Related
How to change Nvidia Shield Tablet K1 Resolution from 1920x1200 to 1920x1080?
Basically they have this feature built in if you connect the HDMI cable to the tablet... then the tablet reboot in 1920x1080 and displays only on the HDMI screen (the tablet screen is off)
When you disconnect the HDMI cable it drops a notification every 1-2 minutes do you want to reboot back to normal 1920x1200 resolution and it keep asking till you agree and reboot.
My question is how i can turn it to 1920x1080 or just how to disable the notification that pop up over the screen?
I prefer not to root the device if its possible.
Nvidia Shield Tablet K1 working on Android 6
Thanks.
Hi, came across your question wile looking for a solution as well. I do have a work around for the constant ask for revert from console mode. But not sure if it works on Android 6. I'm on 5.1 still. Hate 6. I do the Console mode remove HDMI thing. Then I go on a rampage force stoping EVERYTHING I find running. I go to Settings/App/Running and force stop everything. Then the Show cached processes, also stop everything. (and I mean Everything I see, including all those google thing I dont need running at the time, tho most will turn themselves on again) Then to the 'All' apps tab and look for everything Nvidia/Shield related and force stop it. And it works. The nagging stop. I haven't figured out what is it that stop the message as I did this once on a rage for that stupid message and since it worked I do it like that every time. And I've play for well over 2+ hours without the message popping up
Oh, also, I don't have a controller but I have All-In-One Toolbox, that I also run to close everything after all the force stops. Just in case. Well with that app you can have a toolbar on the notification and add a 'Recent app' there. Which you can not only use to switch but if you tap it and then tap somewhere NOT on other apps you get send to Home screen. (Wish the add Home/Back as well)
I know it seems like a hassle. I only do this when I want to record something on Ultra and get 1920x1080 instead of that horrid 1728x1080.
OH! And the touch accuracy gets worst the closer you get to the upper/lower borders (on landscape) due to touch screen reading the 1200 pixels on a 1080 shrunk image. Takes some getting used too, but worthy to capture on an OCD friendly video resolution.
I'm on Stock 5.1.1, not root.
Gonna look for a ROM that can do 1080p and also keep the Navbar. And maybe even add 1 tap Screenshot/record shortcuts for the navbar. Old cheap tablet used to have that screenshot button on the nav bar. Which was awesome for quick snap at those special gaming moments.
Anyways, since you have 6, try going Settings/Apps/All and force stop everything Nvidia/Shield related. And let me know how it works. Running apps 5.1.1 management is one of the things that keep me on in. And how micro SD works.
Hope it helps.
@FreelancerGamer
Resoluition:
Root, terminal emulator, commands(enter):
su
wm - displays options
wm size - displays current res.
wm size 1080x1920 - it will change yours res. Restart.
All this things you can do with adb, without root.
Notifications&popup - go to - settings - sound & notify - applications - disable what you want.
Omizuke said:
Hi, came across your question wile looking for a solution as well. I do have a work around for the constant ask for revert from console mode. But not sure if it works on Android 6. I'm on 5.1 still. Hate 6. I do the Console mode remove HDMI thing. Then I go on a rampage force stoping EVERYTHING I find running. I go to Settings/App/Running and force stop everything. Then the Show cached processes, also stop everything. (and I mean Everything I see, including all those google thing I dont need running at the time, tho most will turn themselves on again) Then to the 'All' apps tab and look for everything Nvidia/Shield related and force stop it. And it works. The nagging stop. I haven't figured out what is it that stop the message as I did this once on a rage for that stupid message and since it worked I do it like that every time. And I've play for well over 2+ hours without the message popping up
Oh, also, I don't have a controller but I have All-In-One Toolbox, that I also run to close everything after all the force stops. Just in case. Well with that app you can have a toolbar on the notification and add a 'Recent app' there. Which you can not only use to switch but if you tap it and then tap somewhere NOT on other apps you get send to Home screen. (Wish the add Home/Back as well)
I know it seems like a hassle. I only do this when I want to record something on Ultra and get 1920x1080 instead of that horrid 1728x1080.
OH! And the touch accuracy gets worst the closer you get to the upper/lower borders (on landscape) due to touch screen reading the 1200 pixels on a 1080 shrunk image. Takes some getting used too, but worthy to capture on an OCD friendly video resolution.
