Related
The point of the topic:
Post your issues found in STOCK / CM11 or post a solution.Simple as that,very productive.
I'll start with a list of bugs:
CM11 ISSUES:
-Video recording lags in reduced luminosity.
-The phone heats too much when playing/watch videos for long time and so on.
-Volume during call is too low.
-Ocasionally freezes & crashes.
-Some graphical issues when the phone freezes.
-Wifi MAC Address is always 00:0a:f5:89:89:ff.
If there are 2 Xperia L using CM11 / Custom Kernel connected to the same wifi, both connections will be dropped.
STOCK ISSUES:
-Video blinks in low light(from what I've read it focuses wrong on the light source and starts blinking).
-The proximity sensor remains on after a missed call.
-Multi touch doesn't work as well as on CM11.
-Some weird freezes during call ( the screen remains off / freezes and you can't end the call / sometimes even answer )
-Camera doesn't have as much detail as in CM11 ( if you zoom in,the image doesn't clarify).
-Wifi MAC Address is always 00:0a:f5:89:89:ff.
If there are 2 Xperia L using CM11 / Custom Kernel connected to the same wifi, both connections will be dropped.
CM11 FIXES:
-Lag in video recording can be reduced by lowering the exposure.In medium to low light " - 1 " works pretty good and in very low to low light " - 2 " .However,when you use " - 2 " ,the recorded video will be very dark.Still haven't found a solution for this.
-About heating problem,you might want to try @Shivam Kuchhal 's kernel.He reported that his phone doesn't get heat up more than normal.
-About volume during call,it's been solved partially in newer releases by editing snd_soc_msm file.However,if the value is too high,the phne volume will also be too high and the speaker will produce distorsioned sound.However,I see they found a resonable value and both,the volume during call & speaker is about fine.
-For headset buttons not working,you must edit Generic.kl file.Here's a short tutorial to help you:
Go to: system/usr/keylayout/Generic.kl and change as below
key 226 HEADSETHOOK
key 256 BUTTON_1
change to
key 226 BUTTON_1
key 256 HEADSETHOOK
STOCK FIXES:
-For proximity sensor and weird freezes during a call use this tutorial .Haven't tested it personally,but people reported it works even on latest .17 fw.
-For Mac issue [ works for cm11 as well ]
1)Restore original MAC Address
Open /data/etc/wlan_macaddr0
Copy it's content. Ex: 01:12:13:14:15:16
Open /etc/firmware/wlan/prima/WCNSS_qcom_cfg.ini
Find this line
Code:
Intf0MacAddress=000AF58989FF
Replace 000AF58989FF with the content of wlan_macaddr0, but write back to front. Ex: from 01:12:13:14:15:16, write to 161514131201. So it will look like this
Code:
Intf0MacAddress=161514131201
Save & Exit, Reboot the phone
That's all for now,continue to post bugs&fixes and most important:
HELP EACHOTHER
Marius Cristian said:
The point of the topic:
Post your issues found in STOCK / CM11 or post a solution.Simple as that,very productive.
I'll start with a list of bugs:
Click to expand...
Click to collapse
Proximity fix not working!!!
More Kitkat Bugs List:-
1. Headset buttons
2. Camera experiencing crashes randomly, sometimes cause overexposure and being unstable at flash mode
3. Black graphical glitch/scanning effect first time after you turn your screen off then on again after first restart/turning on phone.
4. Call bugs(e.g. distortion etc.)
5. Lag when using the video camera
6. battery draining faster then on stock rom. (was improved on early nightly releases....now its back again)
7. GPS not working again (for some it does...others it doesnt....again...wasnt there on first nightlies)(Mostly Happens In CM11)
8. Camera quality is much,much worse then on stock rom
9 . Phone may left hanging and screen wont turn on for several seconds...
10. Some apps are unsupported on playstore...
CM11 bugs
CM11:
1. Switch to HDR mode and within 3 snaps camera app will FC.
2. Headset buttons.. I have to manually edit that Generic.kl after every nightly update.
3. As mentioned above, graphical glitch after updates.
Some of bugs that u mentioned @David pro has been fixed by users, but device maintainer didn't merged it for some reason in official builds. So, get started:
1. These buttons can be fixed, someone(I don't remember who, Sorry) has created a modified Generic.kl. You can find that file somewhere on this forum.
2. Camera quality is medium, but videos are very poor..
3. Still exist
4. @up
5. As I said, videos are bad
6. Caused by Google Play Services, 1st method is use xposed Framework and one of its add-ons, 2nd is just disable Services from Settings>Apps(i'm using second one, because I just don't like Xposed)
7.GPS is working fine, at least for me. No fix needed
8.Yep, on stock it is better.
9.It's caused by "Black graphical glitch/scanning effect first time after you turn your screen off then on again after first restart/turning on phone."
10.Well, some of them are only for one platform or type of devices,eg. Tegra 4 games.
No heating issues noticed so far(I use my kernel obviously) and yeah the camera and video quality isn't anything worth praising. Also the hwcomposer issue happens only one time after every boot, after that its all fine.
I normally use AOSPA.
Actually,I think the cm11 camera takes better photos than stock,but it can be buggy sometimes :silly:
About GPS,it's working fine for me too.
About video camera being laggy...I think it's because our phone lacks drivers update.It's hard to believe the video camera will ever be 100% fixed.
I'm sorry I'm kinda busy those days and I don't have time to administrate this thread.I'll edit the main post as soon as I can with solution you guys posted.But it's true,there are things which can't be fixed.Until I come back, HELP EACHOTHER
an another bug with stock rom is that "camera not available "or the camera takes a long time to recover after taking a shot
chrome browser restarts the phone or makes the phone to hang
vishalaestro said:
an another bug with stock rom is that "camera not available "or the camera takes a long time to recover after taking a shot
chrome browser restarts the phone or makes the phone to hang
Click to expand...
