Database Info

[GUIDE] Fix device automatically rebooting after few seconds of booting.

If you are having a weird bootloop where the phone just reboots after few seconds of booting like shown here (https://www.youtube.com/watch?v=3YcWsWYQVGQ) then you're in the right place, here's how you can fix the issue.
Before proceeding make sure you know your risks as I am not responsible for bricked devices, dead SD cards, thermonuclear war and anything really.
Steps:
1) Download Mi Flash Tool and install it. (For the drivers, skip it if you have installed the drivers already)
2) Download and Install minimal ADB and Fastboot Tool, persist.img and temporary twrp.img links will be below.
3) Copy the persist.img to your internal storage.
4) Copy the recoveryxx.img to same folder where you've saved the minimal ADB/Fastboot tool.
4) Goto the minimal adb fastboot tool folder where you had put the recoveryxx.img
5) Open cmdhere.exe
6) Put your phone in fastboot mode (Volume - and Power)
7) Type the following commands:
- fastboot devices (you should something like this:
Fastboot dsad5454sfs, If not, re-install the the fastboot drivers correctly. )
- fastboot oem unlock (This is just for unlocking the bootloader you can just skip it if you have unlocked bootloader.)
- fastboot boot recoveryxx.img *(basically the filename of the image file.)
Now you will boot to the temporary twrp and once you're there follow these steps:
8) Open Terminal in TWRP Custom Recovery (go to “Advanced” > “Terminal”).
9) Type the following command:
- dd if=/sdcard/persist.img of=/dev/block/mmcblk0p27
10) Go to reboot and select system and that's it!
Voila!
Minimal ADB and Fastboot tool: https://forum.xda-developers.com/sho....php?t=2317790
Mi Flash Tool: http://c.mi.com/thread-235054-1-1.html
TWRP Recovery: https://forum.xda-developers.com/mi-a1/development/recovery-twrp-3-1-1-0-touch-recovery-t3688472 , download the recovery3/2x.img according the android version your on.
Persist(Using this persist.img file is a must) : https://xiaomifirmware.com/download-link/?dlm-dp-dl=7270

Couldn't flash, Error: This image isn't allowed download.

tajamulbaba said:
Couldn't flash, Error: This image isn't allowed download.
Click to expand...
Click to collapse
Have you unlocked the bootloader? If you have and it's showing that error then download the august fastboot ROM and use that persist.img.

Edwin Hamal said:
Have you unlocked the bootloader? If you have and it's showing that error then download the august fastboot ROM and use that persist.img.
Click to expand...
Click to collapse
Yes I've unlocked bootloader, August ROM is nowhere available.

tajamulbaba said:
Yes I've unlocked bootloader, August ROM is nowhere available.
Click to expand...
Click to collapse
Available here (first result of Google search for "mi a1 firmware").

_mysiak_ said:
Available here (first result of Google search for "mi a1 firmware").
Click to expand...
Click to collapse
Thanks for the link, I downloaded and extracted the persist.img, it still shows the error.

tajamulbaba said:
Thanks for the link, I downloaded and extracted the persist.img, it still shows the error.
Click to expand...
Click to collapse
Try other builds then, that occurs if the size of persist.img is different than what your partition allows. For most the August one should work.

Does this break SafetyNet?

No!
ltf_195 said:
Does this break SafetyNet?
Click to expand...
Click to collapse
Nooo. What even makes you think it does?

Could you update the persist file? mine stuck on oreo..
So basically is it working on any nougat build?

awandroid89 said:
Could you update the persist file? mine stuck on oreo..
So basically is it working on any nougat build?
Click to expand...
Click to collapse
I've updated the guide the new one works no matter what.

Edwin Hamal said:
I've updated the guide the new one works no matter what.
Click to expand...
Click to collapse
Hi..successful to flash the file on august firmware but problem still happen. Do you know why?

