I was thinking of installing HavocOS on my redmi s2/y2.There are so many builds on the HavocOS website but I don't know if any of them are for the s2/y2.I would like to know if there is any build of HavocOS and if there is one then which one.
Thanks in advance
parthibratan said:
I was thinking of installing HavocOS on my redmi s2/y2.There are so many builds on the HavocOS website but I don't know if any of them are for the s2/y2.I would like to know if there is any build of HavocOS and if there is one then which one.
Thanks in advance
Click to expand...
Click to collapse
this one base on arm64 PIE
https://sourceforge.net/projects/ha...90914-phhgsi_arm64_a-Official.img.xz/download
and this one base on arm32 PIE
https://sourceforge.net/projects/ha...0190914-phhgsi_arm_a-Official.img.xz/download
note: GSI rom not custom rom
I have tried havoc android 10 gsi but it didn't work
mohitdabas07 said:
I have tried havoc android 10 gsi but it didn't work
Click to expand...
Click to collapse
booted properly on YSL arm64 Android 10
Baim alif said:
booted properly on YSL arm64 Android 10
Click to expand...
Click to collapse
Is this havoc rom?
Can you give rom link and steps because mine didn't bootup and please provide review of this if you can i am dying to drying out android 10 rom
mohitdabas07 said:
Is this havoc rom?
Can you give rom link and steps because mine didn't bootup and please provide review of this if you can i am dying to drying out android 10 rom
Click to expand...
Click to collapse
yups.. havoc
but I think this is an initial release so it can't be used as a daily driver yet
Baim alif said:
yups.. havoc
Click to expand...
Click to collapse
Based on android 10?
Please give steps too and rom link
mohitdabas07 said:
Based on android 10?
Please give steps too and rom link
Click to expand...
Click to collapse
1.install custom rom base on arm64 that fully treble support. (i used lineage 15.1 oreo)
2.do factory reset
3.install image... gsi rom
4.do factory reset
5.reboot...
this one
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Baim alif said:
1.install custom rom base on arm64 that fully treble support. (i used lineage 15.1 oreo)
2.do factory reset
3.install image... gsi rom
4.do factory reset
5.reboot...
this one
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Click to expand...
Click to collapse
I tried dot os as base which is treble supported and used havoc os android 10 gsi(arm 64 a only) by express luke but after doing all steps when I try to boot up the screen lights up and then lights off this is happening continously nothing else
mohitdabas07 said:
I tried dot os as base which is treble supported and used havoc os android 10 gsi(arm 64 a only) by express luke but after doing all steps when I try to boot up the screen lights up and then lights off this is happening continously nothing else
Click to expand...
Click to collapse
I've tried all the custom ROMs that are currently available but only Lineage OS 15.1 oreo fully treble support..
so dot os give me same result.. bootloop
note: Sorry ... from whom you know that dot os fully treble support?
Baim alif said:
I've tried all the custom ROMs that are currently available but only Lineage OS 15.1 oreo fully treble support..
so dot os give me same result.. bootloop
Click to expand...
Click to collapse
Thnx bro you help is much appreciated please give me lineage os 15.1 link too
mohitdabas07 said:
Thnx bro you help is much appreciated please give me lineage os 15.1 link too
Click to expand...
Click to collapse
you are welcome...
https://forum.xda-developers.com/redmi-s2/development/rom-lineageos-15-1-ysl-t3892569
Baim alif said:
you are welcome...
https://forum.xda-developers.com/redmi-s2/development/rom-lineageos-15-1-ysl-t3892569
Click to expand...
Click to collapse
Sorry to bother you again but same bootloop problem after using lineage os 15.1 as base too
mohitdabas07 said:
Sorry to bother you again but same bootloop problem after using lineage os 15.1 as base too
Click to expand...
Click to collapse
very sorry to hear that, maybe I missed something. Try this, I hope it works for you..
i share my Redmi S2 vendor
https://mega.nz/#!aqBWRQTZ!xulAkn1pB8WLfdQ9Sl3qbL_ZHvZqREY4GXSlt_93MS8
1. extract and place the folder in your twrp backup directory
2. reboot to recovery
3.do factory reset
4.restore vendor partition
5.do factory reset
6.flash image Havoc 3.0
7.do factory reset
8.reboot to system
9.done..
have a nice day....
hi @baim ! us this the twrp you used to flash the android 10 gsi: BR-ysl-S-1.5.0-20190825-UNOFFICIAL.zip ?
aeoi said:
hi @baim ! us this the twrp you used to flash the android 10 gsi: BR-ysl-S-1.5.0-20190825-UNOFFICIAL.zip ?