Click to collapse
Haven't experienced those kind of issues when I used stock.Try to do a factory reset or flash the ftf again.Maybe you added some mods or apps which affected the system.
Overall,we have to admit that CM11 is blazing fast and that's why I'm still using it.I'll update the OP now with your solutions.Thanks guys and keep helping eachother.
Marius Cristian said:
Haven't experienced those kind of issues when I used stock.Try to do a factory reset or flash the ftf again.Maybe you added some mods or apps which affected the system.
Overall,we have to admit that CM11 is blazing fast and that's why I'm still using it.I'll update the OP now with your solutions.Thanks guys and keep helping eachother.
Click to expand...
Click to collapse
another BUG with the stock ROM
1)walkman app flickers in the widget lockscreen
2)poor memory management need to restart the phone daily else the phone lags like a hell
3)camera app didn't respond ,it doesn't even the focus sometimes ,clearing the app data solves this problem temporarily and i think it was not present with the .12 update ,so if anybody could extract the camera app from the .12 update similar to the phone app freeze issue the problem might be solved.
3)walkman app or any other music player makes music to stutter when the same song is played more than one time provided if the songs are stored in memory card also i know that my sdcard doesn't have any problem because it worked fine with galaxy s3.my sd card is sandisk ultra class 10 32 gb
4)battery drain heavy when wifi is switched on compared to previous android 4.1.2
note:i have not rooted my phone or modded my firmware .all i run is the apps taken from the playstore.i have done a factory reset for more than 4 times.
CM11 / Stock (using custom kernel) bug:
Wifi MAC Address is always 00:0a:f5:89:89:ff.
If there are 2 Xperia L using CM11 / Custom Kernel connected to the same wifi, both connections will be dropped.
Solution:
Restore original MAC Address
Open /data/etc/wlan_macaddr0
Copy it's content. Ex: 01:12:13:14:15:16
Open /etc/firmware/wlan/prima/WCNSS_qcom_cfg.ini
Find this line
Code:
Intf0MacAddress=000AF58989FF
Replace 000AF58989FF with the content of wlan_macaddr0, but write back to front. Ex: from 01:12:13:14:15:16, write to 161514131201. So it will look like this
Code:
Intf0MacAddress=161514131201
Save & Exit, Reboot the phone
solution for Play Services battery drain in CM11
CM11 issues
1. GPS Not Working
2. NFC not Working.
3. NFC icon not provided in Status bar when NFC is ON.
4. Frequent Crashes : Blue Screen on latest Nightlies 20140827.
5. Camera quality getting worse.
chinmay1234 said:
1. GPS Not Working
2. NFC not Working.
3. NFC icon not provided in Status bar when NFC is ON.
4. Frequent Crashes : Blue Screen on latest Nightlies 20140827.
5. Camera quality getting worse.
Click to expand...
Click to collapse
Nfc icon not in statusbar is on all cyanogenmod/aosp based rom
chinmay1234 said:
1. GPS Not Working
2. NFC not Working.
3. NFC icon not provided in Status bar when NFC is ON.
4. Frequent Crashes : Blue Screen on latest Nightlies 20140827.
5. Camera quality getting worse.
Click to expand...
Click to collapse
1. For many people works,for some don't.I don't understand how's possible...
2.Haven't tested it...for me it's a useless feature.
4.Well,crashes happens.However,they're not too frequent.
5.I really like the photos cm11 takes.About video...another story.Try to notice the details in the photos in comparison with stock.
I am going back to stock in order to see if I can obtain(with all the bug fixes from here) a more stable software than cm11.I'll report to you soon guys.Until then, help eachother
@underd0g
Nice fix for WiFi-Mac interference problem. :good:
Marius Cristian said:
1. For many people works,for some don't.I don't understand how's possible...
2.Haven't tested it...for me it's a useless feature.
4.Well,crashes happens.However,they're not too frequent.
5.I really like the photos cm11 takes.About video...another story.Try to notice the details in the photos in comparison with stock.
I am going back to stock in order to see if I can obtain(with all the bug fixes from here) a more stable software than cm11.I'll report to you soon guys.Until then, help eachother
Click to expand...
Click to collapse
guys please try to solve the issues with stock ROM because they are the stable ones and the bugs are easily repairable if the bugs are reached to right hands.so pls first concentrate on stock ROM
I've been playing around with 4.4 video recording..what i think is the lags occurs when we record in low lights related with the kernel..i'm testing with snapcam as its has auto flash when recording in low lights..First result is same as stock..but in snapcam it has touch to focus when recording..after touch,the recording will get a bit darker when it refocus and walla..no lags..
What i found is, the camera will automatically reduced the exposure to -1 for avoiding the lags even it is on default setting..
When moving the camera in low lights,the recording will lags again after few second..that is with continuous focus..set to normal or auto..no lags..so our stock cam using continuous focus for recording..
Back to the kernel thing..from what i see from the recording is same like this when i'm playing with cnt rom to to get wifi and overclock working.
Ok,so I went back to stock.I'm amazed by the battery life,it lasted 2 days and I used the phone a lot ( especially for calls ).
However,after using the fix for freezes during call and so on,I still have experienced this morning an issue.While I was talking to someone,someone else called and the phone was beeping but the screen was frozen.I had to press the power button to lock the device then unlock it to get the screen to show who's calling and to give me the possibility to answer the call.What do you think I should do?For now I'll wipe phone app data,but I'm also waiting if someone knows a good,another solution to post.
Anyone know a way to remove the automatic shutdown?
My phone shuts down if it reaches 25%
Note: Since the patches essential for making this device work has been merged into LineageOS main repo, there is no need to maintain a separate unofficial build anymore. All fixes go to the official repository and you can expect the official LOS nightly builds to contain the most updated code. You can still use this thread for bug reports though. But bear in mind that some bugs that only appear on specific batches and cannot be reproduced on our devices are harder to fix.
