Related
This guide is ancient, guys. The only purpose it should serve now is showing you how to set up ADB or flash something through recovery. You can use unrEVOked Forever to root now, which is much faster and easier. Quit sending me PMs with questions about this.
After the positive response I got from my Swype guide, I decided to do one for root too. I have found that Toast's guide goes way over the head of a lot of new users (Using adb to copy and rename files? C'm on, Toast!), and I want to simplify things down for them.
In this guide, I will provide a way for you to backup your phone in case you have any vital programs, and I will take you all the way through getting back to the rooted stock image and restoring your apps (from there, you will be on your own!). This DOES work with Sprint's latest OTA (ends in .6).
Please let me know if there are any errors or any omissions (something like Titanium Backup not working with unrEVOked; I haven't tested this). Also, if someone wants to take some screenshots of the recovery stuff or just has images of the steps, just let me know, and I can add them.
If you get stuck on a step, please post it in the topic first instead of directly PMing me. It's not that I don't want to personally help you (you can ask all the people I've helped), but I'm not always directly available, and other users can freely help you out if you post in the thread! It also provides a little "mini-troubleshooting" scenario for anyone else with the same issue as you. I also recommend reading the entire guide before doing it so you will have some idea of what steps you will be taking! Thanks!
TABLE OF CONTENTS:
SECTION I: BACKING UP YOUR APPS
SECTION II: ROOTING FOR THE FIRST TIME
SECTION III: INSTALLING A CUSTOM RECOVERY
SECTION IV: INSTALLING A CUSTOM ROM
SECTION V: NESSECARY SOFTWARE INSTALLATION
SECTION VI: INTRODUCTION TO ADB
SECTION VII: UNLOCKING NAND
1. First things first, if you don't want to backup your apps, skip to step #14.
SECTION I: BACKING UP YOUR APPS
2. Go to the settings menu, and select Applications.
3. Check the box next to "Unknown Applications" and accept the warning.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Go to your web browser and navigate to http://unrevoked.com/m/ .
5. Click the logo to download the file, as it says.
6. Once the file is done downloading, click it.
7. Click the install button, and hit "open" when it is done installing.
8. Click Start!
9. When you get the "Done." message, navigate to the Market and find Titanium Backup. I HIGHLY recommend the donate version, but you need to donate to the dev via PayPal to get a license file, and it could take him up to a day to email it to you.
10. Click "open" after it is done installing and click the "Problems?" tab at the bottom.
11. Click "yes" to install BusyBox.
12. When Titanium Backup restarts, press Menu and select "Batch."
13. Backup all of your apps here.
SECTION II: ROOTING FOR THE FIRST TIME
14. Plug in your phone's USB cable and connect it to your computer. You should get a prompt in the notification bar that the phone is connected. Open the notification bar and select where it says "charge only."
15. Change the type to "disk drive" and select "Done."
16. Download this file, and save it to your desktop.
17. Since your phone is connected as a disk drive, navigate to My Computer and you will see it as "Removable Disk." Drag and drop the file you just downloaded to the icon.
18. At this point, we are about to flash the debug image. YOUR DATA WILL ALL BE WIPED AFTER THIS POINT!
19. Hold down "power" to bring up the following menu. Select "Power off."
20. Select "Ok."
21. Thanks to mrono, we now have some images of the recovery image for your ease of use, but I will post toast's exact words that you should follow to the letter. If you want step-by-step versions of this, skip to step 21a.
- Hold volume down while powering the phone on. continue to hold volume down until you see the WHITE bootloader screen.
- After a few seconds it will begin to checking for files, and find PC36IMG.zip. while its doing this it will show a blue progress bar while its checking. (this takes 30 - 60 seconds to finish)
- It will then list all the images in the zip and ask you if want to flash. SAY YES
- When its finished it will ask you if you would like to reboot. AGAIN... SAY YES
- At this point it will boot into a rooted rom.
Click to expand...
Click to collapse
Essentially, you just have to hold the volume down button as you press the power button, and the phone will do the rest. Just accept any prompts you get.
21a. When powering on, hold down the volume down key, and keep holding it down until this screen appears.
21b. It will search for a second then prompt you to install the PC36IMG.zip. Select yes.
21c. After the installation is complete, select yes to reboot your device.
22. You are now rooted! Congratulations! However, this debug ROM will not show protected apps in the Market, so we're going to install a rooted version of the stock ROM now.
23. After everything is booted, reconnect your USB cable and enter disk drive mode as described before.
24. Navigate to the PC36IMG.zip file and rename it however you want. This prevents it from running when ever you reboot. After this file is renamed, disable "disk mode" the same way you enabled it.
SECTION III: INSTALLING A CUSTOM RECOVERY
NOTE: Steps 25 - 28 were removed due to ROM Manager being updated. Follow the steps in step 29 below.
29. If ROM Manager just won't work for you, download this file, rename it to "update.zip," and copy it to the root of your SD card just like we did with the PC36IMG zip before. A common problem that people have here is actually typing the last ".zip" in when naming the file. ONLY type "update" as the file name because the file you are downloading is already in .zip format, and Windows hides known file extensions. If you get any kind of "file cannot be found" or "verification error" on this step, then you probably made this mistake, and you just need to rename the file.
Please note: This is the ONLY file on your SD card to be named "update.zip." Do NOT rename any other files to "update.zip" or remove this file.
SECTION IV: INSTALLING A CUSTOM ROM
30. At this time, we will download the rooted stock ROM. Get it here and save it to your desktop. Do NOT rename this downloaded ROM to "update.zip!"
31. Copy it to your SD card exactly like we did before with the first ROM. Make sure you re-enable disk mode so you can copy files again.
32. Once again, thanks to mrono we have photos of this step, but I will give you the exact words from Koush on how to boot into recovery. Skip to step 32a for exact step-by-step instructions in this step.
When you want to launch the recovery image
* Turn on your device with 'volume down' pressed and select 'Recovery'
* When the exclamation mark appears, press and hold 'volume up' then press 'power'
* Select the second option, 'Apply sdcard:update.zip
* That's it, ClockworkMod recovery should launch!
Click to expand...
Click to collapse
Just like before, we turn off the phone and hold the volume down key as we power on the device. However, this time we will select "Recovery" from the menu (move down with the volume button and select it with the power button). Now you will see a screen with an exclamation mark. Press and hold the volume up button and press the power button. Select the "apply update.zip" option, and you will be in recovery mode.
32a. Just as before, hold down the volume down key as you power on the phone until this screen appears. Select "Recovery" from the menu.
32b. When you enter recovery, you will see the following screen. Don't panic.
32c. Hold the volume up button and press the power button. You will now be presented with the following screen.
32d. From here, select "apply sdcard:update.zip." Remember, this is the recovery image from before. Your phone will boot into the ClockworkMod custom recovery.
33. First, wipe the cache partition and the user data by selecting their respective menu options. From here, select "install zip from sdcard." Now select "choose zip from sdcard" and navigate to the stock ROM .zip file that we downloaded. Skip to step 33a for step-by-step images, but the text below may help you navigate the recovery menu:
The full recovery menu will read as follows:
-reboot system now
-apply sdcard: update.zip
-wipe data/factory reset
-wipe cache partition
-install zip from sdcard
-nandroid
-partitions menu
-advanced
- *****Go Back*****
Click to expand...
Click to collapse
Select the bolded in the items in the order in which they appear. After all is wiped, select -install zip from sdcard then pick -choose zip from sdcard and finally navigate to the zipped ROM that you want to install.
33a. From the recovery menu, select the following options and confirm them: "wipe data/factory reset" followed by "wipe cache partition."
33b. After everything is wiped, navigate to "install zip from sdcard," then select "choose zip from sdcard."
33c. Now, navigate to the custom ROM that you downloaded and select it. You will get a progress bar.
