Database Info

[Guide] How to get rid of force encryption/dm-verity on Huawei MediaPad T3 10 (AGS-W0

I was frustrated by the huawei encryption and decided to get rid of it once and for all.
At first I faced many bootloops but i finally figured out what was going on. Formatting user data through TWRP is not enough because after booting the device, encryption is still there. This happens because the kernel encrypts the device when booting up. Simply modifying the boot.img file to remove file encryption also doesn't work because you still boot into an already encrypted stock user data. So the answer was pretty obvious by now.
The trick is to format data using TWRP AND THEN boot to bootloader to flash a modified boot without encryption. So let's get to it.
How to create a modified boot.img without file encryption/dm-verity
1. Find and download your current firmware from Huawei Firmware Finder Dtabase (Team MT), or from a source that you trust. (Using a firmware with different cust version or a different update will most likely not work).
2. Download Huawei Update Extractor and use it to extract the stock boot.img file from UPDATE.APP
3. Download ASSAYYED_KITCHEN.
4. Place your stock boot.img file in the "WORK" folder of ASSAYYED_KITCHEN.
5. Launch ASSAYYED and select the 12th option (KERNEL/RECOVERY MENU) and then the 1st one (Unpacking Kernel).
6. The ASSAYYED options don't work for me so i did it manually. Go to your work folder and open the folder boot_unpacked\ramdisk.
7. You will see a file named "fstab.qcom", open it using WordPad.
8. Find the line:
Code:
/dev/block/bootdevice/by-name/userdata /data f2fs nosuid,nodev,noatime,discard,inline_data,inline_xattr wait,check,fileencryption
and delete ",fileencryption".It should now look like that:
Code:
/dev/block/bootdevice/by-name/userdata /data f2fs nosuid,nodev,noatime,discard,inline_data,inline_xattr wait,check
9. (This step is optional,follow it only if you also want dm-verity removed) Use the same method to remove dm-verity.
Code:
/dev/block/bootdevice/by-name/system /system ext4 ro,barrier=1 wait, verify
/dev/block/bootdevice/by-name/vendor /vendor ext4 ro,barrier=1 wait, verify
/dev/block/bootdevice/by-name/product /product ext4 ro,barrier=1 wait, verify
(Just delete the ",verify" part.)
10. Save the file.
11. Launch ASSAYYED and select the 12th option (KERNEL/RECOVERY MENU) and then the 2nd one (Packing Kernel).
12. Follow the instructions below to properly flash your modified boot.img and get rid of encryption.
Removing file encryption/dm-verity from the device
1. Unlock your device.
2. Flash this TWRP on AGS-W09 or the appropriate custom recovery for your device.
3. Boot to TWRP and FORMAT user data (note that it is very important to format data and not just wipe it). •WARNING• this will delete all your data!
4. Go back to the reboot menu of TWRP and select reboot booloader (it's important to not allow your device to boot into system yet).
5. Using fastboot, flash your modified boot.img that you created earlier.
6. Reboot your device (you might get a bootloop on the first boot but force rebooting your device again by holding the power button will fix that).
7. After booting up, your device should not be encrypted anymore.
8. You can now use the root method that you like to root your device and internal storage should be visible on TWRP. TWRP backup should also work normally.
How to fix Magisk modules not showing up on Magisk Manager (! /data/adb/magisk_merge.img mount failed error)
I am not going to get into the technical staff you can find more info here
Edit: As of Magisk 19.0, the following method becomes obsolete. Magisk modules should now work as expected without issues. This method now concerns those who want to stick to an older version of Magisk
1. Download f2fsfix-2018.9.2.zip provided by VR25 on the thread above.
2. Download all the magisk modules that you need to flash and place them on your device.
3. Download the latest Magisk uninstaller along with the latest installer.
4. Boot to TWRP and flash Magisk uninstaller. (If you don't have Magisk already installed, skip this step)
5. Wipe Davlik Cache.
6. Install the latest Magisk.
7. Wipe Davlik Cache.
8. Flash the "f2fsfix-2018.9.2.zip" immediately followed by your modules.
9. Reboot (it should take more than usual).
10. Open Magisk Manager and check your Modules. Hopefully they'll show as installed and function correctly.
Note: This method should also work on similar devices. Just make sure you know how to recover your device in case something goes wrong.

I can confirm this worked for me. I was able to run a full nandroid, but haven't tried to restore. Wasn't running any magisk modules, so haven't tried that part of the guide. Flashed Xposed in TRWP and installed greenify, etc Seems to be working. So far no errors. Be warned, this is like a restore. You'll be starting from scratch again.
Also thanks for the boot image trick Thanostsak. I couldn't find stock fimware for my version (AGS-L03) anywhere. He suggested to use the Magisk's boot image backup. Worked like a charm. Still looking for AGS-L03 stock if anyone has one, knows where to get one please post!

