Database Info

[GUIDE][ROOT+CWM]Samsung Galaxy Ace Plus GT-S7500L

Note:This is only for S7500L
This should work on any S7500L
Recovery Mode: volume up+ volume down + home + power
Download Mode: volume down + home + power
First download Odin
Put phone into download mode and connect to the PC
Flash the recovery.tar package as PDA and wait for phone to reboot
Put phone into download mode and connect to the PC Again
Flash the boot.tar package as PDA and wait for phone to reboot
Download and extract the final.zip package on your PC
Boot in CWM recovery and connect phone to PC
Run runme.bat on PC while phone is in recovery mode
Reboot the phone after process is over.
Obs: If you have problem with sound flash this ROM and repeat the root process.
Obs 2: You get the yellow triangle
My Credits goes to:
DOOMLORD
Chainfire
and all others Devs.

In the last step, I can't go to CWM Recovery (Phone Off, Vol Up+OK+Power) and into Android I lost sound. I have firmware TTT. Any idea ?
Thanks

hunterve said:
In the last step, I can't go to CWM Recovery (Phone Off, Vol Up+OK+Power) and into Android I lost sound. I have firmware TTT. Any idea ?
Thanks
Click to expand...
Click to collapse
Use this rom http://www.hotfile.com/dl/155738327/60846d8/S7500LVJLD2_S7500LZTOLD2_ZTO.zip.html
After that make root again.

hunterve said:
In the last step, I can't go to CWM Recovery (Phone Off, Vol Up+OK+Power) and into Android I lost sound. I have firmware TTT. Any idea ?
Thanks
Click to expand...
Click to collapse
Recovery is Vol up + Vol Down + Home + Power
Pay attention.
Edit:is difficult to do
but it works

I have tried that like a million times but all my phone is do in the last step while i press the up+down+power is keep vibrating like it is ringing
can you explain how to press te buttons or my issue is other?
edit:
sorry, my bad, it´s really so hard to press all of these
almost 2 hours trying

danilow_16 said:
I have tried that like a million times but all my phone is do in the last step while i press the up+down+power is keep vibrating like it is ringing
can you explain how to press te buttons or my issue is other?
edit:
sorry, my bad, it´s really so hard to press all of these
almost 2 hours trying
Click to expand...
Click to collapse
Please reply if works for you.
Thanks

I have a S7500L.
Have anyone successfully used this method?.

jvalecillos said:
I have a S7500L.
Have anyone successfully used this method?.
Click to expand...
Click to collapse
I have tested on 6 S7500L
All Successful.
If works for you, please reply

It worked !,
have u tried this custom kernel after rooting ur phone?
http://forum.xda-developers.com/showthread.php?t=1674667

comrex said:
It worked !,
have u tried this custom kernel after rooting ur phone?
http://forum.xda-developers.com/showthread.php?t=1674667
Click to expand...
Click to collapse
I dont have de S7500L.
I made this root for a friend.
And the link you have post is only for S7500,not for L model.

Hello,
I just rooted my S7500L, Chilean version, without any problems!
Muito obrigado Andersondj!

Corsario_Negro said:
Hello,
I just rooted my S7500L, Chilean version, without any problems!
Muito obrigado Andersondj!
Click to expand...
Click to collapse
Thanks for the reply.
De nada.

Corsario_Negro said:
Hello,
I just rooted my S7500L, Chilean version, without any problems!
Click to expand...
Click to collapse
What about the sound flash issue?, Did you had any problems?.
My phone was bought in Miami, but is S7500L, in fact on the back where is the battery, the information is in spanish.
In Settings I can see this:
Android version: 2.3.6
Baseband version: S7500LVJLB1
Kernel version: 2.6.38.6 [email protected]#1
Build Number: GINGERBREAD.VJLB1
Baseband information and this post suggest that it have Trinidad and Tobago firmware or something like that.
Andersondj said:
I dont have de S7500L.
I made this root for a friend.
And the link you have post is only for S7500,not for L model.
Click to expand...
Click to collapse
Anderson, Where did you get the rom from which the patch was made?, What version was?
Thanks in advance.
EDIT: Now I see, I found your postings on http://brasildroid.com.br. Did you use the Brazilian rom, didn't you?

