Database Info

Xposed Framework {Advice Needed}

Hey guys,
I've been searching on the web regarding Xposed Framework. I've installed Magisk, and tried to download Xposed Framework for SDK 25, however whenever I reboot, its stick at the Google logo. I also tried the Xposed Installer which said arm64-v8a is not support at the moment, so I was wondering if anyone installed Xposed on their pixel? Any alternative ways?
Cheers

cwk8412 said:
Hey guys,
I've been searching on the web regarding Xposed Framework. I've installed Magisk, and tried to download Xposed Framework for SDK 25, however whenever I reboot, its stick at the Google logo. I also tried the Xposed Installer which said arm64-v8a is not support at the moment, so I was wondering if anyone installed Xposed on their pixel? Any alternative ways?
Cheers
Click to expand...
Click to collapse
wipe your phone and revert to stock and try again through magisk. it will eventually work and id the only xposed working on this phone right now. use the xposed installer in the description of the magisk module.

KittyRgnarok said:
wipe your phone and revert to stock and try again through magisk. it will eventually work and id the only xposed working on this phone right now. use the xposed installer in the description of the magisk module.
Click to expand...
Click to collapse
So I downgraded to Android 7.1.0 (NDE63H) from the official Google Website and installed Magisk v14.5 (beta) by flashing through TWRP Recovery. However, when I download the Xposed Module from Magisk, it was able to install. However, when I press the reboot button on Magisk, it turns into some sort of BootLoop where it stuck at the Google Logo. Any idea?
Cheers

cwk8412 said:
So I downgraded to Android 7.1.0 (NDE63H) from the official Google Website and installed Magisk v14.5 (beta) by flashing through TWRP Recovery. However, when I download the Xposed Module from Magisk, it was able to install. However, when I press the reboot button on Magisk, it turns into some sort of BootLoop where it stuck at the Google Logo. Any idea?
Cheers
Click to expand...
Click to collapse
Oh yeah i forgot to mention, after u downgrade to nougat you need to be on Magisk 14.2 and refuse to update it for xposed to work. ive not yet figured out why this is but i noticed that after updating to 14.3+ and trying to flash it would always do the google loop and i had to full wipe n just keep redoing the process until it works. being updated will cause the fail to boot and updating after its installed will break all installed magisk modules

Has anyone tried installing xposed framework from Magisk? Is it working?

I'm using Magisk for the first time and not sure if it's okay to install xposed framework from magisk.
could someone shine the light?

JerryGoyal said:
I'm using Magisk for the first time and not sure if it's okay to install xposed framework from magisk.
could someone shine the light?
Click to expand...
Click to collapse
yes works fine here

strikerdj2011 said:
yes works fine here
Click to expand...
Click to collapse
hey I could not find xposed module for oreo in magisk modules. how did u install?

It's in there, at least that's where I found and installed it.

yea its in there near the bottom

So don't you need a recovery for installing xposed with magisk?
I have my bootloader unlocked and I'm rooted with magisk, so can I just install xposed via magisk app? Without a soft-brick?

memocatcher said:
So don't you need a recovery for installing xposed with magisk?
I have my bootloader unlocked and I'm rooted with magisk, so can I just install xposed via magisk app? Without a soft-brick?
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-6/how-to/xposed-op-6-via-magisk-t3795581

SafetyNet Check in magisk failing

I have a rooted OP6 on 5.1.9. An app I want to use (blind) can somehow detect the fact that I'm rooted and won't let me use the app despite root being hidden from it in Magisk Hide. Upon investigating, I discovered my SafetyNet check in Magisk is failing.
It worked when I originally rooted it a few days ago. I do not have custom recovery or xposed.
Any ideas why safetynet check could be failing or how to go about troubleshooting it?

quantumcity said:
I have a rooted OP6 on 5.1.9. An app I want to use (blind) can somehow detect the fact that I'm rooted and won't let me use the app despite root being hidden from it in Magisk Hide. Upon investigating, I discovered my SafetyNet check in Magisk is failing.
It worked when I originally rooted it a few days ago. I do not have custom recovery or xposed.
Any ideas why safetynet check could be failing or how to go about troubleshooting it?
Click to expand...
Click to collapse
I had the same problem I uninstalled Xposed framework rebooted now the the safetynet check is Ok

airdi1 said:
I had the same problem I uninstalled Xposed framework rebooted now the the safetynet check is Ok
Click to expand...
Click to collapse
As I mentioned in the post, I do not have Xposed framework

quantumcity said:
I have a rooted OP6 on 5.1.9. An app I want to use (blind) can somehow detect the fact that I'm rooted and won't let me use the app despite root being hidden from it in Magisk Hide. Upon investigating, I discovered my SafetyNet check in Magisk is failing.
It worked when I originally rooted it a few days ago. I do not have custom recovery or xposed.
Any ideas why safetynet check could be failing or how to go about troubleshooting it?
Click to expand...
Click to collapse
What version of Magisk did you flash? Flash Magisk 16.4 only. Older versions don't support the OnePlus 6 and flashing newer versions has caused many weird problems. Flash Magisk uninstaller, reboot to TWRP, then flash Magisk 16.4. Once it gets going it will tell you that it can update the Magisk version. Let it update that way. Flashing newer versions causes many weird problems bit letting it update always seems to work.

