QC Fast charge adapters/Battery Banks - OnePlus 7 Pro Questions & Answers

I'm new to One Plus... I have an anker external power bank and a rav power bank both with dedicated Qualcom Quick charge ports and anker charging station... Also have QC Samsung chargers too...
Are we all using these charges with the One Plus Pro 7? I know it won't support the speeds but is the phone intelegent enough not to break when charging with these chargers?

I'm using a QC 3.0 charger with OP 7 Pro. It works without problems. Only the phone charges slower than using Warp Charge.

Related

Quick charge compatible car chargers

Looks like the Note 4 comes with a 2A charger. I imagine this is all we would need in a car charger to support the quick charging?
Nope. The charger has some type of 9 volt mode to facilitate the quick charge, apparently.
Sent from my SGH-T999 using Tapatalk
You'd need a special Samsung charger. The one that comes with the Note 4 has dual modes. It will charge at 9V 1.67A up to 50%~ and then switch over to the regular 5V 2A.
Here are the Quick Charge 2.0 compatible devices & accessories: https://www.qualcomm.com/news/snapdragon/2014/06/04/quick-charge-20-has-arrived
pauley said:
Here are the Quick Charge 2.0 compatible devices & accessories:
Click to expand...
Click to collapse
So, has anyone tried the ones not listed by Samsung or Qualcomm? Amazon has both Anker and Verizon for about $10 or $12 that are 2 or 2.1 amp. I know they probably don't do what the officially compatible ones do but they'd be better than the old Sprint thing I have been using for 5 years, right? It's probably 1 amp or less. I need a new charger but not necessarily fully-compatible until they get cheap like this stuff I am seeing.
If you want the fast charging in your car you need to buy one that is Quick Charge 2.0 capable.
I tried 10W car charger from Samsung and it charged from about 60 % 1% every minute up to 75 % while testing it. But it isn´t really fast charging technology or?
Kawaisa said:
You'd need a special Samsung charger. The one that comes with the Note 4 has dual modes. It will charge at 9V 1.67A up to 50%~ and then switch over to the regular 5V 2A.
Click to expand...
Click to collapse
Where did you get this information re 50%?
When mine passes 50% it continues to quick charge according to the battery stats I have obtained on my device.
I imported a number of the Incipio car chargers to the UK. They are excellent but not cheap!

Powerbank that support Quick Charge 2.0

Any good powerbank out there. At least a 10000 mah above.
To be able to use fast charging feature in Note 4.
Actually that sounds like it would be really cool if it exists, I'd also be interested in knowing if there's a powerbank that supports quick charge. I've held off on picking up a powerbank for a while now, but if something like this is even possible it would probably get me interested, it'd be pretty awesome to be able to just plug in to a backup battery and have it charge up the phone with quickcharge speed ;P I wouldn't be surprised to find out it's not possible though... Anyone know?
Think the dual voltage 5 and 9 volt needed for quickcharge wil be a problem to design a powerbank with a feature like that. I don't say it's impossible but probably won't be cheap or small formfacfor
Yea. Is cool if fast charge powerbank then bring out to fast charge note 4. Lol.
There is this compact power bank (and it supports quick charging itself within 3 hours - via 2.1A input - at least on paper)
APE MP5200Q on Alibaba (not aliexpress)
Weight: 132g
Input: 5V/2.2A
Outport: 5V/3.5A,9V/1.5A,12V/1.5A
3 output ports: 2 USB ports and 1 built-in micro USB cable
Over-charge/discharge, over-current,short protection
Quick Charge output port: output 9V/1.5A or 12V/1.5A on Quick Charge state
Battery Cell type: Samsung Li-ion 18650
Quick charge 2.0: Class A
and it looks good too!
the only missing thing to make it a perfect power bank, would be 15W wireless charging capability...
Please everyone do say what Power bank you have
& how much time does it take to fully charge a Drained battery
So we know which charges how many times, Once or twice or more ....
Thank you all
I have aukey quick charge the silver 10400mah model its charge lg g4 same as qc2.0 wall charger I have mah meter
I also have an aukey but the PB-T2 model 12000mAh. Have quick charge USB outlet and also a normal 1A USB outlet. Has a 2A microusb input for charging an a so-so LED light built in. A bit heavy and slightly longer than the Note 4 in size. Cons: I would have preferred a 2.1A instead of the 1A USB outlet for fast charging other non quick charge devices.
yosef019 said:
I have aukey quick charge the silver 10400mah model its charge lg g4 same as qc2.0 wall charger I have mah meter
Click to expand...
Click to collapse
As above Aukey Quick Charge 2.0 external battery packs are pretty good. They do them in different sizes and go above 10000mah
BlitzWolf looks good.
banggood.com are doing pre order, to be sent out 20th November.
From a store rep..
We use the newer chip FP6600 that not only supports QC but also standard fast charging, the Aukey does charge at QC speeds with their THY100 but will not fast charge other devices such as your iPhone at fast speeds. BlitzWolf's newer IC provides compatibility beyond just QC devices. The battery of the BlitzWolf is is LG and also of a higher standard than Aukeys domestic Chinese brand batteries. In terms of safety and compatibility this is one step ahead of Aukeys 6 month old version.
Click to expand...
Click to collapse
Use coupon "12blitzw" for 12% off.. (Don't know when it ends)
I am using Aukey Power Bank with 15000maH.
Supports Quick Charge and PowerBank itself charges as Quick Charging.
jianrong said:
Any good powerbank out there. At least a 10000 mah above.
To be able to use fast charging feature in Note 4.
Click to expand...
Click to collapse
Hmm... we have Note 4's a removable battery is more compact and supports quick charge. Just have to get a battery charger that supports it. There would also be less power loss because it would be more efficient than transferring energy from one battery to another. Just my opinion.

