Hi RM3 fellas,
I have an issue with my RM3 surface, currently the phone is installed a hydrogel screen protector, I purchased two pieces of this hydrogel and now i am already using the second one (in one month)
I am a gamer, mostly pubg mobile, I would spend 3-4 hours daily to play this game and I notice that the oleophobic coating that comes with the screen protector will soon wear off after 5 days of gaming thus I replaced the first one and now I put on the second one. Previously I have already this kind of issue that I do not like while gaming which is the screen/touch area wont feel slick/smooth anymore that makes my finger kinda drag like a rubber and this is definitely not good while gaming pubg mobile because when controlling recoil, i mainly use my right thumb to drag down and not using gyroscope.
I hope y'all get my point now.
I have also purchased a nano liquid oleophobic coating from my local ecommerce store and tried to apply it onto the hydrogel screen protector but the result is still the same, the surface is not slick as it was first installed.
Does nano liquid on work on glass surface instead of hydrogel screen protector?
What kind of screen protector y'all use for gaming in my case pubg mobile requires extensive thumb contact with the surface all the time.
I have also tried using baby powder but it makes the hydrogel screen protector kind of messy with a lot of stain.
Walmart sells the kits to put it back on. The liquid screen protectors. I just order the stuff for coating cars off Amazon for ceramic coating and use that.
bignazpwns said:
Walmart sells the kits to put it back on. The liquid screen protectors. I just order the stuff for coating cars off Amazon for ceramic coating and use that.
Click to expand...
Click to collapse
Hello, so you apply the ceramic coating onto the glass screen directly or on top of the liquid screen protector?
I have purchased another screen protector, but not hydrogel anymore, it is from the same brand, called nanoglass protector instead of hydrogel protector, at first installed it doesnt feel slick at all then I played pubg mobile using finger sleeve and until now it is very smooth and slick, i guess the trick is using finger sleeve + nanoglass screen protector
I tried use finger sleeve + hydrogel but it does not feel as slick as nanoglass.
lius90 said:
Hello, so you apply the ceramic coating onto the glass screen directly or on top of the liquid screen protector?
I have purchased another screen protector, but not hydrogel anymore, it is from the same brand, called nanoglass protector instead of hydrogel protector, at first installed it doesnt feel slick at all then I played pubg mobile using finger sleeve and until now it is very smooth and slick, i guess the trick is using finger sleeve + nanoglass screen protector
I tried use finger sleeve + hydrogel but it does not feel as slick as nanoglass.
Click to expand...
Click to collapse
Screen protector. Just use something like this. Won't offer scratch protection but helps with the onlephobic coating
---------- Post added at 05:53 PM ---------- Previous post was at 05:52 PM ----------
lius90 said:
Hello, so you apply the ceramic coating onto the glass screen directly or on top of the liquid screen protector?
I have purchased another screen protector, but not hydrogel anymore, it is from the same brand, called nanoglass protector instead of hydrogel protector, at first installed it doesnt feel slick at all then I played pubg mobile using finger sleeve and until now it is very smooth and slick, i guess the trick is using finger sleeve + nanoglass screen protector
I tried use finger sleeve + hydrogel but it does not feel as slick as nanoglass.
Click to expand...
Click to collapse
Screen protector. Just use something like this. Won't offer scratch protection but helps with the onlephobic coating
https://www.amazon.com/Original-Protector-Resistant-Hardness-Smartphones/dp/B07JF9ZFQ2
Related
What Plastic Screen Protectors are you using on the Note 4? I'm under the notion that typical PET film is compatible with most cases.
I got the Zagg HDX screen protector and I'm pretty happy with it. I was hoping for tempered glass, but I don't think that's going to happen any time soon. The HDX protector was easy to install and it feels great. No issues with s-pen making divots or marks so far (been about a week of use).
INITIALLY... like immediately after you put it on, it feels a bit "sticky" when you run a finger over it. Just clean it off though and it's fine. Must be some residual "sticktion" from the films that cover the film prior to install.
+1 for the Zagg HDX. It's more expensive, but well worth it. The glass protectors look funky on this phone, and you can barely tell the Zagg is on there except for the somewhat sharp edge. I usually go without a protector, but the Note 4 is VERY scratchable... I had several light scratches in the coating that could only be seen in the right light only after a few days of use, so I had to get the protector.