TRS_80 said:
I can confirm this worked for me. I was able to run a full nandroid, but haven't tried to restore. Wasn't running any magisk modules, so haven't tried that part of the guide. Flashed Xposed in TRWP and installed greenify, etc Seems to be working. So far no errors. Be warned, this is like a restore. You'll be starting from scratch again.
Also thanks for the boot image trick Thanostsak. I couldn't find stock fimware for my version (AGS-L03) anywhere. He suggested to use the Magisk's boot image backup. Worked like a charm. Still looking for AGS-L03 stock if anyone has one, knows where to get one please post!
Click to expand...
Click to collapse
Glad it worked for you. Yes this is the downside. The device already comes with an encrypted userdata, so it needs to be formatted. So anything you do before that becomes obsolete. That's why this procedure is much more convenient when it happens after the unlock,when the userdata is wiped by the stock recovery to get a stock condition.

AGS-L09 LTE
I just followed your detailed guide to my tablet and finished all the processes perfectly.
Working..Twrp, Magisk, removed encryption & verify from boot.img and from Data successfully.
A big THANKS for your guide, links and trick all in one post!!!!.

Thanks for the info.
I am new to android (but have jailbroken iOS for years).
I have received a Huawei MediaPad T3 AGS-W09 (AGS-W09C100B278) today.
I have managed to unlock and install TWRP 3.2.1 but also want to install SuperSU, but of course the filesystem is encrypted, which brings me here.
I have searched all over for Huawei MediaPad T3 AGS-W09 (AGS-W09C100B278) firmware which contains boot.img but cannot find it. Even the rom on the AGS-W09 thread on this forum doesnt contain the .img file. Am I missing something ?
Any help is appreciated.
Thanks again

mr_fingy said:
Thanks for the info.
I am new to android (but have jailbroken iOS for years).
I have received a Huawei MediaPad T3 AGS-W09 (AGS-W09C100B278) today.
I have managed to unlock and install TWRP 3.2.1 but also want to install SuperSU, but of course the filesystem is encrypted, which brings me here.
I have searched all over for Huawei MediaPad T3 AGS-W09 (AGS-W09C100B278) firmware which contains boot.img but cannot find it. Even the rom on the AGS-W09 thread on this forum doesnt contain the .img file. Am I missing something ?
Any help is appreciated.
Thanks again
Click to expand...
Click to collapse
I strongly suggest using Magisk to root your device instead of SuperSU. The good thing about Magisk is that everything happens systemlessly, so it doesn't matter if the kernel is encrypted in order of it to work. If you still want to use SuperSU though, my guide should provide all the info you need.
To answer your question you can find two OTA firmware updates for your device here. If that doesn't work (if the OTA updates don't include the boot.img file ) i will let you know how to use magisk to get a copy of your current boot.img

Thanostsak said:
I strongly suggest using Magisk to root your device instead of SuperSU. The good thing about Magisk is that everything happens systemlessly, so it doesn't matter if the kernel is encrypted in order of it to work. If you still want to use SuperSU though, my guide should provide all the info you need.
To answer your question you can find two OTA firmware updates for your device . If that doesn't work (if the OTA updates don't include the boot.img file ) i will let you know how to use magisk to get a copy of your current boot.img
Click to expand...
Click to collapse
Thanks for the info.
I have been looking down the Magisk avenue too.
My plan is, decrypt is then root it.
I did download those firmware files earlier but as you say, no .img files.
I have tried to follow a guide on youtube from rootjunky but got as far as running the info gathering piece to gather mount points, but it fell over. Don;t know if thats because I was using adb sideloading via TWRP .. ?
I attempted to run the commands from the batch file direct but no joy.
It would be really appreciated if you could point me to a guide to extract the img. It's my day 1 of this device and Android (already voided warranty from Amazon within 1 hour ha) but as I say, I have experience in most of what is needed from my iOS jailbreaking and bringing phones back from bootloops and the brink of bricks.
When you mention rooting with Magisk .. Can that be achieved in the state my device is in now, which is TWRP'd but encrypted ?
I also notice the "Ultimate Backup Tool, No Root Required" thread (cant put URL's yet as I'm a n00b member). Could that export my boot.img ?
I am done for today. I am working from home and it the device got delivered at 9:30 ish. I was hacking around with it all day and did about 20 min work. I'm fried now :-O
Thanks again

