Database Info

Problem booting TWRP recovery (Crash Dump Mode)

I has a pretty big problem of that Crash Dump screen some hours ago and i still can't get to fix it. Here is the story, after trying Havoc 2.0 rom i decided to go back to stock so in TWRP i erased the system, cache (dalvik cache and cache), data and internal storage (i wiped internal storage because TWRP just couldn't decrypt it even though the passwd was correct), after that i flashed the stock OOS rom and the TWRP installer (all these being booted on twrp), but when i rebooted into recovery the twrp splash screen just froze there, so i tried to boot twrp through fastboot, but then the crash dump screen apeared, this post: https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892 said this was a way to recover from that problem so i tried it, it worked as far as booting into OOS is concerned, but when i try to boot into twrp through fastboot the crash dump screen keeps showing up.
Any ideas?

mateuxi said:
I has a pretty big problem of that Crash Dump screen some hours ago and i still can't get to fix it. Here is the story, after trying Havoc 2.0 rom i decided to go back to stock so in TWRP i erased the system, cache (dalvik cache and cache), data and internal storage (i wiped internal storage because TWRP just couldn't decrypt it even though the passwd was correct), after that i flashed the stock OOS rom and the TWRP installer (all these being booted on twrp), but when i rebooted into recovery the twrp splash screen just froze there, so i tried to boot twrp through fastboot, but then the crash dump screen apeared, this post: https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892 said this was a way to recover from that problem so i tried it, it worked as far as booting into OOS is concerned, but when i try to boot into twrp through fastboot the crash dump screen keeps showing up.
Any ideas?
Click to expand...
Click to collapse
Use bluespark twrp not official

ON rom 8.1 best is official twrp
on rom 9.0 best is blues park twrp

yldlj said:
Use bluespark twrp not official
Click to expand...
Click to collapse
akswap said:
ON rom 8.1 best is official twrp
on rom 9.0 best is blues park twrp
Click to expand...
Click to collapse
It worked!
Now i'm installing all my mods again.
Thanks!
UPDATE:
Nevermind, it boots into twrp, but it wont boot OOS, i already tried erasing all the partitions (system, data and cache) and installing OOS and bluspark TWRP.
It turns on, shows the bootloader unlocked screen and then it reboots back to twrp.
UPDATE 2:
Fixed it by erasing all data on oneplus recovery, thanks again, my phone is back from the death (a quite unrooted one).

Fixed it by erasing all data on oneplus recovery, thanks again, my phone is back from the death (a quite unrooted one).
Click to expand...
Click to collapse
When u upgrade from os 8.1 to 9 .0 after flash install blues spark twrp.
When Downgrade 9.0 to 8.1 use official OnePlus6Oxygen_22_OTA_007_all_1805131952_O_MR1.zip
& flash official Twrp & Stable magisk only
for 8.1
1- must have a copy of Oxigen Fastboot ROM 8.1
2- Oxigen 8.1 rom ( Revovery) .zip
3- twrp-installer-enchilada-3.2.3-0zip & img file
for 9.0
4- twrp-3.2.3-x_blu_spark_v9.86_op6.zip & img file
5- magisk 16.7 beta & 17.1 Stable
6- official 9.0 Stable rom
7- tool all in One (PC)
Enjoy flashing

Update oxygenOS with root from twrp

Hi All, I've a oneplus 7 with twrp and root and I'm facing an issue during the update of oxygen os done by twrp. Basically, after any update the phone doesn't boot and goes in bootloop to recovery (stock if I didn't installed twrp after the update or twrp if I did it). In order to correctly boot the device I had any time to format and wipe all the data.
I never had this kind of issue with previous oneplus in same configuration (5t and 6t). Is there any way to update oxygen os from twrp without having to wipe all the data any time?

You should have a look at the TWRP thread.
OP by Mauronofrio says:
"If you want you can also update a stock rom from phone settings with local upgrade:
- Update the Rom WITHOUT REBOOT;
- Open Magisk Manager;
- Menu/modules/+ button/select the twrp installer.zip and flash it;
- Always in Magisk Manager, click on Install/Install/Direct Install;
- Again in Magisk Manager, click on Install/Install/Inactive Slot;
- Reboot."
Thats the way I do it, also in the past with my old OP6.

