[ROM] [AICP] [9.0] LENOVO K6 POWER [UNOFFICIAL] - Lenovo K6 / K6 Power / K6 Note ROMs, Kernels, Reco

[ROM] [AICP] [9.0] LENOVO K6 POWER [UNOFFICIAL] - Lenovo K6 / K6 Power / K6 Note ROMs, Kernels, Reco

Reserved

Good
Nice ROM, stable and fast. Thank you

What about karatep version?

Fabricio1372841 said:
Nice ROM, stable and fast. Thank you
Click to expand...
Click to collapse
How about daily usage? It seems it is like los and pe

will it work on k6 note?

I clean-flashed. However, bootup takes very long (not just the first boot, every single time). On startup, the bootanimation stops suddenly and then a blank screen follows. The bootanimation starts again after a minute and then it takes about 3 more minutes from there to the lockscreen. Anyone else seeing this?
Other than this, the ROM works fine.

zeta041 said:
I clean-flashed. However, bootup takes very long (not just the first boot, every single time). On startup, the bootanimation stops suddenly and then a blank screen follows. The bootanimation starts again after a minute and then it takes about 3 more minutes from there to the lockscreen. Anyone else seeing this?
Other than this, the ROM works fine.
Click to expand...
Click to collapse
Facing Same issue

support k53a48 ?

Related

[ROM][OFFICIAL][7.1.2] AICP 12.1 for santoni [OMS][NIGHTLY]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then evolved into a mature ROM with the BEST community you can find!!!
Until Lollipop, the Rom has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM when it comes to hardware, drivers and some features.
With the rebrand of CM to LineageOS (LAOS) we are now actually LAOS based with some tweaks from AOSP.
If there are any bugs, either we will sort them out or the LAOS team will if it concerns their code base. This rom isn't LAOS supported, so no need to report errors or bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough Overview)
In the beginning we would like to thank:
LineageOS & CM (R.I.P.) team
Maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@Drgravy
@Hashbang173
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 12.1
Download link: http://dwnld.aicp-rom.com/?device=santoni
Full Changelog link: http://dwnld.aicp-rom.com/
Google Apps:
Beans gapps
Or
Open GApps (ARM or ARM64 7.1 pico or nano, depending on your phone's architecture)
Things Working:
WiFi
RIL
Camera
FPS
Mtp
VoLTE
Recent Apps might be..
You tell...
FAQ:]
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look in the OP to see, if your device is build on a nightly or weekly schedule.
Q. Does this ROM support custom kernels?
A. No. You can still use them (as long as they are LOS based), but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Xposed is not yet available for nougat (officialy), however there are unofficial versions. You will need to use the version arm64/arm for SDK 25.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I dirty flash builds?
A. Wipe System, Cache and ART/Dalvik cache. Flash the ROM, your preferred root solution and reboot. Or you might just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. Boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot", then swipe to flash, then go back to the install screen and install your root method again if you don't want to loose root, and then reboot.
A2. LOS based kernels sometimes come as a flashable ZIP file too. You can flash them together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue, if you don't want to loose root. Now swipe to flash, clear Cache & ART/Dalvik cache and then reboot.
Using the ROM:
Q. How do I enable software buttons?
A. Settings -> Navigation -> Enable navigation bar. The bar can be configured separately in its settings.
Q I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A In TWRP, flash the substratum rescue zip in the substratum folder on the internal storage.
Q I keep losing root with Magisk, how do I fix it?
A Check this out, if that doesn't work for you ask for help in this thread, read or ask in the Magisk thread on XDA or just flash Magisk again!
Q I'm having issues with WhatsApp, how do I fix it?
A Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the root section in the AICP Extras menu.
The ROM should contain everything you need to enjoy Android Nougat. You don't need to install any Add-Ons, simply download the latest ROM, GApps, flash it and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing, and if possible avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash:(Again: Don't do it if you don't know it!)
1. Download the ROM and GApps and transfer them to your device
2. Boot to recovery (TWRP recommended)
3. Wipe system, Cache, data and ART/Dalvik cache
4. Flash ROM Zipfile
5. Flash/Install GApps (optional, needed for e.g. Google Playstore to work)
6. Flash/Install the root solution of choice (optional)
7. Reboot to system
The ROM has GApps persistance in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every OTA update (= ROM Update)!
Supported root solutions:Magisk v13.x
SuperSU - stable and beta available (Site by CCMT that took over the the marketing from chainfire)
SuperSU - direct download link for the latest SuperSU directly from the dev (chainfire)
Lineage SU-addon (check your needed version: 14.1 arm or arm64) -> the removal zip is available here too.
KERNEL:
The kernel in this ROM follows LAOS source with custom additions from AOSP.
PREREQUISITE FOR OTA:To be able to flash using the buildin OTA app that needs TWRP recovery installed to work.
You can still use LAOS recovery and OTA app, but you will need to download the zip file and flash it manually from within your recovery. Zip gets saved in the "AICP_ota" folder on your internal storage.
Please be sure that you are on the latest TWRP recovery.
If you want to contribute to the AICP or wanna see what is being worked on/merged, feel free to visit our Gerrit review system. (Link is at the bottom!!!)
Kernel source:
Santoni Kernel
ROM & Additional links:
Gerrit Code Review
Github
IceColdJelly AICP G+ community
Contributors
@wzedlare , @Nik001 , @abhirajsinghofficial for using their vendor/device source and for all who helped me to build this Rom.
ROM OS Version: 7.1.x Nougat
ROM Kernel: Linux 3.18.xx
ROM Firmware Required: Unlocked bootloader, MIUI 9
Version Information
Status: Stable
Creation date: 05-09-2017
Last Updated: Nightly
You want to see a normal night at the "DEV office", click here!!