mr_fingy said:
Thanks for the info.
I have been looking down the Magisk avenue too.
My plan is, decrypt is then root it.
I did download those firmware files earlier but as you say, no .img files.
I have tried to follow a guide on youtube from rootjunky but got as far as running the info gathering piece to gather mount points, but it fell over. Don;t know if thats because I was using adb sideloading via TWRP .. ?
I attempted to run the commands from the batch file direct but no joy.
It would be really appreciated if you could point me to a guide to extract the img. It's my day 1 of this device and Android (already voided warranty from Amazon within 1 hour ha) but as I say, I have experience in most of what is needed from my iOS jailbreaking and bringing phones back from bootloops and the brink of bricks.
When you mention rooting with Magisk .. Can that be achieved in the state my device is in now, which is TWRP'd but encrypted ?
I also notice the "Ultimate Backup Tool, No Root Required" thread (cant put URL's yet as I'm a n00b member). Could that export my boot.img ?
I am done for today. I am working from home and it the device got delivered at 9:30 ish. I was hacking around with it all day and did about 20 min work. I'm fried now :-O
Thanks again
Click to expand...
Click to collapse
I get what you are saying. Going from iOS to android is a big step. Since the firmware files don't contain the boot.img and having in mind that you want to decrypt, getting a boot.img file is a must.
There are ways to get the boot.img without root but the ones i tried don't work. But there is an easy way that i know of that requires installing Magisk. When you flash Magisk from TWRP it roots your device. However, apart from rooting it also creates a backup of your boot.img in case something goes wrong.
Decrypting requires formatting your device, so Magisk will be removed too. So its only purpose for now is to provide you with a boot.img file.
Here is what you need to do
1. Download the latest magisk installer from the magisk threat
2. Save the file in your SD card (internal storage is encrypted)
3. Flash the Magisk installer from TWRP
4. Boot your device and navigate to /data
5. There should be a stock boot_xxx.img.gs file in there. Copy it to your storage, move it to a computer and extract it. You should get a boot.img file that you could use to decrypt.
6. Follow my guide to decrypt the boot.img and then flash it from bootloader
7. Since your device is now formatted from the decryption, you can choose the root method that you like.

Thanostsak said:
I get what you are saying. Going from iOS to android is a big step. Since the firmware files don't contain the boot.img and having in mind that you want to decrypt, getting a boot.img file is a must.
There are ways to get the boot.img without root but the ones i tried don't work. But there is an easy way that i know of that requires installing Magisk. When you flash Magisk from TWRP it roots your device. However, apart from rooting it also creates a backup of your boot.img in case something goes wrong.
Decrypting requires formatting your device, so Magisk will be removed too. So its only purpose for now is to provide you with a boot.img file.
Here is what you need to do
1. Download the latest magisk installer from the magisk threat
2. Save the file in your SD card (internal storage is encrypted)
3. Flash the Magisk installer from TWRP
4. Boot your device and navigate to /data
5. There should be a stock boot_xxx.img.gs file in there. Copy it to your storage, move it to a computer and extract it. You should get a boot.img file that you could use to decrypt.
6. Follow my guide to decrypt the boot.img and then flash it from bootloader
7. Since your device is now formatted from the decryption, you can choose the root method that you like.
Click to expand...
Click to collapse
Makes total sense. I just installed Magisk now from SD, thing is, the only spare SD I had was 128MB !! So I dont know if the .img was saved correctly. I will look into it tomorrow. My other large SD is corrupted but I have a 32GB one in the dashcam I will use tomorrow.
That leads me to a question. Is the auto created .img saved on the card or the internal storage ? I am assuming its card but I could not see it.
Will look more tomorrow.
Thanks

mr_fingy said:
Makes total sense. I just installed Magisk now from SD, thing is, the only spare SD I had was 128MB !! So I dont know if the .img was saved correctly. I will look into it tomorrow. My other large SD is corrupted but I have a 32GB one in the dashcam I will use tomorrow.
That leads me to a question. Is the auto created .img saved on the card or the internal storage ? I am assuming its card but I could not see it.
Will look more tomorrow.
Thanks
Click to expand...
Click to collapse
It is actually on the internal storage. Now that you are rooted you can use a root file explorer to get it. (128mb should be enough for this task)

Thanostsak said:
It is actually on the internal storage. Now that you are rooted you can use a root file explorer to get it. (128mb should be enough for this task)
Click to expand...
Click to collapse
On it now before work
Extracted stock_boot_(IDremoved).img.gz which contains the img
Will run your guide against this img
---------- Post added at 09:20 AM ---------- Previous post was at 08:33 AM ----------
All done. Nice and easy
No issues other than sweaty palms on Huawei long boot screen after flash :silly:
No reboot loop and no Magisk errors
Much appreciated for the help

Correction,
Magisk is giving the the errors when installing modules.
Followed your guide and all good

mr_fingy said:
Correction,
Magisk is giving the the errors when installing modules.
Followed your guide and all good
Click to expand...
Click to collapse
Great! If you need anything feel free to ask.

