Database Info

Slim ROM Camera For ROMs based on CM11 & CM12/AOSP/AOGP/AOKP etc

Dear Brothers,
This thread is to bring you an advanced camera of Slim Roms. The whole credit goes to the Slim Roms Teams. I just tried it and as I found it working so bringing this as a flashable zip for everyone. I found that the camera of Lollipop is not upto the expectation and so this camera serves the purpose here. Do Use this and let me know your feedback and working for devices that can be added in Post # 2.
It has many features like:-
Settings for :
1) Contrast,
2) Saturation,
3) ISO,
4) Sharpness,
5) Brightness,
6) Image quality,
7) Storage type etc.
Its fast and quite efficient for all CM11 & CM12 based ROMs.
DOWNLOAD
Procedure for Installing SlimKat Camera:-​
SlimKat Camera For all CM11 based ROMs
1) Reboot to Recovery (Stock Recovery will not work)
2) Make a Backup (Compulsory)
3) Flash the SlimKat Camera Zip
4) Wipe Cache & Dalvik Cache.
5) Reboot.
6) Go to System Settings --> Apps --> All Apps.
7) Clear Data of Camera App from there and then enjoy.
SlimKat Camera For all CM12 based ROMs
1) Reboot to Recovery (Stock Recovery will not work)
2) Make a Backup (Compulsory)
3) Reboot to System & Extract the Camera2.apk from the downloaded zip.
4) Open Root Explorer & delete the "system/app/Camera/Camera.apk" or "system/app/Camera2/Camera2.apk"
5) Copy the Camera2.apk to "system/app/Camera" folder or "system/app/Camera2" folder.
6) Change the permission of Camera2.apk to "RW-R-R"
7) Go to System Settings --> Apps --> All Apps.
8) Clear Data of Camera App.
9) Reboot to Recovery (Stock Recovery will not work)
10) Wipe Cache & Dalvik Cache. Reboot, let the system settle down & Enjoy.
Feel free to use my work or to include it in your ROM but do prefer to distribute credits to Slim ROMs team.
Screenshots are there for reference :-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please Note:-
Before asking questions or opposing anything written in OP, make sure you have done everything mentioned in steps to follow. If there is any problem still please post over here, I will try helping you as soon as possible.
Thanks & Regards
BOND

Reserved

Last One

[ROM][PORT][ Lollipop 5.0]- [5.8.27] MIUI V7 Ulefone Be Touch 2

[ROM][PORT][ Lollipop 5.0]- [5.8.27] MIUI V7 Ulephone Be touch 2 Beta 0.2
Hi Guys , I am presenting you the Very first Custom Rom for Ulephone Be touch 2 based on our faviourite MIUI 7 Beta Version released
This has been ported from other device for Ulephone B Touch 2 . Please Note this is a Beta Release you may expereince some bugs during you usage
!!!!DISCLAIMER:Rooting your phone and using custom ROMS have risks,You may brick your Device if instructions not properly followed .I will not be responsible for any brick devices , It is always advisable to make a backup of your phone before proceeding ....Blah blah ......blah !!!!!
Pre-requisite :
1. Rooted phone.
2. TWRP Recovery Installed
I have Only tested this on TWRP Recovery You mau use CWM recovery and Flash the rom
INSTALLATION INSTRUCTIONS
Download Rom and copy to Sd card
Reboot into TWRP Recovery
Go to Wipe Option in TWRP
Go to Advanced Format option
Choose cache ,Data ,Sytem and Dalvik cache partition and swipe for Formatting.
Flash ROM = wait until finish
First time boot after flashing take time ..please be Patient
All Done enjoy!!
Basic GAPPS Flash Tutorial
1. After first boot reboot your phone to recovery again.
2. Select [install zip from sdcard] → [choose zip from sdcard]→ [XXX-GAPPS.zip] → [YES]
3. Wait flash finished, press Back and select reboot system now [], the phone going to automatically restart with installed GAPPS.
4.Set up your Google and Xiaomi Accounts(for themes).
Working :
Wifi , Camera (fixed). Bluetooth ,all other basic functions
Known Bugs:
Mi Video Player Video Freezes audio continues .
solutiom :Alternate Video Player included.
Video Camera -Not saving the video you may use other camera apps for shooting video and save them .
Tweaks:
Android Keyboard included.
Alternate Video player included
Aleternate Music Player Included
ScreenShots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download Links
Rom MIUI7
https://drive.google.com/file/d/0Byi9A80ZsWakNXdDWHA1LUFZV2M/view?usp=sharing
Copy the Code
TWRP
http://www.needrom.com/download/be-touch-2-twrp-2-8-7-0/
Copy the Code​

