Hello guys!
The story began, when I accidently installed a stock OTS update by OP onto my already rooted OP6 with Magsik and TWRP, running a NoLimits ROM...
I just noticed, that the phone said "restart to finish OTS upgrade" or some kind of thing..... I always had the notification on my screen that an update would be available....what surely was ignored because running NoLimits ROM.... but because of some unknown reason, the stock update installed itself magically...
So I ended up finding my phone in complete stock condition, just the unlocked bootloader remained..... F*CK!
I tried to go back to root by trying to install TWRP via fastboot...and that was the beginnig of the end...
By fastboot boot twrp.img, the phone just remained in fastboot mode..... no twrp screen showed up... repeated this a few times, nothing changed....
Somewhere here I read to look up the current slot.... so I did fastboot getvar current-slot.... and after slot b was shown, I flashed twrp into slot b by fastboot flash boot_b twrp.img..... which had the phone stuck in screen "the bootloader is unlocked.....".... so i think that's what is called a BRICK...?
Please guys, help me out...as I don't know how to go on.... I also tried to flash stock boot img from here via fastboot, what didn't work either....
Would be glad for any suggestions...
Thanks!
Alex
dr.zikzak said:
Hello guys!
The story began, when I accidently installed a stock OTS update by OP onto my already rooted OP6 with Magsik and TWRP, running a NoLimits ROM...
I just noticed, that the phone said "restart to finish OTS upgrade" or some kind of thing..... I always had the notification on my screen that an update would be available....what surely was ignored because running NoLimits ROM.... but because of some unknown reason, the stock update installed itself magically...
So I ended up finding my phone in complete stock condition, just the unlocked bootloader remained..... F*CK!
I tried to go back to root by trying to install TWRP via fastboot...and that was the beginnig of the end...
By fastboot boot twrp.img, the phone just remained in fastboot mode..... no twrp screen showed up... repeated this a few times, nothing changed....
Somewhere here I read to look up the current slot.... so I did fastboot getvar current-slot.... and after slot b was shown, I flashed twrp into slot b by fastboot flash boot_b twrp.img..... which had the phone stuck in screen "the bootloader is unlocked.....".... so i think that's what is called a BRICK...?
Please guys, help me out...as I don't know how to go on.... I also tried to flash stock boot img from here via fastboot, what didn't work either....
Would be glad for any suggestions...
Thanks!
Alex
Click to expand...
Click to collapse
i remember that NoLIMIT rom mustbe uninstall before update the oos.In your case i think it was bootloop,softbrick.You boot into fastboob mood and use fastboot rom. and you can root and instant TWRP again.
soihuvuontrang said:
i remember that NoLIMIT rom mustbe uninstall before update the oos.In your case i think it was bootloop,softbrick.You boot into fastboob mood and use fastboot rom. and you can root and instant TWRP again.
Click to expand...
Click to collapse
Hello!
Nothing is working at the moment, just fastboot... not recovery mode, no booting into the OTS...
Tried to use MSM tool but it can't even find the right port....at first, I had COM3 and COM4 showing up, but only N/A....
Now i uninstalled the qualcom drivers as suggested in an unbrick thread of the OP 5T, but that made every port disappear in the MSM tool list.... I'm f*cked I guess...
How can I fix that driver mess again? (driver signing is disabled in bios, testmode is available an working on my pc)
Thanks,
Alex
dr.zikzak said:
Hello!
Nothing is working at the moment, just fastboot... not recovery mode, no booting into the OTS...
Tried to use MSM tool but it can't even find the right port....at first, I had COM3 and COM4 showing up, but only N/A....
Now i uninstalled the qualcom drivers as suggested in an unbrick thread of the OP 5T, but that made every port disappear in the MSM tool list.... I'm f*cked I guess...
How can I fix that driver mess again? (driver signing is disabled in bios, testmode is available an working on my pc)
Thanks,
Alex
Click to expand...
Click to collapse
If you can access fastboot mode you can try follow procedure in next thread:
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
I could recover my system with this @mauronofrio tool a couple of times. In fact, i never have used MSM tool.
dr.zikzak said:
Hello!
Nothing is working at the moment, just fastboot... not recovery mode, no booting into the OTS...
