Related
This ROM can not be installed on Android 6.
The "way back" to EMUI 4 goes by official rollback.
[Custom ROM] [K-ROM V.2] Honor 6x (Berlin) BLN-L21C432B360 - EMUI 5 -Android 7
Based on Huawei firmware C432B360 and HRT_Kangvip B357.
My ROM has been developed and tested on this device:
Huawei Honor 6x - Premium - [BERLIN]
Model number: BLN-L21
EMUI 4 build number: NRD90M test-keys
EMUI 5 build number: BLN- L21C432B360
-OTA updated Free device, without branding, with root and TWRP Recovery 3.1.1
The following mods were integrated and activated:
- Autostart administration in the phone manager
- Call Recorder
- KangVip Advanced Settings
Should extensions or Xposed be added, will be updated immediately.
Whether the following instructions on Provider Branding is applicable,
I could not test and therefore advise against it.
The Rom was installed successfully on BLL-L21C185B361 (Middle East) from @--ahmed.
You need:
- PC or Windows tablet
- USB cable
- Windows 7 / 8.1 / 10
- Minimal Adb and Fastboot
- OEM unlocking active in the developer options
- Huawei HiSuite (installs all necessary drivers)
- USB debugging on. Back up your data using Huawei Backup.
The Rom is installed as if you wanted to restore a TWRP backup.
Before the ROM installation, please create a TWRP 3.1.1 backup for emergencies !!
Conditions for installation:
The firmware EMUI 5 / B360 (nougat) must be preinstalled. My ROM can not be installed on Android 6. Root is not necessary.
TWRP Recovery 3.1.1 (berlin311.img) is required.
OEM + FRP unlocked.
OEM Unlock and USB on in phonesettings.
TWRP installation is described here:
https://www.android-hilfe.de/thema/...test-keys-android-7-0-nougat-emui-5-0.834824/
The compressed file contained in the download package
2017-06.system.update.B360.k.rom.v.2.rar (1,008.1 MB) please unzip (do not download as zip). The backup file created in this way
2017-06.system.update.B360.k.rom.v.2 please copy to the ExtSd in the TWRP backup folder.
Installation:
Please do not make wipes. Do not delete the cache or dalvik cache. Also no other partition and also no Factoryreset to perform. Later, this is feasible.
In TWRP now my backup restore and reboot.
All partitions; lease do not part recovery.
Your applications, with data and settings, are retained.
If TWRP wants to root, please refuse the request.
Now the ROM installation is complete. An additional installation of SuperSu and BusyBox is not necessary. Both were integrated And configured. There are comprehensive reading and writing rights.
The ROM is partially debloated. Some Google Apps have been removed. They can be installed by you if necessary. You can do that, too Do well with the HiApp.
Please make regular backups. ...... and remember: A custom ROM is Never as perfect as a stock Rom. He has to teach him something.
Never update the app from SuperSu. If it does happen, immediately the app delete and install the SuperSu App from the download package.
Should you ever make a Factoryreset, updated before that Google Account.
Root, K-Settings and the OTA update capability will remain thereafter.
The Rom is to be used very well as a Rescue System. Because it has no data partition, it provides independently a new in the boot process , one if none exists.
Have fun ! I hope my bad English is clear enough. Sorry!
Download Package:
- 2017-06.system.update.B360.k.rom.v.2.rar
- berlin311.img - TWRP Recovery
- eu.chainfire.supersu.apk
- minimal_adb_fastboot_v1.4_setup.exe
Big thanks to: HRT_Kangvip,
@OldDroid, Chainfire, Stephen (Stericson) + Jmz Software, Team Win Recovery Project, and Huawei Technologies Co., Ltd 华为 技术 有限公司
German thread: https://www.android-hilfe.de/thema/...rlin-bln-l21c432b360-emui-5-android-7.835906/
NOTE: Despite careful elaboration, I can not guarantee that this manual will not cause damage to the device or operating system and therefore does not assume liability for any damage or malfunctions to the hardware and software! If you are still insecure, follow these steps: Do not run the instructions unless the conditions (model number, Android version, etc.) are applicable to you or your device. Read instructions carefully and completely, look up unknown terms. Check downloaded files for viruses. Make a backup of important settings and data. Do not follow the instructions if you do not know what you are doing.
Downloads:
Updates and development stopped. With Oreo we'll go on again! !
