hi dear friends
thanks for all who support members
I have mate 9 pro
LON-L29C185B180
when get stock recovery enter erecovery the I used dc phoneix to fix it by stock firmware cost 15€
after this my device fully unrooted frp lock stock recovery but bootloader relock how can I change it to lock please I need your support
.
i try to used dc-unlocker for this steps but the choice not available like thier description like com port and some drivers
see the post for steps
How to lock Huawei bootloader (from RELOCKED to LOCKED)
please help
thanks again to all
You could've done it for free. Anyway. Update using Firmware finder to B180 or use the flash update thread in guides, updating will lock bootloader.
dear ante0 thanks for replay, I will be fine if pay I used dc phoneix to right update.app but not lock. I found thread to flash firmware but only for chinese devices can you please help by llink for this guide?
You could've done it for free. Anyway. Update using Firmware finder to B180 or use the flash update thread in guides, updating will lock bootloader.
Click to expand...
Click to collapse
Dear ante0
thanks a lot
I used firmware finder and it was difficult to use in the beginning to setup settings. after that every things going smoothly. now the bootloader is locked
Dear ante0
thanks a lot
I used firmware finder and it was difficult to use in the beginning to setup settings. after that every things going smoothly. now the bootloader is locked.
after flash fully firmware bootloader become locked and device boot was very fast not like before
You can use Mate_8_rayglobe_knife for relocked to locke again.
Thanks my friend already done
Hello all.
I attempted to flash a ROM a while back and failed miserably. All I managed to do in the end was unlock the bootloader. I would like to change this, and set things back to they way they were; locked bootloader.
Is there anyway to achieve this? I would like to be able to use apps like Uber that won't work with an unlocked bootloader.
Any and all help is greatly appreciated.
cr33p3r1n1134 said:
Hello all.
I attempted to flash a ROM a while back and failed miserably. All I managed to do in the end was unlock the bootloader. I would like to change this, and set things back to they way they were; locked bootloader.
Is there anyway to achieve this? I would like to be able to use apps like Uber that won't work with an unlocked bootloader.
Any and all help is greatly appreciated.
Click to expand...
Click to collapse
Hello I think this could help you
https://youtu.be/8OywEYZ2cbw
This is a video about how to rebrand your mate 9
Now it in the steps it says that after you use the options 2 to rebrand it relock your bootloader, I don't know what mate you have but since you probably installed a custom recovery it is why you can't relock with the command, so my suggestion is this download the WHOTA update and also install the the software finder via Google Play. With it look for your specific model and copy the links to download the files for your specific model in your PC, Also do a Backup of your Oeminfo via the TWRP since it will be the only file you won't find, probably (if it happens to be the MHA-L09 C605 send it to me I need it for my phone I made the mistake of not backing up my Oeminfo).
If you download the files and follow the instructions of the video you will be able to relock your bootloader. But watch it 3 times and also download all the files and make sure to back up everything in your PC if something goes wrong.
Sent from my MHA-L09 using Tapatalk
just flash your oeminfo.bin file again and your bootloader will be locked.. make sure its for your model!
gremy1987 said:
Hello I think this could help you
https://youtu.be/8OywEYZ2cbw
This is a video about how to rebrand your mate 9
Now it in the steps it says that after you use the options 2 to rebrand it relock your bootloader, I don't know what mate you have but since you probably installed a custom recovery it is why you can't relock with the command, so my suggestion is this download the WHOTA update and also install the the software finder via Google Play. With it look for your specific model and copy the links to download the files for your specific model in your PC, Also do a Backup of your Oeminfo via the TWRP since it will be the only file you won't find, probably (if it happens to be the MHA-L09 C605 send it to me I need it for my phone I made the mistake of not backing up my Oeminfo).
If you download the files and follow the instructions of the video you will be able to relock your bootloader. But watch it 3 times and also download all the files and make sure to back up everything in your PC if something goes wrong.
Sent from my MHA-L09 using Tapatalk
Click to expand...