Introduction
This is an UNOFFICIAL build of LineageOS for OnePlus 7 Pro (5G version NOT TESTED, probably won't work). While most features should be working, remember that this is a very early version and things could break, especially for a device as new as this one. I have literally just got hands on it last weekend and spent a few days fixing issues like the fingerprint scanner and motorized front camera. Please always flash with caution.
What's working
- All basic stuff like telephone, bluetooth, nfc, camera, volte, etc.
- Fingerprint scanner (works but with a few minor issues that doesn't affect using it)
- Front camera motor
- Light sensor (sort of, read below for information)
- 90hz screen (with some bugs described below)
Known Issues + TO-DOs
- When booting, the system will alert you of an "internal problem". This is completely fine, just ignore it for now no more internal problems since 20190629 because it comes with its own vendor image.
- Bluetooth audio not working sometimes. Fixed in 20190622
- Auto brightness doesn't work. Partially fixed in 20190622
- In some cases the phone will crash when playing audio. Seems to be problem of AudioFX. I'm looking into it. If you get stuck in recovery after the phone crashes, you can fix it by simply re-flashing anything. Even re-flashing Magisk will work. Fixed in 20190624
- Light sensor doesn't work exactly as it is in official ROM, causing some issues with auto brightness. This is due to the fact that the light sensor is located under the screen, and OnePlus seem to have some magic in their frameworks code to cancel the effect of the screen. For now, I did a very very dirty hack to make it at least work, but no magic is implemented. Expect some issues with this thing. If you find it annoying, I'd suggest disabling it at least for now.
- I have tried to implement an algorithm to correct the readings of the in-display ambient light sensor, but it is still very very funky especially in low-light environment. Fixed since 20190706
- Fingerprint scanning has some quirks here and there. Sometimes the screen goes entirely black except for the scanning area, sometimes the screen may flash a little bit while scanning (tried to reduce it since 20190629). On landscape mode it appears at the wrong place. (fixed since 20190629) But it at least works. I am working to figure out exactly how to make it perfect but it would take some time. (These were also bugs present on the OnePlus 6T / Xiaomi 9 implementation. I have tried to clean them up and fixed some of the issues that were present. At least the screen now doesn't dim like crazy as on OnePlus 6T / Xiaomi 9 implementation, because it dims the correct amount to make screen area other than the scanner circle to appear as bright or dark as it was before increasing the brightness for scanning. Also it works around the somewhat eye-straining Android brightness-changing animation by using a kernel interface provided by OnePlus, exactly as how they did this in their official ROM.)
(Note: if your fingerprint icon gets stuck on home screen, try the following steps: lock your phone, turn on the screen, swipe up for password/pattern unlock, then immediately press the back button, then use fingerprint to unlock. I'll try to get this fixed in the future.)
- Screen colors and refresh rate is a bit messed up when booting. If you find your screen laggy or strange, just turn it off and turn it back on. Fixed by a hack since 20190629, but expect a slight short blink when booting.
- No 48MP for camera. Kind of what you'd expect for these imx586 devices.
- This ROM doesn't come with its own vendor image yet. It needs to be flashed over OxygenOS to function properly. Comes with full vendor image since 20190629
- Importing keys to TEE does not work. Do not even try it, you may lose access to your data.
- SELinux is permissive.
How to flash
Use the TWRP recovery here https://forum.xda-developers.com/oneplus-7-pro/development/recovery-unofficial-twrp-recovery-t3931322
Since 20190629, you DO NOT need to flash OxygenOS before flashing this ROM anymore.
Note: this rom is only tested with firmware images from oxygen 9.5.5 for now. If you encounter any problem for things like mobile data, please try using firmware from 9.5.5 first.
This procedure is a bit tedious, but it's only because we are on an A/B system device.
1. Restart to bootloader, use `fastboot boot` to boot into the TWRP image
2. In TWRP, wipe data (better: format data)
3. Flash this LineageOS image (this installs it to the other slot)
4. Go to Reboot -> Bootloader (this will reboot to the other slot)
5. Again, use `fastboot boot` to boot into the TWRP image
6. Install OpenGAPPS / Magisk etc. (this installs to the current slot)
7. Reboot system
Downloads
20190706-1: https://mega.nz/#!LQxRhawQ!23i11FlIsO6LY35P1K3F1W0KRHGw8ozkUM66C3icdio
A lot of development has been going on this week due to luk1337, maintainer of official LineageOS for multiple devices, joining the party. Most of changes this week are either directly done by luk1337 or inspired by him.
- Corrected the calibration algorithm of the ambient light sensor. It works mostly fine now.
- Fixed support for in-display fingerprint sensor in Always-on Display mode.
- Fixed support for Wi-Fi Display
- Fixed LiveDisplay calibration / reading mode.
- Revamped the icon of in-display fingerprint scanner
- Fixed GNSS (GPS) support. Before this release, all the location information was network-based.
- Fixed NFC HCE.
- Added support for free-fall protection and manual-press warning for front-facing motorized camera.
- Fixed battery usage data.
History versions:
20190629-1: https://mega.nz/#!rRYRmIRY!4WW0FXYkWvu39t0LF-2RbRkl0aDfSbz_kjgZPotdLMQ
- Now comes with full vendor image, no need to flash OxygenOS vendor anymore.
- No more "internal problems" on boot anymore.
- Rebased the kernel
- Reduced screen blinking when fingerprint scanner is active (due to the rebased kernel)
- Hacked to make the screen work at 90Hz right after booting. No need to lock & unlock anymore (but expect a short blink while booting)
- Fixed double-tap-to-wake. Now the option in settings should be working.
- Fixed the position of fingerprint scanning circle when the screen is rotated.