TWRP
tajamulbaba said:
Couldn't flash, Error: This image isn't allowed download.
Click to expand...
Click to collapse
Use the twrp method as in this thread:
https://forum.xda-developers.com/mi-a1/how-to/guide-how-to-restrore-persist-partition-t3765643
Had the same problem, used twrp

CoolPlushBear said:
Use the twrp method as in this thread:
https://forum.xda-developers.com/mi-a1/how-to/guide-how-to-restrore-persist-partition-t3765643
Had the same problem, used twrp
Click to expand...
Click to collapse
I've updated my method too.

could you explain why does this happens?

Help me.
IMEI= 0
How to fix it?

Step 7.1 adb devices
Step 7.2 adb push persist.img /sdcard
Worked in my case.
Thanks
---------- Post added at 03:12 AM ---------- Previous post was at 03:10 AM ----------
Now i need to fix my IMEI

...

this can not find file on twrp terminal how i can flash it

Can I re-lock bootloader?
Hi,
Flashing the persist.img seems to have resolved the issue for me also, once I have completed the steps in the guide can I re-lock the bootloader?
I assume as we didn't flash TWRP and only booted into it temporarily should be fine?
Thanks

[Recovery][Unofficial] TWRP 3.2.3 for XIAOMI MI A2 Lite (Daisy) 180818 [Wifi working]

Hello everyone,
I found a working recovery for our phone
here​
All credits go to
 @yshalsager for developing and uploading
and
 @yukimaru2215 for first linking
Bugs: Encryption not working - but stock rom boots up without encryption with a trick...
Attention: You will need to format data - all your data will be lost! Backup first!
How to install:
Tempearily root your device and modify fstab.qcom - this is needed to enable decryption
a) install fastboot and adb from here​b) load a prerooted kernel (patched bootimage) from here and copy it to your adb fastboot folder​c) boot to bootloader -> reboot and keep holding vol+ until you see "FASTBOOT"​d) Open command prompt, navigate to your adb fastboot folder and type in command prompt:
Code:
fastboot boot patched_boot.img
e) Go to apps, upgrade magisk manager, install any root explorer, grant root permissions and navigate to /vendor/etc/fstab.qcom​f) open fstab.qcom with texteditor and change "forceencryption=footer" to "encryptable=footer" and save​
[*]Install TWRP and wipe data backup everything first - this will wipe all your data
a) Download recovery form link above​b) copy extracted TWRP-3.2.3-daisy-1808.img to adb fastboot folder and type in command prompt​
Code:
fastboot flash boot TWRP-3.2.3-daisy-1808.img
c) Type in command prompt​
Code:
fastboot reboot
before hitting enter keep holding vol+​d) In TWRP you will get the message can´t read data -> skip decryption and go to "wipe" and "format data"​e) if you want to root your device you need now need to boot to bootlaoder (reboot -> bootloader) - if not, you done here. Reboot to system and setup your device​
[*]Root your device
a) You are in your bootloader... download patched_twrp from here and copy it to your adb fastboot folder​b) Type in command prompt​
Code:
fastboot boot patched_twrp.img
c) Boot up, upgrade Magisk manager and install magisk via manager -> choose "direct install"​
If you flash back a stock boot.img, you will loose your wifi functionality!
Enjoy!

thanks man
You can make a video soon

Noob dude.... And with this method, how is the steps for can update via ota the next updates?
Thx for this hard word and sorry my bad english!
Enviado desde mi Mi A2 Lite mediante Tapatalk

Testing official TWRP tonight. Some issues with decryption but will be resolved soon hopefully. Stay tuned!

d1ngh said:
Testing official TWRP tonight. Some issues with decryption but will be resolved soon hopefully. Stay tuned!
Click to expand...
Click to collapse
When will it be available?

dannyzamora said:
Noob dude.... And with this method, how is the steps for can update via ota the next updates?
Thx for this hard word and sorry my bad english!
Enviado desde mi Mi A2 Lite mediante Tapatalk
Click to expand...
Click to collapse
If you using Havoc 2.0, linke me, it's everything,you need! This twrp lets you boot up all treble GSI Roms....
And otas should be installed normal.
1. Uninstall magisk
2. Install ota, not reboot
3. install magisk
4. Flash twrp and boot up with patched twrp via fastboot
You never boot up without root... So everything's fine with modules and otas doesn't touch vendor and encryption...

brunoliveh said:
When will it be available?
Click to expand...
Click to collapse
When it's ready :silly: just be a little more patient won't be long now.

brunoliveh said:
When will it be available?
Click to expand...
Click to collapse
Hopefully by end of week, maybe earlier

i did every step here but after all the phone stuck on bootloop.
any idea why?