Click to expand...
Click to collapse
yes...
---------- Post added at 06:18 AM ---------- Previous post was at 06:08 AM ----------
flash gsi rom ... Havoc 3.0 Android 10 arm64
1.backup your custom rom ( i use aex as daily driver)
2.do factory reset
3.install lineage 15.1 oreo arm64
4.booted to system
5.reboot to recovery
6.do factory reset
7.backup your lineage 15.1
7.wipe all except internal storage and external storage
8.restore boot partition from your daily driver
9.restore vendor partition from lineage 15.1
10.flash image. Havoc 3.0
11.do factory reset
12.flash magisk-phh.zip
13.reboot to system
14.done..
Baim alif said:
yes...
---------- Post added at 06:18 AM ---------- Previous post was at 06:08 AM ----------
flash gsi rom ... Havoc 3.0 Android 10 arm64
1.backup your custom rom ( i use aex as daily driver)
2.do factory reset
3.install lineage 15.1 oreo arm64
4.booted to system
5.reboot to recovery
6.do factory reset
7.backup your lineage 15.1
7.wipe all except internal storage and external storage
8.restore boot partition from your daily driver
9.restore vendor partition from lineage 15.1
10.flash image. Havoc 3.0
11.do factory reset
12.flash magisk-phh.zip
13.reboot to system
14.done..
Click to expand...
Click to collapse
How much time first boot need?
LacitheBeast said:
How much time first boot need?
Click to expand...
Click to collapse
about 2-3 minutes..
Baim alif said:
about 2-3 minutes..
Click to expand...
Click to collapse
Stuck on android logo for more than 20 minutes
What should i do?
LacitheBeast said:
Stuck on android logo for more than 20 minutes
What should i do?
Click to expand...
Click to collapse
Have you installed Magisk-phh?
( not an ordinary magisk, but magisk-phh)
what is your custom rom as a daily driver?
Related
You need to be in stock emui 8 with unlocked bootloader.
If you are in elemental rom come back to stock emui 8 then flash this rom.
If you are in another gsi you can proceed directly (flash below recovery then do factory reset then flash gsi los rom via fastboot then again reboot to stock recovery do factory reset)
If you are in stock emui 8 do not wipe anything just flash it via fastboot and do factory reset.
first flash this recovery
https://mega.nz/#!cbJFAIQD!qvp1KnZ0qxlg6nHDFmpM5qyZ9QUVIDe5PoZE0BQf8fs
Fastboot command: fastboot flash recovery_ramdisk name of recovery.img
Then download
https://openkirin.net/download/
Fastboot command: fastboot flash system name of image.img
Los or RR rom and flash via fastboot (no need to wipe anything) then reboot to recovery do factory reset. You will have oreo 8.1 with gapps ,full signal bars,face unlock and stock camera.
If you are experiencing no sound its not gsi problem you didn't flashed stock completely so first flash this twrp recovery (only if you are in oreo not for emui5)
https://mega.nz/#!a81EDZAR!2-9yPFh3reghkGcfSl3nRIJhHGkP8fqDsgUG66ewjkk
Then flash stock emui 8 via huru
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
If huru only flased update.zip and gave you error no update_full_hw.zip and no update_data_full_public.zip not found in sd card then you need to rename them and flash again without wiping anything.
If stock emui 8 taking more than 5 minutes to boot then flash stock recovery mentioned above and do factory reset then it will boot with in 5 minutes.
If you don't have network or imei then you need to root. Then use any root explorer then go to cust/cn/all/localprop and change the line ro_config full network support=ture to false then reboot your network and imei will come back. You can do this in stock or in gsi.
RR ROM has great battery life with tons of customizations.
For emui8 flashing instructions,root and sound mod follow these instructions
https://forum.xda-developers.com/ho...si-honor-6x-8-1-0-t3809004/page5#post76981105
For telegram support of openkirin join this group
https://t.me/joinchat/HUf8EBJUJZQD281E59MdDw
Hell yess, thanks to open kirin team and you for mentioning it, the rom is excellent in use all bugs (the ones i faced in other gsi) fixed in this one and the availability of stock camera is just a cherry on top ?
