Related
Hey guys,
After working on my Cricket/Aio Galaxy S4 for days and finding very little development tips, I decided to write my own full guide on how to root, install a custom recovery (TWRP) and flash a custom ROM for the SGH-I337z.
Before we begin, I am not responsible for any damage, including physical damage due to frustration, that you may inflict on your device. If at the end of this, your phone is nothing but an expensive paperweight, I must apologize, but assume no responsibility. If you are not comfortable using Odin or flashing ROMs, I suggest reading a little more on the subject before moving forward. This is a detailed guide for a specific device that is difficult to find help for. This isn't a step by step guide for a first time flasher. You have been warned.
First, download and install the Kingroot apk. Do a quick Google search for this. It is a Chinese root method that I know for a fact works, where Kingoroot and Towelroot fail. Trust me, I tried Kingo and Towelroot just as many times as you. It also installs it's own sub-par version of Superuser called Kinguser. Nothing great, but it gets the job done. If you only want root, you are done. Install the app, run the app, run Root Checker. From here you can uninstall system apps, overclock, etc. Keep in mind, if you uninstall either of these, you lose root access.
If you want a custom recovery/ROM, here's how:
First thing I did was flash the recovery. But it has locked bootloader right? Right. So we are going to Odin flash the recovery. Although it is a custom recovery, flashing through Odin will allow you to bypass the bootloader lock. First, you will want to download the recovery image. http://www.mediafire.com/download/j6ml64w1ldixklq/jflteaio_twrp.img
Now put this somewhere you can find it.
Next you will need to download the .tar converter tool and convert this .img file you just downloaded into a .tar.md5 file so that Odin can flash it. There are instructions in the link and it is very simple.
http://forum.xda-developers.com/showthread.php?t=2446269
Once you have converted the img, Open Odin, and boot your phone into download mode by holding Volume down and power, and plug it in. Odin should notify you it has been "Added!" Select PDA, and navigate to the recovery img that you just converted to the tar file. Select this file, then make sure Auto Reboot is the only other box checked, and hit start. It should only take a few seconds, and you should be greeted with a "Success" message. Allow the phone to reboot into recovery. It should do it manually, but if not, boot into recovery by holding Volume Up+Home+Power. It should load the TWRP splash screen. If this happens, it was all successful.
That is the hard part honestly. Once you're recovery is installed, you're golden, Pony Boy. Download a compatible ROM and install the zip via TWRP recovery. Unfortunately, from what I understand, Touchwiz based ROMs are the only ones compatible with this method. I am using Skyfall as suggested in another thread I saw, and it is great. Looks just like stock, but enables Wifi Tethering (which Cricket currently blocks) and comes with a couple other cool features. It also uses Aroma installer which allows you to customize the installation, meaning you can choose to have Xposed Modules and Wanam Xposed installed by default, and NONE of the Samsung apps from default.
Here is the link for a ROM that I know for a fact works flawlessly: http://forum.xda-developers.com/showpost.php?p=55524201&postcount=4
KEEP IN MIND---Cricket/Aio must install the AT&T variant from Aroma installer. Others may work, but this is the only one I can confirm. Internally, they are the same phone. LTE, Wifi, Bluetooth all confirmed working.
Following the steps provided everything worked up until I reached odin. I downloaded and converted the jflteaio_twrp.img to jflteait_twrp.tar.md5 and my phone has root access provided by kingroot.
I tried using Odin3 v3.04 3.07 and 3.10.7 no matter the version always following "<ID:0/005> NAND Write Start!!" I see "<OSM> All threads completed. (succeed 0 / failed 1)".
I know this post was last updated June 30th 2015 so my versions of Odin should be working. Please help, Thanks
Try using Heimdall Suite to flash recovery. Once downloaded unzip file to desktop. Follow these instructions next.
- Boot the Galaxy S4 into download mode (Vol Dwn + Pwr Up).
- Run zadig.exe from the Drivers folder of the Heimdall Suite.
- Choose Options > List All Devices from the menu.
- Select MSM8x60.
- Click Install Driver.
- If prompted with a warning the installer is unable to verify the publisher of the driver, select Install this driver anyway. Further prompts about security may pop-up, select the options which allow the installation to continue.
- Place recovery image in heimdall folder(rename the img to recovery.img) Do not covert img to tar it needs to stay as a img file.
-Next open command window inside the Heimdall folder you unzipped by holding shift and right clicking. Then select open command window here. In the command window type the following.
(heimdall flash --RECOVERY*recovery.img) .Once it's finished the phone should reboot. Let it reboot if it doesn't just do a battery pull and reboot into recovery mode by pressing volume up+home+power .Once it's finished the phone should reboot. Let it reboot if it doesn't just do a battery pull and reboot into recovery mode by pressing volume up+home+power. That should work.
I have been derailing the internet trying to figure out some way to root my device with and without usb connecting it to my mac. Frankly, as far as I can tell my mac and my phone won't support mass storage of android so odin etc seems out of the question. I just want to find a way to get my phone rooted (tried kingroot and it asked for computer and I've a mac so there you have it). Please if anyone could help me find a simple, maybe even complicated way to root my s6 (it's updated fully).
Define without USB? Like no OTG USB Storage or no USB cable? If that's the case then you're asking how to root the device without a computer which afaik with Samsung isn't an easy deed (perhaps not possible).
-------------------------------------------------------------------------------------------------
Firstly, you do this at your own risk. Js.
However.. If you can get it up and going on your Mac then try out Heimdall (the Mac/Linux Odin alternative some whiz managed to reverse engineer).
P.S. I have Linux but I've seen Heimdall is available on Mac, unfortunately I can't step you through installation.
https://forum.xda-developers.com/showthread.php?t=2118100
Go to the TWRP.ME site and locate your device and download the latest TWRP image (should be 3.1.1.0)
https://dl.twrp.me/zerofltetmo/
Download dm-verity encryption disabler (without this, it's likely things won't go as planned, it ensures you haven't modified system files etc)
https://androidfilebox.com/miscellaneous/dm-verity-and-forced-encryption-disabler/
Choose a Root method (personally I prefer Magisk but for a first time superuser provider I would recommend SuperSu:
https://download.chainfire.eu/1114/SuperSU/SR1-SuperSU-v2.82-SR1-20170608224931.zip
[ PLACE PHONE IN DOWNLOAD MODE: Hold VOL-DOWN + HOME + LOCK, then press VOL-UP ]
1. Go to Utilities Tab
2. Click Detect Device; if it is not detected you have a problem (find fix then go to Step 3)
3. Output reads Device detected; beneath Download PIT save the file somewhere (e.g. Documents/s6.pit)
4. Go to Flash Tab
5. Beneath Options > PIT, browse for the .pit file you saved in Step 3
6. On the right hand side, beneath Partitions (Files) click > Add, on the left change the partition name to Recovery (where it will ask for a recovery.img file)
--- READ STEPS 7-9 BEFORE YOU DO THEM ---
7. Select the TWRP.img you downloaded earlier
8. Click Start, pick your phone up (be careful not to disconnect it)
9. AS SOON AS THE SCREEN GOES BLACK, HOLD: VOL-UP + HOME + LOCK
--- READ STEPS 7-9 BEFORE YOU DO THEM ---
10. If done correctly (and your bootloader is unlocked, and your RA lock is disabled) you will be in TWRP Recovery. Swipe to allow system modifications (you can always come back here later, you asked for Root so this will suffice).
11. Use Finder (File Browser) to navigate onto the phone from your Mac and copy SuperSU and no-verity onto the Internal Storage
12. From TWRP (on the phone) tap on the Install tab and if you aren't able to see the two .zip files you copied over, you're probably in the / directory; navigate to /sdcard
13. Tap on the no-verity.zip first, continue through, don't worry about using multiple .zips just install and go back when it is complete
14. Tap on the SuperSU.zip. Continue through, same as previous step, this time backing out to the TWRP menu and tap on the Reboot Tab > Choose System
15. If prompted to install anything (TWRP) untick the boxes and tap do not install.
16. Your device should be rooted. Don't turn the phone off, don't panic. SuperSU can cause the first one or so boots to end prematurely and the device will reboot (don't be alarmed if it cuts out).
Note:
On the odd chance that your device is stuck in a bootloop or you are worried about 'bricking' the phone, the only way that can happen (afaik) is if you disconnect during important installations such as during the Odin/Heimdall flash process or TWRP (under certain circumstances, even during Odin/Heimdall you can normally pull through). Otherwise, you'll just end up with a soft-brick (99.9% of the time this is the only thing that happens)
glgl
i am making this post because i have an lg v20 running 20h. there was no root guides available, so i decided to root mine using an older guide. it succeeded, but was very hard and time consuming. Being a noob at the time, i was also extremely nervous that i could possibly brick my phone or screw something up. i didn't, and no part of this should brick yours either. ***However - if you do somehow break your device in any way, that is on you. by completing these steps, you assume full responsibility. now that we have that out of the way, lets continue. at the end of this guide, you should have a rooted device with your choice of os (7 or 8 - or even a custom rom if you choose!). you should also have twrp. this guide would not have been possible without users runningnak3d and clsA
**** Also, during this Proccess, Your Phone WILL be wiped clean!!! don't forget to back up photos, videos, etc...*****
don't download any other files than from this guide.