Voodoojonny said:
Hello everyone,
I found a working recovery for our phone
here​
All credits go to
@yshalsager for developing and uploading
and
@yukimaru2215 for first linking
Bugs: Encryption not working - but stock rom boots up without encryption with a trick...
Attention: You will need to format data - all your data will be lost! Backup first!
How to install:
Tempearily root your device and modify fstab.qcom - this is needed to enable decryption
a) install fastboot and adb from here​b) load a prerooted kernel (patched bootimage) from here and copy it to your adb fastboot folder​c) boot to bootloader -> reboot and keep holding vol+ until you see "FASTBOOT"​d) Open command prompt, navigate to your adb fastboot folder and type in command prompt:
Code:
fastboot boot patched_boot.img
e) Go to apps, upgrade magisk manager, install any root explorer, grant root permissions and navigate to /vendor/etc/fstab.qcom​f) open fstab.qcom with texteditor and change "forceencryption=footer" to "encryptable=footer" and save​
[*]Install TWRP and wipe data backup everything first - this will wipe all your data
a) Download recovery form link above​b) copy extracted TWRP-3.2.3-daisy-1808.img to adb fastboot folder and type in command prompt​
Code:
fastboot flash boot TWRP-3.2.3-daisy-1808.img
c) Type in command prompt​
Code:
fastboot reboot
before hitting enter keep holding vol+​d) In TWRP you will get the message can´t read data -> skip decryption and go to "wipe" and "format data"​e) if you want to root your device you need now need to boot to bootlaoder (reboot -> bootloader) - if not, you done here. Reboot to system and setup your device​
[*]Root your device
a) You are in your bootloader... download patched_twrp from here and copy it to your adb fastboot folder​b) Type in command prompt​
Code:
fastboot boot patched_twrp.img
c) Boot up, upgrade Magisk manager and install magisk via manager -> choose "direct install"​
If you flash back a stock boot.img, you will loose your wifi functionality!
Enjoy!
Click to expand...
Click to collapse
hay bro i'm now unlock boot loader and flash boot twrp.img its boot to recovery
i flash DisableForceEncryption_Treble.zip via twrp then flash patched boot.img to root via magisk good till now
i reboot to system and root my device and every thing is good now
but when try to enter twrp its go to stock recovery ok.
what i can to do now to get twrp and keep phone rooted too?
and what is different between twrp.img and twrp patched.img

elkhshap said:
hay bro i'm now unlock boot loader and flash boot twrp.img its boot to recovery
i flash DisableForceEncryption_Treble.zip via twrp then flash patched boot.img to root via magisk good till now
i reboot to system and root my device and every thing is good now
but when try to enter twrp its go to stock recovery ok.
what i can to do now to get twrp and keep phone rooted too?
and what is different between twrp.img and twrp patched.img
Click to expand...
Click to collapse
Hey, it's written above! You need to root with patched twrp linked above... Else you will loose twrp or wifi

Voodoojonny said:
Hey, it's written above! You need to root with patched twrp linked above... Else you will loose twrp or wifi
Click to expand...
Click to collapse
sorry let me step by step going
now i;m rooted what do second ?

Official is here:
https://forum.xda-developers.com/mi-a2-lite/development/official-twrp-daisy-t3855396

Voodoojonny said:
If you using Havoc 2.0, linke me, it's everything,you need! This twrp lets you boot up all treble GSI Roms....
And otas should be installed normal.
1. Uninstall magisk
2. Install ota, not reboot
3. install magisk
4. Flash twrp and boot up with patched twrp via fastboot
You never boot up without root... So everything's fine with modules and otas doesn't touch vendor and encryption...
Click to expand...
Click to collapse
Please explain by video

maorhag said:
i did every step here but after all the phone stuck on bootloop.
any idea why?
Click to expand...
Click to collapse
Sorry for responding so late... I had a bit of full calendar...
I just did this with another phone (I use these phones for my employies)... Idk, why it´s not working for you sorry. But meanwhile there´s a official twrp - this should do the trick!
Sorry for inconvinience