- Tried to fix the ambient light sensor, but its behavior in an extremely low-light environment is still pretty funky. I hope maybe OnePlus can open-source their official algorithm to correct this thing...
20190624-1: https://mega.nz/#!nF4DwADT!xZ8tbrkCGtWL3A7DYIV_e6GfiprqGJXHEZLqufPCmmg
- Fixed crashes caused by playing audio
20190622-1: https://mega.nz/#!OMASTCZK!wXH7WdvVdAxqv7VjGzPwHy40Pk6cfghTGao-7u-PJQk
- Fixed bluetooth audio
- Added dash charging daemon
- Hacked to make the light sensor ( + auto brightness) at least work
20190621-1: https://mega.nz/#!rEglBKxS!OpA3tNSzlnpJ5pL8PW-x9Ax8Ee695GeIaDi4c-qcrw0
Stock Camera App
I have a modified version of the OxygenOS camera app here for use with LineageOS. It mostly works after a simple hack, however:
- No 48MP available. There must be some magic in official ROM on the frameworks side, and I doubt there is much to do about it
- Gallery integration does not work. Clicking on the gallery shortcut in camera will always say "no photos". You need to go to gallery app manually.
- Slow motion works but it will show a black screen when first started. Switching to another app and then back will fix it.
Remeber that I am not a professional camera modder at all. I have little knowledge in this field, and this is only a fallback solution given that nobody else has worked on modding the official camera of this device yet.
OnePlusCamera-guacamole-20190623: https://mega.nz/#!3YRWSKBR!lrRlslmenLXIBoUQQZnqydogKG4GZxmylX6rVHprHQs
Thanks
- LineageOS (obviously) and especially luk1337 (who maintains LOS for oneplus 6t also)
- OmniROM & phhusson (for their fingerprint scanner implementation as a basis, I cleaned it up a bit and abstracted device-specific logic from the somewhat messy frameworks implementation out to HAL. I think their original implementation for Xiaomi 9 / OnePlus 6T should have been done this way also.)
- All contributors to OnePlus 6T device tree of LOS & OmniROM (I took a good amount of code from there)
- HolyDragon guys (for their early work on the kernel)
- aviraxp
- Guaiyihu
XDA:DevDB Information
LineageOS for Oneplus 7 Pro, ROM for the OnePlus 7 Pro
Contributors
PeterCxy, ashwin4rc, holydragon
Source Code: https://github.com/PeterCxy/android_device_oneplus_guacamole
Kernel Code: https://github.com/PeterCxy/android_kernel_oneplus_sm8150
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: LineageOS
Version Information
Status: Beta
Created 2019-06-21
Last Updated 2019-06-21
Woohoo! Let the custom ROMs begin...
Let's begin the voyage.
+1 [emoji106]
Thank god for more rom development. I was starting to lose hope on this.
Thanks for this see piece of work.
My only question is atm why 9.5.5 if we have 9.5.8 already?
Thanks in advance #kudos
Gesendet von meinem GM1913 mit Tapatalk
Flashaholic said:
Thanks for this see piece of work.
My only question is atm why 9.5.5 if we have 9.5.8 already?
Thanks in advance #kudos
Gesendet von meinem GM1913 mit Tapatalk
Click to expand...
Click to collapse
+1
mcn1970 said:
+1
Click to expand...
Click to collapse
Flashed over 9.5.8 just fine. You will get vendor internal problem error tho
Any chance of it working on 1901 aka OnePlus 7? Should be working If the model check doesn't hardcode it to use on pro
Looks like on fps test I'm getting 90 although earlier I was getting 60 weird it bounces around like that lol also can't seem to get my Galaxy bids to connect or even get seen.
Edit. Also faceunlock seems to work pretty well also.
Flashaholic said:
Thanks for this see piece of work.
My only question is atm why 9.5.5 if we have 9.5.8 already?
Thanks in advance #kudos
Gesendet von meinem GM1913 mit Tapatalk
Click to expand...
Click to collapse
Simply because when I started it I didn't get 9.5.8. Didn't bother to update the blobs. But the rom should work ok on 9.5.8.
joemossjr said:
Looks like on fps test I'm getting 90 although earlier I was getting 60 weird it bounces around like that lol also can't seem to get my Galaxy bids to connect or even get seen.
Edit. Also faceunlock seems to work pretty well also.
Click to expand...
Click to collapse
Looks like there might be some problems with Bluetooth audio. Will look into it later.
PeterCxy said:
Looks like there might be some problems with Bluetooth audio. Will look into it later.
Click to expand...
Click to collapse
Also auto brightness seems to not work
Very nice! I hope in future build we might be able to choose between fhd+ and QHD resolution
Hopefully the Muppets repo will fork some, thanks for your work
Thanks for your work，I have already flash the img, and hope to find some bugs for you
How would it work if you don't have the EU version since 9.5.5 image is not the global version ?
xdamember143 said:
How would it work if you don't have the EU version since 9.5.5 image is not the global version ?
Click to expand...
Click to collapse
Use any one it doesn't matter
Nice to see here! Kudos
Running this baby
Only bugs
1. Bluetooth earphones won't connect to music but works with calls.
Really miss that 90ghz option, waiting for that to be added.
Please Help for this Solution.
Device : - Redmi Note 7 Pro
MIUI Version : - 11.0.5.0
Bug Description : -
- Too much laggy UI & Home Interface :-
When use in normal, UI lag sometime and feel
like heavy Interface.
- Bad RAM management :- Sometime apps can't
run in background and unable to open apps in
fluid way.
- Camera Interface has heavy hanging - When I
capture image with 12MP & Portrait and
48MP also image processing time is more
Than 10 seconds and opening of Picture
After Capture is too laggy and slow.
- Apps opening time increased - Apps are too
Slow to open and freezing in sometime.
