Hi guys ,i followed a tuto on the net to update to the beta v500n18a on Korean variant and this is too laggy anyone tried it and experienced a better case
okbakaka said:
Hi guys ,i followed a tuto on the net to update to the beta v500n18a on Korean variant and this is too laggy anyone tried it and experienced a better case
Click to expand...
Click to collapse
Nope.
Related
Hi guys.I had an Xperia Z since yesterday,when i bought an AT&T LG G3.I'm from Romania and the man from whom I bought it got it from the USA.When I want to make the software update,it tells me that the latest version is installed.But the version i have is 4.4.2,and the latest is Lollipop...
So,is there a way to do the software update?I wouldn't like to install CM 12.1 because,from what i've read,it's full of bugs...
Thanks!
c8ilu222 said:
Hi guys.I had an Xperia Z since yesterday,when i bought an AT&T LG G3.I'm from Romania and the man from whom I bought it got it from the USA.When I want to make the software update,it tells me that the latest version is installed.But the version i have is 4.4.2,and the latest is Lollipop...
So,is there a way to do the software update?I wouldn't like to install CM 12.1 because,from what i've read,it's full of bugs...
Thanks!
Click to expand...
Click to collapse
This has been asked a good amount of times in just a few days. No you cannot. You'd have to root , flash twrp, and then flash a rom that you'd want to use.
Sent from my iPhone using Tapatalk
I searched the internet but i didn't found the answer.
Why?Only because i don't use an AT&T SIM?
c8ilu222 said:
I searched the internet but i didn't found the answer.
Why?Only because i don't use an AT&T SIM?
Click to expand...
Click to collapse
Since you don't have att service in your country you have no option but root, flash tarp and flash the rom of your preference.
I have rooted the phone and i've installed twrp,but i didn't find a good,stable ROM.Can you reccomend me one good ROM?
Suggestions
c8ilu222 said:
I have rooted the phone and i've installed twrp,but i didn't find a good,stable ROM.Can you reccomend me one good ROM?
Click to expand...
Click to collapse
If you read the "Index" thread, you could find this, which is what I think you want: Stock Lollipop 5.0.1
Of course, official (nightly) for cm12.1 just came out. Find that yourself.
dkephart said:
If you read the "Index" thread, you could find this, which is what I think you want: Stock Lollipop 5.0.1
Of course, official (nightly) for cm12.1 just came out. Find that yourself.
Click to expand...
Click to collapse
Yuup,this is exactly what i've been looking for Thank you very much!
Hello there,
I´ve tried lots of ways for rooting my pro 2, all those that work with fopr example V20d, but apparently non of those work for this V20a firmware. Any ideas? Anyone with V20a SEA version that has rooted his?
Need help.
Thanks.
bucanero00 said:
Hello there,
I´ve tried lots of ways for rooting my pro 2, all those that work with fopr example V20d, but apparently non of those work for this V20a firmware. Any ideas? Anyone with V20a SEA version that has rooted his?
Need help.
Thanks.
Click to expand...
Click to collapse
this works
http://highonandroid.com/android-smartphones/how-to-root-lg-g-flex-2-g2-g3-on-lollipop/
letschky said:
this works
http://highonandroid.com/android-smartphones/how-to-root-lg-g-flex-2-g2-g3-on-lollipop/
Click to expand...
Click to collapse
Is this really working with v20a SEA? I have also tried many rooting methods but so far none of them worked...
ubabic said:
Is this really working with v20a SEA? I have also tried many rooting methods but so far none of them worked...
Click to expand...
Click to collapse
I think this works for you.For me is this the only Methode to root my GP2
Hello there and sorry if I'm posting in the wrong section !
As detailed in the title, I own a Samsung GT N8010 tablet running right now Android 4.4.2 and I would like to update it to be able to run applications needing a 5.1 version of Android.... :crying:
Please what do you suggest as ROM for this upgrade ?
Last but not least, may I upgrade it to a more recent version (Marshmallow, Nougat or other) and, if yes, which soltion do you recommend ?
Many thanks in advance for your gentle help and all the best,
Germain
Their is no Samsung update after 4.4.2 , see multiple identical posts .
Lineage roms are the ones to look at nothing else in development .
JJEgan said:
Their is no Samsung update after 4.4.2 , see multiple identical posts .
Lineage roms are the ones to look at nothing else in development .
Click to expand...
Click to collapse
Thank you for your response. Yes I know, Samsung left us officially at the 4.4.2 version and I was able to update it years ago till that version !
So apparently the Lineage ROM's are thus the only way to go with my old tablet...
Please may I ask a very last question: which version do you recommend as a stable one ?
Sorry none.you ca read the threads .
I use stock 4.4.2 these days.
JJEgan said:
Sorry none.you ca read the threads .
I use stock 4.4.2 these days.
Click to expand...
Click to collapse
Do you mean none is really stable yet ?