Well... I followed your steps to remove force encryption and install Magisk, everything seems to be perfect. The Magisk and modules are funtional. However after reboot all modules are dispeared, but magisk is still recognized by magisk manager. I don't know where is the problem...
Model: AGS-W09
f2sffix version: 2018.10.9
magisk version: 17.2 (At first I used the latest 18.0 version, but after this problem appeared, I noticed that f2sffix-20181009 only support magisk version 17.2 or older, so I retry your method with magisk 17.2, but the problem remains.)

TimYuan said:
Well... I followed your steps to remove force encryption and install Magisk, everything seems to be perfect. The Magisk and modules are funtional. However after reboot all modules are dispeared, but magisk is still recognized by magisk manager. I don't know where is the problem...
Model: AGS-W09
f2sffix version: 2018.10.9
magisk version: 17.2 (At first I used the latest 18.0 version, but after this problem appeared, I noticed that f2sffix-20181009 only support magisk version 17.2 or older, so I retry your method with magisk 17.2, but the problem remains.)
Click to expand...
Click to collapse
You should use the latest version of f2sffix (10.9) and then follow the procedure again. After your first boot follow VR25's recommendation and you should be good to go.
VR25 said:
Those getting everything broken after a second reboot, try the following workaround...
After the first reboot (right after installing), remove </sbin/.core/img/f2fs*bla*bla/service.sh>, </data/adb/magisk_merge.img> and </cache/magisk_merge_.img>.
Note that after doing this, you'll only be able to install modules and update Magisk from TWRP.
Click to expand...
Click to collapse

Thanostsak said:
You should use the latest version of f2sffix (10.9) and then follow the procedure again. After your first boot follow VR25's recommendation and you should be good to go.
Click to expand...
Click to collapse
It works!!! You are my hero!

TimYuan said:
It works!!! You are my hero!
Click to expand...
Click to collapse
Glad it worked for you.
Kudos to VR25 for making this amazing module even though he is not personally benefited by it.

Thanostsak said:
Glad it worked for you.
Kudos to VR25 for making this amazing module even though he is not personally benefited by it.
Click to expand...
Click to collapse
what if there is no fstab.qcom in kernel but stored in vendor/etc partition?
i've already edited the fstab, but still my system partition become ro (read only) when i made a change in system. all file manager error even previously has root.
please take a look at attachment . thanks in advance

an-_-dro said:
what if there is no fstab.qcom in kernel but stored in vendor/etc partition?
i've already edited the fstab, but still my system partition become ro (read only) when i made a change in system. all file manager error even previously has root.
please take a look at attachment . thanks in advance
Click to expand...
Click to collapse
I believe that what you are missing is after changing forceencrypt=footer into encryptable=footer you should also do a full data format through TWRP.

Thanostsak said:
I believe that what you are missing is after changing forceencrypt=footer into encryptable=footer you should also do a full data format through TWRP.
Click to expand...
Click to collapse
encryption is not a problem. since the first place already done with that data partition.
my problem is system partition, every time i made a change to system (for example deleting chrome.apk), something triggered that makes my system weird (magisk forceclose, all file manager become malfunction because system become read only). something lock my system partition if system change.
i thought change fstab.qcom <mnt_flags and options> ro,errors=panic to >> errors=continue (deleting ro/read only) will change my system behaviour, but it's not

Samsung Xcover 4 SM-G390F Root Magisk + TWRP +Disable Encryption Oreo/Pie (2019/2020)

Hi,
Finally I had time to finish my work on Xcover 4. I couldn't disable ForceEncryption by any flashable tool so I prepared 2 version of firmware (Oreo and Pie), both prerooted (Magisk) and free from Force Encryption. Everything except boot.img left untouched, both ROMs are BTU so no brand.
Just flash it with Odin 3.13.3. I recommend to flash CSC_BTU instead of HOME_CSC_BTU. HOME BTU should work as well but then probably You gonna have to format data with TWRP. CSC_BTU is already tested and there are no problems with Encryption.
After flashing just install Lastest Magisk Manager. SafetyNet Passed.
Oreo: G390FXXU4BSB3_BTU_G390FBTU4BSC1_Patched_By_Chamelleon
Code:
https://mega.nz/#!ONoFTIhD!rBOhDR0j874zpyeLiDVwfwOcodRi5OhdxyF0ZTRMslE
PIE: G390FXXU4CSF9_BTU_G390FBTU4CSFA_Patched_by_Chamelleon
Code:
https://mega.nz/#!XBhnRCCY!_IOOtXcLsGZQfVY17JD4YxxzaAWJqy2NoxVSrsJRs5M
If You need TWRP (not necessary to flash this ROMs) flash this version:
TWRP: TWRP-3.1.1_SM-G390F_by_nemo-nemo
Code:
https://mega.nz/#!DIo1SSBT!w4dPPAF3BEcfQmsy7mANO33Lb5Gj4jzDkrrPfbH56uo
Working on both versions, Oreo and Pie. I didn't test backup and recovery options but flashing is working on both. ADB and MTP are not working.
To remove Security Log Agent notifications use SecurityLogAgent Disable. It will disable this annoying app completely.

