Oneplus 7 Pro OxygenOS 10.0.1GM21AA TWRP 0MB can't mount data - OnePlus 7 Pro Questions & Answers

Hello,
today I got the official Android Q Update for my Oneplus 7 Pro.
Since my phone was rooted, I downloaded the whole update, let it install and didn't reboot.
Then I installed Magisk over the Magisk app to the other partition.
After that I flashed TWRP as module via Magisk and flashed Magisk.zip again via Magisk.
Then I rebooted my phone and it was rooted as expected. The problem is, my TWRP has no access to my sdcard.
A week ago I installed already the OxygenOS 10.0.0 for testing purposes and had the same problem. I didn't focused on the TWRP problem because I went back the same day to OxygenOS 9. Since I have now the official OxygenOS 10 I would prefer a working TWRP.
Any possibilities to get TWRP working or do we have to wait until TWRP rolls out an update?
I read severel posts of people who got TWRP running but these are from the Beta and I am not shure if running only means that TWRP is on the phone even if it can't acces the sdcard.
Thank you very much.

The unofficial twrp 70 works well for me. Just search in the forum.

shan_pei said:
The unofficial twrp 70 works well for me. Just search in the forum.
Click to expand...
Click to collapse
Thank you for your reply. I tried the TWRP 70 but I still can't mount the storage...

Related

[Newbie Question]TWRP gone after OTA update OSS 5.1.6

I have an oneplus 6 with official OSS 5.1.5 and TWRP installed. But after OTA update my phone to OSS 5.1.6, i cannot boot to TWRP anymore. Is TWRP gone after OTA update? My OEM unlocking still unlocked.
Have u not read anything in these forums, tutorials or anything?
There are like 50 threads on how to upgrade and about the new partitions for op6, it is even clear when u installed twrp too
dRakeNNNN said:
I have an oneplus 6 with official OSS 5.1.5 and TWRP installed. But after OTA update my phone to OSS 5.1.6, i cannot boot to TWRP anymore. Is TWRP gone after OTA update? My OEM unlocking still unlocked.
Click to expand...
Click to collapse
Hi, just to clarify when you install an OTA on the oneplus 6 it uses the new partitioning system which is different so to remedy the situation just try reflashing TWRP enchilada installer using fastboot.
cschmid44 said:
Hi, just to clarify when you install an OTA on the oneplus 6 it uses the new partitioning system which is different so to remedy the situation just try reflashing TWRP enchilada installer using fastboot.
Click to expand...
Click to collapse
Previously, i've installed Beta(unofficial) version of TWRP, now i want to re-install TWRP with Official version , do i need to remove or do something firstly?
To fix it just download the official TWRP for oneplus 6 from the official team win recovery project page and then you put that on your phone, and flash using your currently installed TWRP then after that make sure you also install the root package as installing the new version of TWRP will modify the new boot image, Also a good time to mention that it will install in both slots (Seamless update slots) Treble slots if you will just to be aware.
cschmid44 said:
To fix it just download the official TWRP for oneplus 6 from the official team win recovery project page and then you put that on your phone, and flash using your currently installed TWRP then after that make sure you also install the root package as installing the new version of TWRP will modify the new boot image, Also a good time to mention that it will install in both slots (Seamless update slots) Treble slots if you will just to be aware.
Click to expand...
Click to collapse
Thank you for your reply, but my problem is i cannot boot into TWRP after OTA upgrade my OSS from 5.1.5 to 5.1.6
dRakeNNNN said:
Thank you for your reply, but my problem is i cannot boot into TWRP after OTA upgrade my OSS from 5.1.5 to 5.1.6
Click to expand...
Click to collapse
Just follow one of the many upgrade guides. Skip the part about upgrading to 5.1.6 but for the rest follow the steps exactly. No need to explain all this in yet another thread imo. You'll need a pc though.
that's would be great if twrp can be flashed and stays there without wiping as well as root.
Pleasssseeeeee read before creating a new thread
dRakeNNNN said:
I have an oneplus 6 with official OSS 5.1.5 and TWRP installed. But after OTA update my phone to OSS 5.1.6, i cannot boot to TWRP anymore. Is TWRP gone after OTA update? My OEM unlocking still unlocked.
Click to expand...
Click to collapse
Wait!
Don't install 5.1.6 ROM because OP has retired it. The last version availabe on OP site is the 5.1.5.
MuttleyMB said:
Wait!
Don't install 5.1.6 ROM because OP has retired it. The last version availabe on OP site is the 5.1.5.
Click to expand...
Click to collapse
I'm using 5.1.6, so far so good. I don't have any issue on 5.1.6. ?
Sent from my OnePlus6 using XDA Labs
dRakeNNNN said:
Thank you for your reply, but my problem is i cannot boot into TWRP after OTA upgrade my OSS from 5.1.5 to 5.1.6
Click to expand...
Click to collapse
You can't boot into twrp because it's not there anymore. The OTA created a completely stock version of the OS that you're now booted on. You need to reinstall twrp and magisk according to the posted guides. This is going to be the case with all OTAs. The stock updater looks for root, and when it's there, it installs a complete OS, not an incremental update.