Trouble booting after LineageOS update

Today I downloaded the latest nightly (lineage-16.0-20200123-nightly-I01WD-signed) and did a backup of System, Data, and Boot before flashing it. After rebooting, the LineageOS boot animation loops continually. It also overwrote TWRP with the LineageOS recovery (which I didn't realize was automatically part of the zip. I'm still not accustomed to A/B slot devices without recovery partitions). I can still fastboot into a good version of TWRP that correctly prompts me for my PIN for decryption, so I tried restoring from my backup. The restore seems to finish without problems, but upon rebooting the LineageOS boot animation still doesn't finish. My data/media is still intact and backed up separately, so I can start from scratch if absolutely necessary, but I was hoping there's some easy steps I can try before resorting to that. Let me know if I need to include more information.
EDIT:
I think I got it taken care of, although I don't know exactly why it worked. Here's what I did:
1. Flash the new LOS image I downloaded using fastboot TWRP
2. Boot to newly installed LineageOS recovery mode
3. Flash the same LOS image again from LineageOS recovery
4. Fastboot TWRP again without trying to start system yet
5. Re-flash the old version of OpenGapps I've been using (from Nov 2019 or something)
6. Reboot system

I messed up - stock ROM update via TWRP :(

Hi all,
update: I made update at the end.
My OP7 version is GM1900, so far I was on build 10.0.6GM57BA with Magisk 20.4, but for some time I had 10.0.8 update notification.
Today I decided to update build.
I consider myself as medium experienced user the type that is using rather step by step guides.
But this time I thought I don't need guide cause I should remember how I did update last time. In the meantime I help my son to make homework what was an additional distraction.
I always download full OTA from oneplus.com support but it turned out there was no 10.0.8 (instead there was/is 10.0.7). So I tried to search for 10.0.8 and I found this xda news. As there is a mess with versions and links and I was doing it on mobile Chrome I accidentally tapped Global/India Full OTA
Steps I made:
1.1. Downloading file OnePlus7Oxygen_14.P.29_OTA_029_all_2009152124_ba2424a.zip
1.2. Downloading official TWRP twrp-installer-3.4.0-0-guacamole.zip
1.3. Boot into TWRP.
1.4. Flash twrp-installer-3.4.0-0-guacamole.zip
1.5. Restart to TWRP
1.6. Flash magisk uninstall
1.7. Flash 10.3.5 (India & Global) - OnePlus7Oxygen_14.P.29_OTA_029_all_2009152124_ba2424a.zip
1.8. Flash magisk 20.1 (but forgot to reboot after flashing TWRP it was first mistake I think)
1.9. Ended with 10.3.5 (India & Global) build with stock recovery and without Magisk.
Next I tried to return to GM57BA.
Then the steps I made:
2.1. Downloading official build 10.0.7.GM57BA from oneplus support site.
2.2. Downloading Mauronofrio's TWRP twrp-3.4.0-0-guacamole-unified-Q-mauronofrio.img and twrp-3.4.0-0-guacamole-unified-installer-mauronofrio.zip
2.3. Boot OP7 into fastboot then command "fastboot boot twrp-3.4.0-0-guacamole-unified-Q-mauronofrio.img"
2.4. After phone booted into TWRP I flashed twrp-3.4.0-0-guacamole-unified-installer-mauronofrio.zip
2.5. Restart to TWRP
2.6. Flashed magisk uninstall.
2.7. Flashed 10.0.7.GM57BA
2.8. Flashed magisk 20.4
2.9. Only then I rebooted to TWRP (I think it was mistake).
2.10. Then I saw first problem - there was no lockscreen security with TWRP (unlock pattern).
2.11. Restarted to TWRP again - the same no unlock pattern screen, no access to data partition
2.12. I started to panic and restarted into system.
2.13. I ended with hard bootloop - I mean I can't even do force reset (force reboot) by pressing and holding the Power and Volume down buttons at the same time :crying:
I'm sorry for this long description but I thought it will be helpful to diagnose what I messed up.
Questions and my thoughts:
1. Did I messed up by not restarting after last magisk flash?
2. What to do now? Do I need to wait for battery discharge? Then unbrick using MSM tool?
3. Is there any chance to repair and preserve personal data? I have TWRP backup about 3 months old. Maybe after battery discharge I should go to TWRP and then sideload this backup? Maybe magisk uninstall or stock boot image flash?
Please help
Update:
After battery discharge I managed to boot into TWRP recovery (Mauronofrio's 3.4.0.0)
Then couldn't access /data
But when I switched to Slot B and reboot to recovery situation is back to normal (I guess).
I'm still in recovery scared to boot into system.
What to do now?