34. After the ROM is done installing, press "**Go Back**" and then pick "reboot system now" from the menu.
35. Congratulations again! You are now running a rooted version of the stock ROM (or the custom ROM of your choice). You can restore your apps with Titanium Backup or you can get another custom ROM and flash it exactly the same way that you flashed the stock ROM. I highly recommend Fresh ROM, which can be found in this topic. In fact, ANY custom ROM can be flashed in the same manner that is described in steps 30-34.
35a. Make sure you flash the latest radio update before installing any custom ROMs! It flashes just like a ROM, and you can download it and find any warning information here. Don't dp this yet if you plan on continuing the guide and unlocking NAND because you will have to do it again at the end of the guide.
SECTION V: NESSECARY SOFTWARE INSTALLATION
36. We are going to download and install three pieces of software here: 7-Zip, HTC Sync, and the Android SDK. First, we will install 7-Zip. Navigate to the 7-Zip website (http://www.7-zip.org/download.html) and download the appropriate version for your copy of Windows (either 32 or 64 bit). Install it. In my opinion, this is the best archive utility, and it just makes life easier if we're on the same page.
37. Next, head to the HTC website (http://www.htc.com/us/support/evo-sprint/downloads/) and download the HTC Sync update for Windows. Install it. This should take care of your drivers for 32 or 64 bit.
38. Finally, head to the Android Developers (http://developer.android.com/sdk/index.html) website and select the Windows version of the Android SDK. Agree to the software agreement and save the file.
39. Take the zip file that you just downloaded and copy it to your C: drive as shown.
40. Once the file is copied, right click on it and select 7-Zip then "Extract Files Here." You should now see a folder called "android-sdk-windows" in the root of your C: drive. You've installed the Android SDK successfully.
SECTION VI: INTRODUCTION TO ADB
41. Accessing ADB is very easy. Click on the new android-sdk-windows folder, and you will see a bunch of different folders inside. We're going to be concerned with the "tools" folder, but don't open it!
42. Hold down the shift key and right click the tools folder. Select "Open Command Window Here" from the pop-up list. You have now opened an adb window, and any interaction with your phone will be done through this simple command line. You can copy lines directly from this tutorial and paste them into the command window by right clicking and selecting "Paste" (CTRL+V will not work in the command line).
43. If you want to manually navigate to the adb line (you don't need to do this unless you couldn't get step 42 to work), open a Command Prompt window (Run -> "cmd.exe" on XP/Vista, or just search "Command Prompt" in Windows 7). Now enter the following line of code: cd C:\android-sdk-windows\tools\ . This will take you to the tools folder where you must execute all adb commands.
44. Remember how to get to the adb command prompt. Any time I tell you to enter something via adb take the following steps: Connect your phone via USB, ensure USB Debugging is enabled (Menu -> Settings -> Applications -> Development, but this should be already enabled from the previous steps), and open the command window via either method described in steps 42 or 43. You can find a list of basic adb commands here or by typing "adb help" from the adb command line. You should always be able to directly copy and paste any code that I give you, however.
SECTION VII: UNLOCKING NAND
45. Download Toast's EVO Recovery files here. Save the .zip file anywhere you please. When it is done downloadi ng, right click it, and "Extract Files Here" using 7-Zip again. We are going to use a batch file in this folder to enter a custom recovery mode in a minute.
46. Download the new PC36IMG.zip debug ROM located here. When the menu pops up asking you to save the file, remove the "eng-" off the name so it only reads "PC36IMG". It is very important that you do this before you copy the file to your phone, either now or manually after you save it. NOTE: This is NOT the same image that we used in the first portion of the guide. You MUST download this version.
47. Next, download Toast's custom recovery image located here. Again, right click it and select "save target as." This time delete everything else off the front of the file name so it only reads "recovery".
48. The last two files that you will be downloading are mtd-eng.zip (located here) and flash_image.zip (located here). Once both of these files are downloaded them, right click and "Extract files here" with 7-Zip. You will now have the following files downloaded and extracted:
49. Copy the flash_image, mtd-eng.img, recovery.img, and PC36IMG.zip files to the root of your SD card just as shown below.
50. Now the fun part!! Open an adb window and enter the following code:
Code:
adb reboot recovery
Your phone will now reboot and show the yield sign with the red exclamation point. Don't touch it!
51. Navigate to that "evo-recovery" folder that you extracted earlier and right click on the "recovery-windows" batch file. Select "Run as Administrator" from the menu to execute the file. Another command window will pop up and spew out a bunch of lines. Don't touch it! Just look at your phone which is now in the Amon RA recovery image! If right-clicking doesn't work, try double-clicking to run it normally.
52. Special thanks to Riztnack for the wonderful screens in the follownig sections! Select "Backup and Restore" from the recovery menu. After that select the option to backup your current ROM. You have just performed a nandroid backup. Keep this in mind, becase we are going to restore this after the whole process is over.
53. Select "reboot" from the recovery menu and let your phone boot back up. Make sure you are connected to your computer via USB (you should not be in disk drive mode here or you will get an error), and go back to that same adb window we had open before and used to reboot our device (you can close the window that opened when you ran the batch file). Enter the following lines exactly as they are written, ONE LINE AT A TIME (I recommend copy and pasting):
Code:
adb shell
cat /sdcard/flash_image > /data/flash_image
chmod 755 /data/flash_image
/data/flash_image misc /sdcard/mtd-eng.img
You will get an error message if anything goes wrong in the shell. When you enter the last three commands the window will just repeat them again to confirm that they were executed properly.
54. Now power off your phone just as before. Hold the volume down button as you press power to turn the device on. It will enter the bootloader just as before.
55. Select YES to flash the image, and after it is done flashing select YES to reboot. Don't worry if one of the "TP" options is bypassed. This is normal.
56. Once rebooted, go back to your adb command window and enter the following commands:
Code:
adb shell
cat /sdcard/flash_image > /data/flash_image
chmod 755 /data/flash_image
/data/flash_image recovery /sdcard/recovery.img
reboot recovery
You will get the same confirmations when you enter the 2nd through 4th commands. After you enter the last one the phone SHOULD boot into the same recovery that we were in before. If your phone does NOT boot into recovery, take the following steps: Disconnect from USB, pull the battery, reboot the device, and enter the same adb commands as in step 53. After that, enter lines 2 throuh 5 from step 56. You should now be in recovery. Disclaimer: These were just the steps that I took after my phone did not boot into recovery the first time. They worked for me, so let me know if they work for you or not.
57. Your NAND is now unlocked!! Once your phone boots directly into recovery in step #56, take that as confirmation of success! While in recovery, wipe your user data (factory reset) and wipe the Dalvic cache.
58. Head to the Backup/Restore menu and restore that last nandroid backup that you just did. You can now reboot your phone, and it will be exactly the same as before.
58a. Make sure you flash the latest radio update before installing any custom ROMs! It flashes just like a ROM, and you can download it and find any warning information here. Even if you installed it before, you will have to flash it again because the debug ROM writes an older version.
59. Be sure to rename that PC36IMG.zip to something else like "NAND-PC36IMG.zip" just like you did before so that it doesn't try to boot it every time you enter the bootloader.
60. You can now enter recovery mode by entering the bootloader (holding volume down while powering on the device) and selecting recovery or by using the QuickBoot app (I highly recommend it). You can also use apps like AdFree or Root Explorer to freely edit your /system partition.
I really hoped this guide helped you guys, and I look forward to your feedback.
I'm not going to be asking for any donations because I'm not the one doing all of the work--the devs are the real contributers. I've just taken thier methods and spelled them out in an easy-to-follow way. Those guys work long hours contributing to the community so you should be donating to them.
That's all, folks! I hope you enjoy your root! Big thanks to all of the devs who have made this possible!
Here are some important links with relevant discussions:
Original root guide.
Fake-flash recovery guide.