Tried to use MSM tool but it can't even find the right port....at first, I had COM3 and COM4 showing up, but only N/A....
Now i uninstalled the qualcom drivers as suggested in an unbrick thread of the OP 5T, but that made every port disappear in the MSM tool list.... I'm f*cked I guess...
How can I fix that driver mess again? (driver signing is disabled in bios, testmode is available an working on my pc)
Thanks,
Alex
Click to expand...
Click to collapse
boot in to fastboot mode and your fone is not brick,so msm tool isn't used .
you can download newest driver for oneplus on google.
and you can find on forum. hope you will be successful
Kurtinaitis said:
If you can access fastboot mode you can try follow procedure in next thread:
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
I could recover my system with this @mauronofrio tool a couple of times. In fact, i never have used MSM tool.
Click to expand...
Click to collapse
I'll have a try..,.thanks for that!
Regards,
Alex
The method of @mauronofrio worked!!! Thanks a lot!
But I still can't boot twrp on the phone....if I do so, the phone boots into fastboot mode again and freezes at "1+ logo" with "Fastboot Mode" below it..... same like before? The device is fully wiped now...
So how can I get TWRP working again...??
I also tried fastboot flash recovery twrp.img -> no such partition..... don't know why it worked the first time I did it, root and custom ROM without any issues...
Thanks,
Alex
dr.zikzak said:
The method of @mauronofrio worked!!! Thanks a lot!
But I still can't boot twrp on the phone....if I do so, the phone boots into fastboot mode again and freezes at "1+ logo" with "Fastboot Mode" below it..... same like before? The device is fully wiped now...
So how can I get TWRP working again...??
Thanks,
Alex
Click to expand...
Click to collapse
It seems a problem with TWRP version or Fastboot command.
Please, describe your method to flash TWRP and which version do you want to flash
Kurtinaitis said:
It seems a problem with TWRP version or Fastboot command.
Please, describe your method to flash TWRP and which version do you want to flash
Click to expand...
Click to collapse
I downloaded latest twrp-3-3-1.2 (I think) for my OP6, copied the belonging .zip file to my phone... started cmd as admin, typed fastboot devices....the device showed up, then fastboot boot twrp...........img.....enter, and afterwards the "1+" logo showed up, below it read Fastboot Mode...and nothing ever happened... till i switched the phone off again after 10 minutes...
Wrong version you think?
Thanks,
Alex
If you are on Android 10 try to download last version from Mauronofrio or last from Blu-Spark (V9.109). I use blu_spark with OOS 10.3.3
Sometimes the command for being able to boot in recovery from Fastboot is:
Fastboot flash boot "nameofTWRPimage".img
Flash a patched boot image of your rom via fastboot and than flash twrp installer through magisk manager. Done.
Kurtinaitis said:
If you are on Android 10 try to download last version from Mauronofrio or last from Blu-Spark (V9.109). I use blu_spark with OOS 10.3.3
Sometimes the command for being able to boot in recovery from Fastboot is:
Fastboot flash boot "nameofTWRPimage".img
Click to expand...
Click to collapse
Yes that worked for me last time I attempted root.
TWRP update - no boot into system
Hello guys....it's me again!
After getting everything working again because of the tremendous help of this forum, i tried to update my twrp recovery via twrp by installing the twrp zip-file...
Afterwards, i tried to upgrade my rom from NoLimits 11.2 to 11.5 - but the phone didn't boot afterwards....i've always ended up in the recovery menue....
I then changed slots (from b to a) in the recovery, and then, the phone booted again....but into the stock ROM...
I can't change slots again now and have stock rom in slot a as it seams.... how can i change that again? how can i flash the custom rom in the right slot again?
Thanks in advance!
Regards,
Alex
dr.zikzak said:
Hello guys....it's me again!
After getting everything working again because of the tremendous help of this forum, i tried to update my twrp recovery via twrp by installing the twrp zip-file...
Afterwards, i tried to upgrade my rom from NoLimits 11.2 to 11.5 - but the phone didn't boot afterwards....i've always ended up in the recovery menue....
I then changed slots (from b to a) in the recovery, and then, the phone booted again....but into the stock ROM...