kold11 said:
Hi all,
update: I made update at the end.
My OP7 version is GM1900, so far I was on build 10.0.6GM57BA with Magisk 20.4, but for some time I had 10.0.8 update notification.
Today I decided to update build.
I consider myself as medium experienced user the type that is using rather step by step guides.
But this time I thought I don't need guide cause I should remember how I did update last time. In the meantime I help my son to make homework what was an additional distraction.
I always download full OTA from oneplus.com support but it turned out there was no 10.0.8 (instead there was/is 10.0.7). So I tried to search for 10.0.8 and I found this xda news. As there is a mess with versions and links and I was doing it on mobile Chrome I accidentally tapped Global/India Full OTA
Steps I made:
1.1. Downloading file OnePlus7Oxygen_14.P.29_OTA_029_all_2009152124_ba2424a.zip
1.2. Downloading official TWRP twrp-installer-3.4.0-0-guacamole.zip
1.3. Boot into TWRP.
1.4. Flash twrp-installer-3.4.0-0-guacamole.zip
1.5. Restart to TWRP
1.6. Flash magisk uninstall
1.7. Flash 10.3.5 (India & Global) - OnePlus7Oxygen_14.P.29_OTA_029_all_2009152124_ba2424a.zip
1.8. Flash magisk 20.1 (but forgot to reboot after flashing TWRP it was first mistake I think)
1.9. Ended with 10.3.5 (India & Global) build with stock recovery and without Magisk.
Next I tried to return to GM57BA.
Then the steps I made:
2.1. Downloading official build 10.0.7.GM57BA from oneplus support site.
2.2. Downloading Mauronofrio's TWRP twrp-3.4.0-0-guacamole-unified-Q-mauronofrio.img and twrp-3.4.0-0-guacamole-unified-installer-mauronofrio.zip
2.3. Boot OP7 into fastboot then command "fastboot boot twrp-3.4.0-0-guacamole-unified-Q-mauronofrio.img"
2.4. After phone booted into TWRP I flashed twrp-3.4.0-0-guacamole-unified-installer-mauronofrio.zip
2.5. Restart to TWRP
2.6. Flashed magisk uninstall.
2.7. Flashed 10.0.7.GM57BA
2.8. Flashed magisk 20.4
2.9. Only then I rebooted to TWRP (I think it was mistake).
2.10. Then I saw first problem - there was no lockscreen security with TWRP (unlock pattern).
2.11. Restarted to TWRP again - the same no unlock pattern screen, no access to data partition
2.12. I started to panic and restarted into system.
2.13. I ended with hard bootloop - I mean I can't even do force reset (force reboot) by pressing and holding the Power and Volume down buttons at the same time :crying:
I'm sorry for this long description but I thought it will be helpful to diagnose what I messed up.
Questions and my thoughts:
1. Did I messed up by not restarting after last magisk flash?
2. What to do now? Do I need to wait for battery discharge? Then unbrick using MSM tool?
3. Is there any chance to repair and preserve personal data? I have TWRP backup about 3 months old. Maybe after battery discharge I should go to TWRP and then sideload this backup? Maybe magisk uninstall or stock boot image flash?
Please help
Update:
After battery discharge I managed to boot into TWRP recovery (Mauronofrio's 3.4.0.0)
Then couldn't access /data
But when I switched to Slot B and reboot to recovery situation is back to normal (I guess).
I'm still in recovery scared to boot into system.
What to do now?
Click to expand...
Click to collapse
To force restart I need to use power button and both volume keys..
To keep TWRP you need to flash rom, then without restart flash TWRP again, then restart TWRP, then flash Magisk.
Likely the r reason why your system doesn't boot is because it can't decrypt your data.
Why this happens I don't know, maybe in the upgrade they changed something related to the exception and then by downgrading again it isn't able to read it anymore.
I would suggest to:
Flash the latest rom.
Flash TWRP
Reboot TWRP
If TWRP then doesn't ask for PIN or password, then I'm afraid you have lost your data. I hope you have a backup.
I'm that case format (not just clear) data -> yes
Reboot TWRP
Then flash Magisk.