Brazilian ROM
Link on the first post.
Enviado de meu GT-I5500 usando o Tapatalk 2

jvalecillos said:
EDIT: Now I see, I found your postings on http://brasildroid.com.br. Did you use the Brazilian rom, didn't you?
Click to expand...
Click to collapse
Yes,Braziliam Rom

jvalecillos said:
What about the sound flash issue?, Did you had any problems?.
Click to expand...
Click to collapse
No sound problems, nothing. Apart from the yellow triangle, but it doesn't do anything and it's barely visible.
The only bad thing (my fault though) is that I deleted Gallery3D.apk and TwWallpaperChooser.apk and now I can't change the lock screen wallpaper. I use QuickPic for photos and it doesnt have the lock screen option, only contact photo and phone wallpaper.

Corsario_Negro said:
No sound problems, nothing. Apart from the yellow triangle, but it doesn't do anything and it's barely visible.
The only bad thing (my fault though) is that I deleted Gallery3D.apk and TwWallpaperChooser.apk and now I can't change the lock screen wallpaper. I use QuickPic for photos and it doesnt have the lock screen option, only contact photo and phone wallpaper.
Click to expand...
Click to collapse
Here.
Gallery and TwWallpaperChooser.
http://www.mediafire.com/?a5fzje7hzfq05v3

Andersondj said:
Here.
Gallery and TwWallpaperChooser.
http://www.mediafire.com/?a5fzje7hzfq05v3
Click to expand...
Click to collapse
Oh thank you but I already have the apps (I did a backup of system/app with ADB).
I think I will start using a different lock screen like 91 Locker, that has a ton of options including background change.

How can i Install the ROM
I havent tried yet, becouse i want to be sure bout everything
How do you install the ROM that you posted in case you have problems?
And how can I Upgrade to 4.0 ICS or something like this?
sorry bout my noobness

eduardoazul_23 said:
I havent tried yet, becouse i want to be sure bout everything
How do you install the ROM that you posted in case you have problems?
And how can I Upgrade to 4.0 ICS or something like this?
sorry bout my noobness
Click to expand...
Click to collapse
Odin=PDA
There's no 4.0 for ace plus.
Enviado de meu GT-N7000 usando o Tapatalk 2

[HOW TO ROOT]Tinji I9300

Hi, i have buy an android smartphone, the tinji i9300. Have MTK6577, 512 RAM and android 4.1.1.
But i want root this for make many task
So how can make this root please ?
thanks

flavien317 said:
Hi, i have buy an android smartphone, the tinji i9300. Have MTK6577, 512 RAM and android 4.1.1.
But i want root this for make many task
So how can make this root please ?
thanks
Click to expand...
Click to collapse
I have the same phone and i also need to root the phone, any help?

elessartk said:
I have the same phone and i also need to root the phone, any help?
Click to expand...
Click to collapse
Send me a PM please i have questions

This Tinji I9300 looks similar to the Star GT-i9300 MT6577 from cect-shop.com. I bought the CECT version and rootet it with a modified boot.img.
I attached a screenshot of my system-info. If you think we have the same phones i can upload my boot.img.
http://forum.xda-developers.com/attachment.php?attachmentid=1276083&stc=1&d=13456611160

hardi75 said:
This Tinji I9300 looks similar to the Star GT-i9300 MT6577 from cect-shop.com. I bought the CECT version and rootet it with a modified boot.img.
I attached a screenshot of my system-info. If you think we have the same phones i can upload my boot.img.
http://forum.xda-developers.com/attachment.php?attachmentid=1276083&stc=1&d=13456611160
Click to expand...
Click to collapse
yes it is all same like this. have root the phone ? have good rom for this, becasue just 512ram is verry little ?
thanks

hardi75 said:
This Tinji I9300 looks similar to the Star GT-i9300 MT6577 from cect-shop.com. I bought the CECT version and rootet it with a modified boot.img.
I attached a screenshot of my system-info. If you think we have the same phones i can upload my boot.img.
http://forum.xda-developers.com/attachment.php?attachmentid=1276083&stc=1&d=13456611160
Click to expand...
Click to collapse
Can you also send me the file?