Stock RUU topic with discussion.
Stock OTA topic with discussion.
How to fix QuickBoot and ROM Manager's rebooting functions on some ROMs.
ADB guide for when you're ready to take the next step.
Making ClockworkMod your permanent recovery.
Original NAND unlock guide.
that's beautiful for noobs
madunix said:
that's beautiful for noobs
Click to expand...
Click to collapse
Thank you!
So this is basically like mixed with Toast's root and unrevoked.
Very well done!
May I make a suggestion?
Maybe change step 24 to
24. Navigate to the PC36IMG.zip file and rename it however you want. This prevents it from running when ever you reboot.
Someone might actually look for debig .zip
will this guide work if i installed the OTA update (version ends in .6 instead of .1)
thanks
MrDSL said:
Very well done!
May I make a suggestion?
Maybe change step 24 to
24. Navigate to the PC36IMG.zip file and rename it however you want. This prevents it from running when ever you reboot.
Someone might actually look for debig .zip
Click to expand...
Click to collapse
Done. Thanks for the input.
jblazea50 said:
will this guide work if i installed the OTA update (version ends in .6 instead of .1)
thanks
Click to expand...
Click to collapse
Yes, I believe it will.
thanks, about to try it out
You might add in on step 26 that you need to switch back to 'charge only' mode for Rom Manager to work, otherwise you get a 'SD card not mounted' error. (at least I did )
Otherwise, great post!
How does one go from Clockwork recovery back to stock recovery?
I love how you have your Drives named.....especially the one for Pirated Stuff. I laughed.
strung said:
How do you go from Clockwork recovery back to stock?
Click to expand...
Click to collapse
You can't permanently flash clockwork yet, it's just temporary until you reboot then the stock recovery goes back. Unless there have been some major developments today.
logosmonkey said:
You might add in on step 26 that you need to switch back to 'charge only' mode for Rom Manager to work, otherwise you get a 'SD card not mounted' error. (at least I did )
Otherwise, great post!
Click to expand...
Click to collapse
Oh yes! Good post!
strung said:
How do you go from Clockwork recovery back to stock?
Click to expand...
Click to collapse
ClockworkMod recovery is actually just that file named update.zip in the root of your memory stick. We can't actually flash a real recovery image yet, so it is tricked into thinking we are flashing an update when we are really going into a recovery image.
worked like a charm; installed damagecontrol .v3 rom
jblazea50 said:
worked like a charm; installed damagecontrol .v3 rom
Click to expand...
Click to collapse
Happy to hear it! Did you do the unrEVOked bit, by chance? I actually never tested that out personally because I was already rooted when I wrote this.
Thanks so much for this. I'm new to android and didn't understand any of the terminology people were using. This is good.
I think my only suggestion would be to skip the initial rom manager install to download the recovery. I couldn't get rom manager to actually download the update.zip and it probably would have saved some time to just download the update.zip in the first place and do it manually. It kept saying it was successfully downloaded when it wasn't.
roybotnik said:
Thanks so much for this. I'm new to android and didn't understand any of the terminology people were using. This is good.
I think my only suggestion would be to skip the initial rom manager install to download the recovery. I couldn't get rom manager to actually download the update.zip and it probably would have saved some time to just download the update.zip in the first place and do it manually. It kept saying it was successfully downloaded when it wasn't.
Click to expand...
Click to collapse
Thanks for the input. Please let me know if anyone else is having problems with ROM manager on the debug ROM, and I will switch it around.
TheBiles said:
Happy to hear it! Did you do the unrEVOked bit, by chance? I actually never tested that out personally because I was already rooted when I wrote this.
Click to expand...
Click to collapse
i went from step 1 to 34, followed all of it; the only thing is i installed a different custom rom; had to install the recovery image as an update.zip
also, i don't think you mentioned in your guide to wipe data/factory reset prior to installing custom rom because when i did it the 1st time, got stuck in a boot loop; then i realized i had to wipe and it worked fine;
oh, also, after the boot loop, i had to do flash the recovery image as update.zip again because it wasn't there when i went back to recovery
I know this a noob question but will this work after the htc update?
I keep hearing mixed things!!!!
Thanks and OMG that was beautiful
jblazea50 said:
i went from step 1 to 34, followed all of it; the only thing is i installed a different custom rom; had to install the recovery image as an update.zip
also, i don't think you mentioned in your guide to wipe data/factory reset prior to installing custom rom because when i did it the 1st time, got stuck in a boot loop; then i realized i had to wipe and it worked fine;
oh, also, after the boot loop, i had to do flash the recovery image as update.zip again because it wasn't there when i went back to recovery
Click to expand...
Click to collapse
Yeah, I added in that data wipe bit not long ago because I forgot to. I wonder why the ROM Manager doesn't work in the debug ROM... I'll definitely just remove that later tonight.
. I don't even want a custom ROM. I just want to be rooted and run stock with rooted google play store apps. Am I there?
I just want to run rooted apps with no ROM flashing...oh god why...where is the guide to root and only root?
You'd think this http://forum.xda-developers.com/show....php?t=1652398 would be where to go to do that, but evidently it's sending me down the road to custom ROM flashing. AGHGHGhjkdashbdas. Do not want.
Ok, so here's where I am, I have finished step 8:
1. Download Odin 1.85 .
2. Download(USE FIREFOX!) ClockworkMod TOUCH 5.5.0.4 OR TWRP 2.2.2.0, they are both named "recovery.tar.md5" and will be downloaded as "recovery.tar.md5", DO NOT CHANGE the filename or else it wont install.
3. Extract the contents of odin-185.zip to a folder.
4. Run Odin 1.85.exe from the folder you extracted it to.
5. Prepare Odin: Check "auto-reboot" and UNCHECK ALL OTHER OPTIONS. SEE COMPUTER SREEN PICS BELOW.
6. Only Click "PDA" and select the recovery.tar.md5 file you downloaded. SEE COMPUTER SREEN PICS BELOW.
7. How To Put your device into Download Mode: DO NOT TOUCH THE POWER BUTTON FOR THIS PROCEDURE. - download mode is NOT the same as recovery mode
a. Connect the USB cable to your PC, but NOT to your phone.
b. Remove the battery.
c. Reinsert the battery.
d. ATT PHONES - Press and keep down both Volume Up and Volume Down keys simultaneously.
ROGERS PHONES - Press and keep down only the Volume Down key.
DO NOT RELEASE THE VOLUME KEY(S) UNTIL INSTRUCTED TO DO SO IN STEP (f)
e. Insert the USB cable into your device. The phone will turn itself on when usb cable is inserted - DO NOT TOUCH THE POWER BUTTON.
f. You will now see a screen w/a yellow triangle warning you about installing a rom . Now release the volume key(s) - SEE PHONE PICS BELOW
g. Press and release the "Volume Up" key to enter into download mode - SEE PHONE PICS BELOW
h. You should now be at the Download Mode screen w/odin recognizing your phone. SEE COMPUTER SREEN PICS BELOW.
8. Click Start in Odin. It will flash the new recovery and will reboot the phone when completed. Your device will autoreboot into android. You are done using ODIN.
9. UPDATING CWM OR TWRP:
Now you need to udate CWM, download and copy cwm6027touch_v14.4.6_skyrocket.zip file to your sdcard, boot into recovery and choose "INSTALL FROM SDCARD" from recovery, install the file and reboot back into recovery to see if it installed correctly.
sk8erwitskil's CWM thread is here HERE , check to see if above file is the latest or dl the "Flashable zip" CWM file from there.
If upgrading TWRP go here HERE and follow the dev's instructions on using goo app, or you can use the flashable TWRP 2.4.1.0 file HERE and copy that file to your sdcard, boot into recovery and pick "INSTALL" from recovery, install the file and reboot back into recovery to see if it installed correctly.
How to enter recovery read section #2 below.