1. download these files (required) https://lg-firmwares.com/downloads-file/4578/H91510e_00_VTR_CA_OP_1205.kdz (for a rootable os that we can flash, - get this also (required) https://forum.xda-developers.com/v20/how-to/guide-patch-lgup-to-unlock-features-t3652222 this program is called lg up and has been patched to work with this phone. you will also need this. https://androidfilehost.com/?fid=1322778262903990218. these are the root files and need to be all in the same folder as where lg up is installed. you will also need to have access to fastboot and need to have adb installed. that is pretty easy, give it a google search if you still need help.
if you are running 32 bit, get this https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads
this is the OS. get nougat, which has like three less steps (you can't upgrade to oreo on this os once rooted) or scroll down and get the oreo file. nougat (really old version) https://drive.google.com/file/d/1S82HVNt2rAtXgBY499IBJnoCVFnpCf_X/view
Oreo - get this first file, and the ones under it. https://www.androidfilehost.com/?fid=1322778262904015326
***https://androidfilehost.com/?w=files&flid=283977*** You have to have this file if getting oreo. if you chose nougat, then don't get this.
2. Now that you have everything downloaded and installed, put your phone into download mode. (power it off, hold the volume down button and plug in a usb c cable attached to your pc. don't stop holding volume down until you see download mode.)
3. once it is in download mode, open up lg up. select your device, (it should be in standby mode, according to lg up) and click dump (this is a total backup of the phone, you are lucky you know this right now, I didn't when i rooted mine) . it will bring up a file explorer, select where you want it to save to. (I chose my desktop). once you have a folder selected., it will bring up a bunch of options for partitions. click select all and uncheck user data. ****Make SURE that you don't unplug your phone during any part of this process or any other process in this guide, it will permanently brick it. ***** ow that you have selected everything but userdata, click start.
4. once that finishes, you will have made a full backup of your phone in case something goes wrong.
then click the partition DL button and select the h915 v10e kdz file (the file that i said was the rootable os we can flash) (the first file you downloaded). make sure bin file stays checked. then click start. once that finishes, your phone should automatically reboot into an old nougat operating system. then go to settings, enable developer options, and turn on usb debugging. that is easy, if you can't figure it out, google is your friend. now you should have no cellular signal. this is not the permanent ROM.
5. go to the play store and download terminal emulator for android. (once usb debugging has been enabled
then go ahead and go to the folder where you extracted the root files/package. hold shift and right click to open a command windows there or powershell, whatever your pc says. open 2 of those windows. then, in the first one, type, adb logcat -s dirtysanta
****don't close this window.*****
then in the other window, type STEP1.BAT
*****don't close this window.***** It may take a minute, but after a while it will let you type again. once you can, type run-as con
chmod 0777 /storage/emulated/0/*
6. then, pull up the window you used the logcat command in. leave it there so you can watch it
then, on your phone, go to the terminal emulator and type applypatch /system/bin/atd /storage/emulated/0/dirtysanta
once you do that, glance at the logcat window. once it says to run step 2, go to the window where you typed step1.bat. type STEP2.BAT
at this point, your phone should go ahead and reboot and say fastboot mode up at the top. now, go to your window where you typed all the .bats and type STEP3.BAT. wait until your phone reboots and you will see a screen saying that you can;'t use your phone. this is bogus, just ignore it and wait like 10-15 seconds for it to get past that screen. then it will boot that android and you should get a green screen.
Now, quickly, pull the battery from your phone. leave it out for a little while while we prepare the next steps.
If you want oreo, scroll to where it says OREO in capital letters. if you want nougat, scroll to where it says NOUGAT.
NOUGAT
use the file that you downloaded if you selected nougat - it should be a zip. it will be called h910-10r. DO NOT, I REPEAT, DO NOT UNZIP THE FILE. place it on a pre formatted micro sd card. then, place the battery and sd card back in your phone. also, unplug the phone. then, hold down the volume down key and hold hold the power key. once you see the lg logo, release the power key and immediately hold the power key again. then, you should get a screen that asks if you want to reset your phone. use your volume keys to navigate and select yes, then again confirm it. then, after letting it reboot, it should go into twrp. once there, go to wipe\and select format data. then type yes to confirm. then, go back to the main screen and click wipe again. go ahead and click advanced and wipe your dalvik cache. once done, go to home screen and click install. select the select storage option down at the bottom and change to sd card. then find the h910 zip file and install it. then go ahead and reboot your phone, you will have a rooted android 7 rom. you will also have signal. then download supersu from the play store and open it to have root.
OREO
use the file that you downloaded if you selected oreo - it should be a zip. it will be called something along the lines of full stock oreo rooted. DO NOT, I REPEAT, DO NOT UNZIP THE FILE. place it on a pre formatted micro sd card. also, go to your root package folder and find the twrp image file and put that on your sd card. then go get the mk200 zip file and also place that on your sd card. then, place the battery and sd card back in your phone. also, unplug the phone. then, hold down the volume down key and hold hold the power key. once you see the lg logo, release the power key and immediately hold the power key again. then, you should get a screen that asks if you want to reset your phone. use your volume keys to navigate and select yes, then again confirm it. then, after letting it reboot, it should go into twrp. once there, go to wipe\and select format data. then type yes to confirm. then, go back to the main screen and click wipe again. go ahead and click advanced and wipe your dalvik cache. once done, go to home screen and click install. select the select storage option down at the bottom and change to sd card. then find the oreo full rooted zip and install it then, install the mk2000 file. after you have done this, click install image and select the twrp. the reason you need to re flash this is because that oreo file re installs the stock recovery. then install the twrp. now reboot your phone. you will have a rooted android 8 rom. you will also have signal. then download a magisk 6.0 manager apk from chrome browser to have root.
IF this worked and your enjoying root give me a thanks.
This is redundant to the existing h910 root guide, all you did was copy their work and re-post it
Sent from my LG-H910 using XDA Labs
cnjax said:
This is redundant to the existing h910 root guide, all you did was copy their work and re-post it
Sent from my LG-H910 using XDA Labs
Click to expand...
Click to collapse
Yes, that is why i gave them credit. However, It is more noob friendly and takes the time to explain what they are doing to their own phones as well as give them the option for nougat or oreo, something that none of the other guides have.
Ok, so I did it sucessfully, it's was still very complicated for me as some info is vague for a beginner. But after searching and retrying, and retrying, it worked. but go to runningnak3d post to get more info, and he wanted me to use sd card to root, but that did not work for me.. Your method worked for me. Thanks
the_R00ter said:
i am making this post because i have an lg v20 running 20h. there was no root guides available, so i decided to root mine using an older guide. it succeeded, but was very hard and time consuming....
Click to expand...
Click to collapse
your guide is good
+1 for for linking to the missing files from the old guide
+1 for mentioning me and @runningnak3d
you could break up the long paragraphs and bullet style the steps in order so it's easy to follow
theirs a video here of the steps and how the command windows should look > https://www.youtube.com/watch?v=jnRWnSHLGSc
this is where allot get confused in the guide.
I also don't remember you mentioning doing the battery pull after STEP1 when the phone sometimes hangs then run STEP2
I would also change the link to the H915 kdz to the android file host file in case LG changes it.
Their was a guy recently that could not get LGUP working you could make note that you may need the 32 bit VS 2010 > https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads
Any how, the guide is OK and the steps are not that bad, after a few tries most anyone can learn it.
clsA said:
your guide is good
+1 for for linking to the missing files from the old guide
+1 for mentioning me and @runningnak3d
you could break up the long paragraphs and bullet style the steps in order so it's easy to follow
theirs a video here of the steps and how the command windows should look > https://www.youtube.com/watch?v=jnRWnSHLGSc
this is where allot get confused in the guide.
I also don't remember you mentioning doing the battery pull after STEP1 when the phone sometimes hangs then run STEP2
I would also change the link to the H915 kdz to the android file host file in case LG changes it.
Their was a guy recently that could not get LGUP working you could make note that you may need the 32 bit VS 2010 > https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads
Any how, the guide is OK and the steps are not that bad, after a few tries most anyone can learn it.
Click to expand...
Click to collapse
alright, thank you so much for the advice! 1. i don't want to switch to bullets because when i was trying runningnak3d's guide, it seemed overwhelming. also people can comment on the step number that they were lost at. 2. i will change the kdz to something else if the file does change. i did in fact mention the battery pull step, if you ever need to find something in a page, hit control and f and then search the page.. i will add the 32 bit file. Thanks!
the_R00ter said:
i am making this post because i have an lg v20 running 20h. there was no root guides available
. . .
this guide would not have been possible without users runningnak3d and clsA
IF this worked and your enjoying root give me a thanks.
Click to expand...
Click to collapse
W O W . . .
What a way to rip-off runningnak3d's guide.
I mean, I can understand rewriting it... I did the same. But, just to parse it out for me to follow better.
But your statement "...there was no root guides available..." is just BS.
Below is my guide... for me to do the process.
Creation date on the text file was November 7, 2017. Just over a week after runningnak3d made the original post.
Difference is, I didn't feel the need to post someone else's work, in an attempt to try claiming credit for it, due to nothing more than a "rewrite".
What you meant to do is this: (FIFY)
Cool guide for rooting your LG V20. Works for 20h, too!