Hi,
i used a modified boot.img to root the phone.
I did it on my own for the phone i've bought at cect-shop.com (see above) so i'm not sure that it will work on other i9300s too.
I recommend to save your own boot.img first using the readback function from the flashtool with startadress:0x0000000000f88000 and lenght 0x00600000.
You are using this file on your own risk, good luck !

hardi75 said:
Hi,
i used a modified boot.img to root the phone.
I did it on my own for the phone i've bought at cect-shop.com (see above) so i'm not sure that it will work on other i9300s too.
I recommend to save your own boot.img first using the readback function from the flashtool with startadress:0x0000000000f88000 and lenght 0x00600000.
You are using this file on your own risk, good luck !
Click to expand...
Click to collapse
thanks but have you guide for save boot im and root ?

flavien317 said:
thanks but have you guide for save boot im and root ?
Click to expand...
Click to collapse
Take a look into ColonelZaps blog : http://colonelzap.blogspot.de/2012/07/star-note-ii-n9770-mt6577-dual-core.html
It's the same way, just use the i9300 boot.img instead of the one from the blog.
How to read your boot.img per readback should be clear if you play around a bit with the flashtool.

re
i make all of step but, i change the n9770root.zip by the boot of your boot.img ? how can i save my boot img of the no root phone ?
thanks

flavien317 said:
i make all of step but, i change the n9770root.zip by the boot of your boot.img ? how can i save my boot img of the no root phone ?
thanks
Click to expand...
Click to collapse
n9770root.zip includes all what you need, drivers (maybe the most difficult part), flashtool and a boot.img. This boot.img must be swapped with my file. You can do this by doubleclicking the boot.img in the flashttool after loading the scatterfile. Try it out, you can't harm anything as long as the phone is not connected.
When you opend the flastool you will find a button labeled with 'readback'. Click it, than press 'add' and enter the adresse and length. if you finished that press readback and the tool will read your boot.img to your harddisc.

hardi75 said:
n9770root.zip includes all what you need, drivers (maybe the most difficult part), flashtool and a boot.img. This boot.img must be swapped with my file. You can do this by doubleclicking the boot.img in the flashttool after loading the scatterfile. Try it out, you can't harm anything as long as the phone is not connected.
When you opend the flastool you will find a button labeled with 'readback'. Click it, than press 'add' and enter the adresse and length. if you finished that press readback and the tool will read your boot.img to your harddisc.
Click to expand...
Click to collapse
i can't arrieved to download, i clik on yes and after the download don't begining.
and for save my boot.img, i don't understand, i can't connect my phone ? i make just the adress and leght you have post ? and sure it is the same like my phone ?

flavien317 said:
i can't arrieved to download, i clik on yes and after the download don't begining.
and for save my boot.img, i don't understand, i can't connect my phone ? i make just the adress and leght you have post ? and sure it is the same like my phone ?
Click to expand...
Click to collapse
You have to load the scatterfile, change the boot.img,then first press 'download' before you connect your phone which have to be off.
The download should start automaticly, if not or if an error-window appears the driver is not installed correctly.
I wasn't able to install the driver on 2 Windows 7 PCs. I reactivated my old Windows XP PC and was succesfull. It seems to be a bit difficult to install the driver.
The adresse and length should be the same on every MTK6577 phone, you had to connect your phone as the last step. Doesn't matter if you want to download or readback.
I know no other way to root a MTK6577 phone than flashing a rootet boot.img, it was easier on MTK6575 phones.

