Hi
as i have to reactivate my old LG G5 i get an update message.
But cannot install it due to twrp.
there is currently v20v-eur-xx / Android 7.0 path 01.03.2018 installed.
Which ROM i have to install, so i didnt get that message again.
And additional question, will i lose the current Data due to updating?
B'R'
hello, its correct that you have a older version.
you can flash [STOCK][O] H850 30a OPEN EU ROM Flashable ZIPs + KDZ (Android 8.0 "Oreo") to update your phone to oreo
i think you can only install it by clean flashing, so that means you will lose your current data.
---------- Post added at 04:57 PM ---------- Previous post was at 04:56 PM ----------
also you can only flash this if you have a lg g5 h850
Related
How to uninstall TWRP? I did the uninstall process by flashing SAMMOBILE rom by ODIN. All the things has been as previous and root has also gone. But my device type, product name showing zeroflte & zerofltexx. How to remove everyting connected with TWRP and root? I did cache removal from recovery and factory reset but no result. Please help!
Have you found a way I have a link but not for my model. http://www.galaxys6edgeupdate.com/galaxy-s6-edge-stock-recovery/
---------- Post added at 12:59 PM ---------- Previous post was at 12:53 PM ----------
You're going to have to root again use flashfly download the the img for your model and then install the stock rocovery using the app flashfly, then install your stock rom firmware remember your baseband version. http://www.galaxys6edgeupdate.com/galaxy-s6-edge-stock-recovery/
There's been a bit of talk about rooting OI1 in the last few days, but I've got a question on the OH1 roms and compatibility with OI1 firmware. Can we flash the older Oh1 roms with the OI1 firmware and everything will be good? Example, radio issues arising. I don't have access to a PC during the week if something goes wrong.
No issues. Works fine. Just can't Odin back to OH1.
My phone was on Ol1 and I flashed an OH1 rom and it went bad.
From what I've been told, nothing can be done until the Ol1 firmware is released.
---------- Post added at 08:25 PM ---------- Previous post was at 08:18 PM ----------
Cancel that, I cannot read lol
An OH1 should be able to run OL1..... But who has a copy of ol1 available? I've searched everywhere for days and cant find anything.
SuperSlow911 said:
My phone was on Ol1 and I flashed an OH1 rom and it went bad.
From what I've been told, nothing can be done until the Ol1 firmware is released.
---------- Post added at 08:25 PM ---------- Previous post was at 08:18 PM ----------
Cancel that, I cannot read lol
An OH1 should be able to run OL1..... But who has a copy of ol1 available? I've searched everywhere for days and cant find anything.
Click to expand...
Click to collapse
OI1 firmware isn't released yet and if you went from OI1 firmware to OH1 you're probably hard bricked. Can you get into recovery? If you need a OI1 rom, you're in luck, I have one
I absolutely can. I originally had access to the stock recovery but could only choose to do a factory default reset which didn't help at all.
Then I used ADB to install TWRP and installed a new firmware which it accepted but, it sticks in a boot loop.
before flashing an OH1 firmware and kernel TWRP informed me there was no OS on the S6 Edge (Sprint) and NOTHING was mounted. Fixed the mounting issues. Re partitioned to factory specs and installed the custom rom.
The Rom fixed the OS and Root issue and is working on the phone as it makes a 5 tone song (supposed to during boot) but constantly loops back. I haven't been able to discover a way to look at the loop, all I know is its stuck on the "powered by" screen.
---------- Post added at 09:32 PM ---------- Previous post was at 09:23 PM ----------
Soooperstar said:
OI1 firmware isn't released yet and if you went from OI1 firmware to OH1 you're probably hard bricked. Can you get into recovery? If you need a OI1 rom, you're in luck, I have one
Click to expand...
Click to collapse
If that ol1 firmware works I will HAPPILY donate to you. BELIEVE ME.
SuperSlow911 said:
I absolutely can. I originally had access to the stock recovery but could only choose to do a factory default reset which didn't help at all.
Then I used ADB to install TWRP and installed a new firmware which it accepted but, it sticks in a boot loop.
before flashing an OH1 firmware and kernel TWRP informed me there was no OS on the S6 Edge (Sprint) and NOTHING was mounted. Fixed the mounting issues. Re partitioned to factory specs and installed the custom rom.