--------------------------------------------------------------------------------------------------------------------
Materials:
8+GB microSD Card - formatted exFAT or ext4
LG Up (patched)
C:\Program Files (x86)\LG Electronics\LGUP <- install here, or it won't read DLL correctly
ADB
DirtySanta root package - (No working Link)
H91510e_00_VTR_CA_OP_1205.kdz - http://lg-firmwares.com/downloads-file/4578/H91510e_00_VTR_CA_OP_1205.kdz
h910-10r.zip - https://drive.google.com/open?id=1S82HVNt2rAtXgBY499IBJnoCVFnpCf_X
- Check the SHA hash: 5451146030393e490dcfba3558b620badefe75cd
Terminal Emulator APK
Root Checker APK
Settings Database Editor APK
1) Copy h910-10r.zip, SuperSU-v2.82.ZIP, SuperSU.Pro.APK, Terminal Emulator, Root Checker, and Settings Database Editor to microSD Card and insert into phone.
2) Put phone into download mode (power off / hold vol. up & plug in USB cable)
Use LG UP to dump phone. When you run it, there will be additional radio buttons.
- Pick the one that says DUMP and click Start. You will be asked what partitions to dump, click the "select all" checkbox, and then you can uncheck "userdata".
3) When finished with the Dump, click the PARTITION DL radio button, pick the H915 v10e KDZ, and click start. Make sure all partitions are checked.
- Select H91510e_00_VTR_CA_OP_1205.kdz, Tick box to set as input file.
- Select all partitions
- Confirm all partition changes
- Once it is complete, phone will reboot into old Freedom Mobile ROM
- Disconnect USB Cable
- Complete Android setup, and you may not have signal (this is normal).
- Enable developer mode, and enable USB debugging.
- Enable Unknown Sources
- Connect USB Cable
- Make sure that your PC is authorized (tick always allow, and then OK).
4) Install Terminal Emulator for Android -- NOT Termux.
5) Extract root kit somewhere that you can run adb and fastboot from.
6) Open [2] Command Prompts in the directory containing ADB.EXE.
A) In first window, execute: adb logcat -s dirtysanta
B) In the secxond window, excute: STEP1.BAT
- Wait until prompt returns (several minutes)
C) Window 2: run-as con
D) Window 2: chmod 0777 /storage/emulated/0/*
E) Open Terminal Emulator on phone, enter: applypatch /system/bin/atd /storage/emulated/0/dirtysanta
- Watch window 1. Wait for "Finished. Please run Step 2 now."
F) Window 2: "exit"
- Window 2. "exit" again.
- STEP2.BAT (adb reboot bootloader)
- Phone now shows FASTBOOT MODE
G) STEP3.BAT
- This flashes TWRP and WW 2.0 kernal
- Phone will reboot on completion
7) If phone reboots to Android, in Window 2 execute: adb reboot recovery
- If phone is stuck at secure start-up, pull battery and boot into TWRP (same as factory reset)
8) In TWRP:
A) Settings: UN-Check Enable Screen timeout
B) Format Data (type "yes" to proceed)
C) Wipe Cache & Dalvic Cache
D) Install (flash) h910-10r.zip
E) Install (flash) SuperSU-v2.82.zip
F) Format Data
G) Reboot Phone
Problem Occured:
I seem to have a problem at running this, "run-as con chmod 0777 /storage/emulated/0/*" command.
the error i get is,
xelsa:/ $run-as con
chmod 0777 /storage/emulated/0/*run-as con
run-as: Package 'con' is unknown
Help?
SheMi363 said:
I seem to have a problem at running this, "run-as con chmod 0777 /storage/emulated/0/*" command.
the error i get is,
xelsa:/ $run-as con
chmod 0777 /storage/emulated/0/*run-as con
run-as: Package 'con' is unknown
Help?
Click to expand...
Click to collapse
This "run-as con chmod 0777 /storage/emulated/0/*" actually is a two commands:
- first type "run-as con" and press ENTER
- second type "chmod 0777 /storage/emulated/0/*" and press ENTER
Search in You Tube for "How to Root install TWRP for LG V20 H910 Edition!" from user NewTechBegins. This is very good video tutorial, step by step.
Hello, so nothing happens for me after I enter the code into terminal emulator, what am I missing?
After all these done I'm rebooted to secure start-up where I need to enter password. Tried my 4 digit VIN and didn't work. As suggested earlier in this thread I pulled battery and wipe everything and install Oreo_full_rooted.zip, mk2000, and TWRP 3.3.1-0. It boots up the same to the secure start-up.
I might have done differently in process.
1. H91510e_00_VTR_CA_OP_1205.kdz I downloaded did NOT match MD5 on its download page. Tried twice and it was the same. I went ahead and used it.
2. I ran into "adb server is out of date, killing.." message but was able to download an adbfix and somehow got through
3. STEP1.BAT and the rest of BAT were not accepted in Win10 powershell so I had to enter them by hand and it went smoothly with no error
4. I used twrp 3.3.1-0 as suggested in NewTechBegins' youtube clip
5. Phone boots into scramble messages like shattered warning sign before LG logo appeals. It will eventually enter twrp or secure start-up after some wait. Takes longer than it should, 5 minutes or so.
Wish to stay on Oreo but might try the 10R Rom if I have no other choice.
Please help.
(Secure start-up appeared the first time after step 3 where it was supposedly be a green screen and I can pull battery. It didn't. It went to secure start-up. I pulled battery anyways and rebooted into TWRP, I was asked to enter password again. After a few wrong attempts I was able to bypass it and enter TWRP to proceed with install)
edit: Eventually succeed by not installing TWRP after flashing OREO and MK2000. Rebooted into Secured Start-up again, pull battery and rebooted into FACTORY Recovery and deleted all user data from there. Rebooted and Android setup began.
Note: BE SURE TO FORMAT DATA AGAIN in TWRP after flashing OREO and MK2000 to have a clean start. Would be nice if it was mentioned in this tutorial.
the_R00ter said:
i am making this post because i have an lg v20 running 20h. there was no root guides available, so i decided to root mine using an older guide. it succeeded, but was very hard and time consuming. Being a noob at the time, i was also extremely nervous that i could possibly brick my phone or screw something up. i didn't, and no part of this should brick yours either. ***However - if you do somehow break your device in any way, that is on you. by completing these steps, you assume full responsibility. now that we have that out of the way, lets continue. at the end of this guide, you should have a rooted device with your choice of os (7 or 8 - or even a custom rom if you choose!). you should also have twrp. this guide would not have been possible without users runningnak3d and clsA
**** Also, during this Proccess, Your Phone WILL be wiped clean!!! don't forget to back up photos, videos, etc...*****
don't download any other files than from this guide.
1. download these files (required) https://lg-firmwares.com/downloads-file/4578/H91510e_00_VTR_CA_OP_1205.kdz (for a rootable os that we can flash, - get this also (required) https://forum.xda-developers.com/v20/how-to/guide-patch-lgup-to-unlock-features-t3652222 this program is called lg up and has been patched to work with this phone. you will also need this. https://androidfilehost.com/?fid=1322778262903990218. these are the root files and need to be all in the same folder as where lg up is installed. you will also need to have access to fastboot and need to have adb installed. that is pretty easy, give it a google search if you still need help.
if you are running 32 bit, get this https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads
this is the OS. get nougat, which has like three less steps (you can't upgrade to oreo on this os once rooted) or scroll down and get the oreo file. nougat (really old version) https://drive.google.com/file/d/1S82HVNt2rAtXgBY499IBJnoCVFnpCf_X/view
Oreo - get this first file, and the ones under it. https://www.androidfilehost.com/?fid=1322778262904015326
***https://androidfilehost.com/?w=files&flid=283977*** You have to have this file if getting oreo. if you chose nougat, then don't get this.
2. Now that you have everything downloaded and installed, put your phone into download mode. (power it off, hold the volume down button and plug in a usb c cable attached to your pc. don't stop holding volume down until you see download mode.)
3. once it is in download mode, open up lg up. select your device, (it should be in standby mode, according to lg up) and click dump (this is a total backup of the phone, you are lucky you know this right now, I didn't when i rooted mine) . it will bring up a file explorer, select where you want it to save to. (I chose my desktop). once you have a folder selected., it will bring up a bunch of options for partitions. click select all and uncheck user data. ****Make SURE that you don't unplug your phone during any part of this process or any other process in this guide, it will permanently brick it. ***** ow that you have selected everything but userdata, click start.
4. once that finishes, you will have made a full backup of your phone in case something goes wrong.
then click the partition DL button and select the h915 v10e kdz file (the file that i said was the rootable os we can flash) (the first file you downloaded). make sure bin file stays checked. then click start. once that finishes, your phone should automatically reboot into an old nougat operating system. then go to settings, enable developer options, and turn on usb debugging. that is easy, if you can't figure it out, google is your friend. now you should have no cellular signal. this is not the permanent ROM.
5. go to the play store and download terminal emulator for android. (once usb debugging has been enabled
then go ahead and go to the folder where you extracted the root files/package. hold shift and right click to open a command windows there or powershell, whatever your pc says. open 2 of those windows. then, in the first one, type, adb logcat -s dirtysanta
****don't close this window.*****
then in the other window, type STEP1.BAT
*****don't close this window.***** It may take a minute, but after a while it will let you type again. once you can, type run-as con
chmod 0777 /storage/emulated/0/*
6. then, pull up the window you used the logcat command in. leave it there so you can watch it
then, on your phone, go to the terminal emulator and type applypatch /system/bin/atd /storage/emulated/0/dirtysanta
once you do that, glance at the logcat window. once it says to run step 2, go to the window where you typed step1.bat. type STEP2.BAT
at this point, your phone should go ahead and reboot and say fastboot mode up at the top. now, go to your window where you typed all the .bats and type STEP3.BAT. wait until your phone reboots and you will see a screen saying that you can;'t use your phone. this is bogus, just ignore it and wait like 10-15 seconds for it to get past that screen. then it will boot that android and you should get a green screen.