- App Vault is freezing all time :- App Vault has
worst experience in MIUI 11. All Time it work
with lag & freeze.
- Features :- Video Dynamic Wallpapers and
Profile Video on Calling Screen feature is
missing and not much as other MIUI 11
phone.
- lack of Fluid & Smooth UI Interface :- User Interface is too slow. It look like heavy interface.
Switching App is laggy and frame drop issue.
I would suggest reset your phone once
No issues for me with this update.. All working fine.
And also please don't create seperate threads for asking doubts..,
There are specific threads, look around for it
After miui 11 update. My mobile working not smoothly as miui 10. It's feel like freeze something but not actual freezing
Main problem is fast charging not working properly. I'm getting highest 2200amp. But miui 10 it's starts at 3000amp & average amp 2400-2800 amp. *I'm using Q3.0 charger. My friend note 7 pro getting 2400-2900 amp average at same charger.* My friend don't get miui 11 update.he is also running miui 10.
Sorry for my extraordinary bad English
I Got a New Button on Navigation Bar, After Updating to MiUi 11 Manually. That button/Icon Looks Like a Human Standing With Hands Wide Open, in the bottom right corner.. And i am not able to disable or make it go away from there. There is no option anywhere to do so.
My roommate also updated with the same zip file which i gave him but there is no such button in his phone.
I updated from MiUi 10.3.13.0 to 11.0.5.0, via 2GB Zip File Provided In XDA, Redmi Note 7 Pro(Violet) India..
Issue Screenshot Link :- http://www.mediafire.com/view/u5igwy2652r43xq/IMG_20191107_111352.jpg/file
This Popup appears after clicking that button :- https://www.mediafire.com/view/w5qcdbg30ih2iz5/Screenshot_2019.jpg/file
Will appreciate if anyone can help.
Turn off accessibility in settings , that icon will go off?
nikhil_nitro said:
I Got a New Button on Navigation Bar, After Updating to MiUi 11 Manually. That button/Icon Looks Like a Human Standing With Hands Wide Open, in the bottom right corner.. And i am not able to disable or make it go away from there. There is no option anywhere to do so.
My roommate also updated with the same zip file which i gave him but there is no such button in his phone.
I updated from MiUi 10.3.13.0 to 11.0.5.0, via 2GB Zip File Provided In XDA, Redmi Note 7 Pro(Violet) India..
Issue Screenshot Link :-http://www.mediafire.com/view/u5igwy2652r43xq/IMG_20191107_111352.jpg/file
This Popup appears after clicking that button :- https://www.mediafire.com/view/w5qcdbg30ih2iz5/Screenshot_2019.jpg/file
Will appreciate if anyone can help.
Click to expand...
Click to collapse
That seems to be an accessibility feature, as said by someone in the comments turning off the respective accessibility in Settings should remove that.
Satendrayadav0001 said:
Please Help for this Solution.
Device : - Redmi Note 7 Pro
MIUI Version : - 11.0.5.0
Bug Description : -
- Too much laggy UI & Home Interface :-
When use in normal, UI lag sometime and feel
like heavy Interface.
- Bad RAM management :- Sometime apps can't
run in background and unable to open apps in
fluid way.
- Camera Interface has heavy hanging - When I
capture image with 12MP & Portrait and
48MP also image processing time is more
Than 10 seconds and opening of Picture
After Capture is too laggy and slow.
- Apps opening time increased - Apps are too
Slow to open and freezing in sometime.
- App Vault is freezing all time :- App Vault has
worst experience in MIUI 11. All Time it work
with lag & freeze.
- Features :- Video Dynamic Wallpapers and
Profile Video on Calling Screen feature is
missing and not much as other MIUI 11
phone.
- lack of Fluid & Smooth UI Interface :- User Interface is too slow. It look like heavy interface.
Switching App is laggy and frame drop issue.
Click to expand...
Click to collapse
Do a clean format ... Or revert back to MIUI 10 if BL unlocked try custom roms
Hi, I'm using MIUI xiaomi.eu stable v11.0.4.0.
After my device update from miui 10 to miui 11 everything works fine. But after I install magisk, my device getting boot into twrp.
At first the device is turn on for about 45 secs and then turn off and goes to twrp.
To fix this, I Reinstall miui 11 package and then clear delvik then my device is back to normal.
But when I try to install magisk again, my phone keep getting boot to twrp like I mentioned before.
Anyone have same issue?
Hi, I'm using MIUI stable v11.0.4.0 on Redmi Note 7. After the update, I cannot scroll down notification panel while I'm using any app (vut it works fine while on home). Furthermore, the status bar is completely black colored, and no interaction is possible.
I tried everything, but the problem persists, even with rotated screen.
The only times it works correctly, it's while I'm on lock screen (here, status bar is transparent as it should be, and I can scroll down the panel without any issue).
Anyone is facing this issue? Any ideas?
Can You tell me, how can You install twrp i just can't, i try bi mitools but get stuck un the password, and by adb just reboot un fastboot again
Sometimes work Ok, sometimes not!
During call, first 5-10 sec, I dont understand any word. Bad noise.
1 of 4,or 5 cals.
Icon I must press 4-5 times, or hit in middle of icon with big finger..
It is a bug...
Screen sometimes freeze, i cant move page, few seconds..
Every few days must restart phone...
It is far away with software, from old huawei with 3gb ram, (now I hawe 6, and double, slower phone)..
---------- Post added at 07:10 PM ---------- Previous post was at 07:07 PM ----------
Sometimes work Ok, sometimes not!
During call, first 5-10 sec, I dont understand any word. Bad noise.
1 of 4,or 5 cals.
Icon I must press 4-5 times, or hit in middle of icon with big finger..
It is a bug...
Screen sometimes freeze, i cant move page, few seconds..
Every few days must restart phone...
It is far away with software, from old huawei with 3gb ram, (now I hawe 6, and double, slower phone)..