How to use cwm read THIS, also read Q&A on recoveries
You can upgrade to either CWM OR TWRP from which ever recovery TAR file you used in ODIN in step #2 from above.
10. You're done newbie and soon to be a power user, read and educate yourself as much as you can before flashing, happy flashing.
Click to expand...
Click to collapse
I don't know how to do step 9. Do I even need it? I have no desire to run a custom ROM.
yargdpirate said:
OK so here's the list of instructions I'm using to root my Skyrocket:
I have completed everything through step 4. I completely do not understand what to do after that. So, like I'm a 40 year old soccer mom, can you explain what I'm supposed to do to fulfill step 5? Is it through the odin app on my pc? Is this completed on my phone? The link provided that ostensibly explains to noobs how to do this (http://forum.xda-developers.com/showthread.php?t=1777970) doesn't adequately explain to me what I'm doing and where.
Help, please!
Click to expand...
Click to collapse
Assuming that you have successfully installed your custom recovery you then need to know which recovery you installed before you update it. If you used CWM you can get the updated version from the Skyrocket development thread. Put the updated CWM file on your SD card and flash that zip while in recovery. If you used TWRP you can update it through the app that it installed if it did install one. GooManager (someone correct me if I am wrong on the name) I think GooManager needs suoeruser privileges. So which recovery did you flash?
CodeNameRedNeck said:
Assuming that you have successfully installed your custom recovery you then need to know which recovery you installed before you update it. If you used CWM you can get the updated version from the Skyrocket development thread. Put the updated CWM file on your SD card and flash that zip while in recovery. If you used TWRP you can update it through the app that it installed if it did install one. GooManager (someone correct me if I am wrong on the name) I think GooManager needs suoeruser privileges. So which recovery did you flash?
Click to expand...
Click to collapse
Put the updated CWM file on your SD card and flash that zip while in recovery?
Click to expand...
Click to collapse
It's CWM. How do I
A. Put the updated CWM file on my SD card and
B. Flash that zip while in recovery? Is that through Odin, or what?
Thanks
yargdpirate said:
It's CWM. How do I
A. Put the updated CWM file on my SD card and
B. Flash that zip while in recovery? Is that through Odin, or what?
Thanks
Click to expand...
Click to collapse
i think you should stay on stock, read more b4 you brick your phone, no sense in rooting/installing custom roms when you dont know how to install a file on your scard, im not putting you down but trying to give you friendly advice
Vincom has a point. I taught myself through these forums and Google how to do it back in October of 2011. I flashed many a ROM and many files since then until I bricked mine Thursday. Now I have to pay 60 dollars to get it fixed. But on the upside I now have a Note II to play with.
Edit: She is asking for help though and she did ask in the right thread. Some people need more help than others.
vincom said:
i think you should stay on stock, read more b4 you brick your phone, no sense in rooting/installing custom roms when you dont know how to install a file on your scard, im not putting you down but trying to give you friendly advice
Click to expand...
Click to collapse
Oh. ****. I don't even want a custom ROM. I just want to be rooted and run stock with rooted google play store apps. Am I there?
I just want to run rooted apps with no ROM flashing...oh god why...where is the guide to root and only root?
You'd think this http://forum.xda-developers.com/showthread.php?t=1652398 would be where to go to do that, but evidently it's sending me down the road to custom ROM flashing. AGHGHGhjkdashbdas. Do not want.
Ok, so here's where I am, I have finished step 8:
1. Download Odin 1.85 .
2. Download(USE FIREFOX!) ClockworkMod TOUCH 5.5.0.4 OR TWRP 2.2.2.0, they are both named "recovery.tar.md5" and will be downloaded as "recovery.tar.md5", DO NOT CHANGE the filename or else it wont install.
3. Extract the contents of odin-185.zip to a folder.
4. Run Odin 1.85.exe from the folder you extracted it to.
5. Prepare Odin: Check "auto-reboot" and UNCHECK ALL OTHER OPTIONS. SEE COMPUTER SREEN PICS BELOW.
6. Only Click "PDA" and select the recovery.tar.md5 file you downloaded. SEE COMPUTER SREEN PICS BELOW.
7. How To Put your device into Download Mode: DO NOT TOUCH THE POWER BUTTON FOR THIS PROCEDURE. - download mode is NOT the same as recovery mode
a. Connect the USB cable to your PC, but NOT to your phone.
b. Remove the battery.
c. Reinsert the battery.
d. ATT PHONES - Press and keep down both Volume Up and Volume Down keys simultaneously.
ROGERS PHONES - Press and keep down only the Volume Down key.
DO NOT RELEASE THE VOLUME KEY(S) UNTIL INSTRUCTED TO DO SO IN STEP (f)
e. Insert the USB cable into your device. The phone will turn itself on when usb cable is inserted - DO NOT TOUCH THE POWER BUTTON.
f. You will now see a screen w/a yellow triangle warning you about installing a rom . Now release the volume key(s) - SEE PHONE PICS BELOW
g. Press and release the "Volume Up" key to enter into download mode - SEE PHONE PICS BELOW
h. You should now be at the Download Mode screen w/odin recognizing your phone. SEE COMPUTER SREEN PICS BELOW.
8. Click Start in Odin. It will flash the new recovery and will reboot the phone when completed. Your device will autoreboot into android. You are done using ODIN.
9. UPDATING CWM OR TWRP:
Now you need to udate CWM, download and copy cwm6027touch_v14.4.6_skyrocket.zip file to your sdcard, boot into recovery and choose "INSTALL FROM SDCARD" from recovery, install the file and reboot back into recovery to see if it installed correctly.
sk8erwitskil's CWM thread is here HERE , check to see if above file is the latest or dl the "Flashable zip" CWM file from there.
If upgrading TWRP go here HERE and follow the dev's instructions on using goo app, or you can use the flashable TWRP 2.4.1.0 file HERE and copy that file to your sdcard, boot into recovery and pick "INSTALL" from recovery, install the file and reboot back into recovery to see if it installed correctly.
How to enter recovery read section #2 below.
How to use cwm read THIS, also read Q&A on recoveries
You can upgrade to either CWM OR TWRP from which ever recovery TAR file you used in ODIN in step #2 from above.
10. You're done newbie and soon to be a power user, read and educate yourself as much as you can before flashing, happy flashing.
Click to expand...
Click to collapse
I don't know how to do step 9. Do I even need it? I have no desire to run a custom ROM.
For just rooting u have to run the superuser zip through your recovery
Oh and if you are not understanding what the stickies are saying to do then look it up on youtube because there are a lot of step by step instructions there.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
a. put updated file in your micro sd card.... plug ur micro sd card to pc... drag file and drop it in your micro sd card. put the micro sd card back in phone.
b. to go to recovery press power button + vol+ + vol- all at once and hold.
why do u need to unlock play store app? playstore is accessible completely even without root. you can also sideload Amazon appstore and other apps without root. no need to get all bricked up just to run playstore. i'm confused what are you trying to do again?
droidbabyxda said:
a. put updated file in your micro sd card.... plug ur micro sd card to pc... drag file and drop it in your micro sd card. put the micro sd card back in phone.
b. to go to recovery press power button + vol+ + vol- all at once and hold.
why do u need to unlock play store app? playstore is accessible completely even without root. you can also sideload Amazon appstore and other apps without root. no need to get all bricked up just to run playstore. i'm confused what are you trying to do again?
Click to expand...
Click to collapse
im guessing he wants to run apps from play that require root, eg titanuim backup, but he doesnt know how to put a file on his sdcard, but then he has to learn how to install zips from recovery which someones got to teach him since he doesnt want to read/learn/search for the answers. he seems to be impatient and wants it done "now", its a brick waiting to happen, my advice to him was to slowdown and learn
vincom said:
im guessing he wants to run apps from play that require root, eg titanuim backup, but he doesnt know how to put a file on his sdcard, but then he has to learn how to install zips from recovery which someones got to teach him since he doesnt want to read/learn/search for the answers. he seems to be impatient and wants it done "now", its a brick waiting to happen, my advice to him was to slowdown and learn
Click to expand...