The Rom fixed the OS and Root issue and is working on the phone as it makes a 5 tone song (supposed to during boot) but constantly loops back. I haven't been able to discover a way to look at the loop, all I know is its stuck on the "powered by" screen.
---------- Post added at 09:32 PM ---------- Previous post was at 09:23 PM ----------
If that ol1 firmware works I will HAPPILY donate to you. BELIEVE ME.
Click to expand...
Click to collapse
Its not the full firmware but only a deodexed OI1 rom. I'll pm you
OI1 firmware
http://forum.xda-developers.com/showthread.php?t=3219484
Ok, I have a Note 5 from Tmobile, the problem i am having is i am not able to go back to 5.1.1 cokc firmware
I had the 6.0.1 Rom from Jovi, in the instructions I had to flash the leaked MM bootloader and Modem, then with TWRP flash the Rom
Everything went fine with no problems, now since Tmobile released MM for their Note 5 I wanted to go back to LP 5.1.1 and take the over the air update
Well before i did that i went to TWRP and ereased everything including Format Data, no operating system, well i though just with Odin and the official LP 5.1.1 would suffice
Now i am getting an error in Odin as failed to flash the Official LP firmware. Can anybody recommend a method to get this thing back to life ??
thanks
MHeat said:
Ok, I have a Note 5 from Tmobile, the problem i am having is i am not able to go back to 5.1.1 cokc firmware
I had the 6.0.1 Rom from Jovi, in the instructions I had to flash the leaked MM bootloader and Modem, then with TWRP flash the Rom
Everything went fine with no problems, now since Tmobile released MM for their Note 5 I wanted to go back to LP 5.1.1 and take the over the air update
Well before i did that i went to TWRP and ereased everything including Format Data, no operating system, well i though just with Odin and the official LP 5.1.1 would suffice
Now i am getting an error in Odin as failed to flash the Official LP firmware. Can anybody recommend a method to get this thing back to life ??
thanks
Click to expand...
Click to collapse
Do a fullwipe system data boot cahhe internal everything via twrp then boot to download mode and odin cokc it should work if not canr help anymore
Sent From My SM-N920T Running Marshmallow 6.0.1 Rooted/TWRP
still fails, going crazy now
UPDATE: got it to work, such a dummy i was selecting the CP slot in Odin instead of AP
Mine is failing as well, where did you get the firmware that is working for you? I am using AP in Odin, fail...
---------- Post added at 01:32 PM ---------- Previous post was at 01:23 PM ----------
Never mind. I just need to read harder next time.
mycomputerisjunk said:
Mine is failing as well, where did you get the firmware that is working for you? I am using AP in Odin, fail...
---------- Post added at 01:32 PM ---------- Previous post was at 01:23 PM ----------
Never mind. I just need to read harder next time.
Click to expand...
Click to collapse
just download from sammobile then wipe everything, reboot to download mode, select AP from Odin and load the image your downloaded from sammobile, cokc firmware 5.1.1
Use Odin-v3-10-7-1 http://samfirm.net/threads/tool-new-odin-v3-10-7-1-support-new-devices-2015-2016-s7-s7e-s6-s6e-s6e-note-5.27/
---------- Post added at 10:35 AM ---------- Previous post was at 10:29 AM ----------
Firmware 6.0.1 aquí http://forum.xda-developers.com/tmobile-galaxy-note5/general/official-link-rom-stock-android-6-0-1-t3361891
ok i just saw that the offical marshmellow update had been released and wanted to upgrade.
i have the cricket 5.5" idol 3
my phone is rooted and has twrp installed would like info on how to get the update or a stock rom for the phone with marshmellow.
i am new to the upgrading after root and dont know if hiding root is enough or if i need to uninstall the su binary.
also not sure if the updated phone is rooted in the same way if i have to uninstall the su binary.
Hi,
You can reflash stock recovery and unrooot, then upgrade trough the Alcatel Update app.
Or you can flash stock modded rom UE 4 by murigny64. You'll get the mm stock rom without losing recovery. Have a look to it thread : http://forum.xda-developers.com/showthread.php?t=3435577
Is there a tutorial link for flashing the stock recovery and unrooting?
If so id be grsteful for the links.
As always thanks for any help provided.