Now, quickly, pull the battery from your phone. leave it out for a little while while we prepare the next steps.
If you want oreo, scroll to where it says OREO in capital letters. if you want nougat, scroll to where it says NOUGAT.
NOUGAT
use the file that you downloaded if you selected nougat - it should be a zip. it will be called h910-10r. DO NOT, I REPEAT, DO NOT UNZIP THE FILE. place it on a pre formatted micro sd card. then, place the battery and sd card back in your phone. also, unplug the phone. then, hold down the volume down key and hold hold the power key. once you see the lg logo, release the power key and immediately hold the power key again. then, you should get a screen that asks if you want to reset your phone. use your volume keys to navigate and select yes, then again confirm it. then, after letting it reboot, it should go into twrp. once there, go to wipe\and select format data. then type yes to confirm. then, go back to the main screen and click wipe again. go ahead and click advanced and wipe your dalvik cache. once done, go to home screen and click install. select the select storage option down at the bottom and change to sd card. then find the h910 zip file and install it. then go ahead and reboot your phone, you will have a rooted android 7 rom. you will also have signal. then download supersu from the play store and open it to have root.
OREO
use the file that you downloaded if you selected oreo - it should be a zip. it will be called something along the lines of full stock oreo rooted. DO NOT, I REPEAT, DO NOT UNZIP THE FILE. place it on a pre formatted micro sd card. also, go to your root package folder and find the twrp image file and put that on your sd card. then go get the mk200 zip file and also place that on your sd card. then, place the battery and sd card back in your phone. also, unplug the phone. then, hold down the volume down key and hold hold the power key. once you see the lg logo, release the power key and immediately hold the power key again. then, you should get a screen that asks if you want to reset your phone. use your volume keys to navigate and select yes, then again confirm it. then, after letting it reboot, it should go into twrp. once there, go to wipe\and select format data. then type yes to confirm. then, go back to the main screen and click wipe again. go ahead and click advanced and wipe your dalvik cache. once done, go to home screen and click install. select the select storage option down at the bottom and change to sd card. then find the oreo full rooted zip and install it then, install the mk2000 file. after you have done this, click install image and select the twrp. the reason you need to re flash this is because that oreo file re installs the stock recovery. then install the twrp. now reboot your phone. you will have a rooted android 8 rom. you will also have signal. then download a magisk 6.0 manager apk from chrome browser to have root.
IF this worked and your enjoying root give me a thanks.
Click to expand...
Click to collapse
hey reply to me fast is it ok to flash h915 firmware in my h910 10I cuz already hard bricked the previous h918 motherboard cuz I don't know I accidentally flashed h990 firmware plz tell me also is it necessary to flash h915 in h910 to root and TWRP.
Isn't that what it says in the OP?
pakwarrior said:
hey reply to me fast is it ok to flash h915 firmware in my h910 10I ....
Click to expand...
Click to collapse
MaverickNextDoor said:
Isn't that what it says in the OP?
Click to expand...
Click to collapse
Dont try to install h915 instead just try dirty santa method which will install temporary twrp recovery there install h910 20h pre rooted 8.0 rom and install mk2000 v2.2 kernel and install newer version of twrp and you are good to go
No bricking risk and nothing dont try to do corss flashing of h915 its not that accurate also there is model issue in crossflashing instead doing that do dirsty santa and install h910 20h simple
pakwarrior said:
Dont try to install h915 instead just try dirty santa method which will install temporary twrp recovery there install h910 20h pre rooted 8.0 rom and install mk2000 v2.2 kernel and install newer version of twrp and you are good to go
No bricking risk and nothing dont try to do corss flashing of h915 its not that accurate also there is model issue in crossflashing instead doing that do dirsty santa and install h910 20h simple
Click to expand...
Click to collapse
So how do you use dirty santa method for h910 20h? All the guides I've seen want you to crossflash.
jxsilicon9 said:
So how do you use dirty santa method for h910 20h? All the guides I've seen want you to crossflash.
Click to expand...
Click to collapse
I didn't do crossflashing i first installed twrp throught dirty santa which then you have to open from recovery then there is android 8.0 h910 stock rom pre rooted i used or you can use your custom rom to flash then there is an kernel mk2000 file also to flash from twrp after you installed new rom for fixing errors like static screen and like that thats it also if you flash android 8.0 stock of h910 rom you will get a password during booting process just attempt it wrongs for many trys wrotten on it until you see wipe the data prompt and you will factory reset your phone and its ready to go maybe you will be promoted to twrp so you have to factory reset through wipe option ok and you are good to go one thing do it only on h910 not other model there is 0% chance of hard bricking your phone if you did this and no signal problem
Also to understand more go a see my qna with author of this post in this post obviously ok or if you meed more help reply me i will text you
pakwarrior said:
I didn't do crossflashing i first installed twrp throught dirty santa which then you have to open from recovery then there is android 8.0 h910 stock rom pre rooted i used or you can use your custom rom to flash then there is an kernel mk2000 file also to flash from twrp after you installed new rom for fixing errors like static screen and like that thats it also if you flash android 8.0 stock of h910 rom you will get a password during booting process just attempt it wrongs for many trys wrotten on it until you see wipe the data prompt and you will factory reset your phone and its ready to go maybe you will be promoted to twrp so you have to factory reset through wipe option ok and you are good to go one thing do it only on h910 not other model there is 0% chance of hard bricking your phone if you did this and no signal problem
Also to understand more go a see my qna with author of this post in this post obviously ok or if you meed more help reply me i will text you
Click to expand...
Click to collapse
Ok,you know where to get the latest firmware and files? Most dirtysanta tutorials bat have the downgrade added. How do I just add the twrp without the downgrade? Any dirtysanta bat and files?
jxsilicon9 said:
Ok,you know where to get the latest firmware and files? Most dirtysanta tutorials bat have the downgrade added. How do I just add the twrp without the downgrade? Any dirtysanta bat and files?
Click to expand...
Click to collapse
no no need to downgrade anything just find any video which says TWRP installation for LG v20 h910 dirty Santa and flash it but wait I seen in all zip files of dirty Santa there will a final step in that folder called step 3 that file is a batch file just open it in notepad and you will see there is written TWRP for I think us995 just rename it all of them to that name which TWRP in that folder ok for example if the name of the TWRP in dirty Santa folder is twrph910.img
you have to rewrite the same and exact name with .img in that batch file this ting will not tell any YouTuber or in the website cuz, I find it in curiosity and founded that the TWRP name was wrong so I just renamed it in that batch file and it worked before it it wasn't working also download the exact LG v20 h910 TWRP, not any other model TWRP or you will hard brick it man it feels so bad I one time hard bricked my LG next day I bought the device now I just sold it I change the mobo to LG h910 then I did all that root things and then I sell that phone no I have sony xz3 which is way better and have snapdragon 845 octa-core which is the thing I needed in just 135$ I found that it was japan model refurbished but has all things new and original like poled panel and stuff... well if you need more help just don't reply m on XDA you will not get the answer quickly here my social media account
discord: PAKWARRIOR#6115
Facebook: https://www.facebook.com/hafiz.saad.712161/
Instagram: https://www.instagram.com/zero_saad_sixs/
reply me on that I am online all the time but not online on XDA all the time ok
Installed twrp no problem. Had installation issues (error 7) and edited the file. Tried it again and came up with error 1. Saw someone else on xda say to extract the boot img and mount to the recovery partition successfully. Welp, I guess I wasn't so lucky. I can not get into twrp recovery or any recovery and my v20 (910) boots into the Lg android splash screen. My desktop can not see any adb device but it registers a device being plugged in. What's the verdict, soft or hard bricked? Everything was cleared besides twrp prior to error 7 and 1.
Lgv20usr said:
Installed twrp no problem. Had installation issues (error 7) and edited the file. Tried it again and came up with error 1. Saw someone else on xda say to extract the boot img and mount to the recovery partition successfully. Welp, I guess I wasn't so lucky. I can not get into twrp recovery or any recovery and my v20 (910) boots into the Lg android splash screen. My desktop can not see any adb device but it registers a device being plugged in. What's the verdict, soft or hard bricked? Everything was cleared besides twrp prior to error 7 and 1.
Click to expand...
Click to collapse
Re-flash the H91510e_00_VTR_CA_OP_1205.kdz with LG UP. And again.
Code:
Your warranty is now void.
If you root your device, Your KNOX status will be tripped.
You can still pass the safety net after you root if you follow the instructions.
I am not responsible for bricked devices, dead SD cards although it is not really possible
Please do some research if you have any concerns about doing this to your device
How to flash official firmware? (not the root and unlock bootloader part!)
You will need:
A Galaxy A22 5G and common sense
Samsung Odin (the flashing tool of the official firmware)
https://dl2018.sammobile.com/Odin3-v3.14.1.zip
You need to extract the zip file and you are going to use the file Odin3_v3.14.1.exe inside the folder.
Samsung Android USB Driver for Windows
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
Double-click and install the exe file.
Samsung Official Firmware
Release 1.0.3 · zacharee/SamloaderKotlin
Contribute to zacharee/SamloaderKotlin development by creating an account on GitHub.
github.com
Download the platform you want to download to. (Windows)
You need to extract the zip and double click open the file Bifrost.exe inside the folder.