Thanks for reply.
Like I wrote in update after changing slot to b I managed to run TWRP with decrypted data, made even new new backup.
I also restarted into system and it occurs I'm still 10.3.5 (India & Global) GM57AA, so everything I flashed in with build 10.0.7.GM57BA was unsuccessful.
I think I messed with changing inactive slot procedure. Noob mistake I need to read about it.

kold11 said:
Thanks for reply.
Like I wrote in update after changing slot to b I managed to run TWRP with decrypted data, made even new new backup.
I also restarted into system and it occurs I'm still 10.3.5 (India & Global) GM57AA, so everything I flashed in with build 10.0.7.GM57BA was unsuccessful.
I think I messed with changing inactive slot procedure. Noob mistake I need to read about it.
Click to expand...
Click to collapse
I would suggest do restore your device with msm unbrick tool.
1. From recovery, turn off (i noticed, that when tried to turn off from somewhere else, the device would auto reboot later in downlaod mode)
2. In windows, turn off the connection & open device manager: Get this driver http://download.windowsupdate.com/c..._fba473728483260906ba044af3c063e309e6259d.cab
3. Press volume/down + volume/up, after about 5s connect to pc
4. Your device should show up in device manager, open it and install the driver manuell from step 2 (keep device options open... if fail you need to uninstall the driver before trying again)
5. Now wait for about 40s, if your device stays in download mode, you can open & start the msm tool (leave the options in msm as they are)
6. It will take about 280s, then the device will reboot.... (its normal that it stays longer at the oneplus logo at first start)
MSM Thread: https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
I've also uploaded the 10.0.5OOS Unbrick tool on mega, because android file hosted downloads are so terrible: https://mega.nz/file/ArZFkYpS#Z_rOIwZeYN27IG6L8rOi-yfw8wXGiwvK-uWVDlsmvTI

TWRP can't decrypt + Fastboot loop

Unsure if this is the place since its also related to TWRP 3.7, any help is appreicated
Got stuck in a weird situation and wondering if anyone has ideas.
Current State:
Slot_A on OOS 11, can boot TWRP via Fastboot
Slot_B on OOS 12, can only boot into Fastboot
Originally on OOS 11, booted TWRP and made backups of all partitions (data, boot, system image, vendor image, etc.). Forgot to move this to computer so this is all still stored on device.
Proceeded with OOS 12 upgrade (into Slot B). Patched magisk, rebooted, then flashed TWRP 3.7 (FBEv1), direct installed magisk, rebooted. - Everything was functional, but decided to go back to OOS 11.
Thinking I could just use the TWRP backup made on OOS 11, I did the following:
Booted into 3.7 TWRP
Restored the backup for boot, system image, and vendor image
Set active slot to Slot A and reboot
It doesn't allow me to boot into the OS (Presumably because the data was re-encrypted for OOS 12?)
Set active-slot=b and reboot, but it's locked to fastboot.
I've attempted a few things, but I can't boot back into OOS. I would prefer to retrieve my TWRP backups first before doing an MSM reset.
When on Slot_A (older), I can only boot into TWRP 3.6.2 and 3.7. I'm guessing 3.6.2 can't decrypt since it's only configured for A11 and under, but not sure why 3.7 can't decrypt my data.
- It doesn't even ask for pin when TWRP launches; maybe it's reading the System for Slot_A and thinks i'm still on A11?
- running `twrp decrypt {pin}` doesn't seem to work. Unsure if there's something done to my lockscreen pin to be used as the encryption key/password?
When on Slot_A, attempting to boot into either the system or TWRP hangs.
Things I've tried:
Flashing A11 boot.img and magisk-patched boot.img to Slot_A -> Hangs on 1+ Spinning dots
Flashing A12 boot.img and magisk-patched boot.img to Slot_B -> Hangs on 1+ logo (Does show up on ADB though)
Booting Slot_B into TWRP 3.6.2 (Official, and Nebrassy unofficial for A12) and TWRP 3.7 -> Gets stuck on "Fastboot Mode" screen (fastboot cli still responds) or Hangs on snapdragon logo
Edit: Ended up using MSM. Needed device for work