run the uninstaller magisk .zip then check if safety net passed, might be something unrelated?
im on 5.1.9 with SN passing with TWRP and Magisk

tabletalker7 said:
What version of Magisk did you flash? Flash Magisk 16.4 only. Older versions don't support the OnePlus 6 and flashing newer versions has caused many weird problems. Flash Magisk uninstaller, reboot to TWRP, then flash Magisk 16.4. Once it gets going it will tell you that it can update the Magisk version. Let it update that way. Flashing newer versions causes many weird problems bit letting it update always seems to work.
Click to expand...
Click to collapse
I have magisk 16.7

virtyx said:
run the uninstaller magisk .zip then check if safety net passed, might be something unrelated?
im on 5.1.9 with SN passing with TWRP and Magisk
Click to expand...
Click to collapse
How do I do that? Do you have a link to this zip?

quantumcity said:
I have magisk 16.7
Click to expand...
Click to collapse
Google "Magisk uninstaller". Flash that file in TWRP. Then reboot to recovery. Then flash Magisk 16.4

quantumcity said:
How do I do that? Do you have a link to this zip?
Click to expand...
Click to collapse
its in the magisk official thread.

virtyx said:
its in the magisk official thread.
Click to expand...
Click to collapse
Yes

So for me, the safety net check passes in the Magisk app but I am not able to access Google tez which tells me that my device is rooted or custom ROM has been changed. Using Magisk v 16.0

16.4... notice the 4

Just fyi I'm on 5.19 and using Magisk 16.0 and safety net passes just fine. Use Google pay daily and play store shows certified.
I hide everything Google related in magisk hide just to be sure

Eric214 said:
16.4... notice the 4
Click to expand...
Click to collapse
I know. What I meant is safety net passes everywhere except for Google Tez app. Don't know why!

I have attached the screenshots below. And I understand that I'm using Magisk 16.0

skr975 said:
I know. What I meant is safety net passes everywhere except for Google Tez app. Don't know why!
Click to expand...
Click to collapse
Do you have it hidden in Magisk? Google Pay works here if you hide it.

Okay, so I have uninstalled magisk, don't have root, and I still can't use google pay, install netflix, use my bank's app, etc.
No root, no magisk, no xposed, no custom recovery.
How can I figure out why all these apps won't work?

quantumcity said:
Okay, so I have uninstalled magisk, don't have root, and I still can't use google pay, install netflix, use my bank's app, etc.
No root, no magisk, no xposed, no custom recovery.
How can I figure out why all these apps won't work?
Click to expand...
Click to collapse
In playstore / settings are you uncertified? After unlocking bootloader I was and couldn't use Google pay. I flashed magisk and it was still uncertified so I cleared playstore app data. Now the phone says certified and Google pay works for me.
I suggest you flash 16.4 magisk and clear app data in playstore to see if you can get them working. Also you will need a different app than magisk manager to check safety net ATM as it will come back with "invalid response"
Sent from my OnePlus6 using XDA Labs

Edxposed on S10e

I managed to root the device...but didn't have much luck with Edxposed yafa Has anyone managed to get Edxposed working on a S10e yet ? If so which variant

Tried both Variations on my SM-970F , YAHFA and Sandhook. Both hung up the phone at the Samsung logo

Edxosed Canary worked

On my S10e with BeyondROM V6.7 it works fine.
I have the following software istalled:
- Magisk 20.4
- Riru-Core v19.8
- Riru-EdXposed v0.4.6.2 (4529) (YAHFA)
- EdXposed Manager v4.5.7 (Enhancement mode)
The modules that I am using: AFWall+, XPrivacyLua

Same exact setup/config: Interested in knowing how you did it?!
gl000008 said:
On my S10e with BeyondROM V6.7 it works fine.
I have the following software istalled:
- Magisk 20.4
- Riru-Core v19.8
- Riru-EdXposed v0.4.6.2 (4529) (YAHFA)
- EdXposed Manager v4.5.7 (Enhancement mode)
The modules that I am using: AFWall+, XPrivacyLua
Click to expand...
Click to collapse
Its good to see evidence that some one with the device I have just purchased is using the same software loadout as I will be. So I have a few questions -
Regarding magisk install, how did you get this installed? or did you follow JohnWu's instructions on his magisk page..?
Also what recovery are you using, is it twrp and if so what version..?
In what sequence did you install magidsk, twrp, xposed..? Which thread/guide on XDA did you use/follow..?
are you able to reboot the phone normally? or if not why not and what are you work arounds?
is one of the fixes for rebooting, powering off/on the phone to flash Multi-disabler?
and lastly have you had any freezing of crashing issues related to Xposed or any Xposed modules..?
As your post is a few months ago and EdXposed, RiRu/, Magisk have been updated since then, what version are you currently running?

