Hi all i present @resurrect kernel for Xiaomi Mi9T pro
Telegram Group Link:
Evira Kernel Group
https://t.me/joinchat/J447hFDMg4xFnKRwMLw3Og
This Kernel
Works on MIUI ANDROID P VERSION tested on Miui P
Works on Any AOSP Version Ex. Crdroid 5.9(not yet support will added soon)
Doesn't work on Miui Q Based Rom and aosp Q roms
---------------------------------------------------------------------
Installation instructions:
---------------------------------------------------------------------
1.flash zip for aosp
1.flash zip for miui if not boot than format data
Kernel Features:
---------------------------------------------------------------------
-Rebase all to source of @mslezak tx for your work
-Upstreamed to 4.14.151
-Added bloeffa wakeblock with prebuilt block list
-Battery tweak
-Fsync on/off
-Dynamic Fsync on/off
-governor alucardscheded added
-GPU 830mhz overclock - stable and smooth - most MIUI Dev based ROMs can enable via dialing *#*#8106#*#* - enable MaxFreq GPU Mode
-F2FS data and cache partition support
-ZRAM LZ4 data encryption enabled
-Adreeno Boost
-Klpase
-Usb fast charge
---------------------------------------------------------------------
Download:
Miui: https://mega.nz/#!fBRjwS6I!LeziyvLa6GuD1Er_RemY0hGMKLzsqE4-ZMcGKXPoeLg
Aosp:
https://mega.nz/#!mBBxSSaK!3JWkY67OVWRbQEUzUtIWaeEzPnrKiiUvVWMggAyJam8
--------------------------------------------------------------------
Source:
Evira Kernel Source
https://github.com/EviraKernel/Evira_Raphael_reborn
--------------------------------------------------------------------
Reserved
Screenshot and antutu score please
abdallah72 said:
Screenshot and antutu score please
Click to expand...
Click to collapse
Rom antutu dependes
Fk kernel manager skreenshots
Awesome so this kernel works on stock MIUI Android pie!!! Awesome been looking for a new kernel for stock MIUI that I'm running and it's been hard to find! Thanks...fixing to try on my mi 9t pro tonight, and will provide some feedback...thanks again!
Is battery idle mode supported by this kernel?
David_#27 said:
Is battery idle mode supported by this kernel?
Click to expand...
Click to collapse
What do you mean ? Hear wblocker provided for better idle drain
EpickBroVlad said:
What do you mean ? Hear wblocker provided for better idle drain
Click to expand...
Click to collapse
Take a look at these pictures from Advanced Charging Controller App(app from ACC manual module)!
Why do we have to format data after flashing it?
K20 pro work?
ghaf85 said:
K20 pro work?
Click to expand...
Click to collapse
That's what it's made for.
David_#27 said:
Take a look at these pictures from Advanced Charging Controller App(app from ACC manual module)!
Click to expand...
Click to collapse
Did u test that ,does that work?
Bharath kumar 007 said:
Did u test that ,does that work?
Click to expand...
Click to collapse
No... I'm just asking if it's supported by that kernel...
---------- Post added at 11:31 ---------- Previous post was at 11:28 ----------
whiteze said:
Why do we have to format data after flashing it?
Click to expand...
Click to collapse
I don't see any "format" instruction in the OP... The only reason it could be necessary is to convert data filesystem to f2fs!
David_#27 said:
No... I'm just asking if it's supported by that kernel...
---------- Post added at 11:31 ---------- Previous post was at 11:28 ----------
I don't see any "format" instruction in the OP... The only reason it could be necessary is to convert data filesystem to f2fs!
Click to expand...
Click to collapse
Now format data fixed
I tried the kernel, the phone hangs and can not use the touch. Forced to make an emergency stop, after that the phone blocks at startup. I followed the instructions and it does not work. Anyway thanks anyway for making a kernel that is easy to install.
abdallah72 said:
I tried the kernel, the phone hangs and can not use the touch. Forced to make an emergency stop, after that the phone blocks at startup. I followed the instructions and it does not work. Anyway thanks anyway for making a kernel that is easy to install.
Click to expand...
Click to collapse
Go in telegram group i'll try help
please share any mirror link...given link not working, and i am using raphaelin 10.3.5 stable build, can i flash this kernal ...
thanks in advance ?