Im newbie not familiar with this term
what is "gsi"?
need help
How to install emui 8 on bln-l21c432
jlan007 said:
Im newbie not familiar with this term
what is "gsi"?
need help
Click to expand...
Click to collapse
Generic system image. Read about project treble.
jlan007 said:
Im newbie not familiar with this term
what is "gsi"?
need help
Click to expand...
Click to collapse
Gsi means generic system image. In oreo custom roms will be available in system image formate we don't need twrp to flash custom roms just flash it via fastboot and factory reset.
Gsi roms will give you latest android os updates same as pixel devices getting so we don't need to wait for hauwei to release updates. If android p releases these gsi roms will give u update same as google devices getting. Oreo is game changer for every device.
If u want to flash gsi rom follow the emui8 upgrade method
https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
Then follow instructions on openkirin support section.
--ahmed said:
How to install emui 8 on bln-l21c432
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
Follow that guide you will be on oreo in 10mins or less
If we rebrand to Chinese then update to Oreo and flash gsi..can we rebrand to our original variant or is there need to?
Which gsi redirection rom , carbon rom or los 15 ???
johnscrub said:
If we rebrand to Chinese then update to Oreo and flash gsi..can we rebrand to our original variant or is there need to?
Click to expand...
Click to collapse
Yes we can rebrand to original variant using hwota8
Khan ubaid said:
Which gsi redirection rom , carbon rom or los 15 ???
Click to expand...
Click to collapse
Go for Los 15 which is more stable and updated one.
Resurrection remix has huawei stock camera inbuilt....
Why flash stock recovery ? For those who are on Twrp ?
Great post. Hope you share some more experiences.
Trying to use the Google Play store it's telling me that my device isn't certified and I can't do anything..
NVM: For anyone else wondering I installed Magisk then the Magiskhide module and changed fingerprint.
Khan ubaid said:
Resurrection remix has huawei stock camera inbuilt....
Click to expand...
Click to collapse
Los is also had hauwei stock camera but rr in initial buid and los got 4 updates.
Nollie8969 said:
Why flash stock recovery ? For those who are on Twrp ?
Great post. Hope you share some more experiences.
Click to expand...
Click to collapse
Because you can't perform factory reset from twrp it can't do it correctly finally you will ended up in bootloop. You can flashctwrp right after doing factory reset but openkirin doesn't support twrp.
whateven12 said:
Trying to use the Google Play store it's telling me that my device isn't certified and I can't do anything..
NVM: For anyone else wondering I installed Magisk then the Magiskhide module and changed fingerprint.
Click to expand...
Click to collapse
So before flashing magdisk did playstore worked for you? Or did you flashed magdisk when flashing os? For me playstore works perfectly.
Ramesh006 said:
So before flashing magdisk did playstore worked for you? Or did you flashed magdisk when flashing os? For me playstore works perfectly.
Click to expand...
Click to collapse
Play store or any Google app wouldn't work for me before I install Magisk and the Module to change the fingerprint to a certified device.
No solution, but in the meantime you can use Aptoide as store: http://en.aptoide.com
whateven12 said:
Play store or any Google app wouldn't work for me before I install Magisk and the Module to change the fingerprint to a certified device.
Click to expand...
Click to collapse
Did you flashed los or rr? Try reflash.
guys,i am currently using lineage os 15.1 official..if i have to flash another custom rom , which twrp i have to use..whether the offical twrp or lineage based twrp
dharun005 said:
guys,i am currently using lineage os 15.1 official..if i have to flash another custom rom , which twrp i have to use..whether the offical twrp or lineage based twrp
Click to expand...
Click to collapse
Lineage based is fine, I was on 15.1 official , then switched to Aex with same twrp with no problem whatsoever.
thnks fr ur reply.i installed lineage without changing it to ext4.so my doubt is if i have to change it frm f2f to ext4,can i use lineage based twrp to format data or i have to switch back to original twrp to do the process.
dharun005 said:
thnks fr ur reply.i installed lineage without changing it to ext4.so my doubt is if i have to change it frm f2f to ext4,can i use lineage based twrp to format data or i have to switch back to original twrp to do the process.