You need to fill in the Model, Region, press the Check for Updates button and the Download button.
How to find the Model: on your phone → Settings → About Phone → The third row says the Model number and you need to remove the part with the part of /xx, for example, SM-A226B/DS and you only need to type SM-A226B
How to find the Region: You can check the Region at this link https://samfrew.com/model/SM-S908B/
You need to find find a three-letter word depending on your carrier and country and type it in Bifrost, for example, EVR
Press the Check for Update button and download it with the Download button.
Put it to a place you can easily find, ie. Desktop.
After downloading it, find the file SM-xxxxx_x_xxxxxxxx_xxx.zip.enc4 on the place you put it and change the document format from .enc4 to .zip. Then, double click and extract the file.
Open Odin3_v3.14.1.exe and turn off your phone. Connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone. When you arrived at Download Mode press volume up. Go back to Odin3_v3.14.1.exe:
-Click on BL and select BL_xxxxxxxxxx.tar.md5
-Click on AP and select AP_xxxxxxxxxxx.tar.md5
-Click on CP and select CP_xxxxxxxxxx.tar.md5
(If you want to keep your data don't flash CSC).
-Click on CSC and select CSC_OMC_xxxxxxxxxx.tar.md5
-Click on USERDATA and select HOME_CSC_OMC_xxxxxxxxxx.tar.md5
Press Start to flash the firmware, after done, your device will automatically reboot to the system.
How to unlock the bootloader?
Go to your phone → Settings → About Phone → Software information → Press Build number 6 times until you see the notice “You’re now a developer”
Go in Settings → Developer options → enable OEM unlocking
Power off your phone first. Then, connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone.
When you arrived at Download Mode, long press volume up until you see the black screen. Confirm to unlock the bootloader and you will erase your device.
How to root your phone?
After you unlock your bootloader, you set up your phone and make sure you do not sign in google account first. Install Magisk https://github.com/topjohnwu/Magisk/releases/download/v24.1/Magisk-v24.1.apk on your phone. Oh yes, in case you do not know, you need to allow the app to install apps so that you can install the apk.
Transfer AP_xxxxxxxxxx.tar.md5 in the firmware you download from your PC/Laptop to your phone.
Open Magisk on your phone and press the install button in the Magisk column. Select 'Select and Patch a File', 'Let's Go' and find the AP_xxxxxxxxxx.tar.md5 and select it. You can have a cup of coffee if you like when you waiting for the patching of the file.
After finishing the patching, you need to transfer the file magisk_patched-24xxx_xxxxx.tar in the Downloads folder back to your PC/Laptop.
Turn off your phone. Connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone. When you arrived at Download Mode press volume up. Open Odin3_v3.14.1.exe on your PC/Laptop:
Click on BL and select BL_xxxxxxxxxx.tar.md5
-Click on AP and select magisk_patched-24xxx_xxxxx.tar
-Click on CP and select CP_xxxxxxxxxx.tar.md5
(If you want to keep your data don't flash CSC).
-Click on CSC and select CSC_OMC_xxxxxxxxxx.tar.md5
-Click on USERDATA and select HOME_CSC_OMC_xxxxxxxxxx.tar.md5
When it finishes flashing it, it will automatically reboot and you can gain root access.
Optional: If you want to have the safety net passed (most of the banking apps use it), then you need to install the zip
as a Magisk module in Magisk https://github.com/kdrag0n/safetynet-fix/releases
How? Go to Magisk → Modules → install from storage and select the zip you downloaded.
Or you could just get your AP file and extract your boot.img.lz4 (use lz4 from github), put it on your phone and patch it with Magisk, then flash the VBMeta that this thread has in Odin, reboot and erase the cache and data in the stock recovery, rebooting to download mode again and flashing your magisk patched boot img in a tar file.
Platypus Enthusiast said:
Or you could just get your AP file and extract your boot.img.lz4 (use lz4 from github), put it on your phone and patch it with Magisk, then flash the VBMeta that this thread has in Odin, reboot and erase the cache and data in the stock recovery, rebooting to download mode again and flashing your magisk patched boot img in a tar file.
Click to expand...
Click to collapse
I agree with you. You can also use this way. However, using Magisk does all the jobs makes life easier and I am a bit lazy
Hi! I'm new into rooting and I just wanted to know, What's the risk of bricking when using magisk? I've rooted an old phone successfully via TWRP tho this way seems a bit more direct, and can I choose any region during the official firmware download?
MateoElias said:
Hi! I'm new into rooting and I just wanted to know, What's the risk of bricking when using magisk? I've rooted an old phone successfully via TWRP tho this way seems a bit more direct, and can I choose any region during the official firmware download?
Click to expand...
Click to collapse
The worst that would happen is a bootloop, which you can easily fix with a factory reset (not a good solution, but at least it works). The only dangerous part is installing the wrong TWRP version or a failed Odin flash, but no bricks. Odin mode will almost always work. Just make sure you have a charger in good condition.
As for picking regions, I'd just pick the phone's original region, if I were you. I'm not actually sure if region is tied to the device itself but better safe than sorry.
Greetings...
To check your Buld Number or Build Version, before you proceed doing any stuffs, type on the phone keypad this >>> *#1234#* and it will show on your device screen
Just tried to follow the guide, but I'm getting an error while flashing:
Custom binary blocked by OEM Lock: vbmeta
Firmware used:
A226BXXU4AVB1_A226BOXM4AVB1_NEE
Patched AP with Magisk 24.3.
Edit: NVM, LONG press volume up...
tried to follow the guide my A22 is rooted. But i have problem.
no application recognizes the root. I installed root checker and he says my phone is rooted but superuser binary files it not installed
Any one can help please?
Alpa475 said:
tried to follow the guide my A22 is rooted. But i have problem.
no application recognizes the root. I installed root checker and he says my phone is rooted but superuser binary files it not installed
Any one can help please?
Click to expand...
Click to collapse
I suppose you may have installed to sbin, but I am not really sure
Can you update the link to the Magisk release?
Leonardo Green said:
You can root Galaxy A22 and A22 5G in TWRP.
Click to expand...
Click to collapse
I am not familiar with the A22 series, but I will say this: I'm rather wary of questionable root solutions, especially those that aren't open source. This is why I personally prefer Magisk - it is completely open source, so anyone who would like to examine the code can do so.
Sorry, when i See this tutorial, my phone has updated to android 13. Could this step possible to do now with this android version?
Very much thank you for the information!
have successfully run the tutorial above. even already using GSI rom android 13 from pixelExperience. but the network you get is stuck on 4G. are there any tools or tutorials to restore the 5g network.
Williamtung said:
Code:
Your warranty is now void.
If you root your device, Your KNOX status will be tripped.
You can still pass the safety net after you root if you follow the instructions.
I am not responsible for bricked devices, dead SD cards although it is not really possible
Please do some research if you have any concerns about doing this to your device
How to flash official firmware? (not the root and unlock bootloader part!)
You will need:
A Galaxy A22 5G and common sense
Samsung Odin (the flashing tool of the official firmware)
https://dl2018.sammobile.com/Odin3-v3.14.1.zip
You need to extract the zip file and you are going to use the file Odin3_v3.14.1.exe inside the folder.
Samsung Android USB Driver for Windows
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
Double-click and install the exe file.
Samsung Official Firmware
Release 1.0.3 · zacharee/SamloaderKotlin
Contribute to zacharee/SamloaderKotlin development by creating an account on GitHub.
github.com
Download the platform you want to download to. (Windows)
You need to extract the zip and double click open the file Bifrost.exe inside the folder.
You need to fill in the Model, Region, press the Check for Updates button and the Download button.
How to find the Model: on your phone → Settings → About Phone → The third row says the Model number and you need to remove the part with the part of /xx, for example, SM-A226B/DS and you only need to type SM-A226B
How to find the Region: You can check the Region at this link https://samfrew.com/model/SM-S908B/
You need to find find a three-letter word depending on your carrier and country and type it in Bifrost, for example, EVR
Press the Check for Update button and download it with the Download button.
Put it to a place you can easily find, ie. Desktop.
After downloading it, find the file SM-xxxxx_x_xxxxxxxx_xxx.zip.enc4 on the place you put it and change the document format from .enc4 to .zip. Then, double click and extract the file.
Open Odin3_v3.14.1.exe and turn off your phone. Connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone. When you arrived at Download Mode press volume up. Go back to Odin3_v3.14.1.exe:
-Click on BL and select BL_xxxxxxxxxx.tar.md5
-Click on AP and select AP_xxxxxxxxxxx.tar.md5
-Click on CP and select CP_xxxxxxxxxx.tar.md5
(If you want to keep your data don't flash CSC).
-Click on CSC and select CSC_OMC_xxxxxxxxxx.tar.md5
-Click on USERDATA and select HOME_CSC_OMC_xxxxxxxxxx.tar.md5
Press Start to flash the firmware, after done, your device will automatically reboot to the system.
How to unlock the bootloader?
Go to your phone → Settings → About Phone → Software information → Press Build number 6 times until you see the notice “You’re now a developer”
Go in Settings → Developer options → enable OEM unlocking
Power off your phone first. Then, connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone.
When you arrived at Download Mode, long press volume up until you see the black screen. Confirm to unlock the bootloader and you will erase your device.
How to root your phone?