AnduAnd said:
please share any mirror link...given link not working, and i am using raphaelin 10.3.5 stable build, can i flash this kernal ...
thanks in advance ?
Click to expand...
Click to collapse
Must work and files in telegram also
Just wondering, are we still waiting for android 10 kernel sources?
Related
Welcome to wilson3q's CM12 Unoffical Build!
I don't own a n7100, please help to test.
Disclaimer: I take no responsibility for bad things that happen as a result of flashing this.
All are pretty standard cm12 stuffs, except those patches I applied on top of them.
[Download]
ROM (please don't mirror)
build - 20150306
Gapp:
http://forum.xda-developers.com/par...apps-official-to-date-pa-google-apps-t2943900
Recommended launcher:
Nova Launcher (really like its JB zoom app animation, hate L slide up animation)
Recommended theme:
Deep Darkness
[Flashing Guide]
1. Reboot to CWM/TWRP recovery
2. Flash ROM zip file
3. Flash Gapps
4. Reboot
* Wipe data first if you come from another rom *
* Newer boot loader, modem and recovery is highly recommended (don't use twrp 2.8.4, use 2.8.1 instead) *
* No other kernel will be supported, use the stock one, for your best experiences too *
[Patches]
My additional patches over cm12 includes:
Enhancements and bug fixes cherry-picked from other ROMs, including Slim LP, Nameless, LiquidSmooth
SaberMod for ROM and kernel
O3, JustArchi optimization
Added Boeffla sound engine 1.67 (Get Boeffla Sound app to enable)
Added CPU governor zzmoove, smartassv2, savagedzen
Video playback forward/backward fix
Removed all kernel debuging stuffs
Fixed keyboard not showing up during setup wizard
Fixed Camera issue
Fixed Day Dream
Fixed Netflix streaming (one more reboot needed after installation of Netflix)
Fixed audio
Enabled Multi-user
LMK minfree tweaks
Misc tweaks
Changed DPI to 280
more...
For better experience, change Nova animation/scroll speed to Fast...
[Known Bugs]
I am not sure what issues you will get, but one thing is for sure: YOUR PHONE WILL FLY!
chrome glitch: type chrome://flags as URL and disable GPU thank @bigmarv31)
Thank cm team for the amazing ROM.
Special thanks to: @DerTeufel1980, @sbrissen, @rogersb11, @TheBr0ken...
Please help to test if baseband issue is fixed or not...
Thanks
Welcome on board mate
Awesome buddy one more flawless rom for our device....gr8 @wilson3q
Great news! I can't wait to try it! Thanks
20150227 build does not boot
mimmo13 said:
20150227 build does not boot
Click to expand...
Click to collapse
Clean install?
Logcat...plz.
wilson3q said:
Clean install?
Logcat...plz.
Click to expand...
Click to collapse
Clean install.... bootloop...
@wilson3q after note 2 logo, i have black screen and after 2/3 mins, the phone reboots.
Sorry , but i'm not able to do a logcat.
wilson3q said:
Clean install?
Logcat...plz.
Click to expand...
Click to collapse
Disable selinux, in kernel and make the trees permissive, refer to nameless git for the same. You kernel is crashing at boot, that's why logcat, dmesg or a kmsg is a no go.
̿ ̿̿’̿’\̵͇̿̿\з==(*͡° ͜ʖ ͡°)==ε/̵͇̿̿/’̿’̿ ̿ ̿̿*
Welcome on board !
Please tell us call recorder could works and loud with this rom !
KNIGHT97 said:
Disable selinux, in kernel and make the trees permissive, refer to nameless git for the same. You kernel is crashing at boot, that's why logcat, dmesg or a kmsg is a no go.
̿ ̿̿’̿’\̵͇̿̿\з==(*͡° ͜ʖ ͡°)==ε/̵͇̿̿/’̿’̿ ̿ ̿̿*
Click to expand...
Click to collapse
Already disabled..
Hard If no Logcat...
Can u try to use another kernel? See if any other issues...
I will look at the kernel again..
I tried with purecm and it seems to boot.
Edit: No Baseband
NisseCool said:
I tried with purecm and it seems to boot.
Edit: No Baseband
Click to expand...
Click to collapse
Ohh then dwnld and flash one from Androidwizzards thread...u will get BB working
Okay
New build up...
Try to see if can boot...
wilson3q said:
New build up...
Try to see if can boot...
Click to expand...