Was wondering if anyone is getting anywhere with the A2020N2 or A2020N3 chinese variants of the Axon 10 Pro? I can't seem to find anything aside from the 4g models. I did read a post in my travels that 'Unjustified Dev' was going to release a bootloader unlock for the A2020N2 awhile back but can't find anything more on it.
The phone is great and I was able to uninstall most of the Chinese bloatware but would love to see root so I can push the limits of this phone.
Some info would be greatly appreciated whether it is good news or bad news.
Thanks.
Seem to be making some headway on this.
If you go to this website and translate Chinese to English it looks like someone was successful in unlocking the bootloader and installing Magisk to the a2020n2
https://pianshen.com/article/70191805055/
The claim the tool only works on Android 9 and unfortunately I have already flashed to Android 10 b16 and can't seem to find a way to roll back. I have tried flashing the older zips from the ZTE website to no avail.
If anyone has any other suggestions on rolling back the firmware to Android 9 I would appreciate it.
I found the tool they were talking about on androidfilehost
https://androidfilehost.com/?fid=1899786940962591021
You can only find the firmware for this phone if you to to the chinese site and translate it.
https://www.ztedevices.com/cn/supports/zte-a2020n2-pro/
Anyone on Android 9 that wants to give this a shot? I would recommend doing a full backup so if anything goes wrong you can go back into DFU mode and reflash the original files if you are considering doing this.
Hy! Where did you found the Android 10 update for the 5G variant? Can you send us a link with the update?
TheLegend88 said:
Hy! Where did you found the Android 10 update for the 5G variant? Can you send us a link with the update?
Click to expand...
Click to collapse
Did you actually read the post above... It literally tells you how to find the firmware.
Yes! But the only version that I see it's the v2.2. Is that Android 10? Cause the release note field is empty.
yes, v2.2.0 b16 is android 10. v2.0.0 is android 9.
Hi to all!
I have the A2020N3 version. Someone can explain me what's the difference with the A2020N2 versione?
I'm still on android 9 and I'm wondering if it worths to upgrade to Android 10...some suggestions?
Hey! I found this post but looks a little bit outdated... It's ir possible to update the A2020N3 to Android 10? Is the Axon 10 Pro 5G from Drei Austria.
I received Android 10 update for my A2020N3 (4.6 version), the phone flows like butter! Where I can find a changelog?
gioyann said:
I received Android 10 update for my A2020N3 (4.6 version), the phone flows like butter! Where I can find a changel
Click to expand...
Click to collapse
Bro it model is 5G model??
Did anyone get access to the beta file?
Nop , only for the ultra. We just have to wait more
Nope. Im getting pissed. The ultra and the regular s21 got it and there is no one thats working on the + model
I believe that this year we will only have access to beta 2 or we can even test
matheus_barbosa7 said:
I believe that this year we will only have access to beta 2 or we can even test
Click to expand...
Click to collapse
Beta is already out in UK and South Korea, and so far we only have people with the Ultra and the Base model fetch the package for us. Ultra's dominated the sales, that's why the Ultra forums are a lot richer compared to the one we're here.
It's simple, we need someone with an Unlocked S21+ in UK to do the Beta apply, it's there, it's waiting for someone to grab it. If they release it in Germany, i'll make sure i share it here.
http://fota-secure-dn.ospserver.net:80/firmware/BTU/SM-G996B/nspx/e15bb1742584480ea0a7dfd394287fd8.bin?px-time=635fe665&px-hash=6fe06d215ec15a6807c6e1bc6352386e&px-wid=5931940-WSA220901151445&px-wctime=2022-09-01%2015:14:45&px-unum=&px-nb=UGtezEZ854jbmFcvWGxLEA==
Removed non working link
This is the oneui 5.0 beta ??
Just download, try to install it !!!!! Thanx @Saggy2121
Edit : it works !!! Great Job !
Naikkon said:
This is the oneui 5.0 beta ??
Click to expand...
Click to collapse
Yes !
news42300 said:
Yes !
Click to expand...
Click to collapse
Can you please tell how to instal using adb !
Just a short tutorial
Naikkon said:
Can you please tell how to instal using adb !
Just a short tutorial
Click to expand...
Click to collapse
Just follow this step : Link
the second link is broke
i have downloaded with the first link and installed with alliance.
its working great !!
i have 21+ with android 13 !!!
Saggy2121 said:
http://fota-secure-dn.ospserver.net:80/firmware/BTU/SM-G996B/nspx/e15bb1742584480ea0a7dfd394287fd8.bin?px-time=635fe665&px-hash=6fe06d215ec15a6807c6e1bc6352386e&px-wid=5931940-WSA220901151445&px-wctime=2022-09-01%2015:14:45&px-unum=&px-nb=UGtezEZ854jbmFcvWGxLEA==
Click to expand...
Click to collapse
Thanks Man!
Hi all
Wasn't sure which was the proper link.
Ive been on here for ages lurking and getting tips.
Thats mybthank you
For S21+ (exynos) ?
My version (XSG)
I tried not work
Change to btu? Ch7?
No .. how can i change it?
Just flash the btu firmwere with odin