Click to collapse
agree and such bad attituted too. i wouldn't want to help anybody who cusses in every conversation geez little respect goes a long way
It you just want to root and not want to flash any custom ROMs or anything related to it,I will tell you how to from total beginning
ALL DATA WILL BE LOST , BACKUP EVERYTHING
In order to root Android 4.2 the following three requirements must be satisfied beforehand:
The Android SDK, which you can download from Google Developers
A custom recovery like ClockworkMod (CWM) or Team Win Recovery Project (TWRP)
SuperSU, which you can download from CF-Root
There are no major differences between the two, but TWRP is more touch-oriented thanks to larger buttons. CWM is also available in a touch-compatible variant, but it has much smaller buttons. It's a matter of personal preference between the two though, but you have to choose one.
Before starting the process I urge you to perform a backup, as all data might be lost afterwards. You can copy the contents of the SD card to a safe external location such as cloud storage service or computer hard drive.
The first step that needs to be performed after all the files are downloaded is to install the Android SDK. Afterwards open the Android SDK Manager and select the following two items:
Android SDK Platform-tools -- it contains the required programs to install Android 4.2 Jelly Bean
Google USB Driver -- it contains the necessary drivers for the Nexus device
Then you should create a folder in an easily accessible location within the command line. In this example I will use a folder named "Root" in my C:\ drive in Windows. The path name will therefore be: "C:\Root".
From the folder where Android SDK Platform-tools is installed (in my case it is "C:\Program Files x86)\Android\android-sdk\platform-tools" copy the following files to the previously created "Root" folder:
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
fastboot.exe
The following files must also be copied to the "Root" folder:
CWM-SuperSU-v0.97.zip -- SuperSU file
The custom recovery that you previously downloaded for your specific device (please see below)
For my 8 GB nexus 7 wifi(codename "grouper" I will use TWRP with the name "openrecovery-twrp-2.3.1.0-grouper.img".
You can easily find the codename for your devoice by looking into Google
The custom recovery file differs for each device, please make sure you download the correct file
In order to make the process smoother for instance the SuperSU file can be renamed to "root.zip" and the custom recovery to "customrecovery.zip". It's a matter of convenience, but for accuracy I will stick to the original naming for this guide.
If the previous steps are completed you must have the following six files in your "Root" folder:
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
fastboot.exe
CWM-SuperSU-v0.97.zip -- SuperSU file
The custom recovery. In my case it is "openrecovery-twrp-2.3.1.0-grouper.img"
From there, you can proceed to install the drivers for "fastboot mode". To install them, follow these steps:
Power off your Nexus device.
Press and hold Volume Up and Volume Down then press and hold the Power button; the device will now enter "fastboot mode".
Go to Device Manager (Computer -> Properties -> Device Manager in Windows 7/8) and identify the device; for me it shows up as Android 1.0.
Right click Android 1.0 and select "Update Driver Software," then select "Browse my computer for driver software".
Select "Let me pick from a list of device drivers on my computer," then click "Next".
From "Have Disk..." option go to the folder where you have Google USB Driver installed (for me it's "C:\Program Files .(x86)\Android\android-sdk\extras\google\usb_driver" and select "android_winusb.inf".
Out of the three options select "Android ADB Interface" and validate any future warning window to install the driver.
Final preparations
Everything is prepared in order to start the installation process, but in order to do so a command window must be opened. Windows Key + R opens "Run"; type in "cmd" and the command window appears. Typing "cd C:\Root" and pressing Enter sets the "Root" folder as the working directory. Pressing the Shift key and right clicking inside the "Root" folder will also deliver the same result.
The device must be turned on in "fastboot mode" which I have explained at step no.2 during the driver installation process, and obviously plugged-in to the computer. You then have to type in the following commands while in "fastboot mode":
fastboot devices -- this is just for verification purposes; if there is no listed device then the drivers have been improperly installed and steps 1 through 7 must be redone.
fastboot oem unlock -> you have to accept the prompt in order to continue -- this command will unlock the bootloader, but it will also erase the data on the device which is why a backup is necessary.
fastboot reboot-bootloader -- this will reboot the bootloader.
fastboot flash recovery openrecovery-twrp-2.3.1.0-grouper.img -- this will flash the custom recovery --please use the specific file and name for your particular Nexus device!
fastboot erase cache -- this will erase the cache -- might not be necessary but it's just as a precaution.
fastboot reboot -- this will reboot the device.
After Android 4.2 is loaded and running the SuperSU file must be copied from the "Root" folder to the internal storage (shows up in Windows Explorer as a Nexus device). A simple copy and paste will do the trick here.
Then you have to power off the Nexus device and enter "fastboot mode" again. Use the Volume Up and Volume Down keys to navigate until you can select "Recovery Mode". After the power button is pressed the device will reboot in the new custom recovery.
Rooting your Nexus device
If you have ClockworkMod installed, you have to perform the following steps:
Select "install zip from sdcard"
Select "choose zip from sdcard"
Select "0" (zero) folder
Select "CWM-SuperSU-v0.97.zip"
Select "Yes - Install CWM-SuperSU-v0.97.zip"
Select "Go Back"
Select "reboot system now"
If you have Team Win Recovery Project installed, you have to perform the following steps:
Press "Install".\
Select "CWM-SuperSU-v0.97.zip" -- for me it's in the "0" (zero) folder
Swipe to confirm flash
Press "Wipe cache/dalvik" (just as a precaution)
Swipe to wipe
Press "Reboot System"
After Android 4.2 loads your device can run apps with elevated privileges (meaning it's rooted). A SuperSU app is installed in order to allow root requests, so please use your judgement on which apps you grant access.
If you experiences any problem, please reply and I will look into it.
Sent from my Nexus 7 using xda app-developers app
Sent from my Nexus 7 using xda app-developers app
^^you want him todo that, lmao, he doesnt even know how to put a file on his sdcard to flash it in recovery, theres no way a computer newb is going to be able to follow what you posted
That's why I have not used the word flash anywhere, I know that he does not know how to flash , I have posted the right thing for a total noob,( at least if he knows how to use command in windows or install drivers)
I helped him in the way I could and what he requested
Sent from my Nexus 7 using xda app-developers app
You think that helped. LOL. Your telling him to do things that aren't even required to gain root with this device. Not everything is a nexus bro. Next time you wanna help study up on the phone your giving advice about. lol
Well , thanks for telling me that every android isn't rooted in same manner, I was thinking that all devices are rooted in same ways like for my nexus
Sent from my Nexus 7 using xda app-developers app
naman14, im not putting you down, your step by step howto is admirable, good work, but the problem is that the op is clueless on tech stuff, its not the word "flash" he has a problem with, i could of said "install" and it would lead to same conclusion, he doesnt know how to copy a file to his sdcard, if he cant do that he has no business in modding his phone until he learns more. anyhow the op is long gone by now
I upgraded my samsung skyrocket s2 version 2.3.6 to 4.0.4 through the Kies. Then I tried to install TWRP 2.2.0 and Odin 1.85. I saw COM 14 ; COM 17 when I hit start button .It said
FAILED. Now it showed a yellow triangle in the middle of phone & monitor pictures. ( including : Firmware upgrade encountered an issue . please select recovery mode in Kies & try again). Please help . Thank you very much.
I just tried other laptop . I saw COM 3 but it said it couldn't open the serial (COM )port . All thread completed (success 0/ failed 1)
To start off everyone should know that messing with your phone can brick it!! You should not mess with your phone if you are unsure of what you are doing. You will get this (or a similar) warning while following the unlock instructions from Motorola as well. Following these instructions also voids your warranty!