I can rest-assure you its very hard not to get even the tiniest scratch on the shiny metal portions of the Note 4 especially the first time you put the phone in a case. When buying new, the device jostles while in transit, and I've seen scratches in areas where no one will see; that's just me.
Is the HDX as thin as one of those cheap plastic screen protectors found on eBay?
The HDX is a little thicker than the cheap ones. It's a multi-layer construction and provides impact resistance. It's still thin and flexible enough that it handles the slight curve at the edge of the screen and doesn't halo or anything. AND... I'm using the Samsung case and it works with that perfectly.
I'm currently using the iCarez film protector and it does not fit with my Seidio Surface case because it's too thick. Has a bubble in the lower left corner I can't get rid of and when I put the phone in my Akron Mega Grip car mount the side arms cause a large bubble on the left side. Not sure how thick it is but hoping for better results with the Zagg HDX which is 1 mm thick. Also don't like S Pen feel with the iCarez film.
I've been using Spigen Steinheil screen protectors since I first got a Motorola OG Driod. The Steinheil have always been durable and protective of my screens. I have a Spigen Steinheil Crystal screen protector on my Note 4. It works well and doesn't interfere with the native screen. They come 3 in a pack.
Zagg hdx until my iloome shows up
See here. Double thread?
http://forum.xda-developers.com/showthread.php?t=2987371
Thanks, moderators please close this thread or merge if applicable.
eksoccer99 said:
See here. Double thread?
http://forum.xda-developers.com/showthread.php?t=2987371
Click to expand...
Click to collapse
TechMatte screen protectors are the best quality, and best value!
http://www.amazon.com/gp/aw/d/B00MX...SY200_QL40&dpPl=1&dpID=510dhI4oDpL&ref=plSrch
Hi,
Just got a 8.4 Tab S and Samsung keyboard.
Please suggest a good screen protector (either plastic or tempered glass) that I can easily in Canada (either online or store).
I will also need a case that can fit the tablet/keyboard with a stylus holder.
Thanks in advance.
I have this glass screen protector. No complaints.
http://www.amazon.com/gp/product/B010BUKH1K
I am not sure about the case, I use the Samsung snap on flip cover and love it but it wouldn't accommodate your keyboard. As far as screen protectors go I have a Zagg and I love it, they have always been my favorite and if the protector ever gets damaged they replace it for you.
I'm using a tempered glass from Japan + flip plastic casing.
Dropped my tablet from knee height few weeks back and my screen didn't crack.
Previously I had other tablets without a tempered glass and the screen broke easily.
So a tempered glass is def a must-have for glass protection.
Happy with my Beetle case and Tempered glass protector on my Tab S 10.5..All from Amazon...and less than 30 bucks combined....
With the beetle case I removed the built in screen proctector due to the ugly rainbow effect...
Can't say enough good things about both of these items for the 8.4" Tab S
intelliARMOR tempered glass
Although you asked about one that also holds a keyboard, if you opt for one that is for the tablet only this is a great one. MoKo Samsung Galaxy Tab S 8.4 Case
I'd post links and did actually, but my post count is less than 10 so you'll have to do the leg work yourself on Amazon.
I went with the book cover hence no screen protector required
I bought the Beetle case myself yesterday, it has to ship all the way from the US to the UK, so it was not as cheap as yours, what tempered screen protector did you buy, though i am not the best as installing them.
John.
warriorking said:
Happy with my Beetle case and Tempered glass protector on my Tab S 10.5..All from Amazon...and less than 30 bucks combined....
With the beetle case I removed the built in screen proctector due to the ugly rainbow effect...
Click to expand...
Click to collapse
I purchased the Anoke brand from amazon..cost me 11 bucks..
No problem installing a tempered glass, it's real easy compared to a regular wet install non tempered one..
You just peel away the adhesive side and line it up carefully and lay it on the tablet, then just touch the center of the screen, it will do the rest, you then remove any excess aIr bubbles with the included cloth, no mess , no fuss...
Can the built in screen protector be removed without damage so it can be used with the case in the future?
I have an tempered screen protector, but it came with some of the adhesive around the edge damaged and i got a refund, but it looks like this case the bezel is covered so it might not be seen, so i might be able to use it.
Thanks
John.
warriorking said:
I purchased the Anoke brand from amazon..cost me 11 bucks..
No problem installing a tempered glass, it's real easy compared to a regular wet install non tempered one..