I can't change slots again now and have stock rom in slot a as it seams.... how can i change that again? how can i flash the custom rom in the right slot again?
Thanks in advance!
Regards,
Alex
Click to expand...
Click to collapse
It's OK. That's the point of having 2 slots system. Be able to recover the other partition if something goes wrong.
So now... Do you have TWRP or stock recovery?
You can dirty flash stock on the inactive Slot.
I would install stock rom in inactive slot through Local Update un System updater, don't reboot, install TWRP retention script in Magisk Manager (of course only if you have a proper TWRP running, if not avoid this step), don't reboot, install magisk to inactive Slot (through Magisk Manager), reboot.
After that you Will have stock on both partitions. You can try again the XXX Update.
Kurtinaitis said:
It's OK. That's the point of having 2 slots system. Be able to recover the other partition if something goes wrong.
So now... Do you have TWRP or stock recovery?
You can dirty flash stock on the inactive Slot.
I would install stock rom in inactive slot through Local Update un System updater, don't reboot, install TWRP retention script in Magisk Manager (of course only if you have a proper TWRP running, if not avoid this step), don't reboot, install magisk to inactive Slot (through Magisk Manager), reboot.
After that you Will have stock on both partitions. You can try again the XXX Update.
Click to expand...
Click to collapse
Thanks for the fast answer!
I think TWRP is working, nur on slot B - the question is: how come that i Installed TWRP Update via TWRP Recovery, was able to reboot Ingo recovery, and after Flash of the ROM via TWRP, only TWRP Recovery was left... No bootable ROM, so i tried Slot A and that was Stock Rom...
How can i install stock ROM into Slot B if Slot A is currently 'running'?
Regards,
Alex
dr.zikzak said:
Thanks for the fast answer!
I think TWRP is working, nur on slot B - the question is: how come that i Installed TWRP Update via TWRP Recovery, was able to reboot Ingo recovery, and after Flash of the ROM via TWRP, only TWRP Recovery was left... No bootable ROM, so i tried Slot A and that was Stock Rom...
How can i install stock ROM into Slot B if Slot A is currently 'running'?
Regards,
Alex
Click to expand...
Click to collapse
Since Oxygen Os Updater > Local Upgrade.
Download 10.3.4 OOS and put in your internal Storage. Then follow procedure i wrote before
Kurtinaitis said:
Since Oxygen Os Updater > Local Upgrade.
Download 10.3.4 OOS and put in your internal Storage. Then follow procedure i wrote before
Click to expand...
Click to collapse
NOTE: don't reboot until you install Magisk to inactive Slot, and of course, as you're rooted must download Full Zip (not incremental)
Kurtinaitis said:
NOTE: don't reboot until you install Magisk to inactive Slot, and of course, as you're rooted must download Full Zip (not incremental)
Click to expand...
Click to collapse
I downloaded Oxygen Updater, also OOS 10.3.4, but in my system stettings, update button is greyed out.... with the nolimits ROM before, I once had issues that the OEM update got installed...so that led to my problem which made me open up this thread in the first place.... so i disabled system update via titanium backup when I had root access...
So now it's greyed out...but as it is the stock rom, it shouldn't be greyed out as titanium backup doesn't work at the moment, without root...
Should i flash via @mauronofrio's method and fully wipe the device?... would be a pain in the a.. as everything gets erased again, setting up from scratch 2 times within 3 weeks
Regards,
Alex
Would it be possible to install magisk without twrp, and then flash the NoLimits ROM via Magisk?
TWRP recovery must be there....only in slot B - i tried to change slot by fastboot --set-active=..... but it didn't work, unknown command
Regards,
Alex
dr.zikzak said:
I downloaded Oxygen Updater, also OOS 10.3.4, but in my system stettings, update button is greyed out.... with the nolimits ROM before, I once had issues that the OEM update got installed...so that led to my problem which made me open up this thread in the first place.... so i disabled system update via titanium backup when I had root access...
So now it's greyed out...but as it is the stock rom, it shouldn't be greyed out as titanium backup doesn't work at the moment, without root...
Should i flash via @mauronofrio's method and fully wipe the device?... would be a pain in the a.. as everything gets erased again, setting up from scratch 2 times within 3 weeks
Regards,
Alex
Click to expand...