b1k3rdude said:
Its good to see evidence that some one with the device I have just purchased is using the same software loadout as I will be. So I have a few questions -
Regarding magisk install, how did you get this installed? or did you follow JohnWu's instructions on his magisk page..?
Click to expand...
Click to collapse
I followed the installation instructions from the BeyondROM thread. I also read many comments in that thread that clarified some doubts, but I don't remember exactly which messages.
b1k3rdude said:
Also what recovery are you using, is it twrp and if so what version..?
Click to expand...
Click to collapse
The BeyondROM requires installation of Ian’s latest patched TWRP. I used version 3.3.1-103. In order to install TWRP I followed the installation instructions in that thread and read many messages to clarify the instructions.
b1k3rdude said:
In what sequence did you install magidsk, twrp, xposed..? Which thread/guide on XDA did you use/follow..?
Click to expand...
Click to collapse
As indicated above, to install the TWRP, BeyondROM and Magisk I used the instructions in Ian's TWRP and BeyondROM threads. Several other messages inside the threads also helped, by I don't remember exactly which ones.
To install EdXposed I used Magisk Manager to download and install the following modules:
Riru-Core v19.8
Riru-EdXposed v0.4.6.2 *4529( *YAHFA)
Then I installed the APK EdXposed Manager v4.5.7 from this page https://github.com/ElderDrivers/EdXposedManager/releases
After restarting the phone, I installed some EdXposed modules from within the application and enabled them, which also required another phone restarting.
b1k3rdude said:
are you able to reboot the phone normally? or if not why not and what are you work arounds?
is one of the fixes for rebooting, powering off/on the phone to flash Multi-disabler?
Click to expand...
Click to collapse
I reboot the phone normally and it restarts in rooted system. This features is provided by BeyondROM and I didn't have to do anything extra.
b1k3rdude said:
and lastly have you had any freezing of crashing issues related to Xposed or any Xposed modules..?
As your post is a few months ago and EdXposed, RiRu/, Magisk have been updated since then, what version are you currently running?
Click to expand...
Click to collapse
I haven't experienced any freezes or crashes in all this time. The only modules that I installed are: AFWall+ and XPrivacyLua.
I haven't updated any software (TWRP, ROM, Magisk, EdXposed) and now there are more up to date packages of all of them.

Magisk 23 on Oneplus 8t oxygenos 12

Hi guys,
After I upgraded to Oxygen OS 12, I installed magisk by patching boot.img as usual. but when I boot it shows that bootloader and recovery are corrupted. is there any way I can install magisk23 on Oxygen OS 12.1? I need the magisk hied function.
Thanks,

zhihuiyuze said:
Hi guys,
After I upgraded to Oxygen OS 12, I installed magisk by patching boot.img as usual. but when I boot it shows that bootloader and recovery are corrupted. is there any way I can install magisk23 on Oxygen OS 12.1? I need the magisk hied function.
Thanks,
Click to expand...
Click to collapse
Try using Magisk 25.2 (latest stable).

BillGoss said:
Try using Magisk 25.2 (latest stable)
Click to expand...
Click to collapse
Hi,
Thanks for the reply. I will try but does magisk23 doesn't support oxygenos12 of android 12? I want to keep it because I want to use magisk hide.
Thanks

zhihuiyuze said:
Hi,
Thanks for the reply. I will try but does magisk23 doesn't support oxygenos12 of android 12? I want to keep it because I want to use magisk hide.
Thanks
Click to expand...
Click to collapse
25.2 can hide too.
Just enable zygisk and configure denylist.
For safetynet you can use universal_safetynet_fix and magiskhide_props_config modules.
Don't worry and have a try.
Just remember to backup before proceed.

IAAxl said:
25.2 can hide too.
Just enable zygisk and configure denylist.
For safetynet you can use universal_safetynet_fix and magiskhide_props_config modules.
Don't worry and have a try.
Just remember to backup before proceed.
Click to expand...
Click to collapse
Hi,
I have successfully installed magisk 25 on it. But if I use zygisk for some apps, a model such as xprivacyLua will not work. Using zygisk will disable all of models for the app that we enable zygisk right?

zhihuiyuze said:
Hi,
I have successfully installed magisk 25 on it. But if I use zygisk for some apps, a model such as xprivacyLua will not work. Using zygisk will disable all of models for the app that we enable zygisk right?
Click to expand...
Click to collapse
Check also article.
How to pass SafetyNet on Android after rooting or installing a custom ROM
It is possible to pass SafetyNet, even after extensive modding like rooting or installing a custom ROM. Check out how to do that here!
www.xda-developers.com

zhihuiyuze said:
Hi,
Using zygisk will disable all of models for the app that we enable zygisk right?
Click to expand...
Click to collapse
Nope, not likely... As someone is already doing that: [ https://forum.xda-developers.com/t/...android-privacy-manager.3730663/post-87416749 ].
In short, enable zygisk deny list means, hide root from those apps while keeping magisk modules functional.
But I'm not familiar with xprivacyLua... Sorry can't provide a detailed guide.