if i understand, i open flashtool, i make all like you say (boot img, scartet fil...), i click on download, i click on yes and i connect my phone (with or without batterie) ?
and i don't understand for save my boot ?
thx, and sorry, im noob in android

Phone white screen
Help, my phone show white screen after flash the boot.img... How to revert that...
---------- Post added at 01:57 AM ---------- Previous post was at 01:47 AM ----------
inamie said:
Help, my phone show white screen after flash the boot.img... How to revert that...
Click to expand...
Click to collapse
Ohh.. figure out copy the wrong file.. Now everything works fine..TQ

inamie said:
Help, my phone show white screen after flash the boot.img... How to revert that...
---------- Post added at 01:57 AM ---------- Previous post was at 01:47 AM ----------
Ohh.. figure out copy the wrong file.. Now everything works fine..TQ
Click to expand...
Click to collapse
Your phone is rootet ? What phone do you have ? Tinji i9300 ?
I just would like to know for which phones the modified boot.img can be used.
---------- Post added at 08:20 PM ---------- Previous post was at 08:11 PM ----------
flavien317 said:
if i understand, i open flashtool, i make all like you say (boot img, scartet fil...), i click on download, i click on yes and i connect my phone (with or without batterie) ?
and i don't understand for save my boot ?
thx, and sorry, im noob in android
Click to expand...
Click to collapse
Yes, connecting the phone should be the last step. Take the battery out for a second to reset the phone and put it back before connecting it.
As you say you are an android noob i would urgently recommend to make a backup first.
Start the flash-tool -> load the scatter-file -> click on 'Read back' -> click on 'Add' -> doubleclick the new entry -> give a name for your backup -> enter start-adress and length -> click ok -> click on readback button -> connect your phone.
If the driver is correctly installed the tool starts automaticly. The result should be a file with a bit more than 6MB.

thx very much, i have root the phone. But have you rom for this ?
thanks

flavien317 said:
thx very much, i have root the phone.
Click to expand...
Click to collapse
:highfive:
flavien317 said:
But have you rom for this ?
Click to expand...
Click to collapse
No, found no rom yet. Here is someone saying that he have a rom for the i9300 but i got no response so far.

hardi75 said:
:highfive:
No, found no rom yet. Here is someone saying that he have a rom for the i9300 but i got no response so far.
Click to expand...
Click to collapse
ok, rom is speciality for tinji/star i9300 ?

I don't know, just found this per google.
can anybody please make a readback from the recovery-file (0x0000000001588000 / 0x00600000) ?
I damaged mine while playing around, even though i'm not sure that the phone had a working recovery before.

How to install Google play store on YunOs v2.9 with out rooting ?

Hi I had brought chinese mobile through online shopping from taobao.com . After that I came to know that it is YunOs v2.9 . when I tried to install google play store , it installs but won't start ,saying "unfortunately google play store has stopped". Please help me how to make it work with simple steps. I was not able to use you tube,gmail etc....
thank U.
Siva.

do a factory reset and start all over.

no luck ?

sivahari said:
Hi I had brought chinese mobile through online shopping from taobao.com . After that I came to know that it is YunOs v2.9 . when I tried to install google play store , it installs but won't start ,saying "unfortunately google play store has stopped". Please help me how to make it work with simple steps. I was not able to use you tube,gmail etc....
thank U.
Siva.
Click to expand...
Click to collapse
For google play to work it needs some other apps that are hidden. The best would be to flash gapps package for your phone. This will require root. But just so you know, Google Play and all other dependecies (apps that google play needs to work) MUST be installed on the /system partition to work. This also requires root making the only way of proprely installing Google Play possible only with root (or a just a custom recovery such as CWM or TWRP)

janekmuric said:
For google play to work it needs some other apps that are hidden. The best would be to flash gapps package for your phone. This will require root. But just so you know, Google Play and all other dependecies (apps that google play needs to work) MUST be installed on the /system partition to work. This also requires root making the only way of proprely installing Google Play possible only with root (or a just a custom recovery such as CWM or TWRP)
Click to expand...
Click to collapse
I think my phone won't allow rooting. Can you please explain it to me step by step cuz I am not software or hardware expert.
thank u.