Click to expand...
Click to collapse
Lineage based causes issue with formatting data many a times. But in my case if u first change data to ext4 ,then wipe data then all is fine.
But users have also reported bootloops and decryption issues with formatting data with LOS twrp. So for safety, formatting data with official twrp is best but in my case former worked for me.
Hi
I'm currently on crdroid . can i flash los or aex with dirty flash?
mysteres said:
Hi
I'm currently on crdroid . can i flash los or aex with dirty flash?
Click to expand...
Click to collapse
Man, dont dirty flash one rom over other. The pain of clean flash is way less than dirty flash with problems.
dharun005 said:
guys,i am currently using lineage os 15.1 official..if i have to flash another custom rom , which twrp i have to use..whether the offical twrp or lineage based twrp
Click to expand...
Click to collapse
I couldn't get the Lineage OS TWRP to work as it couldn't mount the data partition even though it re-formated it to ext4.
Official TWRP worked first time.
Hope this helps.
Good luck!
Which is the best GSI TREBLE ROM for LENOVO S5?
Chewbaccaun said:
Which is the best GSI TREBLE ROM for LENOVO S5?
Click to expand...
Click to collapse
I am using this one:
https://github.com/phhusson/treble_experimentations/releases/
Haven't used any other yet. MTP doesn't work, and Camera apps only take photos when flash is ON. Everything else seems fine so far.
Tutorial flash dan upgrade Lenovo S5 di sini https://youtu.be/wbpV59kutJM
Havoc-OS-v2.9_20190914_pphgsi_arm64_a-Official
I am using Havoc OS 2.9 GSI from sourceforge. sorry I am not allowed to give links cause i'm a new member.
bernieparcon001 said:
I am using Havoc OS 2.9 GSI from sourceforge.
Click to expand...
Click to collapse
Hello guys. Any update about Lenovo S5?
I am still using Havoc OS 2.9.
This is the only ROM that I was able to boot so far.
OOS GSI did not boot, and AOSP GSI has many bugs.
So far Havoc is almost bugless, together with the pico version of GApps.
Everything is working, from the camera to the lockscreen fingerprint, to the 4G connection and all.
Hi. I accidentally wipe the persist partition while install gsi. Can some share backup persist.img with me. I can't use any sensor at all
bernieparcon001 said:
Hello guys. Any update about Lenovo S5?
I am still using Havoc OS 2.9.
This is the only ROM that I was able to boot so far.
OOS GSI did not boot, and AOSP GSI has many bugs.
So far Havoc is almost bugless, together with the pico version of GApps.
Everything is working, from the camera to the lockscreen fingerprint, to the 4G connection and all.
Click to expand...
Click to collapse
Which version of havoc os to install? Arm 64 Ab or aonly? What's the difference?
alvinprimo said:
Which version of havoc os to install? Arm 64 Ab or aonly? What's the difference?
Click to expand...
Click to collapse
You should install the arm64 A-only version because our phone only supports A partition
A64 or Arm64 is about the bitness of the processor. Our chipset is arm 64 bit.
A/B means that the phone has two partitions to support updating the OS or flashing other os without deleteng previous os so that when new os fails, you can revert back without flashing again.
bernieparcon001 said:
You should install the arm64 A-only version because our phone only supports A partition
A64 or Arm64 is about the bitness of the processor. Our chipset is arm 64 bit.
A/B means that the phone has two partitions to support updating the OS or flashing other os without deleteng previous os so that when new os fails, you can revert back without flashing again.
Click to expand...
Click to collapse
Thanx for the reply, so it means our phone can be brick in wrong flashing because it doesn't have two partitions. The arm 64 Aonly then i have to choose to flash to our device.
alvinprimo said:
Thanx for the reply, so it means our phone can be brick in wrong flashing because it doesn't have two partitions. The arm 64 Aonly then i have to choose to flash to our device.
Click to expand...
Click to collapse
Yes. It works for me, but you have to take it at your own risk.
Anyway. This rom is bugless, but the latest google camera doesn't work.