[TOOL][TWRP] EPR - Enchilada Partition Resizer [2.0.1][22.03.20]

Enchilada Partition Resizer for OnePlus 6!
What does this tool do? And what are the benefits? Well. This tool will resize Your system partition size to 6GB allowing You to flash any sGSI (some of them are huge) and my future roms that will require more than 3GB (2850mb roughly) system size. It's pretty problematic for many roms and I just delay them because of this.
DO NOT use it on 7 Pro, OP7 or anything else. (6T Tested and works)
I also added a backup feature of Your stock partition table just in case. Might be useful for some people.
Known Issues
You might get stuck in fastboot until You flash a ROM
How to Use:
MAKE SURE TO BACKUP EFS, DATA AND PERSIST (if possible) BEFORE USING IT!
Also make sure You're not currently using EPR! (If You already used 1.0 and Your system is still 6GB, no need for 2.0)
Boot into TWRP (Tested on BluSpark)
Flash EPR zip that matches Your storage
Reboot to bootloader (fastboot menu)
Run any force wipe flasher of a rom that You want to use.
Wait till it finishes flashing and done!
If You want to go back, simply flash EPR Remover and Format data + wipe system.
Download:
Enchilada Partition Resizer 2.0.1 TWRP Flashable
If You have any other problems, just ask here on XDA or for the fastest support PM me or ask someone in my group on Telegram
Join my group!
If You want to motivate me to work more, buy me a coffee!
https://www.paypal.me/protodevnano
Credits:
Alternative415 for testing 2.0 all day! :highfive:
Amir and Geci for testing and providing 256 and 64GB sizes!
Manan Gupta for Initial Windows version.
Adarsh for testing Windows version and having to use EDL 7 times
CosmicDan for original guide that helped me a lot!
OnePlus for creating OP6!
My friend Dylan for always supporting me
If I forgot anyone, just PM me on Telegram!
​
XDA:DevDB Information
Enchilada Partition Resizer, Tool/Utility for the OnePlus 6
Contributors
ProtoDeVNan0
Version Information
Status: Stable
Created 2019-09-01
Last Updated 2019-09-01

Changelog:
02.09.19 - Added Windows Support
22.03.20 - Corrected guide in EPR 2.

Added windows batch compatibility. Haven't tested on an android device but seems to work.
https://drive.google.com/file/d/1IS8cfD59okX9qwaXUKxxVQedNzmpHhmt/view?usp=sharing

its not working for me on windows. but thanks anywya

Can't get into TWRP after resizing (Windows) ?? Always reboot to bootloader.
EDIT ; Maybe doing wrong.. Will edit again soon.

WrathChild08 said:
Can't get into TWRP after resizing (Windows) ?? Always reboot to bootloader.
EDIT ; Maybe doing wrong.. Will edit again soon.
Click to expand...
Click to collapse
same for me. now im tring to unbrick my phone.

WrathChild08 said:
Can't get into TWRP after resizing (Windows) ?? Always reboot to bootloader.
EDIT ; Maybe doing wrong.. Will edit again soon.
Click to expand...
Click to collapse
synk48 said:
same for me. now im tring to unbrick my phone.
Click to expand...
Click to collapse
When You're in a fastboot lock, You have to check what partition is active and then set it as active again.
So on windows if You resize A. And end up in fastboot lock.
You should use
fastboot --set-active=
(It will show You current slot)
and then
fastboot --set-active=a
If Your slot is a.
I have no idea why this happens but oh well. One day we will have 3 slots so let's appreciate 2 :silly:

Gonna try this to install OP7 Android 10 Rom Port, thanks. I Was on it all night long wondering why I couldn't make it working.
EDIT : Still stuck in fastboot mode even after typing fastboot --set-active=a (I resized a, yep), can't go to recovery. But maybe it's related to Android Q ? was on Q DP3 before resizing. Or Maybe it's because the OP7 ROm Port is hard to install aha. After cheking, system is 6Gb size so I guess your software is okay.