I only use Motorola's official firmware for the moment and these instructions were originally performed on the ASA14 firmware. They should be useful for previous versions of the firmware but I will not be testing those. These instructions may not work for releases after ASA14.
While following this guide you need to be on a Windows PC with the administrator account or an account with administrative privileges. If you do not have these privileges you will likely run into issues. All instructions are written for a PC running Windows 7 as that is the only PC I have access to. If anyone has any instructions using a different version of Windows I will gladly add them in.
Windows commands:
dir - Lists all directories (folders) and files of the directory you are currently in.
cd {directory name} - Moves into the named directory. The directory names are case-sensitive.
cd.. - Moves to the directory before the one you are currently in. For instance if you are in C:\Users\Public and perform cd.. you will move to C:\Users
{Unlocking the Bootloader}
I'm writing this pretty late and formatting takes forever so I'll update this section later with my own set of instructions. For now use this guide which I plan on using for inspiration since I can't really repeat the unlock process.
Below is my work in progress. This is incomplete and will be unhidden when it is completed.
Updated Unlock
1. Download the Android SDK
2. Unzip the file. If you don't have a program to unzip the file 7-zip is great.
3. Move the unzipped folder to a location that is easy to locate. For me I put this in "Documents".
4. Rename the folder to something shorter, that way it's easier to type in later. "ADT" is easy to use and remember.
5. Download the drivers for the phone.
6. Open "MotorolaDeviceManager_2.3.9.exe" and install the drivers.
7. Go here
8. Click "PROCEED ANYWAY"
9. Register an account with Motorola.
10. Go to Start > All Programs > Accessories
11. Open “Command Prompt”
12. Use the cd commands to navigate to your “platform-tools” folder.
13. Turn off your phone (power button + volume down if you can't select any options to turn off the phone)
14. Turn it back on using the power button + volume up + volume down combination
15. Select “Fastboot” (volume down cycles through, volume up selects the option)
16. Connect your phone to your PC.
17. Type "fastboot oem get_unlock_data" in Command Prompt.
{Installing a New Recovery}
For the recovery we’re going to install the Photon Q Open Recovery. Every recovery has its advantages and disadvantages. This one is familiar to me and so I chose it for this guide.
1. Download the recovery image
2. Place the image in the Android SDK “platform-tools” folder which is in the "sdk" folder
3. Turn off your phone (power button + volume down if you can't select any options to turn off the phone)
4. Turn it back on using the power button + volume up + volume down combination
5. Select “Fastboot” (volume down cycles through, volume up selects the option)
6. Connect your phone to your PC
7. Go to Start > All Programs > Accessories
8. Right-click “Command Prompt”
9. Click “Run as administrator”
10. Use the cd commands to navigate to your “platform-tools” folder (Unfortunately I cannot tell you where this is as each computer will have it placed differently)
11. Type in “fasboot flash recovery open_recovery_206_05_06_2013.img”
{Getting Root}
1. Download the zip file for rooting
2. Place the file in the root (ie. not within a folder) of your phone’s SD card
3. Turn your phone off
4. Turn it back on using the power button + volume up + volume down combination
5. Select “Recovery” (volume down cycles through, volume up selects the option)
6. Select “Apply Update” (In recovery the the controls change. Volume up and volume down move in the list, the camera button at the bottom right of the device selects.)
7. Select the file you placed on your SD card from step 2
8. Wait for the update to apply, it should say that it finished successfully
9. Select “Reboot Phone”
Credit for all of this goes to their respective creators. I will name them all by name at a later date, but the credit can also be found following the linked material. Hopefully that doesn't bother the creators, writers, or hosts.
The Open Recovery port was done by Skrilax_CZ.
SuperSU is hosted by shabbypenguin and developed by Chainfire.
Please don't re-post this how-to without crediting. I've had it happen before and it was a huge disincentive for updating and making new guides.
section "{Installing a New Bootloader}" and "1. Download the bootloader image" below it are actually reffering to recovery (probably the best one out there). Not a bootloader.
Bootloader boots the system. Depending on keys pressed during boot (if any, or if instructed by commands) it can boot to bootloader menu, recovery, system (android)...
Ah, thanks. I would have known that if I rechecked but I haven't had time to.
Edit:
While I was editing I noticed I referenced it as recovery multiple times and was switching between the two as the guide went on!
unlocking bootloader failed
ok so i got the device id went to the motorola site said it was good got the unlock key did the step and typed it in the command prompt and it says
(bootloader) password incorrect
(bootloader) oem unlock failure
FAILED <remote failure>
sorry if this is a noob question usualy dont post first time last time i rooted a fone was on an evo 4g so never really messed with command prompts and unlock keys to much i repeted the whole process 3 times already and i still get the same message
edit: nvm got it to work hahaha forgot to capslock the letter in the key thanks for the write up man
demi_god_619 said:
ok so i got the device id went to the motorola site said it was good got the unlock key did the step and typed it in the command prompt and it says
(bootloader) password incorrect
(bootloader) oem unlock failure
FAILED <remote failure>
sorry if this is a noob question usualy dont post first time last time i rooted a fone was on an evo 4g so never really messed with command prompts and unlock keys to much i repeted the whole process 3 times already and i still get the same message
edit: nvm got it to work hahaha forgot to capslock the letter in the key thanks for the write up man
Click to expand...
Click to collapse
Yeah, unfortunately there's are a few points where unlocking get's confusing. I had to enter my stuff from the command prompt to Motorola's site like 5 times before I figured out where the copy/paste had spaces. It took me a while to figure out I had pasted an extra space at the end. This was the first phone for Motorola's bootloader unlock plan so I'm hoping they improve on it for their future phones.
The OP is updated with some more color-coding, updated credits (though I didn't try to get everyone just yet), and changed the link to an updated SuperSU. This should work on the Jellybean update though I won't know for sure unless someone confirms it in this thread. I've taken a break from messing with my personal phone for a while so I won't be checking the boards as often but I'll still be checking every few days.
Solust said:
The OP is updated with some more color-coding, updated credits (though I didn't try to get everyone just yet), and changed the link to an updated SuperSU. This should work on the Jellybean update though I won't know for sure unless someone confirms it in this thread. I've taken a break from messing with my personal phone for a while so I won't be checking the boards as often but I'll still be checking every few days.
Click to expand...
Click to collapse
FYI, if you install TWRP it will detect whether you have root or not and offer to install it for you.
Simplifies the guide a bit, and IMHO TWRP is a great recovery - all touch based, no more mashing the volume keys .
Nicely done regardless.
I noticed I was missing a step in the {Getting Root} section. It was an implied step but I added it for clarity.
I also had forgotten to mention that once you get into recovery the buttons used to control things change slightly. You can use the keyboard in addition to the device buttons.
Thanks for the How-to!:good: I was wondering if you would mind if I gave you or added some instructions for Linux users?
xaelith said:
Thanks for the How-to!:good: I was wondering if you would mind if I gave you or added some instructions for Linux users?
Click to expand...
Click to collapse
Yeah that would be fine. PM me the instructions and I'll test them out on my Linux partition. It'll probably take a few days as I have things coming up.
I've updated the links in the OP to Open Recovery 2.06 (changing the name in the command accordingly) and started writing my own set of bootloader unlock steps. They aren't complete yet but if someone is having troubles understanding the first few steps of the linked article mine should be broken down to be a bit easier to digest.
Solust said:
I've updated the links in the OP to Open Recovery 2.06 (changing the name in the command accordingly) and started writing my own set of bootloader unlock steps. They aren't complete yet but if someone is having troubles understanding the first few steps of the linked article mine should be broken down to be a bit easier to digest.
Click to expand...