sivahari said:
I think my phone won't allow rooting. Can you please explain it to me step by step cuz I am not software or hardware expert.
thank u.
Click to expand...
Click to collapse
WARNING: Rooting may or may not break your phone. Rooting WILL void your warranty!
Go to internet browser to this link http://forum.xda-developers.com/attachment.php?attachmentid=2784451&d=1402084843
Install the apk to your phone.
Open it. There should be a few options.
At the botton there will be 2 or 3 buttons with names such as Broomir...
Try pressing all of them one by one. If it says Root Sucessfull on one of the buttons just turn off your phone and turn it back on.
You now have root. What is your phone model?

janekmuric said:
WARNING: Rooting may or may not break your phone. Rooting WILL void your warranty!
Go to internet browser to this link http://forum.xda-developers.com/attachment.php?attachmentid=2784451&d=1402084843
Install the apk to your phone.
Open it. There should be a few options.
At the botton there will be 2 or 3 buttons with names such as Broomir...
Try pressing all of them one by one. If it says Root Sucessfull on one of the buttons just turn off your phone and turn it back on.
You now have root. What is your phone model?
Click to expand...
Click to collapse
I think rom is custom made as well as phone is too. It has 6 gb ram and 256 gb internal memory.
thank u.

sivahari said:
I think rom is custom made as well as phone is too. It has 6 gb ram and 256 gb internal memory.
thank u.
Click to expand...
Click to collapse
Were you able to root?

janekmuric said:
Were you able to root?
Click to expand...
Click to collapse
you had already given me a WARNING , if something goes wrong I might loose IMEI number. So I am bit afraid and confused

sivahari said:
you had already given me a WARNING , if something goes wrong I might loose IMEI number. So I am bit afraid and confused
Click to expand...
Click to collapse
Imei is the least of your problems, you can brick your device making it completely useless. But that is VERY unlikely with the Framaroot. Cant you just write down your imei number on a peace of paper? To get the number you dial *#06*
Anyways I have rooted many devices and never got a hard brick. I had a soft-brick countless times but I know how to fix it.
Keep in mind that rooting will void your warranty but it shouldn't break anything (in most cases).

janekmuric said:
Imei is the least of your problems, you can brick your device making it completely useless. But that is VERY unlikely with the Framaroot. Cant you just write down your imei number on a peace of paper? To get the number you dial *#06*
Anyways I have rooted many devices and never got a hard brick. I had a soft-brick countless times but I know how to fix it.
Keep in mind that rooting will void your warranty but it shouldn't break anything (in most cases).
Click to expand...
Click to collapse
Installed framaroot.apk but no success. Any other option ? please.
thank u.

sivahari said:
Installed framaroot.apk but no success. Any other option ? please.
thank u.
Click to expand...
Click to collapse
Make sure you installed the latest version (1.9.2) and that you tried all the exploits (all the buttons below)
If you have tried it I recommend using iRoot (previously known as vRoot) or if that fails try Kingo Root.
Make sure you have installed ADB Drivers and Google's USB Drivers installed. Here's a 15 second installer.

janekmuric said:
Make sure you installed the latest version (1.9.2) and that you tried all the exploits (all the buttons below)
If you have tried it I recommend using iRoot (previously known as vRoot) or if that fails try Kingo Root.
Make sure you have installed ADB Drivers and Google's USB Drivers installed. Here's a 15 second installer.
Click to expand...
Click to collapse
Framaroot version is 1.9.3 ,no luck. iroot.apk also tried, but no luck. not yet tried kingoroot.