Click to collapse
redhotneo said:
just flash your oeminfo.bin file again and your bootloader will be locked.. make sure its for your model!
Click to expand...
Click to collapse
Thanks guys. I've found a fairly simple solution.
This is the solution that worked for me.
1. Type "fastboot oem relock (your phone's unlock code)" and select unlock or yes with volume buttons & power.
Hopefully this method will help others.
How we do now that there is no more huawei unlock website ? thank you
mrpurple66 said:
How we do now that there is no more huawei unlock website ? thank you
Click to expand...
Click to collapse
hi did you managed to find a way to "unlock" the bootloader w/o the codes?
Only possible with funky huawei an downgrade to android 7
Google for unlock funky huawei. But you have to pay money for this
Huawei stoped every possibilities so only with funky
virtuell_gitarrist said:
Only possible with funky huawei an downgrade to android 7
Google for unlock funky huawei. But you have to pay money for this
Huawei stoped every possibilities so only with funky
Click to expand...
Click to collapse
Hcu-client (A tool by DC unlocker) worked fine last I tested it, was on MHA-L29C432B373
Just flash ur oeminfo.bin file to re lock ur boot loader.. Its that easy. But u lose all ur files cos phone resets
i bought 8 credits and get origianl unlock code from huawei.
Then, i'm went to rebanded my phone by using P20 Single to Dual.exe
###The phone still have NO DUAL SIM after rebranded from CLT-L04 to CLT-L29.
After that, the bootloader is showing """"""Phone locked""""""
i tried use the origianl code from huawei--------------FAIL
FAILED (remote: check password failed!)
finished. total time: 4.516s
use gen code from machine-------------------FAIL
FAILED (remote: check password failed!)
finished. total time: 4.516s
use dc-unlocker...read code ----------------FAIL
Reading bootloader code...
unknown error (405)
how i can get my bootloader unlock again?
And fastboot oem get-psid IMEI ,IMEI1,MEID were changed!!!!
======================================================
NOW i'm warning anybody don't use funkyhuawei to rebrand your phone !!!
The result is same as using xda method , unless you don't need to PAY and locked your bootloader again.
https://forum.xda-developers.com/hu...de-how-to-root-debrand-remove-retail-t3788326
sorry mate.... but it clearly says it on their guide
"Note: Bootloader code will change after using single to dual tool"
step 4 on this page https://funkyhuawei.club/tools/rebrandp20
which i believe is the guide you followed for rebranding
kaiowas82 said:
sorry mate.... but it clearly says it on their guide
"Note: Bootloader code will change after using single to dual tool"
step 4 on this page https://funkyhuawei.club/tools/rebrandp20
which i believe is the guide you followed for rebranding
Click to expand...
Click to collapse
Yes, it said changed.
But not clearly say their is no method to get the unlock code agian or make it unlock again.
i would say Don't use Funky Huawei do rebrand job as well
So, is there a way which doesn't change the unlock code?
Already thinking getting the P20 was a total mistake.
I converted mine to dual and am only just finding out from this post I cant have it unlocked again. Are you saying huawei wont generate a new one for you?
maddoguk said:
So, is there a way which doesn't change the unlock code?
Already thinking getting the P20 was a total mistake.
Click to expand...
Click to collapse
Yes - https://forum.xda-developers.com/hu...de-how-to-root-debrand-remove-retail-t3788326
Unsturdy said:
I converted mine to dual and am only just finding out from this post I cant have it unlocked again. Are you saying huawei wont generate a new one for you?
Click to expand...
Click to collapse
USE XDA method----u can use the origial code unlock again/
use funky hauwei method----u have no ideas to unlock again in this moment.
i sent them 3 emails, they didnt answer this question, i think they know their method have problem of it.
About 1 mounth ago I transform my P20 Pro from single to dual sim with FunkyHuawei method. All gone well at first time ! And my phone handles and works with both sim, also in 4G!
They said me at once that after the procedure the bootloader will be blocked again and, for now, I can't unblock it with the old Huawei Key.