update?

Is the rear camera working with this ROM? Home button? In other versions out there both of these didn't function

Guys ..I lost my phone it is no more with me..no further development possible ..when I tested it was working for me

[ROM][X620] Purple Fire 5.9.028S [MTK chipset]

Purple Fire 5.9.028S Custom ROM
is based on official stock ROM.
(5.9.028S Beta 5)
original link
------------------------------------------------------------------------------------------------------
This Purple Fire Custom ROM is for MTK chipset phones LeEco Le 2/ Le 2 Pro
------------------------------------------------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM is tested in all its functions and come
with english and chinese language.
You install opengaps and supersu.
Need to clean chinese bloatware.
Download link
1.25 GB
Installation procedure:
01.) Copy Purple Fire ROM and opengaps in your phone.
02.) Reboot in TWRP recovery and wipe cache, dalvik cache and data.
Install Purple Fire ROM
03.) First reboot and configure phone.
04.) Reboot in TWRP and install without wipe.
Install opengaps
05.) Reboot and configure Google Play Store
Install Gboard - the Google Keyboard
OPTIONAL
I.) Reboot in TWRP and install without wipe.
Install SuperSu
II.) Delete unnecessary chinese applications.
Install System app remover (ROOT)
SuperSU Latest Recovery Flashable.zip
opengapps ARM64 6.0 pico
Translated and prepared by: laikexpert

---------------------------------------------------------------------------------------------------------------------------------
1.) To eliminate the left page of the launcher with Chinese content: SOLUTION
Long press on empty area of the launcher and press on the eye that appears on top of the launcher page
or install Nova Launcher.
----------------------------------------------------------------------------------------------------------------------------------
3.) Notifications not Working: SOLUTION
Dial *#*#46360000#*#* and disable “Enable background resource control”
Turn off the phone. (just in case).
----------------------------------------------------------------------------------------------------------------------------------
4.) Orange State: SOLUTION
your device has been unlocked and can't be trusted, your device will boot in 5 seconds
STOP_Orange+_state S20.zip
Reboot in recovery and install without wipe.
Translated and prepared by: laikexpert

Installing... :good:
If i find any bug, i´ll let u's know.
Latest... so far so good. After 2h .

@laikexpert Can you provide a list of which bloatware apps to remove? And what's the SOT for this rom? (alternatively PCMark battery benchmark)
Thanks in advance

A few screenshots from upiter707
4PDA Forum

I'm from Purple 26s that was amazing.
I've just upgraded to 28s, but I have a problem: the status bar most of the time became black, and unreadable.
The only way to see it white is pressing home, or swipe left or right from home.

This ROM has all the bloated stock apps removed? Thanks.

twincharge said:
This ROM has all the bloated stock apps removed? Thanks.
Click to expand...
Click to collapse
No, you have to remove them.
Plus there's a malware somewhere (use Malwarebytes).