I'm on Stock 5.1.1, not root.
Gonna look for a ROM that can do 1080p and also keep the Navbar. And maybe even add 1 tap Screenshot/record shortcuts for the navbar. Old cheap tablet used to have that screenshot button on the nav bar. Which was awesome for quick snap at those special gaming moments.
Anyways, since you have 6, try going Settings/Apps/All and force stop everything Nvidia/Shield related. And let me know how it works. Running apps 5.1.1 management is one of the things that keep me on in. And how micro SD works.
Hope it helps.
Click to expand...
Click to collapse
Hi,
Thank you for your reply.
I tried to force stop but it still pop up the notification to restore to 1920x1200.
About the Android 6, I love it Because of the SD format that turns your SD to be a part of your device storage.
I have a controller so i can navigate even without the nav bars
If i will find something i will update here.
dzidexx said:
@FreelancerGamer
Resoluition:
Root, terminal emulator, commands(enter):
su
wm - displays options
wm size - displays current res.
wm size 1080x1920 - it will change yours res. Restart.
All this things you can do with adb, without root.
Notifications&popup - go to - settings - sound & notify - applications - disable what you want.
Click to expand...
Click to collapse
Sorry for my noob question but can you please explain in more details how i can do this?
More? It's joke? There is no details.
https://youtu.be/84srsYuvKUo
dzidexx said:
@FreelancerGamer
Resoluition:
Root, terminal emulator, commands(enter):
su
wm - displays options
wm size - displays current res.
wm size 1080x1920 - it will change yours res. Restart.
All this things you can do with adb, without root.
Notifications&popup - go to - settings - sound & notify - applications - disable what you want.
Click to expand...
Click to collapse
Thanks for this post, it was answer to what I wanted to do with my tablet - getting full screen for HDMI output without console mode, which frankly would be actually worse even if it did't puck up with my Dualshock 3 (console mode for some reason closes/disables the DualShock 3 connection with the sixaxis app from Play Store) - when using Mirror mode I can use my Dualshock 3 fine and using terminal before starting to play makes the screen look glorious, especially with games like sonic 2 android or Final Fantasy IX android.
Hi,
Does anyone know how to disable the new fingerprint unlock animation on the Mi Mix 2S?
It seems to be a system launcher update, the changelog says: "Fingerprint unlock works with an animated effect now!" The exclamation mark seems to indicate they find this excting, but I do not. Whereas it felt crisp and fast to unlock, there's now a perceptible wait as the bloated icons sluggishly come into view after unlock.
I have tried disabling animation effects in Developer options (I had most turned off anyway) but can't seem to find a way to stop this.
Thanks for any help.
it might be built in into the launcher? If you use the app drawer, you can give a try to the Poco Launcher, it is well integrated with miui
The subject should be disabled, not developed. Brain not in gear!
I did use Poco for ages, then went back to stock once it offered grids of 5 icons.
Perhaps I am heading back to Poco... I can find no option in the launcher itself.
Android 10
Release date: Tuesday, May 26th, 2020
Build Version: QKQ1.191002.002.V11.0.5.0.QDLMIXM
Kernel Version: 3.18.124-perf-g6d04eb4a
#1 Mon May 18 22:15:26 WIB 2020
Bootloader Version: MSM8953_DAISY2.0_20200518220803
Baseband Version: 953_GEN_PACK-1.202044.1.240106.1,953_GEN_PACK-1.202044.1.240106.1
Android Security Patch Version: May 2020
Please report bugs via Xiaomi's Feedback app.
How to Generate Bug Reports
Bugs:
1- [email protected] fps Video Recorder doesnt work on OmniVision OV12A10 Camera sensor. (Tap here for more info)
2- Still no way to discard Setting app suggestions.
3- Screen Lock/Unlock sounds doesnt work. (Factory reset fixes it)
4- Sim settings does not respect system theme. (only white) Source
5- Old charging sound still persist. (Factory reset fixes it)
6- Customize your Pixel still there. (Factory reset removes it)
7- Wifi icon on the statusbar is flickering. (Still same after factory reset)
8- Sometimes Wifi and Cellular icons on the statusbar is turning black while others white.