Hello!
Can you explain because i would like only to root my phone in oreo 8.1 without losing apps and data. Is it possible with your method?
thank you for your answer.

Would anyone happen to know if I can use TWRP for SM-G390F's on SM-G390W's? (the only differences I know of between them are the supported LTE frequencies)

You can try to flash it, just backup your data and if something goes wrong just flash it with back with stock firmware.

Updated main thread

Hi mates
very interesting matter. Will like to make it from a ubuntu 18.04 system? Did someone had tried it ?

Yea, it's a normal ROM so you can flash it with Heimdal.

Chamelleon said:
Yea, it's a normal ROM so you can flash it with Heimdal.
Click to expand...
Click to collapse
thank you C for this fast answer .
Here is the second point :
IS this rom free from google , I mean enough
And the third
any visible amelioration from the XCOV 2 Model in battery standing . I do not care about photos for my purpose .
Only memory, increased by SD, and lasting time

It's completely stock rom without any modifications except integrated Magisk and disabled force encryption. Rest is untouched.

I don't understand what file I should use to flash with Odin.. in the link you posted sends to a download of a zip file of almost 2gb in which there are many files, so from those files which one should I set in Odin?

Flash it like any other stock ROM:
BL file in BL
AP file in AP
CP file in CP
CSC_BTU file in CSC

Everything works great:]
Thanks man.

Hi Chamelleon and thanks for all the effort you've made already!
I successfully flashed the Pie variant of the two ROMs and got it to work. However, turned out that in an app that I'm developing, for some reason, when my device is equipped with G390FXXU4CSF9_BTU_G390FBTU4CSFA, the app doesn't behave in the same way as when G390FXXU4CSF9_ G390FXEO4CSFA has been installed. That's why I would like to be able to root the XEO-version of the firmware. Moreover, there will be many other non-rooted devices equipped with the XEO-version using the app in the near future.
Having flashed my device with G390FXXU4CSF9_ G390FXEO4CSFA, I tried installing the version of TWRP you have provided but I can't figure out how to install Magisk from there. By default, TWRP can't find the Magisk zip-file that I push onto the device. I tried formatting data, as per this post. The post lead me to believe that the files could be found after formatting but even though there were now plenty of TWRP-related folders, I couldn't find the zip. And as ADB and MTP don't seem to work in recovery mode, I'm unable to get the zip file on board after formatting. Booting to system doesn't work either after allowing modifications for TWRP, which might be due to dm-verity preventing boot, but franky I don't understand much of that topic.
You mentioned that you couldn't disable Force Encryption with any flashable tool. Is that the reason why TWRP (or any other tool) couldn't reach the zip file for Magisk?
This is the first time I've attempted rooting a phone so my knowledge regarding the topic is pretty basic.
So I suppose preparing a prerooted and Force Encryption free version of the firmware might be a possibility? I have no idea how to patch a ROM though. Any advice on how to proceed?

Hi, I had no time to play with this during Christmas. If you send me your boot.img I can modify it for you. If You just flash magisk with TWRP it will root your phone but after first reboot whole data partition will be encrypted again and you wont be able to flash anything with twrp or modify data partition without full wipe. For some unknown reason this and probably more Samsung models have different structure of files responsible for encryption and because of this none of pre-made patches are working. Only manual kernel modification can safe from encryption, at least for now.
I'm not a developer so I don't know how to prepare patch for this to allow anyone to flash it, I just found few lines of code in kernel You need to modify to disable encryption.

Chamelleon said:
Hi, I had no time to play with this during Christmas. If you send me your boot.img I can modify it for you. If You just flash magisk with TWRP it will root your phone but after first reboot whole data partition will be encrypted again and you wont be able to flash anything with twrp or modify data partition without full wipe. For some unknown reason this and probably more Samsung models have different structure of files responsible for encryption and because of this none of pre-made patches are working. Only manual kernel modification can safe from encryption, at least for now.
I'm not a developer so I don't know how to prepare patch for this to allow anyone to flash it, I just found few lines of code in kernel You need to modify to disable encryption.
Click to expand...
Click to collapse
Hi, I really appreciate the help!
I sent the boot.img to your paypal donation email. Let me know if you want me to send it to you some other way.