You just peel away the adhesive side and line it up carefully and lay it on the tablet, then just touch the center of the screen, it will do the rest, you then remove any excess aIr bubbles with the included cloth, no mess , no fuss...
Click to expand...
Click to collapse
Tinderbox (UK) said:
Can the built in screen protector be removed without damage so it can be used with the case in the future?
I have an tempered screen protector, but it came with some of the adhesive around the edge damaged and i got a refund, but it looks like this case the bezel is covered so it might not be seen, so i might be able to use it.
Thanks
John.
Click to expand...
Click to collapse
Yes, Just use a razor blade to loosen one end.
Its basically glued with a very light film, so it will peel off quite easily.....
But honestly when you see the ugly oily rainbow effect it has you will probably never want to put it back on...
I will see what it look like, and if it`s bad i will get an tempered glass screen protector, do you know what the weight of the beetle case, I cannot seem to find it, even on the supcase website or amazon, does it add a lot of weight? EDIT: Is is it 7oz approx 200g ???
Thanks
John.
warriorking said:
Yes, Just use a razor blade to loosen one end.
Its basically glued with a very light film, so it will peel off quite easily.....
But honestly when you see the ugly oily rainbow effect it has you will probably never want to put it back on...
Click to expand...
Click to collapse
It does add noticeable weight to the tabet but nothing that would cause any issues, for me I like the added weight, The Tablet s was so light I felt I was holding nothing and was afraid of dropping it everytime I picked it up.
Now I have something I feel comfortable caring around ..
I got my case yesterday, I cannot see any rainbow effect, did you remover the protective plastic from the inside of the screen before installing it.
Though the built in screen protector is an fingerprint magnet.
John.
warriorking said:
Happy with my Beetle case and Tempered glass protector on my Tab S 10.5..All from Amazon...and less than 30 bucks combined....
With the beetle case I removed the built in screen proctector due to the ugly rainbow effect...
Click to expand...
Click to collapse
Yes,
Glad yours is working out..
Only issue I have thus far with further use is there is no kickstand on the case, but I have a portable tablet stand arriving tomorrow which should fix that problem...
Will let you know how it works out...
Ok got my Tablet portable stand from Amazon today, very sturdy and works great, has lots of different angle settings to fit your needs.. http://www.amazon.com/gp/product/B000CKVOOY?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
It also will hold the tablet regardless of what case you use to house it..
As you can see I have the heavy duty Beetle case and it fits perfectly....
Stand opened and ready for use.
Tablet resting on the stand with front and back views.
On stand along with the Samsung Bluetooth keyboard...
If you want a stand that will fit in your bag or pocket for quick use this is the one you want.
Hey everyone
I have just bought a Samsung Note 9 and awaiting it to be delivered to me.
I always use tempered glass screen protectors but I am worried about using the S-pen with the protectors.
Does anyone know if you can use a tempered glass screen protector with the S-pen effectively.
[/COLOR]
Owenboy89 said:
Hey everyone
I have just bought a Samsung Note 9 and awaiting it to be delivered to me.
I always use tempered glass screen protectors but I am worried about using the S-pen with the protectors.
Does anyone know if you can use a tempered glass screen protector with the S-pen effectively.
Click to expand...
Click to collapse
I have the white stone dome protector and it works flawlessly with the S pen You don't even need to turn up the screen sensitivity
I wondered about liquid screen protection and I am watching one on EBay but I was wondering if normal versions work as well....i don't want to fork out all that extra if normal tempered glass works just as good as well.
I purchased the MP-MALL tempered protector and have not issues with the S-PEN. Looks good and hopefully will protect well. It is on amazon for about $12
Go with WhiteStone Dome they are tried and true. The best tempered glass I have ever used and it worked with the S-Pen and alot of cases I have tried.
Zagg one seems to work fine, imo it registers the pen better than finger keyboard stroke.
I bought a few different brands on Amazon. They all showed up in the same brown box with different labels printed out, they are fairly sharp at the top and bottoms. T-mobile has a glass cover that os actually tapered and smooth. They all work amazingly well with the pen. Although sensitivity does need to be turned up for finger use. I downloaded a multi Touch test app to confirm
Sent from my SM-N960U using Tapatalk
BigMosely said:
Go with WhiteStone Dome they are tried and true. The best tempered glass I have ever used and it worked with the S-Pen and alot of cases I have tried.