Car charger (non-wireless) w/ quick charge?

Any suggestions? I'm looking for something that can do the quick charging in the car, is that even possible? Can it be done with a dual port so my wife and I can use the quick charger at the same time?
http://www.amazon.com/Charger-PowerIQ-Technology-Samsung-Motorola/dp/B00M43S18Y/ - Would this one support quick charging in the car?
Also,
http://www.amazon.com/Anker®-Extra-Premium-Android-Samsung/dp/B00NPP7TVU
This is basically the same cable that came with my S6 just longer correct? The included cable is too short to plug in near my night stand.
Any charger that is a 2amp charger... and any cable.. i have tried all my old cables on the s6 charger... all allow fast charge... and its charger is 2amp.... same as nexus 7 and all other newer devices... so just go with a 2 amp charger and enjoy the fast charge. And yes they make dual port 2 amp chargers... usually 1 port is 2 amp and second one is like 1 or 1.4amp... i have 2 cheap ones from amazon myself... will test them with the phone tomorrow and update you.
Comando156 said:
Any charger that is a 2amp charger... and any cable.. i have tried all my old cables on the s6 charger... all allow fast charge... and its charger is 2amp.... same as nexus 7 and all other newer devices... so just go with a 2 amp charger and enjoy the fast charge. And yes they make dual port 2 amp chargers... usually 1 port is 2 amp and second one is like 1 or 1.4amp... i have 2 cheap ones from amazon myself... will test them with the phone tomorrow and update you.
Click to expand...
Click to collapse
any cable will work, but not every 2.0A charger will work. i tested it with a 2.0A (not the Samsung one) charger and "fast charging" did not show up in the phone.
AFAIK, you have to use one of Samsung's OEM chargers or one capable of the Quick Charge 2.0 standard for adaptive fast charging.
OP, i only did a cursory search, but i found this dual Quick Charge 2.0 charger that might meet your needs: http://www.amazon.com/dp/B00TGD79X8?psc=1
Interesting, I didn't think to check for QC 2.0. I was thinking the Anker one did that. Thanks!
That being said though, anyone have experience with any of them with how they hold up?
Verizon sells one, it is their generic branding, it's the only one that I have seen or tried that is marketed that it is QC 2.0, works great even has a built in LED flash light basically. Sucks that it is $34.99 though.
http://www.verizonwireless.com/accessories/verizon-vehicle-charger-with-fast-charge-technology-for-micro-usb/
From my understanding Quick Charge 2.0 is a Qualcomm Snapdragon 801 (or newer) processor feature. The Galaxy S6 is running Samsung's Exynos 7420 processor which features Adaptive Fast Charging. I don't know how they vary in terms of performance, but I do know that when I plug in my Quick Charge 2.0, my S6 recognizes it as a fast charger. Battery went from 40% to 63% in 13 mins so I'm assuming both charging standards are compatible lol..
Try this car charger, worked great for my Qualcomm based phones.
http://www.amazon.com/gp/product/B008VMP90A/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1
th3b055 said:
From my understanding Quick Charge 2.0 is a Qualcomm Snapdragon 801 (or newer) processor feature. The Galaxy S6 is running Samsung's Exynos 7420 processor which features Adaptive Fast Charging. I don't know how they vary in terms of performance, but I do know that when I plug in my Quick Charge 2.0, my S6 recognizes it as a fast charger. Battery went from 40% to 63% in 13 mins so I'm assuming both charging standards are compatible lol..
Try this car charger, worked great for my Qualcomm based phones.
http://www.amazon.com/gp/product/B008VMP90A/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1
Click to expand...
Click to collapse
i'm reasonably sure it's the same standard. the Note 4 (Snapdragon 805) is listed on Qualcolm's website as compatible with QC 2.0. however, if you look at Samsung's website, it only lists Adaptive Fast Charging. Samsung just rebranded QC 2.0 as their own Adaptive Fast Charging. you can use all devices interchangeably.
also, the OP wanted a dual port QC 2.0 charger. that one only has 1 port w/ QC 2.0
I have already Anker 2 amp car charger in hand and i was thinking it wont be fast enough , i have seen video where quaclom demonstrated that Quick charging is faster than 2 amps charging , and judging by the fact that Samsung is providing comparable charging time with stock charger i was thinking that it is more than 5V 2.0 Amps .. too bad i am waiting for my phone to arrive.
http://www.amazon.ca/gp/product/B00SJU6EIK?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
I just purchased this.
I purchased this one from amazon when I had my Note 4 and I can confirm it works great with the S6. http://www.amazon.com/gp/product/B00P9UILUM/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
1lazysheep said:
any cable will work, but not every 2.0A charger will work. i tested it with a 2.0A (not the Samsung one) charger and "fast charging" did not show up in the phone.
AFAIK, you have to use one of Samsung's OEM chargers or one capable of the Quick Charge 2.0 standard for adaptive fast charging.
OP, i only did a cursory search, but i found this dual Quick Charge 2.0 charger that might meet your needs: http://www.amazon.com/dp/B00TGD79X8?psc=1
Click to expand...
Click to collapse
Yep. Your right sir. Just tried all my 2.0 / 2.1 amp chargers... not quick charging... guess ill grab some qc 2.0 amp chargers from amazon for car and backups.
alnova1 said:
I purchased this one from amazon when I had my Note 4 and I can confirm it works great with the S6. http://www.amazon.com/gp/product/B00P9UILUM/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
This is the one I was looking at, thanks!