WrathChild08 said:
Gonna try this to install OP7 Android 10 Rom Port, thanks. I Was on it all night long wondering why I couldn't make it working.
EDIT : Still stuck in fastboot mode even after typing fastboot --set-active=a (I resized a, yep), can't go to recovery. But maybe it's related to Android Q ? was on Q DP3 before resizing. Or Maybe it's because the OP7 ROm Port is hard to install aha. After cheking, system is 6Gb size so I guess your software is okay.
Click to expand...
Click to collapse
follow this steps
if you are stuck in bootloader bootloop do this
1. msm download tool than back to OOS 5.1.11
2. unlock bootloader
3. manual update to OOS Q DP3
4. install patched boot to get magisk without root there you can find partched boot.img https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853
4. this step is because android Q dont let you boot to TWRP by bootloader
5. install TWRP Zip with magisk
6. boot to recovery and open ERP Script to resize your partition and chose partition a
7. in bootloader put fastboot set_active b and then boot to recovery
8. select partition a
9. do a factory reset, wipe data
10. boot to bootloader
11. open OP7 Android 10 Port scrip
12. in bootloader put fastboot set_active a
13. done
if you phone still doesnt boot go to bootloader set_active b go to recovery, chose partition a in twrp and do a factory reset and wipe data again and reinstall OP7 port.
is the only way its worked for me. i hope it works for you.
sorry about my english.

The command window just vanishes after typing in the partition and hitting enter. Have tried entering both `a` and `b` and even tried running the batch file as an administrator. Anyone else facing this issue on Windows?

you forgot to type 'system'

sahu.prashant said:
The command window just vanishes after typing in the partition and hitting enter. Have tried entering both `a` and `b` and even tried running the batch file as an administrator. Anyone else facing this issue on Windows?
Click to expand...
Click to collapse
you wrote system first and next the partition letter?

synk48 said:
you wrote system first and next the partition letter?
Click to expand...
Click to collapse
LMAO I feel stupid. I just typed in the letter. :silly:

synk48 said:
follow this steps
if you are stuck in bootloader bootloop do this
1. msm download tool than back to OOS 5.1.11
2. unlock bootloader
3. manual update to OOS Q DP3
4. install patched boot to get magisk without root there you can find partched boot.img https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853
4. this step is because android Q dont let you boot to TWRP by bootloader
5. install TWRP Zip with magisk
6. boot to recovery and open ERP Script to resize your partition and chose partition a
7. in bootloader put fastboot set_active b and then boot to recovery
8. select partition a
9. do a factory reset, wipe data
10. boot to bootloader
11. open OP7 Android 10 Port scrip
12. in bootloader put fastboot set_active a
13. done
if you phone still doesnt boot go to bootloader set_active b go to recovery, chose partition a in twrp and do a factory reset and wipe data again and reinstall OP7 port.
is the only way its worked for me. i hope it works for you.
sorry about my english.
Click to expand...
Click to collapse
after step 3 fastboot commands dont work, flashing twrp fails

Makhosi Mayisa said:
after step 3 fastboot commands dont work, flashing twrp fails
Click to expand...
Click to collapse
i sent you a PM...

synk48 said:
i sent you a PM...
Click to expand...
Click to collapse
Can you share?

Rishwan said:
Can you share?
Click to expand...
Click to collapse
what do you need?

synk48 said:
what do you need?
Click to expand...
Click to collapse
Same as above. I get the same error. Can't make EPR work, I end up in bootloader bootloop.