Click to collapse
It does boot.
nvm. It starts rebooting after it gets to setup wizard.
NisseCool said:
It does boot.
nvm. It starts rebooting after it gets to setup wizard.
Click to expand...
Click to collapse
Logcat?
Yannn said:
Welcome on board !
Please tell us call recorder could works and loud with this rom !
Click to expand...
Click to collapse
Not sure...I don't have a device to try.
thanks man! i'm gonna try it!
---------- Post added at 01:12 AM ---------- Previous post was at 01:05 AM ----------
[email protected] said:
Ohh then dwnld and flash one from Androidwizzards thread...u will get BB working
Click to expand...
Click to collapse
I have no baseband too.
Where i can find Androidwizard thread?
I had sold my Nokia X2 and stop support for Nokia X2
Hi all! Today, i was built a kernel with some tweak
and now i will share it to you
MK Kernel v1.0
Code:
Only for CM-11-20160111
Code:
Tweak:
-Added some CPU Governor: intellimm, intelliactive, optimax, intellidemand, conservative
-Added some I/O Scheduler: sio, zen, vr, fifo, sioplus
Code:
Download: [URL="http://d-h.st/AWXy"]http://d-h.st/AWXy[/URL]
Code:
Flashing:
download the .img, reboot to recovery, select: Install > Image > choose .img>Boot> slide right to flash > reboot system and enjoy
about CPU Governor and I/O Scheduler, read here for more information
Thanks to @zombah
Kernel version: 3.4.110
Compiled with Sabermod 4.7 Toolchain
Source: https://github.com/cm-nokia-x2
Up
Add some features to it, like double-tap to wake up support,init.d support,
is it good ???
how I can install it
Thanks bro
Wölveîne said:
Add some features to it, like double-tap to wake up support,init.d support,
Click to expand...
Click to collapse
of course. i'm trying to add this https://github.com/ryanaepple/android_kernel_motoe/commit/080003bc8e61349bf7c8da00fa6923f3c84d1927
Good Work! +Smartv2 governor
Could I flash this kernel for xperience ROM? Would I be able to get any benefits?
kaotd99 said:
of course. i'm trying to add this https://github.com/ryanaepple/android_kernel_motoe/commit/080003bc8e61349bf7c8da00fa6923f3c84d1927
Click to expand...
Click to collapse
Thnx,and make it more advance
And our kernal supports init.d? Or not
Wölveîne said:
Thnx,and make it more advance
And our kernal supports init.d? Or not
Click to expand...
Click to collapse
cm11's kernel is already support init.d. we don't need to add it more
kaotd99 said:
cm11's kernel is already support init.d. we don't need to add it more
Click to expand...
Click to collapse
Oky,then is it possible to get Native Move To Sd support via some modifications?
whether it can for another rom-based CM11?
user explaination please :cyclops::cyclops:
So whats now?,there's a new build 13 available-you need to recompile kernel for this build.and also viperfx,dolby digital plus too as in the new version there are several fixes in the framework!!
Wölveîne said:
So whats now?,there's a new build 13 available-you need to recompile kernel for this build.and also viperfx,dolby digital plus too as in the new version there are several fixes in the framework!!
Click to expand...
Click to collapse
in build no 13 I have tried DDP v2 and the old mod of disable internal memory and it did work for me
any one help me please
how I install this
sweezit92 said:
in build no 13 I have tried DDP v2 and the old mod of disable internal memory and it did work for me
Click to expand...
Click to collapse
It will work but there is a probability of low performance, bcz there are new framwork service. Jar etc if we flash old then it will be mixed with our new update.mixing old part of system with new ,not good
Wölveîne said:
It will work but there is a probability of low performance, bcz there are new framwork service. Jar etc if we flash old then it will be mixed with our new update.mixing old part of system with new ,not good
Click to expand...
Click to collapse
Yes i agree but as long we dont have updated file we cant use those features......that is why i mix these things
---------- Post added at 05:33 AM ---------- Previous post was at 05:32 AM ----------
Saged 22 said:
how I install this
Click to expand...
Click to collapse
Your question is not clear buddy....there are whole lot of things to install so which thing you want to install?
My SD card Could not be detected after I flashed this kernel?
shafiaszad said:
My SD card Could not be detected after I flashed this kernel?
Click to expand...
Click to collapse
use it without disable internal memory mod!
