Has anyone actually gotten EdXposed working on OOS 10.0.2? If so, what were the steps you took to get it working? Following guides ended up in bootloops. Had to uninstall Magisk and reinstall just to get phone working again.
TheKnux said:
Has anyone actually gotten EdXposed working on OOS 10.0.2? If so, what were the steps you took to get it working? Following guides ended up in bootloops. Had to uninstall Magisk and reinstall just to get phone working again.
Click to expand...
Click to collapse
Xposed sucks
spinoza23 said:
Xposed sucks
Click to expand...
Click to collapse
Thanks for your help. ??
https://github.com/ElderDrivers/EdXposed/pull/354
try this.
https://photos.app.goo.gl/5SmQmf96u6Rm7q7Y7
TheKnux said:
Has anyone actually gotten EdXposed working on OOS 10.0.2? If so, what were the steps you took to get it working? Following guides ended up in bootloops. Had to uninstall Magisk and reinstall just to get phone working again.
Click to expand...
Click to collapse
Use taichi instead of edxposed.
Try the links from here:
https://forum.xda-developers.com/xposed/modules/app-gravitybox-v10-0-0-beta-1-android-10-t3974497
TheKnux said:
Has anyone actually gotten EdXposed working on OOS 10.0.2? If so, what were the steps you took to get it working? Following guides ended up in bootloops. Had to uninstall Magisk and reinstall just to get phone working again.
Click to expand...
Click to collapse
It's working fine.
I'm also using gravity box.
---------- Post added at 08:40 AM ---------- Previous post was at 08:38 AM ----------
hallo dare said:
Use taichi instead of edxposed.
Click to expand...
Click to collapse
Chinese developer and no peek under the hood. I'll pass.
Related
After updating to Magisk 17.1 where safety net check is supposed to be fixed I'm still receiving the same invalid response. Any ideas would be helpful.
Try to go settings and turn off Magisk hide and then on.
Only cts is failing in my case
No problem for me.
dgunn said:
After updating to Magisk 17.1 where safety net check is supposed to be fixed I'm still receiving the same invalid response. Any ideas would be helpful.
Click to expand...
Click to collapse
vjendra said:
Only cts is failing in my case
Click to expand...
Click to collapse
Flash the latest Uninstaller followed by 17.1 in twrp without any wipe. That should solve the problem :good:
Sent from my OnePlus6 using XDA Labs
Funk Wizard said:
Flash the latest Uninstaller followed by 17.1 in twrp without any wipe. That should solve the problem :good:
Click to expand...
Click to collapse
This worked but uninstalled all of my mods. Safety net check passed. So I installed the mods again and back to being invalid. Thank you for the fix lol but I broke it again i guess
dgunn said:
This worked but uninstalled all of my mods. Safety net check passed. So I installed the mods again and back to being invalid. Thank you for the fix lol but I broke it again i guess
Click to expand...
Click to collapse
There has been lot of reports for invalid cts, I guess wait for the next update
Sent from my OnePlus6 using XDA Labs
Funk Wizard said:
There has been lot of reports for invalid cts, I guess wait for the next update
Sent from my OnePlus6 using XDA Labs
Click to expand...
Click to collapse
Thank you will do. As long as everything works in not worried about it really. Just never seen it before and no one had an answer for 17.1.
i just updated the magisk manager and didn't update to 17.1 but after the check it says all good even with all modules installed so good to see its working again.
dgunn said:
After updating to Magisk 17.1 where safety net check is supposed to be fixed I'm still receiving the same invalid response. Any ideas would be helpful.
Click to expand...
Click to collapse
same problem here
i installed the manager first and it passed all checks and after a reboot i installed the 17.1 update and after reboot everything still passed so i can confirm its working.
Which OS is everyone using?
mykenyc said:
Which OS is everyone using?
Click to expand...