Click to collapse
Did you try to install the Update since the app Oxygen Updater?
---------- Post added at 09:08 PM ---------- Previous post was at 09:02 PM ----------
dr.zikzak said:
Would it be possible to install magisk without twrp, and then flash the NoLimits ROM via Magisk?
TWRP recovery must be there....only in slot B - i tried to change slot by fastboot --set-active=..... but it didn't work, unknown command
Regards,
Alex
Click to expand...
Click to collapse
I think there's some thread in Guides and News in which OP uploads some patched boot.img le something like that to have root but i never tried.
Hi all,
update: I made update at the end.
My OP7 version is GM1900, so far I was on build 10.0.6GM57BA with Magisk 20.4, but for some time I had 10.0.8 update notification.
Today I decided to update build.
I consider myself as medium experienced user the type that is using rather step by step guides.
But this time I thought I don't need guide cause I should remember how I did update last time. In the meantime I help my son to make homework what was an additional distraction.
I always download full OTA from oneplus.com support but it turned out there was no 10.0.8 (instead there was/is 10.0.7). So I tried to search for 10.0.8 and I found this xda news. As there is a mess with versions and links and I was doing it on mobile Chrome I accidentally tapped Global/India Full OTA
Steps I made:
1.1. Downloading file OnePlus7Oxygen_14.P.29_OTA_029_all_2009152124_ba2424a.zip
1.2. Downloading official TWRP twrp-installer-3.4.0-0-guacamole.zip
1.3. Boot into TWRP.
1.4. Flash twrp-installer-3.4.0-0-guacamole.zip
1.5. Restart to TWRP
1.6. Flash magisk uninstall
1.7. Flash 10.3.5 (India & Global) - OnePlus7Oxygen_14.P.29_OTA_029_all_2009152124_ba2424a.zip
1.8. Flash magisk 20.1 (but forgot to reboot after flashing TWRP it was first mistake I think)
1.9. Ended with 10.3.5 (India & Global) build with stock recovery and without Magisk.
Next I tried to return to GM57BA.
Then the steps I made:
2.1. Downloading official build 10.0.7.GM57BA from oneplus support site.
2.2. Downloading Mauronofrio's TWRP twrp-3.4.0-0-guacamole-unified-Q-mauronofrio.img and twrp-3.4.0-0-guacamole-unified-installer-mauronofrio.zip
2.3. Boot OP7 into fastboot then command "fastboot boot twrp-3.4.0-0-guacamole-unified-Q-mauronofrio.img"
2.4. After phone booted into TWRP I flashed twrp-3.4.0-0-guacamole-unified-installer-mauronofrio.zip
2.5. Restart to TWRP
2.6. Flashed magisk uninstall.
2.7. Flashed 10.0.7.GM57BA
2.8. Flashed magisk 20.4
2.9. Only then I rebooted to TWRP (I think it was mistake).
2.10. Then I saw first problem - there was no lockscreen security with TWRP (unlock pattern).
2.11. Restarted to TWRP again - the same no unlock pattern screen, no access to data partition
2.12. I started to panic and restarted into system.
2.13. I ended with hard bootloop - I mean I can't even do force reset (force reboot) by pressing and holding the Power and Volume down buttons at the same time :crying:
I'm sorry for this long description but I thought it will be helpful to diagnose what I messed up.
Questions and my thoughts:
1. Did I messed up by not restarting after last magisk flash?
2. What to do now? Do I need to wait for battery discharge? Then unbrick using MSM tool?
3. Is there any chance to repair and preserve personal data? I have TWRP backup about 3 months old. Maybe after battery discharge I should go to TWRP and then sideload this backup? Maybe magisk uninstall or stock boot image flash?
Please help
Update:
After battery discharge I managed to boot into TWRP recovery (Mauronofrio's 3.4.0.0)
Then couldn't access /data
But when I switched to Slot B and reboot to recovery situation is back to normal (I guess).
I'm still in recovery scared to boot into system.
What to do now?
kold11 said:
Hi all,
update: I made update at the end.
My OP7 version is GM1900, so far I was on build 10.0.6GM57BA with Magisk 20.4, but for some time I had 10.0.8 update notification.