Note- Orginal threat can be found in Russian language, for those who dont know russian here is the threat in English,
This ROM has been developed for both the GT-S7272 model (dual-SIM) to the GT-S7270.
Latest Version: Daily
* ROM version daily build
* The list of the changes you see on the same page download The ROM is in beta! It can be used for daily use, but wait several errors.
What does not work?
- Restarts sudden.
- Possible errors more.
What works?
- Everything but what does not work
notes:
- Make backup by CWM before installing. EFS also copy the folder.
- To enable Root should go to the section of development options in settings and activate it .
- Do not let the phone is completely discharged, since the load only works above 5%. If you download completely, start in recovery mode and leave loading.
downloads :
ROM: https://jenkins.sandpox.org/job/LOGANXX_CM12.1/
FIX: https://www.androidfilehost.com/?fid=24438995911973064 (Fix the problem of brightness)
Gapps: http://opengapps.org/ (The gapps are the Google Apps) * In the link of the ROM, choose the version "logands" if you have the GT-S7272 * version * In the link of the gapps, choose the pack that best suits you*
Source: http://4pda.ru/forum/index.php?showtopic=673267&st=0
How to install?
1. Having ClockWorkMod 6.0.5.1 (also with TWRP can be installed)
2. Download ROM and gapps and put them on the SD
3. Enter Recovery Mode: Volume Up + Home + Power
3. Format / system & format / data (not required if installed over a previous build)
4. Wipe Data, & Dalvik Wipe Cache-Cache (only if the previous ROM is not the same version of CM)
5. Install from SD card, and seek the ROM.
6. Mount / system and install gapps
7. Accept, and will CM12.1 Android 5.1.1! enjoy
edit- thanks to dev:good::good:
screenshot: below
new build is up
link:- https://jenkins.sandpox.org/job/LOGANXX_CM12.1/
edit - In the link of the ROM, choose the version "logands" if you have the GT-S7272 * version *
Hello, thank y for the ROM!
stable or beta version?
Man Please send-me your tree
pickmod said:
Hello, thank y for the ROM!
stable or beta version?
Click to expand...
Click to collapse
well i must say its stable.
KYLEVE said:
Man Please send-me your tree
Click to expand...
Click to collapse
tree?? what's that.. dont ask me any kind of stuff like that.
yaseenarafath said:
tree?? what's that.. dont ask me any kind of stuff like that.
Click to expand...
Click to collapse
you compiled this rom?
KYLEVE said:
you compiled this rom?
Click to expand...
Click to collapse
dude, have you read the thread properly...make sure you read it. and comment.
its not perfect but THANK YOU very much for sharing
nassim20 said:
its not perfect but THANK YOU very much for sharing
Click to expand...
Click to collapse
its pretty stable for me no single bug yet i found
It's good but when I install gapps so many problem. What the version of gapps that I must download ? Link please
i get kernel panic frequently (since i started using custom roms).. should i update the kernel ? anyone has an update ? (s7272)
Hey guys! They release the newest build. Chrck it out!
---------- Post added at 08:24 PM ---------- Previous post was at 08:21 PM ----------
nassim20 said:
i get kernel panic frequently (since i started using custom roms).. should i update the kernel ? anyone has an update ? (s7272)
Click to expand...
Click to collapse
Yes. You should update your kernel. If kernel panick still occurs, you should re flash your stock rom with .pit and bootloader.
PAPalinskie said:
Hey guys! They release the newest build. Chrck it out!
---------- Post added at 08:24 PM ---------- Previous post was at 08:21 PM ----------
Yes. You should update your kernel. If kernel panick still occurs, you should re flash your stock rom with .pit and bootloader.
Click to expand...
Click to collapse
thnx for the update, this build fixed a problem i had :good:
still waiting for an updated kernel
nassim20 said:
thnx for the update, this build fixed a problem i had :good:
still waiting for an updated kernel
Click to expand...
Click to collapse
The latest build includes the updated kernel, including latest selinux patch. Try it and observe the phone if it still get an kernel panic.
i formatted-flashed the new rom-restored data (only) in TWRP: the kernel is in system right? so i didnt touch it
and i just had another kernel panic :/
nassim20 said:
i formatted-flashed the new rom-restored data (only) in TWRP: the kernel is in system right? so i didnt touch it
and i just had another kernel panic :/
Click to expand...