Be careful with Huawei Power adapter:

Basically, when the charger is unplugged, the adapter runs in 5V mode, which is safe and good. But when the tablet is connected, then it is upgraded to 9V mode. any USB devices connected with a splitter on the charger wire will receive 9V also! This near doubling of voltage could cause devices to be fried, so make sure your Huawei power adapter isn't powering any hubs!!
YouTube demo video coming soon, overvolting a fan!

			
				
Good catch!
Thanks for sharing.
I thought charges and/or device ports had a regulator to control input voltage?
CorruptedSanity said:
Good catch!
Thanks for sharing.
I thought charges and/or device ports had a regulator to control input voltage?
Click to expand...
Click to collapse
Most electronics with a USB port will only be rated for say 5v, or maybe 6v to allow for naughty USB power supplies. 9v is nearly double 5v, and on sensitive low-tech chargers, like resistive ones that charge 18650 or whatever, you could expose the battery to a much higher voltage than what it should have, which could cause an explosion or whatever. I used a fan since it should be able to handle the extra voltage quite happily.
What do you mean fan?
Used a fan to cool what?
Michaelflat1 said:
Basically, when the charger is unplugged, the adapter runs in 5V mode, which is safe and good. But when the tablet is connected, then it is upgraded to 9V mode. any USB devices connected with a splitter on the charger wire will receive 9V also! This near doubling of voltage could cause devices to be fried, so make sure your Huawei power adapter isn't powering any hubs!!
YouTube demo video coming soon, overvolting a fan!
Click to expand...
Click to collapse
There is not problem at all. Qualcomm charge technology and USB 3.1 do the same. The charger and the device negotiate what voltage they want to send the same power but less current (more efficient). You are not supposed to o what you did, it your fault and not from Huawei.
pmj_pedro said:
There is not problem at all. Qualcomm charge technology and USB 3.1 do the same. The charger and the device negotiate what voltage they want to send the same power but less current (more efficient). You are not supposed to o what you did, it your fault and not from Huawei.
Click to expand...
Click to collapse
what I was getting at is that if you were to use a splitter, like I did, then be careful, as the voltage might raise. This is not a concern most of the time, but it's good to just be careful.
My OnePlus 5T and it's dash charging only works when these 3 conditions are satisfied:
Dash charger
Stock OnePlus lead
Nothing else plugged in
otherwise it will default down to normal. It's a shame that this didn't happen on the Huawei charger, but hopefully this means that it will be easier for implementation for powerbanks, I can't find any dash charge power banks. And also apparently Huawei phones usually play nice with other chargers. (USB-C power delivery I'm not sure on this device).
Michaelflat1 said:
what I was getting at is that if you were to use a splitter, like I did, then be careful, as the voltage might raise. This is not a concern most of the time, but it's good to just be careful.
My OnePlus 5T and it's dash charging only works when these 3 conditions are satisfied:
Dash charger
Stock OnePlus lead
Nothing else plugged in
otherwise it will default down to normal. It's a shame that this didn't happen on the Huawei charger, but hopefully this means that it will be easier for implementation for powerbanks, I can't find any dash charge power banks. And also apparently Huawei phones usually play nice with other chargers. (USB-C power delivery I'm not sure on this device).
Click to expand...
Click to collapse
I am just annoyed that Huawei do not use QC or USB-PD standards and I must use their charge to charge fast. I do not mind the 9v as my QC devices charges fast on the Huawei charger but not the other way round, forcing me to either change all my chargers or carry an extra charger.