How to flash firmware on linux?
I know that i have to use heimdall but how to load these files into the program because filenames say basically nothing to me.
Thanks in advance.
Also does it delete user data?

SpurguX said:
Hi, I really appreciate the help!
I sent the boot.img to your paypal donation email. Let me know if you want me to send it to you some other way.
Click to expand...
Click to collapse
1. Flash clean ROM, same as boot you send me)
2. Enable OEM Unlock in Developer settings
3. Flash patched boot with Odin as AP/PDA.
4. Install Magisk Manager app
5. Install TWRP and format data partition, option where you need to type "YES"
6. Reboot system and then back to TWRP. If you can mount data and there are no errors it's done.
AndroidBroker said:
How to flash firmware on linux?
I know that i have to use heimdall but how to load these files into the program because filenames say basically nothing to me.
Thanks in advance.
Also does it delete user data?
Click to expand...
Click to collapse
Sorry but I never had a chance to use Heimdall. You can't dirty flash this because when your phone is encrypted and you can't replace kernel corrupting data.

But do I lose my data(Apps settings etc.)?
I'm OK with setting everything up back ,but it would be cool if it kept data.
(I'm going to use other computer that has windows on it btw, and I'm going to flash it with odin)

If your data partition is encrypted you gonna corrupt it by changing kernel. It means You wont be able to access, so yes, you will loose it.

What you mean by encryption some option in the Android or what?
If that's what you mean I haven't set up anything like this

August Security Patch Rolling Out

[Global] Mi A2 Lite V11.0.10.0.QDLMIXM rolling out!

Wow. That's gotta be some kind of record for Xiaomi
Mine is only 13M though. Must be a tiny update.

Wow! First time ever that this Android One device is actually up to date security wise.
Yes, from July update only 13MB.

Maybe it was there before, but after updating I noticed a native screen recorder icon.
Updated: It is not native. I have a screen recorder app installed.

Direct share not yet available.

penahj said:
Maybe it was there before, but after updating I notice a native screen recorder icon
Click to expand...
Click to collapse
strange i dont have this one and never had screen recording option

Antho02 said:
strange i dont have this one and never had screen recording option
Click to expand...
Click to collapse
You are right. It's not a native app. I have a screen recordering app installed. Sorry for the wrong news.

Does someone know how to install an OTA Update without using the System Update App? It always says Installation Problem. Installation failed.
I'm rooted with magisk, that's the reason i guess.
I found the 13mb Update as a zip file, but it's not flashable via twrp... Any Suggestions?
Best regards
Alex

Alibabara said:
Does someone know how to install an OTA Update without using the System Update App? It always says Installation Problem. Installation failed.
I'm rooted with magisk, that's the reason i guess.
I found the 13mb Update as a zip file, but it's not flashable via twrp... Any Suggestions?
Best regards
Alex
Click to expand...
Click to collapse
+1 I am also looking for this

Alibabara said:
Does someone know how to install an OTA Update without using the System Update App? It always says Installation Problem. Installation failed.
I'm rooted with magisk, that's the reason i guess.
I found the 13mb Update as a zip file, but it's not flashable via twrp... Any Suggestions?
Best regards
Alex
Click to expand...
Click to collapse
with twrp/magisk i always do
1-xiaomiflash rom (keep user files)
2-boot and install twrp
3-boot and install magisk
no problem this way

Antho02 said:
with twrp/magisk i always do
1-xiaomiflash rom (keep user files)
2-boot and install twrp
3-boot and install magisk
no problem this way
Click to expand...
Click to collapse
So you Flash the whole Rom (~1.2gb) and not just the Update?
I would like to find a way to Flash just the Update since your method is taking too long for me...
Best regards
Alex

If you only have Magisk, the standard process should work for you.
https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-proper-support-ota-t3836952
If it's not working and you have somehow modified some other partition, it will be written to the logcat.
adb logcat | grep update_engine

My Problem is, even with magisk 'uninstalled' the Update App from xiaomi still says 'Installation failed: Installation Problem'
That even happens with totally Stock rom, no root and no twrp.
I dont know why. But is there any other way to Update manually without flashing the whole Big Rom file? Just the Update file...
There must be a reason why there is an update file in zip Format which is 13mb Big.
Best regards
Alex