After you unlock your bootloader, you set up your phone and make sure you do not sign in google account first. Install Magisk https://github.com/topjohnwu/Magisk/releases/download/v24.1/Magisk-v24.1.apk on your phone. Oh yes, in case you do not know, you need to allow the app to install apps so that you can install the apk.
Transfer AP_xxxxxxxxxx.tar.md5 in the firmware you download from your PC/Laptop to your phone.
Open Magisk on your phone and press the install button in the Magisk column. Select 'Select and Patch a File', 'Let's Go' and find the AP_xxxxxxxxxx.tar.md5 and select it. You can have a cup of coffee if you like when you waiting for the patching of the file.
After finishing the patching, you need to transfer the file magisk_patched-24xxx_xxxxx.tar in the Downloads folder back to your PC/Laptop.
Turn off your phone. Connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone. When you arrived at Download Mode press volume up. Open Odin3_v3.14.1.exe on your PC/Laptop:
Click on BL and select BL_xxxxxxxxxx.tar.md5
-Click on AP and select magisk_patched-24xxx_xxxxx.tar
-Click on CP and select CP_xxxxxxxxxx.tar.md5
(If you want to keep your data don't flash CSC).
-Click on CSC and select CSC_OMC_xxxxxxxxxx.tar.md5
-Click on USERDATA and select HOME_CSC_OMC_xxxxxxxxxx.tar.md5
When it finishes flashing it, it will automatically reboot and you can gain root access.
Optional: If you want to have the safety net passed (most of the banking apps use it), then you need to install the zip
as a Magisk module in Magisk https://github.com/kdrag0n/safetynet-fix/releases
How? Go to Magisk → Modules → install from storage and select the zip you downloaded.
Click to expand...
Click to collapse
Hi, Thanks for sharing this but unfortunately my camera is not working after doing all this. Please suggest what should i do
Praveenbha said:
Hi, Thanks for sharing this but unfortunately my camera is not working after doing all this. Please suggest what should i do
Click to expand...
Click to collapse
Have you tried Universal Safetynet fix? https://github.com/kdrag0n/safetynet-fix
I rooted the phone according to your guide
But after everything I can't connect to the internet
Youtube, system update doesn't work
MAGISK itself was able to update without any problem
Chrome will turn on pages, but without images and displays error about unsecured connection
New to this community I hope this post is welcome here. Thanks to many of you I got a successful first time root and thought I would make a decent guide for others that stumble across this eventually.
This guide is for Windows only. I'm sure it would work similarly on Linux, but this is specific to Windows.
I AM NOT RESPONSABLE FOR ANY DAMAGE OR BRICKED DEVICE. That is always a risk you take with rooting, altering any software/firmware. This method did work for me, and if followed correctly it should work for you. Make sure you are using the same device this guide is for. That all being said, if anything goes wrong, this device is very easy to fix bootloops, soft bricks etc. Carry on.
YOU WILL LOSE ALL YOUR DATA AND YOUR TABLET WILL BE RESET TO FACTORY DEFAULT!! BACKUP ANYTHING YOU DONT WANT TO LOSE BEFORE STARTING THIS ROOT.
YOU WILL NEED A COMPUTER. This is NOT a hardware only root, in this guide, again, we will be using Windows 10.
Before starting anything, this will be the software list you need to download and install before moving forward...
The latest release of Magisk: GitHub - topjohnwu/Magisk: The Magic Mask for Android v.25.2 was the latest release at the time of this post, it might be updated when you are reading this. It should still work the same.
Odin: https://forum.xda-developers.com/attachments/odin3-v3-14-1-zip.5158505/ this should be a direct download link. If you dont like that, here is a link to the XDA fourm itself, make sure to download the Odin3 3.14.1.zip, ( 3.13.1.zip is not a link, reddit just highlights it because of the .zip, you just need to scroll down and find it in the forum, should be 1st or second in the list) NOT THE PATCHED VERSION.
The Firmware for your device (SM-X200) This is where I got mine, mind you it's the USA version: https://samfw.com/firmware/SM-X200/XAR/X200XXU1AVC1 If you are out of the states, there is many other sources for your exact firmware version, just type the second half of your build number (starting with "X200...etc.' into the browser followed by firmware then "download". The build number can be found in the software information inside of the "About tablet" section at the bottom of your settings.
The Samsung USB drivers: Samsung Android USB Driver | Samsung Developers You will need these to ensure a proper connection between your PC and tablet
And finally, this is optional, this already patched boot.img file already converted to .tar: https://drive.google.com/file/d/1Rm4BPaIVXWClhjKFencRnheJlDB3RRVm/view This is a working boot file, at least for me and many others on XDA, feel free to make your own if you wish, it will be explained in the guide below.
P.S Using the boot file above will save you some time and may help you avoid errors or crashes inside of odin or on your tablet. Also, better for those not as experienced.
The Guide now starts below.
Enable Dev options. (This is done by going into the "About Tablet" section at the very bottom of your settings, clicking "Software information", then clicking build number multiple times until a prompt shows up saying you are now a developer, or have unlocked dev settings.)
Enable OEM unlock inside of Developer settings.
Power off device, then hold both volume up and down buttons and plug your tablet into your PC to boot into download menu
Hold volume up once in download menu, to start OEM unlock prosses
When unlocked, the device with automatically factory reset
Set up device, Enable Wi-Fi either during or after setup prosses.
Re-Enable dev settings (as we did in step #1), and make sure "Enable OEM unlock" Is on and or grayed out.
Download latest firmware for your device and extract it using 7zip, (Link for firmware is at the begining of this guide) there should now be a list of 4 files starting with BL_, AP_, CSC_OMC, and HOME_CSC. (We won't be using HOME_CSC, more on that later).
Using Odin, install the AP BL and CSC . In the BL slot, click the BL, then go to the extracted firmware from earlier and select the file the file that starts with "BL_X200". Then give it a second to load in, move to the AP section. Click AP, then select the file from the extracted file again, that starts with "AP". And for CSC, select the file "CSC_OMC..." Not the "CSC_HOME..." After all the files are in the correct slots, click Start at the bottom of the Odin3 application.
Once odin is finished, you need to boot back into stock OS by holding down volume and power button to get out of download menu, if prompted to push power button during boot, do so.
Go through the setup again, enable Wi-Fi and check and make sure OEM unlock is still grayed out and enabled.
Download Magisk From there official GitHub on to your tablet (Link above)
Install Magisk
IMPORTANT!!
This is where you have two options, either skip these steps, and use the provided boot.img file, or make your own (this is harder, you may run into errors and issues, but most of you have been doing this much longer than me, this is just a guide from someone new to this, so I thought my incite may be easier to understand) SKIP STEPS #14-#21 if you chose to download the provided boot.tar file at the beginning of this guide. (I would recommend reading them still, because understanding the prosses will help with a successful root, whether or not you choose to make your own boot.img file, this advice is from experience. Knowledge is power, right?
14. If you choose to make your own patched boot file with magisk, go back to your PC, extract the "AP_X200..." file inside of the firmware file you already extracted, send that file to your Tab A8 (again this is for the SM-X200 ONLY!) via plugging your tablet into your laptop (MAKE SURE ITS POWERED ON AND UNLOCKED)
14.5. You will be prompted to allow data transfer between your tablet and the PC something like " allow this PC to access...etc". Allow it. Open your tablets root storage from the file manager on your windows computer. This PC, then select your tablet. You should see the root files.
15. Return back to the folder of the extracted AP_X200... file you extracted previously; it should be in a standard file format now, not a .tar file
16. Find the "Boot.img" file, copy it and return to your tablets root file
17. Paste the boot.img file you copied from the extracted AP_X200... file, into the root directory of your tablet. Then unplug your tablet and return to your tablet for the next step.
18. Open magisk, click install on the top option, to the right of "Magisk" NOT THE ONE THAT SAYS "App". Then click "Select and patch file" find your "boot.img" file you previously copied over to your tablet in step #16/#17, its often in recent files, but should always be in the tab "Galaxy tab A8" You can find that tab by tapping the hamburger icon (three horizontal lines) in the top left corner. Once there, select the "boot.img" file.
19. Once you find your file, click "Let's go" back in the main Magisk screen
20. Once completed, it should show that it installed the patched boot.img file in your tablets download directory. You have now successfully patched the boot file. If you get an error or a crash, try again. If you keep running into errors, make sure your file is the correct "boot.img" file. Don't be shy, re-read the guide, start over, if necessary, we haven't gone too far yet to try again.
21. Plug your tablet back into your PC, go back to your tablets root directory via your computers file manager, open whichever file Magisk installed its patched "boot.img" file (it should be in the downloads folder of your tablets root directory) copy it to your computer. You can move it anywhere but if you move it back to where the other firmware files that we downloaded and extracted are, you will need to right click the file, hover over 7zip, then click "Add to archive". Then, in the section of the options where it says "archive format" change the file type to tar. You will need to do this step either way, but make sure it's done BEFORE moving it to the other files we extracted earlier, because it will prompt you to replace the file, we don't want to do that.
22. Now take your tablet, unplug it if it's still plugged in, and power off. Once it's powered down completely, hold both the volume up and down buttons like earlier to get into download mode when unlocking the OEM, and plug it into the PC (WHILE STILL HOLDING THE VOLUME BUTTONS UNTIL THE MENU APPEARS). Once the download menu appears, (should be familiar by now) click once on the up-volume button, and you will now be ready to download your files to root your device! Yayy!