Which version of TWRP bluespark?

I just currently got the latest ota and let it install and I installed magisk from the manager by choosing to install to inactive partition after ota. That worked flawlessly and was able to keep root. But I lost TWRP of course. I was using the official TWRP. I've been noticing everyone going to TWRP bluespark recovery. But which one do I download??? From what I understand there is a version for oos android 8 Oreo and a version for oos android 9 pie. I'm on official oos pie. So which one do I need?
vinnievegas said:
I just currently got the latest ota and let it install and I installed magisk from the manager by choosing to install to inactive partition after ota. That worked flawlessly and was able to keep root. But I lost TWRP of course. I was using the official TWRP. I've been noticing everyone going to TWRP bluespark recovery. But which one do I download??? From what I understand there is a version for oos android 8 Oreo and a version for oos android 9 pie. I'm on official oos pie. So which one do I need?
Click to expand...
Click to collapse
Just take the latest official TWRP and you are fine. Trust me.
https://dl.twrp.me/enchilada/
Thank you. But still would like to know if I decide to use bluespark version.
Sure. If you want to use Blu Spark TWRP use this one twrp-3.2.3-x_blu_spark_v9.86_op6
IMG and zip files are here https://forum.xda-developers.com/devdb/project/?id=27466#downloads
You can use TWRP official or Blu Spark TWRP. What ever you like. Blu Spark is recommended for people coming from oos beta to stable
Pundy said:
Just take the latest official TWRP and you are fine. Trust me.
https://dl.twrp.me/enchilada/
Click to expand...
Click to collapse
Pundy said:
Sure. If you want to use Blu Spark TWRP use this one twrp-3.2.3-x_blu_spark_v9.86_op6
IMG and zip files are here https://forum.xda-developers.com/devdb/project/?id=27466#downloads
You can use TWRP official or Blu Spark TWRP. What ever you like. Blu Spark is recommended for people coming from oos beta to stable
Click to expand...
Click to collapse
May I ask what the difference is?
Just to add a note to you for next ota.
After ota is installed go to magisk manager
Press download
Search for twrp a/b
Install (don't reboot)
Now go to main screen and press install
Choose to inactive slot (after ota)
This way you keep both twrp and root
Happy flashing
vinnievegas said:
May I ask what the difference is?
Click to expand...
Click to collapse
To be honest I don't know the differences between both.
vinnievegas said:
May I ask what the difference is?
Click to expand...
Click to collapse
You can find answer at its topic.
whizeguy said:
Just to add a note to you for next ota.
After ota is installed go to magisk manager
Press download
Search for twrp a/b
Install (don't reboot)
Now go to main screen and press install
Choose to inactive slot (after ota)
This way you keep both twrp and root
Happy flashing
Click to expand...
Click to collapse
Awesome!!!!! That's definitely a game changer!!
Thank you.
Hey, I have unlocked bootloader and have magisk installed.
But every time I have to go to bootloader to boot into twrp because of some issue.
I have the zip and img file of twrp by bluspark.
I have the img of bluspark twrp now I need to know which sector should I need to install. Boot, system or vendor? Please tell me. I'm new here.
there is a problem with magisk 20.1, first boot after all flashes is ok and magisk is working but after I giving root access to first program and going for restart its not booting and going to bootloader.
chetbiz said:
there is a problem with magisk 20.1, first boot after all flashes is ok and magisk is working but after I giving root access to first program and going for restart its not booting and going to bootloader.
Click to expand...
Click to collapse
Which OOS version are you running? Pie or Q?
Koeties said:
Which OOS version are you running? Pie or Q?
Click to expand...
Click to collapse
Android Q final
Hello, I have problem. I´m on Android 11, with OOS 11.1.2.2, but I can´t install TWRP - twrp-3.6.0_11-0-enchilada.img. When I wrote fastboot boot twrp-3.6.0_11-0-enchilada.img, it is stuck on logo a nothing happen. Please how to boot in twrp?
Thank you.