Make sure to have twrp installed for flashing roms without gapps included
you gsi's that already have gapps you can flash via either twrp or fastboot
Opengapps use arm and 9.0
https://opengapps.org/
opengapps10
https://sourceforge.net/projects/opengapps/files/arm/beta/20191114/
BitGapps 10
http://www.mediafire.com/file/vbskbno8oi7d1l0/BiTGApps-arm-10.0.0-v0.5-SW_signed.zip/file
Android 9:
Dot OS
https://sourceforge.net/projects/do...4_ab-UNOFFICIAL-20190918-0616.img.xz/download
Descendant
https://androidfilehost.com/?fid=6006931924117932459
Phh AOSP [ROOT] [GAPPS]
https://github.com/phhusson/treble_...v119/system-arm32_binder64-ab-gapps-su.img.xz
AOSP [fdroid][microG]
https://androidfilehost.com/?fid=1899786940962592691
Resurection Remix 7.0.3
https://sourceforge.net/projects/de...s/RR-P-v7.0.3-20191112-A64-AB.img.xz/download
Lineage OS 16
https://sourceforge.net/projects/an...017-UNOFFICIAL-treble_a64_bvN.img.xz/download
Android 10:
AOSP 10 [GAPPS]
https://github.com/phhusson/treble_...8/system-quack-arm32_binder64-ab-gapps.img.xz
Pixel Experience Q beta [GAPPS]
https://sourceforge.net/projects/de...elExperienceQ-28102019-A64-AB.img.xz/download
Dirty Unicorns 14 [Dialer Broken]
https://sourceforge.net/projects/de...tyUnicorns-14.0_111119-A64-AB.img.xz/download
Havoc OS 3.0
https://sourceforge.net/projects/ex...3.0-20191226-A64AB-Unofficial.img.xz/download
Lineage OS 17
https://sourceforge.net/projects/an...117-UNOFFICIAL-treble_a64_bvN.img.xz/download
EvolutionX 3.3
https://sourceforge.net/projects/ex...10.0-20191117-1424-UNOFFICIAL.img.xz/download
Device ID is a app for finding out your GSF
The code for gapps For custom ROMs
Will make it so you can access google play store
Put your gsf in this website
https://www.google.com/android/uncertified/
dont need twrp only fastboot to flash
EngineFixer44 said:
dont need twrp only fastboot to flash
Click to expand...
Click to collapse
twrp is to flash gapps on roms that dont come with them
any rom work fingerprint?
Linuxassassin said:
Make sure to have twrp installed for flashing roms without gapps included
you gsi's that already have gapps you can flash via either twrp or fastboot
Dot OS Needs Gapps
https://sourceforge.net/projects/do...4_ab-UNOFFICIAL-20190918-0616.img.xz/download
Descendant needs Gapps
https://androidfilehost.com/?fid=6006931924117932459
Phh AOSP
But has root access and gapps
https://github.com/phhusson/treble_...v119/system-arm32_binder64-ab-gapps-su.img.xz
Pixel Experience has gapps
https://github.com/EnesSastim/Downl...2019-08-24/PixelExperience_Plus-9.0-a64_ab.7z
Evolution X
https://sourceforge.net/projects/ev...volution-9.0-GSI-A64-AB-20190812.zip/download
AOSP microg fdroid instead of google play
https://androidfilehost.com/?fid=1899786940962592691
MSM Xtended Needs Gapps
https://androidfilehost.com/?fid=1899786940962570880
Opengapps use arm and 9.0
https://opengapps.org/
Click to expand...
Click to collapse
I got the first three to boot. The rest just sit indefinitely at the boot animation. Wiped system partition between each flash.
kpc said:
I got the first three to boot. The rest just sit indefinitely at the boot animation. Wiped system partition between each flash.
Click to expand...
Click to collapse
i didnt test the botom four i was going to test them
filipedonato said:
any rom work fingerprint?
Click to expand...
Click to collapse
i think dot os
can you tell me if these are 64 or 32 bit roms?, thnx!
brickhayabusa said:
can you tell me if these are 64 or 32 bit roms?, thnx!
Click to expand...
Click to collapse
arm32 binder 64
There will be a way to flash Pixel Experience without TWRP, if so, what are the commands
Wiliz Yei Yei said:
There will be a way to flash Pixel Experience without TWRP, if so, what are the commands
Click to expand...
Click to collapse
You can use fastboot to flash the zip
Fastboot -w
Fastboot flash system /path/to/your.img
If I install OASP Pie with Root, and then AOSP Q will Root continue? Or was deleted
Wiliz Yei Yei said:
If I install OASP Pie with Root, and then AOSP Q will Root continue? Or was deleted
Click to expand...