9- Direct share is broken. Source (Same after factory reset)
10- Some options in the Network settings are not translated correctly. Source
11- Volte still does not work (despite activation in options, the phone during the call switches to 3G network and does not display the volte icon) Source
12- 4G speeds slightly slower then Android 9 Source
Missing features:
1- There is no Equalizer.
Enhancements:
1- Second Stable Android 10 release.
2- It comes with May 2020 Android Security patch.
3- Sim card disabling option is fixed. Source
4- Camera sound deactivation works now. Source
5- Fixed! Uninstalling an huge app&game freezes the whole phone for a while. Source - Still same
Battery Life:
- One Sim,
- 2G only,
- Mobile Data off,
- Wifi,
- Brightness Auto,
- Battery Saver enabled at %10
- Adaptive Battery disabled
It gived 12 hours SOT. Check the SS's. Pretty much same as v11.0.4
Notes:
This is the second stable Android 10 update for Xiaomi Mi A2 Lite. There was a March 2020 Security patch in the first stable Android 10 update. Arrived 42 days later after v11.0.4
3DMark Test Results: (v2.0.4661)
Slingshot Extreme OpenGL ES 3.1 - Overall score 465
Slingshot Extreme Vulkan - Overall score 516
It will be beneficial to restart your phone after the first installation.
If you want to improve the performance of your phone tap here.
I will constantly update this topic.
perfect_ said:
Android 10
Release date: Tuesday, May 26th, 2020
Build Version: QKQ1.191002.002.V11.0.5.0.QDLMIXM
Kernel Version: 3.18.124-perf-g6d04eb4a
#1 Mon May 18 22:15:26 WIB 2020
Bootloader Version: MSM8953_DAISY2.0_20200518220803
Baseband Version: 953_GEN_PACK-1.202044.1.240106.1,953_GEN_PACK-1.202044.1.240106.1
Android Security Patch Version: May 2020
Please report bugs via Xiaomi's Feedback app.
How to Generate Bug Reports
Bugs:
1- [email protected] fps Video Recorder doesnt work on OmniVision OV12A10 Camera sensor.
2- Still no way to discard Setting app suggestions.
Missing features:
1- There is no Equalizer.
Enhancements:
1- Second Stable Android 10 release.
2- It comes with May 2020 Android Security patch.
3- Sim card disabling option is fixed. Source
4- Camera sound deactivation works now. Source
Battery Life:
N/A
Notes:
This is the second stable Android 10 update for Xiaomi Mi A2 Lite. There was a March 2020 Security patch in the first stable Android 10 update. Arrived 42 days later after v11.0.4
It will be beneficial to restart your phone after the first installation.
I will constantly update this topic.
Click to expand...
Click to collapse
Is third party launcher supported now?
Using gesture screen options.
gusbalaa said:
Is third party launcher supported now?
Using gesture screen options.
Click to expand...
Click to collapse
No.
-Facebook applications can't record video (Video capture fail error)
-------Found problem--------
The only system wide equalizer system that still works (the one explained here) on our device is causing the problem related to recording video in Facebook/Facebook Messenger/Instagram. Force closing the app now enables the video recording and as soon as the app is restarted the problem occurs again. And that's weird because the DSP isn't supposed to mess up the microphone or whatever facebook finds faulty and cancels the recording... Weird... Will look this up and update if solution is found.
Going back to the PRO version of that app now totally ignores the volume control of the device, which means in this .5 built the audio paths were modified. With pro version video recording is still failing. This is not a fix from xiaomi, this is an internal workaround, which is bad!!!
Even clearing the system, problem still persists. Checked permissions, checked storage writing, all is working, except video recording.
--------End of edit--------
-Sim settings does not respect system theme (only white)
--------Lazy modding from Xiaomi, this is the same dual sim controller app you had in Android Pie, just thrown in the Q environment--------
-Refreshing external device problem still persistent, new data copied on to the device only visible after reboot.
--------Not the only one with this problem, this is basically related to having huge folders on your SD card. I have a folder with >15k files in it)--------
-Sometimes some large games force close, but are fine after restarting the app (only sometimes - Only applicable on Gameloft ones - Totally unimportant)
What was fixed:
-Video record sound can now work with Google Voice turned on
-Ram management works fine for me (4/64)
??? Questionable effects:
-Lock screen sounds work for me (testing after a reset, still working just fine)
-Charging/USB sounds seems too low for me (problem persists, the vibration of the device is actually covering the sound)
Other than this, everything else remained the same as per what I wrote in my previous replies.