bug
ir blaster not working

duplicate - https://forum.xda-developers.com/xiaomi-redmi-4x/development/rom-aicp-12-1-santoni-t3668750
thread closed

[ROM][7.1.2] AICP 12.1 [VoLTE][OMS/DUI]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then evolved into a mature ROM with the BEST community you can find!!!
Until Lollipop, the Rom has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM when it comes to hardware, drivers and some features.
With the rebrand of CM to LineageOS (LAOS) we are now actually LAOS based with some tweaks from AOSP.
If there are any bugs, either we will sort them out or the LAOS team will if it concerns their code base. This rom isn't LAOS supported, so no need to report errors or bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough Overview)
In the beginning we would like to thank:
LineageOS & CM (R.I.P.) team
Maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@Drgravy
@Hashbang173
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 12.1
Download link: https://drive.google.com/open?id=1xg-vGLkUEy6oPSczLxylY9DSLlz5WK45
Full Changelog link: http://dwnld.aicp-rom.com/
Google Apps:
Beans gapps
Or
Open GApps (ARM or ARM64 7.1 pico or nano, depending on your phone's architecture)
- Hotspot not working when enable mobile data (use Wifi Tether for Hotspot app)
FAQ:]
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look in the OP to see, if your device is build on a nightly or weekly schedule.
Q. Does this ROM support custom kernels?
A. No. You can still use them (as long as they are LOS based), but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. You will need to use the version arm64/arm for SDK 25.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I dirty flash builds?
A. Wipe System, Cache and ART/Dalvik cache. Flash the ROM, your preferred root solution and reboot. Or you might just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. Boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot", then swipe to flash, then go back to the install screen and install your root method again if you don't want to loose root, and then reboot.
A2. LOS based kernels sometimes come as a flashable ZIP file too. You can flash them together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue, if you don't want to loose root. Now swipe to flash, clear Cache & ART/Dalvik cache and then reboot.
Using the ROM:
Q. How do I enable software buttons?
A. Settings -> Navigation -> Enable navigation bar. The bar can be configured separately in its settings.
Q I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A In TWRP, flash the substratum rescue zip in the substratum folder on the internal storage.
Q I keep losing root with Magisk, how do I fix it?
A Check this out, if that doesn't work for you ask for help in this thread, read or ask in the Magisk thread on XDA or just flash Magisk again!
Q I'm having issues with WhatsApp, how do I fix it?
A Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the root section in the AICP Extras menu.
The ROM should contain everything you need to enjoy Android Nougat. You don't need to install any Add-Ons, simply download the latest ROM, GApps, flash it and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing, and if possible avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash:(Again: Don't do it if you don't know it!)
1. Download the ROM and GApps and transfer them to your device
2. Boot to recovery (TWRP recommended)
3. Wipe system, Cache, data and ART/Dalvik cache
4. Flash ROM Zipfile
5. Flash/Install GApps (optional, needed for e.g. Google Playstore to work)
6. Flash/Install the root solution of choice (optional)
7. Reboot to system
The ROM has GApps persistance in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every OTA update (= ROM Update)!
Supported root solutions:Magisk v13.x
SuperSU - stable and beta available (Site by CCMT that took over the the marketing from chainfire)
SuperSU - direct download link for the latest SuperSU directly from the dev (chainfire)
Lineage SU-addon (check your needed version: 14.1 arm or arm64) -> the removal zip is available here too.
KERNEL:
The kernel in this ROM follows LAOS source with custom additions from AOSP.
PREREQUISITE FOR OTA:To be able to flash using the buildin OTA app that needs TWRP recovery installed to work.
You can still use LAOS recovery and OTA app, but you will need to download the zip file and flash it manually from within your recovery. Zip gets saved in the "AICP_ota" folder on your internal storage.
Please be sure that you are on the latest TWRP recovery.
If you want to contribute to the AICP or wanna see what is being worked on/merged, feel free to visit our Gerrit review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/MacTavishOT/android_kernel_xiaomi_msm8937
ROM & Additional links:
Gerrit Code Review
Github
IceColdJelly AICP G+ community
Contributors
-muralidharan
ROM OS Version: 7.1.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Stable Release Date: 10-11-2017
Creation date: 10-11-2017
Last Updated: unofficial
You want to see a normal night at the "DEV office", click here!!