I have a similiar problem to flash twrp to my phone ,
each time i try i get a fastboot loop too and i have to reset/unbrick it with the msm tool back to android 11
i use the OnePlus_7_Pro_Global_OxygenOS_11.0.5.1 package to unbrick the phone , i dont know how long and often i tried now to get twrp to work so that i can flash a custom fw ... i want root and a android 13 based cfw but i dont get it to work :/

I got it working with crdroid. heres some stuff
guacamole - Google Drive
drive.google.com
be carefull
¯\_(ツ)_/¯​
------------------------------------
I got stable and decrypted fs RW working on crdroid 9.1 firmware other than some weird bugs
i put it in the 2023-twrp

MissAnthropin said:
I have a similiar problem to flash twrp to my phone ,
each time i try i get a fastboot loop too and i have to reset/unbrick it with the msm tool back to android 11
i use the OnePlus_7_Pro_Global_OxygenOS_11.0.5.1 package to unbrick the phone , i dont know how long and often i tried now to get twrp to work so that i can flash a custom fw ... i want root and a android 13 based cfw but i dont get it to work :/
Click to expand...
Click to collapse
I have the exact same problem! Have you found a fix yet? This seems to happen when I try to install Android 13 based roms, and when I install a rom like Lineage OS, using their recovery, it works just fine.

No, and I don't know why, maybe i do something wrong or it is the Modell that make this trouble.
I thinking to sell my OP7PRO and buy another one ( and then I have the same problem with the new phone )
No no let the jokes aside, it must work, i mailed with OnePlus Support Germany but they only helped me to install A11 w/root and recovery, i thought ok now I can update to A13 so I loaded A13, unpacked the boot.img, Patched the boot.img
Installed A13 w/out errors, rebooted - Fastboot loop

RIP
Started ranting instead

TWRP for guacamole development seems to be fairly scarce, last working recovery I tried was when they started using fastboot boot to enter it. It was pretty hacky even then, currently it seems that nebrassy is the maintainer for twrp for guacamole.
Github: https://github.com/nebrassy Android 12 thread: https://forum.xda-developers.com/t/recovery-12-official-teamwin-recovery-project.4269551/ Nebrassys Telegram has helpful info as well: https://t.me/NSSFB
last update I found was 2022:10:2 - https://www.pling.com/s/Phones/p/1835156
after a few days of torture I read a thread on here saying if you flashed twrp via magisk like you would if it was a magisk moule it would work normally. It worked on my device so I assume that its universal. I have filled my computer with guacamole related files Im uploading here before im forced to reinstall my os:
guacamole - Google Drive
drive.google.com
Just a fyi from what I have gathered from my experience you can get a stable twrp recovery with persistant / read write access and disabled encryption and basically use it with little error up until you try flashing a newer custom rom. My guess is when flashing a cfw the bootloader gets rewritten causing our boot image to become corrupted. Flashing twrp over / booting to twrp via fastboot or trying to install it via another custom recovery causes boot / recovery failures... meaning you cant really use it for flashing custom roms. I cant find the post with the install instructions I seen that helped me so here is what I think it was,
Found it: https://forum.xda-developers.com/t/how-to-make-twrp-work-in-your-stock-a12.4522667/#post-87985325
~ I have bricked this device constantly while ****ing around so unless youre prepared to go to war with the ****er, Id quit messing with it.
MSM flashing with windows is the only way to recover from the void.
Click to expand...
Click to collapse
using Linux systems for EDL is a bit more difficult to figure out but can be done > EDL https://github.com/bkerler/edl/blob/master/edl | https://github.com/andersson/qdl
Click to expand...
Click to collapse
~If you do brick I created a fastboot flashable A13 Oxygen os recovery rom and uploaded it to my google drive found under recovery_brick_fastboot.zip ~
Click to expand...
Click to collapse
lastly be mindful of a/b partition configuration or youll find yourself lost or bricked
Installation:
1. Obviously unlock the bootloader - OEM Unlock
2. Flash custom recovery (lineage/crdroid/etc)
3. (Personally I root here and again on the active slot so) flash magisk.zip
4. Reboot into installed ROM and install magisk android app and complete setup, reboot system
5. (another thing I like to do before flashing twrp) setup magisk enable all the basic options like prophide, deny list then set root userspace option to global.
6. Flash TWRP .zip (https://dl.twrp.me/guacamolev2/twrp-installer-3.7.0_12-0-guacamolev2.zip) via magisk
Alright! After all that you should be able to reboot into recovery via adb reboot recovery / fastboot or power menu and you find a working twrp recovery installed.
If you need help or want to **** around with the device you can @ me anytime and ill do my best to halp
2600 IRC (cornelius.scuttled.net >Nick captain >channel #guac)
Telegram https://t.me/+pxvpKToFo6pkMGYx
Discord https://discord.gg/MhvWgEfY