Qualcomm's app for data collection is still there, so this may be another partial release. They fixed something but the broke something else in another place.
Another lazy update, the battery is draining much faster than on .4 version, waiting for calibration. I'm starting to get sick over their incompetence to test and deliver a good end user experience.
OTA Link: https://bigota.d.miui.com/V11.0.5.0.QDLMIXM/miui_DAISYGlobal_V11.0.5.0.QDLMIXM_4e152f6600_10.0.zip
Let's not conclude quickly that the memory leak has benn fixed. I am trying to trigger it.
edit:
The device did not wake up from sleep, I got a random reboot.
magisk works as it should.
I install the update OTA this morning from official pie, the phone work well, the phone signal is a bit weak but all works well. No gesture in smart Launcher 5, i have fluid gesture for this feature.
Inviato dal mio Mi A2 Lite utilizzando Tapatalk
TeoXSD said:
-Facebook applications can't record video (Video capture fail error)
-Sim settings does not respect system theme (only white)
-Refreshing external device problem still persistent, new data copied on to the device only visible after reboot.
Click to expand...
Click to collapse
- Facebook and Messenger works fine with Camera.
- Sim settings same (only white)
- I am using Cx File manager works fine
Screen Lock/Unlock sounds work fine for me!
key-ancel said:
Screen Lock/Unlock sounds work fine for me!
Click to expand...
Click to collapse
Mine doesnt work.
perfect_ said:
Mine doesnt work.
Click to expand...
Click to collapse
Mine doesn't work too.
It began after upgrading to Q.
Also did two reset through settings, but nothing changed, still missing.
Have you maybe tried to flash fastboot image ?
srepole said:
Mine doesn't work too.
It began after upgrading to Q.
Also did two reset through settings, but nothing changed, still missing.
Have you maybe tried to flash fastboot image ?
Click to expand...
Click to collapse
I upgraded through ota from 10.0.18 to 11.0.4 and then i did Factory reset;
- New Charging sound was gone
- Lockscreen sounds doesnt work neither v11.0.4 nor v11.0.5
Anyone else getting super slow charging with this update? This is my first attempt to upgrade from Pie, and I've gone from 23% to 25% in almost an hour on standby...
- Direct share is still not available.
Please what do i do?
My phone is stuck with boot loop after upgrade to android 10.
how can i downgrade?
hi all!
face unlock function is gone completely, but after poking around I found that is the 'feature' and requirement of android 10 due to google's security concerns. ok...
but the problem I am facing is of a different nature. After update, I did factory reset but did not remove fingerprints prior to that operation. Now fingerprint enrolment fails every time I attempt to add another fingerprint. I was doing some digging around before posting this, and I already did try some of the solutions suggested for some other models which I have found scattered across XDA / so I already did boot twrp and erased via twrp file manager some of the files in /persist/data but that did not help.
any suggestions that could help, please?! thank you!
also, did anyone find a way to get rid of CUSTOMIZE PIXEL message?
Matty Watty said:
also, did anyone find a way to get rid of CUSTOMIZE PIXEL message?
Click to expand...
Click to collapse
Yes: -
1. Sell Mi A2 Lite
2. Buy a Pixel
Seems bizarre that the Pixel would not force this message on you and the Android One phone would but at the point this phone is exactly that, just a bizarre curiosity. Bye bye Xiaomi.
Matty Watty said:
also, did anyone find a way to get rid of CUSTOMIZE PIXEL message?
Click to expand...
Click to collapse
You've got to hand-exit the XML file in the settings suggestion data folder. You'll need root. Or you could boot (not install) TWRP and edit from there.
If your bootloader is locked, there doesn't seem to be any way to stop it. You can clear data on settings suggestions but the suggestions will come back and can't be dismissed.
a1291762 said:
You've got to hand-exit the XML file in the settings suggestion data folder. You'll need root. Or you could boot (not install) TWRP and edit from there.