H,i VoLTE is not working for me. It was working on same AICP 12.1 built now it suddenly has stopped working.
AICP 12.1 NIGHTLY
Lenovo Z2 plus

Development [ROM] [WIP] [PORT] AICP 14.0 for Lenovo Phab Plus [PIE]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and we are now based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
If there are any bugs, either we will sort them out or the GZOSP team, if it concerns their code base. This ROM isn't GZOSP supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
Download link: https://www.androidfilehost.com/?w=files&flid=312921
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
(link the best one for your device, there are several variants out there right now, nano/micro GApps from opengapps.org is almost always a good choice though)
Same As LineageOS 16.0
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Xposed is not yet released for Pie, however you can try to use edxposed .
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Pie. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 17.2 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/sheikhshahnawaz41299/android_kernel_lenovo_pb1770m
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Contributors:
@shahnawaz_sheikh
ROM OS Version: 9.0.x Pie
Kernel: Linux 3.10.108
Version Information:
Status: UNOFFICIAL
Release Date: 05-27-2020
You want to see a "normal" night at the "DEV office", click here!!

Screenshots

Reserved #2

Reserved #3

does audio work and do videos play havoc os has no audio and videos dont play lineage os is boot loop

what gapps should i use?

gapps dont flash opengapps gives busybox error code 1 use twrp ( i am using twrp) and mindthegapps says could not mount /system

no audio! do you have a rom that has audio

AICP ROM [OFFICIAL] for whyred

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q with a base of AOSP repositories and some additions from LineageOS for device specific repositories.
If there are any bugs, either we will sort them out, if it concerns our code base. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
...
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 15.0
Download link: https://dwnld.aicp-rom.com/
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
(link the best one for your device, there are several variants out there right now, nano/micro GApps from opengapps.org is almost always a good choice though)
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Information about Xposed, EdXposed or Riru Core can be obtained from the XPosed General forums .
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behaviour on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Q. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work), GApps are already included for some a/b devices.
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.3 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
PXiaomi SDM660 common kernel
Device tree source:
Device Tree
Vendor source:
Vendor Tree
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Contributors:
https://www.github.com/xiaomi-sdm660
You want to see a "normal" night at the "DEV office", click here!!
XDA:DevDB Information
AICP ROM, ROM for the Xiaomi Redmi Note 5 Pro
Contributors
Ayan Uchiha Choudhury
Source Code: https://github.com/AICP
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: iOS
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 15.0
Stable Release Date: 2020-08-18
Created 2020-08-20
Last Updated 2020-08-21

Reserved
CHANGELOG
aicp_whyred_q-15.0-WEEKLY-20200820.zip
Initial Build
Aug Sep
Detailed Changelog over here

Reserved

First build of AICP is out. Updates will be done every Thursday please keep a note

Very nice ROM. Everything seems smooth and I like the inclusion of xiaomi parts especially for microphone and headphone gain. Time will tell for battery performance. Nice job and I very much appreciate your efforts.

Could you add a feature to hide IME bottom space?

Stable rom, looking out due battery performance.

New Update was out yesterday. People already on the rom should get the update by now.

[ROM][UNOFFICIAL][10.0] AICP [oneplus3/3T][08/27/2020]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q with a base of AOSP repositories and some additions from LineageOS for device specific repositories.
If there are any bugs, either we will sort them out, if it concerns our code base. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
...
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 15.0
Download link: https://sourceforge.net/projects/aj...plus3_q-15.0-UNOFFICIAL-20200824.zip/download
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
(link the best one for your device, there are several variants out there right now, nano/micro GApps from opengapps.org is almost always a good choice though)
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Information about Xposed, EdXposed or Riru Core can be obtained from the XPosed General forums .
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behaviour on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Q. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work), GApps are already included for some a/b devices.
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.3 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/Gaurav241/kernel_oneplus_msm8996
Device tree source:
https://github.com/PixelExperience-Devices/device_oneplus_oneplus3
Vendor source:
https://github.com/Gaurav241/vendor_oneplus
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Contributors:
@Gaurav24 - A big thanks to him for his DT,Vendor and Kernel
You want to see a "normal" night at the "DEV office", click here!!
XDA:DevDB Information
[ROM][UNOFFICIAL][10.0] AICP [oneplus3/3T][08/27/2020], ROM for the OnePlus 3
Contributors
ajithzres, Gaurav24
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: 9.0.6
Based On: Lineage OS
Version Information
Status: Stable
Current Stable Version: 15
Stable Release Date: 2020-08-28
Created 2020-08-28
Last Updated 2020-08-28

Nice...

AICP FTW!
Glad to see AICP back and alive for this device! :good:
Heavy testing right now.
What is still missing (or I just can't find it) are possibilities of wave detection when the device is in sleep mode. Other ROMs offer three settings here, wave; remove from pocket; etc. So you can see immediately when you take out the device of your pocket, if and what mails you received, what time it is, etc.
I also got some benchmarking figures which I would like to share:
AnTuTu: 173,201 (not so good)
Geekbench 5, single-core: 343 (pretty good! the highest I did ever achieve for this device!)
Geekbench 5, multi-core: 827 (pretty good! second highest I could ever achieve for this device!)
Geekbench 5, Compute (OpenCL): 1614 (pretty good! also second highest I could ever achieve for this device!)
Thanks again and keep on rockin'! :highfive:

Database Info

welcome