Rishwan said:
Same as above. I get the same error. Can't make EPR work, I end up in bootloader bootloop.
Click to expand...
Click to collapse
tell me what are you doing? step by step

synk48 said:
tell me what are you doing? step by step
Click to expand...
Click to collapse
tried a lot of ways.
1) MSM to go to 9.0.8
2) unlock bootloader and install twrp
3) boot twrp (with 9.0.8)
4) install dp 3 + twrp, reboot to recovery and repeat for both slots
5) on slot A, run EPR
6) at fastboot with no other way except to use msm because no command (such as set_active) makes it boot. at this point, i can't even go to recovery/bokt recovery (as Q doesn't support boot command)
method 2)
repeat the same except i ran EPR with 9.0.8 same issue. goes to bootloader always

POCO F1 stuck on Oreo FIX

This is for POCO F1 users who have softbricked their phones and now stuck on Oreo. If they flash any other rom it will simply go to fastboot rather than booting. Just follow the below steps to fix yours.
Step 1 : Root your Oreo rom using magisk.
Step 2 : Boot into rom and install Lanthanum System toolbox
Step 3 : Open the app and give root privileges
Step 4 : Go to menu and scroll to partion settings
Step 5 : Scroll to dtbo
Step 6 : Click on it and select flash
Step 7 : Select the dtbo.img attached and flash it. ( If you get trouble while selecting or if it's crashing select from another file explorer.)
Step 8 : Reboot and then you can flash any rom like you used to.

Thanks a lot mate ! It Worked

bro im not able to install aex 8.0 A11 please help me

Fall3nSama3l said:
This is for POCO F1 users who have softbricked their phones and now stuck on Oreo. If they flash any other rom it will simply go to fastboot rather than booting. Just follow the below steps to fix yours.
Step 1 : Root your Oreo rom using magisk.
Step 2 : Boot into rom and install Lanthanum System toolbox
Step 3 : Open the app and give root privileges
Step 4 : Go to menu and scroll to partion settings
Step 5 : Scroll to dtbo
Step 6 : Click on it and select flash
Step 7 : Select the dtbo.img attached and flash it. ( If you get trouble while selecting or if it's crashing select from another file explorer.)
Step 8 : Reboot and then you can flash any rom like you used to.
Click to expand...
Click to collapse
thank you so much bro finally im able to install a custom rom . i installed dtbo.img by fastboot method

Babu4886 said:
thank you so much bro finally im able to install a custom rom . i installed dtbo.img by fastboot method
Click to expand...
Click to collapse
How?

rdjaat said:
How?
Click to expand...
Click to collapse
Just flash through fastboot command "fastboot flash dtbo dtbo.img" simple. You don't need to first flash Oreo rom or root device .I simply flashed it by fastboot and then installed twrp then flashed a custom rom corvus os 10.5

Babu4886 said:
Which firmware are u using
Click to expand...
Click to collapse

Corvus os

Babu4886 said:
Corvus os
Click to expand...
Click to collapse
bro i did the same my phone was stuck on permanent fastboot but when i try to flash miui 12.0.3 ofiicial through twrp or mi flash tool error comes which never did and i want to go to stock rom as i need to sell my phone

Previously my cellphone was in a custom ROM, I installed a module that used dtbo in it, while my cellphone didn't support it, finally my cellphone could live with the MIUI ROM
10 android 8(oreo), can I use the method above to use a custom rom again?

PanjiAja03 said:
Previously my cellphone was in a custom ROM, I installed a module that used dtbo in it, while my cellphone didn't support it, finally my cellphone could live with the MIUI ROM
10 android 8(oreo), can I use the method above to use a custom rom again?
Click to expand...
Click to collapse
https://t.me/poors_i_fone/165994 Here Download this dtbo.img
Download platform tools if using windows 7 or higher
open cmd
put phone in fastboot mode
type: 'fastboot flash dtbo dtbo.img'
this will fix everything... just reboot device
and make sure you dont end up flashing some trash files for your device... and fix this issue via edl or paying to xyz people. stay safe!

lakshhhhhh said:
https://t.me/poors_i_fone/165994 Here Download this dtbo.img
Download platform tools if using windows 7 or higher
open cmd
put phone in fastboot mode
type: 'fastboot flash dtbo dtbo.img'
this will fix everything... just reboot device
and make sure you dont end up flashing some trash files for your device... and fix this issue via edl or paying to xyz people. stay safe!
Click to expand...
Click to collapse
is it possible to flash the dtbo.img file after flashing the twrp and install the custom rom?