Sent from my 6045O using XDA-Developers mobile app
To unroot, check the apps settings to see if there is an option to completely unroot.
If you want to get back to completely stock, you could use the mobile upgrade software to perform a factory restore. Check the official alcatel website for the program and drivers.
ok will be resetting and reverting to stock then will reinstall root and twrp.
running mobile upgrade now.
will update soon
boot is slow as hell.
may have issues
will update in a sec after a second reboot attempt
boot sucessfull.
updated need updated root and twrp guide for the new rom
wow
this is enought to drive me to a custom rom.
So the phone is running mm or lp?
it was runing mm.
discovered that adb is disabled hince no twrp and no trusted root btw kingo did root.
now im back to 5.0.2
looking for the modified update.zip i saw mentioned that doesnt overwrite bootloader.
ok got update.zip
from fotadownload folder need help with the modifier script.
i probably wouldn't go back to stock to then upgrade, as from what i've read getting twrp and root back on after upgrading to mm is not as easy as just keeping twrp and starting from there
---------- Post added at 03:50 PM ---------- Previous post was at 03:47 PM ----------
there are mm roms in the Onetouch Idol 3 Android Development forum which are already prepped to just flash from twrp.
for example > [ROM/FIRMWARE][6045X] Android 6.0 Marshmallow for Alcatel Onetouch Idol 3 5.5<
---------- Post added at 03:54 PM ---------- Previous post was at 03:50 PM ----------
or >[6045][6.0.1][Stock-based] Project MATERIAL<
the ota modifier script keeps the bootloader and abd commands.
honestly id be fine with any root other than kingo wich seems to be the only working one
ok need a stable problem free marshmellow rom any recomendations.
im a linux noob and the ota modifier instructions baffle me at best.
Tty Alek OS custom ROM: http://forum.xda-developers.com/idol-3/development/rom-6045-spb-1-0-stock-stable-fast-oc-t3392375
Hi,
I am a noobie so just any help would be much appreciated: for some reason my Moto G 2015 occasionally messes up its baseband and wifi mac address and I have in the past successfully revived it by flashing an appropriate stock ROM with RSD lite. However, this time around that didn´t work and I got failure at .gpt bin. Since then, I have rooted my phone and installed TWRP and tried flashing it again but get a preflash validation error. Installing Lineage has fixed the wifi mac address but the baseband issue remains.
I suppose that this has to be do with the fact that my BL in the fastboot boot reads 80.cf (sha 8bfe213, 2017-03-13) which is more recent than the stock ROM. Is that a correct assumption? What can I do to get my baseband working?
Thanks!
Just skip gpt.bin and bootloader while flashing the firmware u r getting this error cus latest firmware image of Moto g3 has not being flashed,as it's not available
Is this possible to do via TWRP? How so? Unfortunately I am travelling and dont have access to a PC so I was wondering if this can only be done via cmd prompt. In any case, could you please guide me through the steps for skipping these two and flashing the rest?
Thanks a lot for your help!
You can use flash fire to flash stock firmware
---------- Post added at 06:11 PM ---------- Previous post was at 06:07 PM ----------
Or these links may help
https://forum.xda-developers.com/20...m-stock-motorola-roms-twrp-flashable-t3621387
https://forum.xda-developers.com/2015-moto-g/development/rom-stock-rom-6-0-1-optimized-t3609991
https://forum.xda-developers.com/20...m-moto-g-2015-unmodified-stock-6-0-1-t3587390
---------- Post added at 06:14 PM ---------- Previous post was at 06:11 PM ----------
Check your model no. before flashing it not available flashfire is the only way
So the flashfire method didn't work. I just ended up with a phone that needed to be revived manually by flashing through fastboot. I managed to flash the 6.0.1 version for the Osprey by skipping gpt.bin. However, the baseband is still missing. Can anyone help me out with a newer stock image that I can try to flash? Or is there a particular patch? Please do let me know what I can do get the baseband back....[and really what a strange issue to lose your baseband because of low battery...]
Thanks!
So flashing via fastboot a couple of times ended up fixing the baseband issue--it shows up in the bootloader and in the settings tab. However, the sim isn't still detected. This is a dual sim phone. I have tried wiping the partition cache and using other sims but without luck. Any ideas?
Thanks!