Click to collapse
5.1.1
Sent from my OnePlus6 using XDA Labs
There's no way for me to pass ctsprofile... I never used a custom rom, and today I flashed the open beta, then I flashed magisk uninstaller and then the 17.1 magisk. No way to pass ctsprofile for me...
Jack_Sparrow_ said:
There's no way for me to pass ctsprofile... I never used a custom rom, and today I flashed the open beta, then I flashed magisk uninstaller and then the 17.1 magisk. No way to pass ctsprofile for me...
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-6/how-to/guild-to-pass-safetynet-oxygen-android-t3838123
justen7723 said:
https://forum.xda-developers.com/oneplus-6/how-to/guild-to-pass-safetynet-oxygen-android-t3838123
Click to expand...
Click to collapse
Thanks, this worked!!!
dgunn said:
After updating to Magisk 17.1 where safety net check is supposed to be fixed I'm still receiving the same invalid response. Any ideas would be helpful.
Click to expand...
Click to collapse
Same here I've installed Magisks 17.1 on two different stock samsung devices now but can't pass both SafteyNet checks on either devise, installed Via:
magisks manager -> patched boot.img -> flashed patched boot image with Odin while under samsung download mode.
Ticked hide apps within Magisks but they just keep unticking themselves
Redundant. Delete
Deacon-Frost said:
Try to go settings and turn off Magisk hide and then on.
Click to expand...
Click to collapse
Turning off magisk hide results in CTS profile failure and basic Integrity failure. Changing the fingerprint as suggested in build prop did nothing and continued to give invalid response.
I occasionally need to log in to Snapchat again and it won't let you while you are rooted even with Magisk hide.
I can't seem to just uninstall Magisk through the Magisk manager without getting a bootloop and having to start all over. I have Magisk and TWRP and am wondering if there is a quick way to do it. Currently I have to do the local upgrade to the version I'm already using, restart, login, install Magisk again, and install TWRP again. There has to be an easier way?
Mibuix0r said:
I occasionally need to log in to Snapchat again and it won't let you while you are rooted even with Magisk hide.
I can't seem to just uninstall Magisk through the Magisk manager without getting a bootloop and having to start all over. I have Magisk and TWRP and am wondering if there is a quick way to do it. Currently I have to do the local upgrade to the version I'm already using, restart, login, install Magisk again, and install TWRP again. There has to be an easier way?
Click to expand...
Click to collapse
Boot TWRP select flash image file flash stock boot image reboot
mac796 said:
Boot TWRP select flash image file flash stock boot image reboot
Click to expand...
Click to collapse
So I would boot in to TWRP, flash the stock one of these https://androidfilehost.com/?w=files&flid=295182 , boot back to system, do my snapchat crap, boot back to twrp, flash the patched one? You have done this successfully?
Mibuix0r said:
So I would boot in to TWRP, flash the stock one of these https://androidfilehost.com/?w=files&flid=295182 , boot back to system, do my snapchat crap, boot back to twrp, flash the patched one? You have done this successfully?
Click to expand...
Click to collapse
It will put you back to stock make sure you flash the boot image for your phone the SnapChat thing I don't know I've never used it
It will also remove every module you had so you'll have to reflash them later
Mibuix0r said:
I occasionally need to log in to Snapchat again and it won't let you while you are rooted even with Magisk hide.
I can't seem to just uninstall Magisk through the Magisk manager without getting a bootloop and having to start all over. I have Magisk and TWRP and am wondering if there is a quick way to do it. Currently I have to do the local upgrade to the version I'm already using, restart, login, install Magisk again, and install TWRP again. There has to be an easier way?
Click to expand...
Click to collapse
I am rooted on international firmware and have no issue with snapchat login. Is there something else you modified?
Ogplya said:
I am rooted on international firmware and have no issue with snapchat login. Is there something else you modified?
Click to expand...
Click to collapse
I'm fairly certain its the EdXposed that it detects. I really love the blacknavigationbar, gravitybox, and minminguard modules though.