Today I decided to update build.
I consider myself as medium experienced user the type that is using rather step by step guides.
But this time I thought I don't need guide cause I should remember how I did update last time. In the meantime I help my son to make homework what was an additional distraction.
I always download full OTA from oneplus.com support but it turned out there was no 10.0.8 (instead there was/is 10.0.7). So I tried to search for 10.0.8 and I found this xda news. As there is a mess with versions and links and I was doing it on mobile Chrome I accidentally tapped Global/India Full OTA
Steps I made:
1.1. Downloading file OnePlus7Oxygen_14.P.29_OTA_029_all_2009152124_ba2424a.zip
1.2. Downloading official TWRP twrp-installer-3.4.0-0-guacamole.zip
1.3. Boot into TWRP.
1.4. Flash twrp-installer-3.4.0-0-guacamole.zip
1.5. Restart to TWRP
1.6. Flash magisk uninstall
1.7. Flash 10.3.5 (India & Global) - OnePlus7Oxygen_14.P.29_OTA_029_all_2009152124_ba2424a.zip
1.8. Flash magisk 20.1 (but forgot to reboot after flashing TWRP it was first mistake I think)
1.9. Ended with 10.3.5 (India & Global) build with stock recovery and without Magisk.
Next I tried to return to GM57BA.
Then the steps I made:
2.1. Downloading official build 10.0.7.GM57BA from oneplus support site.
2.2. Downloading Mauronofrio's TWRP twrp-3.4.0-0-guacamole-unified-Q-mauronofrio.img and twrp-3.4.0-0-guacamole-unified-installer-mauronofrio.zip
2.3. Boot OP7 into fastboot then command "fastboot boot twrp-3.4.0-0-guacamole-unified-Q-mauronofrio.img"
2.4. After phone booted into TWRP I flashed twrp-3.4.0-0-guacamole-unified-installer-mauronofrio.zip
2.5. Restart to TWRP
2.6. Flashed magisk uninstall.
2.7. Flashed 10.0.7.GM57BA
2.8. Flashed magisk 20.4
2.9. Only then I rebooted to TWRP (I think it was mistake).
2.10. Then I saw first problem - there was no lockscreen security with TWRP (unlock pattern).
2.11. Restarted to TWRP again - the same no unlock pattern screen, no access to data partition
2.12. I started to panic and restarted into system.
2.13. I ended with hard bootloop - I mean I can't even do force reset (force reboot) by pressing and holding the Power and Volume down buttons at the same time :crying:
I'm sorry for this long description but I thought it will be helpful to diagnose what I messed up.
Questions and my thoughts:
1. Did I messed up by not restarting after last magisk flash?
2. What to do now? Do I need to wait for battery discharge? Then unbrick using MSM tool?
3. Is there any chance to repair and preserve personal data? I have TWRP backup about 3 months old. Maybe after battery discharge I should go to TWRP and then sideload this backup? Maybe magisk uninstall or stock boot image flash?
Please help
Update:
After battery discharge I managed to boot into TWRP recovery (Mauronofrio's 3.4.0.0)
Then couldn't access /data
But when I switched to Slot B and reboot to recovery situation is back to normal (I guess).
I'm still in recovery scared to boot into system.
What to do now?
Click to expand...
Click to collapse
To force restart I need to use power button and both volume keys..
To keep TWRP you need to flash rom, then without restart flash TWRP again, then restart TWRP, then flash Magisk.
Likely the r reason why your system doesn't boot is because it can't decrypt your data.
Why this happens I don't know, maybe in the upgrade they changed something related to the exception and then by downgrading again it isn't able to read it anymore.
I would suggest to:
Flash the latest rom.
Flash TWRP
Reboot TWRP
If TWRP then doesn't ask for PIN or password, then I'm afraid you have lost your data. I hope you have a backup.
I'm that case format (not just clear) data -> yes
Reboot TWRP
Then flash Magisk.
Thanks for reply.
Like I wrote in update after changing slot to b I managed to run TWRP with decrypted data, made even new new backup.
I also restarted into system and it occurs I'm still 10.3.5 (India & Global) GM57AA, so everything I flashed in with build 10.0.7.GM57BA was unsuccessful.