Internet and wi-fi sometimes is very very slow, but that is not nessesery phone problem, but I think it is..( When compare with old phone on same wi fi and sim)..
Issues with my redmi note 7pro
After the recent miui update like mentioned in the above complaints, I too am facing lag, charging issues, battery life issues and my phone doesn't charge once in a while when plugged in. And also I am facing extra draining of my data and receiving of weaker signals on my sim card.
My RN7 works laggy and buggy after Miui 11.0.4 update, specially after using gcam.
The UI crashes very often at the point that the three navigation buttons don't work. After closing all the apps and cleaning background Ram, it works laggy as hell taking 15 seconds to save a photo on Google Photos and 4 seconds to open a group of icons from Miui desktop.
After restarting it works fine, but slower than Miui 10.
RN7 was working great, I was very happy with it like when I bought the RN3, but the last update turned it into crap.
diego_01 said:
My RN7 works laggy and buggy after Miui 11.0.4 update, specially after using gcam.
The UI crashes very often at the point that the three navigation buttons don't work. After closing all the apps and cleaning background Ram, it works laggy as hell taking 15 seconds to save a photo on Google Photos and 4 seconds to open a group of icons from Miui desktop.
After restarting it works fine, but slower than Miui 10.
RN7 was working great, I was very happy with it like when I bought the RN3, but the last update turned it into crap.
Click to expand...
Click to collapse
No
Wowdog2 said:
No
Click to expand...
Click to collapse
Yes.
But my phone is RN7, not RN7 Pro, so I apologize, I didn't realized where I was posting.
Hey guys can i install miui 11 back after installing pixel latest rom which is based on android Q
I got new device yesterday NOTE 7 PRO VIOLET
I need help
i have problem with my violet with a update of miui 11.0.1 and android 10, i use always a tethering functions for my work and with the update it functions do even work more.
i follow all steps:
- restart default a phone DONE
- reenter all access point datas DONE
- i even test this solution settings get global tether_dun_required, settings put global tether_dun_required 0
with a adb shell i ping to 192.168.2.8 and works, but if i share from usb or wifi hotspot not allow to reach the ping...
Please help...
MUI 11 with android 10 is released with MI-ROOM devs.
mi 8 ported
down- https://portal.mi-room.ru/roms/
:cool
9.11.14 update -
gaming performance good ( played more than 12 hours and only 1 crash )
battery backup - normal ( 20% drain for 1 hour COD play with 80% brightness
allround stable for daily use
no notification delay or app crashes.
mifit app runs in the background all the time when enabled from setting so app stability is good.
several new developer option features (to use google feed instead of MI assist)
*Sometimes minor UI bugs like small delays
*gesture navigation is less fluid than MIUI 10
*custom kernels not working
Have you flashed this?
How is it?
omkarmahananda said:
Have you flashed this?
How is it?
Click to expand...
Click to collapse
yes, testing.
it seems stable
Thanks for sharing :good: i'll try it out..
Amineka00 said:
Thanks for sharing :good: i'll try it out..
Click to expand...
Click to collapse
welcome
Will Dirty flash on miui 11 work?
omkarmahananda said:
Will Dirty flash on miui 11 work?
Click to expand...
Click to collapse
No! Clean install is needed.
Sent from my POCO F1 using Tapatalk
omkarmahananda said:
Will Dirty flash on miui 11 work?
Click to expand...
Click to collapse
you're going from pie to 10. You should clean flash IMO
Stock camera potrait mode do not work.
dark mode has some bugs ( status bar battery and wifi icon )
gaming performance not the best
stable
Has Face Unlock?
AstroBiswas said:
Has Face Unlock?
Click to expand...
Click to collapse
yes,the standard poco ir face unlock.
Love this rom. Only First start was a little Trouble because it was in russian but Google helped me for Translation and i could get it to German. Very fast and stable Rom is my Fist impression
after trying this rom for half a day......notification delay(especially whatsapp),
wifi signal strenght is below average,
you cant hide notification shade in lock screen,
silent icon in audio side menu remains showing silent even
after silent is deactivated!!
battery is below average!!.
switching wireless display on turns bluetooth on as well!!(weird).
led sometimes doesnt blink with notification(although turned on in settings!!).
sound during pubg is improved.
coming from pixel experience 10 beta which has its own bugs......miui is a joke!!.
ron_hyatt said:
after trying this rom for half a day......notification delay(especially whatsapp),
wifi signal strenght is below average,
you cant hide notification shade in lock screen,
silent icon in audio side menu remains showing silent even
after silent is deactivated!!
battery is below average!!.
switching wireless display on turns bluetooth on as well!!(weird).
led sometimes doesnt blink with notification(although turned on in settings!!).
sound during pubg is improved.
coming from pixel experience 10 beta which has its own bugs......miui is a joke!!.
Click to expand...
Click to collapse
I dont have a noti delay. Fine here.... Did you Clean flash/installed WhatsApp and diabled battery optimision from MIUI?
Also silent Icon is normal here battery is like Android 9 EVO or Pixel. Didnt notice a difference
LED i dont know...
oiseau1201 said:
I dont have a noti delay. Fine here.... Did you Clean flash/installed WhatsApp and diabled battery optimision from MIUI?
Also silent Icon is normal here battery is like Android 9 EVO or Pixel. Didnt notice a difference
LED i dont know...
Click to expand...
Click to collapse
yes i always clean flash ,i disabled battery saver for whatsapp but notifications still rings after 2nd or 3rd message . 1st message takes 1-2 mins to ring!.
pixel experience 10 beta notifications are instant without even changing batt. optimization settings
too bad miui is loosing compared to pe.