Mibuix0r said:
I'm fairly certain its the EdXposed that it detects. I really love the blacknavigationbar, gravitybox, and minminguard modules though.
Click to expand...
Click to collapse
Have you ever thought about disabling those modules rebooting and logging into Snapchat? Then enabling the modules again?
bp328i said:
Have you ever thought about disabling those modules rebooting and logging into Snapchat? Then enabling the modules again?
Click to expand...
Click to collapse
I dont think its the modules I think you have to uninstall EdXposed from Magisk, unroot, and log in.
I tried just unrooting and didn't uninstall EdXposed this morning and my account got locked for 24 hours so I guess I'll try to remove EdXposed tomorrow and see if that works.
Mibuix0r said:
I dont think its the modules I think you have to uninstall EdXposed from Magisk, unroot, and log in.
Click to expand...
Click to collapse
Gotcha, I don't use EdXposed so I wasn't sure if it was just a module you could disable. But I have no problems with logging into Snapchat with Magisk hide.
I switch between phones quite often and when I log into Snapchat on one it automatically logs me out of the other one and I never have a problem logging back in.
---------- Post added at 06:31 PM ---------- Previous post was at 06:29 PM ----------
Mibuix0r said:
I dont think its the modules I think you have to uninstall EdXposed from Magisk, unroot, and log in.
I tried just unrooting and didn't uninstall EdXposed this morning and my account got locked for 24 hours so I guess I'll try to remove EdXposed tomorrow and see if that works.
Click to expand...
Click to collapse
Maybe try titanium backup and just restore Snapchat?
bp328i said:
Gotcha, I don't use EdXposed so I wasn't sure if it was just a module you could disable. But I have no problems with logging into Snapchat with Magisk hide.
I switch between phones quite often and when I log into Snapchat on one it automatically logs me out of the other one and I never have a problem logging back in.
---------- Post added at 06:31 PM ---------- Previous post was at 06:29 PM ----------
Maybe try titanium backup and just restore Snapchat?
Click to expand...
Click to collapse
I tried the backup route before and that doesn't seem to work anymore heh
FYI, after removing EdXposed, removing root, signing in to Snapchat, then reinstalling everything it seems to be working haha. What a PITA Snapchat
I just make sure I'm passing safetynet in Magisk any sc works, occasionally I get force closes, but if I'm passing safety net uninstalling and reinstalling fixes the force closes
explosivequack said:
I just make sure I'm passing safetynet in Magisk any sc works, occasionally I get force closes, but if I'm passing safety net uninstalling and reinstalling fixes the force closes
Click to expand...
Click to collapse
Yeah I'm definitely failing those, most likely due to EdXposed
Mibuix0r said:
Yeah I'm definitely failing those, most likely due to EdXposed
Click to expand...
Click to collapse
Try uninstalling EdXposed and checking it, I've got EdXposed installed with an ad blocker and gravitybox p and my safetynet passes no problem.
explosivequack said:
Try uninstalling EdXposed and checking it, I've got EdXposed installed with an ad blocker and gravitybox p and my safetynet passes no problem.
Click to expand...
Click to collapse
I uninstalled EdXposed and it passed the safetynet checks i dunno how you pass with it installed haha
What EdXposed are you using? I'm still using magisk-EdXposed-SandHook-v.0.4.3.2_alpha-release.zip
Mibuix0r said:
I uninstalled EdXposed and it passed the safetynet checks i dunno how you pass with it installed haha
What EdXposed are you using? I'm still using magisk-EdXposed-SandHook-v.0.4.3.2_alpha-release.zip
Click to expand...
Click to collapse
which version of EdXposed are u using Sandhook or Yahfa
I have Yahfa installed with GravityBox and I pass safetynet too
Bradl79 said:
which version of EdXposed are u using Sandhook or Yahfa
I have Yahfa installed with GravityBox and I pass safetynet too
Click to expand...
