to make the aod brighter.
Click to expand...
Click to collapse
if you guys trying fix all the lil things like brightness and touch and sound go settings_gear info_about device_software version when you infront of this click 5x and that will bring up dialer on there then just press *#0*# from here you can mess with brightness and all sorts of stuff if you figure wat *#0011# will help me out been trying bunch old codes from my s3 s5 days alot work on this lil thing and also if anyone figures out how too turn on dev mode cuz of thizzz pm me thanks....
For example if i'm at home or outdoor the AOD keeps low brightness all the time. I think the bright mode is too bright. At least for me. I have seen some other users asking for this too.
Even now, when i'm siting and writing this post the AOD randomly turns on brightness, after a minute turns off, and back on again There's no light change in my room. I have updated to the latest version. Some time ago I saw this feature in rom, but can't remember witch one. Back then developer said it's kernel related feature.
Just throwing some ideas but would be cool if there were an option to only turn on AOD when there is a notification.
tooomins said:
For example if i'm at home or outdoor the AOD keeps low brightness all the time. I think the bright mode is too bright. At least for me. I have seen some other users asking for this too.
Even now, when i'm siting and writing this post the AOD randomly turns on brightness, after a minute turns off, and back on again There's no light change in my room. I have updated to the latest version. Some time ago I saw this feature in rom, but can't remember witch one. Back then developer said it's kernel related feature.
Just throwing some ideas but would be cool if there were an option to only turn on AOD when there is a notification.
Click to expand...
Click to collapse
It's called ambient display. U find it in Superman ROM,amabasadi v20
Such things are not available by now. You have to wait until samsung releases updates
After upgrading my Samsung Galaxy S7 from Android 7 to 8.0 Always On Display is very dark. It's annoying especialy outside during sunny days, the clock is invisible then. Before upgrading it was automaticaly adjusting to the light, in dark room the clock was dark, in the very in illuminated surroundings was very bright. Now auto-brightness doesn't work. Any solution for this problem?
If not is there any chance to roll back to Android 7? I didn't find even one advntage in Android 8 and the problem with AOD is very BIG disadvantage for me.
Jack1760 said:
After upgrading my Samsung Galaxy S7 from Android 7 to 8.0 Always On Display is very dark. It's annoying especialy outside during sunny days, the clock is invisible then. Before upgrading it was automaticaly adjusting to the light, in dark room the clock was dark, in the very in illuminated surroundings was very bright. Now auto-brightness doesn't work. Any solution for this problem?
If not is there any chance to roll back to Android 7? I didn't find even one advntage in Android 8 and the problem with AOD is very BIG disadvantage for me.
Click to expand...
Click to collapse
I had this same problem. I just turned on the automatic brightness.
BTW in my case oreo just prefected my experience with android more smooth interface, longest battery life so far etc.
I have automatic brightness turned on but it doesn't work in AOD mode.
I think the AOD pictures are too dark for sure. i was trying to show someone my siamese cat one i bought outside in the sun and i couldn't see anything. not even the time.
I don't use any picture in AOD mode. I was always using it as a watch to check the time. Now I can't, in sunny days, because the clock is invisible
Hey all,
I just picked up a 7 Pro and it's my first phone without a notification light. What are you all doing to make sure you don't miss important notifications?
On my OnePlus 5 I used to use Light Manager to show me a static (not blinking) light of a different color depending on the notification, so I could glance at my phone and know what notifications were waiting for me. (Especially helpful was a unique color for when my wife texted me. Little quality-of-life stuff like this goes a long way, ya know?)
Now that I don't have a notification light I've tried:
- Ambient Display: This seems too easy to miss a notification after it has passed. Always picking up or tapping on the phone to see notifications is a hassle.
- Always On AMOLED: I've tried two apps by the same name and they both drain my battery horribly, even if I have it set to show only a black screen unless a notification comes in.
- NotifyBuddy: This is close, but the blinking light drives me nuts and I've heard the battery drain is bad here too.
Has anyone found something that works for them and doesn't destroy battery life?
I just pickup my phone and it shows notifications. At first i missed the LED light but not anymore.
I am using this currently and it works really well. What it does is make the built in Horizon light continue to repeat itself according to your chosen settings...much like it should by default but OnePlus dropped the ball!
https://play.google.com/store/apps/details?id=vaf.vishal.plusbeat&hl=en_US
What is the sense of having that "horizon light" if it doesn't actually DO anything? I don't get it... why include it....
jaseman said:
I am using this currently and it works really well. What it does is make the built in Horizon light continue to repeat itself according to your chosen settings...much like it should by default but OnePlus dropped the ball!
https://play.google.com/store/apps/details?id=vaf.vishal.plusbeat&hl=en_US
Click to expand...
Click to collapse
GoodbyeSky said:
Hey all,
I just picked up a 7 Pro and it's my first phone without a notification light. What are you all doing to make sure you don't miss important notifications?
On my OnePlus 5 I used to use Light Manager to show me a static (not blinking) light of a different color depending on the notification, so I could glance at my phone and know what notifications were waiting for me. (Especially helpful was a unique color for when my wife texted me. Little quality-of-life stuff like this goes a long way, ya know?)
Now that I don't have a notification light I've tried:
- Ambient Display: This seems too easy to miss a notification after it has passed. Always picking up or tapping on the phone to see notifications is a hassle.
- Always On AMOLED: I've tried two apps by the same name and they both drain my battery horribly, even if I have it set to show only a black screen unless a notification comes in.
- NotifyBuddy: This is close, but the blinking light drives me nuts and I've heard the battery drain is bad here too.
Has anyone found something that works for them and doesn't destroy battery life?
Click to expand...
Click to collapse
I'm using pulse beat and it works great especially with horizon light
Note: The following post was posted on Samsung Members: I thought I'd post it on here to raise awareness: and to get help.
Recently brought a Samsung Galaxy A51 for a family member, and upon setting the fingerprint and activating the blue light filter: I realised everytime I'm on the lock screen, there's no blue light filter! Upon unlocking, the filter is applied to the rest of the phone. I read on the Samsung forum when someone asked why, that it's like that due to the fingerprint. So why can't the rest of the screen, apart from the fingerprint area, have blue light filter?! Am I expected to burn my eyes whilst trying to look at the time in the middle of the night?! I'm sure with Amoled panels, that each pixel can be controlled, so why hasn't this been applied? Samsung needs to step up their software game as a simple error like this gives a terrible experience. Not the first time something like this occured on a Samsung device.*Furthermore, I tried a third party blue light filter: Twilight which worked fine with the fingerprint. Rather use the in built one as it's lots better.
I'd appreciate any help, thanks!
You can set a Bixby routine to lower the brightness and turn on blue light filter at certain time.
I really like the lockscreen with full brightness, to enjoy the beautiful images of the dynamic wallpapers.
ramping said:
You can set a Bixby routine to lower the brightness and turn on blue light filter at certain time.
I really like the lockscreen with full brightness, to enjoy the beautiful images of the dynamic wallpapers.
Click to expand...
Click to collapse
Thanks for the suggestion. I still think samsung should e automatically implement something to make the lock-screen, eye-frienly at night time. As the screen is really nice, but it hurts your eyes at night. They really,
really need to fix the software as there are a few issues: one of which is that it's buggy.