Click to collapse
Open Recovery is on version 2.09 now. Has anyone tried it? I tried it using the posted steps but I got the same result as when I tried cmwrecovery, the phone doesn't boot to it, it boots to an image of the android guy on his back with his belly open and a red exclamation point hovering over him. Any advise? It's a Photon Q using Android version 4.1.2 nand I have successfully unlocked the bootloader.
I never changed versions because most of the updates target Kit-Kat based custom ROMs. Make sure your phone is NOT plugged in when you try to get into recovery. If it doesn't work when not attached to anything re-download the recovery and try installing again.
Entomology onsaboo
Solust said:
I never changed versions because most of the updates target Kit-Kat based custom ROMs. Make sure your phone is NOT plugged in when you try to get into recovery. If it doesn't work when not attached to anything re-download the recovery and try installing again.
Click to expand...
Click to collapse
I have tried to get into recovery both plugged in and not plugged in. I tried downloading and re downloading both CMWrecovery and open recovery 2.09 both.
Are you saying Open Recovery 2.09 is targeted at Kit-Kat custom ROMs and won't work on my phone? Should I try the version in your OP?
It should work in theory regardless of Kit-Kat, but if you've already tried all of that then give the older version a shot. I really post only what I know and have tried in the original post. It's beyond the scope of my thread though so you may have better luck asking in the recovery threads if you can't get any version to work. I'm on my phone for the time being or I would link you to the appropriate threads myself.
Solust said:
It should work in theory regardless of Kit-Kat, but if you've already tried all of that then give the older version a shot. I really post only what I know and have tried in the original post. It's beyond the scope of my thread though so you may have better luck asking in the recovery threads if you can't get any version to work. I'm on my phone for the time being or I would link you to the appropriate threads myself.
Click to expand...
Click to collapse
I couldn't fine a copy of the older version anywhere.
I understand, and I thank you for your help.
Solust said:
To start off everyone should know that messing with your phone can brick it!! You should not mess with your phone if you are unsure of what you are doing. You will get this (or a similar) warning while following the unlock instructions from Motorola as well. Following these instructions also voids your warranty!
I only use Motorola's official firmware for the moment and these instructions were originally performed on the ASA14 firmware. They should be useful for previous versions of the firmware but I will not be testing those. These instructions may not work for releases after ASA14.
While following this guide you need to be on a Windows PC with the administrator account or an account with administrative privileges. If you do not have these privileges you will likely run into issues. All instructions are written for a PC running Windows 7 as that is the only PC I have access to. If anyone has any instructions using a different version of Windows I will gladly add them in.
Windows commands:
dir - Lists all directories (folders) and files of the directory you are currently in.
cd {directory name} - Moves into the named directory. The directory names are case-sensitive.
cd.. - Moves to the directory before the one you are currently in. For instance if you are in C:\Users\Public and perform cd.. you will move to C:\Users
{Unlocking the Bootloader}
I'm writing this pretty late and formatting takes forever so I'll update this section later with my own set of instructions. For now use this guide which I plan on using for inspiration since I can't really repeat the unlock process.
Below is my work in progress. This is incomplete and will be unhidden when it is completed.
Updated Unlock
1. Download the Android SDK
2. Unzip the file. If you don't have a program to unzip the file 7-zip is great.
3. Move the unzipped folder to a location that is easy to locate. For me I put this in "Documents".
4. Rename the folder to something shorter, that way it's easier to type in later. "ADT" is easy to use and remember.
5. Download the drivers for the phone.
6. Open "MotorolaDeviceManager_2.3.9.exe" and install the drivers.
7. Go here
8. Click "PROCEED ANYWAY"
9. Register an account with Motorola.
10. Go to Start > All Programs > Accessories
11. Open “Command Prompt”
12. Use the cd commands to navigate to your “platform-tools” folder.
13. Turn off your phone (power button + volume down if you can't select any options to turn off the phone)
14. Turn it back on using the power button + volume up + volume down combination
15. Select “Fastboot” (volume down cycles through, volume up selects the option)
16. Connect your phone to your PC.
17. Type "fastboot oem get_unlock_data" in Command Prompt.
{Installing a New Recovery}
For the recovery we’re going to install the Photon Q Open Recovery. Every recovery has its advantages and disadvantages. This one is familiar to me and so I chose it for this guide.
1. Download the recovery image
2. Place the image in the Android SDK “platform-tools” folder which is in the "sdk" folder
3. Turn off your phone (power button + volume down if you can't select any options to turn off the phone)
4. Turn it back on using the power button + volume up + volume down combination
5. Select “Fastboot” (volume down cycles through, volume up selects the option)
6. Connect your phone to your PC
7. Go to Start > All Programs > Accessories
8. Right-click “Command Prompt”
9. Click “Run as administrator”
10. Use the cd commands to navigate to your “platform-tools” folder (Unfortunately I cannot tell you where this is as each computer will have it placed differently)
11. Type in “fasboot flash recovery open_recovery_206_05_06_2013.img”
{Getting Root}
1. Download the zip file for rooting
2. Place the file in the root (ie. not within a folder) of your phone’s SD card
3. Turn your phone off
4. Turn it back on using the power button + volume up + volume down combination
5. Select “Recovery” (volume down cycles through, volume up selects the option)
6. Select “Apply Update” (In recovery the the controls change. Volume up and volume down move in the list, the camera button at the bottom right of the device selects.)
7. Select the file you placed on your SD card from step 2
8. Wait for the update to apply, it should say that it finished successfully
9. Select “Reboot Phone”
Credit for all of this goes to their respective creators. I will name them all by name at a later date, but the credit can also be found following the linked material. Hopefully that doesn't bother the creators, writers, or hosts.
The Open Recovery port was done by Skrilax_CZ.
SuperSU is hosted by shabbypenguin and developed by Chainfire.
Please don't re-post this how-to without crediting. I've had it happen before and it was a huge disincentive for updating and making new guides.
Click to expand...
Click to collapse
I got an error when I clicked on the recovery image download link. Is there a better method?
EpicSaga said:
I got an error when I clicked on the recovery image download link. Is there a better method?
Click to expand...
Click to collapse
See the OpenRecovery thread for a valid link to that recovery... the links are a bit outdated for OR, look near the end of the thread.
I have the link to the Open Recovery thread at the very start of the section about installing recovery. It's there in case links die, someone wants more info on what they're installing, or someone has support questions pertaining to Open Recovery. This thread didn't seem to be very popular compared to one I made for an older phone so I haven't kept it up to date. The phone has been out for some time as well so I likely won't be updating this thread.
THIS WILL VOID YOUR WARRANTY OR MAY BRICK YOUR PHONE IF NOT DONE CORRECTLY.
I made this because i wanted to play AR games on an unsupported phone, so i want to help other people.
Follow this tutorial CLOSELY, or you'll mess up your phone
WARNING: THIS POST IS DIVIDED IN TO PARTS, IF YOU'RE HERE FOR THE A20e ROOT GUIDE, PLEASE CLICK (Coming soon)
1.0: Preparing.
1. Get your firmware from Sammobile or other sites
Get the NEWEST firmware that is from YOUR COUNTRY.
2. Download and install samsung mobile drivers.
3. Download ODIN Flash tool.
1.1: Unlocking your bootloader.
From this point on, you are taking a risk. You will void your warranty if you continue, i cant stress this enough.
1. Open the settings app, and navigate to: Device Info>Software Information and press Build number 7 times in a row. You will now have access to the developer settings.
2. Navigate back to settings, scroll down and press on "Developer settings"
3. Now, you should see a button called "OEM Unlock". PRESSING THIS WILL WIPE ALL OF YOUR DATA. (Which is normal.)
4. Go through the inital setup, and dont enter your data YET. Dont turn on wifi aswell, since youre going to wipe your data again later.
5. Now, turn off your phone.
6. When your phone is turned off, hold the Volume UP and DOWN button, and plug in your USB-Type C cable.
7. Now, hold the volume UP button for 8 seconds, until the screen changes. Press the volume UP button afterwards. Your data will get wiped again.