Click to collapse
I passed!!!! I am locked out from Snapchat for a bit but I will try again in 24 hours haha. Thanks a ton.
I had successfully flashed Riru Core module and EdXposed Sandhook through Magisk yesterday. Everything was working fine, safetynet and all that stuff. However, Flat Style Bar Indicator wasn't working perfectly for me. I read that the Yahfa version might help with it, so I installed it without uninstalling Sandhook version first.
But now the phone gets stuck on boot logo indefinitely. I forcibly entered the Fastboot mode and went to TWRP recovery using my laptop. I uninstalled Magisk and reinstalled it. Device booted fine now.
Next, I flashed Riru module only and rebooted. It did reboot.
Next, I installed EdXposed Yahfa. Rebooted but stuck on boot logo again. Uninstalled Magisk and repeated the process with Sandhook. Same result again.
I uninstalled EdXposed using the official zip and tried reinstalling. Still no luck. I don't understand what I am doing wrong. I really want to use Exi and Xposed Edge. Please someone help me with this.
iamMG said:
I had successfully flashed Riru Core module and EdXposed Sandhook through Magisk yesterday. Everything was working fine, safetynet and all that stuff. However, Flat Style Bar Indicator wasn't working perfectly for me. I read that the Yahfa version might help with it, so I installed it without uninstalling Sandhook version first.
But now the phone gets stuck on boot logo indefinitely. I forcibly entered the Fastboot mode and went to TWRP recovery using my laptop. I uninstalled Magisk and reinstalled it. Device booted fine now.
Next, I flashed Riru module only and rebooted. It did reboot.
Next, I installed EdXposed Yahfa. Rebooted but stuck on boot logo again. Uninstalled Magisk and repeated the process with Sandhook. Same result again.
I uninstalled EdXposed using the official zip and tried reinstalling. Still no luck. I don't understand what I am doing wrong. I really want to use Exi and Xposed Edge. Please someone help me with this.
Click to expand...
Click to collapse
As far as I'm aware you HAVE to use sandhook with op7p. It always works for me. I also use exi as well...
skj8100 said:
As far as I'm aware you HAVE to use sandhook with op7p. It always works for me. I also use exi as well...
Click to expand...
Click to collapse
I get that. But the problem is, I am unable to make it work AT ALL. I am getting stuck at Boot logo if EdXposed zip has been flashed through Magisk.
iamMG said:
I get that. But the problem is, I am unable to make it work AT ALL. I am getting stuck at Boot logo if EdXposed zip has been flashed through Magisk.
Click to expand...
Click to collapse
Worst case scenario use this for i know it works:
https://forum.xda-developers.com/oneplus-7-pro/how-to/root-oneplus-7-pro-install-magisk-t3931256
---------- Post added at 05:35 PM ---------- Previous post was at 05:32 PM ----------
skj8100 said:
Worst case scenario use this for i know it works:
https://forum.xda-developers.com/oneplus-7-pro/how-to/root-oneplus-7-pro-install-magisk-t3931256
Click to expand...
Click to collapse
Just make sure follow steps after "xposed" once you get it to boot (wipe, restore, whatever)
skj8100 said:
As far as I'm aware you HAVE to use sandhook with op7p. It always works for me. I also use exi as well...
Click to expand...
Click to collapse
I just installed the yahfa one seems to be running great, I'm just using gravity box, and still passing safety net
skj8100 said:
Worst case scenario use this for i know it works
Click to expand...
Click to collapse
Funnily enough, I used this exact post to install Xposed.
skj8100 said:
Just make sure follow steps after "xposed" once you get it to boot (wipe, restore, whatever)
Click to expand...
Click to collapse
This part doesn't mention anything about wiping the internal storage.
iamMG said:
Funnily enough, I used this exact post to install Xposed.
This part doesn't mention anything about wiping the internal storage.
Click to expand...