[ROM][7.1.1][C106][TWRP] JUI ROM VR12 by Cuoco92

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is modded JUI ROM by @Cuoco92 running on android 7.1.1. I do not own and make this ROM but I have asked for @Cuoco92 permission to make a thread here so that we can all refer and share this ROM in one, easy and organized place​.
I'm using C103 device but so far this ROM is working fine for me with working wifi, hotspot, bluetooth, compass and fingerprint.
Installation :​1. Boot into TWRP
2. Make a backup (optional. I don't need backups because I'm flashing this right from the beginning, migrating from EUI)
3. Wipe>Format Data (this is to remove device encryption so that you can see your internal memory in TWRP)
4. Wipe>Advanced>Cache, Dalvik/ART, System, Data (wipe)
5. Copy ROM into internal memory.
6. Go back to TWRP main page and select Install.
7. Flash the ROM.
8. Device will be automatically restarted after flashing finished. Don't worry if it does.​
Downloads :
- ROM (VR12 from GDrive)
- VR10 (stable, from AFH)
Features :
- Android 7.1.1 Nougat
- New recents compared to the iOS like EUI
- Tethering data limit
- Auto connect in File Transfer Mode
- Dolby and Viper4Android pre-installed
- Latest 3.2.1 TWRP automatically flashed after ROM flash finished.
- CameraHAL3 enabled ( in Cuoco app ; pre-installed with ROM)
- Adaway pre-installed (also in Cuoco app)
- Rooted with Magisk v16.3
What's working :
1. Wifi and tethering
2. Fingerprint unlock
3. Root
4. Compass
5. SLR (bokeh), Mono Mode in camera.
6. Band 3 and Band 5 LTE, WCDMA, GSM.
7. Pretty much everything so far...
What's Not Working :
- Some users reported speaker bugs coming from C103 devices. You can try this fix here​
Special thanks to @Cuoco92 for this wonderful ROM and for allowing me to create a thread for his ROM here. Check out all of his wonderful work in AFH here :​
Screenshots :​

Some camera samples :
Bokeh :
Mono :
Auto :

reserved #2

Thread closed.
https://forum.xda-developers.com/android/development/rom-jui-rom-vr12-cuoco92-t3780509

[ROM][UNOFFICIAL] Resurrection Remix 5.8.5 for Alcatel OneTouch Hero 2 + TWRP 3.2.1.0

First of all, sorry for not posting this to the development section, I am currently unable to do so, if a moderator could move this to the phone's topic/thread/forum, that'd be great.
I recently managed to port both the rom and TWRP for this device, these are my first ever manually done ports. So I do not know much about that.
Also, the rom also has SuperSU root access.
Installation:
- Get SP Flash Tools (I used version 5.1512.0)
- Download the Resurrection ROM - https://mega.nz/#!Qhsi2ATa!2w45GlSMZHIxNRD-ocrDcvyeEzVkcVKOqaI4n-eaa1o
- Download TWRP - https://mega.nz/#!BosSiaAJ!apwPAEuNkWq0A6qKtadVQAkkjzZm4ka6gA5MUDT6r1c
- Download Gapps (ARM 7.1 Micro/Nano/Other) - http://opengapps.org/
- Flash the recovery through SP Flash Tools
- Boot to recovery (Power+Volume UP while the device is turned off)
- Required - Wipe system, cache, data, dalvik cache
- Flash ROM and Gapps
- Reboot.
- Wait for it to boot
IMPORTANT
This rom and TWRP are NOT bugless. Here are the issues:
Rom:
- Camera is not working
- No audio, only with earphones/headphones
TWRP:
- In TWRP, in the reboot menu, all options to reboot to specific mode just shut down the device instead. So for example, if you click reboot to recovery, it just shuts the device off. You have to reboot to recovery manually instead with hardware buttons, and so on.
About the ROM:
I tried fixing the issues by replacing the appropriate lib files, but no luck. It either bootlooped afterwards, or nothing changed at all. Not sure what use will it be of this rom if main features are not working. But I decided to do this just for fun and to share it with you, I don't think I can fix these problems myself, plus I will get rid of this device soon anyway. In case anything goes wrong, I am not responsible for the damages that may occur. Make sure you get the stock rom and flash it if you want to go back to the original.
Special thanks
-Techboxlab and the team that made this rom, all credits go to people here: https://techboxlab.com/mt6592-resurrection-remix-5-8-5-kernel-3-4-67-nougat-7-1-2/)
ROM OS Version: 7.1.2 Nougat
ROM Kernel: Linux 3.4.67
Screenshots (sorry for large images)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}