Not sure if you are talking about FCP for in or out of powerbank, I have a Tronsmart powerbank that supports both QC3 and FCP out. It also supports QC in, which means it MAY charge faster with the Huawei's stock charger. I had not tested it that way yet but I think it should as the Huawei charger charges my other QC devices at QC speed.
Tronsmart Presto Power bank:
https://www.tronsmart.com/products/tronsmart-presto-10000mah-quick-charge-3-0-power-bank
Note that their own specifications regarding the input is incorrect, this picture shows the actual specifications behind the device, which shows it can take [email protected] in.
https://the-gadgeteer.com/wp-content/uploads/2017/07/tronsmart-presto-3.jpg
Also refer to my thread from a while back discussing FCP and QC.
https://forum.xda-developers.com/mediapad-m5/help/m5-quick-charge-t3822277
alvinlwh said:
I am just annoyed that Huawei do not use QC or USB-PD standards and I must use their charge to charge fast. I do not mind the 9v as my QC devices charges fast on the Huawei charger but not the other way round, forcing me to either change all my chargers or carry an extra charger.
Not sure if you are talking about FCP for in or out of powerbank, I have a Tronsmart powerbank that supports both QC3 and FCP out. It also supports QC in, which means it MAY charge faster with the Huawei's stock charger. I had not tested it that way yet but I think it should as the Huawei charger charges my other QC devices at QC speed.
Tronsmart Presto Power bank:
https://www.tronsmart.com/products/tronsmart-presto-10000mah-quick-charge-3-0-power-bank
Note that their own specifications regarding the input is incorrect, this picture shows the actual specifications behind the device, which shows it can take [email protected] in.
https://the-gadgeteer.com/wp-content/uploads/2017/07/tronsmart-presto-3.jpg
Also refer to my thread from a while back discussing FCP and QC.
https://forum.xda-developers.com/mediapad-m5/help/m5-quick-charge-t3822277
Click to expand...
Click to collapse
I know your trouble, I have a OP5t, and that charges at 7.5W from my Huawei charger, when it can charge at 20W using dash charger, my mediapad charges at 10W from the dash charger, out of 18w capability. I do look silly carrying round two chargers with the same plug on them!!
Yeah no dash charger power bank, at least there is a Huawei FCP one like you said, I might get that as my next one, but I've got a lovely EC technologies powerbank, and that only does 10W no matter what, shame really as it is 82whr (massive!).
Michaelflat1 said:
I know your trouble, I have a OP5t, and that charges at 7.5W from my Huawei charger, when it can charge at 20W using dash charger, my mediapad charges at 10W from the dash charger, out of 18w capability. I do look silly carrying round two chargers with the same plug on them!!
Yeah no dash charger power bank, at least there is a Huawei FCP one like you said, I might get that as my next one, but I've got a lovely EC technologies powerbank, and that only does 10W no matter what, shame really as it is 82whr (massive!).
Click to expand...
Click to collapse
Luckily (for me at least!), I do not normally carry my M5 around and therefore do not need quick charge on it. Even if taken on holiday, it can charge overnight in the hotel. However this put me off Huawei (and OnePlue, Oppo and any other brands that do not use QC standards) for my future purchase.
Wow, I didn't realize how bad this bites. MediaPad was my first QC3 device. Used it's charger in my bedroom. Then got a LG v35 QC3 phone last week to replace old Nexus 6P (USB C-PD). So excited to see the Huawei charger fast-charging both devices. So irritating to now realize that the LG QC3 charger won't fast charge the M5!