sivahari said:
Framaroot version is 1.9.3 ,no luck. iroot.apk also tried, but no luck. not yet tried kingoroot.
Click to expand...
Click to collapse
Try iRoot PC version. It is waaay better then the android version and works 90% of the time.

my understanding of YunOS, it is a custom Chinese ROM that rejecting google play. there's no indication YunOS works well with Google play even I browsed thru BBS and search engine in China

quiero saber si le funciono su instalación en YunOs yo tambien tengo un celular chino y no me da nisiqiera el Chip no da como puedo liberar el Chip?? y hacer que de Play Store???
porfavor alguien ayudeme

New update? Frd-l09c432b140

Hello, i just saw 3 "new" updates on FF. *see photo
Someone can test them? All 3 are aproved for installing.

I am downloading them right now, will keep you updated how they work out!

Lukke2804 said:
I am downloading them right now, will keep you updated how they work out!
Click to expand...
Click to collapse
Do you have some news for us?

Sheldd said:
Do you have some news for us?
Click to expand...
Click to collapse
I tried flashing the update.zip via twrp, that resulted in removing the entire OS, but not installing a new one. I think it also broke the vendor partition since i cant restore backups, I always get the error "vendor partition failed to mount". I am looking further into it a wil keep you updated how it works out. Be careful!

If you want to update, download and flash all updates (3) and not only one !

Jermin94 said:
If you want to update, download and flash all updates (3) and not only one !
Click to expand...
Click to collapse
I did, but I got errors after the first one so i could not install the others. I will however try again after formatting all data.

Hmmm
Update version goes from B399 to B140??

Oreo maybe !

No **** guys, DO NOT FLASH THIS VIA TWRP. Go with dload instead. I am currently recovering my phone with DC Phoenix because nothing else worked out.

The update is only for security patches.. That's what ff sais...

Same changelog as always... any difference between B399 and B140? Also, why we got incremental number in previous builds (B360, B394, B399) then we're going back to B140 now?

mie nu mi a venit nici 399 , sunt la 398 ...

DELETED!

Alegría1010 said:
mie nu mi a venit nici 399 , sunt la 398 ...
Click to expand...
Click to collapse
Same here, no B399 OTA.

FRD-L09C432B140 is Marshmallow 6.0 - EMUI 4.1

Bricked U11+. Asia HK CHT RUU

Does anyone have a link for the an RUU for the Asian variant of this device (1.24.400.3). Ran into some trouble last night and can no longer boot. I finally got the recovery back but still have the "This phone has been flashed with unauthorized software & is locked" message. Any help would be great.

10Rcalum said:
Does anyone have a link for the an RUU for the Asian variant of this device (1.24.400.3). Ran into some trouble last night and can no longer boot. I finally got the recovery back but still have the "This phone has been flashed with unauthorized software & is locked" message. Any help would be great.
Click to expand...
Click to collapse
The previous version to it was (1.24.400.2) which was floating online but it seems it's not the case anymore, if you can manage to find it you can update afterwards to (1.24.400.3) easily.
The stock rom zip file for (1.24.400.2) was named:
"2Q4DIMG_OCEAN_M_DUGL_O80_SENSE90GP_HTC_India_SEA_1.24.400.2_Radio_8998-002772-1712011153_release_519104_signed_2_4.zip"
There is the latest Europe update version(1.24.401.2) which i think it should work with your phone. Just rename the rom to "2Q4DIMG.zip" put it in the SDcard and flash it, hopefully it will work out.
The link to the update:
https://drive.google.com/file/d/1Zwgl8Ox9qafnDW7X-QEbHO8SOknoIbGK/view

Rashad83 said:
The previous version to it was (1.24.400.2) which was floating online but it seems it's not the case anymore, if you can manage to find it you can update afterwards to (1.24.400.3) easily.
The stock rom zip file for (1.24.400.2) was named:
"2Q4DIMG_OCEAN_M_DUGL_O80_SENSE90GP_HTC_India_SEA_1.24.400.2_Radio_8998-002772-1712011153_release_519104_signed_2_4.zip"
There is the latest Europe update version(1.24.401.2) which i think it should work with your phone. Just rename the rom to "2Q4DIMG.zip" put it in the SDcard and flash it, hopefully it will work out.
Click to expand...
Click to collapse
I just tried it and it didn't work. Told me that the CID is mismatched. Thanks for the help though.