Alibabara said:
My Problem is, even with magisk 'uninstalled' the Update App from xiaomi still says 'Installation failed: Installation Problem'
That even happens with totally Stock rom, no root and no twrp.
I dont know why. But is there any other way to Update manually without flashing the whole Big Rom file? Just the Update file...
There must be a reason why there is an update file in zip Format which is 13mb Big.
Best regards
Alex
Click to expand...
Click to collapse
Alex, You don't have to flash the whole big rom file, but you do have to download it though. You can get it from here: https://mirom.ezbox.idv.tw/en/phone/daisy/roms-global-stable/
You then have to extract the files that you need with payload_dumper which you get from here:
https://androidfilehost.com/?fid=818070582850510260
NB that is the Windows 64bit version so make sure that is the OS your pc is using.
You then have to find which partition it is that is causing the problem for which you have to use a1291762's advice:
Code:
adb logcat | grep update_engine
and read very carefully through the results because the offending entry will be difficult to spot amongst the dozens of others.
You then flash the partition mentioned in the logcat. For example if 'system' is mentioned in the logcat as having an incorrect hash (that is always the reason for the failures) you would have to extract 'system.img' with payload_dumper and run
Code:
fastboot flash system system.img
Then try the update again. If it works you will also probably have to reinstall Magisk from scratch again as flashing system will probably remove it.
Yes it is complicated - far too complicated, but the simple measure you call for - just flash an update file - has, to the best of my knowledge never been possible, so there must be some reason why that is so, but I don't know what it is.
Incidentally, the reason I am able to respond to this question is that I had a torrid time yesterday trying to update my A2 lite on which I had not one, but 3 errors. aboot hash incorrect, system hash incorrect, and before any of that the normal Magisk uninstall told me it had no images to restore and so had to be uninstalled completely. It took me hours and it wasn't that much fun.

Alibabara said:
There must be a reason why there is an update file in zip Format which is 13mb Big.
Click to expand...
Click to collapse
The update is only 13M because it contains only changes. But for that to work, your partitions must be unmodified.
The larger update zip has complete partitions so it can work even if you have changes. You may be able to do the recovery update method with that file...
The even larger fastboot image has every partition.

thanks everyone for the help!
I did it as you said viking777 and it worked.
It's sad, that for an 13mb update this procedure is necessary, but thats how it is..
So thanks again everyone for the help

Antho02 said:
with twrp/magisk i always do
1-xiaomiflash rom (keep user files)
2-boot and install twrp
3-boot and install magisk
no problem this way
Click to expand...
Click to collapse
Can I do this with out installing TWRP as I haven't installed it already.

Aadil Gillani said:
Can I do this with out installing TWRP as I haven't installed it already.
Click to expand...
Click to collapse
sure, even more quick if u dont need twrp
flash last rom with xiaomi flash (save user data selected)
then boot patched.img and install magisk, less than 10 mins and no need to worries about uninstall magisk or any mod before

Antho02 said:
sure, even more quick if u dont need twrp
flash last rom with xiaomi flash (save user data selected)
then boot patched.img and install magisk, less than 10 mins and no need to worries about uninstall magisk or any mod before
Click to expand...
Click to collapse
I have some questions it would be a be a pleasure if you could answer.
Q1 will the modules remain or not ?
Q2 how to make make patched boot img I mean should I make my self using Magisk Manager app
Q3 Also which TWRP do you use and if it has any problems
Q4 should I use zip file or tgz for mi flash

A buggy twrp for A60, but not sure for M40.

I have made and got a buggy twrp for A6060, which is the Chinese version of M40, based on android-11. It can startup but lacking mtp and usb. It can't decrypt the /data too so you should do some preparations before can use it. I am not sure whether it can be used on M40.
Usage in shorts:
① Magisk and root. You can find the guide in this forum so I will pass it.
② Using a file manager to access /system/vender/etc/fstab.qcom, in the part of /userdata delete the field of "fileencryption=ice" (usually sth. like this, not includes the quotation marks), same and quit.
③ Enter recovery and wipe data. Then use odin flash this recovery: Just zip it to .tar file then flash in the AP slot.
④ When startup, press VOLUMN UP ＆ POWER. If everything goes well, you will see the logo of twrp and enter it and can successfully access the files in /data. Then you can copy some gsi and have a try.
Click to expand...
Click to collapse
Hope it will be helpful and I really hope somebody can make it a ture and full device tree. That will definetely benefit both A60 and M40 users.
The twrp for A60: https://github.com/Jason-summer/Action-Recovery-builder
The source of the twrp: https://github.com/Jason-summer/device_samsung_a60q/tree/android-11
Sorry for my poor English if causing someone confused.

good job! Is it possible to flash a phone using this? (i have a60)

blankkk123 said:
good job! Is it possible to flash a phone using this? (i have a60)
Click to expand...
Click to collapse
It works for me. But you should decrypt your phone first before you try to flash sth. or you may found /data a pile of random code.