Click to expand...
Click to collapse
The only down side is that they are over priced and they do crack easily as reported by many.
The Mocolo is half the money and is made with 9H hardness which the White Stone isn’t. The Moloco is as good or better as the whitestone, as responsive and as easy to apply.
Tombias said:
The only down side is that they are over priced and they do crack easily as reported by many.
The Mocolo is half the money and is made with 9H hardness which the White Stone isn’t. The Moloco is as good or better as the whitestone, as responsive and as easy to apply.
Click to expand...
Click to collapse
I'm not worried about a $40 screen protector when I just paid $1,300 for the phone. I've had the screen protector on multiple phones now and I have not cracked or had any issues with any of them. Unless you're a complete klutz and you drop your phone multiple times a day you won't have any cracking issues.
i bought glass protector from aliexpress similar to whitestone dome but a lot cheaper one piece cost around 5$ only
'
first one was not perfect good thing i bought 2 extra
second piece i installed it and it fit perfectly on the screen only thing i installed a bit lower than it should be
so it almost touch the case from the lower side but there is a big gap on the upper side
i got a bubble on the lower side from testing several case because as i said it installed lower than it should be.
the spen and finger worked perfectly with it and alot better than the regular glass with matrix dots the stick from the sides only and i did not turn on screen sensitivity on both protectors
I had the ghetto whitestone setup on my Note 8 (LOCA glued a regular tempered glass screen) and now the whitestone on my Note 9. No issues at all and no changing of screen sensitivity.
Owenboy89 said:
I wondered about liquid screen protection and I am watching one on EBay but I was wondering if normal versions work as well....i don't want to fork out all that extra if normal tempered glass works just as good as well.
Click to expand...
Click to collapse
I await your future posts about glue making a mess and bubbled lifting corners. Just get a wet applied plastic film , not perfect but definitely less hassle and no issues with sensitivity, I don't even have that extra sensitivity option turned on my device.
Sent from my SM-N960U1 using Tapatalk
Ron36 said:
[/COLOR]
I have the white stone dome protector and it works flawlessly with the S pen You don't even need to turn up the screen sensitivity
Click to expand...
Click to collapse
This is my experience, as well.
They should work perfectly fine as S-Pen functions using electro-magnetism. Via the electro-magnetic Wacoom digitizer underneath the display.
Related review to this issue ...
https://forum.xda-developers.com/galaxy-note-9/accessories/active-stylus-screen-protector-t3866834
Hey everyone... Thought I would update you on on my Note 9 and screen protector issue... in the end I went with the Liquid screen Protector but I didn't get WhiteStone Glass.... I used a cheaper alternative and it works really well.... Also looks really vivid.
The Ebag seller who I got it from is called Itocorp but they seems to be out of stock at the moment.
I had a previous case with a screen protector built in for my S9+ and it worked great, but I'm having issues now. I found this one:
Case with Protector, but it says not compatible with fingerprint ID. I assume this is because of the fingerprint built into the screen?
Does anyone know of a case that has a screen protector AND works with the fingerprint reader? Or is the built in protector not possible due to the fingerprint reader in the screen now?
I would assume no built in screen protectors will work..in order for the FPS to work, the screen protector has to basically be attached to the screen with zero air gap between phone and protector..
jgruberman said:
I had a previous case with a screen protector built in for my S9+ and it worked great, but I'm having issues now. I found this one:
Case with Protector, but it says not compatible with fingerprint ID. I assume this is because of the fingerprint built into the screen?
Does anyone know of a case that has a screen protector AND works with the fingerprint reader? Or is the built in protector not possible due to the fingerprint reader in the screen now?
Click to expand...
Click to collapse
One of my friend used Gadgetshieldz case fit screen protector and he used many third party cases. Those fits are really great But I've ordered normal screen protector from them, waiting to order case fit once they released.
ArunRocker said:
One of my friend used Gadgetshieldz case fit screen protector and he used many third party cases. Those fits are really great But I've ordered normal screen protector from them, waiting to order case fit once they released.
Click to expand...
Click to collapse
and this was on the S10+?
For screen protector I would go with whitestone dome. For me it acts the same as if I had the preinstalled samsung film. I would then go on amazon and check out reviews and questions for whitestone dome. People tend to post their comparable cases. I am using the UAG Monarch and it fits without a problem.