We need this ROM! Thank you!!
ChinHon said:
Hi, I have built a custom Rom for my 6x premium. It works with small errors. (Google sync) I will try it for a week. Must remove the small bugs. When the Rom is finished I will post it here. Of course, only if you want it.
It is for the most part stock. Some Googleware is frozen or removed. The known Kangvip settings are installed. As well as the Call Recorder and Viper. It is, like all my Roms for the Mate S, based on a TWRP backup file.
Click to expand...
Click to collapse
Waiting for links. :highfive:
Sent from my Honor 8 using XDA Labs
Screen shots
.......
.......
Gonna wait for links
ChinHon said:
This editor has never liked me. There is my german thread.
https://www.android-hilfe.de/thema/...21c432b360-emui-5-android-7-krom_b357.835254/
Click to expand...
Click to collapse
Any download links now man?
Sent from my Honor 8 using XDA Labs
,........
ChinHon said:
Does not appear before Sunday. The test is not finished yet. The newest Screenshots are there.
https://www.android-hilfe.de/thema/...i-5-android-7-krom_b357.835254/#post-10518141
Click to expand...
Click to collapse
We'll be waiting man.
Sent from my Honor 8 using XDA Labs
........
Very interesting. What toolchain are you using when you compile? I haven't been able to build my environment correctly yet using the OpenKirin source and gcc-linaro.
.......
ChinHon said:
I cannot publish it. EMUI 5 is encoded. I do not want which becomes unsafe the new system.
Click to expand...
Click to collapse
So it's discontinued?
what about BLN-L22
Ramesh006 said:
what about BLN-L22
Click to expand...
Click to collapse
It should work. If it ever gets published.
.......
.......
ChinHon said:
At the moment I am in New York. I am Sunday again back in Germany. Then I write the Tutorial and upload the Rom. It goes not without Tuto. I would absolutely like to prevent bricks.
Click to expand...
Click to collapse
So sunday is the day.
Sent from my Honor 8 using XDA Labs
.......
Is this rootable with magisk?
Gravedig
Should be, by patching ramdisk.img (for EMUI 8) but with Magisk 20.4 or older (not with the latest 22) - recently, there was a discussion in Magisk General thread about installing Magisk to another Huawei but also with EMUI 8
Found this online and decided to share. Credits go to ABD RAZAAQ at getdroidtips.com. The official site https://www.getdroidtips.com/asus-zenfone-max-plus-m1-android-9-0-pie/
Today Asus rolled Android Pie update for Asus ZenFone Max Plus M1. If you have an Asus ZenFone Max Plus M1 (ZB570TL) device, then you should be one lucky to enjoy the Android 9.0 Pie update officially from Asus. The update bumps the software version to WW-16.02.1905.435. Follow our guide to manually install Asus ZenFone Max Plus M1 Android 9.0 Pie Update. Yes, the company has uploaded the Android 9.0 Pie FOTA update package on its official website.
The update packs new features such as gesture navigation, better AI based battery management, App action, and App slices. In this post, we will guide you to install Asus ZenFone Max Plus M1 Android 9.0 Pie update manually. If you are awaiting the OTA and it is yet to show up, then you can download and install the ROM on your own. Below you can find the OTA link and a full tutorial on how to install it.
To receive the firmware OTA, you must be running last Oreo firmware on ZB570TL model. If you already have this update, then check for the update manually by going into Settings > Software update > Download update manually.
Changelog:
1. Android 9 (Pie) AOSP Beta version is now available for download. Please note that this version is “pure” Android system, and will not have ZenUI.
2. Please be aware that installing this system image on a device removes all personal data from the device, so please remember to back up your data first.
3. This is the Android 9 (Pie) AOSP Beta version, so the user experience will be different from Android 8 (Oreo). If you are used to and prefer using ZenUI, we recommend that you continue with the Android 8 (Oreo) version.
4. Android 9 (Pie) AOSP Beta version will not be supported with routine updates.
5. Update google security patch
Steps to Install Asus ZenFone Max Plus M1 Android 9.0 Pie Update Manually
Either you can use the upgrade by recovery method or the ADB sideload method. We will discuss both in brief and learn the process step-by-step.
Before proceeding you have to follow a few points and grab some tools you will need while you follow either of the flashing methods.
Pre-Requisites
Supported for Asus ZenFone Max Plus M1 ( ZB570TL)
Charge your device to 50% or more.