Click to collapse
Can you send the kernel panic log here? So we can review the logs here. To collect kernel logs, use this command in either adb or terminal and paste it here.
Code:
cat /proc/last_kmsg
i tried with terminal emulator : there's no such file right now.
i'll try next time
This ROM was in dex right? How can i optimize this rom with .oat included in system/app and /framework?
Hi everyone,
Thank you for the room.
May I ask a question ? Is that anyone knows how to have the function of "zooming" in camera app ? (with pinch on the screen or the volume button ) please
Thank you by advance for your replies
Spicateur-froyo
Hello Guys we are back with BaBa Baltkari kernel with the never Imagined OTG-Support
Features :-
1:- Governors :- ZZMOVE, ALUCARD,YANKACTIVE,DARKNESS
2:- I/0 Scheduler :- BFQ,NOOP,ETC
3- Thermal Balancing For Heat Issues.
4:- Intelli-plugs - Faux And Alucard
5:-OverClocked :- 1.6ghz
6:- GPU-Overclocked :- 465Mhz
7:- Faux Sound
8:-New Decompression Algorithm
9:-Selinux fixes
10:-OTG
11rimate ( Triangle Work-over cue ){Thanks to NamelessLOST} (Android Forums)
12:- Tweaked For Mokee Based Roms :cyclops:
13:- FastCharge
14:- Wifi Working!
Working Roms Reported So Far :-
1:- Mokee Roms all 32 bit
2:-Cm12.1 32bit by ed300
3:-MiUi (There Is bug When you Disconnect the Otg Cable the Device Reboots as Soon as The Flash storage is unmounted thanks to Indonesian Testers Looks Source of Huwai Honor 4X needs to be updated )
Join Our Development Group to Be a part of this Journey :-
Development Group :- https://www.facebook.com/groups/1558383554488300
Developer's Profile :- https://www.facebook.com/profile.php?id=100001674910795
Downloads :-
<MOD EDIT LINK REMOVED>http://d-h.st/7M9B
INSTRUCTIONS :-
1 - Flash Your Mokee 32 Bit rom
2 -Flash Gapps
3 - Flash Kernel
4 - Reboot
5- Profit
Instructions For cm12.1 By Ed300
1- Flash rom
2- Flash Gapps
3 Flash this Module https://userscloud.com/u1les4oq9uy3 thanks To @ED300
4- flash My Kernel
5- Reboot
Special Thanks to - @Tarun93 - His Helpful Tips - Tricks And Handy Git Without him this kernel was not possible @JavTeam - Kernel Source @FloroMu - Kernel Source
My Bro Sagar Adhikari Who tested and reported
our Development group for motivation
I will Upload my Source link later For you all to play with otg around
Future Plans :-
1:-Gpu oc -625
2:-More Governors
3:-WakeMods
XDA:DevDB Information
[KERNEL][BaBa ChamtKari][Mokee/cm12.1/miui(llp)][OTG][Over-Clocked][2.0], Kernel for the Lenovo A6000/Plus
Contributors
sdousbraviaenginelover, Sagar Adhikari, Tarun93
Source Code: https://github.com/lenovo-Kraft-T/android_kernel_lenovo_msm8916/tree/cm-12.1
Kernel Special Features: 1.otg 2.FastCharge 3.FauxSound 4.Best-Governors 4.Badly Tweaked 5.Charge Lover
Version Information
Status: Stable
Current Stable Version: 3.10.x
Stable Release Date: 2016-04-13
Created 2016-04-14
Last Updated 2016-04-16
Reserved
To use otg u must purchase a usb y cable as external power is needed filesystem supported :- fat32,ext4
My computer detects it as a virus.
Also how to flash, there is a executable file inside a .rar file.
no signature or image file?
X64 support? Kernel sources link?
Thanks working awesome.Appreciate your work...
-Sourav_8434
lolz Found Virus !!
Iqbal Ansari said:
My computer detects it as a virus.
Also how to flash, there is a executable file inside a .rar file.
no signature or image file?
Click to expand...
Click to collapse
U Must Have Downloaded the Wrong File there is Zimage And No executable File There Only Anykernel Scripts
And Press The Thanks Button
x64 Bit Why Not xD
crashdjent said:
X64 support? Kernel sources link?
Click to expand...