10Rcalum said:
I just tried it and it didn't work. Told me that the CID is mismatched. Thanks for the help though.
Click to expand...
Click to collapse
I see sorry it didn't work out. If you can't find a link for the old version(1.24.400.2) let me know. i have it on my PC but my internet connection is slow and will take for ever to upload.

Rashad83 said:
I see sorry it didn't work out. If you can't find a link for the old version(1.24.400.2) let me know. i have it on my PC but my internet connection is slow and will take for ever to upload.
Click to expand...
Click to collapse
Have you firmware version 1.24.709.7 (it is asia_TW version)
10Rcalum said:
Does anyone have a link for the an RUU for the Asian variant of this device (1.24.400.3). Ran into some trouble last night and can no longer boot. I finally got the recovery back but still have the "This phone has been flashed with unauthorized software & is locked" message. Any help would be great.
Click to expand...
Click to collapse
I Have firmware version 1.24.400.2, I'm uploading you need waiting 40 minute for it

Ba Duc said:
Have you firmware version 1.24.709.7 (it is asia_TW version)
Click to expand...
Click to collapse
You mean this: https://forum.xda-developers.com/showpost.php?p=77129917&postcount=5
Anothre link(.rar):https://drive.google.com/drive/folders/1mm8kvfvWRHjIlWM7IdY8HHVzp7JOjv6Z, To install check this post: https://forum.xda-developers.com/showpost.php?p=77169546&postcount=15

10Rcalum said:
I just tried it and it didn't work. Told me that the CID is mismatched. Thanks for the help though.
Click to expand...
Click to collapse
this link for firmwave 1.24.400.2
https://drive.google.com/file/d/1QwoZzOJEMwLzOTQ6n-akhcs1Q_iZZTV5/view?usp=sharing
---------- Post added at 04:23 AM ---------- Previous post was at 04:04 AM ----------
Rashad83 said:
You mean this. Anothre link(.rar), To install check this post:
Click to expand...
Click to collapse
I have U11+ on software number is : 1.24.400.3
I want change MID, CID and flash firmware to software number is : 1.24.709.7 to get updates faster
Links .RAR and guide can do the change firmware of the device?
Thanks You

Ba Duc said:
this link for firmwave 1.24.400.2
https://drive.google.com/file/d/1QwoZzOJEMwLzOTQ6n-akhcs1Q_iZZTV5/view?usp=sharing
---------- Post added at 04:23 AM ---------- Previous post was at 04:04 AM ----------
I have U11+ on software number is : 1.24.400.3
I want change MID, CID and flash firmware to software number is : 1.24.709.7 to get updates faster
Links .RAR and guide can do the change firmware of the device?
Thanks You
Click to expand...
Click to collapse
Personally i didn't change so i can't speak from experience but it looks like it's possible, check the post by @allanon https://forum.xda-developers.com/showpost.php?p=77102169&postcount=2 it should help you out. Good Luck
Personally i don't think it's worth the hassle because we will get the update eventually it's not like HTC is releasing frequent updates.