Click to collapse
I just meant if ultimately you were unsuccessful in getting it to boot properly as last resort... I assumed you cold get it back to stock rooted- sorry if I was unclear
Anyone else running EdXposed and gravityBox on 9.5.8 and passing safetynet? which version of Edxposed are you running? sandhook or yahfa?
I made a thread to show how to remove magisk modules due to bootloops, check in the guide section.
equlizer said:
Anyone else running EdXposed and gravityBox on 9.5.8 and passing safetynet? which version of Edxposed are you running? sandhook or yahfa?
Click to expand...
Click to collapse
Running Yahfa, safetynet passing.
I just got sandhook installed and gravitybox. Everything working Time to tinker!
iamMG said:
I had successfully flashed Riru Core module and EdXposed Sandhook through Magisk yesterday. Everything was working fine, safetynet and all that stuff. However, Flat Style Bar Indicator wasn't working perfectly for me. I read that the Yahfa version might help with it, so I installed it without uninstalling Sandhook version first.
But now the phone gets stuck on boot logo indefinitely. I forcibly entered the Fastboot mode and went to TWRP recovery using my laptop. I uninstalled Magisk and reinstalled it. Device booted fine now.
Next, I flashed Riru module only and rebooted. It did reboot.
Next, I installed EdXposed Yahfa. Rebooted but stuck on boot logo again. Uninstalled Magisk and repeated the process with Sandhook. Same result again.
I uninstalled EdXposed using the official zip and tried reinstalling. Still no luck. I don't understand what I am doing wrong. I really want to use Exi and Xposed Edge. Please someone help me with this.
Click to expand...
Click to collapse
were you able to make it work?
Dwr3ker said:
were you able to make it work?
Click to expand...
Click to collapse
I had to do a full reset.
Hi!
i rooted my oneplus 6 twice already, the root has been successful. But as soon as i try to install Xposed through Magisk, i install the modules (the latest from their website) and reboot, i am stuck in the boot window, in other words, a brick..
i have android 9.0.9
Thanks!
fenixsword said:
Hi!
i rooted my oneplus 6 twice already, the root has been successful. But as soon as i try to install Xposed through Magisk, i install the modules (the latest from their website) and reboot, i am stuck in the boot window, in other words, a brick..
i have android 9.0.9
Thanks!
Click to expand...
Click to collapse
If you have twrp and still have access to it. This should be installed and run inside twrp. It will enable you to disable modules without booting your phone. As for why your module isn't working, I'm not sure. But at least this will save you and allowyou to boot again without losing data.
https://forum.xda-developers.com/apps/magisk/tool-magisk-module-manager-recovery-t3917498
thejase said:
If you have twrp and still have access to it. This should be installed and run inside twrp. It will enable you to disable modules without booting your phone. As for why your module isn't working, I'm not sure. But at least this will save you and allowyou to boot again without losing data.
https://forum.xda-developers.com/apps/magisk/tool-magisk-module-manager-recovery-t3917498
Click to expand...
Click to collapse
and how do i use this tweak to bypass bootloop?
fenixsword said:
and how do i use this tweak to bypass bootloop?
Click to expand...
Click to collapse
That didn't work for me when I tried it. Sorry. Try this which I have actually used before. Unimod. Follow directions there. https://magiskroot.net/uninstall-magisk-module-twrp/
thejase said:
If you have twrp and still have access to it. This should be installed and run inside twrp. It will enable you to disable modules without booting your phone. As for why your module isn't working, I'm not sure. But at least this will save you and allowyou to boot again without losing data.
https://forum.xda-developers.com/apps/magisk/tool-magisk-module-manager-recovery-t3917498
Click to expand...
Click to collapse
actually it worked great! helped me a couple of times now.. I just installed older version of exposed and that's it.. works as charm
fenixsword said:
actually it worked great! helped me a couple of times now.. I just installed older version of exposed and that's it.. works as charm
Click to expand...