PanjiAja03 said:
is it possible to flash the dtbo.img file after flashing the twrp and install the custom rom?
Click to expand...
Click to collapse
bro is your phone stuck on fastboot completely?? dm me at telegram
𝗣𝗥𝗘𝗗𝗔𝗧𝗢𝗥 𝗢𝗦™ | 𝗣𝗢𝗖𝗢 𝗙1
💥PREDATOR OS = GAMING + BB💥 #POCO F1 (Beryllium) CUSTOM ROMS (MODS + PORT) Got Banned Join - @SorryIDidWrong Join Our Official Channel @predators_hotlist For Logs Join @logs_of_poors_i_fone
t.me

Infinix Hot 9 Play TWRP Recovery & ROOT

[AIO Guide] Bootloader unlocking, Root ,Twrp , Custom Rom & Stock Firmware]​ NOTE :unlocking bootloader wipe your data
Root at your own risk
I am not responsible for any data loss or brick
# Twrp recovery for hot 9 play
Device- Infinix Hot 9 play
Model & Variant :
1: X680B
2: X680F
3: X680
1.Bootloader Unlocking Guide:
1. Download & install ADB driver
2.Enable devloper mode by taping on Build verson(setting->my phone) then enable Oem Unlock & usb debugging from (settings->System->Devloper option)
3.Now connect device & open ADB path & run cmd
command: ADB devices
then reboot to bootloader
command: ADB reboot bootloader
4. unlock bootloader
command: fastboot flashing unlock the phone will ask to confirm
5. now reboot to system
command:fastboot reboot
If you are stuck waiting for the device screen
2.1 TWRP [Official]
https://forum.xda-developers.com/t/custom-recovery-infinix-hot-9.4462331/
3. Root:
## Root zip link: Magisk-v21.0.zip
## Unroot link : Magisk-uninstaller-20201003.zip
4. Orange state disabler:
Flashing guide & zip file
Click Wipe →Format Data → Yes → Press Enter.
Then Click Reboot → Recovery (Reboot to Recovery ).
After this, TWRP Recovery Mode will be installed on your phone
Link::Orange disabler.zip
5. Gsi Rom / Custom Rom Install guide & link:
https://forum.xda-developers.com/t/custom-rom-dynamic-partition-arm64-ab.4379341/
6. Phone Hard Brick fix / Flashing guide & tools :
https://forum.xda-developers.com/t/phone-soft-brick-phone-on-off-poblem-tecno-device.4378501/
6.1. Stock Firmware Files / Flash file
## Download link :
01 : X680B ( Variant ) :
X680B-H6215EFIJ-Q-OP-211130V265
X680B-H6215EFIJ-Q-OP-211015V263
X680B-H6215EFIJ-Q-OP-210804V255
X680B-H6215EFIJ-Q-OP-220215V277
02 : X680F ( Variant ) :
X680F-H6116P-Q-OP-210313V223
X680F-H6116P-Q-OP-200826V98
03 : X680 ( Variant ) :
X680-H6116DE-QGo-OP-200521V290
Hit Thanks If You Liked My Work

Thanks mate, my x680b was already rooted and I've been waiting for a custom recovery for almost a year. Searching on Google, Hovatech, and XDA time to time and finally yesterday I saw your post. The recovery works . Hopefully we'll see Android 12 for x680b too .

immi said:
Thanks.
Click to expand...
Click to collapse
gsi install gruide & link : page link
recommend:v400.e PixelExperience_arm64-ab-12.0-20211226-UNOFFICIAL

Parvej789 said:
gsi install gruide & link : page link
recommend:v400.e PixelExperience_arm64-ab-12.0-20211226-UNOFFICIAL
Click to expand...
Click to collapse
Thanks for more info but I think x680b is A only (not AB). Recommend a gsi that you've tested personally (if you have tested any)
EDIT: Also if you have any flashable to remove Orange State at boot would be a great favour.
EDIT 2: TWRP is unable to backup current rom or flash any .zip cause it can't access internal storage or mount partitions.