Magisk flashing isn´t working with latest TWRP (v3.1.1-1)

I was trying to root several roms for hours! with latest TWRP version, no matter wich method I used, the result was always a non-rooted device.
After too much hours, I decided to go back to TWRP 3.1.1-0, and it rooted my phone at once (MIUI v11 Android 10.0).
SO, dont try to root anything with latest TWRP because it simply doesnt work to root.
(apparently wasnt working due to Multirom, I have to do some tests)
I hope this help some guy wich is going crazy trying to root Android 10 (or older).
Magisk 20.0 with twrp 3.3.1-1 worked perfectly fine for me. I did it on xiaomi.eu miui11 - android 10.
malimukk said:
Magisk 20.0 with twrp 3.3.1-1 worked perfectly fine for me. I did it on xiaomi.eu miui11 - android 10.
Click to expand...
Click to collapse
Hmmm... No way for me ?
Worked as always for me. Used the official version from the homepage and flashed magisk version 20 with it.
No problems so far, everything works fine. Safety net passes also.
Did you get any error messages when flashing?
kleinholzinferno said:
Did you get any error messages when flashing?
Click to expand...
Click to collapse
No, the process ends without any error, but Magisk Mgr doesnt detects to be rooted.
Maybe was a multirom error (as primary rom) but have so do some tests .

TWRP on Android 10

After recently bricking my Oneplus 6 by trying to flash the latest TWRP on the latest Android 10 OTA from Oxygen Updater, I found a post from official TWRP explaining how root with a10 will take a while to implement due to changes that Google has made to their partitions.
So I guess for anyone trying this out on their own, be warned. You will probably end up bricking your device like I did and will probably end up having a bad time.
Please correct me if i'm wrong though, peace!
Edit: can confirm fastboot flash boot twrp-3.3.1-11-enchilada-Q-mauronofrio.img from the other popular post is working!
If you already have a working TWRP on OOS 9 you should be fine as long as you flash a working TWRP afterwards. Blu_spark TWRP 9.101 is compatible (please not 9.101 no earlier version will work).
Also don't use Magisk 20 only 20.1.
There is already a pre-patched version out there. You can fastboot flash it (as fastboot boot doesn't work). An easier way (without a pre-patched version) is currently being worked one as you pointed out already
just updated to a10
boot into twrp, flash new bluspark twrp
flash FULL ota a10 image
reflash twrp
reboot into twrp
boot into system
boot back to twrp
install magisk 20.1
a10, twrp and root working
Hi,
I am on 9.0.9 stable with root using magisk. Is it possible to update to android 10 without loosing data and root??
nightfury04 said:
Hi,
I am on 9.0.9 stable with root using magisk. Is it possible to update to android 10 without loosing data and root??
Click to expand...
Click to collapse
havent lost data and you can root again
Blu_spark twrp
could you please provide link for blu_spark twrp img, zip files that work with android 10?
akri1337 said:
havent lost data and you can root again
Click to expand...
Click to collapse
Did you uninstall Magisk in stable 9.0.9 before updating to andeoid 10?
nightfury04 said:
Did you uninstall Magisk in stable 9.0.9 before updating to andeoid 10?
Click to expand...
Click to collapse
nope
akri1337 said:
havent lost data and you can root again
Click to expand...
Click to collapse
akri1337 said:
nope
Click to expand...
Click to collapse
It would be of great help if you could provide link to working TWRP with android 10.
https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965/page222
i used this one
akri1337 said:
https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965/page222
i used this one
Click to expand...
Click to collapse
Which build did u use mate? R108 is not working with android 9, I tried flashing it using my older installed twrp.
It says unsupported android version. And in github r108 says only for android 10.
r108 is the kernel not twrp
https://github.com/engstk/android_device_oneplus_enchilada/releases/tag/v9.107
akri1337 said:
r108 is the kernel not twrp
https://github.com/engstk/android_device_oneplus_enchilada/releases/tag/v9.107
Click to expand...
Click to collapse
Thanks again mate.. I will give this one a try.
there is a problem with Magisk 20.1, after all flashes the system is booting ok with Magisk working but after I give first program root access and rebooting its stuck on bootloader and not booting to system.
nightfury04 said:
Thanks again mate.. I will give this one a try.
Click to expand...
Click to collapse
I can confirm that this is working for me. I successfully upgraded from Android 9, Oxygen OS 9.0.9 to Android 10, Oxygen OS 10. Steps that I followed :
1) Flashed new twrp from link in the above post by akri1337 using my previously installed twrp : bluspark 9.85.
2) Flashed Oxygen OS 10 full update and added to queue latest bluspark twrp which I flashed in step one as it would be overwritten by flashing the full OTA update.
3) Rebooted into recovery again to switch to active slot.
4) Flashed Magisk 20.2 to regain root.
This process successfully upgraded my Oneplus 6 without any data loss.
Please note that I disabled all magisk modules just to be safe before starting the upgrade process but didn't uninstall magisk. I was on Magisk 20.2 earlier.
Hope this helps everyone.
nightfury04 said:
I can confirm that this is working for me. I successfully upgraded from Android 9, Oxygen OS 9.0.9 to Android 10, Oxygen OS 10. Steps that I followed :
1) Flashed new twrp from link in the above post by akri1337 using my previously installed twrp : bluspark 9.85.
2) Flashed Oxygen OS 10 full update and added to queue latest bluspark twrp which I flashed in step one as it would be overwritten by flashing the full OTA update.
3) Rebooted into recovery again to switch to active slot.
4) Flashed Magisk 20.2 to regain root.
This process successfully upgraded my Oneplus 6 without any data loss.
Please note that I disabled all magisk modules just to be safe before starting the upgrade process but didn't uninstall magisk. I was on Magisk 20.2 earlier.
Hope this helps everyone.
Click to expand...
Click to collapse
Which magisk? Ver 20.1 ?
Why is it that I get an error when trying to flash the full OTA update using TWRP? Something about error 7 and not have a digest file. Is there a full OTA update file that everyone is using? I tried the signed full zip from here on XDA and the one from Oxygen Updater. I get the same error with both.
GunFishin said:
Why is it that I get an error when trying to flash the full OTA update using TWRP? Something about error 7 and not have a digest file. Is there a full OTA update file that everyone is using? I tried the signed full zip from here on XDA and the one from Oxygen Updater. I get the same error with both.
Click to expand...
Click to collapse
Had this error too and couldn't flash it with twrp, flashed successfully OTA file from oxygen -> Local upgrade
chetbiz said:
Had this error too and couldn't flash it with twrp, flashed successfully OTA file from oxygen -> Local upgrade
Click to expand...
Click to collapse
Still confused as to how everyone else can flash these zip files through TWRP and I cannot.
I'm currently Magisk rooted and have TWRP installed. Will I lose root and TWRP when updating through the local upgrade method?
GunFishin said:
Still confused as to how everyone else can flash these zip files through TWRP and I cannot.
I'm currently Magisk rooted and have TWRP installed. Will I lose root and TWRP when updating through the local upgrade method?
Click to expand...
Click to collapse
Yes, you will need to flash twrp with adb and going through the hole process of installing twrp and magisk, but for me its not worked well, after first boot to Android Q with magisk 20.1 and granting some apps root access when I rebooted the phone its not booting to system and going to bootloader, I think its related to some problem with magisk 20.1.