Click to collapse
Glad it worked for you!
I decided to update my beloved OnePlus 7 Pro from OOS 10.0.3 to OOS 10.0.4 through TWRP after downloading the OOS 10.0.4 full zip from Oxygen OS Updater. After flashing the full zip and TWRP, I flashed latest magisk zip. Then rebooted and suddenly I noticed that baseband was unknown and IMEis were missing. I downloaded & flashed again the full 10.0.4 zip alongside latest TWRP and Magisk but still facing the aforementioned issue. Then I just flashed the full OOS zip so I could receive calls. Tried with flashing patched boot image but the issue persists.
I came across some commands that would fix this issue over Terminal in TWRP but useless...
I do state that I have the GM1913 EU OP7Pro
Has anyone so far encounter this issue and if yes, how did you manage to get past over this issue?
Help will be very appreciated!
You can try the MSM tool.
Have you tried disabling and deleting all magisk modules before flashing a rom.?
---------- Post added at 11:32 AM ---------- Previous post was at 11:26 AM ----------
I happened to experience loosing IMEI after updating to 10.0.2 .. what i just did was simply switch to other bootslot. Disable all magisk modules.. then reflash the full rom.. not by TWRP.. BUT thru local upgrade in system updater..then withoit rebooting.
Install Magisk to inactive slot.. then reboot..
This steps loose my Twrp.. but i just simply reinstall twrp via magisk module.. then install magisk thru direct install, then reboot to recovery... Boom..all.is well..
mholloway said:
You can try the MSM tool.
Click to expand...
Click to collapse
Thanks for your suggestion
santiagoruel13 said:
Have you tried disabling and deleting all magisk modules before flashing a rom.?
---------- Post added at 11:32 AM ---------- Previous post was at 11:26 AM ----------
I happened to experience loosing IMEI after updating to 10.0.2 .. what i just did was simply switch to other bootslot. Disable all magisk modules.. then reflash the full rom.. not by TWRP.. BUT thru local upgrade in system updater..then withoit rebooting.
Install Magisk to inactive slot.. then reboot..
This steps loose my Twrp.. but i just simply reinstall twrp via magisk module.. then install magisk thru direct install, then reboot to recovery... Boom..all.is well..
Click to expand...
Click to collapse
Thanks so much for saving me from a headache (and whatnot)! I don't usually disable Magisk modules while I update OOS(I learned my lesson) but I gave a try after you replied and apparently one of the modules (OOS Native Call Recording Enabler) was causing the whole issue! So I have to live without that module till it gets updated but at least I got my baseband and IMEIs back!
Thanksss so much once again! My issue got resolved!
Nexus4life said:
Thanks so much for saving me from a headache (and whatnot)! I don't usually disable Magisk modules while I update OOS(I learned my lesson) but I gave a try after you replied and apparently one of the modules (OOS Native Call Recording Enabler) was causing the whole issue! So I have to live without that module till it gets updated but at least I got my baseband and IMEIs back!
Thanksss so much once again! My issue got resolved!
Click to expand...
Click to collapse
For OOS Native Call Recording use jonePlus from playstore
zelenko said:
For OOS Native Call Recording use jonePlus from playstore
Click to expand...
Click to collapse
Thanks so much mate, I got OOS Native Call Recording back along with a ton of other customisations!
Really appreciate your suggestion!
Nexus4life said:
Thanks so much mate, I got OOS Native Call Recording back along with a ton of other customisations!
Really appreciate your suggestion!
Click to expand...
Click to collapse
Mine keeps asking for permissions, but all permissions given, but still won't open recordings, how did yours go.
NHNXDA said:
Mine keeps asking for permissions, but all permissions given, but still won't open recordings, how did yours go.
Click to expand...
Click to collapse
Mine worked on the beginning but after I rebooted, call recording isn't be available on my caller id screen unless I run the app first so Magsik can grant permissions.