I HIGHLY recommend the Whitestone protectors. The adhesive makes them SUBSTANTIALLY more chip/crack resistant and the touch sensitivity is light years ahead of other protectors (like ZAGG). It was my go-to on Note and now S10+.
I am a minimalist and finally found a case that's thin but also adds SOME protection. TORRAS on Amazon. The hard plastic has a matte finish, amazing touch and feel but little protection. The silicone option is thin, has ridges to protect camera and screen but slides in pants and pockets easily. It DOES offer drop protection relatively.
jgruberman said:
and this was on the S10+?
Click to expand...
Click to collapse
My Friend had an case fit screen protector applied on his S9+ from GadgetShieldz.
jstodda said:
I HIGHLY recommend the Whitestone protectors. The adhesive makes them SUBSTANTIALLY more chip/crack resistant and the touch sensitivity is light years ahead of other protectors (like ZAGG). It was my go-to on Note and now S10+.
I am a minimalist and finally found a case that's thin but also adds SOME protection. TORRAS on Amazon. The hard plastic has a matte finish, amazing touch and feel but little protection. The silicone option is thin, has ridges to protect camera and screen but slides in pants and pockets easily. It DOES offer drop protection relatively.
Click to expand...
Click to collapse
I actually just picked up the TORRAS Slim on Amazon, not sure if it's the same one you have. Currently I'm using the Spigen Rugged Armor... but it's too thin in my opinion. I feel like if I drop my phone, I have little protection. Spigen Rugged Armor Designed for Samsung Galaxy S10 Plus Case (2019) - Matte Black https://www.amazon.com/dp/B07MJQYDYB/ref=cm_sw_r_cp_apa_i_-cMICb49XRS4K
Fellow Members I will be reviewing loads of screen protectors, cases and accessories for the Huawei P30 Pro, I am open to questions and requests to help my fellow XDA members so please feel free to ask away.
Huawei P30 Pro Spigen Screen Protector Review
Need a screen Protector for your P30 Pro? Spigen Neo Flex for the Huawei P30 Pro:
Here is the link to the video: https://youtu.be/gHxA46EoALs
Please read this as it might answer your questions without having to watch the video above.
I am going to be installing the Spigen Neo Flex tpu screen protector on the Huawei P30 Pro. So what do you get inside the package? 2 screen protectors, the application fluid and yes this is a wet install, we also get a microfiber cloth, dust removal stickers and the squeegee. Now time to start the application, Firstly leave a spigen case on your p30 pro as it helps to align the screen protector, then using the microfiber cloth give the screen a good wipe. Once done and the screen is clean use the dust removal stickers to remove any residual dust or lint particles.
Now take the application fluid and spray it on your fingers and peel the backing off the screen protector and give the back of it a good spray as it makes it easier to line up the protector. Once aligned use the squeegee to make a vertical parting along the centre of the screen. Then using the squeegee gently remove the liquid from under the screen protector pushing it out from the centre of the screen to the edges, once this is done using the cloth gently push the edges down so they stick to the curved edges of the screen and then wipe any excess fluid from the screen protector and from around the p30 pro. There will be some bubbles left and a little fluid under the screen protector but trust me give the phone 6 to 24 hours and a perfectly applied bubble free screen protector.
Visibility is perfectly fine and there are some slight gaps around the screen protector making sure that it works with cases. The surface has a slight orange peel look to it but it is very smooth to the touch, The fingerprint sensor works perfectly as if the screen was bare, it does pick up some finger grease but no more than a glass protector and they wipe off with ease. I have tried this screen protector with all the official cases, spigen cases and Ringke cases and it works perfectly. The alignment is perfect and overall a highly recommended screen protector for your P30 Pro.
ramheer said:
Need a screen Protector for your P30 Pro? Spigen Neo Flex for the Huawei P30 Pro:
Here is the link to the video:
Please read this as it might answer your questions without having to watch the video above.
I am going to be installing the Spigen Neo Flex tpu screen protector on the Huawei P30 Pro. So what do you get inside the package? 2 screen protectors, the application fluid and yes this is a wet install, we also get a microfiber cloth, dust removal stickers and the squeegee. Now time to start the application, Firstly leave a spigen case on your p30 pro as it helps to align the screen protector, then using the microfiber cloth give the screen a good wipe. Once done and the screen is clean use the dust removal stickers to remove any residual dust or lint particles.