23. Open Odin3, and it should have on the left a, "Log" info box, "<ID: somthing/somthing> Added! ("something/something will be numbers, just make sure it says added, that means it sees your Tablet is in download mode and ready for your patched files"
24. You will see 4 slots to the right of the Log page inside of Odin. They will read (top to bottom) "BL", "AP", "CP", "CSC, and "USER DATA". Only BL, AP, and CSC will be used in this prosses, and should be the only ones with check marks to the left of them. If the check marks are not checked, check them.
25. Now, (don't worry almost done!) In the BL slot, click the BL box, go to the extracted firmware from earlier (Step 8) and select the file the file that starts with "BL_X200". Then give it a second to load in, move to the AP section. Select it, then find your boot.img file you made using magisk, or downloaded via the link at the top of this post. Select it, and now move on to CSC. Click it, find your "CSC_OMC" file (you might get away with using the CSC_HOME..." file, but at this point your tablet shouldn't have anything you want to save, as it should have been wiped when unlocking the bootloader, so just take my advice and use the stock CSC_OMC file.
26. Now, you should have files in the BL slot, the AP slot, and the CSC slot. Double check and make sure there are nothing in the "CP" slot, nor the "USERDATA" slot. Once you are ready, and all files are in the correct slots, and your tablet is ready to start downloading, (should have an empty progress bar under the "cancel" instructions on your tablet screen) go ahead and click " Start" at the bottom of the Odin application.
27. This prosses should be relatively quick, less than a minute, but in my many tries, sometimes it was quick, other times it took a minute or two. Once done, the Odin app on your PC should read "Pass" in a green box towards the top right corner of the app, under the Odin logo.
28. Proceed to shut down the device, by holding down on the Power and Volume Down keys, once the screen goes black, lift off the power AND volume down key, and immediately press down on the Power key (again) and the Volume UP this time. (Some guides have said it's not necessary to release from the power key when the black screen starts, and to only change from the volume down key to the volume up key, but in my experience, this may lead to a bootloop *Don't worry, it's fixable*. So, I recommend you lift off both and then immediately start clicking the power *again* and volume up) This should bring you into the system recovery menu. Use the volume down key to scroll down, and the volume up key for up, the power button is to select the option in the menu. Scroll down to "Wipe data/factory reset" and select it. Confirm when prompted, and it will reset your device using the firmware you just installed.
29. Setup as usual, enable the Wi-Fi, double check that OEM unlock is still enabled and grayed out in the developer menu (you will have to re enable the dev menu). Then go to Chrome, type in "Root checker apk" and download the apk, should be available in the first or second result of Google. MAKE sure to allow Chrome downloads, it will prompt you when the apk is downloaded. Open it, and check for Root. This is when I got a pop-up from Magisk, but it may happen at any time. Whenever it happens, just follow its instructions, it will reboot your tablet, then when it's powered back on, go back to root checker. When you check for root, wait a couple seconds, a pop up should show up with a count down, allow it, and it will show that you...are now...ROOTED!
YAY, you did it congratulations. This took me probably 12 hours and many different forums, because there has been a great debate on how to do this properly, but from what I've experienced this is all the right info and guides shoved into one. Many thanks to the XDA forums, and especially user "tofor" on the XDA forums, for the patched boot file when people where still having issues making their own.
I may make a YouTube video explaining all this, but I'm not super into the idea. We will see, depends how this post does and if people still need help. Again, I'm not a pro when it comes to rooting. I'm a nerd, I know my way around tech, but I was an iPhone kid, so I grew up with jailbreaking, which was 100% easier cause most the work was done for you. That all being said, I'm sure I missed some terms, or dint explain something perfectly, so please, to all of you who are much more experienced with this, FEEL FREE TO CORRECT ME!! Have any questions, I'll try to get to them, but I'm not super active. If I don't get to you, I'm sure somebody will. I really hope this helps; this was hell for me.
Great job on the guide! Worked perfectly for me on the 1st try!
Thanks for the guide, also there is TWRP out there now for this tablet
[RECOVERY][UNOFFICIAL] TWRP 3.7.0 for 2021 Galaxy Tab A8 10.5 [SM-X200]
Notes: What's posted below is a work in progress, but it should suffice to unblock efforts to build custom ROMs for this impressive tablet. This is unofficial and unsupported, so the usual caveats apply. Since we don't flash the bootloader, you...
forum.xda-developers.com
On step 25 for "Then give it a second to load in, move to the AP section. Select it, then find your boot.img" when I try to add the boot.img in the AP section it does not show the boot.img for me to select like it does with the other files.
Edit: I found out I needed to select the .tar and not extract and select the boot.img
Edit: Rooted doing what I need now! Thank you for such an awesome tutorial!
Sorry new to rooting here, for Step 8 do I need to go to the blue download screen for Odin to work? My odin is stuck on setupconnection
I only want to change the ''tap'' sounds when the display is touched. Do I really need to do all of this (root access) or is there an easier way to do that? This seems like a lot of work and I use this tablet regularly.
Hello and Thank you for your work.
Do you think your guide works for android 12? knowing that I found my version on samfw.com, namely the X200XXU1BVI6 version (CSC European Union). Thank you.
SerielRipou said:
Hello and Thank you for your work.
Do you think your guide works for android 12? knowing that I found my version on samfw.com, namely the X200XXU1BVI6 version (CSC European Union). Thank you.
Click to expand...
Click to collapse
yes the only thing i did was
extract the boot.img from the tar
put it on my phone patched it with magisk
put the new patched file on my pc.
created a new ap tar using all the old files it had except i added the new patched boot.img
after all files are in i created the .tar
used the same BL_X200XXU1BVI6_X200XXU1B
used the new ar has all original files except the modified boot.img
used the same CSC_XAR_X200XAR1BVI6
it worked super su says its rooted. been at it all morning coudl not have done it without this guide
Got as far as step 28, where things went a bit off.
After the download from odin was complete, the device immediately shut down and starting going through a bootloop without me having touched power or volume at all.
Then after getting into the system recovery menu and doing a factory reset, it didn't reset the device with the firmware and when trying to power it on it just remained in the same bootloop as before doing the factory reset.
I'm using the boot.img file with firmware EUX - SMX200XXS1BVJ1 which I'm pretty confident is the correct version as it matches the build number on the device.
This is what I get on the system recovery after doing a factory reset.
at step 28 your supposed to
"Wipe data/factory reset" and select it. Confirm when prompted, and it will reset your device using the firmware you just installed.
it reinstalls the tablets new firmware
edit - it wont just start up the tablet like everything is brand new out of the box. thats why you need to "Wipe data/factory reset
I did factory reset. That's what produced the lines after -- Wiping data...
After factory resetting it doesn't seem to install anything and just goes right back to the system recovery menu. Rebooting the device at that point just has it going back into a bootloop.
Got it working.
Had to redownload the firmware from step 8 onto the device and then use magisk to make my own boot.img
Things to note in case anyone needs them is that the file magisk makes might not be called boot.img, in which case you do need to rename it to boot.img for it to work and also if you get stuck with being unable to access the download mode on your device, you can use FRP HiJacker to fix it.
I'm also stuck on "SetupConnection" in Odin. I enabled USB debugging, but that didn't seem to help.
Worked, thanks for this tutorial and your work with it.
regards
mkpcxxl
Hello, I conjured up the Android 13 on the A8 today. But unfortunately I can't get it rooted. The root checker says it's not rooted. What do I have to do to make it count as rooted again?
I got it solved myself and now have Android 13 on Samsung A8 (x200) and rooted :-D
Worked for me.
I initially had issues and thought I had bricked it, but a combination of Odin issues and possibly cable/bad firmware issues caused the problems and not this guide.
Nice one.
Sync999 said:
New to this community I hope this post is welcome here. Thanks to many of you I got a successful first time root and thought I would make a decent guide for others that stumble across this eventually.
This guide is for Windows only. I'm sure it would work similarly on Linux, but this is specific to Windows.
I AM NOT RESPONSABLE FOR ANY DAMAGE OR BRICKED DEVICE. That is always a risk you take with rooting, altering any software/firmware. This method did work for me, and if followed correctly it should work for you. Make sure you are using the same device this guide is for. That all being said, if anything goes wrong, this device is very easy to fix bootloops, soft bricks etc. Carry on.
YOU WILL LOSE ALL YOUR DATA AND YOUR TABLET WILL BE RESET TO FACTORY DEFAULT!! BACKUP ANYTHING YOU DONT WANT TO LOSE BEFORE STARTING THIS ROOT.
YOU WILL NEED A COMPUTER. This is NOT a hardware only root, in this guide, again, we will be using Windows 10.
Before starting anything, this will be the software list you need to download and install before moving forward...
The latest release of Magisk: GitHub - topjohnwu/Magisk: The Magic Mask for Android v.25.2 was the latest release at the time of this post, it might be updated when you are reading this. It should still work the same.
Odin: https://forum.xda-developers.com/attachments/odin3-v3-14-1-zip.5158505/ this should be a direct download link. If you dont like that, here is a link to the XDA fourm itself, make sure to download the Odin3 3.14.1.zip, ( 3.13.1.zip is not a link, reddit just highlights it because of the .zip, you just need to scroll down and find it in the forum, should be 1st or second in the list) NOT THE PATCHED VERSION.
The Firmware for your device (SM-X200) This is where I got mine, mind you it's the USA version: https://samfw.com/firmware/SM-X200/XAR/X200XXU1AVC1 If you are out of the states, there is many other sources for your exact firmware version, just type the second half of your build number (starting with "X200...etc.' into the browser followed by firmware then "download". The build number can be found in the software information inside of the "About tablet" section at the bottom of your settings.