So no root and no TWRP.
They say me that in the future I'll can install Recovery and root the phone with a new tool, also with blocked bootloader .
Also I must say that FunkyHuawei method it's easier that do all by hand ! But, obviously, it costs a lot !
doromax said:
About 1 mounth ago I transform my P20 Pro from single to dual sim with FunkyHuawei method. All gone well at first time ! And my phone handles and works with both sim, also in 4G!
They said me at once that after the procedure the bootloader will be blocked again and, for now, I can't unblock it with the old Huawei Key.
So no root and no TWRP.
They say me that in the future I'll can install Recovery and root the phone with a new tool, also with blocked bootloader .
Also I must say that FunkyHuawei method it's easier that do all by hand ! But, obviously, it costs a lot !
Click to expand...
Click to collapse
Same. Ive asked huawei for a new key. Ill post with results
Unsturdy said:
Same. Ive asked huawei for a new key. Ill post with results
Click to expand...
Click to collapse
Can you say me the model and the firmware of your phone before and after rebrand ?
Before rebrand to dual sim your phone was C432 (international version) or what ?
Which version you use to rebrand? Always C432 (international version)?
This is important to know why some version have given problem to users .
doromax said:
Can you say me the model and the firmware of your phone before and after rebrand ?
Before rebrand to dual sim your phone was C432 (international version) or what ?
Which version you use to rebrand? Always C432 (international version)?
This is important to know why some version have given problem to users .
Click to expand...
Click to collapse
I was single sim uk version CLT-L09 C782 and i rebranded to dual CLT-L29 C782.
Hello, I just put a claim in Paypal (I encourage people to do so), based on the fact that they have not notified the terminal block, once the change from singel to dual sim and attaching the direct instructions for the use of his tool, in which he does not notice, in any case, of that circumstance.
My model was the L09 and now it's the L29 (in both the European c432 version).
My claim in Paypal is that, by not telling the buyer of the terminal block and it is impossible (according to them) to find the new code, any problem can no longer go through the Huawei Technical Service (SAT) but for them and charging one and again.
I wanted to ask you if you know if using the Huawei PC tool we would return it to the original state (with the original unlock code, which would be useful in this case), to me the Samsung utilities (kies) saved me more than once .
Thank you very much.
wan8_kln said:
i bought 8 credits and get origianl unlock code from huawei.
Then, i'm went to rebanded my phone by using P20 Single to Dual.exe
###The phone still have NO DUAL SIM after rebranded from CLT-L04 to CLT-L29.
After that, the bootloader is showing """"""Phone locked""""""
i tried use the origianl code from huawei--------------FAIL
FAILED (remote: check password failed!)
finished. total time: 4.516s
use gen code from machine-------------------FAIL
FAILED (remote: check password failed!)
finished. total time: 4.516s
use dc-unlocker...read code ----------------FAIL
Reading bootloader code...
unknown error (405)
how i can get my bootloader unlock again?
And fastboot oem get-psid IMEI ,IMEI1,MEID were changed!!!!
======================================================
NOW i'm warning anybody don't use funkyhuawei to rebrand your phone !!!
The result is same as using xda method , unless you don't need to PAY and locked your bootloader again.
https://forum.xda-developers.com/hu...de-how-to-root-debrand-remove-retail-t3788326
Click to expand...
Click to collapse
Unsturdy said:
I converted mine to dual and am only just finding out from this post I cant have it unlocked again. Are you saying huawei wont generate a new one for you?
Click to expand...
Click to collapse
wan8_kln said:
USE XDA method----u can use the origial code unlock again/
use funky hauwei method----u have no ideas to unlock again in this moment.
i sent them 3 emails, they didnt answer this question, i think they know their method have problem of it.
Click to expand...
Click to collapse
doromax said:
About 1 mounth ago I transform my P20 Pro from single to dual sim with FunkyHuawei method. All gone well at first time ! And my phone handles and works with both sim, also in 4G!
They said me at once that after the procedure the bootloader will be blocked again and, for now, I can't unblock it with the old Huawei Key.