I think I messed with changing inactive slot procedure. Noob mistake I need to read about it.
kold11 said:
Thanks for reply.
Like I wrote in update after changing slot to b I managed to run TWRP with decrypted data, made even new new backup.
I also restarted into system and it occurs I'm still 10.3.5 (India & Global) GM57AA, so everything I flashed in with build 10.0.7.GM57BA was unsuccessful.
I think I messed with changing inactive slot procedure. Noob mistake I need to read about it.
Click to expand...
Click to collapse
I would suggest do restore your device with msm unbrick tool.
1. From recovery, turn off (i noticed, that when tried to turn off from somewhere else, the device would auto reboot later in downlaod mode)
2. In windows, turn off the connection & open device manager: Get this driver http://download.windowsupdate.com/c..._fba473728483260906ba044af3c063e309e6259d.cab
3. Press volume/down + volume/up, after about 5s connect to pc
4. Your device should show up in device manager, open it and install the driver manuell from step 2 (keep device options open... if fail you need to uninstall the driver before trying again)
5. Now wait for about 40s, if your device stays in download mode, you can open & start the msm tool (leave the options in msm as they are)
6. It will take about 280s, then the device will reboot.... (its normal that it stays longer at the oneplus logo at first start)
MSM Thread: https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
I've also uploaded the 10.0.5OOS Unbrick tool on mega, because android file hosted downloads are so terrible: https://mega.nz/file/ArZFkYpS#Z_rOIwZeYN27IG6L8rOi-yfw8wXGiwvK-uWVDlsmvTI
My phone is stuck in boot loader mode. I tried to install a custom rom and flashed everything but i got an error while installing it and it came out of twrp recovery and noe it is stuck and is not switching on. Please help
https://forum.xda-developers.com/t/...4-0-58-international-oxygen-os-9-0-2.3903272/
Use that if your phone is international model if not look around for the t-mobile msm tool. More details, more help. What exactly did you flash, how did you flash it, what recovery did you use....
flash713 said:
https://forum.xda-developers.com/t/...4-0-58-international-oxygen-os-9-0-2.3903272/
Use that if your phone is international model if not look around for the t-mobile msm tool. More details, more help. What exactly did you flash, how did you flash it, what recovery did you use....
Click to expand...
Click to collapse
I was trying to install evolution x rom after wiping the data we should flash the os to install custom rom right so i flashed the os and while installing some error occured it came back to bootloadr mode and is stuck. I was using twrp recovery.I saw a youtube video and was doing everything
please tell me what to do
[GUIDE] Mega Unbrick Guide for A Hard Bricked OnePlus 6
Similar to the previous threads for OnePlus 5 or OnePlus 5T, here are the necessary packages to unbrick/revive a hard bricked OnePlus 6. Download: https://www.androidfilehost.com/?w=files&flid=271466 OnePlus 6_180513_氢OS线刷包.rar After using it...
forum.xda-developers.com
How to flash a rom on oneplus 6.
Boot twrp: fastboot boot twrpxxxxx.img
Fash firmware OOS 10.3.9 or whatever latest is for your device. Get from repo on guides section here or from oxygen updater app. Make sure it's for your device. Don't flash global OOS on tmobile model...After flashing OOS latest, flash EvoX rom, flash twrp installer zip, flash finalize zip, reboot recovery, flash magisk latest. I use canary, format data-swipe to confirm in twrp, reboot system.
That's how you flash a rom on oneplus 6. Finalize is a script that can be found with simple search here on xda that copies firmware to both slots so you don't have to reboot recovery and flash OOS again. I used a Oneplus 6t a year prior to what I use now Pixel4XL and I flashed everything known to mankind available for it just this way.
Boot twrp,
Flash OOS,
Flash EvoX,
Flash twrp installer zip,
Flash finalize zip,
Reboot recovery,
Flash magisk
Format data-swipe to confirm yes,
Reboot system.
Update magisk once booted via magisk manager app icon in app drawer.
You should be able to hold down power+volume up and get in to bootloader node again and do this. Just keep holding them down till you see the "start" screen and let go, boot twrp from fastboot...