immi said:
Thanks
Click to expand...
Click to collapse
tested post
dynamic TWRP recovery fully does not work. Because your phone is super.img partition(System Product vendor not r w). any img file flash and buckup working. This phone ab system_root.
teble info.apk install-check this phone info.
Orange state disabler:
Flashing guide & zip file
Click Wipe →Format Data → Yes → Press Enter.
Then Click Reboot → Recovery (Reboot to Recovery ).
After this, TWRP Recovery Mode will be installed on your phone
Link:Orange disabler.zip
gapp Gsi install: PC to command (twrp flash not work Because system size is low)
Vanlina gsi install to twrp (An 12 gsi flash twrp. but twrp not boot )
this phone dynamic arm64 ab work (normal arm64 ab not work)
any problem to fastboot full flash stock ROM

Parvej789 said:
tested post
dynamic TWRP recovery fully does not work. Because your phone is super.img partition(System Product vendor not r w). any img file flash and buckup working. This phone ab system_root.
teble info.apk install-check this phone info.
Orange state disabler:
Flashing guide & zip file
Click Wipe →Format Data → Yes → Press Enter.
Then Click Reboot → Recovery (Reboot to Recovery ).
After this, TWRP Recovery Mode will be installed on your phone
Link:Orange disabler.zip
gapp Gsi install: PC to command (twrp flash not work Because system size is low)
Vanlina gsi install to twrp (An 12 gsi flash twrp. but twrp not boot )
this phone dynamic arm64 ab work (normal arm64 ab not work)
any problem to fastboot full flash stock ROM
flash but phone not on: When you turn on the phone, the phone shuts off in 2 to 5 seconds. Hold down the volume button on the bottom of the phone and press the power button, release the pressed button as soon as it is turned on. Witt phone on.
problem fixed: vendor img flash problem fixed
Click to expand...
Click to collapse
treble gsi comes in .img.xz extension, I don't know how to flash this on dynemic partition. if you can show me the way, please do it.

cmcd comannd installed succesfully...
when i use comand fastboot reboot recovery ,
error with unkonw reboot recovery...do have solution ..with other comand

charlis88 said:
cmcd comannd installed succesfully...
when i use comand fastboot reboot recovery ,
error with unkonw reboot recovery...do have solution ..with other comand
Click to expand...
Click to collapse
fastboot reboot & quickly Hold up volume button click phone .
boot to recovery

immi said:
treble gsi comes in .img.xz extension, I don't know how to flash this on dynemic partition. if you can show me the way, please do it.
Click to expand...
Click to collapse
img.xz uncompresing and gsi img rename to system.img.
vanlia gsi system.img to twrp flash
gapp gsi system img to cmd flash(https://forum.xda-developers.com/t/custom-rom-dynamic-partition-arm64-ab.4379341/ )

Parvej789 said:
fastboot reboot & quickly Hold up volume button click phone .
boot to recovery
Click to expand...
Click to collapse
I got it...thanks Mate....
Not bug work good like normaly...
thanks for you job DEV . . .

Custome recovery was ready....i hope in future will be release custome rom Base AOSP . . . .
Thanks
XDA and all Dev . . .God bless All you Job

charlis88 said:
Custome recovery was ready....i hope in future will be release custome rom Base AOSP . . . .
Thanks
XDA and all Dev . . .God bless All you Job
Click to expand...
Click to collapse
2. Gsi Rom / Custom from Install guide & link:
https://forum.xda-developers.com/t/custom-rom-dynamic-partition-arm64-ab.4379341/

my touchscreen dead in twrpmode
any solution?
thanks for your help

rihuym;ls said:
my touchscreen dead in twrpmode
any solution?
thanks for your help
Click to expand...
Click to collapse
Your phone build number

Parvej789 said:
Your phone build number
Click to expand...
Click to collapse
X680B-H6215EFIJ-Q-OP-211130V265

rihuym;ls said:
X680B-H6215EFIJ-Q-OP-211130V265
Click to expand...
Click to collapse
Otg to mouse used TWRP work

Parvej789 said:
Otg to mouse used TWRP work
Click to expand...
Click to collapse
Can you kindly explain that sir
Im beginner here

rihuym;ls said:
Can you kindly explain that sir
Im beginner here
Click to expand...
Click to collapse
I've tried that and not working,

Wait some time

rihuym;ls said:
I've tried that and not working,
Click to expand...
Click to collapse
Wait some time