Now take the application fluid and spray it on your fingers and peel the backing off the screen protector and give the back of it a good spray as it makes it easier to line up the protector. Once aligned use the squeegee to make a vertical parting along the centre of the screen. Then using the squeegee gently remove the liquid from under the screen protector pushing it out from the centre of the screen to the edges, once this is done using the cloth gently push the edges down so they stick to the curved edges of the screen and then wipe any excess fluid from the screen protector and from around the p30 pro. There will be some bubbles left and a little fluid under the screen protector but trust me give the phone 6 to 24 hours and a perfectly applied bubble free screen protector.
Visibility is perfectly fine and there are some slight gaps around the screen protector making sure that it works with cases. The surface has a slight orange peel look to it but it is very smooth to the touch, The fingerprint sensor works perfectly as if the screen was bare, it does pick up some finger grease but no more than a glass protector and they wipe off with ease. I have tried this screen protector with all the official cases, spigen cases and Ringke cases and it works perfectly. The alignment is perfect and overall a highly recommended screen protector for your P30 Pro.
Click to expand...
Click to collapse
Thanks for the review! Useful indeed.
Have you had a chance to try any tempered glass screen protector on the P30 Pro?
hunhool said:
Thanks for the review! Useful indeed.
Have you had a chance to try any tempered glass screen protector on the P30 Pro?
Click to expand...
Click to collapse
I've been using this one and it's got a good overall coverage, only a small amount of rainbow effect and does the job of keeping the look and feel the same..
https://amzn.to/2WZjVAS
Best Huawei P30 Pro Full Adhesive Glass Screen Protector
The Best Huawei P30 Pro Full coverage, Full Adhesive Glass Screen Protector, Link to the Video: https://youtu.be/xnBzU40oVkw
Please read below before watching the video as it may answer your questions.
oday I am going to be installing a full adhesive glass screen protector on the Huawei P30 Pro made by a company called Anewsir. So what do you get inside the package? 2 glass screen protectors, the application glue, dry and wet wipes, a battery powered UV lamp and dust removal stickers. Now time to start the messy application, Firstly then using the alchol wipe give the screen a once over then using the dry wipe remove any excess fluid. Once done and the screen is clean use the dust removal stickers to remove any residual dust or lint particles.
Now take the bottle of glue and let it pour out slowly onto the centre of the screen giving it a minute or so to ensure the glue is fully expelled from the bottle. Some top tips before applying the glue make sure the surface your Huawei p30 pro is laying on is level and p lace a small cloth or tissue under it to absorb any glue that might seep out during the installation. Time to peel the backing off the glass screen protector and slowly line it up with the screen using the notch as a reference point and now lay it down gently and sit back allowing the glue to spread evenly to every edge and corner of the screen protector. Don’t move the P30 Pro or the screen protector at this point as it can cause bubbles to form. Time to cure the glue, switch on the UV lamp and move it slowly up and down the screen slowly for 3 minutes, wipe the phone down and done.
As you can see the visibility is great and there are some slight gaps around the screen protector including the notch, making sure that it works with every case I tried such as the official, spigen and Ringke cases. The surface has a smooth oleophobic coating on it making it a breeze to slide your finger around, The fingerprint sensor works just as well as if no screen protector is being used, it does pick up some finger grease but no more than any other glass protector and they wipe off easily. The alignment is perfect plus being glass it is more protective in a drop than the tpu style screen protectors, overall a highly recommended screen protector for your P30 Pro.
hunhool said:
Thanks for the review! Useful indeed.
Have you had a chance to try any tempered glass screen protector on the P30 Pro?
Click to expand...
Click to collapse
Yes I have just uploaded a video for a glass screen protector.
Love those icons in the video, would you mind letting me know what they are?
nibs777 said:
Love those icons in the video, would you mind letting me know what they are?
Click to expand...
Click to collapse
The theme is called black from the Huawei theme store
What kind of tempered glass do you guys advice? I've a full covered one with only glue on the edges. It feels like it's not fitting properly
I used the g colour glass protector. Works great.
Supreme_One said:
What kind of tempered glass do you guys advice? I've a full covered one with only glue on the edges. It feels like it's not fitting properly
Click to expand...
Click to collapse
Ordered and received this:
https://www.gsmpunt.nl/screen-protectors/panzerglass-huawei-p30-pro-case-friendly-screenprotector
So far so good. Nothing to complain.