If your bootloader is locked, there doesn't seem to be any way to stop it. You can clear data on settings suggestions but the suggestions will come back and can't be dismissed.
Click to expand...
Click to collapse
thanks. my boot loader is unlocked so I can boot easily into twrp. But I am not sure what do you mean with hand-exit and which exactly folder that xml file is in? thanks again.
Matty Watty said:
thanks. my boot loader is unlocked so I can boot easily into twrp. But I am not sure what do you mean with hand-exit and which exactly folder that xml file is in? thanks again.
Click to expand...
Click to collapse
From here...
https://support.google.com/android/thread/24667791?hl=en
This happened to me after upgrading a Xiaomi Mi A2 to Android 10 from Android 9.
Might be related to the "/data/data/com.android.settings.intelligence/shared_prefs/suggestions.xml" file not updating some values properly, since some users with rooted systems have changed manually this values to "true":
<boolean name="com.google.android.gm/com.google.android.gm.setup.AccountSetupFinalGmailSuggestions_is_dismissed" value="true" />
<boolean name="com.android.settings/com.android.settings.notification.ZenSuggestionActivity_is_dismissed" value="true" />
And the suggestions don't appear to them anymore.
I had to do this a few times, as new things popped up.
Tap, Tap is a port of the double tap on back of device gesture from Pixels running Android 12 to any Android 7.0+ device*.
Tap, Tap provides over 50 actions that can be run from double or triple taps on the back of your device, including:
Launching an app
Launching a shortcut
Toggling the flashlight
Simulating button presses, such as home or back
Running a Tasker task
Quick Tap to Snap**
... and many more!
The gesture can also be fully controlled, to only run under certain conditions, or run different actions in different scenarios; such as only when an app is running, the screen is off, or when listening to music (many more options are available).
The sensitivity and response of the gesture can be controlled, picking from 8 "models", trained for devices ranging in size from 5.7" to 6.3" in height, as well as finer control of the sensitivity of gesture detection, meaning there is a configuration that will work well for most devices.
Tap, Tap also tries to be easy on the battery, only running the gesture detection when required, and integrates with the "low power mode" available on select Pixel devices, otherwise using the lower-power machine learning capabilities of devices, where available.
* Your device must have an accelerometer and gyroscope.
** Requires a compatible Pixel device or root, see this page for more info.
Screenshots:
Example video, showing launching the camera on double tap
Changelog said:
Version 1.6.1
- Fixed crash on Android 14 Beta 3
- Updated dependencies
Version 1.6
- Added support for Android 14 DP1
- Fixed Low Power Mode on some Android 13/14 builds
- The "Apps" requirement now displays the selected app on the requirement list
- Removed checks from switches since it broke the animation
Version 1.5:
- Added new Samsung model from RegiStar
- Added new action to simulate rotating the device
- Added support for LG DualScreen devices for foldable gate
- Fixed a number of crashes
- UI tweaks
Version 1.4:
- Fixed Native Mode on Android 13, and as a result it now requires Shizuku or Sui. This is because of restrictions to the READ_LOGS permission on Android 13
- Added Notification Permission prompt for Android 13
- Updated Material switches to newer Material You style
- Updated dependencies
- Added touch on screen action, thanks mauri870
- Updated Traditional Chinese translation, thanks cracky5322
- Fixed incorrect button action during setup
- Fixed crash on Android 10
- Fixed incorrect notification for gesture actions
Version 1.3:
Introducing Native Mode, a new low-battery usage mode for Pixels with official Quick Tap support. This mode, similar to the existing low-power mode, uses the system component, but does so without needing root (on Android 13) or a constantly running Shizuku service (on Android 12). To set it up, you will need to use ADB or root once to grant a permission, after that it will run without further actions being required.
Please note that Native Mode does not work while the screen is off, and you may find triple tap is harder to use with it enabled. Both of these are system restrictions and cannot be worked around.
In addition, 1.3 fixes some crashes, updates translations, and fixes Quick Tap to Snap from the lockscreen.
Version 1.2:
Tap, Tap v1.2 disables the Tensor Low Power Mode by default as it was causing issues with some devices not working with the gesture.
If it was previously working for you on 1.x, and you experienced battery improvements, you can re-enable it in the advanced settings.