Your device must be running on Stock ROM (for method 1)
Download ASUS USB Drivers on your PC.
Before upgrading, take a complete backup of your data.
For the second method, you must download ADB and Fastboot tools on your PC [Download ADB SDK Tool]
Disclaimer: We are at GetDroidTips will not be responsible for any bricking/damage to your phone while/after installing this ROM.
Method 1: PC Version:
1. Download the File provided in the download below.
2. Copy the ZIP file in the internal storage of your Phone.
3. Connect your phone to PC via micro USB cable, and copy the ZIP file to the root directory of the phone of internal storage.
4. Remove the micro USB from the phone when the file transfer is completed.
5. If the Update notification doesn’t show up, reboot your phone and check for the firmware update notification pop-up on the status bar.
6. Tap and System Update File Detected, and follow the steps shown to update the firmware.
Method 1: Mobile Version:
1. Download the file from the provided link:
2. Open Downloads Folder or the Path where you have downloaded the File, by default the path is always download folder.
3. Move/Copy the File to Internal Storage of your Phone.
4. Once the File is in the internal storage the update notification should arrive or else restart your phone.
Note:
The Battery should be Minimum 30% charged before you update the device.
The Zip file needs to be downloaded in one attempt as the file may be corrupted if the download fails in between.
The current firmware version of your phone should be on the latest one, only then the New firmware version will be detected.
I hope this guide was useful to upgrade your ZenFone Max Plus M1 to Android 9.0 Pie.:laugh::good:
Link to rom
https://dlcdnets.asus.com/pub/ASUS/...17.1515538682.1566745255-664060730.1558380667
Update don't have navigation gestures, adaptive battery, digital wellbeing and some more Pie features. It's a Pie ROM, naturally, but it is incomplete.
Custom rom with oficial rom
Hello my dear friend, my bootloader is unlock and i try to use this aosp based version to try do a port to custom rom. And i'm working in a unlocker solution to X018D.
Delevoper said:
Custom rom with oficial rom
Hello my dear friend, my bootloader is unlock and i try to use this aosp based version to try do a port to custom rom. And i'm working in a unlocker solution to X018D.
Click to expand...
Click to collapse
vtn46 said:
Update don't have navigation gestures, adaptive battery, digital wellbeing and some more Pie features. It's a Pie ROM, naturally, but it is incomplete.
Click to expand...
Click to collapse
The navigation gesture appears when after i reset the phone. But only on the "SETUP PART" after of setup it backs on Navigation bar
I am using this rom only because you can merge sd as internal storage. for the rest, call it a beta is a compliment... nothing works, bluetooth disconnects every 5 minutes and no longer reconnects, I tried to disable battery optimization from the apps (tried hundreds of playstore app regardin bluetooth...), but nothing, a smartwatch is unusable. each application is automatically closed after it is in the background for a while. whatsapp notifications 1 in 10... this rom is a pain in the a**e. this is the first and last asus I buy, support does not exist at all
This is the link to android 12 or android S for pixel phones including pixel 4a
Get Android 12 | Android Developers
Get an Android 12 on your eligible device.
developer.android.com
Just download the correct zip file , extract (in adb platform tools folder),click on flash-all.bat after putting phone into bootloader and plugging into computer
Root is possible using canary build but after reboot it reverts and gives issues trying to re root using the app - if anyone knows more about getting root to fully work please let us know
I never had an issue with rooting the 12 preview on my Google Pixel 4a. But the Safety Net failing was my issue. But I could still use my banking apps, etc. So I have no idea why it would let me use my banking apps if the Safety Net through Magisk failed? But rooting was no issue for me. I used the Canery version of Magisk to patch the boot image to achieve root. Hope that helps? I love the Android 12 preview! I just hope we can achieve getting the Safety Net to pass on it in the future.