Also, just ordered this case: https://www.amazon.de/dp/B07P7NTV5S/ref=cm_sw_r_cp_apa_i_an3TCb33ECDDQ
hunhool said:
Ordered and received this:
https://www.gsmpunt.nl/screen-protectors/panzerglass-huawei-p30-pro-case-friendly-screenprotector
So far so good. Nothing to complain.
Also, just ordered this case: https://www.amazon.de/dp/B07P7NTV5S/ref=cm_sw_r_cp_apa_i_an3TCb33ECDDQ
Click to expand...
Click to collapse
Hahah Nederlander
I try many tempered glass.Regular or glue+ UV ..Few days and all go to trash can.
Only correct solution me Clearplex (Media Markt hungary)
This stuff like hydrogel ol spiegen same stuff.
https://www.youtube.com/watch?v=vth0sv-7rLQ
Diggin' the Huawei Flip Cover Case
I have never been a fan of flip cover cases... but for the first time, I am really liking Huawei's flip cover case. Closes nice a tight... Looks good and is not at all bulky like other flip cases can be. The only time I can see me going back to my Huawei Silicon case is when I know I'm going to take a lot of pictures, like at a concert or something, to avoid having to keep flipping open and to have a slightly better grip on the phone. The only other weird issue I found is that I cannot use the flip cover close and hook up to Android Auto... Doing so creates a white bar at the top on my radio screen, don't know if this is due to my cars radio or it is something that follows the phone when using that case... maybe someone else can try it out, would be curious if they see the same thing... However, if I disconnect, open the cover and turn it behind the phone then hook up to Android Auto, everything is fine... Weird bug but easily overcome... :good:
Glass screen protectors are cool on curved screens, but for a few days/weeks. Then they start to wear off.. I'd want to hear after a while you've been using it, and especially with a case on the phone as well...
I think i am going to wait to see what noreve's case is going to be like, it shows at the moment as they are in the middle of making them, they are usually extremely good quality though
Supreme_One said:
Hahah Nederlander
Click to expand...
Click to collapse
And why is it so funny for you?
---------- Post added at 10:13 PM ---------- Previous post was at 10:11 PM ----------
Piero88 said:
Glass screen protectors are cool on curved screens, but for a few days/weeks. Then they start to wear off.. I'd want to hear after a while you've been using it, and especially with a case on the phone as well...
Click to expand...
Click to collapse
Check my post above. Tempered glass screen and case were arrived the same date. Installed both(glass is case friendly) so far soo good.
mahst68 said:
I have never been a fan of flip cover cases... but for the first time, I am really liking Huawei's flip cover case. Closes nice a tight... Looks good and is not at all bulky like other flip cases can be. The only time I can see me going back to my Huawei Silicon case is when I know I'm going to take a lot of pictures, like at a concert or something, to avoid having to keep flipping open and to have a slightly better grip on the phone. The only other weird issue I found is that I cannot use the flip cover close and hook up to Android Auto... Doing so creates a white bar at the top on my radio screen, don't know if this is due to my cars radio or it is something that follows the phone when using that case... maybe someone else can try it out, would be curious if they see the same thing... However, if I disconnect, open the cover and turn it behind the phone then hook up to Android Auto, everything is fine... Weird bug but easily overcome... :good:
Click to expand...
Click to collapse
Is this the smart view case?
If so can you let me know if it shows 3rd party notifications now?
rajziel said:
Is this the smart view case?
If so can you let me know if it shows 3rd party notifications now?
Click to expand...
Click to collapse
It is the smart view case... I have seen notifications on it but I only think it's for the baked in apps. I guess I haven't paid a lot of attention since it takes just as much time to just flip it open then look then worrying about the smart view screen. I also don't have it on wake for notifications which I think may play a part. Let me mess around with a few settings and see what I come up with :laugh:
mahst68 said:
It is the smart view case... I have seen notifications on it but I only think it's for the baked in apps. I guess I haven't paid a lot of attention since it takes just as much time to just flip it open then look then worrying about the smart view screen. I also don't have it on wake for notifications which I think may play a part. Let me mess around with a few settings and see what I come up with :laugh:
Click to expand...
Click to collapse
Cheers
I have an unofficial smart view case and that doesnt show whatsapp notifications.
its not a major issue but if the official one does show them I may have to get one.