Low Power Mode on supported Pixels with Shizuku or Sui is not affected by this change.
- Added missing alarm permission
- Fixed more app shortcut crashes
- Improve foldable gates
- Added monochrome icon for Android 13
- Translation updates
Version 1.1:
- Fixes for Android 13
- Fixed app shortcut related crashes
- Fixed service starting on boot even if it's disabled
- Fixed crash on start on Android 7.0
- Added Do not Disturb enabling action, thanks Kylian Meulin
- Updated translations
Important: If you are on Android 13, you MUST now use Sui to use Low Power Mode (Sui requires root). This is due to platform restrictions, there is no workaround.
Version 1.0.1:
- Fixes for various crashes including Snapchat, App Shortcuts and network issues.
- Improvements to device specs lookup for model recommendation
- Improvements to notification & quick settings expand/collapse actions
- Actions & Gates that are unsupported will now give a reason why they are
- Added Battery Saver gate
Version 1.0 is a full rewrite of the app, from scratch. It contains a brand new UI, a number of new actions and gates, and implementation of the Android 12 'Columbus' gesture code and models, including a new Low Power Mode for Pixels.
You can read more here: https://medium.com/@KieronQuinn/tap-tap-v1-0-restarting-from-scratch-2b87c241d176
Click to expand...
Click to collapse
Download:
Version 1.6
GitHub:
https://github.com/KieronQuinn/TapTap
Reporting Issues & Feature Requests
If you have encountered a crash or error, please make an issue on the GitHub Issues page. For crashes, include a crash report, which Tap, Tap should create for you and show a notification after a hard crash (enable the option on the "More" page first if you have disabled it). Before making an issue, make sure it has not been reported before, and does not fall under the "service killed" pinned issue, as those will be closed and ignored.
To request a feature, either make an issue stating "Feature Request", or post a reply in the XDA thread. Note that only relatively simple features will be considered, anything more complex including toggling specific system features should be done using the Tasker capabilities of Tap, Tap, as the app is not meant to be a Tasker replacement.
I just installed it on my Pixel 4 XL and I'm really impressed by its accuracy. Also the UI looks very nice, good job!
I tried it on a Xiaomi mi8, works great
Wow, this works surprisingly well on OnePlus 7Pro, even with a case on. Although sometimes I'll go on a run of it working 10x times in a row, and then it won't work for the next few, and then go back to working again.
Currently using the Pixel 4XL model as I think it's the closest out of the three. It definitely needs more of a deliberate tap - tap instead of a super quick double tap to be more accurate, but that's not a problem at all.
Super excited to see what (if any) improvements can be made to the model, or sensitivity in the future.
Sent from my GM1917 using Tapatalk
Worked like a charm on the Mate 20 Pro using a Spigen case. This is awesome.
Tasker Integration
Can't wait to see the Tasker Integration to open up the whole new level of potential.
Thanks for the app!
mi_guel said:
I tried it on a Xiaomi mi8, works great
Click to expand...
Click to collapse
Same on Redmi Note 8 Pro
Works well on my xperia 1! Thanks
Id love for this to work when the phone is locked. Perhaps with root or magisk? Definitely willing to pay
Working Perfectly on Mi A2 Lite Major thanks to such an awesome Developer
Nice work, installed on my Galaxy Z FLip and it works great, can you add the ability to double tap and choose a shortcut too
THank you for the greatwork!
Trying it with my s10 exynos and it works great, little weird at times with a case but it still works 90% of the time
TrustAugustus said:
Works well on my xperia 1! Thanks
Id love for this to work when the phone is locked. Perhaps with root or magisk? Definitely willing to pay
Click to expand...
Click to collapse
Disable the screen off gate lol
And turn on the wake device up feedback if it's an app launching and not something that will work with the screen off
dallasnights said:
Nice work, installed on my Galaxy Z FLip and it works great, can you add the ability to double tap and choose a shortcut too
THank you for the greatwork!
Click to expand...
Click to collapse
Double tapping might not be possible, the tensorflow model appears to be for a single tap only, but I might be able to figure something out eventually.
Shortcuts as in like launcher shortcuts to call someone or open Maps directions? Probably will add that.