Strange I don't have such issues. In my opinion MIUI is faster and more stable then pe also I had very often touch issues on pe and Evo. Even with newest firmware. So every one like he want to have. It's your choice what you are using.
oiseau1201 said:
Strange I don't have such issues. In my opinion MIUI is faster and more stable then pe also I had very often touch issues on pe and Evo. Even with newest firmware. So every one like he want to have. It's your choice what you are using.
Click to expand...
Click to collapse
i am having the opposite.....pe 10 beta (14/9/19) build is faster/smoother than this rom and it picks Lte signals in places where miui barely got unstable H+ and battery is much better.
Interesting, I'm on the last Mi9 port still - MIUI 11 but Android 9 - guess I'll try a clean flash and see how it goes!
There's one small problem: because the Mi8's notch is bigger than our phone, the software actually blackout a bit more on the statusbar than the official MIUI11. So if you're doing anything that is fullscreen, basically you're getting less screen real-estate. Not that it's useful for anything, just an observation
Android 10
Release date: Tuesday, May 26th, 2020
Build Version: QKQ1.191002.002.V11.0.5.0.QDLMIXM
Kernel Version: 3.18.124-perf-g6d04eb4a
#1 Mon May 18 22:15:26 WIB 2020
Bootloader Version: MSM8953_DAISY2.0_20200518220803
Baseband Version: 953_GEN_PACK-1.202044.1.240106.1,953_GEN_PACK-1.202044.1.240106.1
Android Security Patch Version: May 2020
Please report bugs via Xiaomi's Feedback app.
How to Generate Bug Reports
Bugs:
1- [email protected] fps Video Recorder doesnt work on OmniVision OV12A10 Camera sensor. (Tap here for more info)
2- Still no way to discard Setting app suggestions.
3- Screen Lock/Unlock sounds doesnt work. (Factory reset fixes it)
4- Sim settings does not respect system theme. (only white) Source
5- Old charging sound still persist. (Factory reset fixes it)
6- Customize your Pixel still there. (Factory reset removes it)
7- Wifi icon on the statusbar is flickering. (Still same after factory reset)
8- Sometimes Wifi and Cellular icons on the statusbar is turning black while others white.
9- Direct share is broken. Source (Same after factory reset)
10- Some options in the Network settings are not translated correctly. Source
11- Volte still does not work (despite activation in options, the phone during the call switches to 3G network and does not display the volte icon) Source
12- 4G speeds slightly slower then Android 9 Source
Missing features:
1- There is no Equalizer.
Enhancements:
1- Second Stable Android 10 release.
2- It comes with May 2020 Android Security patch.
3- Sim card disabling option is fixed. Source
4- Camera sound deactivation works now. Source
5- Fixed! Uninstalling an huge app&game freezes the whole phone for a while. Source - Still same
Battery Life:
- One Sim,
- 2G only,
- Mobile Data off,
- Wifi,
- Brightness Auto,
- Battery Saver enabled at %10
- Adaptive Battery disabled
It gived 12 hours SOT. Check the SS's. Pretty much same as v11.0.4
Notes:
This is the second stable Android 10 update for Xiaomi Mi A2 Lite. There was a March 2020 Security patch in the first stable Android 10 update. Arrived 42 days later after v11.0.4
3DMark Test Results: (v2.0.4661)
Slingshot Extreme OpenGL ES 3.1 - Overall score 465
Slingshot Extreme Vulkan - Overall score 516
It will be beneficial to restart your phone after the first installation.
If you want to improve the performance of your phone tap here.
I will constantly update this topic.
perfect_ said:
Android 10
Release date: Tuesday, May 26th, 2020
Build Version: QKQ1.191002.002.V11.0.5.0.QDLMIXM
Kernel Version: 3.18.124-perf-g6d04eb4a
#1 Mon May 18 22:15:26 WIB 2020
Bootloader Version: MSM8953_DAISY2.0_20200518220803
Baseband Version: 953_GEN_PACK-1.202044.1.240106.1,953_GEN_PACK-1.202044.1.240106.1
Android Security Patch Version: May 2020
Please report bugs via Xiaomi's Feedback app.
How to Generate Bug Reports
Bugs:
1- [email protected] fps Video Recorder doesnt work on OmniVision OV12A10 Camera sensor.
2- Still no way to discard Setting app suggestions.
Missing features:
1- There is no Equalizer.
Enhancements:
1- Second Stable Android 10 release.
2- It comes with May 2020 Android Security patch.
3- Sim card disabling option is fixed. Source
4- Camera sound deactivation works now. Source
Battery Life:
N/A
Notes:
This is the second stable Android 10 update for Xiaomi Mi A2 Lite. There was a March 2020 Security patch in the first stable Android 10 update. Arrived 42 days later after v11.0.4
It will be beneficial to restart your phone after the first installation.
I will constantly update this topic.
Click to expand...
Click to collapse
Is third party launcher supported now?
Using gesture screen options.
gusbalaa said:
Is third party launcher supported now?
Using gesture screen options.
Click to expand...
Click to collapse
No.
-Facebook applications can't record video (Video capture fail error)
-------Found problem--------
The only system wide equalizer system that still works (the one explained here) on our device is causing the problem related to recording video in Facebook/Facebook Messenger/Instagram. Force closing the app now enables the video recording and as soon as the app is restarted the problem occurs again. And that's weird because the DSP isn't supposed to mess up the microphone or whatever facebook finds faulty and cancels the recording... Weird... Will look this up and update if solution is found.
Going back to the PRO version of that app now totally ignores the volume control of the device, which means in this .5 built the audio paths were modified. With pro version video recording is still failing. This is not a fix from xiaomi, this is an internal workaround, which is bad!!!
Even clearing the system, problem still persists. Checked permissions, checked storage writing, all is working, except video recording.
--------End of edit--------
-Sim settings does not respect system theme (only white)
--------Lazy modding from Xiaomi, this is the same dual sim controller app you had in Android Pie, just thrown in the Q environment--------
-Refreshing external device problem still persistent, new data copied on to the device only visible after reboot.