So no root and no TWRP.
They say me that in the future I'll can install Recovery and root the phone with a new tool, also with blocked bootloader .
Also I must say that FunkyHuawei method it's easier that do all by hand ! But, obviously, it costs a lot !
Click to expand...
Click to collapse
Unsturdy said:
Same. Ive asked huawei for a new key. Ill post with results
Click to expand...
Click to collapse
Just got email back from huawei theyve given me the same code as before. I have responded by asking them to generate a new one.
To the post above, they do clearly state the bootloader code will change. And if you use the xda method apparently it can still be changed etc.
Hmmm
More on the bootloader code. The first time i rebranded i rebranded to CLTL29 but used the wrong tool and didnt use the actual dual converter.
When i used the dual converter having to use my bootloader code again, it did actually work.
Maybe it was luck i dont know but i still have 5 credits and would need 2 more to rebrand to c432 they ignored my email asking if they could credit me with 2 credits as I have already spent nearly £50 and the minimum I can buy is 5.
New email from huawei saying they have requested a new bootloader code for me. Fingers crossed.
The same happened to me: Huawei gave me the same code. Could you give me the Huawei contact email? Thank you very much. And good luck with the new code.
Unsturdy said:
New email from huawei saying they have requested a new bootloader code for me. Fingers crossed.
Click to expand...
Click to collapse
Grancapitan said:
The same happened to me: Huawei gave me the same code. Could you give me the Huawei contact email? Thank you very much. And good luck with the new code.
Click to expand...
Click to collapse
Huawei will always provide you with the same code, based on the original IMEI.
Try booting in fastboot and use this command : fastboot oem get-psid
If it works, it should return IMEI and Serial info, compare those with the ones from the retail box. ?
Thank you very much, I will compare it, although the IMEI does not change, I do not know what it will be for but it is a step forward.
My idea, after seeing that the Hisuite applications have nothing to do with the Samsung KIes (these are a lot better and if they leave your computer the same as the first day you bought it - I can certify it with my old Samsung Galaxy S3- ), is to wait for dc-unlocker to support our terminal and then re-unlock it.
Of funkey I do not expect anything, unless you charge us everything you can in case of "disaster" of our mobile.
Pretoriano80 said:
Huawei will always provide you with the same code, based on the original IMEI.
Try booting in fastboot and use this command : fastboot oem get-psid
If it works, it should return IMEI and Serial info, compare those with the ones from the retail box.
Click to expand...
Click to collapse
Grancapitan said:
Thank you very much, I will compare it, although the IMEI does not change, I do not know what it will be for but it is a step forward.
My idea, after seeing that the Hisuite applications have nothing to do with the Samsung KIes (these are a lot better and if they leave your computer the same as the first day you bought it - I can certify it with my old Samsung Galaxy S3- ), is to wait for dc-unlocker to support our terminal and then re-unlock it.
Of funkey I do not expect anything, unless you charge us everything you can in case of "disaster" of our mobile.
Click to expand...
Click to collapse
IMEI is not changed in the OS (About Screen), but if it's the same case as the rebrand with FH for Mate 10 Pro, then most likely that fastboot command will reveal a different IMEI.
If that's the case, then probably the only way to make the unlock code work is to restore your original oeminfo.
We've been lucky with Mate 10, because DC-Unlocker works, so we could get another unlock code for 4 €, but that doesn't work on P20.
Hi
I was hoping i could get some help and advice,i really want to root my device,but i am very experienced with Samsung no some much with this device.I have approached Huawei they will not give Bootloader unlock and i dont know what to do now. Do i have to unlock to install twrp ? Could some givee a guide as to what steps to follow ect to achieve my goal of magisk root,as far as i can see its the only root option.Do i have to unlock the Bootloader if so how
You need unlock code. Since huawei shown his chinese face in this matter you are stuck with stock or you can sell this phone
you can't unlock the bootloader we are FU***D by Huawei, this brick it's my first and my last huawei phone.