Tried on my Redmi Note 7 Pro using Havoc. The default command seemed to work but I changed it to back button simulation, and it doesn't work. My phone vibrates, telling me that Tap, Tap recognized my tapping but the command wasn't executed.
EDIT: lock screen works
Sent from my Redmi Note 7 Pro using XDA Labs
adriansticoid0312 said:
Tried on my Redmi Note 7 Pro using Havoc. The default command seemed to work but I changed it to back button simulation, and it doesn't work. My phone vibrates, telling me that Tap, Tap recognized my tapping but the command wasn't executed.
Click to expand...
Click to collapse
Do any of the other actions other than the default setup work? That would help rule out whether it's an issue with back or an issue with actions in general on that device
Quinny899 said:
Disable the screen off gate lol
And turn on the wake device up feedback if it's an app launching and not something that will work with the screen off
Click to expand...
Click to collapse
Sorry I was unclear. It is disabled. But from my experience in the past with apps such as button remapper I have been unable to get screen off commands to work properly. In that instance using volume buttons, it was possible. But not for dedicated camera keys etc.
Now, with the gate disabled, flashlight, Assistant do nothing when the screen is off. When it is on but in the lockscreen it still doesn't work. The phone is unlocked work trustedagent,too.
Works really nice on a Pixel 3. The app is really well made and I love the design.
Quinny899 said:
Do any of the other actions other than the default setup work? That would help rule out whether it's an issue with back or an issue with actions in general on that device
Click to expand...
Click to collapse
Lock screen and flashlight works.
Sent from my Redmi Note 7 Pro using XDA Labs
Tried with my OnePlus 7 Pro, works excellent so far!
Not working on Oppo Reno 10x Zoom
EDIT:
Works - I found the spot!
Works using PiXL 4 and Pixl 4 XL
As we all know, there is nothing in the stock ROMs for any of these Nubia RedMagic phones that makes desktop mode fully supported like many other manufacturers.
I'm sure most of us also realize too well that this is a niche handset and future support for getting a full featured desktop mode implemented by Nubia/ZTE is unlikely.
Before I give up on my original plan for this device, which was simply to use it as a portable/dockable gaming and emulation device, I figured I'd hop on here to see if anyone has any ideas.
Current status with NX709J_UNCommon_v3.12 - Official link
No official support for desktop mode
Kernel version shows 5.10.66-android12-9-00005-gf6e6376090be-ab8060604
Developer options has a few relevant desktop mode options that can be enabled:
Force activities to be resizeable
Enable freeform windows
Force desktop mode
Enable non-resizeable in multi window
With "Force desktop mode" enabled I get the following behavior:
Seems to be locked to a default of 1920x1080 resolution
No way to set anything through keyboard/mouse/other settings once in Desktop mode
No taskbar, just the usual 3 navigation buttons at the bottom of the screen
Apps that support window mode seem to properly resize and I can get some of them to go fullscreen but the window control buttons in the top right behave strangely
There is a persistant window full of your installed app shortcuts that stays up whether you try to close it out or not. Without "force activities to be resizeable" enabled, you can't resize it. With that enabled; If you do resize it, it's still locked to a vertical display aspect ratio.
Unplugging the phone from desktop mode leaves the home screen stuck in a static state. Widgets won't update, shortcuts won't open the app they are for, but oddly the manual fan controls for the integrated fan in the redmagic 7 pro will turn on if you have that widget on your home screen. I also routinely experienced the icon spacing and font size for everything getting all messed up. My only solution was to reboot the phone after disconnecting it from a dock/display when in forced desktop mode.
I attempted to use the following apps to see if they could make things any better:
Taskbar - Doesn't show up on external display. No improvements even with full access given to app via adb
Secondscreen - Doesn't allow me to change the resolution for the external display even with full access
Lawnchair 2 - Doesn't show up on external display or help in any way
Seems like someone had some luck with the RedMagic 5G/5S here: https://forum.xda-developers.com/t/cant-find-android-10-desktop-mode.4102431/#post-82678051
but that was 2 years ago and a different phone.. although I'm positive there are some vague similarities with the ROMs and how they are put together since they are talking about a stock Nubia/ZTE ROM.
If anyone has any ideas to contribute, whether for the RedMagic 6, 6S, 7, or 7 Pro please let us know what you've tried or had success with below