Was that with the 1st preview or second ,I have been trying second preview build,was able to root 1st but wouldn't stick after reset and downgrade to v21,which is best magisk build for pixel 4a on Android 11 ,and what version of canary , so far I am getting boot loop on second preview latest canary, and to by pass safety net with magisk , you need to find safety net fixv1.1.0.zip module for magisk , an latest hide magisk props, set its fingerprint to google and choose pixel 4a 5g and your good to go using terminal "su -c props works flawless on Android 11 ,the dev previews are based off android 11 so far I've seen ,and have you attempt ed viper magisk mod,there is only one version that works on pixel 4a android 11 that worked it's an older version newer doesn't activate the drivers , but not on Android 12 ,that's all I really use magisk for and root ,I would post files but I think it's against the rules to use or distribute those kind of files ,if you need them I can send them other ways, also which boot slot is your boot.img flashing to in bootloader ,boot_a or boot_b
Madaevena22 said:
I never had an issue with rooting the 12 preview on my Google Pixel 4a. But the Safety Net failing was my issue. But I could still use my banking apps, etc. So I have no idea why it would let me use my banking apps if the Safety Net through Magisk failed? But rooting was no issue for me. I used the Canery version of Magisk to patch the boot image to achieve root. Hope that helps? I love the Android 12 preview! I just hope we can achieve getting the Safety Net to pass on it in the future.
Click to expand...
Click to collapse
Was that with the 1st preview or second ,I have been trying second preview build,was able to root 1st but wouldn't stick after reset and downgrade to v21,which is best magisk build for pixel 4a on Android 11 ,and what version of canary , so far I am getting boot loop on second preview latest canary, and to by pass safety net with magisk , you need to find safety net fixv1.1.0.zip module for magisk , an latest hide magisk props, set its fingerprint to google and choose pixel 4a 5g and your good to go using terminal "su -c props works flawless on Android 11 ,the dev previews are based off android 11 so far I've seen ,and have you attempt ed viper magisk mod,there is only one version that works on pixel 4a android 11 that worked it's an older version newer doesn't activate the drivers , but not on Android 12 ,that's all I really use magisk for and root ,I would post files but I think it's against the rules to use or distribute those kind of files ,if you need them I can send them other ways, also which boot slot is your boot.img flashing to in bootloader ,boot_a or boot_b
OK, So If any One Interested in Installing Stable ColorOS 12 C.36 on Global Units here I have a small guide for Installation.
Steps to Install ColorOS 12 C.36 Stable Android 12 on Oneplus 9 & 9 pro :
Make Sure you are running OxygenOS 12 open beta 1/2 : Download OxygenOS 12 open beta 1
Download Local update application : Download
Install Local update apk on OxygenOS 12 open beta 1/2.
Download ColorOS 12 C.36 : ColorOS C.36 12 Stable, Note: Official Servers are Slow, Join our Telegram group we can provide mirrors/fast downloads.
Place ColorOS 12 C.36 zip file internal storage, Make sure you don’t place file in any folder.
Open Local update app which was installed in that tap on gear Icon on right top corner – Select local update & Select file.
Once done reboot & Enjoy ColorOS 12 Stable update.
Note: You can’t Install OxygenOS 12 open beta if you are running latest version of OxygenOS 11.2.10.10, you need to Downgrade to OxygenOS 11.2.8.8 or OxygenOS 11.2.9.9.
If you guys want to check out video of ColorOS12 running on Global Oneplus 9 : Here we have video
Credit : My self techibee
ashokmor007 said:
OK, So If any One Interested in Installing Stable ColorOS 12 C.36 on Global Units here I have a small guide for Installation.
Steps to Install ColorOS 12 C.36 Stable Android 12 on Oneplus 9 & 9 pro :
Make Sure you are running OxygenOS 12 open beta 1/2 : Download OxygenOS 12 open beta 1
Download Local update application : Download
Install Local update apk on OxygenOS 12 open beta 1/2.
Download ColorOS 12 C.36 : ColorOS C.36 12 Stable, Note: Official Servers are Slow, Join our Telegram group we can provide mirrors/fast downloads.
Place ColorOS 12 C.36 zip file internal storage, Make sure you don’t place file in any folder.
Open Local update app which was installed in that tap on gear Icon on right top corner – Select local update & Select file.
Once done reboot & Enjoy ColorOS 12 Stable update.
Note: You can’t Install OxygenOS 12 open beta if you are running latest version of OxygenOS 11.2.10.10, you need to Downgrade to OxygenOS 11.2.8.8 or OxygenOS 11.2.9.9.
If you guys want to check out video of ColorOS12 running on Global Oneplus 9 : Here we have video
Credit : My self techibee
Click to expand...
Click to collapse
how to get to open beta on the le2113. The open beta is only for le2115 and i cannot see the package in the system updates
How can i hacke wifi in one plus 9 without root