Click to collapse
i think it would delete root im not sure cause i did not test it
nav buttons
Hello all! Very new to all of this, actually first time ive ever flashed a phone b4. I have the 1952-4. I recently flashed 2 other gsi from a diff forum, Sourceforge, I believe. But on either one I didn't have any nav buttons am currently DL the AOSP from this OP with ROOT&GAPPS so im just wonbdering if there is something I should address prior to flashing this gsi to correct no nav or what. Sorry im super green and like I said this is first time so any help would be awesome! thanks.
Strokdchevy said:
Hello all! Very new to all of this, actually first time ive ever flashed a phone b4. I have the 1952-4. I recently flashed 2 other gsi from a diff forum, Sourceforge, I believe. But on either one I didn't have any nav buttons am currently DL the AOSP from this OP with ROOT&GAPPS so im just wonbdering if there is something I should address prior to flashing this gsi to correct no nav or what. Sorry im super green and like I said this is first time so any help would be awesome! thanks.
Click to expand...
Click to collapse
Flash the new gsi I put on the forum dirty unicorns 14 works almost flawless and you can install it via a clean flash
Linuxassassin said:
Make sure to have twrp installed for flashing roms without gapps included
you gsi's that already have gapps you can flash via either twrp or fastboot
Opengapps use arm and 9.0
https://opengapps.org/
BitGapps 10
http://www.mediafire.com/file/vbskbno8oi7d1l0/BiTGApps-arm-10.0.0-v0.5-SW_signed.zip/file
Android 9:
Dot OS
https://sourceforge.net/projects/do...4_ab-UNOFFICIAL-20190918-0616.img.xz/download
Descendant
https://androidfilehost.com/?fid=6006931924117932459
Phh AOSP [ROOT] [GAPPS]
https://github.com/phhusson/treble_...v119/system-arm32_binder64-ab-gapps-su.img.xz
AOSP [fdroid][microG]
https://androidfilehost.com/?fid=1899786940962592691
Resurection Remix 7.0.3
https://sourceforge.net/projects/de...s/RR-P-v7.0.3-20191112-A64-AB.img.xz/download
Android 10:
Pixel Experience Q beta [GAPPS]
https://sourceforge.net/projects/de...elExperienceQ-28102019-A64-AB.img.xz/download
Dirty Unicorns 14 [Dialer Broken]
https://sourceforge.net/projects/de...tyUnicorns-14.0_111119-A64-AB.img.xz/download
Havoc OS 3.0
https://sourceforge.net/projects/ex....0-20191117-A64-AB-Unofficial.img.xz/download
Click to expand...
Click to collapse
I tested all GSI, and none of them works the fingerprint sensor
Guhl0rd64 said:
I tested all GSI, and none of them works the fingerprint sensor
Click to expand...
Click to collapse
Yep I think it's because of the sensor they use
My only problem with the roms I tried
No Bluetooth audio for music
And root does not work
And fingerprint don't work other then that it's stable
Linuxassassin said:
Yep I think it's because of the sensor they use
My only problem with the roms I tried
No Bluetooth audio for music
And root does not work
And fingerprint don't work other then that it's stable
Click to expand...
Click to collapse
My Moto G7 Play is the XT1952-2 (Brazilian version), I installed everything right, but not now it is no longer vibrating, it no longer vibrated when I put the GSI DotOS, but when I returned to ROM of factory, still not vibrating, and I was wondering if anyone had this same problem as mine, would appreciate some help if possible!
Very nice. I just got a hold of a line on a bunch of G7 Play's for $20 a piece. Going to give some of these roms and recoveries a run for their money.
Is there already a gsi for One Macro? I can't even install the phhusson gsi, The gsi goes into bootloop ..
Moto One Macro GSI
HenryBrian14 said:
Is there already a gsi for One Macro? I can't even install the phhusson gsi, The gsi goes into bootloop ..
Click to expand...
Click to collapse
It works fine for me. Try flashing the latest one and flash it in both system slots, a and b. And Lineage OS 17.1 by Andy Yan also works fine now. Only problem is gapps. The system partition shrinks when you install it so you can't flash Gapps.