The Samsung USB drivers: Samsung Android USB Driver | Samsung Developers You will need these to ensure a proper connection between your PC and tablet
And finally, this is optional, this already patched boot.img file already converted to .tar: https://drive.google.com/file/d/1Rm4BPaIVXWClhjKFencRnheJlDB3RRVm/view This is a working boot file, at least for me and many others on XDA, feel free to make your own if you wish, it will be explained in the guide below.
P.S Using the boot file above will save you some time and may help you avoid errors or crashes inside of odin or on your tablet. Also, better for those not as experienced.
The Guide now starts below.
Enable Dev options. (This is done by going into the "About Tablet" section at the very bottom of your settings, clicking "Software information", then clicking build number multiple times until a prompt shows up saying you are now a developer, or have unlocked dev settings.)
Enable OEM unlock inside of Developer settings.
Power off device, then hold both volume up and down buttons and plug your tablet into your PC to boot into download menu
Hold volume up once in download menu, to start OEM unlock prosses
When unlocked, the device with automatically factory reset
Set up device, Enable Wi-Fi either during or after setup prosses.
Re-Enable dev settings (as we did in step #1), and make sure "Enable OEM unlock" Is on and or grayed out.
Download latest firmware for your device and extract it using 7zip, (Link for firmware is at the begining of this guide) there should now be a list of 4 files starting with BL_, AP_, CSC_OMC, and HOME_CSC. (We won't be using HOME_CSC, more on that later).
Using Odin, install the AP BL and CSC . In the BL slot, click the BL, then go to the extracted firmware from earlier and select the file the file that starts with "BL_X200". Then give it a second to load in, move to the AP section. Click AP, then select the file from the extracted file again, that starts with "AP". And for CSC, select the file "CSC_OMC..." Not the "CSC_HOME..." After all the files are in the correct slots, click Start at the bottom of the Odin3 application.
Once odin is finished, you need to boot back into stock OS by holding down volume and power button to get out of download menu, if prompted to push power button during boot, do so.
Go through the setup again, enable Wi-Fi and check and make sure OEM unlock is still grayed out and enabled.
Download Magisk From there official GitHub on to your tablet (Link above)
Install Magisk
IMPORTANT!!
This is where you have two options, either skip these steps, and use the provided boot.img file, or make your own (this is harder, you may run into errors and issues, but most of you have been doing this much longer than me, this is just a guide from someone new to this, so I thought my incite may be easier to understand) SKIP STEPS #14-#21 if you chose to download the provided boot.tar file at the beginning of this guide. (I would recommend reading them still, because understanding the prosses will help with a successful root, whether or not you choose to make your own boot.img file, this advice is from experience. Knowledge is power, right?
14. If you choose to make your own patched boot file with magisk, go back to your PC, extract the "AP_X200..." file inside of the firmware file you already extracted, send that file to your Tab A8 (again this is for the SM-X200 ONLY!) via plugging your tablet into your laptop (MAKE SURE ITS POWERED ON AND UNLOCKED)
14.5. You will be prompted to allow data transfer between your tablet and the PC something like " allow this PC to access...etc". Allow it. Open your tablets root storage from the file manager on your windows computer. This PC, then select your tablet. You should see the root files.
15. Return back to the folder of the extracted AP_X200... file you extracted previously; it should be in a standard file format now, not a .tar file
16. Find the "Boot.img" file, copy it and return to your tablets root file
17. Paste the boot.img file you copied from the extracted AP_X200... file, into the root directory of your tablet. Then unplug your tablet and return to your tablet for the next step.
18. Open magisk, click install on the top option, to the right of "Magisk" NOT THE ONE THAT SAYS "App". Then click "Select and patch file" find your "boot.img" file you previously copied over to your tablet in step #16/#17, its often in recent files, but should always be in the tab "Galaxy tab A8" You can find that tab by tapping the hamburger icon (three horizontal lines) in the top left corner. Once there, select the "boot.img" file.
19. Once you find your file, click "Let's go" back in the main Magisk screen
20. Once completed, it should show that it installed the patched boot.img file in your tablets download directory. You have now successfully patched the boot file. If you get an error or a crash, try again. If you keep running into errors, make sure your file is the correct "boot.img" file. Don't be shy, re-read the guide, start over, if necessary, we haven't gone too far yet to try again.
21. Plug your tablet back into your PC, go back to your tablets root directory via your computers file manager, open whichever file Magisk installed its patched "boot.img" file (it should be in the downloads folder of your tablets root directory) copy it to your computer. You can move it anywhere but if you move it back to where the other firmware files that we downloaded and extracted are, you will need to right click the file, hover over 7zip, then click "Add to archive". Then, in the section of the options where it says "archive format" change the file type to tar. You will need to do this step either way, but make sure it's done BEFORE moving it to the other files we extracted earlier, because it will prompt you to replace the file, we don't want to do that.
22. Now take your tablet, unplug it if it's still plugged in, and power off. Once it's powered down completely, hold both the volume up and down buttons like earlier to get into download mode when unlocking the OEM, and plug it into the PC (WHILE STILL HOLDING THE VOLUME BUTTONS UNTIL THE MENU APPEARS). Once the download menu appears, (should be familiar by now) click once on the up-volume button, and you will now be ready to download your files to root your device! Yayy!
23. Open Odin3, and it should have on the left a, "Log" info box, "<ID: somthing/somthing> Added! ("something/something will be numbers, just make sure it says added, that means it sees your Tablet is in download mode and ready for your patched files"
24. You will see 4 slots to the right of the Log page inside of Odin. They will read (top to bottom) "BL", "AP", "CP", "CSC, and "USER DATA". Only BL, AP, and CSC will be used in this prosses, and should be the only ones with check marks to the left of them. If the check marks are not checked, check them.
25. Now, (don't worry almost done!) In the BL slot, click the BL box, go to the extracted firmware from earlier (Step 8) and select the file the file that starts with "BL_X200". Then give it a second to load in, move to the AP section. Select it, then find your boot.img file you made using magisk, or downloaded via the link at the top of this post. Select it, and now move on to CSC. Click it, find your "CSC_OMC" file (you might get away with using the CSC_HOME..." file, but at this point your tablet shouldn't have anything you want to save, as it should have been wiped when unlocking the bootloader, so just take my advice and use the stock CSC_OMC file.
26. Now, you should have files in the BL slot, the AP slot, and the CSC slot. Double check and make sure there are nothing in the "CP" slot, nor the "USERDATA" slot. Once you are ready, and all files are in the correct slots, and your tablet is ready to start downloading, (should have an empty progress bar under the "cancel" instructions on your tablet screen) go ahead and click " Start" at the bottom of the Odin application.
27. This prosses should be relatively quick, less than a minute, but in my many tries, sometimes it was quick, other times it took a minute or two. Once done, the Odin app on your PC should read "Pass" in a green box towards the top right corner of the app, under the Odin logo.
28. Proceed to shut down the device, by holding down on the Power and Volume Down keys, once the screen goes black, lift off the power AND volume down key, and immediately press down on the Power key (again) and the Volume UP this time. (Some guides have said it's not necessary to release from the power key when the black screen starts, and to only change from the volume down key to the volume up key, but in my experience, this may lead to a bootloop *Don't worry, it's fixable*. So, I recommend you lift off both and then immediately start clicking the power *again* and volume up) This should bring you into the system recovery menu. Use the volume down key to scroll down, and the volume up key for up, the power button is to select the option in the menu. Scroll down to "Wipe data/factory reset" and select it. Confirm when prompted, and it will reset your device using the firmware you just installed.
29. Setup as usual, enable the Wi-Fi, double check that OEM unlock is still enabled and grayed out in the developer menu (you will have to re enable the dev menu). Then go to Chrome, type in "Root checker apk" and download the apk, should be available in the first or second result of Google. MAKE sure to allow Chrome downloads, it will prompt you when the apk is downloaded. Open it, and check for Root. This is when I got a pop-up from Magisk, but it may happen at any time. Whenever it happens, just follow its instructions, it will reboot your tablet, then when it's powered back on, go back to root checker. When you check for root, wait a couple seconds, a pop up should show up with a count down, allow it, and it will show that you...are now...ROOTED!
YAY, you did it congratulations. This took me probably 12 hours and many different forums, because there has been a great debate on how to do this properly, but from what I've experienced this is all the right info and guides shoved into one. Many thanks to the XDA forums, and especially user "tofor" on the XDA forums, for the patched boot file when people where still having issues making their own.
I may make a YouTube video explaining all this, but I'm not super into the idea. We will see, depends how this post does and if people still need help. Again, I'm not a pro when it comes to rooting. I'm a nerd, I know my way around tech, but I was an iPhone kid, so I grew up with jailbreaking, which was 100% easier cause most the work was done for you. That all being said, I'm sure I missed some terms, or dint explain something perfectly, so please, to all of you who are much more experienced with this, FEEL FREE TO CORRECT ME!! Have any questions, I'll try to get to them, but I'm not super active. If I don't get to you, I'm sure somebody will. I really hope this helps; this was hell for me.
Click to expand...
Click to collapse
what about android 13 on on sm-x200 is it same as these steps just use the tar for the android 13 build u r on? or no?
ignore this post.
So no root for android 13 ? if u find root could u share n ill do same if i fine a way.