SummerElement said:
It works for me. But you should decrypt your phone first before you try to flash sth. or you may found /data a pile of random code.
Click to expand...
Click to collapse
If it's not difficult, can you please write instructions? I think this will help many who want to flash

How To Guide Installing a custom recovery, and disabling encryption in the system.

Hello everyone.
If you want to have a recovery with the ability to backup/restore, this instruction is for you.
Here are recovery, while they do not know how to encryption of data section (I hope we will have such ones sometime).Yes, recovery already patched by magisk 25.2
Download the patch, copy it to the SD card (if you have it) or to a USB flash drive, for firmware by otg.
We set the recovery in fastboot mode with the command:
fastboot flash boot (recovery name).img
We load into the recovery, flash the patch, and make FORMAT DATA.
Attention!!!This will delete all your settings and installed programs, including deleting everything from the internal memory.
After that, we boot into the system, configure and "rejoice", now the recovery will see data and, accordingly, internal memory.
And yes, if you have a security thing, this procedure disables the encryption of your data
COMPLETELY, THAT IS, COMPLETELY.
Oh, I forgot, although I think it's clear by the name of the recovery, they (recovery) are designed for firmware on Android 12.
Download files:
RECOVERY

Guys, one jamb got out here, my system has been transferred to RW, and I checked the script on such a system. As it turned out, the script does not work on the stock system. So, in order for it to work normally, you need to first transfer the system to RW

Any chance to explain step by step?

reosm said:
Any chance to explain step by step?
Click to expand...
Click to collapse
What exactly?
In the post everything is written as to put.

There are 2 img in the recovery file, which one will be loaded before or after

reosm said:
There are 2 img in the recovery file, which one will be loaded before or after
Click to expand...
Click to collapse
one is TWRP recovery and the other is Orange Fox recovery, choose which one you want to use, just flash one of them.

Hey does twrp/orangefox actually work on this phone. I've heard that those are currently under development. And does flashing these .img require wipe data or can they work with sd card or OTG?

Soma Das said:
Hey does twrp/orangefox actually work on this phone. I've heard that those are currently under development. And does flashing these .img require wipe data or can they work with sd card or OTG?
Click to expand...
Click to collapse
Recovery can work with both sd and otg. While they cannot decrypt the data, but if you transfer the system to RW, and flash the patch to disable encryption in the system, then everyone will see the recovery.

Who has a system in RO, you can use these, checked, it also works
[A/B][A-ONLY][SCRIPT][READ-ONLY][EROFS][ANDROID 10+] Universal Disable Force Encryption for RO and RW "NEO STABLE"
Disable Force Encryption NEO Do you all know what DFE is? no? Anyway. Basically, your device has an encrypted data section "/data" by default. Let's look at the advantages of google's solution that we will lose after disabling encryption: -...
forum.xda-developers.com

arraki said:
Recovery can work with both sd and otg. While they cannot decrypt the data, but if you transfer the system to RW, and flash the patch to disable encryption in the system, then everyone will see the recovery.
Click to expand...
Click to collapse
Can it backup anything such as boot.img, vendor etc?

Soma Das said:
Can it backup anything such as boot.img, vendor etc?
Click to expand...
Click to collapse
Probably you can, but why. A backup of the datа section is enough for normal recovery. Of course, you can also make a backup of the super section if you changed something in it.

arraki said:
Probably you can, but why. A backup of the datа section is enough for normal recovery. Of course, you can also make a backup of the super section if you changed something in it.
Click to expand...
Click to collapse
Do I need to flash disable dm Verity?

Soma Das said:
Do I need to flash disable dm Verity?
Click to expand...
Click to collapse
In the first post, everything is written.

does it work for Mediatek cpu install on the Note 11 pro plus 5g?

Christ_soyo said:
does it work for Mediatek cpu install on the Note 11 pro plus 5g?
Click to expand...
Click to collapse
MediaTek chip on is Redmi note 11 pro. It wilont work and you will get soft brick.

Christ_soyo said:
does it work for Mediatek cpu install on the Note 11 pro plus 5g?
Click to expand...
Click to collapse
What exactly works?

Do we need to unlock the bootloader firtst before we flash the recovery, right?

derjango said:
Do we need to unlock the bootloader firtst before we flash the recovery, right?
Click to expand...
Click to collapse
Of course

After using this patch my device doesn't know how to be case sensitive, which makes some apps have weird errors with read and write functions

nimade2333 said:
After using this patch my device doesn't know how to be case sensitive, which makes some apps have weird errors with read and write functions
Click to expand...
Click to collapse
This is clearly not because of the patch, I have put it on for a long time, and there are no problems. Yes, and he only disables encryption in the system, how can he influence this.