Click to collapse
I will Do x64 Bit Kernel As soon As I Get aleast 20 thanks On This Thread I worked hard And sources Will be Out Soon after the release of x64 Bit Kernel
Great work!
can you make some videos to demonstarte how the OTG works.
that will be awsome
proof Seeking I Know Its hard to Belive So SS For You
hezler said:
can you make some videos to demonstarte how the OTG works.
that will be awsome
Click to expand...
Click to collapse
Take This Enjoy Press the Thanks Too
sdousbraviaenginelover said:
Take This Enjoy Press the Thanks Too
Click to expand...
Click to collapse
well, currently im using cm12.1 64bit by satgass and telo's kernel and i also have that folder too...
videos proff will be great
thanks for your work
just to report bug
zram not working
and if i enable zram the kernel crash
Dude66 said:
thanks for your work
just to report bug
if i enable zram the kernel crash
Click to expand...
Click to collapse
may i ask what mokee are you use?
cause im bootloop lol.
hezler said:
may i ask what mokee are you use?
cause im bootloop lol.
Click to expand...
Click to collapse
ed300-cm12.1 withe kernel models support
Thanks For Reporting The Bug
Dude66 said:
thanks for your work
just to report bug
zram not working
and if i enable zram the kernel crash
Click to expand...
Click to collapse
I am Working On the Bug and will upload a New Build after its declared fixed
Press thanks if i were helpful
loop
hezler said:
may i ask what mokee are you use?
cause im bootloop lol.
Click to expand...
Click to collapse
If On Telo Mokee And Loop Clear Cache Dalvik Cache reboot
If on another mokee You need to wipe /system cache and Dalvik cache xD
Press thanks If I helpd
that is Bug due To the rom
Dude66 said:
thanks for your work
just to report bug
zram not working
and if i enable zram the kernel crash
Click to expand...
Click to collapse
People Reported That It is Working Good in Mokee Roms But For your Sake i can Compile Another from wt86518_defconfig which Is stock Defconfig
I Will Ping You when done
dude why dont u set the minimum frequency as 800mhz instead of 1.3
Sir I ain't Be Giving any proof if you are in indonesian group ask one of them for it
hezler said:
well, currently im using cm12.1 64bit by satgass and telo's kernel and i also have that folder too...
videos proff will be great
Click to expand...
Click to collapse
I will not be giving Proofs Well Why not you try it and Find Out Your self that would be Nice na
Press Thanks If I helped You
sdousbraviaenginelover said:
People Reported That It is Working Good in Mokee Roms But For your Sake i can Compile Another from wt86518_defconfig which Is stock Defconfig
I Will Ping You when done
Click to expand...
Click to collapse
thanks
just want let you know that god kernel doesn't has this issue withe this rom
IceCold Kernel
IceCold Kernel is a basic kernel for whyred (Redmi Note 5) that contains some special features and aims for best balance between performance and battery.
Features included
- Rebased to pie kernel source and caf base
- Merged Latest CAF Tag
- Implemented EAS (EM by tytydraco)
- top-app stune boost hardcoded to 1
- NTFS support
- Timer tick rate 80Hz
- Many things added to power efficient workqueue
- Update TAS2557
- schedutil default governor
- Sound control
- More sound improvements
- DTS Support
- Anxiety default I/O scheduler
- HDR support
- Charging Limiter
- Night Charge
- Use lpm parameters of sdm845
- Rapid GC for f2fs
- Simple Thermal
- Only wake GPU when needed (not on touch)
- TCP improvements
- Per-Process reclaim
- Remove debugfs
- Nearly complete VLA free
- Remove inefficient frequencies
- Simple Low Memory Killer
- Enable Idle Dynticks
- Other under the hood stuff
How to install DTS Sound mod
Credits to the developer and "porter" of this awesome sound mod
Issues
U tell me (got no issues with it, pretty stable)
Support
I only support Custom ROMs... It is working on MIUI but I won't fix issues for MIUI! (As example Kernelversion shows unavailable)
Also it's confirmed to work too on Mi6x (Wayne) but i won't support it officially because i don't own this device!
FlashingMake sure u backup ur current Kernel before flashing! I'm not taking responsibility for any damage!
If you installed a custom Kernel before please flash the boot.img of the currently installed ROM or dirty flash the ROM (I prefer dirty flashing)
Then just flash the zip file through TWRP...
And have fun with the full "IceCold Experience"
Download
Stable Builds
TestBuilds will be only available in Telegram Group!