8. Go through the initial setup AGAIN, connect to wifi, but DONT enter your google/samsung account data just yet.
You have now unlocked your bootloader.
1.2: Unpacking your boot image.
1. Once you have the firmware, extract it using 7-Zip (Or any other extraction program).
2. You should now have a file called "boot.img.lz4"
3. Download the LZ4 Program on Github.
4. -Extract the zip in any EMPTY folder.
-Put the "boot.img.lz4" into the folder.
-Open CMD. Navigate to the folder you extracted LZ4 into.
- use this command to extract it: "lz4.exe -d boot.img.lz4 boot.img
- Done, now put the "boot.img" to your phone storage.
1.3: Patching the boot image.
1. After you copied the "boot.img" to your phone storage, open magisk manager.
2. Now, select the Install button on the TOP. Press "Patch an image"
3. Select the "boot.img" file you copied from your PC.
4. Wait.
5. Done. Copy the "magisk_patched.img" file to your computer.
6. Convert the ".img" file into a ".tar" file.
2.0: Rooting: Flashing the .tar to your phone.
Follow closely.
1. Turn off your phone, and hold the volume UP and Power button at the same time. After you booted into the recovery, select "reboot into bootloader".
2. Open odin, and firstly go to "options" and untick "Auto reboot". Then, press the "AP" Slot, and select the "magisk_patched.tar" file.
3. Connect your USB Cable, and press "start".
4. it should now say "PASS"
2.1: Rooting
1. hold the volume DOWN and Power button for 7 seconds.
2. QUICKLY hold the volume UP and Power button
3. Select "Wipe data". Press yes.
3. Now, go through the initial setup. You can now enter your data, since we arent wiping our phone anymore.
3. Final Touches
1. Download Magisk Manager again. Open it, and it will install a zip. It will automatically restart.
2. Open magisk manager. If there is a GREEN tick on the top, Well done! You've made it!
You are done with rooting your phone! you can now leave, or continue if you want to play AR games.
Other: AR Compatibility
1. Open magisk manager, press the 3 lines on the top left, and select "downloads"
2. Search "ARCore"
3. Install it, and reset your phone.
4. Now, go to the play store and install "ARCore"
5. You have AR access! Download games like "FNaF AR" or anything else.
This guide will get updated every week.
anyone can confirm this'll work?
Chiryn said:
anyone can confirm this'll work?
Click to expand...
Click to collapse
I tried it, but it didn't work. I think I downloaded a bad firmware tho. I am going to try it now. Btw. if you want an easy firm download I highly recomend Frija v.1.3.0. - only easy, fast and WORKING (at least for me) firmware downloader.
I am stuck at odin saying NAND Write Start!!.
Could anyone help me?
Hi, in this guide I will help you to root, install the TWRP, and install LineageOS 17.1 (or any custom ROM for this tablet).
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
This firmware was developed for the p905. It doesn't apply to the p905v at this time because it's bootloader locked and a custom recovery isn't possible.
Doing this you will delete all you file, so before starting save you important data in a different device.
DOWNLOADINGDownload this .zip that have all the required files: https://drive.google.com/file/d/1aXfW2WoNER0kKRUc6dn0Odu3VW2swNA7/view?usp=share_link
Extract the folder in the Desktop for better agility.
STARTINGOpen the folder previously extracted, and run as administrator the .exe "Samsung-Usb-Driver-v1.5.59.0". Now you downloaded the Samsung drivers.
Now run as administrator the .exe "adb-setup-1.4.3 run as admin": Answer yes for every step asked.
Remember to install the GAPPS from here (i didn't put them in the .zip file because uses al lot of space): https://opengapps.org/ (select the ARM and Android version, that in this case is Android 10.0, and I choosed the nano version, but you can select which you want in base of included app: https://gapps4android.wordpress.com/2016/03/20/gapps-package-comparison-which-to-choose/ ).
Store the .zip with the gapps in the tablet, in some location that you will remember.
In the extracted folder you will find the rom .zip file of the LineageOS 17.1, do the same as for the GAPPS .zip, so copy it in the tablet in a folder that you will remember.
This process will NOT require the OEM unlock, because Odin will do it for you.
Be sure to have enabled the USB debug in the Developer Options. Plug the tablet in the PC and be sure that the tablet ask you to enable USB DEBUG via your PC. Is no pop-up is asking you this, open the folder extracted, go to "fastboot" and open a CMD in this location, and type the command: "adb devices" this will trigger the tablet to ask you to allow the USB debugging via your PC.
ROOTINGPut the Samsung Galaxy Note pro 12.2 in the Downloading mode:
1. turn off the device completely.
2. hold down the POWER key and the volume DOWN key.
3. when you come out a screen with a yellow triangle and an exclamation mark and asking if you want to be sure to enter the Downloading mode (also called Odin Mode), to agree click the volume UP button.
Meanwhile start Odin (the file .exe called "Odin3-v3.10.6" that is in the extracted folder) as administrator.
Now plug the Galaxy Note pro in the PC and you will se now a message in the left box saying something like: "<ID:0/005> Added!!" the number is based on the COM port that your tablet is now connected (in my case was 5).
Now click on the button "AP" (that should be the only one clickable) and select the file "CF-Auto-Root-viennalte-viennaltexx-smp905.tar" in the main extracted folder.
Finally now click START. In my case took 5 minutes to complete.
When the process ends, the tablet will reboot automatically, and in the apps you will see an app called "superSU". If you see this app, you successfully rooted you device!
Open the new app and it will ask you if you disable Xnox and you will click yes, or ok.INSTALLING TWRPWe will install TWRP in the Easy way, from the Play Store. So open the Play Store and download the officiall TWRP app.
Once downloaded, open the app. If the app ask for request from superSU you will need to GRANT.
Ok, now click on the "Select Device" and choose our tablet, the Galaxy Note Pro 12.2, and choose the latest .img avaible. It will ask you to download, so you click OK and it will open the browser and download the image file (should be called like "twrp-3.0.2-0-viennatlexx.img"). Remember where it got downloaded and return in the TWRP app. Now click on "Select a file to flash.." and select the image file now downloaded. Finally click on "FLASH TO RECOVERY" and in the pop-up click OKAY.
You should get a screen saying "Flash completed successfully!".INSTALLING LINEAGEOS (or any rom)Boot in the TWRP mode by connecting the device to the PC, opening the folder "fastboot" in the firstly .zip downloaded and opening the cmd in that location. Once you opened the cmd, type "adb devices" and now you should see you device. Now type the command: "adb reboot recovery". Your device will shutdown and automatically restart in the TWRP mode.
From here you can follow any Tutorial in the web to install the rom and the gapps.
But if you want to install now the rom LineageOS 17.1, continue following this guide.
Once you are in the TWRP mode, click "Wipe" and go to "Advanced Wipe" and select only the checkboxes "Davlik Cache", "System", "data" and "Cache". Now swipe to wipe.
Now go back in the main page, and click "Install" and navigate where you have the ROM .zip file stored of the LineageOS rom. When you find it click on it and Swipe to confirm Flash.
Now DO NOT reboot the system, go back and Flash in the same manner the .zip file with the GAPPS. After flashing the GAPPS, remember to click on the button "Wipe cache/dalvik".
NOW FINALLY CLICK ON THE BUTTON REBOOT SYSTEM. And here you go, that's how I upgraded from Android 5.0.2 to Android 10 for my tablet Samsung Galaxy Note Pro 12.2 SM-P905.CONCLUSIONI only wanted to share my experience, because I had really hard time trying the upgrading becuase internet was not really clear about this.
If you have any problem I will try help you in this Thread, but i'm not an expert, i'm only a guy that searched the web alone.
Buona fortuna a tutti e Arrivederci!
Thank you!