And Huawei is using a proprietary QC3 charging mechanism? ie. are there any compatible chargers on Amazon or only the charger from Huawei will fast charge the M5?
StephenMSmith said:
Wow, I didn't realize how bad this bites. MediaPad was my first QC3 device. Used it's charger in my bedroom. Then got a LG v35 QC3 phone last week to replace old Nexus 6P (USB C-PD). So excited to see the Huawei charger fast-charging both devices. So irritating to now realize that the LG QC3 charger won't fast charge the M5!
And Huawei is using a proprietary QC3 charging mechanism? ie. are there any compatible chargers on Amazon or only the charger from Huawei will fast charge the M5?
Click to expand...
Click to collapse
Sorry, Huawei does not use QC standards but their own FCP/SCP instead. QC chargers will not fast charge Huawei gear but Huawei charger MAY charge QC gear fast.
So if I plug my M5 into a standard QC3.0 charger (9v I think), does it at least charge somewhat faster than a standard, non-QC charger? I would assume so. And are they're any 3rd party fasxt chargers compatible w/Huawei's dumbarse proprietary QC3 charging?
StephenMSmith said:
So if I plug my M5 into a standard QC3.0 charger (9v I think), does it at least charge somewhat faster than a standard, non-QC charger? I would assume so. And are they're any 3rd party fasxt chargers compatible w/Huawei's dumbarse proprietary QC3 charging?
Click to expand...
Click to collapse
No it doesn't, as confirmed by a V/A USB meter. It will only top out at 5V/2A.
I repeat again, Huawei does NOT use QC3 technology, but FCP/SCP technology. If you are looking for a charger that can do both QC and FCP from the same socket, read through the tread again as I had already posted a brand and model that had been tested and confirmed to do both.
Ah, sorry, me dumb and had in my head that M5 was QC3. Now I get it -- FCP, not same as QC3. OK, I see your link and several other chargers compatible w/QC3 and FCP. Thanks!
Hi,
I have a ThinkPad E580 which comes along with a charger Type-C, on the charger has been written : OUTPUT: 20V-3.25A / 15V-3A / 9V-2A / 5V-2A
Is it safe to try charge my MediaPad M5 by this charger?
sz.hatef said:
Hi,
I have a ThinkPad E580 which comes along with a charger Type-C, on the charger has been written : OUTPUT: 20V-3.25A / 15V-3A / 9V-2A / 5V-2A
Is it safe to try charge my MediaPad M5 by this charger?
Click to expand...
Click to collapse
I had used USB PD adaptors on the M5 before and it charges fine, but not quickly.
My Pad (M5 10.8 WiFi) charges via USB PD with 18 Watts using the 9 Volt Profile. What doesn't work is Quick Charge. Power delivery works fine
Is there anything special about the actual Huawei furnished cable? I need a longer one than what was furnished.
reubenray said:
Is there anything special about the actual Huawei furnished cable? I need a longer one than what was furnished.
Click to expand...
Click to collapse
Nothing whatsoever
But get a good one that supports high wattage.
Some cables only transmit 5 watts
Meaning 5v and 1 amp
Technology from 2005

Question Which is the best charger for Pixel 7 Pro in india? I am using old pixel 2 charger but it's very slow.

Hey guys,
I want to know which one is the best charger for Pixel 7 Pro ! I am currently using Old Pixel 2's charger. But its not charge my phone in good speed. Hence is there any good Indian standard charger available in online portal...
I am using Nothing Phone Charger 45w pd + pps supported. 0-100 in 1.40 hrs...
Just use any good PD Charger. Am using Baseus GaN 65W PD charger. One charger for all my devices.
i am using this 33w charger, gives fast charge and its pretty small, has option of c to c as well as type c to usb. Works on my smart watch and TWS buds so dont need to carry 2 chargers while travelling.
https://www.amazon.in/gp/product/B0B4K3WM31/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

Categories

Resources