OTA with root and TWRP

Dears,
I have a OnePlus 6 unlocked and rooted with magisk and TRWP.
Currently I'm running stock firmware: oxygenos 10.3.
I got a message from system to update to 10.3.1.
Last time (when I have to update to 10.3) I tried to update in every way but without success and at the end I had to format everything and I lost my data.
So here is my question: which is the correct procedure to update software?
Thanks!
Look in TWRP and Root for OnePlus 6 on Oxygen OS 10 Stable/Beta thread
So you need to download latest Oxygen zip which is 042 buil if I'm not wrong...put it on your phone if you already didn't done that...then reboot to TWRP...and here starts the procedure....I HIGHLY RECCOMEND TO DO A WIPE WITHOUT FORMATTING INTERNAL STORAGE ONLY DATA...FOR AVOIDING ISSUES...but you can go without it...so here we start
Boot into twrp
Flash oxygen os zip(latest)
Flash twrp
Reboot to twrp(if it says no os installed just ignore it and swipe reboot anyway)
Flash magisk
and your done...thats it...nothing could go wrong.... I'm always doing it this way....
ilpratti said:
Dears,
I have a OnePlus 6 unlocked and rooted with magisk and TRWP.
Currently I'm running stock firmware: oxygenos 10.3.
I got a message from system to update to 10.3.1.
Last time (when I have to update to 10.3) I tried to update in every way but without success and at the end I had to format everything and I lost my data.
So here is my question: which is the correct procedure to update software?
Thanks!
Click to expand...
Click to collapse
For me, the phone downloaded the whole package instead of just the little OTA. I let it install it, bit did not let it restart it. Then I went to magisk modules and installed "twrp-keep". Then in magisk manager I had it install magisk on the other slot. Then I restarted the phone. Everything worked great.
tabletalker7 said:
For me, the phone downloaded the whole package instead of just the little OTA. I let it install it, bit did not let it restart it. Then I went to magisk modules and installed "twrp-keep". Then in magisk manager I had it install magisk on the other slot. Then I restarted the phone. Everything worked great.
Click to expand...
Click to collapse
Try this method... im also done my update like this!
my way of doing it
Here's what i did and it didn't took me long at all i'm a newbie
I unroot my phone via magisk
install os 10.3.1 then flash twrp and root my phone again.
Dears,
Thanks for the replay.
I forgot that I was without TWRP.
What I did, and it worked, is:
- uninstall magisk manager by magisk
- install full update
- reboot
- flash by fastboot boot.img patched by magisk.
Thanks again

Categories

Resources