If there are any questions, hints or something like that feel free to post them!
Or join Telegram Group
https://t.me/IceColdKernel
Credits:
srfarias - for the caf base
tytdraco- for his energy model
uvera - Helped implementing simple thermal
kerneltoast - for many improvements
kdrag0n - also many improvements
Information
IceCold Kernel for Redmi Note 5 Pro (aka whyred)
Contributors
lexx.ps (PrimoDev23)
Source Code: https://github.com/PrimoDev23/kernel_xiaomi_whyred
Version Information
Status: Stable Release
Created 2019-01-23
Last Updated 2019-06-26
I can confirm!!! The kernel is 100% working on mi 6x(Wayne) with F2FS.
Tnks..
ARNOB XENON said:
I can confirm!!! The kernel is 100% working on mi 6x(Wayne) with F2FS.
Tnks..
Click to expand...
Click to collapse
Ty for testing
Added the information in the thread
Can f2fs work with Xiaomi.eu or other miui roms?
kostas gp said:
Can f2fs work with Xiaomi.eu or other miui roms?
Click to expand...
Click to collapse
rom nees to support this as well as twrp and kernel.. theres one miui rom named Kosmos that supports f2fs
https://www.youtube.com/watch?v=x7RKyAd-scE
ARNOB XENON said:
I can confirm!!! The kernel is 100% working on mi 6x(Wayne) with F2FS.
Tnks..
Click to expand...
Click to collapse
W8 xd
How could u test? Anykernel will not install on wayne, it will cancel...
I didn't made the installer script compatible with wayne yet
Edit: Uploaded a stable version with some patches i've got working, should be smooth.
Also added wayne in the installer script so wayne users can flash it!
Keep in mind I don't officially support it
Good that you decided to start your own topic!
raptorddd said:
rom nees to support this as well as twrp and kernel.. theres one miui rom named Kosmos that supports f2fs
https://www.youtube.com/watch?v=x7RKyAd-scE
Click to expand...
Click to collapse
Thanks for answering
lexx.ps said:
W8 xd
How could u test? Anykernel will not install on wayne, it will cancel...
I didn't made the installer script compatible with wayne yet
Edit: Uploaded a stable version with some patches i've got working, should be smooth.
Also added wayne in the installer script so wayne users can flash it!
Keep in mind I don't officially support it
Click to expand...
Click to collapse
wired problem on wayne after reboot audio port is not working
ARNOB XENON said:
wired problem on wayne after reboot audio port is not working
Click to expand...
Click to collapse
As I mentioned I don't support this device. Try wiping cache and dalvik.
Reboot again won't fix?
Normal audio working?
BT-Audio working?
Otherwise I can't help u because i only have whyred and not wayne.
lexx.ps said:
As I mentioned I don't support this device. Try wiping cache and dalvik.
Reboot again won't fix?
Normal audio working?
BT-Audio working?
Otherwise I can't help u because i only have whyred and not wayne.
Click to expand...
Click to collapse
From 1st boot every thing works all audio after a reboot only headphone is not detecting.
ARNOB XENON said:
From 1st boot every thing works all audio after a reboot only headphone is not detecting.
Click to expand...
Click to collapse
Tried wiping caches?
I think it won't help but it's worth a try i think, else u have to switch kernel (eventually I will find a fix for it later)
Awesome kernel. Smooth for pubg..
alvinrs said:
Awesome kernel. Smooth for pubg..
Click to expand...
Click to collapse
It really is? Heard it has some issues on pubg
Edit: Should work, working on an update and trying some things
lexx.ps said:
Thanks for answering
Click to expand...
Click to collapse
is fsync enabled or disabled .?
raptorddd said:
is fsync enabled or disabled .?
Click to expand...
Click to collapse
Should be enabled, not sure but find it no where in config
Updated some Informations in OP!
thx for your work, there is no way to apply some configs on cpu section - kernel auditor?
EDIT: Nevermind, I was trying to change the settings on the schedutil governor.
Keep the good work, thx!
Is it this undervolt kernel stable ? I mean will it cause data loss (bootloop) or Sleep Of Death ? Thanks
Ale uto said:
Is it this undervolt kernel stable ? I mean will it cause data loss (bootloop) or Sleep Of Death ? Thanks
Click to expand...
Click to collapse
No it's fine, using it myself and never got bootloop or any problem with it