Rashad83 said:
Personally i didn't change so i can't speak from experience but it looks it's possible, check the detailed post by @allanon https://forum.xda-developers.com/showpost.php?p=77102169&postcount=2 it should help you out. Good Luck
Personally i don't think it's worth the hassle because we will get the update eventually it's not like HTC is releasing frequent updates.
Click to expand...
Click to collapse
thanks you I will try it

Ba Duc said:
Have you firmware version 1.24.709.7 (it is asia_TW version)
I Have firmware version 1.24.400.2, I'm uploading you need waiting 40 minute for it
Click to expand...
Click to collapse
I successfully ran the RUU, no CID errors, but ti still tells me that the device has been flashed with unauthorized software and is locked

So. what is your CID and MID?

ba duc said:
so. What is your cid and mid?
Click to expand...
Click to collapse
cid: Htc__622
mid: 2q4d10000

10Rcalum said:
I successfully ran the RUU, no CID errors, but ti still tells me that the device has been flashed with unauthorized software and is locked
Click to expand...
Click to collapse
Is your imei still intact if not i am afraid it could be corrupted, which could mean you need to send your phone for service. Some phone brands give the same error if you root your device but from what i read so far you get this error if your EFS partition is corrupted.

Rashad83 said:
is your imei still intact i am afraid it could be corrupted, which could mean you need to send your phone for service.
Click to expand...
Click to collapse
I don't know, I'll have to check. If it's not, is there any way around sending it back ?

10Rcalum said:
I don't know, I'll have to check. If it's not, is there any way around sending it back ?
Click to expand...
Click to collapse
I am not aware of a way if it's the case. Hopefully i am wrong. If you can use your Wifi, Sim card Data, Bluetooth ... then your EFS isn't corrupted.
About EFS and a way to restore it: https://forum.xda-developers.com/oneplus-one/general/guide-efs-partitions-how-to-lost-t3307793

Rashad83 said:
I am not aware of a way if it's the case. Hopefully i am wrong. If you can use your Wifi, Sim card Data, Bluetooth ... then your EFS isn't corrupted.
About EFS and a way to restore it: https://forum.xda-developers.com/oneplus-one/general/guide-efs-partitions-how-to-lost-t3307793
Click to expand...
Click to collapse
Highly unlikely I can use wifi, bluetooth, etc. The phone won't boot, as soon as i try it goes straight to the bootloader :crying:

10Rcalum said:
cid: Htc__622
mid: 2q4d10000
Click to expand...
Click to collapse
are you edit file sdf1?

Ba Duc said:
are you edit file sdf1?
Click to expand...
Click to collapse
I did, but then i changed it back to what it was originally. HTC__622.

10Rcalum said:
I did, but then i changed it back to what it was originally. HTC__622.
Click to expand...
Click to collapse
okay ! I have also been like you, I will tell you about my repair process
1. I flash twrp-3.2.1-3-ocm_171201.imghttps://github.com/sabpprook/android_device_htc_ocm/releases/download/0.0.1/twrp-3.2.1-3-ocm_171201.img and,
2. in recovery I copy file sdf1_622.imgon my PC to internal storage and edit name to sdf1.img
3, in recovery Select Advanced -> Terminal and enter
4. enter
Code:
dd if=/sdcard/sdf1.img of=/dev/block/sdf1
5. copy file 2Q4DIMG.zip (rom 1.24.400.2) to sdcard
6. in recovery select reboot -> download mode and flash firmware
but you be sure originally CID is HTC__622

Ba Duc said:
okay ! I have also been like you, I will tell you about my repair process
1. I flash twrp-3.2.1-3-ocm_171201.imghttps://github.com/sabpprook/android_device_htc_ocm/releases/download/0.0.1/twrp-3.2.1-3-ocm_171201.img and,
2. in recovery I copy file sdf1_622.imgon my PC to internal storage and edit name to sdf1.img
3, in recovery Select Advanced -> Terminal and enter
4. enter
Code:
dd if=/sdcard/sdf1.img of=/dev/block/sdf1
5. copy file 2Q4DIMG.zip (rom 1.24.400.2) to sdcard
6. in recovery select reboot -> download mode and flash firmware
but you be sure originally CID is HTC__622
Click to expand...
Click to collapse
Okay, I'll try that now. Thank you !