--------Not the only one with this problem, this is basically related to having huge folders on your SD card. I have a folder with >15k files in it)--------
-Sometimes some large games force close, but are fine after restarting the app (only sometimes - Only applicable on Gameloft ones - Totally unimportant)
What was fixed:
-Video record sound can now work with Google Voice turned on
-Ram management works fine for me (4/64)
??? Questionable effects:
-Lock screen sounds work for me (testing after a reset, still working just fine)
-Charging/USB sounds seems too low for me (problem persists, the vibration of the device is actually covering the sound)
Other than this, everything else remained the same as per what I wrote in my previous replies.
Qualcomm's app for data collection is still there, so this may be another partial release. They fixed something but the broke something else in another place.
Another lazy update, the battery is draining much faster than on .4 version, waiting for calibration. I'm starting to get sick over their incompetence to test and deliver a good end user experience.
OTA Link: https://bigota.d.miui.com/V11.0.5.0.QDLMIXM/miui_DAISYGlobal_V11.0.5.0.QDLMIXM_4e152f6600_10.0.zip
Let's not conclude quickly that the memory leak has benn fixed. I am trying to trigger it.
edit:
The device did not wake up from sleep, I got a random reboot.
magisk works as it should.
I install the update OTA this morning from official pie, the phone work well, the phone signal is a bit weak but all works well. No gesture in smart Launcher 5, i have fluid gesture for this feature.
Inviato dal mio Mi A2 Lite utilizzando Tapatalk
TeoXSD said:
-Facebook applications can't record video (Video capture fail error)
-Sim settings does not respect system theme (only white)
-Refreshing external device problem still persistent, new data copied on to the device only visible after reboot.
Click to expand...
Click to collapse
- Facebook and Messenger works fine with Camera.
- Sim settings same (only white)
- I am using Cx File manager works fine
Screen Lock/Unlock sounds work fine for me!
key-ancel said:
Screen Lock/Unlock sounds work fine for me!
Click to expand...
Click to collapse
Mine doesnt work.
perfect_ said:
Mine doesnt work.
Click to expand...
Click to collapse
Mine doesn't work too.
It began after upgrading to Q.
Also did two reset through settings, but nothing changed, still missing.
Have you maybe tried to flash fastboot image ?
srepole said:
Mine doesn't work too.
It began after upgrading to Q.
Also did two reset through settings, but nothing changed, still missing.
Have you maybe tried to flash fastboot image ?
Click to expand...
Click to collapse
I upgraded through ota from 10.0.18 to 11.0.4 and then i did Factory reset;
- New Charging sound was gone
- Lockscreen sounds doesnt work neither v11.0.4 nor v11.0.5
Anyone else getting super slow charging with this update? This is my first attempt to upgrade from Pie, and I've gone from 23% to 25% in almost an hour on standby...
- Direct share is still not available.
Please what do i do?
My phone is stuck with boot loop after upgrade to android 10.
how can i downgrade?
hi all!
face unlock function is gone completely, but after poking around I found that is the 'feature' and requirement of android 10 due to google's security concerns. ok...
but the problem I am facing is of a different nature. After update, I did factory reset but did not remove fingerprints prior to that operation. Now fingerprint enrolment fails every time I attempt to add another fingerprint. I was doing some digging around before posting this, and I already did try some of the solutions suggested for some other models which I have found scattered across XDA / so I already did boot twrp and erased via twrp file manager some of the files in /persist/data but that did not help.
any suggestions that could help, please?! thank you!
also, did anyone find a way to get rid of CUSTOMIZE PIXEL message?
Matty Watty said:
also, did anyone find a way to get rid of CUSTOMIZE PIXEL message?
Click to expand...
Click to collapse
Yes: -
1. Sell Mi A2 Lite
2. Buy a Pixel
Seems bizarre that the Pixel would not force this message on you and the Android One phone would but at the point this phone is exactly that, just a bizarre curiosity. Bye bye Xiaomi.
Matty Watty said:
also, did anyone find a way to get rid of CUSTOMIZE PIXEL message?
Click to expand...
Click to collapse
You've got to hand-exit the XML file in the settings suggestion data folder. You'll need root. Or you could boot (not install) TWRP and edit from there.
If your bootloader is locked, there doesn't seem to be any way to stop it. You can clear data on settings suggestions but the suggestions will come back and can't be dismissed.
a1291762 said:
You've got to hand-exit the XML file in the settings suggestion data folder. You'll need root. Or you could boot (not install) TWRP and edit from there.
If your bootloader is locked, there doesn't seem to be any way to stop it. You can clear data on settings suggestions but the suggestions will come back and can't be dismissed.
Click to expand...
Click to collapse
thanks. my boot loader is unlocked so I can boot easily into twrp. But I am not sure what do you mean with hand-exit and which exactly folder that xml file is in? thanks again.
Matty Watty said:
thanks. my boot loader is unlocked so I can boot easily into twrp. But I am not sure what do you mean with hand-exit and which exactly folder that xml file is in? thanks again.
Click to expand...
Click to collapse
From here...
https://support.google.com/android/thread/24667791?hl=en
This happened to me after upgrading a Xiaomi Mi A2 to Android 10 from Android 9.
Might be related to the "/data/data/com.android.settings.intelligence/shared_prefs/suggestions.xml" file not updating some values properly, since some users with rooted systems have changed manually this values to "true":
<boolean name="com.google.android.gm/com.google.android.gm.setup.AccountSetupFinalGmailSuggestions_is_dismissed" value="true" />
<boolean name="com.android.settings/com.android.settings.notification.ZenSuggestionActivity_is_dismissed" value="true" />
And the suggestions don't appear to them anymore.
I had to do this a few times, as new things popped up.