Pics

RolandStoner said:
Pics
Click to expand...
Click to collapse
You Confussing me a lot with your Posts before ...
i´m unsure what you mean exactly,
my bootloader is unlocked, with magisk i got a working root but after that i fail
what you mean with flash twrp with magisk ?
after unlocking the bootloader and get root, i tryd to flash twrp like before on other devices but that seems not working because i get then the fastboot loop
on another thread i found here on xda too, the guy wrote dont forget to activate the fastboot loop fix in the advanced options
but i not tried it yet again , so what should i do now ?
for now , i´m back on android11 , with stock oxygen os firmware
i have to do now the things like i did before again , unpack boot.img from the firmware that is installed on the device
patch it with magisk, flash it with "fastboot flash boot boot-patched.img" or is this step senseless ?
i mean you only wrote unlock bootloader and flash a cfw , but i don´t have a chance to flash a custom fw without a custom recovery ??
my recovery on my op7pro have no options for "install zip" or something else
addendum:
like i said you confused me a lot
addendum two:
or i do what i said before .. i sell my op7pro and buy me a one where i havent so much trouble installing twrp and root
i never had a phone before that made so much trouble in installing simple twrp ...
but i don´t found a phone yet that is compatible with kali and the pentest tools or wardriving tools like the oneplus , so i have a problem ,... i think i should drink now my selfmade blackberry liquor ( or blackberry booze ? ) and let the smartphone be a smartphone for now and power off my brain for a while

Yes, you need to patch your boot image via magisk and flash it with fastboot.
After you let magisk do its first time setup and then once it reboots you go to Magisk > Modules and flash the twrp recovery .zip file you got from twrp. link:https://twrp.me/oneplus/oneplus7pro.html just like you would if it was a magisk module.

the password for twrp decryption is your pin. Here are simpler instructions
https://forum.xda-developers.com/t/how-to-make-twrp-work-in-your-stock-a12.4522667/#post-87985325

****... I forgot a step.
after flashing twrp as a module in magisk you dont reboot, you go back to the main screen hit the install button and choose direct install

Now I understand it more, i had before rooted the phone successful with magisk, but then I made a wrong decision and booted into Fastboot and flashed TWRP in Fastboot Mode as I did it before with all my Smarties i had before, coz those way with Fastboot worked before all the time so I never thought that this is the error in the procedure
I give the twrp flashing with magisk a try.
Thx for the help

MissAnthropin said:
Now I understand it more, i had before rooted the phone successful with magisk, but then I made a wrong decision and booted into Fastboot and flashed TWRP in Fastboot Mode as I did it before with all my Smarties i had before, coz those way with Fastboot worked before all the time so I never thought that this is the error in the procedure
I give the twrp flashing with magisk a try.
Thx for the help
Click to expand...
Click to collapse
Thank @yassine2217 because I would never have done so either.... Still many bugs but twrp is twrp